Controllable Fabrication of Amorphous Co-Ni Pyrophosphates for Tuning Electrochemical Performance in Supercapacitors

Fabrication of Mesoporous Materials Based on Supramolecular Self-Assembly of Guanosine Monophosphonate-Nickel Chloride (GMP-Ni) for High-Performance Hybrid Supercapacitors

Supramolecular self-assembly of nickel chloride and guanosine mono-phosphonate (GMP) and nickel (Ni)-based GMP-Ni and their calcinated mesoporous electrode materials GMP-Ni-500 and GMP-Ni-700 at 500 and 700 °C, respectively, have been fabricated. GMP-Ni, GMP-Ni-500, and GMP-Ni-700 are examined for their supercapacitor performance in a three-electrode configuration. The electrochemical tests demonstrate the mesoporous battery-type nature of GMP-Ni-500 which exhibited a specific capacity (Cs) of about 289 C g-1 at 0.5 A g-1 current density. In addition, a cost-effective and simple asymmetric supercapacitor device has been fabricated with battery-type GMP-Ni-500 as a cathode material and capacitive-type activated carbon (AC) as an anodic material. In an operating voltage window of 0 to 1.5 V, hybrid supercapacitors (HSCs) based on GMP-Ni-500//AC exhibited a remarkable performance with a specific capacity (Cs) of 144 C g-1 at 0.5 A g-1. For the HSC device, the maximum of 66% capacity retention has been observed after 5000 charging/discharging cycles at 5 A g-1. Furthermore, the HSC device demonstrates a high energy density of 24 W h kg-1 at a power density of 297 W kg-1. The molecular transformation was established by employing theoretical calculations. These results suggest that our HSC has outstanding potential in technology development for next-generation commercial applications.

Tuning the d-Band States of Ni-Based Serpentine Materials via Fe3+ Doping for Efficient Oxygen Evolution Reaction

The serpentine germanate materials are promising oxygen evolution reaction (OER) electrocatalysts due to their unique layered crystal structure and electronic structure. However, the catalytic activities still need to be improved to satisfy the practical applications. Adjusting the d-band center of metal active site to balance the adsorption and desorption of intermediates is considered an effective approach to improve the OER activity. In this work, an element dopant strategy was proposed to optimize the d-band state of Ni₃Ge₂O₅(OH)₄ serpentine to improve the OER activity. The density functional theory calculations revealed that Fe³⁺ doping increased the d-band center of the Ni₃Ge₂O₅(OH)₄ serpentine, which optimized the adsorption strength of intermediates on surface Ni and Fe atoms so that the Fe³⁺ doped Ni₃Ge₂O₅(OH)₄ (Ni_2.25Fe_0.75Ge₂O₅(OH)₄) exhibited much reduced Gibbs free energy changes in the rate-determining step compared with pristine serpentine. Inspired by the theoretical calculations, the Ni_xFe_3-xGe₂O₅(OH)₄ nanosheets with different amounts of doped Fe³⁺ were designed and synthesized. The structural characterizations indicated that Fe³⁺ was successfully doped into Ni₃Ge₂O₅(OH)₄ and replaced the Ni²⁺. The Fe³⁺ doped Ni_xFe_3-xGe₂O₅(OH)₄ nanosheets showed greatly improved OER activity than Ni₃Ge₂O₅(OH)₄ and Fe₃Ge₂O₅(OH)₄. Further electrochemical analysis illustrated that Fe³⁺ doping reduced the adsorptive/formative resistance of intermediates and the charge transfer resistance and facilitated the kinetic process of OER. The in situ Raman spectra indicated that the Fe³⁺ doped Ni₃Ge₂O₅(OH)₄ possesses a more active Ni-O bond than pristine Ni₃Ge₂O₅(OH)₄. This work provides an effective strategy to tune the d-band center of serpentines for efficient electrocatalytic OER.

Ternary NiCeCo-Layered Double Hydroxides Grown on CuBr2@ZIF-67 Nanowire Arrays for High-Performance Supercapacitors

Ternary layered double-hydroxide-based active compounds are regarded as ideal electrode materials for supercapacitors because of their unique structural characteristics and excellent electrochemical properties. Herein, an NiCeCo-layered double hydroxide with a core-shell structure grown on copper bromide nanowire arrays (CuBr₂@NCC-LDH/CF) has been synthesized through a hydrothermal strategy and calcination process and utilized to fabricate a binder-free electrode. Due to the unique top-tangled structure and the complex assembly of different active components, the prepared hierarchical CuBr₂@NCC-LDH/CF binder-free electrode exhibits an outstanding electrochemical performance, including a remarkable areal capacitance of 5460 mF cm^-2 at 2 mA cm^-2 and a capacitance retention of 88% at 50 mA cm^-2 as well as a low internal resistance of 0.163 Ω. Moreover, an all-solid-state asymmetric supercapacitor (ASC) installed with CuBr₂@NCC-LDH/CF and activated carbon electrodes shows a high energy density of 118 Wh kg^-1 at a power density of 1013 W kg^-1. Three assembled ASCs connected in series can operate a multifunctional display for over three and a half hours. Therefore, this innovative work provides new inspiration for the preparation of electrode materials for supercapacitors.

High Energy Density in Combination with High Cycling Stability in Hybrid Supercapacitors

Hybrid supercapacitors are considered the next-generation energy storage equipment due to their superior performance. In hybrid supercapacitors, battery electrodes need to have large absolute capacities while displaying high cycling stability. However, enhancing areal capacity via decreasing the size of electrode materials results in reductions in cycling stability. To balance the capacity-stability trade-off, rationally designed proper electrode structures are in urgent need and still of great challenge. Here we report a high-capacity and high cycling stability electrode material by developing a nickel phosphate lamination structure with ultrathin nanosheets as building blocks. The nickel phosphate lamination electrode material exhibits a large specific capacity of 473.9 C g^-1 (131.6 mAh g^-1, 1053 F g^-1) at 2.0 A g^-1 and only about 21% capacity loss at 15 A g^-1 (375 C g^-1, 104.2 mAh g^-1, 833.3 F g^-1) in 6.0 M KOH. Furthermore, hybrid supercapacitors are constructed with nickel phosphate lamination and activated carbon (AC), possessing high energy density (42.1 Wh kg^-1 at 160 W kg^-1) as well as long cycle life (almost 100% capacity retention after 1000 cycles and 94% retention after 8000 cycles). The electrochemical performance of the nickel phosphate lamination structure not only is commensurate with the nanostructure or ultrathin materials carefully designed in supercapacitors but also has a longer cycling lifespan than them. The encouraging results show the great potential of this material for energy storage device applications.

Manipulation on Two-Dimensional Amorphous Nanomaterials for Enhanced Electrochemical Energy Storage and Conversion

Low-carbon society is calling for advanced electrochemical energy storage and conversion systems and techniques, in which functional electrode materials are a core factor. As a new member of the material family, two-dimensional amorphous nanomaterials (2D ANMs) are booming gradually and show promising application prospects in electrochemical fields for extended specific surface area, abundant active sites, tunable electron states, and faster ion transport capacity. Specifically, their flexible structures provide significant adjustment room that allows readily and desirable modification. Recent advances have witnessed omnifarious manipulation means on 2D ANMs for enhanced electrochemical performance. Here, this review is devoted to collecting and summarizing the manipulation strategies of 2D ANMs in terms of component interaction and geometric configuration design, expecting to promote the controllable development of such a new class of nanomaterial. Our view covers the 2D ANMs applied in electrochemical fields, including battery, supercapacitor, and electrocatalysis, meanwhile we also clarify the relationship between manipulation manner and beneficial effect on electrochemical properties. Finally, we conclude the review with our personal insights and provide an outlook for more effective manipulation ways on functional and practical 2D ANMs.

Cobalt-Nickel Phosphate Composites for the All-Phosphate Asymmetric Supercapacitor and Oxygen Evolution Reaction

Recently, design of cost-effective multifunctional electromaterials for supercapacitors and oxygen evolution reaction (OER) and enhancing their functionalities have become an emphasis in energy storage and conversion. Herein, a series of cheap and functional phosphate composites with different ratios of cobalt and nickel are synthesized using a simple polyalcohol refluxing method, and their excellent capacity and OER properties are systematically studied. Notably, owing to the different major role of Co and Ni elements in the phosphate composites for capacity and OER, the optimal electroconductibility, structural adjustment, electrochemical active sites, and activities for capacity and OER are obtained from the composites with the different ratios of Co/Ni. In addition, using high-capacity BiPO₄ (BPO) as the negative electrodes, the new type of all-phosphate asymmetric supercapacitor (CNPO-40//BPO) shows a high energy density and reaches 36.84 W h kg^-1 at a power density of 254.52 W kg^-1. Its cyclic stability is also more excellent than that of the CNPO-40//AC device using commercial activated carbon as the negative electrodes. This study is beneficial to the more in-depth research on efficient dual-function electromaterials in capacity and OER and provides a high-efficient way to improve the practicality of asymmetric supercapacitors using the high-capacity Bi-based electromaterials as the negative electrodes.

Epoxidized Block and Statistical Copolymers Reinforced by Organophosphorus-Titanium-Silicon Hybrid Nanoparticles: Morphology and Thermal and Mechanical Properties

Glycidyl methacrylate (GMA) and a mixture of alkyl methacrylates (average chain length of 13 carbons; termed C13MA; derived from vegetable oils) were copolymerized by nitroxide-mediated polymerization to form epoxidized statistical and block copolymers with similar compositions (F GMA ∼0.8), which were further cross-linked by a bio-based diamine. Hybrid plate-like nanoparticles containing organophosphorus-titanium-silicon (PTS) with an average size of ∼130 nm and high decomposition temperature (485 °C) were synthesized via a hydrothermal reaction to serve as additives to simultaneously enhance the thermal and mechanical properties of the blend. Nanocomposites filled with PTS were prepared at different filler-loading levels (0.5, 2, 4 wt %). Transmission electron microscopy (TEM) of the cured block copolymer displayed reaction-induced macrophase-separated domains. TEM also showed an effective dispersion of PTS hybrids in the matrix without intense agglomeration. Thermogravimetric analysis at different heating rates revealed the activation energy of poly (GMA-stat-C13MA) at maximum decomposition increased from 143.5 to 327.2 kJ mol-1 with 4 wt % PTS. Decomposition temperature and char residue improved 12 °C and ∼7 wt %, respectively, and T g increased 12 °C by adding 4 wt % PTS. Targeting various PTS concentrations enabled tuning of the tensile modulus (up to 75%), tensile strength (up to 46%), and storage modulus in both glassy state (up to 59%) and rubbery plateau regions (up to 88%). Oscillatory frequency sweeps indicated that PTS makes the storage modulus frequency dependent, suggesting that the inclusion of the nanoparticles alters the relaxation of the surrounding matrix polymer.

Regulating Oriented Adsorption on Targeted Nickel Sites for Antibiotic Oxidation with Simultaneous Hydrogen Energy Recovery by a Direct Electrochemical Process

The efficiency of antibiotic oxidation by direct electrochemical processes based on transition metal electrodes is largely restricted by the adsorption capacity for single molecules on targeted active sites. Inspired by density functional theory (DFT) calculations, we found that the adsorption energy of sulfanilamide molecules on Ni sites could be markedly changed by regulating the local atomic environment of the Ni atoms (for NiCo₂O₄ and NiCoP, ΔG_Ni = -0.11 and +0.47 eV, respectively). The high electronegativity of oxygen changed the electron cloud density around the Ni atoms, leading to an oriented adsorption of SA on Ni sites. Moreover, the oriented adsorption on Ni sites occurs not only on NiCo₂O₄ but on the in situ-generated Ni^IIIOOH (ΔG_Ni = -0.09 eV). Consequently, utilizing NiCo₂O₄ as the anode resulted in superior removal performance (97% vs 55% efficiency) for SA oxidation, with a kinetic constant ∼10 times higher than that of NiCoP (0.031 min^-1 vs 0.0029 min^-1). Meanwhile, non-oriented adsorption reduced the competition between SA molecules and H⁺ for active sites, which benefitted the activity of the hydrogen evolution reaction at the NiCoP cathode (68 mV at j = 10 mA·cm^-2, 0.5 mmol·L^-1 SA added in). Furthermore, the in situ Raman spectra and DFT calculations confirmed that Ni^IIIOOH dominated the oxidation process and terminated it at the p-benzoquinone stage. These findings provide a feasible strategy to combine electrochemical antibiotic oxidation by Ni-based electrodes with hydrogen energy recovery.

Phytic acid controlled in situ synthesis of amorphous cobalt phosphate/carbon composite as anode materials with a high mass loading for symmetrical supercapacitor: amorphization of the electrode to boost the energy density

Transition metal phosphate (TMPi)-based composites as anode electrode materials in supercapacitor applications are less reported. Herein, we report a phytic acid (PA)-assisted in situ-formed amorphous cobalt phosphate/carbon (CoPi/C) composite grown on a flexible woven carbon cloth (CC) via a simple one-step carbonization approach. The tunable synthesis of amorphous and crystalline composites is shown by simply controlling the concentration of the cobalt salts. The strategy for high mass loading to 12 mg cm-2 is also shown in this report. Importantly, the resulting amorphous electrode materials exhibit electric double-layer capacitance (EDLC) behavior that works over a wide potential range from -1.4 to +0.5 V in an aqueous solution of potassium hydroxide (2 M KOH) and from -1.5 to +1.5 V in sodium sulfate (1 M Na2SO4). The amorphous electrode as an anode is capable of delivering an areal capacitance up to 2.15 F cm-2 at a current density of 4 mA cm-2 (gravimetric capacitance up to 606.1 F g-1 at 1 Ag-1) and has a retention of 94.2% at 10 000 cycles. The flexible solid-state symmetric device fabricated shows an energy density of approximately 620.0 μW h cm-2 at a power density of 4.7 mW cm-2 (31.1 W h kg-1 at 476.0 W kg-1). This study offers a novel route for the generation of metal phosphate-based anode materials with high capacitance for symmetrical supercapacitor device with high energy density.

Ni(HCO3)2 nanosheet/nickel tetraphosphate (Ni(P4O11)) nanowire composite as a high-performance electrode material for asymmetric supercapacitors

Nickel compounds, especially Ni(HCO3)2 (here denoted as NiC), have been widely combined with other materials to obtain composites with a more favorable structure that exhibit excellent electrochemical performance as supercapacitors. Unfortunately, the complicated processes for preparing such composites directly restrict their further application. Herein, we prepared a NiC/nickel tetraphosphate (Ni(P4O11)) nanocomposite (NiC/NiP) by introducing [Formula: see text] ions into the NiC reaction system; this composite can be applied in high-performance supercapacitors. The micromorphology of NiC/NiP material displayed an appropriate combination of NiP nanowires and thin NiC nanosheets, which provide sufficient active sites, short ion diffusion paths and fast ion diffusion speeds. NiC/NiP material exhibited an excellent rate performance of 70.2% retained capacity, although the current was increased by 15 times (1196 F g-1 at 2.0 A g-1 and 840 F g-1 at 30 A g-1). The energy density of a NiC/NiP//active carbon (AC) asymmetric supercapacitor fabricated in 6 M KOH was as much as 39.02 W h kg-1 and 26.67 W h kg-1 under corresponding power densities of 160 W kg-1 and 8000 W kg-1, respectively. The asymmetric supercapacitor delivered a stable cyclic performance of 78% capacitive retention after 5000 continuous charge/discharge cycles. More importantly, a 2.5 V light-emitting diode was lit successfully by two NiC/NiP//AC asymmetric supercapacitors in series. These results confirm that NiC/NiP nanocomposite has great potential in practical applications of electrochemical energy storage devices.

Conversion of biomass-derived levulinate esters to γ-valerolactone with a robust CuNi bimetallic catalyst

A high-performance Cu–Ni bimetallic catalyst supported on Zr–Al oxides was fabricated for catalyzing the transfer hydrogenation of levulinate esters to γ-valerolactone (GVL) under mild conditions.

Facile Dual-Ligand Modulation Tactic toward Nickel-Cobalt Sulfides/Phosphides/Selenides as Supercapacitor Electrodes with Long-Term Durability and Electrochemical Activity

The use of high electrochemical active binary nickel-cobalt sulfides/phosphides/selenides (Ni-Co-X, X = S, P, Se) as electrochemical energy storage materials still has a space for improvement because they become electrochemically unstable during long-term use. Herein, a facile and cost-effective dual-ligand synergistic modulation tactic is described to substantially improve the durability of Ni-Co-X (X = S, P, Se) at the atomic level by partially substituting S, P, and Se ligands into the nickel-cobalt hydroxide precursor, respectively. Remarkably, the dual-ligand electrodes on Ni-foam achieve superior durability and high electrochemical activity when used as positive electrodes in supercapacitors. Impressively, the density functional theory calculations demonstrate that the OH ligand in NiCo₂(MOH)_x (M = S, P, Se) could attract electrons from metal-S/metal-P/metal-Se bonds to the metal-O bond, enhancing the binding energy of metal-S/metal-P/metal-Se bonds and improving the long-term durability of Ni-Co-X (X = S, P, Se) in alkaline electrolytes. Moreover, OH and S/P/Se ligands could effectively alter the electron structure and result in favorable electrochemical activity. Overall, this tactic could offer an exciting avenue to achieve long-term durability and electrochemical activity of supercapacitor electrodes simultaneously.

Self-Assembled Nickel Pyrophosphate-Decorated Amorphous Bimetal Hydroxides 2D-on-2D Nanostructure for High-Energy Solid-State Asymmetric Supercapacitor

To obtain a supercapacitor with a remarkable specific capacitance and rate performance, a cogent design and synthesis of the electrode material containing abundant active sites is necessary. In present work, a scalable strategy is developed for preparing 2D-on-2D nanostructures for high-energy solid-state asymmetric supercapacitors (ASCs). The self-assembled vertically aligned microsheet-structured 2D nickel pyrophosphate (Ni₂ P₂ O₇ ) is decorated with amorphous bimetallic nickel cobalt hydroxide (NiCo-OH) to form a 2D-on-2D nanostructure arrays electrode. The resulting Ni₂ P₂ O₇ /NiCo-OH 2D-on-2D array electrode exhibits peak specific capacity of 281 mA hg^-1 (4.3 F cm^-2 ), excellent rate capacity, and cycling stability over 10 000 charge-discharge cycles in the positive potential range. The excellent electrochemical features can be attributed to the high electrical conductivity and 2D layered structure of Ni₂ P₂ O₇ along with the Faradic capacitance of the amorphous NiCo-OH nanosheets. The constructed Ni₂ P₂ O₇ /NiCo-OH//activated carbon based solid-state ASC cell operates in a high voltage window of 1.8 V with an energy density of 78 Wh kg^-1 (1.065 mWh cm^-3 ) and extraordinary cyclic stability over 10 000 charge-discharge cycles with excellent energy efficiency (75%-80%) over all current densities. The excellent electrochemical performance of the prepared electrode and solid-state ASC device offers a favorable and scalable pathway for developing advanced electrodes.

Highly Electroactive Ni Pyrophosphate/Pt Catalyst toward Hydrogen Evolution Reaction

Robust electrocatalysts toward the resourceful and sustainable generation of hydrogen by splitting of water via electrocatalytic hydrogen evolution reaction (HER) are a prerequisite to realize high-efficiency energy research. Highly electroactive catalysts for hydrogen production with ultralow loading of platinum (Pt) have been under exhaustive exploration to make them cutting-edge and cost-effectively reasonable for water splitting. Herein, we report the synthesis of hierarchically structured nickel pyrophosphate (β-Ni₂P₂O₇) by a precipitation method and nickel phosphate (Ni₃(PO₄)₂) by two different synthetic routes, namely, simple cost-effective precipitation and solution combustion processes. Thereafter, Pt-decorated nickel pyrophosphate and nickel phosphate (β-Ni₂P₂O₇/Pt and Ni₃(PO₄)₂/Pt) were prepared by using potassium hexachloroplatinate and ascorbic acid. The fabricated novel nickel pyrophosphate and nickel phosphate/Pt materials were utilized as potential and affordable electrocatalysts for HER by water splitting. The detailed electrochemical studies revealed that the β-Ni₂P₂O₇/Pt (1 μg·cm^-2 Pt) electrocatalyst showed excellent electrocatalytic performances for HER in acidic solution with an overpotential of 28 mV at -10 mA·cm^-2, a Tafel slope of 32 mV·dec, and an exchange current density ( j₀) of -1.31 mA·cm^-2, which were close to the values obtained using the Vulcan/Pt (8.0 μg·cm^-2 Pt), commercial benchmarking electrocatalyst with eight times higher Pt amount. Furthermore, the β-Ni₂P₂O₇/Pt electrocatalyst maintains an excellent stability for over -0.1 V versus RHE for 12 days, keeping j₀ equal after the stability test (-1.28 mA cm^-2). Very well-distributed Pt NPs inside the "cages" on the β-Ni₂P₂O₇ structure with a crystalline pattern of 0.67 nm distance to the Ni₂P₂O₇/Pt electrocatalyst, helping the Volmer-Tafel mechanism with the Tafel reaction as a major rate-limiting step, help to liberate very fast the Pt sites after HER. The high electrocatalytic performance and remarkable durability showed the β-Ni₂P₂O₇/Pt material to be a promising cost-effective electrocatalyst for hydrogen production.

Fabrication of g-C3N4 Nanomesh-Anchored Amorphous NiCoP2O7: Tuned Cycling Life and the Dynamic Behavior of a Hybrid Capacitor

Developing a novel electrode material with better electrochemical behavior and extended cyclability is a major issue in the field of hybrid capacitors. In this work, we propose a novel strategy for the facile synthesis of nickel-cobalt pyrophosphate nanoparticles anchored on graphitic carbon nitride (NiCoP₂O₇/g-C₃N₄) via the simple solvothermal method. Field emission scanning electron microscopy and transmission electron microscopy analysis revealed the uniform anchoring of NiCoP₂O₇ nanocomposite on g-C₃N₄ nanosheets. Benefitting from the effect of amorphous nature and a conductive matrix of the NiCoP₂O₇/g-C₃N₄ (NP3) composite, the material achieves a specific capacitance of 342 F g^-1 at a scan rate of 5 mV s^-1. Impressively, the electrode shows long-term cycling stability with 100% capacitance retention over 5000 cycles. Employing activated carbon as an anode and as-prepared NP3 as a cathode, the assembled asymmetric hybrid cell exhibits high-energy density and exceptional cyclability (specific capacitance retention over 10 000 cycles). The outstanding electrochemical and cyclic stability is attributed to the shortest electron-ion pathway with effective interfacial interaction. The low electronic resistance of the NiCoP₂O₇/g-C₃N₄ nanocomposite is revealed by varying the bias voltage variation in the electrochemical impedance spectroscopy. Our results promise better utilization of the bimetallic pyrophosphate-anchored g-C₃N₄ matrix as a potential electrode for high-performance energy storage devices.

Serpentine Ni3 Ge2 O5 (OH)4 Nanosheets with Tailored Layers and Size for Efficient Oxygen Evolution Reactions

Layered serpentine Ni₃ Ge₂ O₅ (OH)₄ is compositionally active and structurally favorable for adsorption and diffusion of reactants in oxygen evolution reactions (OER). However, one of the major problems for these materials is limited active sites and low efficiency for OER. In this regard, a new catalyst consisting of layered serpentine Ni₃ Ge₂ O₅ (OH)₄ nanosheets is introduced via a controlled one-step synthetic process where the morphology, size, and layers are well tailored. The theoretical calculations indicate that decreased layers and increased exposure of (100) facets in serpentine Ni₃ Ge₂ O₅ (OH)₄ lead to much lower Gibbs free energy in adsorption of reactive intermediates. Experimentally, it is found that the reduction in number of layers with minimized particle size exhibits plenty of highly surface-active sites of (100) facets and demonstrates a much enhanced performance in OER than the corresponding multilayered nanosheets. Such a strategy of tailoring active sites of serpentine Ni₃ Ge₂ O₅ (OH)₄ nanosheets offers an effective method to design highly efficient electrocatalysts.

Engineering Morphologies of Cobalt Pyrophosphates Nanostructures toward Greatly Enhanced Electrocatalytic Performance of Oxygen Evolution Reaction

Herein, a surfactant- and additive-free strategy is developed for morphology-controllable synthesis of cobalt pyrophosphate (CoPPi) nanostructures by tuning the concentration and ratio of the precursor solutions of Na4 P2 O7 and Co(CH3 COO)2 . A series of CoPPi nanostructures including nanowires, nanobelts, nanoleaves, and nanorhombuses are prepared and exhibit very promising electrocatalytic properties toward the oxygen evolution reaction (OER). Acting as both reactant and pseudo-surfactant, the existence of excess Na4 P2 O7 is essential to synthesize CoPPi nanostructures for unique morphologies. Among all CoPPi nanostructures, the CoPPi nanowires catalyst renders the best catalytic performance for OER in alkaline media, achieving a low Tafel slope of 54.1 mV dec-1 , a small overpotential of 359 mV at 10 mA cm-2 , and superior stability. The electrocatalytic activities of CoPPi nanowires outperform the most reported non-noble metal based catalysts, even better than the benchmark Ir/C (20%) catalyst. The reported synthesis of CoPPi gives guidance for morphology control of transition metal pyrophosphate based nanostructures for a high-performance inexpensive material to replace the noble metal-based OER catalysts.

Redox Additive-Improved Electrochemically and Structurally Robust Binder-Free Nickel Pyrophosphate Nanorods as Superior Cathode for Hybrid Supercapacitors

For several decades, one of the great challenges for constructing a high-energy supercapacitor has been designing electrode materials with high performance. Herein, we report for the first time to our knowledge a novel hybrid supercapacitor composed of battery-type nickel pyrophosphate one-dimensional (1D) nanorods and capacitive-type N-doped reduced graphene oxide as the cathode and anode, respectively, in an aqueous redox-added electrolyte. More importantly, ex situ microscopic images of the nickel pyrophosphate 1D nanorods revealed that the presence of the battery-type redox additive enhanced the charge storage capacity and cycling life as a result of the microstructure stability. The nickel pyrophosphate 1D nanorods exhibited their maximum specific capacitance (8120 mF cm^-2 at 5 mV s^-1) and energy density (0.22 mWh cm^-2 at a power density of 1.375 mW cm^-2) in 1 M KOH + 75 mg K₃[Fe(CN)₆] electrolyte. On the other side, the N-doped reduced graphene oxide delivered an excellent electrochemical performance, demonstrating that it was an appropriate anode. A hybrid supercapacitor showed a high specific capacitance (224 F g^-1 at a current density of 1 A g^-1) and high energy density (70 Wh kg^-1 at a power density of 750 W kg^-1), as well as a long cycle life (a Coulombic efficiency of 96% over 5000 cycles), which was a higher performance than most of those in recent reports. Our results suggested that the materials and redox additive in this novel design hold great promise for potential applications in a next-generation hybrid supercapacitor.

Controllable Fabrication and Tuned Electrochemical Performance of Potassium Co-Ni Phosphate Microplates as Electrodes in Supercapacitors

Most reported pristine phosphates, such as NH₄MPO₄·H₂O (M = Co, Ni), are not very stable as supercapacitor electrodes because of their chemical properties. In this work, KCo_xNi_1-xPO₄·H₂O microplates were fabricated by a facile hydrothermal method at low temperature and used as electrodes in supercapacitors. The Co and Ni content could be adjusted, and optimal electrochemical performance was found in KCo_0.33Ni_0.67PO₄·H₂O, which also possessed superior specific capacitance, rate performance, and long-term chemical stability compared with NH₄Co_0.33Ni_0.67PO₄·H₂O because of its unique chemical composition and microstructure. Asymmetric supercapacitor cells based on KCo_0.33Ni_0.67PO₄·H₂O and active carbon were assembled, which produce specific capacitance of 34.7 mA h g^-1 (227 F g^-1) under current density of 1.5 A g^-1 and retain 82% as initial specific capacitance after charging and discharging approximately 5000 times. The assembled asymmetric supercapacitor cells (ASCs) exhibited much higher power and energy density than most previously reported transition metal phosphate ASCs. The KCo_xNi_1-xPO₄·H₂O electrodes fabricated in this work are efficient, inexpensive, and composed of naturally abundant materials, rendering them promising for energy storage device applications.

Metal (M = Co, Ni) phosphate based materials for high-performance supercapacitors

With the ever increasing demand for clean, sustainable energy, electrochemical supercapacitors with the advantages of high power density, high efficiency and long life expectancy have become one of the major devices for energy storage and power supply, and have found wide application in hybrid power sources, backup power sources, starting power for fuel cells and burst-power generation in electronic devices.

Morphological evolution of Co phosphate and its electrochemical and photocatalytic performance

Cobalt phosphates with different compositions and morphologies were prepared via a one-step hydrothermal method.

Metal Phosphides and Phosphates-based Electrodes for Electrochemical Supercapacitors

Phosphorus compounds, such as metal phosphides and phosphates have shown excellent performances and great potential in electrochemical energy storage, which are demonstrated by research works published in recent years. Some of these metal phosphides and phosphates and their hybrids compare favorably with transition metal oxides/hydroxides, which have been studied extensively as a class of electrode materials for supercapacitor applications, where they have limitations in terms of electrical and ion conductivity and device stability. To be specific, metal phosphides have both metalloid characteristics and good electric conductivity. For metal phosphates, the open-framework structures with large channels and cavities endow them with good ion conductivity and charge storage capacity. In this review, we present the recent progress on metal phosphides and phosphates, by focusing on their advantages/disadvantages and potential applications as a new class of electrode materials in supercapacitors. The synthesis methods to prepare these metal phosphides/phosphates are looked into, together with the scientific insights involved, as they strongly affect the electrochemical energy storage performance. Particular attentions are paid to those hybrid-type materials, where strong synergistic effects exist. In the summary, the future perspectives and challenges for the metal phosphides, phosphates and hybrid-types are proposed and discussed.

Direct aqueous solution synthesis of an ultra-fine amorphous nickel–boron alloy with superior pseudocapacitive performance for advanced asymmetric supercapacitors

This study reports a facile aqueous solution synthesis of an ultrafine amorphous nickel–boron alloy and its applications as a novel positive electrode material for asymmetric supercapacitors.