Gel Polymer Electrolytes Containing Anion-Trapping Boron Moieties for Lithium-Ion Battery Applications

Anion-Immobilized Gel Polymer Electrolyte with a High Ion Transference Number for High-Performance Lithium/Sodium Metal Batteries

Due to their high energy density, lithium/sodium metal batteries (LMBs/SMBs) are expected to be the next generation of energy storage systems. However, the further application of alkali metal batteries based on liquid electrolytes is limited due to increasing safety concerns. Gel polymer electrolytes (GPEs), which combine the advantages of the high ionic conductivity of liquid electrolytes and excellent mechanical properties of solid polymer electrolytes, are considered to play an irreplaceable role in the realization of high-performance alkali metal batteries. In this work, a flexible boron-containing GPE (B-GPE) with a cross-linked polymer network structure is prepared by a UV-induced process. The as-prepared B-GPE exhibits good ionic conductivity and has an extremely high ion transference number due to the electron-withdrawing effect of the boron moiety and the facile electrolyte uptake ability of the ethylene oxide chain. Furthermore, a "gentle" electrode/electrolyte contact is designed by a one-step in situ polymerization method, which can enhance ion transport within the electrode and at the electrode/electrolyte interface due to the presence of a continuous polymer phase for ion conduction. Therefore, LMBs and SMBs containing B-GPE are able to effectively inhibit the growth of dendrites while exhibiting excellent cycling stability. These comprehensive results indicate that this novel B-GPE possesses potential applications for high-performance alkali metal batteries.

Cross-Linking of Sugar-Derived Polyethers and Boronic Acids for Renewable, Self-Healing, and Single-Ion Conducting Organogel Polymer Electrolytes

This report describes the synthesis and characterization of organogels by reaction of a diol-containing polyether, derived from the sugar d-xylose, with 1,4-phenylenediboronic acid (PDBA). The cross-linked materials were analyzed by infrared spectroscopy (FT-IR), thermal gravimetric analysis (TGA), scanning electron microscopy (FE-SEM), and rheology. The rheological material properties could be tuned: gel or viscoelastic behavior depended on the concentration of polymer, and mechanical stiffness increased with the amount of PDBA cross-linker. Organogels demonstrated self-healing capabilities and recovered their storage and loss moduli instantaneously after application and subsequent strain release. Lithiated organogels were synthesized through incorporation of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) into the cross-linked matrix. These lithium-borate polymer gels showed a high ionic conductivity value of up to 3.71 × 10^-3 S cm^-1 at 25 °C, high lithium transference numbers (t ₊ = 0.88-0.92), and electrochemical stability (4.51 V). The gels were compatible with lithium-metal electrodes, showing stable polarization profiles in plating/stripping tests. This system provides a promising platform for the production of self-healing gel polymer electrolytes (GPEs) derived from renewable feedstocks for battery applications.

Opportunities of Flexible and Portable Electrochemical Devices for Energy Storage: Expanding the Spotlight onto Semi-solid/Solid Electrolytes

The ever-increasing demand for flexible and portable electronics has stimulated research and development in building advanced electrochemical energy devices which are lightweight, ultrathin, small in size, bendable, foldable, knittable, wearable, and/or stretchable. In such flexible and portable devices, semi-solid/solid electrolytes besides anodes and cathodes are the necessary components determining the energy/power performances. By serving as the ion transport channels, such semi-solid/solid electrolytes may be beneficial to resolving the issues of leakage, electrode corrosion, and metal electrode dendrite growth. In this paper, the fundamentals of semi-solid/solid electrolytes (e.g., chemical composition, ionic conductivity, electrochemical window, mechanical strength, thermal stability, and other attractive features), the electrode-electrolyte interfacial properties, and their relationships with the performance of various energy devices (e.g., supercapacitors, secondary ion batteries, metal-sulfur batteries, and metal-air batteries) are comprehensively reviewed in terms of materials synthesis and/or characterization, functional mechanisms, and device assembling for performance validation. The most recent advancements in improving the performance of electrochemical energy devices are summarized with focuses on analyzing the existing technical challenges (e.g., solid electrolyte interphase formation, metal electrode dendrite growth, polysulfide shuttle issue, electrolyte instability in half-open battery structure) and the strategies for overcoming these challenges through modification of semi-solid/solid electrolyte materials. Several possible directions for future research and development are proposed for going beyond existing technological bottlenecks and achieving desirable flexible and portable electrochemical energy devices to fulfill their practical applications. It is expected that this review may provide the readers with a comprehensive cross-technology understanding of the semi-solid/solid electrolytes for facilitating their current and future researches on the flexible and portable electrochemical energy devices.

Regulating Na Electrodeposition by Sodiophilic Grafting onto Porosity-Gradient Gel Polymer Electrolytes for Dendrite-Free Sodium Metal Batteries

Sodium metal batteries have been emerging as promising candidates for post-Li battery systems owing to the natural abundance, low costs, and high energy density of Na metal. However, exploiting an Na metal anode is accompanied by uncontrolled Na electrodeposition, particularly concerning dendrite growth, hampering practical Na metal battery applications. Herein, we propose sodiophilic gel polymer electrolytes with a porosity-gradient Janus structure to alleviate Na dendrite growth. Tethering only 1.1 mol % sodiophilic poly(ethylene glycol) to poly(vinylidene fluoride-co-hexafluoropropylene) suppresses Na dendrites by regulating homogeneous Na⁺ distribution, which relies on molecular-level coordination between Na⁺ and the sodiophilic functional groups. By exploiting the porosity-gradient Janus structure, we have demonstrated that regular porosity and well-defined morphology of polymer electrolytes, particularly at the Na/electrolyte interface, significantly impact dendrite growth. This study provides new insights into the rational design of Na dendrite-suppressing polymer electrolytes, primarily focusing on the ion-regulating ability achieved by surface engineering.

Direct Ink Printing of PVdF Composite Polymer Electrolytes with Aligned BN Nanosheets for Lithium-Metal Batteries

The use of polymer electrolytes is of great interest for lithium-metal batteries (LMBs) due to their stability with lithium metal. However, the low thermal conductivity of polymer electrolytes poses a significant barrier to minimizing the formation of local hot spots during electrochemical reactions in lithium batteries that may lead to dendritic plating of Li or thermal runaway events. Electrolyte nanocomposites with proper distribution of thermally conductive nanomaterials offer an opportunity to address this shortcoming. Utilizing a custom-designed direct ink writing (DIW) process, we show that highly aligned boron nitride (BN) nanosheets can be embedded in poly(vinylidene fluoride-hexafluoropropylene) (PVdF) polymer composite electrolytes (CPE-BN), enabling novel architectural designs for safe Li-metal batteries. It is observed that the CPE-BN electrolytes possess a 400% increase in their in-plane thermal conductivity, which enables faster heat distribution in the CPE-BN electrolyte compared to the polymer electrolytes without BN nanosheets. The CPE-BN containing symmetric lithium cell exhibits stable Li plating/stripping for over 2000 cycles without short-circuiting due to the suppression of dendritic lithium. The lithium-ion half-cells made with the CPE-BN show stable cycling performance at 1C charge-discharge rate for 250 cycles with 90% capacity retention. This reported DIW-printed PVdF composite polymer electrolyte could be used as a model for developing new architectures for other electrolytes or electrodes, thus enabling new chemistry and improved performances in energy-storage devices.

Solid-State Lithium Metal Battery of Low Capacity Fade Enabled by a Composite Electrolyte with Sulfur-Containing Oligomers

A solid-state lithium metal battery of low capacity fade is acquired using the electrolyte membrane of a polyurethane-acrylate-thiocarbonate (PUAT) oligomer, macromolecules, lithium salt, and an oxide additive. Two types of composite electrolytes have been prepared: the free-standing electrolyte (PUAT-FS) and the electrode-coated electrolyte (PUAT-EC). Featuring a less PUAT content and a finer granular size, PUAT-FS is less ion-conductive than PUAT-EC; 0.44 mS cm^-1 in contrast to 0.51 mS cm^-1 at room temperature. Nonetheless, the lithium iron phosphate battery of PUAT-FS is far superior to that of PUAT-EC in terms of cycling stability. When cycled at 0.1C and room temperature, the PUAT-FS battery reaches a maximum discharge capacity of 169.7 mAh g^-1 at its 20th cycle and decreases to 141.0 mAh g^-1 at the 500th cycle, 83.1% retention. The capacity fading rate of the PUAT-FS battery is 0.034% per cycle at 0.1C, significantly less than that of the PUAT-EC battery, 0.138% per cycle. Other maximum capacities and fading rates of the PUAT-FS battery are 152.5 mAh g^-1 and 0.050% per cycle at 0.2C in 800 cycles and 126.1 mAh g^-1 and 0.051% per cycle at 0.5C in 1000 cycles. These features of a low fading rate and high capacity are attributed to a balanced ratio of oligomer to macromolecule (1:1 w/w) in the free-standing electrolyte and the sulfur-containing oligomer.

Construction of coral-like architectures of boron-containing compounds: Coral-like boric acid and its application performances

Boric acid molecules could easily self-aggregate into hierarchically porous coral-like architectures while the lower alcohols were taken as modifier in aqueous solution. Such a structure feature of boric acid manifests...

In Situ Gel Polymer Electrolyte with Inhibited Lithium Dendrite Growth and Enhanced Interfacial Stability for Lithium-Metal Batteries

The practical application of lithium-metal anodes in high-energy-density rechargeable lithium batteries is hindered by the uncontrolled growth of lithium dendrites and limited cycle life. An ether-based gel polymer electrolyte (GPE-H) is developed through in situ polymerization method, which has close contact with the electrode interface. Based on DFT calculations, it was confirmed that the cationic groups produced by polar solvent tris(1,1,1,3,3,3-hexafluoroisopropyl) (HFiP) initiate the ring-opening polymerization of DOL in the battery. As a result, GPE-H achieves considerable ionic conductivity (1.6 × 10^-3 S cm^-1) at ambient temperature, high lithium-ion transference number (t_Li⁺ > 0.6) and an electrochemical stability window as high as 4.5 V. GPE-H can achieve up to 800 h uniform lithium plating/stripping at a current density of 1.65 mA cm^-2 in Li symmetrical batteries. Li-S and LiFePO₄ batteries using this GPE-H have long cycle performances at ambient temperature and high Coulomb efficiency (CE > 99.2%). From the above, in situ polymerized GPE-H electrolytes are promising candidates for high-energy-density rechargeable lithium batteries.

Facile Fabrication of Functionalized Separators for Lithium-Ion Batteries with Ionic Conduction Path Modifications via the γ-Ray Co-irradiation Grafting Process

Separators play a vital role in electronic insulation and ionic conduction in lithium-ion batteries. The common improvement strategy of polyolefin separators is mostly based on modifications with a coating layer, which is simple and effective to some extent. However, the improvement is often accompanied by negative effects such as the increase of the thickness and the blockage of the porous structure, resulting in the decrease of energy density and power density. The porous structure of the separators serves as a conduction path for ions to travel back and forth between the anode and cathode, which has an important impact on the performance of lithium-ion batteries. If the porous structure of the separators can be modified, it will essentially affect the ionic transport behavior through the whole conduction path. Herein, we provide a simple and effective method to functionalize the porous polyolefin separator via the γ-ray co-irradiation grafting process, where high-energy γ-ray is used to generate active sites on the polymer chain to initiate the grafting polymerization of chosen monomers with selected functional groups. In this work, 4,4,5,5-tetramethyl-2-vinyl-1,3,2-dioxaborolane, a kind of borane molecule with an electron-deficient group, was chosen as the grafting monomer. After the γ-ray co-irradiation grafting process, both the surface and pores of the polyolefin separators were functionalized by electron-deficient groups in the borane molecule and the whole electrolyte conduction path within the separator was activated. Due to the electron-deficient effect of the B atom, the lithium-ion conduction is promoted and the lithium-ion transference number can be increased to 0.5. As a result, the half-cell assembled with the functionalized separator shows better cycle stability and better capacity retention under high current rate.

Nonporous Gel Electrolytes Enable Long Cycling at High Current Density for Lithium-Metal Anodes

Lithium-metal anodes with high theoretical capacity and ultralow redox potential are regarded as a "holy grail" of the next-generation energy-storage industry. Nevertheless, Li inevitably reacts with conventional liquid electrolytes, resulting in uneven electrodeposition, unstable solid electrolyte interphase, and Li dendrite formation that all together lead to a decrease in active lithium, poor battery performance, and catastrophic safety hazards. Here, we report a unique nonporous gel polymer electrolyte (NP-GPE) with a uniform and dense structure, exhibiting an excellent combination of mechanical strength, thermal stability, and high ionic conductivity. The nonporous structure contributed to a uniform distribution of lithium ions for dendrite-free lithium deposition, and Li/NP-GPE/Li symmetric cells can maintain an extremely low and stable polarization after cycling at a high current density of 10 mA cm^-2. This work provides an insight that the NP-GPE can be considered as a candidate for practical applications for lithium-metal anodes.

A flexible Cellulose/Methylcellulose gel polymer electrolyte endowing superior Li+ conducting property for lithium ion battery

With the advent of gel polymer electrolyte (GPE), a series of safety problems of lithium ion batteries have been resolved. However, poor self-standing property, the low ionic conductivity and Li⁺ transference number are still the obstacles that impede the practical application of GPE. Herein, a flexible and eco-friendly GPE is designed using allyl-modified cellulose with methylcellulose through simple UV curing. The crosslinked structure facilitates the integrity of GPE during use, and methylcellulose guarantees the high affinity to liquid electrolyte and improve interfacial compatibility. The specific polar functional groups (OH, OCH₃ and COC) in GPE cooperate to enhance the lithium salt dissociation, anion immobilization and lithium ion transporting and enable the high Li⁺ transference number (0.902) and ion conductivity (4.36 × 10^-3 S cm^-1). The assembled Li/GPE/LiFePO₄ coin cells possess high initial discharge capacity of 150.6 mA h g^-1 and a high capacity retention of 91.6 % after 100 cycles.

Sustainable Lignin-Derived Cross-Linked Graft Polymers as Electrolyte and Binder Materials for Lithium Metal Batteries

This study concerns the development of a well-defined synthetic route to obtain lignin-derived multifunctional graft polymers by simple chemical modification and atom-transfer radical polymerization. By grafting ion-conducting and cross-linkable moieties onto the lignin, star-shaped functional polymers are prepared. Upon cross-linking under ultraviolet light irradiation, the resulting polymer network exhibits mechanical stability even at high temperature, whereas the chain mobility is maintained despite the cross-linked structure. Their use as solid polymer electrolytes (SPEs) and binders for all-solid-state lithium metal batteries (LMBs) is also evaluated. The lignin-derived graft polymers provide a facile ion conduction pathway and also efficiently suppress lithium dendrite growth during cycling, thereby attaining excellent cycling performance for the LMB cell compared to that with a conventional liquid electrolyte-Celgard system.

Two-Dimensional Materials to Address the Lithium Battery Challenges

Despite the ever-growing demand in safe and high power/energy density of Li⁺ ion and Li metal rechargeable batteries (LIBs), materials-related challenges are responsible for the majority of performance degradation in such batteries. These challenges include electrochemically induced phase transformations, repeated volume expansion and stress concentrations at interfaces, poor electrical and mechanical properties, low ionic conductivity, dendritic growth of Li, oxygen release and transition metal dissolution of cathodes, polysulfide shuttling in Li-sulfur batteries, and poor reversibility of lithium peroxide/superoxide products in Li-O₂ batteries. Owing to compelling physicochemical and structural properties, in recent years two-dimensional (2D) materials have emerged as promising candidates to address the challenges in LIBs. This Review highlights the cutting-edge advances of LIBs by using 2D materials as cathodes, anodes, separators, catalysts, current collectors, and electrolytes. It is shown that 2D materials can protect the electrode materials from pulverization, improve the synergy of Li⁺ ion deposition, facilitate Li⁺ ion flux through electrolyte and electrode/electrolyte interfaces, enhance thermal stability, block the lithium polysulfide species, and facilitate the formation/decomposition of Li-O₂ discharge products. This work facilitates the design of safe Li batteries with high energy and power density by using 2D materials.

Single Lithium-Ion Conducting Solid Polymer Electrolyte with Superior Electrochemical Stability and Interfacial Compatibility for Solid-State Lithium Metal Batteries

Lithium metal batteries are being explored in meeting ever-increasing energy density needs. Because of serious dendritic lithium issues in liquid-state electrolytes, it is generally thought that solid-state electrolytes are potential alternatives for lithium metal batteries. Herein, we design a new single lithium-ion conducting lithium poly[(cyano)(4-styrenesulfonyl)imide] (LiPCSI) to replace the conventional dual-ion conducting salt for use in solid polymer electrolytes (SPEs) that successfully suppress the growth of lithium dendrites. Owing to highly delocalized anion moiety and oxidation-resistant cyano group, the tailored PEO₈-LiPCSI SPE exhibits extremely high Li⁺ transference number (0.84) as well as oxidation potential (5.53 V vs Li⁺/Li). The symmetric Li/PEO₈-LiPCSI/Li cell runs for 1000 h at 60 °C without a short circuit. The rechargeable solid-state Li/PEO₈-LiPCSI/LiFePO₄ cell discharges a capacity of 141 mAh g^-1 with retention over 85% during 80 cycles. These merits enable the proposed PEO₈-LiPCSI SPE to be very promising for solid-state lithium metal battery applications.

Gel Polymer Electrolyte with High Li+ Transference Number Enhancing the Cycling Stability of Lithium Anodes

Lithium anodes suffer from severe safety problems in liquid electrolyte systems that result from an unstable Li plating/stripping process and Li dendrite growth, leading to rapid degradation of Li metal batteries. A polyethylene (PE)-supported gel polymer electrolyte (GPE) with excellent electrolyte uptake/retention capability was simply prepared in this paper by the construction of cross-linked polymer networks (PNs) on the surface of a poly(ethylenimine)-primed PE separator to stabilize the lithium anode. The highly delocalized negative charge of p-styrene sulfonate groups on PNs plays a role in regulating the Li⁺ and anion transport, giving rise to a high Li⁺ transference number. This GPE extended the electrochemical stability to 4.8 V and improved the stability of interface between the electrolyte and lithium metal anode (reduced overpotential and suppressed lithium dendrites) during storage and repeated lithium plating/stripping cycling. The Li metal anode-based battery employing this GPE exhibits excellent cycling stability and C-rate capability.

In Situ Cross-Linked Gel Polymer Electrolyte Membranes with Excellent Thermal Stability for Lithium Ion Batteries

Novel gel polymer electrolyte membranes with excellent thermal stability are fabricated via a combination of physical blending and chemical cross-linking procedures. Precursor porous membranes made of poly(vinylidene fluoride) (PVDF) and polystyrene-poly(ethylene oxide)-polystyrene (PS-PEO-PS) triblock copolymer composites are prepared by a phase-inversion technique, and the gel polymer electrolyte membranes are finished by in situ hypercrosslinking of the PS segments in precursor membranes. The latter cross-linking procedure could consolidate pore configuration and thus greatly enhance the thermal stability of the obtained cross-linked composite membranes. The membranes with optimal PS/PEO ratios can retain reasonable porosity with little dimensional shrinkage at high temperatures up to 260 °C. Gel polymer electrolytes with these cross-linked membranes as matrices exhibit much higher ionic conductivities (up to 1.38 × 10^-3 S cm^-1 at room temperature) than those based on pure PVDF membranes. Li/LiFePO₄ half cells assembled with these gel polymer electrolytes exhibit good cycling performance and rate capability. These results indicate that the Friedel-Crafts reaction based hypercrosslinking is an efficient method to construct highly heat-resistant polymer electrolytes for lithium ion batteries, particularly advantageous in applications that require high-temperature usage.

High-Performance Ionic Liquid-Based Gel Polymer Electrolyte Incorporating Anion-Trapping Boron Sites for All-Solid-State Supercapacitor Application

A high-performance boron-containing gel polymer electrolyte (GPE) with semi-interpenetrating polymer network structure was successfully prepared by a rapid and easy one-step polymerization process assisted with UV light, exploiting poly(ethylene oxide) as a polymer host, the novel borate ester monomer as the cross-linker, and LiClO₄ and EMIMBF₄ both as the plasticizer and electrolytic salt, respectively. Owing to the incorporation of anion-trapping boron sites, the ionic conductivity of the as-prepared GPE at room temperature can be up to 5.13 mS cm^-1. In addition, the boron-containing GPE (B-GPE) exhibits favorable mechanical strength, excellent thermal stability, and extremely low flammability. Moreover, the all-solid-state symmetric supercapacitor using B-GPE as the electrolyte and reduced graphene oxide as the electrode was fabricated and exhibited a broad potential window (3.2 V). The all-solid-state symmetric supercapacitor based on B-GPE can still reach a high energy density of 27.62 W h kg^-1 with a power density of 6.91 kW kg^-1 at a high current density of 5 A g^-1. After 5000 cycles at a current density of 1 A g^-1, the all-solid-state supercapacitor with B-GPE displays a decent capacitance retention of 91.2%.

Electrochemical Characterization of Single Lithium-Ion Conducting Polymer Electrolytes Based on sp3 Boron and Poly(ethylene glycol) Bridges

A novel series of single lithium-ion conducting polymer electrolytes (SLICPE) based on sp³ boron and poly(ethylene glycol) (PEG) bridges is presented, in the context of the development of a new generation of batteries, with the aim to overcome the problems related to concentration overpotential and low ion transport numbers in conventional solid polymer electrolytes (SPE). The phase separation generated by the physical mixture of SPE with plasticizers such as poly(ethylene oxide) is still a serious problem. In this work, the use of PEG with different chain lengths, for the polycondensation reaction with LiB(OCH₃)₄, to synthesize SLICPE allows preventing phase separation while tuning the predominant conduction mechanism, and thus the electrical properties, especially the lithium-ion transference number. The ionic transport is promoted by chain mobility as the chain length is increased. SLICPE with the best ionic conductivity values (4.95 ± 0.05) × 10^-6 S cm^-1 was the one synthesized from poly(ethylene glycol) with an average M_N of 400 (BEG8), having an O/Li⁺ ratio of 20. The lithium transference number ( t_Li⁺) and electrochemical stability window of SLICPE membranes at 25 °C decreased as the PEG bridge length between sp³ boron atoms increased from 0.97 to 0.88 and 5.4 to 4.2 V vs Li⁰/Li⁺, respectively, for SLICPE synthesized from PEG with an average M_N of 50-400 (BEG1 to BEG8).

Recent Advances in Poly(vinylidene fluoride) and Its Copolymers for Lithium-Ion Battery Separators

The separator membrane is an essential component of lithium-ion batteries, separating the anode and cathode, and controlling the number and mobility of the lithium ions. Among the polymer matrices most commonly investigated for battery separators are poly(vinylidene fluoride) (PVDF) and its copolymers poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE), poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), and poly(vinylidene fluoride-cochlorotrifluoroethylene) (PVDF-CTFE), due to their excellent properties such as high polarity and the possibility of controlling the porosity of the materials through binary and ternary polymer/solvent systems, among others. This review presents the recent advances on battery separators based on PVDF and its copolymers for lithium-ion batteries. It is divided into the following sections: single polymer and co-polymers, surface modification, composites, and polymer blends. Further, a critical comparison between those membranes and other separator membranes is presented, as well as the future trends on this area.

Flexible, High-Wettability and Fire-Resistant Separators Based on Hydroxyapatite Nanowires for Advanced Lithium-Ion Batteries

Separators play a pivotal role in the electrochemical performance and safety of lithium-ion batteries (LIBs). The commercial microporous polyolefin-based separators often suffer from inferior electrolyte wettability, low thermal stability, and severe safety concerns. Herein, a novel kind of highly flexible and porous separator based on hydroxyapatite nanowires (HAP NWs) with excellent thermal stability, fire resistance, and superior electrolyte wettability is reported. A hierarchical cross-linked network structure forms between HAP NWs and cellulose fibers (CFs) via hybridization, which endows the separator with high flexibility and robust mechanical strength. The high thermal stability of HAP NW networks enables the separator to preserve its structural integrity at temperatures as high as 700 °C, and the fire-resistant property of HAP NWs ensures high safety of the battery. In particular, benefiting from its unique composition and highly porous structure, the as-prepared HAP/CF separator exhibits near zero contact angle with the liquid electrolyte and high electrolyte uptake of 253%, indicating superior electrolyte wettability compared with the commercial polyolefin separator. The as-prepared HAP/CF separator has unique advantages of superior electrolyte wettability, mechanical robustness, high thermal stability, and fire resistance, thus, is promising as a new kind of separator for advanced LIBs with enhanced performance and high safety.

Thiol-ene synthesis and characterization of lithium bis(malonato)borate single-ion conducting gel polymer electrolytes

The development of high capacity anodes and high voltage cathodes for advanced lithium-ion batteries motivates the search for new polymer electrolytes that exhibit superior electrochemical stabilities and high ionic conductivities. We report a convenient, three-step synthesis of lithium bis(non-8-enyl-malonato)borate (LiBNMB) as a α,ω-diene monomer, which undergoes thermally initiated thiol-ene crosslinking polymerizations in propylene carbonate to yield gel polymer electrolytes with high lithium ion concentrations (∼0.9 M). By conducting these crosslinking polymerizations using mixtures of di- and tri-thiols and LiBNMB with [thiol] : [ene] = 1 : 1, we synthesized a series of gel networks with dynamic elastic moduli ranging from G' = 40-79 kPa that increase monotonically with trifunctional crosslinker content. While ionic conductivities for these polymer gels measured by electrochemical impedance spectroscopy at 22 °C are σ = 0.82-2.5 × 10^-6 S cm^-1, we show that the conductivity of propylene carbonate-solvated lithium ions though the bulk of these gel electrolytes is 8.5 × 10^-5 S cm^-1 independent of crosslinker density. However, the conductivities of the gel interfaces depend sensitively on crosslinker content, suggesting the importance of segmental rearrangement dynamics at the electrode interface in limiting the rate of ion motion. Thus, the design of highly conductive polymer electrolytes for advanced batteries demands careful design of both the internal and interfacial properties of these new materials.

Composite Gel Polymer Electrolyte for Improved Cyclability in Lithium-Oxygen Batteries

Gel polymer electrolytes (GPE) and composite GPE (cGPE) using one-dimensional glass microfillers have been developed for their use in lithium-oxygen batteries. Using glass microfillers, tetraglyme solvent, UV-curable polymer, and lithium salt at various concentrations, the preparation of cGPE yielded free-standing films. These cGPEs, with 1 wt % of microfillers, demonstrated increased ionic conductivity and lithium transference number over GPEs at various concentrations of lithium salt. Improvements as high as 50% and 28% in lithium transference number were observed for 0.1 and 1.0 mol kg^-1 salt concentrations, respectively. Lithium-oxygen batteries containing cGPE similarly showed superior charge/discharge cycling for 500 mAh g^-1 cycle capacity with as high as 86% and 400% increase in cycles for cGPE with 1.0 and 0.1 mol kg^-1 over GPE. Results using electrochemical impedance spectroscopy, Raman spectroscopy, and scanning electron microscopy revealed that the source of the improvement was the reduction of the rate of lithium carbonates formation on the surface of the cathode. This reduction in formation rate afforded by cGPE-containing batteries was possible due to the reduction of the rate of electrolyte decomposition. The increase in solvated to paired Li⁺ ratio at the cathode, afforded by increased lithium transference number, helped reduce the probability of superoxide radicals reacting with the tetraglyme solvent. This stabilization during cycling helped prolong the cycling life of the batteries.