Poly(ethylene glycol)-Based Hyperbranched Polymer from RAFT and Its Application as a Silver-Sulfadiazine-Loaded Antibacterial Hydrogel in Wound Care

Multifunctional Cu2Se/F127 Hydrogel with SOD-Like Enzyme Activity for Efficient Wound Healing

Free radicals are secreted following skin damage and cause oxidative stress and inflammatory reactions that increase the difficulty of wound healing. In this study, copper-based nanozyme Cu2Se nanosheets (NSs) are synthesized by an anion-exchange strategy and apply to wounds with F127 hydrogels to investigate the healing effect of this nanozyme composite hydrogels on wounds. Cu2Se NSs have a large number of catalytically active centers, are simple to synthesize, require few reaction conditions and have a short synthesis cycle. In vitro experiments have shown that Cu2Se NSs possess superoxide dismutase (SOD)-like activity and nitrogen radical scavenging activity and promote angiogenesis and fibroblast migration. The doping of Cu2Se NSs into the F127 hydrogel does not have a significantly affect on the properties of the hydrogel. This hybridized hydrogel not only adapts to the irregular and complex morphology of acute wounds but also prolongs the duration of nanozyme action on the wound, thus promoting wound healing. Transcriptomic analysis further reveals the potential therapeutic mechanism of the Cu2Se/F127 hydrogel in promoting acute wound healing. Animal experiments have shown that the Cu2Se/F127 hydrogel has good biosafety. The Cu2Se/F127 hydrogel provides an innovative idea for the development of hydrogel dressings for the treatment of acute wounds.

Development of a tannic acid- and silicate ion-functionalized PVA-starch composite hydrogel for in situ skeletal muscle repairing

The repair capacity of skeletal muscle is severely diminished in massive skeletal muscle injuries accompanied by inflammation, resulting in muscle function loss and scar tissue formation. In the current work, we developed a tannic acid (TA)- and silicate ion-functionalized tissue adhesive poly(vinyl alcohol) (PVA)-starch composite hydrogel, referred to as PSTS (PVA-starch-TA-SiO32-). It was formed based on the hydrogen bonding of TA to organic polymers, as well as silicate-TA ligand interaction. PSTS could be gelatinized in minutes at room temperature with crosslinked network formation, making it applicable for injection. Further investigations revealed that PSTS had skeletal muscle-comparable conductivity and modulus to act as a temporary platform for muscle repairing. Moreover, PSTS could release TA and silicate ions in situ to inhibit bacterial growth, induce vascularization, and reduce oxidation, paving the way to the possibility of creating a favorable microenvironment for skeletal muscle regeneration and tissue fibrosis control. The in vivo model confirmed that PSTS could enhance muscle fiber regeneration and myotube formation, as well as reduce infection and inflammation risk. These findings thereby implied the great potential of PSTS in the treatment of formidable skeletal muscle injuries.

Progress in injectable hydrogels for the treatment of incompressible bleeding: an update

Uncontrollable haemorrhage from deep, noncompressible wounds remains a persistent and intractable challenge, accounting for a very high proportion of deaths in both war and disaster situations. Recently, injectable hydrogels have been increasingly studied as potential haemostatic materials, highlighting their enormous potential for the management of noncompressible haemorrhages. In this review, we summarize haemostatic mechanisms, commonly used clinical haemostatic methods, and the research progress on injectable haemostatic hydrogels. We emphasize the current status of injectable hydrogels as haemostatic materials, including their physical and chemical properties, design strategy, haemostatic mechanisms, and application in various types of wounds. We discuss the advantages and disadvantages of injectable hydrogels as haemostatic materials, as well as the opportunities and challenges involved. Finally, we propose cutting-edge research avenues to address these challenges and opportunities, including the combination of injectable hydrogels with advanced materials and innovative strategies to increase their biocompatibility and tune their degradation profile. Surface modifications for promoting cell adhesion and proliferation, as well as the delivery of growth factors or other biologics for optimal wound healing, are also suggested. We believe that this paper will inform researchers about the current status of the use of injectable haemostatic hydrogels for noncompressible haemorrhage and spark new ideas for those striving to propel this field forward.

Bifunctional Carbosilane Dendrimers for the Design of Multipurpose Hydrogels with Antibacterial Action

The emergence of antibiotic resistance is a serious global health problem. There is an incessant demand for new antimicrobial drugs and materials that can address this global issue from different angles. Dendritic hydrogels have appeared as a promising strategy. A family of bifunctional amphiphilic carbosilane dendrimers was designed and employed as nanosized cross-linking points for the synthesis of high-swelling hydrogels using the highly efficient Thiol-Ene click reaction for their preparation. Both stoichiometric and off-stoichiometric conditions were studied, generating hydrogels with pendant hydroxyl or alkene moieties. These hydrogels were found to be tunable antibacterial materials. They can easily be postmodified with relevant antibiotic moieties through covalent attachment on the hydroxyl or alkene pendant groups, generating ammonium-decorated networks with temperature and pH-responsive properties. Additionally, they can efficiently encapsulate drugs with poor solubility in water, like ciprofloxacin, and perform a sustained release over time, as demonstrated in preliminary assays against Staphylococcus aureus.

Mussel-inspired proteins functionalize catheter with antifouling and antibacterial properties

Bacterial adhesion and subsequent biofilm formation on catheter can cause inevitably infection. The development of multifunctional antibacterial coating is a promising strategy to resist the bacteria adhesion and biofilm formation. Herein, a mussel-inspired chimeric protein MZAgP is prepared and employed to modify a variety of polymeric catheters. The MZAgP is composed of mussel-adhesive peptide, zwitterionic peptide, and silver-binding peptide, which can endow catheters with antifouling, bactericidal and biocompatibility performances. Expectedly, negligible biofilm is observed on the MZAgP coated catheters after incubating with bacteria for 120 h. And ignorable hemolysis and cytotoxicity are obtained on coated catheters. In addition, the modified catheters also display persistent antifouling and bacteriostatic properties throughout 168 h under hydrodynamic conditions. Moreover, the coated catheters still remain excellent antifouling and antibacterial properties even after 2 months of storage. This multifunctional coating may be promising as antibacterial and antibiofilm material, and the coated catheters are potential in clinical application.

Advances in Functional Hydrogel Wound Dressings: A Review

One of the most advanced, promising, and commercially viable research issues in the world of hydrogel dressing is gaining functionality to achieve improved therapeutic impact or even intelligent wound repair. In addition to the merits of ordinary hydrogel dressings, functional hydrogel dressings can adjust their chemical/physical properties to satisfy different wound types, carry out the corresponding reactions to actively create a healing environment conducive to wound repair, and can also control drug release to provide a long-lasting benefit. Although a lot of in-depth research has been conducted over the last few decades, very few studies have been properly summarized. In order to give researchers a basic blueprint for designing functional hydrogel dressings and to motivate them to develop ever-more intelligent wound dressings, we summarized the development of functional hydrogel dressings in recent years, as well as the current situation and future trends, in light of their preparation mechanisms and functional effects.

(Controlled) Free radical (co)polymerization of multivinyl monomers: strategies, topological structures and biomedical applications

Free radical (co)polymerization (FRP/FRcP) of multivinyl monomers (MVMs) has emerged as a powerful strategy for the synthesis of chemically and topologically complex polymers due to its unique reaction kinetics, which enables the preparation of polymers with multiple functional groups and novel macromolecular structures. However, conventional FRP/FRcP of MVMs inevitably leads to insoluble crosslinked materials. Therefore, the development of advanced strategies for the controlled polymerization of MVMs is essential for the preparation of chemically and topologically complex polymers. In this review, we introduce the gelation mechanism of conventional FRP of MVMs and present the strategies of controlled polymerization of MVMs for the preparation of chemically and topologically complex polymers. We also discuss polymers with unique topologies synthesized by controlled polymerization of MVMs, such as crosslinked networks, (hyper)branched, star, cyclic, and single-chain cyclized/knotted structures. Finally, biomedical applications of various advanced polymeric materials prepared by controlled polymerization of MVMs are highlighted and the challenges is this field are discussed.

Biocide loaded shear-thinning hydrogel with anti-biofilm efficacy cures topical infection

The continuous intervention of multidrug-resistant (MDR) bacterial infections worsens and slows the dynamicity of natural wound healing processes. Fortunately, antibiotics, metal ions, or metal nanoparticle-loaded antimicrobial hydrogels have been developed to tackle infections at injury sites and speed up the healing process. Despite their success, these marketed released based hydrogels are still limited owing to their lack of broad-spectrum activity, inability to tackle biofilm-associated infections, susceptibility towards resistance development, fast release kinetics, and mild to moderate toxicity. To address these shortcomings, we report the development of a biocompatible, shear-thinning, injectable gellan-gelatin hydrogel loaded with a peptidomimetic potent biocide (ASAM-10). The hydrogel upon sustained biocide release (60% within 72 h), displays a broad-spectrum antibacterial activity with negligible in vitro (hemolysis < 20%) and in vivo toxicity (no adverse effects on dermal layer of mice). Besides tackling bacterial dormant subpopulation (1-6 Log reduction), the optimized hydrogel is able to disrupt the preformed bacterial biofilm and even kill the biofilm-trapped pathogens with enhanced pathogenicity. Above all, the lead hydrogel was proficient in tackling methicillin-resistant Staphylococcus aureus (MRSA) wound infections in a mouse model through its safe topical administration. Overall, the biocide-loaded hydrogel can be considered as a promising candidate to combat MDR chronic infections at the wound site.

Hybrid suture coating for dual-staged control over antibacterial actions to match well wound healing progression

Absorbable sutures have moved to the forefront in surgical fields with a huge market. Antibacterial activity is one indispensable feature for the next generation of absorbable sutures. This study develops a simple and cost-effective coating method to endow sutures with staged control over antibacterial actions to achieve enhanced dual stages of the wound healing process. This method is achieved in aqueous solution under mild conditions without the usage of any organic solvent and reserves the fundamental properties of suture materials, based on the pH-dependent reversible self-polymerization of tannic acid (TA) together with the strong adhesion of poly (tannic acid) (PTA) not only toward the suture surface but also with TA. Just by changing pH of TA solution, a hybrid coating (MPTA) composed of PTA and TA could be readily formed on the commercialized sutures originating from synthetic and natural materials. In the initial post-surgery stage, wound sites are susceptible to aseptic and/or bacterial inflammation. The resulting acid conditions induce burst release of antibacterial TA mostly coming from the adsorbed TA monomer. In the later stage, TA release is tailored totally depending on the pH conditions determined by the healing degree of wounds, allowing the sustained antibacterial prevention in a biologically adjustable manner. Thus, antibacterial MPTA coating meets the rigid requirements that differ distinctly during two major wound healing stages. Nontoxic MPTA coating on sutures leads to excellent post-implantation outcomes regarding bacterial prevention/elimination, anti-inflammation, tissue repair and wound healing. Moreover, MPTA coating provides sutures with a robust platform for functional expansion due to the matrix-independent adhesive ability of PTA.

M, Zarrintaj P, Formela K, Saeb MR, Bencherif SA. Clickable Polysaccharides for Biomedical Applications: A Comprehensive Review

Recent advances in materials science and engineering highlight the importance of designing sophisticated biomaterials with well-defined architectures and tunable properties for emerging biomedical applications. Click chemistry, a powerful method allowing specific and controllable bioorthogonal reactions, has revolutionized our ability to make complex molecular structures with a high level of specificity, selectivity, and yield under mild conditions. These features combined with minimal byproduct formation have enabled the design of a wide range of macromolecular architectures from quick and versatile click reactions. Furthermore, copper-free click chemistry has resulted in a change of paradigm, allowing researchers to perform highly selective chemical reactions in biological environments to further understand the structure and function of cells. In living systems, introducing clickable groups into biomolecules such as polysaccharides (PSA) has been explored as a general approach to conduct medicinal chemistry and potentially help solve healthcare needs. De novo biosynthetic pathways for chemical synthesis have also been exploited and optimized to perform PSA-based bioconjugation inside living cells without interfering with their native processes or functions. This strategy obviates the need for laborious and costly chemical reactions which normally require extensive and time-consuming purification steps. Using these approaches, various PSA-based macromolecules have been manufactured as building blocks for the design of novel biomaterials. Clickable PSA provides a powerful and versatile toolbox for biomaterials scientists and will increasingly play a crucial role in the biomedical field. Specifically, bioclick reactions with PSA have been leveraged for the design of advanced drug delivery systems and minimally invasive injectable hydrogels. In this review article, we have outlined the key aspects and breadth of PSA-derived bioclick reactions as a powerful and versatile toolbox to design advanced polymeric biomaterials for biomedical applications such as molecular imaging, drug delivery, and tissue engineering. Additionally, we have also discussed the past achievements, present developments, and recent trends of clickable PSA-based biomaterials such as 3D printing, as well as their challenges, clinical translatability, and future perspectives.

Design, synthesis, and characterization of novel eco-friendly chitosan-AgIO3 bionanocomposite and study its antibacterial activity

This work reports a facile and green approach to preparing AgIO₃ nanoparticles decorated with chitosan (chitosan-AgIO₃). The bionanocomposite was fully characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM) images, energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction analysis (XRD). The antibacterial effect of chitosan-AgIO₃ bionanocomposite was investigated for Pseudomonas aeruginosa, Klebsiella pneumoniae, Staphylococcus saprophyticus, Escherichia coli, and Staphylococcus aureus as pathogen microorganisms via the plate count method, disk diffusion method, and optical density (OD) measurements. The antibacterial performance of the bionanocomposite was compared with two commercial drugs (penicillin and silver sulfadiazine) and in some cases, the synthesized bionanocomposite has a better effect in the eradication of bacteria. The bionanocomposite represented great antibacterial properties. Flow cytometry was performed to investigate the mechanism of bionanocomposite as an antibacterial agent. Reactive oxygen species (ROS) production was responsible for the bactericidal mechanisms. These results demonstrate that the chitosan-AgIO₃ bionanocomposite, as a kind of antibacterial material, got potential for application in a broad range of biomedical applications and water purification. The design and synthesis of green and biodegradable antibacterial materials with simple processes and by using readily available materials cause the final product to be economically affordable and could be scaled in different industries.

COCu: A Robust Self-Regenerative Hydrogel with Applicability as Both Hydrated Gel Dressing and Dry Suture for Seamless Tissue Fixation and Repair

Self-regenerative hydrogels have recently been developed, and represent a special type of self-healing hydrogels with the ability to restore a dehydrated hydrogel with physical damage. In this study, a self-regenerative hydrogel (COCu) based on two chitosan polymers assembled by slow-released Cu²⁺ is developed. The COCu hydrogel displays an excellent regeneration ability after being dehydrated and fractured. By simple hydration at room temperature, the fragments of the dehydrated gel fuse into one seamless whole, thereby preserving the mechanical properties and functionalities of the original hydrogel. The regeneration process can be conducted repeatedly after different methods of dehydration (natural volatilization, heat drying, lyophilization) and various modes of deconstruction (flakes, powder, lumpy sponge, etc.). Furthermore, the COCu hydrogel provides ultra-stretchability, and it can be stretched into thin (0.01-0.1 mm) filaments, which, when dried (dtCOCu), can be used as suture lines. Moreover, when used as a dry suture, it regenerates into the hydrogel in the presence of the tissue fluid, forming an excellent sealant to immobilize tissues and seamlessly seal wounds. The fast self-regeneration allows for its facile application as both a hydrated gel dressing and dry suture, and offers customized strategies for fixing and repair of different wounds in soft tissues.

Emerging Fabrication Strategies of Hydrogels and Its Applications

Recently, hydrogels have been investigated for the controlled release of bioactive molecules, such as for living cell encapsulation and matrices. Due to their remote controllability and quick response, hydrogels are widely used for various applications, including drug delivery. The rate and extent to which the drugs reach their targets are highly dependent on the carriers used in drug delivery systems; therefore the demand for biodegradable and intelligent carriers is progressively increasing. The biodegradable nature of hydrogel has created much interest for its use in drug delivery systems. The first part of this review focuses on emerging fabrication strategies of hydrogel, including physical and chemical cross-linking, as well as radiation cross-linking. The second part describes the applications of hydrogels in various fields, including drug delivery systems. In the end, an overview of the application of hydrogels prepared from several natural polymers in drug delivery is presented.

Antibacterial biomaterials for skin wound dressing

Bacterial infection and the ever-increasing bacterial resistance have imposed severe threat to human health. And bacterial contamination could significantly menace the wound healing process. Considering the sophisticated wound healing process, novel strategies for skin tissue engineering are focused on the integration of bioactive ingredients, antibacterial agents included, into biomaterials with different morphologies to improve cell behaviors and promote wound healing. However, a comprehensive review on anti-bacterial wound dressing to enhance wound healing has not been reported. In this review, various antibacterial biomaterials as wound dressings will be discussed. Different kinds of antibacterial agents, including antibiotics, nanoparticles (metal and metallic oxides, light-induced antibacterial agents), cationic organic agents, and others, and their recent advances are summarized. Biomaterial selection and fabrication of biomaterials with different structures and forms, including films, hydrogel, electrospun nanofibers, sponge, foam and three-dimension (3D) printed scaffold for skin regeneration, are elaborated discussed. Current challenges and the future perspectives are presented in this multidisciplinary field. We envision that this review will provide a general insight to the elegant design and further refinement of wound dressing.

Functional Hydrogels as Wound Dressing to Enhance Wound Healing

Hydrogels, due to their excellent biochemical and mechnical property, have shown attractive advantages in the field of wound dressings. However, a comprehensive review of the functional hydrogel as a wound dressing is still lacking. This work first summarizes the skin wound healing process and relates evaluation parameters and then reviews the advanced functions of hydrogel dressings such as antimicrobial property, adhesion and hemostasis, anti-inflammatory and anti-oxidation, substance delivery, self-healing, stimulus response, conductivity, and the recently emerged wound monitoring feature, and the strategies adopted to achieve these functions are all classified and discussed. Furthermore, applications of hydrogel wound dressing for the treatment of different types of wounds such as incisional wound and the excisional wound are summarized. Chronic wounds are also mentioned, and the focus of attention on infected wounds, burn wounds, and diabetic wounds is discussed. Finally, the future directions of hydrogel wound dressings for wound healing are further proposed.

A Strong Dual-Component Bioadhesive Based on Solventless Thiol-isocyanate Click Chemistry

Isocyanate is an efficient tissue anchor for engineering of strong bioadhesives. However, isocyanate-containing adhesives were seldom manufactured due to their requirement of water-free administration and time-consuming moisture-induced solidification. To address this issue, here, a solventless dual-component bioadhesive based on thiol-isocyanate cross-linking chemistry is reported. This dual-component bioadhesive consists of a hyperbranched polymer with thiol groups (HBPTE) and an isocyanate-modified polyethylene glycol (PEGNCO). HBPTE and PEGNCO are low-viscosity fluids at room temperature and hence could be used directly as adhesive components, in the absence of a catalyst and a solvent. The thiol-isocyanate click chemistry of components provides the HBPTE-PEGNCO mixture with a gelation time of 1.8-3 min, which makes it acceptable for practical applications. The abundance of isocyanate groups in the adhesive molecule provides strong bonding strength through formation of chemical linkages with reactive groups on the tissue. Moreover, in vitro and in vivo evaluations showed excellent biocompatibility of the HBPTE-PEGNCO adhesive. This dual-component bioadhesive based on solventless thiol-isocyanate click chemistry displayed a fast gelation time and excellent bonding performance, providing a pioneering idea for engineering isocyanate-containing bioadhesives.

Hybrid natural hydrogels integrated with voriconazole-loaded microspheres for ocular antifungal applications

Fungal keratitis is a major threat to ocular morbidity and blindness. The therapeutic efficacy of eye drops against fungal keratitis is limited by their poor bioavailability, especially in patients with corneal stromal ulcers that lead to tissue defects. Therefore, intervention measures that can control fungal infection while promoting tissue regeneration are desirable. Herein, we designed and fabricated natural antifungal hydrogels that comprise a decellularized porcine cornea (DPC), gelatin and microspheres (MCs) containing voriconazole (Vor) for the management of fungal keratitis with focal corneal stromal defects. The size and structure of the Vor-loaded MCs were characterized by scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The antifungal drug Vor showed that continuous release from the hybrid hydrogel system for up to 7 days and that MCs loading did not affect the mechanical properties, in vitro release profile or cytocompatibility of the hybrid hydrogel. Moreover, the Vor-loaded hydrogels exhibited excellent antifungal properties against F. solani and A. fumigatus. The efficiency of the natural antifungal hydrogel was evaluated by an ex vivo infectious rabbit corneal defect model. After 24 h, the number of fungal colony-forming units (CFU) significantly decreased in antifungal hydrogel-treated corneal tissue compared with that in non-treated corneas and corneas treated with hydrogels without Vor. The above results demonstrated that this natural hydrogel-based drug delivery system holds great promise for preventing fungal keratitis infection while promoting focal corneal stromal regeneration. Additionally, natural hybrid hydrogels might be a candidate material for use with various drugs in the effective treatment of many other ocular diseases.

Biodegradable macro-porous CMC-polyaniline hydrogel: synthesis, characterization and study of microbial elimination and sorption capacity of dyes from waste water

Certainly water pollution control will play a key role in environmental health. Therefore, researchers are attempting to reduce the ecological effects of water pollution by creating restrictions in the use of chemicals or water reuse. Among all the available techniques, adsorption method attracted much attention due to the higher efficiency, cost-effectiveness and simplicity. So, in this work, novel biodegradable hydrogel based on carboxymethyl cellulose (CMC) and polyaniline (PANI) was introduced to remove toxic dyes from wastewater. The synthesis process was accomplished in two steps: free radical polymerization of acrylic acid (AA) on the CMC (0.25 g) in the presence of ammonium per sulfate (APS) as radical initiator (0.2 g) and N,N-methylene-bis-acrylamide (MBA) as crosslinker (0.1 g) at 70 °C, and after 30 min, growing PANI chains on the synthesized CMC-PAA hydrogel by radical polymerization of aniline (1.0 mL) in acidic condition (20 mL of hydrochloric acid 1.0 M) to form macro-porous conductive hydrogel (CMC-PAA-PANI). The resulted hydrogel showed high antibacterial activity and excellent biodegradability by natural soil microorganisms with decomposition to 91.7 %. Also, the final hydrogel exhibited reasonable conductivity and pH sensitivity properties.

Mussel-Inspired Polymeric Coatings to Realize Functions from Single and Dual to Multiple Antimicrobial Mechanisms

Numerous efforts to fabricate antimicrobial surfaces by simple yet universal protocols with high efficiency have attracted considerable interest but proved to be particularly challenging. Herein, we designed and fabricated a series of antimicrobial polymeric coatings with different functions from single to multiple mechanisms by selectively utilizing diethylene glycol diglycidyl ether (PEGDGE), polylysine, and poly[glycidylmethacrylate-co-3-(dimethyl(4-vinylbenzyl)ammonium)propyl sulfonate] (poly(GMA-co-DVBAPS)) via straightforward mussel-inspired codeposition techniques. Bactericidal polylysine endowed the modified surfaces with a high ability (∼90%) to kill attached bacteria, while PEGDGE components with unique surface hydration prevented bacterial adhesion, avoiding the initial biofilm formation. Moreover, excellent salt-responsive poly(GMA-co-DVBAPS) enabled reactant polymeric coatings to change chain conformations from shrinkable to stretchable state and subsequently release >90% attached bacteria when treated with NaCl solution, even after repeated cycles. Therefore, the obtained polymeric coatings, polydopamine/poly(GMA-co-DVBAPS) (PDA/PDV), polydopamine/polylysine/poly(GMA-co-DVBAPS) (PDA/l-PDV), and polydopamine/polylysine/poly(GMA-co-DVBAPS)/diethylene glycol diglycidyl ether (PDA/l-PDV-PEGDGE), controllably realized functions from single and dual to multiple antimicrobial mechanisms, as evidenced by long-term antifouling activity to bacteria, high bactericidal efficiency, and salt-responsive bacterial regeneration performance with several bacterial killing-release cycles. This study not only contributes to mussel-inspired chemistry for polymeric coatings with controllable functions but also provides a series of reliable and highly efficient antimicrobial surfaces for potential biomedical applications.

Antimicrobial and degradable triazolinedione (TAD) crosslinked polypeptide hydrogels

Hydrogels are perfectly suited to support cell and tissue growth in advanced tissue engineering applications as well as classical wound treatment scenarios. Ideal hydrogel materials for these applications should be easy to produce, biocompatible, resorbable and antimicrobial. Here we report the fabrication of degradable covalent antimicrobial lysine and tryptophan containing copolypeptide hydrogels, whereby the hydrogel properties can be independently modulated by the copolypeptide monomer ratio and chiral composition. Well-defined statistical copolypeptides comprising different overall molecular weights as well as ratios of l- and d-lysine and tryptophan at ratios of 35 : 15, 70 : 30 and 80 : 20 were obtained by N-carboxyanhydride (NCA) polymerisation and subsequently crosslinked by the selective reaction of bifunctional triazolinedione (TAD) with tryptophan. Real-time rheology was used to monitor the crosslinking reaction recording the fastest increase and overall modulus for copolypeptides with the higher tryptophan ratio. Water uptake of cylindrical hydrogel samples was dependent on crosslinking ratio but found independent of chiral composition, while enzymatic degradation proceeded significantly faster for samples containing more l-amino acids. Antimicrobial activity on a range of hydrogels containing different polypeptide chain lengths, lysine/tryptophan composition and l/d enantiomers was tested against reference laboratory strains of Gram-negative Escherichia coli (E. coli; ATCC25922) and Gram-positive, Staphylococcus aureus (S. aureus; ATCC25923). log reductions of 2.8-3.4 were recorded for the most potent hydrogels. In vitro leachable cytotoxicity tests confirmed non-cytotoxicity as per ISO guidelines.

Cytocompatibility Evaluation of a Novel Series of PEG-Functionalized Lactide-Caprolactone Copolymer Biomaterials for Cardiovascular Applications

Although the use of bioresorbable materials in stent production is thought to improve long-term safety compared to their durable counterparts, a recent FDA report on the 2-year follow-up of the first FDA-approved bioresorbable vascular stent showed an increased occurrence of major adverse cardiac events and thrombosis in comparison to the metallic control. In order to overcome the issues of first generation bioresorbable polymers, a series of polyethylene glycol-functionalized poly-L-lactide-co-ε-caprolactone copolymers with varying lactide-to-caprolactone content is developed using a novel one-step PEG-functionalization and copolymerization strategy. This approach represents a new facile way toward surface enhancement for cellular interaction, which is shown by screening these materials regarding their cyto- and hemocompatibility in terms of cytotoxicity, hemolysis, platelet adhesion, leucocyte activation and endothelial cell adhesion. By varying the lactide-to-caprolactone polymer composition, it is possible to gradually affect endothelial and platelet adhesion which allows fine-tuning of the biological response based on polymer chemistry. All polymers developed were non-cytotoxic, had acceptable leucocyte activation levels and presented non-hemolytic (<2% hemolysis rate) behavior except for PLCL-PEG 55:45 which presented hemolysis rate of 2.5% ± 0.5. Water contact angles were reduced in the polymers containing PEG functionalization (PLLA-PEG: 69.8° ± 2.3, PCL-PEG: 61.2° ± 7.5) versus those without (PLLA: 79.5° ± 3.2, PCL: 76.4° ± 10.2) while the materials PCL-PEG550, PLCL-PEG550 90:10 and PLCL-PEG550 70:30 demonstrated best endothelial cell adhesion. PLLA-PEG550 and PLCL-PEG550 70:30 presented as best candidates for cardiovascular implant use from a cytocompatibility perspective across the spectrum of testing completed. Altogether, these polymers are excellent innovative materials suited for an application in stent manufacture due to the ease in translation of this one-step synthesis strategy to device production and their excellent in vitro cyto- and hemocompatibility.

Fabrication of self-healing hydrogel from quaternized N-[3(dimethylamino)propyl]methacrylamide copolymer for antimicrobial and drug release applications

Self-healing hydrogels have attracted great attention in recent years because of their wide application in bioscience and biotechnology. In this study, P(DMAPMA-stat-DAA) were synthesized by Reversible Addition-Fragmentation Chain Transfer (RAFT) polymerization and quaternized to import antimicrobial properties. Then quaternized P(DMAPMA-stat-DAA) was used to prepare hydrogel containing acylhydrazone groups with Polyethylene oxide (PEO) diacylhydrazide as a cross-linking agent. The acylhydrazone groups imparted a variety of properties, including group responsiveness and self-healing properties to the hydrogel. At the same time, the quaternary ammonium endowed the hydrogel with the antimicrobial property. The mechanical property, self-healing properties, and antimicrobial property of hydrogels were investigated intensively. Results showed hydrogels formed in neutral conditions, and the luminescent property was introduced with PEO₂₃ dinaphthhydrazide (DNH) cross-linking. The hydrogels showed a controlled pH-sensitive DOX·HC l and Ovalbumin (OVA) release profile. In addition, the hydrogel showed the antimicrobial property and may have important applications in the biomedical field in the near future.

Photo-Cross-Linked Poly(ethylene glycol) Diacrylate Hydrogels: Spherical Microparticles to Bow Tie-Shaped Microfibers

Bow tie-shaped fibers and spherical microparticles with controlled dimensions and shapes were fabricated with poly(ethylene glycol) diacrylate hydrogel utilizing hydrodynamic shear principles and a photopolymerization strategy under a microfluidic regime. Decreasing the flow rate ratio between the core and sheath fluids from 25 (50:2) to 1.25 (100:80) resulted in increasing the particles size and reducing the production rate by 357 and 86%, respectively. The width of the fibers increased by a factor of 1.4 when the flow rate ratio was reduced from 2.5 to 1 due to the decrease of the shear force at the fluid/fluid interface. The stress at break and Young's modulus of the fibers were enhanced by 32 and 63%, respectively, when the sheath-to-core flow rate ratio decreased from 100:40 to 100:80. The fiber fabrication was simulated using the finite element method, and the numerical and experimental results were in agreement. Adult hippocampal stem/progenitor cells and bone-marrow-derived multipotent mesenchymal stromal cells were seeded onto the fibrous scaffolds in vitro, and cellular adhesion, proliferation, and differentiation were investigated. Microgrooves on the fibers' surface were shown to positively affect cell adhesion when compared to flat fibers and planar controls.

Multiple-Responsive Dendronized Hyperbranched Polymers

By combining topological structures of hyperbranched polymers with dendronized polymers, a series of hyperbranched poly(acylhydrazone)s pendanted with 3-fold branched dendritic oligoethylene glycol (OEG) units were efficiently prepared through A2 + B3 polycondensation. The constituents of these dendritic polymers can be mediated through dynamic covalent acylhydrazones. Owing to the dense OEG pendants, these dendronized hyperbranched polymers are biocompatible and thermoresponsive, and their cloud points (T cps) can be modulated by the branched architecture, solution pH, and addition of a third component. Cell viability in the presence of these hyperbranched poly(acylhydrazone)s can be maintained above 80%. Based on the unique dendritic architecture with rich acylhydrazine groups, dynamic hydrogels cross-linked via acylhydrazone linkages with good mechanical property were prepared, which inherit the characteristic thermoresponsive behavior of the polymer precursors and also show remarkable self-healing properties. This novel kind of topological polymers and their corresponding hydrogels with dynamic and multiple smart properties may have promising applications as biomaterials.

Silver nanoparticles as an effective disinfectant: A review

The paradigm modifications in the metallic crystals from bulky to micro-size to nano-scale have resulted in excellent and amazing properties; which have been the remarkable interests in a wider range of applications. Particularly, Ag NPs have much attention owing to their distinctive optical, chemical, electrical and catalytic properties that can be tuned with surface nature, size, shapes, etc. and hence these crystals have been used in various fields such as catalysis, sensor, electronic components, antimicrobial agents in the health industry etc. Among them, Ag NPs based disinfectants have paid attention due to the practical applications in our daily life. Therefore the Ag NPs have been used in different sectors such as silver-based air/water filters, textile, animal husbandry, biomedical and food packaging etc. In this review, the Ag NPs as a disinfectant in different sectors have been included in detail.

Promising Recent Strategies with Potential Clinical Translational Value to Combat Antibacterial Resistant Surge

Multiple drug resistance (MDR) for the treatment of bacterial infection has been a significant challenge since the beginning of the 21st century. Many of the small molecule-based antibiotic treatments have failed on numerous occasions due to a surge in MDR, which has claimed millions of lives worldwide. Small particles (SPs) consisting of metal, polymer or carbon nanoparticles (NPs) of different sizes, shapes and forms have shown considerable antibacterial effect over the past two decades. Unlike the classical small-molecule antibiotics, the small particles are less exposed so far to the bacteria to trigger a resistance mechanism, and hence have higher chances of fighting the challenge of the MDR process. Until recently, there has been limited progress of clinical treatments using NPs, despite ample reports of in vitro antibacterial efficacy. In this review, we discuss some recent and unconventional strategies that have explored the antibacterial efficacy of these small particles, alone and in combination with classical small molecules in vivo, and demonstrate possibilities that are favorable for clinical translations in near future.

Chemical Synthesis and Characterization of Poly(poly(ethylene glycol) methacrylate)-Grafted CdTe Nanocrystals via RAFT Polymerization for Covalent Immobilization of Adenosine

This paper describes the functionalization of poly(poly(ethylene glycol) methacrylate) (PPEGMA)-grafted CdTe (PPEGMA-g-CdTe) quantum dots (QDs) via surface-initiated reversible addition–fragmentation chain transfer (SI-RAFT) polymerization for immobilization of adenosine. Initially, the hydroxyl-coated CdTe QDs, synthesized using 2-mercaptoethanol (ME) as a capping agent, were coupled with a RAFT agent, S-benzyl S′-trimethoxysilylpropyltrithiocarbonate (BTPT), through a condensation reaction. Then, 2,2′-azobisisobutyronitrile (AIBN) was used to successfully initiate in situ RAFT polymerization to generate PPEGMA-g-CdTe nanocomposites. Adenosine-above-PPEGMA-grafted CdTe (Ado-i-PPEGMA-g-CdTe) hybrids were formed by the polymer shell, which had successfully undergone bioconjugation and postfunctionalization by adenosine (as a nucleoside). Fourier transform infrared (FT-IR) spectrophotometry, energy-dispersive X-ray (EDX) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy results indicated that a robust covalent bond was created between the organic PPEGMA part, cadmium telluride (CdTe) QDs, and the adenosine conjugate. The optical properties of the PPEGMA-g-CdTe and Ado-i-PPEGMA-g-CdTe hybrids were investigated by photoluminescence (PL) spectroscopy, and the results suggest that they have a great potential for application as optimal materials in biomedicine.

Near-infrared light-controllable on-demand antibiotics release using thermo-sensitive hydrogel-based drug reservoir for combating bacterial infection

A near-infrared (NIR) light-triggerable thermo-sensitive hydrogel-based drug reservoir that can realize on-demand antibiotics release and hyperthermia-assisted bacterial inactivation was prepared to combat bacterial infection and promote wound healing. The drug reservoir was fabricated by mixing ciprofloxacin (Cip, a potent antibiotic)-loaded polydopamine (PDA) nanoparticles (NPs) and glycol chitosan (GC) to form an injectable hydrogel (PDA NP-Cip/GC hydrogel, abbreviated as Gel-Cip). On the one hand, the positive charge of GC and the adsorbability of PDA NPs made bacteria be readily trapped on the surface of Gel-Cip. On the other hand, the Gel-Cip exhibited minimal leakage under physiological conditions, but could boost Cip release upon NIR light irradiation. Meanwhile, NIR light irradiation could activate the photothermal PDA NPs, and the generated local hyperthermia induced the destruction of the bacterial integrity, leading to bacterial inactivation in a synergistic way. Moreover, the exceptional bacterial killing activity and outstanding wound healing ability of the system were also verified by the S. aureus-infected mouse skin defect model. Taken together, the light-activatable hydrogel-based platform allows us to release antibiotics more precisely, eliminate bacteria more effectively, and inhibit bacteria-induced infections more persistently, which will advance the development of novel antibacterial agents and strategies.

A hybrid injectable hydrogel from hyperbranched PEG macromer as a stem cell delivery and retention platform for diabetic wound healing

The injectable hydrogel with desirable biocompatibility and tunable properties can improve the efficacy of stem cell-based therapy. However, the development of injectable hydrogel remains a great challenge due to the restriction of crosslinking efficiency, mechanical properties, and potential toxicity. Here, we report that a new injectable hydrogel system was fabricated from hyperbranched multi-acrylated poly(ethylene glycol) macromers (HP-PEGs) and thiolated hyaluronic acid (HA-SH) and used as a stem cell delivery and retention platform. The new HP-PEGs were synthesized via in situ reversible addition fragmentation chain transfer (RAFT) polymerization using an FDA approved anti-alcoholic drug-Disulfiram (DS) as the RAFT agent precursor. HP-PEGs can form injectable hydrogels with HA-SH rapidly via thiol-ene click reaction under physiological conditions. The hydrogels exhibited stable mechanical properties, non-swelling and anti-fouling properties. Hydrogels encapsulating adipose-derived stem cells (ADSCs) have demonstrated promising regenerative capabilities such as the maintenance of ADSCs' stemness and secretion abilities. The ADSCs embedded hydrogels were tested on the treatment of diabetic wound in a diabetic murine animal model, showing enhanced wound healing.

STATEMENT OF SIGNIFICANCE

Diabetic wounds, which are a severe type of diabetes, have become one of the most serious clinical problems. There is a great promise in the delivery of adipose stem cells into wound sites using injectable hydrogels that can improve diabetic wound healing. Due to the biocompatibility of poly(ethylene glycol) diacrylate (PEGDA), we developed an in situ RAFT polymerization approach using anti-alcoholic drug-Disulfiram (DS) as a RAFT agent precursor to achieve hyperbranched PEGDA (HP-PEG). HP-PEG can form an injectable hydrogel by crosslinking with thiolated hyaluronic acid (HA-SH). ADSCs can maintain their regenerative ability and be delivered into the wound sites. Hence, diabetic wound healing process was remarkably promoted, including inhibition of inflammation, enhanced angiogenesis and re-epithelialization. Taken together, the ADSCs-seeded injectable hydrogel may be a promising candidate for diabetic wound treatment.

Silver bullets: A new lustre on an old antimicrobial agent

Silver was widely used in medicine to treat bacterial infections in the 19th and early 20th century, up until the discovery and development of the first modern antibiotics in the 1940s, which were markedly more effective. Since then, every new antibiotic introduced to the clinic has led to an associated development of drug resistance. Today, the threat of extensive bacterial resistance to antibiotics has reignited interest in alternative strategies to treat infectious diseases, with silver regaining well-deserved renewed attention. Silver ions are highly disruptive to bacterial integrity and biochemical function, with comparatively minimal toxicity to mammalian cells. This review focuses on the antimicrobial properties of silver and their use in synergistic combination therapy with traditional antibiotic drugs.

Recent Progress in Polymer Research to Tackle Infections and Antimicrobial Resistance

Global health is increasingly being threatened by the rapid emergence of drug-resistant microbes. The ability of these microbes to form biofilms has further exacerbated the scenario leading to notorious infections that are almost impossible to treat. For addressing this clinical threat, various antimicrobial polymers, polymer-based antimicrobial hydrogels and polymer-coated antimicrobial surfaces have been developed in the recent past. This review aims to discuss such polymer-based antimicrobial strategies with a focus on their current advancement in the field. Antimicrobial polymers, whose designs are inspired from antimicrobial peptides (AMPs), are described with an emphasis on structure-activity analysis. Additionally, antibiofilm activity and in vivo efficacy are delineated to elucidate the real potential of these antimicrobial polymers as possible therapeutics. Antimicrobial hydrogels, prepared from either inherently antimicrobial polymers or biocide-loaded into polymer-derived hydrogel matrix, are elaborated followed by various strategies to engineer polymer-coated antimicrobial surfaces. In the end, the current challenges are accentuated along with future directions for further expansion of the field toward tackling infections and antimicrobial resistance.

Biomedical Potential of Ultrafine Ag Nanoparticles Coated on Poly (Gamma-Glutamic Acid) Hydrogel with Special Reference to Wound Healing

In wound care management, the prevention of wound infection and the retention of an appropriate level of moisture are two major challenges. Therefore, designing an excellent antibacterial hydrogel with a suitable water-adsorbing capacity is very important to improve the development of wound dressings. In this paper, a novel silver nanoparticles/poly (gamma-glutamic acid) (γ-PGA) composite dressing was prepared for biomedical applications. The promoted wound-healing ability of the hydrogels were systematically evaluated with the aim of attaining a novel and effective wound dressing. A diffusion study showed that hydrogels can continuously release antibacterial factors (Ag). Hydrogels contain a high percentage of water, providing an ideal moist environment for tissue regeneration, while also preventing contraction of the wound. Moreover, an in vivo, wound-healing model evaluation of artificial wounds in mice indicated that silver/γ-PGA hydrogels could significantly promote wound healing. Histological examination revealed that hydrogels can successfully help to reconstruct intact epidermis and collagen deposition during 14 days of impaired wound healing. Overall, this research could shed new light on the design of antibacterial silver/γ-PGA hydrogels with potential applications in wound dressing.

Preparation and Characterization of Silver Sulfadiazine-Loaded Polyvinyl Alcohol Hydrogels as an Antibacterial Wound Dressing

In this study, we prepared a series of silver sulfadiazine (AgSD)-loaded polyvinyl alcohol (PVA) hydrogels via electron beam (e-beam) irradiation. Our objective was to explore the influence of e-beam irradiation on the chemical structure and crystallinity of AgSD and the antibacterial properties of AgSD/PVA hydrogels. Prior to irradiation, we mixed AgSD in PVA solution in 2 forms, either suspended in water (WS) or dissolved in ammonia solution (AS). We noted that nano silver was released from AgSD/PVA-AS hydrogels immersed in deionized water, while it would not happen in AgSD/PVA-WS hydrogels. Both kinds of AgSD/PVA hydrogels exhibited good antibacterial activities against gram-negative Escherichia coli and gram-positive Staphylococcus aureus. And their antibacterial activity was not obviously affected by different dosages of e-beam irradiation. Moreover, the antibacterial activity of the AgSD/PVA-WS hydrogels was stronger than that of AgSD/PVA-AS. Accordingly, the cell cytotoxicity of the AgSD/PVA-WS hydrogels was higher than that of AgSD/PVA-AS. Our study results reveal that e-beam irradiation of PVA solution with dispersed AgSD is a simple and efficient way to prepare AgSD/PVA hydrogels, which might be an ideal antibacterial wound dressing.

Nanoinitiator for enzymatic anaerobic polymerization and graft enhancement of gelatin-PAAM hydrogel

As an emerging method for mildly molding polymer hydrogel bioscaffolds, the enzymatically polymerized system is mainly based on the screening of various oxidoreductases to produce radicals, but the design of multifunctional nanoinitiators to facilitate hydrogel performance remains challenging. Here, we utilize N-hydroxyimide-modified silica nanoparticles as nanoinitiators to simultaneously trigger glucose oxidase anaerobic polymerization and nanoparticle-grafting enhancement of the gelatin-polyacrylamide (PAAM) hydrogel. The enzyme-nanoinitiator system produced nitrogen radicals, which were further converted into carbon radicals via GOx-catalyzed glucose reduction, as confirmed by electron paramagnetic resonance (EPR) analysis. Our stretchable hydrogel has a 12-fold increased fracture energy relative to traditional hydrogel due to grafting enhancement by the nanoinitiator. The temperature-dependent physical crosslinking of gelatin endowed our hydrogel facile printing ability. Cytotoxicity assay and 3D cell culture demonstrated the low toxicity of our hydrogel. As the first example of the use of nanoinitiators for enzymatic polymerization, this work provides a biocompatible platform to prepare or print hydrogel bioscaffolds with the required mechanical strength.

An injectable supramolecular hydrogel hybridized with silver nanoparticles for antibacterial application

Silver nanoparticles (AgNPs) show long-lasting and broad-spectrum antibacterial activity. Herein, PEGylated AgNPs were prepared in situ by complexing AgNO₃ with the random copolymer of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and polyacrylic acid via electrostatic interaction followed by in situ reduction. AgNP hybrid supramolecular hydrogels were thus prepared through host-guest inclusion between PEGMA side chains and α-cyclodextrins in aqueous solution. The hydrogels were physically cross-linked by both pseudopolyrotaxane crystallization and AgNPs, which showed temperature responsiveness and self-healing properties. By hybridizing AgNPs, the hydrogels showed excellent antibacterial properties against S. aureus and E. coli bacteria as well as low cytotoxicity and have potential applications as injectable antibacterial materials.

Injectable and Degradable pH-Responsive Hydrogels via Spontaneous Amino-Yne Click Reaction

Injectable hydrogels have attracted increasing attention in tissue regeneration and local drug delivery applications. Current click reactions for preparing injectable hydrogels often require a photoinitiator or catalyst, which may be toxic and may involve complex synthesis of precursors. Here, we report a facile and inexpensive method to prepare injectable and degradable hydrogels via spontaneous amino-yne click reaction without using any initiator or catalyst under physiological conditions based on telechelic electron-deficient dipropiolate ester of polyethylene glycol and water-soluble commercially available carboxymethyl chitosan (CMC). The gelation time, mechanical property, and degradation rate of the hydrogels could be adjusted by varying CMC concentrations and stoichiometric ratios. The reversible pH-induced sol-gel transitions of the hydrogel are presented and the pH-controlled drug release behaviors are demonstrated, of which the mechanism is discussed. In vitro cytotoxicity assays and in vivo in situ injection study of the CMC-based hydrogels showed favorable gel formation, nontoxicity, and good tissue biocompatibility. Therefore, these biodegradable and injectable hydrogels prepared by spontaneous amino-yne click reaction hold potential for tissue engineering and other biomedical applications.

Direct Synthesis of Dextran-Based Antibacterial Hydrogels for Extended Release of Biocides and Eradication of Topical Biofilms

Cationic small molecular biocides have been developed as promising antibiofilm agents because of their tunability in chemical structures and their ability to disrupt established biofilms. However, the impact of biocides in antibiofilm treatment is largely limited due to the lack of an effective delivery system that can ensure sustained release of biocides at the target site. Herein we report a biocide-encapsulated antibacterial and antibiofilm hydrogel that acts as an efficient delivery vehicle for the biocide and eradicates matured bacterial biofilm. The hydrogels are prepared using dextran methacrylate (Dex-MA), a biocompatible and photopolymerizable polymer, and a nontoxic cationic biocide with two cationic charges, two nonpeptidic amide bonds, and optimized amphiphilicity, which is capable of eradicating established bacterial biofilms. The gels, prepared via direct loading of the biocide and with highly controllable amounts, display 100% activity against both drug-sensitive and drug-resistant bacteria such as methicillin-resistant Staphylococcus aureus (MRSA). Importantly, the gels are shown to release the biocide and kill bacteria for an extended period of time (until day 5). When being treated with the established bacterial biofilms, the released biocide from the gel is shown to completely eradicate establishedS. aureus, Escherichia coli, and MRSA biofilms, the most common biofilm forming bacteria that cause severe infections (e.g., skin infections, urinary tract infections, etc.) in humans. Moreover, the gels were shown to annihilate preformed MRSA biofilm with >99.99% bacterial reduction under in vitro and in vivo conditions in a superficial MRSA infection model in mice. Notably, when tested, excellent skin compatibility is observed for these materials in various animal models such as a rat model of acute dermal toxicity, guinea pig model of skin sensitization, and rabbit model of skin irritation. The biocompatible antibacterial and antibiofilm hydrogels developed herein thus might be useful in treating bacterial biofilm associated infections, especially topical infections.

Minimizing Skin Scarring through Biomaterial Design

Wound healing continues to be a major burden to patients, though research in the field has expanded significantly. Due to an aging population and increasing comorbid conditions, the cost of chronic wounds is expected to increase for patients and the U.S. healthcare system alike. With this knowledge, the number of engineered products to facilitate wound healing has also increased dramatically, with some already in clinical use. In this review, the major biomaterials used to facilitate skin wound healing will be examined, with particular attention allocated to the science behind their development. Experimental therapies will also be evaluated.