Ultrasensitive Photoelectrochemical Biosensing of Cell Surface N-Glycan Expression Based on the Enhancement of Nanogold-Assembled Mesoporous Silica Amplified by Graphene Quantum Dots and Hybridization Chain Reaction

Harnessing aptamers for the biosensing of cell surface glycans - A review

Cell surface glycans (CSGs) are essential for cell recognition, adhesion, and invasion, and they also serve as disease biomarkers. Traditional CSG recognition using lectins has limitations such as limited specificity, low stability, high cytotoxicity, and multivalent binding. Aptamers, known for their specific binding capacity to target molecules, are increasingly being employed in the biosensing of CSGs. Aptamers offer the advantage of high flexibility, small size, straightforward modification, and monovalent recognition, enabling their integration into the profiling of CSGs on living cells. In this review, we summarize representative examples of aptamer-based CSG biosensing and identify two strategies for harnessing aptamers in CSG detection: direct recognition based on aptamer-CSG binding and indirect recognition through protein localization. These strategies enable the generation of diverse signals including fluorescence, electrochemical, photoacoustic, and electrochemiluminescence signals for CSG detection. The advantages, challenges, and future perspectives of using aptamers for CSG biosensing are also discussed.

Photoelectrochemical sensors based on paper and their emerging applications in point-of-care testing

Point-of-care testing (POCT) technology is urgently required owing to the prevalence of the Internet of Things and portable electronics. In light of the attractive properties of low background and high sensitivity caused by the complete separation of excitation source and detection signal, the paper-based photoelectrochemical (PEC) sensors, featured with fast in analysis, disposable and environmental-friendly have become one of the most promising strategies in POCT. Therefore, in this review, the latest advances and principal issues in the design and fabrication of portable paper-based PEC sensors for POCT are systematically discussed. Primarily, the flexible electronic devices that can be constructed by paper and the reasons why they can be used in PEC sensors are expounded. Afterwards, the photosensitive materials involved in paper-based PEC sensor and the signal amplification strategies are emphatically introduced. Subsequently, the application of paper-based PEC sensors in medical diagnosis, environmental monitoring and food safety are further discussed. Finally, the main opportunities and challenges of paper-based PEC sensing platforms for POCT are briefly summarized. It provides a distinct perspective for researchers to construct paper-based PEC sensors with portable and cost-effective, hoping to enlighten the fast development of POCT soon after, as well as benefit human society.

Highly Sensitive Detection of Carbaryl Pesticides Using Potentiometric Biosensor with Nanocomposite Ag/r-Graphene Oxide/Chitosan Immobilized Acetylcholinesterase Enzyme

Novel, sensitive, selective, efficient and portable electrochemical biosensors are needed to detect residual contaminants of the pesticide 1-naphthyl methylcarbamate (carbaryl) in the environment, food, and essential biological fluids. In this work, a study of nanocomposite-based Ag reduced graphene oxide (rGO) and chitosan (CS) that optimise surface conditions for immobilisation of acetylcholinesterase (AChE) enzyme to improve the performance of catalytic biosensors is examined. The Ag/rGO/CS nanocomposite membrane was used to determine carbaryl pesticide using a potentiometer transducer. The AChE enzyme-based biosensor exhibits a good affinity for acetylthiocholine chloride (ATCl). It can catalyse the hydrolysis of ATCl with a potential value of 197.06 mV, which is then oxidised to produce a detectable and rapid response. Under optimal conditions, the biosensor detected carbaryl pesticide at concentrations in the linear range of 1.0 × 10−8 to 1.0 μg mL−1 with a limit of detection (LoD) of 1.0 × 10−9 μg mL−1. The developed biosensor exhibits a wide working concentration range, detection at low concentrations, high sensitivity, acceptable stability, reproducibility and simple fabrication, thus providing a promising tool for pesticide residue analysis.

Nanoarchitectured prototypes of mesoporous silica nanoparticles for innovative biomedical applications

Despite exceptional morphological and physicochemical attributes, mesoporous silica nanoparticles (MSNs) are often employed as carriers or vectors. Moreover, these conventional MSNs often suffer from various limitations in biomedicine, such as reduced drug encapsulation efficacy, deprived compatibility, and poor degradability, resulting in poor therapeutic outcomes. To address these limitations, several modifications have been corroborated to fabricating hierarchically-engineered MSNs in terms of tuning the pore sizes, modifying the surfaces, and engineering of siliceous networks. Interestingly, the further advancements of engineered MSNs lead to the generation of highly complex and nature-mimicking structures, such as Janus-type, multi-podal, and flower-like architectures, as well as streamlined tadpole-like nanomotors. In this review, we present explicit discussions relevant to these advanced hierarchical architectures in different fields of biomedicine, including drug delivery, bioimaging, tissue engineering, and miscellaneous applications, such as photoluminescence, artificial enzymes, peptide enrichment, DNA detection, and biosensing, among others. Initially, we give a brief overview of diverse, innovative stimuli-responsive (pH, light, ultrasound, and thermos)- and targeted drug delivery strategies, along with discussions on recent advancements in cancer immune therapy and applicability of advanced MSNs in other ailments related to cardiac, vascular, and nervous systems, as well as diabetes. Then, we provide initiatives taken so far in clinical translation of various silica-based materials and their scope towards clinical translation. Finally, we summarize the review with interesting perspectives on lessons learned in exploring the biomedical applications of advanced MSNs and further requirements to be explored.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Recent Development of Nanomaterials-Based Cytosensors for the Detection of Circulating Tumor Cells

The accurate analysis of circulating tumor cells (CTCs) holds great promise in early diagnosis and prognosis of cancers. However, the extremely low abundance of CTCs in peripheral blood samples limits the practical utility of the traditional methods for CTCs detection. Thus, novel and powerful strategies have been proposed for sensitive detection of CTCs. In particular, nanomaterials with exceptional physical and chemical properties have been used to fabricate cytosensors for amplifying the signal and enhancing the sensitivity. In this review, we summarize the recent development of nanomaterials-based optical and electrochemical analytical techniques for CTCs detection, including fluorescence, colorimetry, surface-enhanced Raman scattering, chemiluminescence, electrochemistry, electrochemiluminescence, photoelectrochemistry and so on.

Ultrasensitive zero-background photoelectrochemical biosensor for analysis of organophosphorus pesticide based on in situ formation of DNA-templated Ag2S photoactive materials

Herein, a novel signal-on photoelectrochemical (PEC) biosensor with nearly zero background noise (ZBN) was first fabricated to determine the presence of organophosphorus pesticide based on in situ formation of DNA-templated Ag₂S photoactive materials, accompanied by hybridization chain reaction (HCR) signal amplification. The capture probe (S1) on the gold nanoparticle-modified electrode can hybridize with the aptamer molecule to generate a simple PEC biosensor. In the presence of a target molecule, the aptamer molecule is released on the double-stranded DNA (dsDNA)-modified PEC biosensor. Meanwhile, the capture probe remains on the electrode and can open the DNA hairpins (H1, H2) which are rich in cytosine, to trigger the HCR reaction. The rich "C" strands are uncovered after formation of a long dsDNA polymer strand, which can assemble multiple silver ions (Ag⁺) by means of by C-Ag⁺-C chelation. Then, a large number of Ag₂S can be generated by challenging with S^2- solution, producing a satisfactory photocurrent signal. The photoactive material is formed in situ, which eliminates the laborious operation. Moreover, the signal can be highly amplified with nearly zero background noise and HCR signal amplification. Under optimal conditions, the ZBN aptasensor exhibited high sensitivity and selectivity, with a low detection limit of 2 pg mL^-1 for malathion. Importantly, the sensing platform can also be applied to determine the presence of malathion in real samples. In this assay, a novel signal-on photoelectrochemical biosensor with nearly zero background noise was first fabricated to determine the presence of organophosphorus pesticide based on in situ formation of DNA-templated Ag₂S photoactive materials, accompanied by hybridization chain reaction signal amplification.

Smart Biosensors for Cancer Diagnosis Based on Graphene Quantum Dots

The timely diagnosis of cancer represents the best chance to increase treatment success and to reduce cancer deaths. Nanomaterials-based biosensors containing graphene quantum dots (GQDs) as a sensing platform show great promise in the early and sensitive detection of cancer biomarkers, due to their unique chemical and physical properties, large surface area and ease of functionalization with different biomolecules able to recognize relevant cancer biomarkers. In this review, we report different advanced strategies for the synthesis and functionalization of GQDs with different agents able to selectively recognize and convert into a signal specific cancer biomarkers such as antigens, enzymes, hormones, proteins, cancer related byproducts, biomolecules exposed on the surface of cancer cells and changes in pH. The developed optical, electrochemical and chemiluminescent biosensors based on GQDs have been shown to ensure the effective diagnosis of several cancer diseases as well as the possibility to evaluate the effectiveness of anticancer therapy. The wide linear range of detection and low detection limits recorded for most of the reported biosensors highlight their great potential in clinics for the diagnosis and management of cancer.

Hybridization chain reaction and its applications in biosensing

To pursue the sensitive and efficient detection of informative biomolecules for bioanalysis and disease diagnosis, a series of signal amplification techniques have been put forward. Among them, hybridization chain reaction (HCR) is an isothermal and enzyme-free process where the cascade reaction of hybridization events is initiated by a target analyte, yielding a long nicked dsDNA molecule analogous to alternating copolymers. Compared with conventional polymerase chain reaction (PCR) that can proceed only with the aid of polymerases and complicated thermal cycling, HCR has attracted increasing attention because it can occur under mild conditions without using enzymes. As a powerful signal amplification tool, HCR has been employed to construct various simple, sensitive and economic biosensors for detecting nucleic acids, small molecules, cells, and proteins. Moreover, HCR has also been applied to assemble complex nanostructures, some of which even act as the carriers to execute the targeted delivery of anticancer drugs. Recently, HCR has engendered tremendous progress in RNA imaging applications, which can not only achieve endogenous RNA imaging in living cells or even living animals but also implement imaging-guided photodynamic therapy, paving a promising path to promote the development of theranostics. In this review, we begin with the fundamentals of HCR and then focus on summarizing the recent advances in HCR-based biosensors for biosensing and RNA imaging strategies. Further, the challenges and future perspective of HCR-based signal amplification in biosensing and theranostic application are discussed.

Advanced Signal-Amplification Strategies for Paper-Based Analytical Devices: A Comprehensive Review

Paper-based analytical devices (PADs) have emerged as a promising approach to point-of-care (POC) detection applications in biomedical and clinical diagnosis owing to their advantages, including cost-effectiveness, ease of use, and rapid responses as well as for being equipment-free, disposable, and user-friendly. However, the overall sensitivity of PADs still remains weak, posing a challenge for biosensing scientists exploiting them in clinical applications. This review comprehensively summarizes the current applicable potential of PADs, focusing on total signal-amplification strategies that have been applied widely in PADs involving colorimetry, luminescence, surface-enhanced Raman scattering, photoacoustic, photothermal, and photoelectrochemical methods as well as nucleic acid-mediated PAD modifications. The advances in signal-amplification strategies in terms of signal-enhancing principles, sensitivity, and time reactions are discussed in detail to provide an overview of these approaches to using PADs in biosensing applications. Furthermore, a comparison of these methods summarizes the potential for scientists to develop superior PADs. This review serves as a useful inside look at the current progress and prospective directions in using PADs for clinical diagnostics and provides a better source of reference for further investigations, as well as innovations, in the POC diagnostics field.

Ultrasensitive DNA Detection Based on Inorganic-Organic Nanocomposite Cosensitization and G-Quadruplex/Hemin Catalysis for Signal Amplification

A novel photoelectrochemical (PEC) aptasensor was fabricated for DNA detection based on the coupling of cosensitization and peroxidase-like catalytic activity. Specifically, the surfaces of branched-TiO₂ nanorods (B-TiO₂ NRs) were modified with Cd²⁺ and S²⁺ to obtain B-TiO₂ NRs/CdS hybrid structures, which were subsequently used as matrices to immobilize hairpin DNA (hDNA) probes. CdTe/TCPP (TCPP = meso-tetra(4-carboxyphenyl)-porphine) used for signal amplification was labeled on the terminal of the hDNA probe. Without the target DNA (tDNA) presence, the immobilized hDNA probe with CdTe/TCPP possessed a hairpin form and was located near the B-TiO₂ NRs/CdS electrode surface, forming a cosensitized structure formation and then generating strong photocurrent with H₂O₂ as the electron donor. During detection, the specific recognition of tDNA by the sensing hDNA probe triggered the formation of the G-quadruplex/hemin DNAzyme, which effectively catalyzed the decomposition of H₂O₂. Meanwhile, cosensitization disappeared when the hDNA probe hybridized with tDNA, further reducing the photocurrent. With a double-signal amplification strategy, the sensing platform designed in this work demonstrated a linear detection ability in the 0.5 fM-5 nM range with a detection limit equal to 0.14 fM. Notably, through encoding in the base sequences of the hDNA and marking it, a versatile PEC platform could be structured for the detection of various DNA targets, which could promise applications in point-of-care diagnostic fields.

Amplified electrochemiluminescence signals promoted by the AIE-active moiety of D-A type polymer dots for biosensing

Three-component conjugated polymers of a strong donor-acceptor (D-A) type could be synthesized by Pd-catalyzed Suzuki coupling polymerization reaction of 1,2-bis(4-bromophenyl)-1,2-diphenylethene (M-1) with 9-octyl-3,6-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-9H-carbazole (M-2) and 4,6-bis((E)-4-bromostyryl)-2,2-difluoro-5-phenyl-2H-1l3,3,2l4-dioxaborinine (M-3). Among them, P-1 and P-2 with high TPE ratios at 0.95 and 0.9 showed obvious aggregation-induced emission (AIE) behavior; in contrast P-3 with a low TPE ratio at 0.8 showed an aggregation-caused quenching (ACQ) phenomenon. In particular, the three resulting polymer dots (P-1 to P-3 Pdots) exhibited a 200 mV lower electrochemiluminescence (ECL) potential due to their strong D-A electronic structure. Most importantly, the ECL signals of Pdots could be enhanced as high as 3 times by increasing their AIE-active TPE moiety ratios from 0.8 (P-3) to 0.95 (P-1) via the band gap emission process. Herein, P-1 Pdots with the strongest ECL signal were successfully used as ECL biosensors for the detection of catechol, epinephrine and dopamine with detection limits of 1, 7 and 3 nM, respectively. This work provides a new strategy for developing highly sensitive ECL biosensors by the smart structure design of the AIE-active Pdots.

Applications of Graphene Quantum Dots in Biomedical Sensors

Due to the proliferative cancer rates, cardiovascular diseases, neurodegenerative disorders, autoimmune diseases and a plethora of infections across the globe, it is essential to introduce strategies that can rapidly and specifically detect the ultralow concentrations of relevant biomarkers, pathogens, toxins and pharmaceuticals in biological matrices. Considering these pathophysiologies, various research works have become necessary to fabricate biosensors for their early diagnosis and treatment, using nanomaterials like quantum dots (QDs). These nanomaterials effectively ameliorate the sensor performance with respect to their reproducibility, selectivity as well as sensitivity. In particular, graphene quantum dots (GQDs), which are ideally graphene fragments of nanometer size, constitute discrete features such as acting as attractive fluorophores and excellent electro-catalysts owing to their photo-stability, water-solubility, biocompatibility, non-toxicity and lucrativeness that make them favorable candidates for a wide range of novel biomedical applications. Herein, we reviewed about 300 biomedical studies reported over the last five years which entail the state of art as well as some pioneering ideas with respect to the prominent role of GQDs, especially in the development of optical, electrochemical and photoelectrochemical biosensors. Additionally, we outline the ideal properties of GQDs, their eclectic methods of synthesis, and the general principle behind several biosensing techniques.

Analysis of glycan expression on cell surfaces by using a glassy carbon electrode modified with MnO2 nanosheets and DNA-generated electrochemical current

Electrochemical assay for analysis of cell surface glycan expression is reported. Mannose on human breast cancer cells (type MCF-7) is selected as the glycan model. Gold nanoparticles are modified with binding aptamer for MCF-7 cells and act as electrochemical probe. The analysis of cell surface glycan expression follows a traditional sandwich protocol. Concanavalin A that can specifically recognize mannose is immobilized onto MnO₂ nanosheets modified electrode for the capture of MCF-7 cells. Then, the modified gold nanoparticles are immobilized onto the electrode via the binding between MCF-7 cell and aptamer on the gold nanoparticles. The aptamer on the gold nanoparticles reacts with molybdate. More specifically, the reaction of the phosphate backbone of aptamer with molybdate results in the formation of a redox-active molybdophosphate precipitate and generates an electrochemical current. The current intensity at 0.20 V (vs. Ag/AgCl) is recorded to test the linear range of the assay. The assay shows an obvious response to MCF-7 cells with a wide linear range from 1.0 × 10³ to 1.0 × 10⁶ cells mL^-1 and a limit of detection down to 300 cells mL^-1. The assay can be used to selectively monitor the change of mannose expression on cell surfaces upon the treatment with the N-glycan inhibitor. Graphical abstractSchematic of an electrochemical assay for analysis of cell surface glycan expression of MCF-7 cancer cells.

Paper-Based Microfluidics for Electrochemical Applications

Paper-based microfluidics is characteristic of fluid transportation through spontaneous capillary action of paper and has exhibited great promise for a variety of applications especially for sensing. Furthermore, paper-based microfluidics enables the design of miniaturized electrochemical devices to be applied in the energy sector, which is especially attractive for the rapid growing market of small size disposable electronics. This review gives a brief summary on the basics of paper chemistry and capillary-driven microfluidic behavior, and highlights recent advances of paper-based microfluidics in developing electrochemical sensing devices and miniaturized energy storage/conversion devices. Their structural features, working principles and exemplary applications are comprehensively elaborated and discussed. Additionally, this review also points out the existing challenges and future opportunities of paper-based microfluidic electronics.

Affinity-Based Detection of Biomolecules Using Photo-Electrochemical Readout

Detection and quantification of biologically-relevant analytes using handheld platforms are important for point-of-care diagnostics, real-time health monitoring, and treatment monitoring. Among the various signal transduction methods used in portable biosensors, photoelectrochemcial (PEC) readout has emerged as a promising approach due to its low limit-of-detection and high sensitivity. For this readout method to be applicable to analyzing native samples, performance requirements beyond sensitivity such as specificity, stability, and ease of operation are critical. These performance requirements are governed by the properties of the photoactive materials and signal transduction mechanisms that are used in PEC biosensing. In this review, we categorize PEC biosensors into five areas based on their signal transduction strategy: (a) introduction of photoactive species, (b) generation of electron/hole donors, (c) use of steric hinderance, (d) in situ induction of light, and (e) resonance energy transfer. We discuss the combination of strengths and weaknesses that these signal transduction systems and their material building blocks offer by reviewing the recent progress in this area. Developing the appropriate PEC biosensor starts with defining the application case followed by choosing the materials and signal transduction strategies that meet the application-based specifications.

Aptamer-based electrochemical cytosensors for tumor cell detection in cancer diagnosis: A review

Circulating tumor cells, a type of viable cancer cell circulating from primary or metastatic tumors in the blood stream, can lead to the parallel development of primary tumors and metastatic lesions. Highly selective and sensitive detection of tumor cells has become a hot research topic and can provide a basis for early diagnosis of cancers and anticancer drug evaluation to develop the best treatment plan. Aptamers are single-stranded oligonucleotides that can bind to target tumor cells in unique three-dimensional structures with high specificity and affinity. Aptamer-based methods or signal amplification methods using aptamers show great potential in improving the selectivity and sensitivity of electrochemical (EC) cytosensors for tumor cell detection. This review covers the remarkable developments in aptamer-based EC cytosensors for the identification of cell type, cell counting and detection of crucial proteins on the cell surface. Various EC techniques have been developed for cancer cell detection, including common voltammetry or impedance, electrochemiluminescence and photoelectrochemistry in a direct approach (aptamer-target cell), sandwich approach (capture probe-target cell-signaling probe) or other approach. The current challenges and promising opportunities in the establishment of EC aptamer cytosensors for tumor cell detection are also discussed.

Recent advances in graphene-based nanomaterials: properties, toxicity and applications in chemistry, biology and medicine

This review (with 239 refs.) summarizes the progress that has been made in applications of graphene-based nanomaterials (such as plain graphene, graphene oxides, doped graphene oxides, graphene quantums dots) in biosensing, imaging, drug delivery and diagnosis. Following an introduction into the field, a first large section covers the toxicity of graphene and its derivatives (with subsections on bacterial toxicity and tissue toxicity). The use of graphene-based nanomaterials in sensors is reviewed next, with subsections on electrochemical, FET-based, fluorescent, chemiluminescent and colorimetric sensors and probes. The large field of imaging is treated next, with subchapters on optical, PET-based, and magnetic resonance based methods. A concluding section summarizes the current status, addresses current challenges, and gives an outlook on potential future trends. Graphical Abstract Schematic presentation of the potential applications of graphene-based materials in life science and biomedicine, emphatically reflected in some vital areas such as DNA analysis, biological monitoring, drug delivery, in vitro labelling, in vivo imaging, tumor target, etc.

Electrochemiluminescence Quenching Sensor of a Carboxylic Carbon Nanotubes Modified Glassy Carbon Electrode for Detecting Crystal Violet Based on Nitrogen-doped Graphene Quantum Dots@Peroxydisulfate System

In this work, the electrochemiluminscence system of nitrogen-doped graphene quantum dots (N-GQDs) and K₂S₂O₈ was built for the determination of crystal violet (CV). Meanwhile, a carboxylic carbon nanotubes modified glassy carbon electrode (CCNTs/GCE) was used as an ECL sensor. Thanks to the excellent electron transfer ability and large surface area of CCNTs, the ECL signal of N-GQDs@S₂O₈^2- was remarkablely amplified. With the presence of a low concentration of CV, a distinct decrease of the ECL signal was observed due to a quenching effect of CV on the ECL emission. Moreover, the quenched ECL intensity responded linearly to the logarithm of CV concentration within the range of 0.05 - 5 μmol/L, with a LOD of 45 nmol/L (S/N = 3). The proposed ECL system exhibited high sensitivity and specificity to CV, which was successfully applied in the practical detection of CV in real water samples from a local fishpond farm.

Microfluidic paper-based photoelectrochemical sensing platform with electron-transfer tunneling distance regulation strategy for thrombin detection

This work reports a microfluidic paper-based photoelectrochemical (μ-PEC) sensing platform for thrombin (TB) detection with electron-transfer tunneling distance regulation (ETTDR) and aptamer target-triggering nicking enzyme signaling amplification (NESA) dual strategies. Specifically, paper-based TiO₂ nanosheets (PTNs) were prepared with an efficient hydrothermal process, serving as the direct pathway for the charge carriers transfer. When CeO₂-labeled hairpin DNA 3 (HP3) was closely located at the PTNs, the CeO₂-PTNs heterostructure was formed, which could great facilitate the photogenerated carries separation of CeO₂. In addition, with the aid of aptamer target-triggering NESA strategy, the input TB could be transducted to numerous output target of DNA (tDNA), achieving the goal of desirable signal amplification. In the presence of TB, the output tDNA could be further hybridized with HP3 and unfold its hairpin loop, which forced the CeO₂ away from the surface of PTNs and vanished the CeO₂-PTNs heterostructure, resulting in the obviously reducing of photocurrent signal. The as-designed sensing platform exhibited a linear range from 0.02 pM to 100 pM with a detection limit of 6.7 fM. Importantly, this μ-PEC sensing platform could not only realize the highly efficient TB detection, but also pave a luciferous way for the detection of other protein in bioanalysis.

A design for the photoelectrochemical detection of miRNA-221 based on a tungsten diselenide–cysteine–dopamine nanoprobe coupled with mismatched catalytic hairpin assembly target recycling with ultra-low background noise

A strategy for the photoelectrochemical detection of miRNA with ultra-low background noise was developed using tungsten diselenide–cysteine–dopamine (WSe₂/Cys/DA) as a nanoprobe coupled with mismatched catalytic hairpin assembly target recycling.

Mesoporous silica nanoparticles for therapeutic/diagnostic applications

Based on unique intrinsic properties of mesoporous silica nanoparticles (MSNs) such as high surface area, large pore size, good biocompatibility and biodegradability, stable aqueous dispersion, they have received much attention in the recent decades for their applications as a promising platform in the biomedicine field. These porous structures possess a pore size ranging from 2 to 50 nm which make them excellent candidates for various biomedical applications. Herein, at first we described the common approaches of cargo loading and release processes from MSNs. Then, the intracellular uptake, safety and cytotoxicity aspects of MSNs are discussed as well. This review also highlights the most recent advances in the biomedical applications of MSNs, including 1) MSNs-based carriers, 2) MSNs as bioimaging agents, 3) MSNs-based biosensors, 4) MSNs as therapeutic agents (photodynamic therapy), 5) MSN based quantum dots, 6) MSNs as platforms for upconverting nanoparticles, and 6) MSNs in tissue engineering.

Direct laser writing of barriers with controllable permeability in porous glass

Barriers were produced in porous glass through its local bulk density modification by direct femtosecond writing accompanied by СО₂-laser surface thermal densification, to make functional microfluidic elements separated by such physical barriers with different controlled permeability. The separation of multi-component solutions into individual components with different molecule sizes (molecular separation) was performed in this first integrated microfluidic device fabricated in porous glass. Its application in the environmental gas-phase analysis was demonstrated.

A Sunlight Powered Portable Photoelectrochemical Biosensor Based on a Potentiometric Resolve Ratiometric Principle

As a new analysis tool, photoelectrochemical (PEC) biosensors have been widely studied in recent years. However, common PEC biosensors usually require a highly stable light source to excite the electrical signal and an electrochemical workstation to collect and process the signal data, which limited the development of portable PEC devices. Herein, we propose the design of a sunlight powered portable PEC biosensor that uses sunlight as the light source. The sunlight intensity changes over time and weather and results in varied background PEC currents. To eliminate the interference caused by unstable excitation light, the potentiometric resolve ratiometric principle was introduced. Coupled with a miniature electrochemical workstation and a laptop, a sensitive and portable PEC sensing platform was successfully developed. The detection may be achieved under the irradiation of sunlight and will no longer need an extra light source. In a proof of concept experiment, this platform was successfully applied in aflatoxin B1 analysis, which was promising in the development of portable biosensors.

Amplified electrochemiluminescence detection of CEA based on magnetic Fe3O4@Au nanoparticles-assembled Ru@SiO2 nanocomposites combined with multiple cycling amplification strategy

In this work, we designed a new strategy for ultrasensitive detection of CEA based on efficient electrochemiluminescence (ECL) quenching of Ru(bpy)₃²⁺-doped SiO₂ nanocomposite by ferrocene using target recycling amplification technique. A large number of Ru@SiO₂ ECL signal probe were firstly assembled on the novel magnetic core-shell Fe₃O₄@Au nanoparticles (NPs), then the ferrocene-labeled ECL quenching probe (Fc-probe) was linked to the magnetic NPs. Finally, numerous DNA1 sequences were produced by target CEA-triggered multiple recycling amplification and displaced the Fc-probe on the magnetic NPs, leading to significantly enhanced ECL signal for CEA detection. Because of the designed cascade signal amplification strategy, the newly developed method achieved a wide linear range of 10 fg/mL to 10 ng/mL with a low detection limit of  3.5 fg/mL. Furthermore, taking advantages of the magnetic Fe₃O₄@Au NPs for carring abundant signal probes, sensing target and ECL detection, the developed ECL strategy is convenient, rapid and displayed high sensitivity for CEA detection, which has great potential for analyzing the clinical samples in practical disease diagnosis applications.

Photogenerated Hole-Induced Chemical Redox Cycling on Bi2S3/Bi2Sn2O7 Heterojunction: Toward General Amplified Split-Type Photoelectrochemical Immunoassay

This work reports the elegant bridging of enzymatic generation of electron donor with photogenerated hole-induced chemical redox cycling amplification (RCA) for innovative photoelectrochemical (PEC) immunoassay, by the aid of a heterojunction photoelectrode with split-type strategy. Specifically, the system was exemplified by the alkaline phosphatase (ALP) catalytic generation of ascorbic acid (AA), the redox cycling of AA by tris (2-carboxyethyl) phosphine (TCEP) as reductant, and the use of a novel Bi₂S₃/Bi₂Sn₂O₇ heterojunction and myoglobin (Myo) as the photoelectrode and the target, respectively. After the immunoreaction and ALP-induced production of AA, the subsequent oxidation of AA by the photogenerated holes of the Bi₂S₃/Bi₂Sn₂O₇ heterojunction could be cycled via the regeneration of AA by TCEP from the oxidized product of dehydroascorbic acid, leading to easy signal amplification for the sensitive immunoassay of Myo in real samples. It is believed that this work provided a basis for further design and development of general RCA-based PEC immunoassays.

Organic Electrochemical Transistors for the Detection of Cell Surface Glycans

Cell surface glycans play critical roles in diverse biological processes, such as cell-cell communication, immunity, infection, development, and differentiation. Their expressions are closely related to cancer growth and metastasis. This work demonstrates an organic electrochemical transistor (OECT)-based biosensor for the detection of glycan expression on living cancer cells. Herein, mannose on human breast cancer cells (MCF-7) as the target glycan model, poly dimethyl diallyl ammonium chloride-multiwall carbon nanotubes (PDDA-MWCNTs) as the loading interface, concanavalin A (Con A) with active mannose binding sites, aptamer and horseradish peroxidase co-immobilized gold nanoparticles (HRP-aptamer-Au NPs) as specific nanoprobes are used to fabricate the OECT biosensor. In this strategy, PDDA-MWCNT interfaces can enhance the loading of Con A, and the target cells can be captured through Con A via active mannose binding sites. Thus, the expression of cell surface can be reflected by the amount of cells captured on the gate. Specific nanoprobes are introduced to the captured cells to produce an OECT signal because of the reduction of hydrogen peroxide catalyzed by HRP conjugated on Au nanoparticles, while the aptamer on nanoprobes can selectively recognize the MCF-7 cells. It is reasonable that more target cells are captured on the gate electrode, more HRP-nanoprobes are loaded thus a larger signal response. The device shows an obvious response to MCF-7 cells down to 10 cells/μL and can be used to selectively monitor the change of mannose expression on cell surfaces upon a treatment with the N-glycan inhibitor. The OECT-based biosensor is promising for the analysis of glycan expressions on the surfaces of different types of cells.

Highly Porous Metal-Free Graphitic Carbon Derived from Metal-Organic Framework for Profiling of N-Linked Glycans

In this work, a highly efficient profiling of N-linked glycans was achieved by a facile and eco-friendly synthesized highly porous metal-free carbon material. The metal-free carbon was derived from a well-defined nanorod zinc metal-organic framework via the metal removal under a high-temperature carbonization, which exhibited a highly specific surface area of 1700 m²/g. After further oxidation, the oxidized metal-free carbon was applied to the selective isolation of N-linked glycans from complex biological samples due to the strong interaction between carbon and glycan as well as the size-exclusion mechanism. Twenty six N-linked glycans could be identified from the digest of a standard glycoprotein ovalbumin at a concentration of 0.01 μg/μL, and the detection limit of glycans could be down to 1 ng/μL with 21 N-linked glycans identified. When the mass ratio of the interfering protein bovine serum albumin vs a standard ovalbumin digest is up to 500:1, there were 24 N-glycans confidentially identified. From a real complex sample of a healthy human serum, there were 43 N-linked glycans identified after the enrichment of oxidized metal-free carbon. In a word, the metal-free carbon is opening up new prospect for the high-throughput identification of glycan.

Strong Electrochemiluminescence from MOF Accelerator Enriched Quantum Dots for Enhanced Sensing of Trace cTnI

The development of a sensitive and practical electrochemiluminescence (ECL) bioassay relies on the use of ECL signal tags whose signal intensity is high and stable. In this work, strong ECL emission was achieved from metal organic framework (MOF) accelerator enriched quantum dots (CdTe), which were applied as an efficient ECL signal tag for trace biomarker detection. It is particularly noteworthy that a novel mechanism to drastically enhance the ECL intensity of CdTe is established because isoreticular metal organic framework-3 (IRMOF-3) with 2-amino terephthalic acid (2-NH₂-BDC) as the organic ligand not only allows for loading a large amount of CdTe via the encapsulating effect and internal/external decoration but also functions as a novel coreactant accelerator for promoting the conversion of coreactant S₂O₈^2- into the sulfate radical anion (SO₄^•-), further boosting the ECL emission of CdTe. On the basis of the simple sandwich immunoreaction approach, cardiac troponin-I antigen (cTnI), a kind of biomarker related with myocardial infarction, was chosen as a detection model using an IRMOF-3-enriched CdTe labeled antibody as the signal probe. This immunosensor demonstrated desirable assay performance for cTnI with a wide response range from 1.1 fg mL^-1 to 11 ng mL^-1 and a very low detection limit (0.46 fg mL^-1). This suggested that the IRMOF-3-enriched CdTe nanocomposite strategy can integrate the coreactant accelerator and luminophore to significantly enhance the ECL intensity and stability, providing a direction for promising ECL tag preparation with broad applications.

Ultrasensitive microfluidic paper-based electrochemical/visual biosensor based on spherical-like cerium dioxide catalyst for miR-21 detection

In this work, an electrochemical biosensor based on Au nanorods (NRs) modified microfluidic paper-based analytical devices (μPADs) were constructed for sensitive detection of microRNA (miRNA) by using cerium dioxide - Au@glucose oxidase (CeO₂-Au@GOx) as an electrochemical probe for signal amplification. Au NRs were synthesized by in-situ growth method in μPADs surface to enhance the conductivity and modified hairpin probe through Au-S bonds. The construction of "the signal transducer layer" was carried out by GOx catalyzing glucose to produce H₂O₂, which was further electrocatalyzed by CeO₂. After the biosensor was constructed, an obvious electrochemical signal was observed from the reduction of H₂O₂. In order to make the detection more convincing, the visual detection was performed based on the oxidation of 3,3',5,5'-tetramethylbenzidine by H₂O₂ with the help of Exonuclease I. The electrochemical biosensor provided a wide linear range of 1.0fM to 1000fM with a relatively low detection limit of 0.434fM by the electrochemical measurement. Linear range of 10fM to 1000fM with a relatively low detection limit of 7.382fM was obtained by visual detection. The results indicated the proposed platform has potential utility for detection of miRNA.