Electrocatalytic Cobalt Nanoparticles Interacting with Nitrogen-Doped Carbon Nanotube in Situ Generated from a Metal-Organic Framework for the Oxygen Reduction Reaction

Mesoporous waffle-like N-doped carbon with embedded Co nanoparticles for efficiently electrocatalytic oxygen reduction and evolution

Rational design and facile preparation of high-performance carbon-based eletrocatalysts for both oxygen reduction and evolution reactions (ORR and OER) is crucial for practical applications of rechargeable zinc-air batteries. Inspired by the fact that the metallic Co catalysis on the formation of carbon nanotubes (CNTs), this work develops a facial compression-pyrolysis route to synthesize a mesoporous waffle-like N-doped carbon framework with embedded Co nanoparticles (Co@pNC) using a Co metal-organic framework and melamine as precursors. The unique porous waffle-like carbon framework is built up of interwoven N-doped CNTs and graphene nanosheets, which offers abundant catalytic-active sites and rapid diffusion channels for intermediates and electrolyte. The optimized Co@pNC shows excellent bifunctional ORR/OER electrocatalytic activity in alkaline media with a half-wave potential (E_1/2) of 0.85 V for ORR and a small potential gap of 0.70 V between ORR E_1/2 and OER potential at 10 mA cm^-2. Its assembled battery exhibits a peak power density up to 150.3 mW cm^-2, an energy density of 928 Wh kg_Zn^-1 and superb rate capability. It highlights a facile component and architecture strategy to design high-performance carbon-based eletrocatalysts.

MOF-Derived Bimetallic Pd-Co Alkaline ORR Electrocatalysts

The development of highly active, durable, and low-cost electrocatalysts for the oxygen reduction reaction (ORR) has been of paramount importance for advancing and commercializing fuel cell technologies. Here, we report on a novel family of Pd-Co binary alloys (Pd_xCo, x = 1-6) embedded in bimetallic organic framework (BMOF)-derived polyhedral carbon supports. BMOF-derived Pd₃Co, annealed at 300-400 °C, exhibited the most promising ORR activity among the family of materials studied, with a half-wave potential (E_1/2) of 0.977 V vs RHE and a mass activity of 0.86 mA/μg_Pd in 1 M KOH, both values being superior to those of commercial Pd/C electrocatalysts. Moreover, it maintained robust durability after 20,000 potential cycles with a minimal degradation in E_1/2 of 10 mV. The enhanced performance and stability are ascribed to the uniform elemental distribution of Pd and Co and the Co-containing N-doped carbon (Co-N-C) structures. In anion exchange membrane fuel cell (AEMFC) tests, the peak power density of the cell employing a BMOF-derived Pd₃Co cathode reached 1.1 W/cm² at an ultralow Pd loading of 0.04 mg_Pd/cm². Strategies developed herein provide promising insights into the rational design and synthesis of highly active and durable ORR electrocatalysts for alkaline fuel cells.

N-doped carbon anchored CoS2/MoS2 nanosheets as efficient electrocatalysts for overall water splitting

The oriented two-dimensional porous nitrogen-doped carbon embedded with CoS₂ and MoS₂ nanosheets is a highly efficient bifunctional electrocatalyst. The hierarchical structure ensures fast mass transfer capacity in improving the electrocatalytic activity. And the greatly increased specific surface area is beneficial to expose more electrocatalytically active atoms. For oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) tests in 1 mol/L KOH solution, only 194 and 140 mV overpotential are required to achieve a current density of 10 mA/cm², respectively. Our research provides an effective strategy for synergizing the individual components in nanostructures for a wide range of electrocatalytic reactions.

A universal synthesis of MOF-Hydroxyl for highly active oxygen evolution

Since of their adjustable pore structure and variety of metal sites, MOFs materials have infinite possibilities, but their low intrinsic activity hinders them from being employed in electrolytic water. The sulfurization and oxidation of MOFs has proven to be a feasible technique for producing highly active catalytic materials. Here, the MOFs are completely converted to hydroxide by treatment with alkaline solutions only. Electron microscopy demonstrates that hydroxides generated from various MOFs retain the complete profile of the precursor and contain a two-dimensional lamellar or mesoporous structure. Fe-MIL-88(A)-OH, a two-dimensional structural transformation product generated from Fe-MIL-88(A), demonstrates significant OER performance increase. At the same 300 mV overpotential, Fe-MIL-88(A)-OH delivers 83 times the current density of Fe-MIL-88(A) and 16 times that of commercial IrO₂ (22.56 mA cm^-2 vs. 0.27 mA cm^-2 vs. 1.37 mA cm^-2). The alkali treatment strategy proved to be a generally applicable treatment for MOFs, allowing the conversion of nickel- and cobalt-based MOFs to hydroxide with a significant boost in OER performance.

Metal-Organic-Framework-Derived Cobalt nanoparticles encapsulated in Nitrogen-Doped carbon nanotubes on Ni foam integrated Electrode: Highly electroactive and durable catalysts for overall water splitting

The rational design and use of highly efficient, economic, and environmentally friendly bifunctional catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for developing methods for overall water splitting. Here, we report a facile self-catalyzed growth strategy for in situ encapsulation of Co nanoparticles with N-doped carbon nanotubes (NCNTs) on Ni foam (NF) (Co/NCNTs-NF-T; T represents the pyrolysis temperature). The zeolite imidazole framework (ZIF-67) precursor, which was used as a structure inducer, provided a Co source for catalyzing melamine graphitization and promoted in situ growth of NCNTs on the NF surface. This encapsulation structure and self-supporting system enhance the HER and OER activities of Co/NCNTs-NF-900 (low overpotentials of 66.98 mV for the HER and 240.32 mV for the OER at 10 mA cm^-2). This binder-free catalyst for overall water splitting, i.e., Co/NCNTs-NF-900, has excellent catalytic activity and durability. This method offers a facile and green strategy for designing highly active bifunctional electrocatalysts and paves the way for the future development of energy conversion/storage systems.

MOF-derived CoNi,CoO,NiO@N-C bifunctional oxygen electrocatalysts for liquid and all-solid-state Zn-air batteries

Metal-organic framework (MOF)-derived carbon composites with embedded metal alloy/metal oxides have attracted much attention due to their low-cost and excellent electrochemical reactivity. However, the drawback of this concept is the severe carbon evaporation during their synthesis, resulting in a reduction of active sites and catalytic durability. To solve this problem, this study proposes the possibility of using Ketjen black (KB) to replenish the carbon content. Impressively, MOF-derived bimetal and oxide N-doped porous carbon (CoNi-CoO-NiO@NC-800) exhibits extremely high catalytic activity with an oxygen reduction reaction (half-wave potential: 0.83 V) and oxygen evolution reaction (overpotential: 352 mV @ 10 mA cm^-2) potential gap of 0.75 V due to the virtue of the hierarchically porous structure and sufficient active sites. By combining theoretical studies, a strong synergetic coupling of the CoNi dual metal is proposed in decreasing the overall reaction barriers and promoting the reversible oxygen reactions. Moreover, the assembled liquid- and all-solid-state Zn-air batteries (ZABs) with the bifunctional catalyst as the air cathode demonstrate superior discharging (223 mW cm^-2 at 310 mA cm^-2) and charging-discharging performance and long lifetime (450 cycles, 75 h). This work will provide guidance for the rational design of metal/carbon hybrid catalysts and cut-price reproducible energy systems.

Carbon-nanotube-entangled Co,N-codoped carbon nanocomposite for oxygen reduction reaction

The design of highly efficient and stable electrocatalysts for oxygen reduction reaction (ORR) is still a great challenge. Herein, we prepared Co,N-codoped carbon nanocomposites (Co@NC-ZM) with entangled carbon nanotubes. The large Brunauer-Emmett-Teller surface area (604.7 m² g^-1), rich mesoporous feature, Co,N doping and synergetic effect between various species of Co@NC-ZM can expose more active sites and facilitate conductivity and mass transport. Benefiting from the above unique advantages, Co@NC-ZM exhibits excellent ORR performance with more positive onset potential (0.96 V) and half-wave potential (0.83 V) than those of commercial Pt/C (0.96 and 0.81 V, correspondingly). This work provides a new strategy for further exploring efficient non-precious-metal-based catalysts for ORR.

Consecutive Nucleation and Confinement Modulation towards Li Plating in Seeded Capsules for Durable Li-Metal Batteries

A dual modulation strategy of consecutive nucleation and confined growth of Li metal is proposed by using the metal-organic framework (MOF) derivative hollow capsule with inbuilt lithiophilic Au or Co-O nanoparticle (NP) seeds as heterogeneous host. The seeding-induced nucleation enables the negligible overpotential and promotes the inward injection of Li mass into the abundant cavities in host, followed by the conformal plating of Li on the outer surface of host during discharging. This modulation alleviates the dendrite growth and volume expansion of Li plating. The interconnected porous host network enables enhancement of cycling and rate performances of Li metal (a lifespan over 1200 h for Au-seeding symmetric cells, and an endurance of 220 cycles under an ultrahigh current density of 10 mA cm^-2 for corresponding asymmetric cells). The hollow capsules integrated with lithiophilic seeds solve the deformation problem of Li metal for durable and long-life Li-metal batteries.

Surfactant-free synthesis of copper nanoparticles and gas phase integration in CNT-composite materials

Copper nanoparticles (Cu-NPs) represent a viable low-cost alternative to replace bulk copper or other more expensive NPs (e.g. gold or silver) in various applications such as electronics for electrical contact materials or high conductivity materials. This study deals with the synthesis of well dispersed Cu-NPs by using an Ar + H₂ microplasma using a solid copper precursor. The morphological analysis is carried out by electron microscopy showing particles with a mean diameter of 8 nm. Crystallinity and chemical analyses were also carried out by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. In the second step, the Cu-NPs were successfully deposited onto porous carbon nanotube ribbons; surface coverage and the penetration depth of the Cu-NPs inside the CNT ribbon structure were investigated as these can be beneficial for a number of applications. The oxidation state of the Cu-NPs was also studied in detail under different conditions.

FeCo nanoalloys embedded in nitrogen-doped carbon nanosheets/bamboo-like carbon nanotubes for the oxygen reduction reaction

Herein, FeCo bimetallic organic frameworks (MOFs) with different compositions were fabricated by controlling the initial molar ratio of Fe³⁺/Co²⁺ ions.

Noble-Metal-Free Doped Carbon Nanomaterial Electrocatalysts

Electrocatalytic processes, such as oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and carbon dioxide reduction reaction (CO₂ RR), play key roles in various sustainable energy storage and production devices and their optimization in an ecological manner is of paramount importance for mankind. In this inclusive Review, we aspire to set the scene on doped carbon-based nanomaterials and their hybrids as precious-metal alternative electrocatalysts for these critical reactions in order for the research community not only to stay up-to-date, but also to get inspired and keep pushing forward towards their practical application in energy conversion.

An Efficient Bifunctional Electrocatalyst of Phosphorous Carbon Co-doped MOFs

It is eager to develop high-performance and cheap bifunctional electrochemical catalysts for both of the oxygen reduction reaction (ORR) or oxygen evolution reaction (OER) for the energy crisis and environmental problems. Herein, we report a series of ZIF-derived Co-P-C co-doped polyhedral materials with a well-defined morphology. The optimized catalyst Co/P/MOFs-CNTs-700 exhibited favorable electrochemical activities with the lowest overpotential of 420 mV to achieve the current density of 10 mA cm^-2 for OER and the half potential of 0.8 V for ORR in 0.1 M NaOH. The performance can be well improved by doping phosphorous resource which greatly changed its morphology. Meanwhile, the doped carbon resources also improve the conductivity, which makes it a promising bifunctional electrochemical catalyst and can be comparable with the commercial electrocatalysts.

In-MOF-derived ultrathin heteroatom-doped carbon nanosheets for improving oxygen reduction

For electrocatalysis, the development of highly active and low-cost stable electrocatalysts, which would be directly applied in cathodes for fuel cells that are regarded as the most promising candidates for clean energy conversion in the quest for alternatives to conventional fossil fuel technology, remains a massive challenge. In this context, oxygen reduction reaction (ORR) is a critical process under intense research for the direct conversion of chemical energy into electricity. Herein, a facile synthetic method is proposed for the preparation of hierarchically porous 2-dimensional nanosheets consisting of Fe4C and FeCo nanoparticles incorporated in N/S-doped carbon materials at 900 °C, denoted as InFeCo@CNS900. This composite can be conveniently prepared by directly calcining the crystalline indium-organic framework of InOF-24, which is impregnated with the ferric thiocyanate and cobalt ammonium complexes under Ar atmosphere, in which Fe4C and FeCo nanoparticles were in situ formed and embedded into the well-developed carbon materials, which display the hierarchically porous nanosheets with microporous and mesoporous structures. Due to the synergistic effects between different active substances, high specific surface area, suitable graphitization degree, and rich active sites, the as-obtained InFeCo@CNS900 electrocatalyst exhibits an excellent ORR activity, which shows a lower Tafel slope of 59.5 mV dec-1, higher diffusion limit current of 5.15 mA cm-2, and better stability than the commercial 20 wt% Pt/C catalyst. This study provides a facile approach for the design and synthesis of highly efficient non-noble metal-doped carbon materials with a unique 2-dimensional morphology, which are potentially applied in energy science and technology.

Cobalt-Based Multicomponent Oxygen Reduction Reaction Electrocatalysts Generated by Melamine Thermal Pyrolysis with High Performance in an Alkaline Hydrogen/Oxygen Microfuel Cell

A series of cobalt-based multicomponent electrocatalysts (Co-Cat-T) for the oxygen reduction reaction (ORR) were synthesized by thermal pyrolysis of activated carbon-supported cobalt and melamine mixture from 500 to 800 °C. Their corresponding electrocatalytic performance was systematically investigated toward ORR in an alkaline electrolyte. The electrocatalyst chemical composition and structure evolution (e.g., microstrain, crystallite size, and cell volume) were confirmed by X-ray diffraction Rietveld analyses. The material generated at 550 °C (Co-Cat-T550) showed the largest cell volume of the C₃N₄ phase with a crystallite size of 4.1 ± 0.1 nm. Independent of the heat-treatment temperature, the cobalt atom was coordinated to nitrogen moieties. The following findings: cobalt inserted in the carbon nitride framework (Co-g-C₃N₄), abundant Co-N_x and pyridinic-N species, unique encapsulated cross-tubular structure, and disordered carbon domains performed better in the ORR with Co-Cat-T550 among the obtained electrocatalysts. In addition, Co-Cat-T550 showed performance comparable to Pt/C in an alkaline hydrogen/oxygen microfuel cell platform.

Cobalt decorated nitrogen-doped carbon bowls as efficient electrocatalysts for the oxygen reduction reaction

Cobalt decorated nitrogen-doped carbon bowls (Co@NCB) demonstrate better ORR performance than Pt/C in terms of half-wave potential and stability.

Cu,N-Codoped Carbon Nanodisks with Biomimic Stomata-Like Interconnected Hierarchical Porous Topology as Efficient Electrocatalyst for Oxygen Reduction Reaction

Metal,N-codoped carbon (M-N-C) nanostructures are promising electrocatalysts toward oxygen reduction reaction (ORR) or other gas-involved energy electrocatalysis. Further creating pores into M-N-C nanostructures can increase their surface area, fully expose the active sites, and improve mass transfer and electrocatalytic efficiency. Nonetheless, it remains a challenge to fabricate M-N-C nanomaterials with both well-defined morphology and hierarchical porous structures. Herein, high-quality 2D Cu-N-C nanodisks (NDs) with biomimic stomata-like interconnected hierarchical porous topology are synthesized via carbonization of Cu-tetrapyridylporphyrin (TPyP)-metal-organic frameworks (MOFs) precursors and followed by etching the carbonization product (Cu@Cu-N-C) along with re-annealing treatment. Such hierarchical porous Cu-N-C NDs possess high specific surface area (293 m² g^-1 ) and more exposed Cu single-atom sites, different from their counterparts (Cu@Cu-N-C) and pure N-C control catalysts. Electrochemical tests in alkaline media reveal that they can efficiently catalyze ORR with a half-wave potential of 0.85 V (vs reversible hydrogen electrode), comparable to Pt/C and outperforming Cu@Cu-N-C, N-C, Cu-TPyP-MOFs, and most other reported M-N-C catalysts. Moreover, their stability and methanol-tolerant capability exceed Pt/C. This work may shed some light on optimizing 2D M-N-C nanostructures through bio-inspired pore structure engineering, and accelerate their applications in fuel cells, artificial photosynthesis, or other advanced technological fields.

A Confined Replacement Synthesis of Bismuth Nanodots in MOF Derived Carbon Arrays as Binder-Free Anodes for Sodium-Ion Batteries

The inferior tolerance with reversible accommodation of large-sized Na+ ion in electrode materials has plagued the adaptability of sodium-ion chemistry. The sluggish diffusion kinetics of Na+ also baffles the desirability. Herein, a carbon fiber supported binder-free electrode consisting of bismuth and carbon composite is designed. Well-confined bismuth nanodots are synthesized by replacing cobalt in the metal-organic frameworks (MOF)-derived, nitrogen-doped carbon arrays, which are demonstrated with remarkable reversibility during sodiation and desodiation. Cobalt species in the pristine MOF catalyze the graphitization around organic components in calcination, generating a highly conductive network in which the bismuth is to be embedded. The uniformly dispersed bismuth nanodots provide plenty boundaries and abundant active sites in the carbon arrays, where fast sodium storage kinetics are realized to contribute extra capacity and excellent rate performance.

A Comprehensive Investigation on Pyrolyzed Fe-N-C Composites as Highly Efficient Electrocatalyst toward the Oxygen Reduction Reaction of PEMFCs

There remain great challenges in exploring cost-effective and highly efficient non-noble metal electrocatalysts to catalyze the oxygen reduction reaction (ORR) of proton exchange membrane fuel cells (PEMFCs). Also, a further validation on their performances under a fuel cell operating condition draws sustained attention. Herein, we report a comprehensive investigation on the ORR performances of a series of pyrolyzed Fe-N-C composites that use phenanthrolene as the nitrogen precursor, and the effects of carbon supports, transition metal precursors, and annealing temperatures are examined in detail. Electrochemical measurements combined with different physicochemical characterizations are employed to clarify the function of critical structures including the specific surface area, microstructure, nitrogen content, nitrogen type, and corresponding proportion on their ORR and fuel cell performances. It demonstrates a half-wave potential of 0.79 V and almost a four-electron pathway. When using the as-optimized Fe-N-C composite as the cathode catalyst of a PEMFC, the maximum power density reaches as high as 540 mW cm^-2.

Cobalt-Tannin-Framework-Derived Amorphous Co-P/Co-N-C on N, P Co-Doped Porous Carbon with Abundant Active Moieties for Efficient Oxygen Reactions and Water Splitting

It remains a tremendous challenge to develop a low-cost, earth-abundant, and efficient catalyst with multifunctional activities for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). Herein, a facile and scalable avenue was developed to prepare amorphous Co-P/Co-N-C supported on N, P co-doped porous carbon (Co-P/Co-N-C/NPC) with a large specific surface area (1462.9 m²  g^-1 ) and abundant reactive sites including Co-P, Co-N and NPC. The prepared electrocatalyst exhibits outstanding catalytic performance for HER (η=234 mV at 10 mA cm^-2 ), OER (η=374 mV at 10 mA cm^-2 ), and ORR (E_1/2 =0.89 V, vs. reversible hydrogen electrode). Benefiting from the excellent HER performance and outstanding OER activity, the Co-P/Co-N-C/NPC delivers a current density of 10 mA cm^-2 for overall water splitting at a cell voltage of 1.59 V, which is comparable with the IrO₂ -Pt/C couple electrode.

Applications of Metal-Organic-Framework-Derived Carbon Materials

Carbon materials derived from metal-organic frameworks (MOFs) have attracted much attention in the field of scientific research in recent years because of their advantages of excellent electron conductivity, high porosity, and diverse applications. Tremendous efforts are devoted to improving their chemical and physical properties, including optimizing the morphology and structure of the carbon materials, compositing them with other materials, and so on. Here, many kinds of carbon materials derived from metal-organic frameworks are introduced with a particular focus on their promising applications in batteries (lithium-ion batteries, lithium-sulfur batteries, and sodium-ion batteries), supercapacitors (metal oxide/carbon and metal sulfide/carbon), electrocatalytic reactions (oxygen reduction reaction, oxygen evolution reaction, and hydrogen evolution reaction), water treatment (MOF-derived carbon and other techniques), and other possible fields. To close, some existing problem and corresponding possible solutions are proposed based on academic knowledge from the reported literature, along with a great deal of experimental experience.

Porous N-Doped Carbon-Encapsulated CoNi Alloy Nanoparticles Derived from MOFs as Efficient Bifunctional Oxygen Electrocatalysts

A porous N-doped carbon-encapsulated CoNi alloy nanoparticle composite (CoNi@N-C) was prepared using a bimetallic metal-organic framework composite as the precursor. The optimal prepared Co₁Ni₁@N-C material at 800 °C exhibited well-defined porosities, uniform CoNi alloy nanoparticle dispersion, a high doped-N level, and scattered CoNi-N _x active sites, therefore affording excellent oxygen catalytic activities toward the reduction and evolution processes of oxygen. The oxygen reduction (ORR) onset potential ( E_onset) on Co₁Ni₁@N-C was 0.91 V and the half-wave potential ( E_1/2) was 0.82 V, very close to the parameters recorded on the Pt/C (20 wt Pt%) benchmark. Moreover, it is worth noting that the ORR stability of Co₁Ni₁@N-C was prominently higher than that of Pt/C. Under the oxygen evolution reaction condition, Co₁Ni₁@N-C generated the maximum current density at the potential of 1.7 V (8.60 mA cm^-2) and the earliest E_onset (1.35 V) among all Co _xNi _y@N-C hybrids. The Co₁Ni₁@N-C catalyst exhibited the smallest Δ E value, confirming the superior bifunctional activity. The high surface area and porosity, and CoNi-N _x active sites on the carbon surface including the proper interactions between the N-doped C shell and CoNi nanoparticles were attributed as the main contributors to the outstanding oxygen electrocatalytic property and good stability.

A cobalt metal–organic framework (Co-MOF): a bi-functional electro active material for the oxygen evolution and reduction reaction

Co-MOF catalyzes the ORR efficiently with a lower onset potential (0.85 V vs. RHE) by a four electron reduction path with better durability. It needs only 280 mV overpotential to deliver the state-of-art current density of 10 mA cm⁻².

Recent Advances of Cobalt-Based Electrocatalysts for Oxygen Electrode Reactions and Hydrogen Evolution Reaction

This review summarizes recent progress in the development of cobalt-based catalytic centers as the most potentially useful alternatives to noble metal-based electrocatalysts (Pt-, Ir-, and Ru-based) towards the oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in acid and alkaline media. A series of cobalt-based high-performance electrocatalysts have been designed and synthesized including cobalt oxides/chalcogenides, Co–Nx/C, Co-layered double hydroxides (LDH), and Co–metal-organic frameworks (MOFs). The strategies of controllable synthesis, the structural properties, ligand effect, defects, oxygen vacancies, and support materials are thoroughly discussed as a function of the electrocatalytic performance of cobalt-based electrocatalysts. Finally, prospects for the design of novel, efficient cobalt-based materials, for large-scale application and opportunities, are encouraged.

Six Isomorphous Window-Beam MOFs: Explore the Effects of Metal Ions on MOF-Derived Carbon for Supercapacitors

Six isomorphous metal-organic frameworks (MOFs) with a 3D window-beam architecture have been synthesized from solvothermal reactions, and are named Zn, Cd, Ni, Co, Mn and Cu-MOF, respectively. The series of MOFs was utilized as precursors to synthesize MOF-derived carbon with different morphologies. Zn and Cd-MOFs lead to the derivation of porous carbons (PCs), which exhibit remarkable BET specific surface areas. For derivates of Ni, Co and Mn-MOFs, graphitized carbons (GCs) show some carbon graphitization, but their BET specific surface areas are relatively small. C-Cu has the smallest BET specific surface area, and there is no carbon graphitization. Therefore, the metal ion of the parent MOF exerts a crucial effect on the preparation of MOF-derived carbon, such as the pore-forming effect of Zn and Cd species, and catalytic graphitization of Ni, Co, and Mn species. The capacitances of MOF-derived carbon follow the sequence of PCs>GCs>C-Cu, which reveals that the specific surface area plays a dominant role in the capacitive performance of electrical double layer capacitors (EDLCs), and that the graphitization could improve the capacitance. Significantly, PC-Zn exhibits the best specific capacitance (138 F g^-1 at 0.5 Ag^-1 ), and excellent life cycle, which can be applied as an electrode material in supercapacitors.

Highly Dispersed Co-B/N Codoped Carbon Nanospheres on Graphene for Synergistic Effects as Bifunctional Oxygen Electrocatalysts

Oxygen reduction and evolution reactions as two important electrochemical energy conversion processes in metal-air battery devices have aroused widespread concern. However, synthesis of low-cost non-noble metal-based bifunctional high-performance electrocatalysts is still a great challenge. In this work, we report on the design and synthesis of a novel Co-B/N codoped carbon with core-shell-structured nanoparticles aligned on graphene nanosheets (denoted as CoTIB-C/G) derived from cobalt tetrakis(1-imidazolyl)borate (CoTIB) and graphene oxide hybrid template. Compared with pristine CoTIB-derived bulk structure (CoTIB-C), CoTIB-C/G particles with an average size of 25 nm are uniformly dispersed on highly conductive graphene sheets in the hybrid material, thus dramatically increasing the utilization efficiency and activity of the active components upon oxygen reduction and evolution. After all, because of the "barrier effect" of graphene sheets toward CoTIB-C/G and the synergistic effect between Co nanoparticles and carbon shells linked to the graphene sheets, as well as heteroatoms' doping effect, the as-obtained bifunctional electrocatalyst exhibits remarkable oxygen reduction and evolution reaction activities in alkaline media, indicating its feasibility and potential in practical applications.

Metal Organic Framework Derived Materials: Progress and Prospects for the Energy Conversion and Storage

Exploring new materials with high efficiency and durability is the major requirement in the field of sustainable energy conversion and storage systems. Numerous techniques have been developed in last three decades to enhance the efficiency of the catalyst systems, control over the composition, structure, surface area, pore size, and moreover morphology of the particles. In this respect, metal organic framework (MOF) derived catalysts are emerged as the finest materials with tunable properties and activities for the energy conversion and storage. Recently, several nano- or microstructures of metal oxides, chalcogenides, phosphides, nitrides, carbides, alloys, carbon materials, or their hybrids are explored for the electrochemical energy conversion like oxygen evolution, hydrogen evolution, oxygen reduction, or battery materials. Interest on the efficient energy storage system is also growing looking at the practical applications. Though, several reviews are available on the synthesis and application of MOF and MOF derived materials, their applications for the electrochemical energy conversion and storage is totally a new field of research and developed recently. This review focuses on the systematic design of the materials from MOF and control over their inherent properties to enhance the electrochemical performances.

Stable and Efficient Nitrogen-Containing Carbon-Based Electrocatalysts for Reactions in Energy-Conversion Systems

High activity and stability are crucial for the practical use of electrocatalysts in fuel cells, metal-air batteries, and water electrolysis, including the oxygen reduction reaction, hydrogen evolution reaction, oxygen evolution reaction, and oxidation reactions of formic acid and alcohols. Electrocatalysts based on nitrogen-containing carbon (N-C) materials show promise in catalyzing these reactions; however, there is no systematic review of strategies for the engineering of active and stable N-C-based electrocatalysts. Herein, a comprehensive comparison of recently reported N-C-based electrocatalysts regarding both electrocatalytic activity and long-term stability is presented. In the first part of this review, the relationships between the electrocatalytic reactions and selection of the element to modify the N-C-based materials are discussed. Afterwards, synthesis methods for N-C-based electrocatalysts are summarized, and strategies for the synthesis of highly stable N-C-based electrocatalysts are presented. Multiple tables containing data on crucial parameters for both electrocatalytic activity and stability are displayed in this review. Finally, constructing M-N_x moieties is proposed as the most promising engineering strategy for stable N-C-based electrocatalysts.

Recent Progress on MOF-Derived Heteroatom-Doped Carbon-Based Electrocatalysts for Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is the core reaction of numerous sustainable energy-conversion technologies such as fuel cells and metal-air batteries. It is crucial to develop a cost-effective, highly active, and durable electrocatalysts for ORR to overcome the sluggish kinetics of four electrons pathway. In recent years, the carbon-based electrocatalysts derived from metal-organic frameworks (MOFs) have attracted tremendous attention and have been shown to exhibit superior catalytic activity and excellent intrinsic properties such as large surface area, large pore volume, uniform pore distribution, and tunable chemical structure. Here in this review, the development of MOF-derived heteroatom-doped carbon-based electrocatalysts, including non-metal (such as N, S, B, and P) and metal (such as Fe and Co) doped carbon materials, is summarized. It furthermore, it is demonstrated that the enhancement of ORR performance is associated with favorably well-designed porous structure, large surface area, and high-tensity active sites. Finally, the future perspectives of carbon-based electrocatalysts for ORR are provided with an emphasis on the development of a clear mechanism of MOF-derived non-metal-doped electrocatalysts and certain metal-doped electrocatalysts.

Novel MOF-Derived Co@N-C Bifunctional Catalysts for Highly Efficient Zn-Air Batteries and Water Splitting

Metal-organic frameworks (MOFs) and MOF-derived materials have recently attracted considerable interest as alternatives to noble-metal electrocatalysts. Herein, the rational design and synthesis of a new class of Co@N-C materials (C-MOF-C2-T) from a pair of enantiotopic chiral 3D MOFs by pyrolysis at temperature T is reported. The newly developed C-MOF-C2-900 with a unique 3D hierarchical rodlike structure, consisting of homogeneously distributed cobalt nanoparticles encapsulated by partially graphitized N-doped carbon rings along the rod length, exhibits higher electrocatalytic activities for oxygen reduction and oxygen evolution reactions (ORR and OER) than that of commercial Pt/C and RuO₂ , respectively. Primary Zn-air batteries based on C-MOF-900 for the oxygen reduction reaction (ORR) operated at a discharge potential of 1.30 V with a specific capacity of 741 mA h g_Zn^-1 under 10 mA cm^-2 . Rechargeable Zn-air batteries based on C-MOF-C2-900 as an ORR and OER bifunctional catalyst exhibit initial charge and discharge potentials at 1.81 and 1.28 V (2 mA cm^-2 ), along with an excellent cycling stability with no increase in polarization even after 120 h - outperform their counterparts based on noble-metal-based air electrodes. The resultant rechargeable Zn-air batteries are used to efficiently power electrochemical water-splitting systems, demonstrating promising potential as integrated green energy systems for practical applications.