Efficient Removal of Anionic Radioactive Pollutant from Water Using Ordered Urea-Functionalized Mesoporous Polymeric Nanoparticle

Superiority of the Supramolecular Halogen Bond Receptor over Its H-Bond Analogue toward the Efficient Extraction of Perrhenate from Water

A halogen bond-based water-soluble tetrapodal iodoimidazolium receptor, (L-I)(4Br), exhibited a high degree of efficiency (∼96%) in extracting ReO₄^- from 100% aqueous medium within a wide range of concentrations and of pH values along with excellent reusability. The solid-state X-ray diffraction study showed the trapping of ReO₄^- by (L-I)(4Br) via the Re-O····I halogen bonding interaction. XPS studies also suggested the interaction between I and ReO₄^- through polarization of the electron density of I atoms by ReO₄^-. (L-I)(4Br) is found to be capable of retaining its high extraction efficiency in the presence of competing anions such as F^-, Cl^-, I^-, SO₄^2-, H₂PO₄^-, CO₃^2-, NO₃^-, BF₄^-, ClO₄^-, Cr₂O₇^2-, and a mixture of these anions. Interestingly, (L-I)(4Br) was found to be superior in ReO₄^- extraction as compared to its hydrogen-bond donor analogue, (L-H)(4Br), as confirmed by a series of control experiments and theoretical calculations. Our synthesized dipodal and tripodal halogen bond donor receptors and their H-analogues validated the superiority of these classes of supramolecular halogen bond donor receptors over their hydrogen-bond analogues. (L-I)(4Br) also showed superior practical applicability in terms of the removal of ReO₄^- at anion concentrations as low as ∼100 ppm, which was a major shortcoming of (L-H)(4Br).

Efficient collection of perrhenate anions from water using poly(pyridinium salts) via pyrylium mediated transformation

Poly(pyridinium salts) composed of cationic pyridinium groups with benzene-rich motifs demonstrated high efficiency and selectivity in the capture of ReO4− from SO42− containing water.

A review on water treatment technologies for the management of oxoanions: prospects and challenges

Oxoanions are a class of contaminants that are easily released into the aquatic systems either through natural or anthropogenic activities. Depending on their oxidation states, they are highly mobile, resulting in the contamination of underground water. Above the permissible level in groundwater, they pose as threats to mammals when the contaminated water is consumed. Some of the health challenges caused are cancer, neurological, cardiac, gastrointestinal, and skin disorders. Several treatment technologies have been adopted over the years for the management of these oxoanions present in the aquatic systems. However interesting these treatment technologies might be, they also have their limitations such as cost-effectiveness, the complexity of the process, and generation of secondary pollutants. This work focused on some of the water treatment technologies applied for the removal of oxoanions. Some of the advantages and disadvantages of these treatment technologies are also highlighted. Amongst all the treatment technologies, adsorption is the most applied method for the removal of oxoanions. However, photocatalysis has a higher prospect since it is non-selective and secondary pollutants are not generated after the treatment process. Also, photocatalysis can simultaneously reduce and oxidise oxoanions as well as organic pollutants respectively.

Synthesis and Selective Au(III) Adsorption of Ureido Polymers Containing Large Repeating Rings

Two polymers (polyBAUEE and polyBAUP) containing 25- and 20-membered rings are synthesized by the cyclopolymerization of bifunctional monomers 1,2-bis(acryloyloxyethyl-ureidoethoxyl)-ethane (BAUEE) and 1,3-bis(acryloyloxyethylureido)propane (BAUP) and studied for the adsorption of precious metal ions. PolyBAUEE and polyBAUP selectively adsorb Au(III) with the adsorption efficiencies above 99.0% after adsorption equilibrium. PolyBAUEE adsorbed faster than polyBAUP, and the Au(III) adsorption is selective in the presence of nine interfering metal ions with similar concentrations (ca. 1 mg/L) in an aqueous solution including Pd(II) and Pt(II). The maximum Au(III) adsorption capacities of polyBAUEE and polyBAUP are 37.6 and 31.8 mg/g, respectively. Au(III) is reduced to Au(0) nanoparticles during the adsorption process. The selective adsorption behavior depends on the controlling regioselective recognition of the ring structure and the ureido groups.

Evaluation of an Ionic Porous Organic Polymer for Water Remediation

The targeted synthesis of a novel ionic porous organic polymer (iPOP) was reported. The compound (denoted as QUST-iPOP-1) was built up through a quaternization reaction of tris(4-imidazolylphenyl)amine and cyanuric chloride, and then benzyl bromide was added to complete the quaternization of the total imidazolyl units. It featured a special exchangeable Cl^-/Br^--rich structure with high permanent porosity and wide pore size distribution, enabling it to rapidly and effectively remove environmentally toxic oxo-anions including Cr₂O₇^2-, MnO₄^-, and ReO₄^- and anionic organic dyes with different sizes including methyl blue, Congo red, and methyl orange from water. Notably, QUST-iPOP-1 showed ultra-high capacity values for radioactive TcO₄^- surrogate anions (MnO₄^- and ReO₄^-), Cr₂O₇^2-, methyl blue, and Congo red, and these were comparable to some reported compounds of exhaustive research. Furthermore, the relative removal rate was high even when other concurrent anions existed.

3D Cationic Polymeric Network Nanotrap for Efficient Collection of Perrhenate Anion from Wastewater

Rhenium is one of the most valuable elements found in nature, and its capture and recycle are highly desirable for resource recovery. However, the effective and efficient collection of this material from industrial waste remains quite challenging. Herein, a tetraphenylmethane-based cationic polymeric network (CPN-tpm) nanotrap is designed, synthesized, and evaluated for ReO₄^- recovery. 3D building units are used to construct imidazolium salt-based polymers with positive charges, which yields a record maximum uptake capacity of 1133 mg g^-1 for ReO₄^- collection as well as fast kinetics ReO₄^- uptake. The sorption equilibrium is reached within 20 min and a k_d value of 8.5 × 10⁵ mL g^-1 is obtained. The sorption capacity of CPN-tpm remains stable over a wide range of pH values and the removal efficiency exceeds 60% for pH levels below 2. Moreover, CPN-tpm exhibits good recyclability for at least five cycles of the sorption-desorption process. This work provides a new route for constructing a kind of new high-performance polymeric material for rhenium recovery and rhenium-contained industrial wastewater treatment.

Sustainable method towards magnetic ordered mesoporous polymers for efficient Methylene Blue removal

The difficulty in achieving high removal efficiency for contaminants in textile wastewater over a wide range of pH impedes the progress of its treatment technique greatly. Herein, a facile and sustainable strategy was adopted for constructing magnetic ordered mesoporous polymers (M-OMPs) without the assistance of organic solvent and catalyst. The prepared M-OMPs were endowed with high special surface area and good superparamagnetism simultaneously, and exhibited high removal efficiency (>99%) for Methylene Blue (MB) within a short time (10 min) at a concentration of 50 mg/L. What's more, high removal efficiency was achieved over a wide range of pH 2-12 and the adsorption capacity for MB on M-OMPs was substantially retained even after 5 adsorption-desorption cycles, further demonstrating the application potential of M-OMPs in the decontamination of textile wastewater.

Applications of solid-state NMR spectroscopy in environmental science

Environmental science is an interdisciplinary field, which integrates chemical, physical, and biological sciences to study environmental problems and human impact on the environment. This article highlights the use of solid-state NMR spectroscopy (SSNMR) in studies of environmental processes and remediation with examples from both laboratory studies and samples collected in the field. The contemporary topics presented include soil chemistry, environmental remediation (e.g., heavy metals and radionuclides removal, carbon dioxide mineralization), and phosphorus recovery. SSNMR is a powerful technique, which provides atomic-level information about speciation in complex environmental samples as well as the interactions between pollutants and minerals/organic matter on different environmental interfaces. The challenges in the application of SSNMR in environmental science (e.g., measurement of paramagnetic nuclei and low-gamma nuclei) are also discussed, and perspectives are provided for the future research efforts.

Anion-exchanged and quaternary ammonium functionalized MIL-101-Cr metal-organic framework (MOF) for ReO4-/TcO4- sequestration from groundwater

There are few effective technologies for the sequestration of highly water-soluble pertechnetate (TcO₄^-) from contaminated water despite the urgency of environmental and public health concerns. In this work, anion exchanged and cetyltrimethylammonium bromide (CTAB) functionalized MIL-101-Cr-NO₃ were investigated for perrhenate (ReO₄^-), a surrogate of TcO₄^-, sequestration from artificial groundwater. Cl^-, I^-, and CF₃SO₃^- exchanged MIL-101-Cr proved more effective at ReO₄^- removal than the parent MIL-101-Cr-F. Compared to the parent framework, CTAB functionalized MIL-101-Cr-NO₃ increased ReO₄^- removal capacity from 39 to 139 mg/g, improved the reaction kinetics from ~30 to <10 min to reach full adsorption capacity and the selectivity for ReO₄^- over competing NO₃^-, CO₃^2-, SO₄^2-, and Cl^-. Spectroscopic data indicated that the chemical speciation of Re in the exchanged MIL-101-Cr remained ReO₄^-, indicating synergistic sequestration through both anion exchange and non-ion exchange binding with the positively charged ligand of CTAB. These studies foreshadow potential applications of MOFs for the remediation of ⁹⁹TcO₄^- from contaminated environments.

Porous Organic Polymers with Thiourea Linkages (POP-TUs): Effective and Recyclable Organocatalysts for the Michael Reaction

As novel porous organic polymers with thiourea linkages, POP-TUs were successfully synthesized with tris(4-aminophenyl) amine (TAA) and 1,4-phenylene diisothiocyanate (PDT) under different conditions. The as-synthesized POP-TUs possess distinctly different morphological characteristics and can effectively catalyze the Michael reaction of trans-β-nitrostyrenes to diethyl malonate. Particularly, the POP-TU-2-catalyzed Michael reaction can proceed smoothly even using an ultralow catalyst dosage of 0.03 mol %, whose turnover number (TON) and turnover frequency (TOF) can reach up to 2700 and 25 h^-1, respectively. Besides, POP-TU-2 also exhibits excellent recyclability and reusability. Only 2% decline in the isolated yield was found after five consecutive runs. This work shows a significant improvement over previously reported thiourea-based catalysts and can offer an effective strategy for developing highly efficient heterogeneous organocatalysts.

Synthesis of ZnO nanoparticle-anchored biochar composites for the selective removal of perrhenate, a surrogate for pertechnetate, from radioactive effluents

Pertechnetate (TcO₄-) is a component of low-activity waste (LAW) fractions of legacy nuclear waste, and the adsorption removal of TcO₄- from LAW effluents would greatly benefit the site remediation process. However, available adsorbent materials lack the desired combination of low cost, radiolytic stability, and high selectivity. In this study, a ZnO nanoparticle-anchored biochar composite (ZBC) was fabricated and applied to potentially separate TcO₄- from radioactive effluents. The as-synthesized material exhibited γ radiation resistance and superhydrophobicity, with a strong sorption capacity of 25,916 mg/kg for perrhenate (ReO₄-), which was used in this study as a surrogate for radioactive pertechnetate (TcO₄-). Additionally, the selectivity for ReO₄- exceeded that for the competing ions I-, NO₂-, NO₃-, SO₄^2-, PO₄^3-, Cu²⁺, Fe³⁺, Al³⁺, and UO₂²⁺. These unique features show that ZBC is capable of selectively removing ReO₄- from Hanford LAW melter off-gas scrubber simulant effluent. This selectivity stems from the synergistic effects of both the superhydrophobic surface of the sorbent and the inherent nature of sorbates. Furthermore, density functional theory (DFT) calculations indicated that ReO₄- can form stable complexes on both the (100) and (002) planes of ZnO, of which, the (002) complexes have greater stability. Electron transfer from ReO₄- on (002) was greater than that on (100). These phenomena may be because (002) has a lower surface energy than (100). Partial density of state (PDOS) analysis further confirms that ReO₄- is chemisorbed on ZBC, which agrees with the findings of the Elovich kinetic model. This work provides a feasible pathway for scale-up to produce high-efficiency and cost-effective biosorbents for the removal of radionuclides.

Evaluation of an Imidazolium-Based Porous Organic Polymer as Radioactive Waste Scavenger

⁹⁹TcO₄^- is highly radioactive and hazardous to both the environment and public health, meanwhile, it is quite challenging to have it efficiently removed. Herein an imidazolium-based cationic porous polymer (ImPOP-1) is evaluated for removal of TcO₄^-, with nonradioactive ReO₄^- as the surrogate for experimental operation. It is demonstrated that ImPOP-1 is a rare example that can integrate high adsorption capacity (610 mg g^-1), fast kinetics (93.3% in 30 s), and high selectivity (72.9% in 1000 times excess of SO₄^2- ions) in one material. The distribution coefficient K_d is among the top up to 3.2 × 10⁵ mL g^-1. ImPOP-1 also displays high adsorption performance over a wide range of pH values, and removal efficiency up to 64.3% in a highly alkaline solution (3 M NaOH). Recyclability experiments demonstrate that ImPOP-1 can be reused at least four times. The ImPOP-1 also retains a consistent adsorption capacity up to 609 ± 6.1 mg g^-1 between three different batches of samples. In addition, a real-scenario experiment shows that ImPOP-1 can remove 97.4% of ReO₄^- in a simulated Hanford LAW stream.

Two-Dimensional Cationic Networks and Their Spherical Curvature with Tunable Opening-Closing

Despite many cationic nanomaterials that have been developed for efficient adsorption of anionic pollutants, tailoring a stable shape with denser cations on the surface for advanced removal capability remains challenging. Here, a new strategy is presented for fabricating two-dimensional (2D) cationic laminas and their curvature based on cross-linking of 2D supramolecular networks from hydrogen-bonded trimesic amide derivatives. Owing to the distribution of most cations on the surface, two cationic nanostructures from cross-linking of supramolecular networks show fast sorption kinetics for anionic pollutants. Notably, the removal capacity of the capsule-like curvature adsorbent is more than twice that of lamina  adsorbent for sufficient space around cationic sites in hollow aperture. Moreover, the capsule-like adsorbent is triggered to open and spontaneously release the adsorbed pollutants upon the addition of halogen anions, which can be recovered by subsequent dialysis. Strategy of a capsule-like pocket with tunable opening-closing will provide a new insight for storage and adsorption.

Surfactant Pyrolysis-Guided in Situ Fabrication of Primary Amine-Rich Ordered Mesoporous Phenolic Resin Displaying Efficient Heavy Metal Removal

A unique strategy for the direct preparation of primary amine-functionalized ordered mesoporous phenolic resin (NH₂-MPRN) was presented. The essence of our approach avoided the side reactions in the m-nitrophenol-formaldehyde resol synthesis using m-nitrophenol and formaldehyde as the monomers. Importantly, these resols can efficiently assemble with triblock copolymer F127 to form a mesostructured composite. The final prolysis treatment removed the F127 template to produce ordered mesopores, and meanwhile, the accompanying reductive gas in situ transferred the nitro groups to primary amines. Notably, the obtained NH₂-MPRN material delivered fast toxic hexavalent chromium sorption kinetics with high uptake capacity and selectivity due to a mesoporous structure, high amine availability, and a hydrophobic surface. Interestingly, almost all of adsorbed chromium species existed as low-toxic trivalent chromium in the resin owing to the cooperative detoxification process by the neighboring primary amines and phenolic hydroxyl groups. Also, it showed the reversible detoxification for at least five times.

Effective Removal of Anionic Re(VII) by Surface-Modified Ti2CT x MXene Nanocomposites: Implications for Tc(VII) Sequestration

Environmental contamination by ⁹⁹Tc(VII) from radioactive wastewater streams is of particular concern due to the long half-life of ⁹⁹Tc and high mobility of pertechnetate. Herein, we report a novel MXene-polyelectrolyte nanocomposite with three-dimensional networks for enhanced removal of perrhenate, which is pertechnetate simulant. The introduction of poly(diallyldimethylammonium chloride) (PDDA) regulates the surface charge and improves the stability of Ti₂CT _x nanosheet, resulting in Re(VII) removal capacity of up to 363 mg g^-1, and fast sorption kinetics. The Ti₂CT _x/PDDA nanocomposite furthermore exhibits good selectivity for ReO₄^- when competing anions (such as Cl^- and SO₄^2-) coexist at a concentration of 1800 times. The immobilization mechanism was confirmed as a sorption-reduction process by batch sorption experiments and X-ray photoelectron spectroscopy. The pH-dependent reducing activity of Ti₂CT _x/PDDA nanocomposite toward Re(VII) was clarified by X-ray absorption spectroscopy. As the pH increases, the local environment gradually changes from octahedral-coordinated Re(IV) to tetrahedral-coordinated Re(VII). The overall results suggest that Ti₂CT _x/PDDA nanocomposite may be a promising candidate for efficient elimination of Tc contamination. The reported surface modification strategy might result in applications of MXene-based materials in environmental remediation of other oxidized anion pollutants.

Rapid Colorimetric Detection of Cartap Residues by AgNP Sensor with Magnetic Molecularly Imprinted Microspheres as Recognition Elements

The overuse of cartap in tea tree leads to hazardous residues threatening human health. A colorimetric determination was established to detect cartap residues in tea beverages by silver nanoparticles (AgNP) sensor with magnetic molecularly imprinted polymeric microspheres (Fe₃O₄@mSiO₂@MIPs) as recognition elements. Using Fe₃O₄ as supporting core, mesoporous SiO₂ as intermediate shell, methylacrylic acid as functional monomer, and cartap as template, Fe₃O₄@mSiO₂@MIPs were prepared to selectively and magnetically separate cartap from tea solution before colorimetric determination by AgNP sensors. The core-shell Fe₃O₄@mSiO₂@MIPs were also characterized by FT-IR, TEM, VSM, and experimental adsorption. The Fe₃O₄@mSiO₂@MIPs could be rapidly separated by an external magnet in 10 s with good reusability (maintained 95.2% through 10 cycles). The adsorption process of cartap on Fe₃O₄@mSiO₂@MIPs conformed to Langmuir adsorption isotherm with maximum adsorption capacity at 0.257 mmol/g and short equilibrium time of 30 min at 298 K. The AgNP colorimetric method semi-quantified cartap ≥5 mg/L by naked eye and quantified cartap 0.1–5 mg/L with LOD 0.01 mg/L by UV-vis spectroscopy. The AgNP colorimetric detection after pretreatment with Fe₃O₄@mSiO₂@MIPs could be successfully utilized to recognize and detect cartap residues in tea beverages.

Selective Anion Extraction and Recovery Using a FeII4 L4 Cage

Selective anion extraction is useful for the recovery and purification of valuable chemicals, and in the removal of pollutants from the environment. Here we report that Fe^II₄L₄ cage 1 is able to extract an equimolar amount of ReO₄⁻, a high‐value anion and a nonradioactive surrogate of TcO₄⁻, from water into nitromethane. Importantly, the extraction was efficiently performed even in the presence of 10 other common anions in water, highlighting the high selectivity of 1 for ReO₄⁻. The extracted guest could be released into water as the cage disassembled in ethyl acetate, and then 1 could be recycled by switching the solvent to acetonitrile. The versatile solubility of the cage also enabled complete extraction of ReO₄⁻ (as the tetrabutylammonium salt) from an organic phase into water by using the sulfate salt of 1 as the extractant.