La0.8Sr0.2MnO3-Based Perovskite Nanoparticles with the A-Site Deficiency as High Performance Bifunctional Oxygen Catalyst in Alkaline Solution

Research Progress of Perovskite-Based Bifunctional Oxygen Electrocatalyst in Alkaline Conditions

In light of the depletion of conventional energy sources, it is imperative to conduct research and development on sustainable alternative energy sources. Currently, electrochemical energy storage and conversion technologies such as fuel cells and metal-air batteries rely heavily on precious metal catalysts like Pt/C and IrO2, which hinders their sustainable commercial development. Therefore, researchers have devoted significant attention to non-precious metal-based catalysts that exhibit high efficiency, low cost, and environmental friendliness. Among them, perovskite oxides possess low-cost and abundant reserves, as well as flexible oxidation valence states and a multi-defect surface. Due to their advantageous structural characteristics and easily adjustable physicochemical properties, extensive research has been conducted on perovskite-based oxides. However, these materials also exhibit drawbacks such as poor intrinsic activity, limited specific surface area, and relatively low apparent catalytic activity compared to precious metal catalysts. To address these limitations, current research is focused on enhancing the physicochemical properties of perovskite-based oxides. The catalytic activity and stability of perovskite-based oxides in Oxygen Reduction Reaction/Oxygen Evolution Reaction (ORR/OER) can be enhanced using crystallographic structure tuning, cationic regulation, anionic regulation, and nano-processing. Furthermore, extensive research has been conducted on the composite processing of perovskite oxides with other materials, which has demonstrated enhanced catalytic performance. Based on these different ORR/OER modification strategies, the future challenges of perovskite-based bifunctional oxygen electrocatalysts are discussed alongside their development prospects.

Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal-air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O2 to water (H2O) or from O2 to hydrogen peroxide (H2O2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.

Highly efficient electrocatalytic biomass valorization over a perovskite-derived nickel phosphide catalyst

In this work, we successfully develop a binder-free phosphorus-engineered perovskite-based catalyst grown on nickel foam via a hydrothermal-phosphorization strategy. For the first time, an as-synthesized perovskite-based nickel phosphide catalyst exhibits excellent electrocatalytic oxidation (ECO) performance for biomass valorization to supersede the competitive oxygen evolution reaction (OER).

Preparation and bifunctional properties of the A-site-deficient SrTi0.3Fe0.6Ni0.1O3-δ perovskite

The development of efficient, non-noble metal electrocatalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial for their application in energy storage devices, such as fuel cells and metal-air batteries. In this study, SrTi_0.3Fe_0.6Ni_0.1O_3-δ (STFN) perovskite was synthesized using the sol-gel method, and its electrocatalytic activity was evaluated using a rotating disk electrode (RDE) in an alkaline medium. STFN synthesized at the optimum synthesis temperature of 800 °C exhibited good ORR and OER performances. To further improve electrocatalytic activity, a series of Sr_1-x Ti_0.3Fe_0.6Ni_0.1O_3-δ (x = 0, 0.05, and 0.1) perovskites with A-site vacancies were synthesized at 800 °C. Material characterization results showed that the removal of the A-site from the perovskite led to an increase in surface oxygen vacancies, resulting in higher ORR and OER activities. The results of this study indicate that Sr_1-x Ti_0.3Fe_0.6Ni_0.1O_3-δ (x = 0.1) is a promising bifunctional oxygen electrocatalyst for Zn-air batteries.

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

Hydrogen is considered a promising clean energy vector with the features of high energy capacity and zero-carbon emission. Water splitting is an environment-friendly and effective route for producing high-purity hydrogen, which contains two important half-cell reactions, namely, the anodic oxygen evolution reaction (OER) and the cathodic hydrogen evolution reaction (HER). At the heart of water splitting is high-performance electrocatalysts that efficiently improve the rate and selectivity of key chemical reactions. Recently, perovskite oxides have emerged as promising candidates for efficient water splitting electrocatalysts owing to their low cost, high electrochemical stability, and compositional and structural flexibility allowing for the achievement of high intrinsic electrocatalytic activity. In this review, we summarize the present research progress in the design, development, and application of perovskite oxides for electrocatalytic water splitting. The emphasis is on the innovative synthesis strategies and a deeper understanding of structure–activity relationships through a combination of systematic characterization and theoretical research. Finally, the main challenges and prospects for the further development of more efficient electrocatalysts based on perovskite oxides are proposed. It is expected to give guidance for the development of novel non-noble metal catalysts in electrochemical water splitting.

In Situ Modulation of A-Site Vacancies in LaMnO3.15 Perovskite for Surface Lattice Oxygen Activation and Boosted Redox Reactions

Modulation of A-site defects is crucial to the redox reactions on ABO₃ perovskites for both clean air application and electrochemical energy storage. Herein we report a scalable one-pot strategy for in situ regulation of La vacancies (V_La ) in LaMnO_3.15 by simply introducing urea in the traditional citrate process, and further reveal the fundamental relationship between V_La creation and surface lattice oxygen (O_latt ) activation. The underlying mechanism is shortened Mn-O bonds, decreased orbital ordering, promoted MnO₆ bending vibration and weakened Jahn-Teller distortion, ultimately realizing enhanced Mn-3d and O-2p orbital hybridization. The LaMnO_3.15 with optimized V_La exhibits order of magnitude increase in toluene oxidation and ca. 0.05 V versus RHE (reversible hydrogen electrode) increase of half-wave potential in oxygen reduction reaction (ORR). The reported strategy can benefit the development of novel defect-meditated perovskites in both heterocatalysis and electrocatalysis.

Defect engineering of oxide perovskites for catalysis and energy storage: synthesis of chemistry and materials science

Oxide perovskites have emerged as an important class of materials with important applications in many technological areas, particularly thermocatalysis, electrocatalysis, photocatalysis, and energy storage. However, their implementation faces numerous challenges that are familiar to the chemist and materials scientist. The present work surveys the state-of-the-art by integrating these two viewpoints, focusing on the critical role that defect engineering plays in the design, fabrication, modification, and application of these materials. An extensive review of experimental and simulation studies of the synthesis and performance of oxide perovskites and devices containing these materials is coupled with exposition of the fundamental and applied aspects of defect equilibria. The aim of this approach is to elucidate how these issues can be integrated in order to shed light on the interpretation of the data and what trajectories are suggested by them. This critical examination has revealed a number of areas in which the review can provide a greater understanding. These include considerations of (1) the nature and formation of solid solutions, (2) site filling and stoichiometry, (3) the rationale for the design of defective oxide perovskites, and (4) the complex mechanisms of charge compensation and charge transfer. The review concludes with some proposed strategies to address the challenges in the future development of oxide perovskites and their applications.

Activation Strategies of Perovskite-Type Structure for Applications in Oxygen-Related Electrocatalysts

The oxygen-related electrochemical process, including the oxygen evolution reaction and oxygen reduction reaction, is usually a kinetically sluggish reaction and thus dominates the whole efficiency of energy storage and conversion devices. Owing to the dominant role of the oxygen-related electrochemical process in the development of electrochemical energy, an abundance of oxygen-related electrocatalysts is discovered. Among them, perovskite-type materials with flexible crystal and electronic structures have been researched for a long time. However, most perovskite materials still show low intrinsic activity, which highlights the importance of activation strategies for perovskite-type structures to improve their intrinsic activity. In this review, the recent progress of the activation strategies for perovskite-type structures is summarized and their related applications in oxygen-related electrocatalysis reactions, including electrochemistry water splitting, metal-air batteries, and solid oxide fuel cells are discussed. Furthermore, the existing challenges and the future perspectives for the designing of ideal perovskite-type structure catalysts are proposed and discussed.

High-Efficiency of Bi-Functional-Based Perovskite Nanocomposite for Oxygen Evolution and Oxygen Reduction Reaction: An Overview

High efficient, low-cost and environmentally friendly-natured bi-functional-based perovskite electrode catalysts (BFPEC) are receiving increasing attention for oxygen reduction/oxygen evolution reaction (ORR/OER), playing an important role in the electrochemical energy conversion process using fuel cells and rechargeable batteries. Herein, we highlighted the different kinds of synthesis routes, morphological studies and electrode catalysts with A-site and B-site substitution co-substitution, generating oxygen vacancies studies for boosting ORR and OER activities. However, perovskite is a novel type of oxide family, which shows the state-of-art electrocatalytic performances in energy storage device applications. In this review article, we go through different types of BFPECs that have received massive appreciation and various strategies to promote their electrocatalytic activities (ORR/OER). Based on these various properties and their applications of BFPEC for ORR/OER, the general mechanism, catalytic performance and future outlook of these electrode catalysts have also been discussed.

Graphene Nanosheet-Wrapped Mesoporous La0.8Ce0.2Fe0.5Mn0.5O3 Perovskite Oxide Composite for Improved Oxygen Reaction Electro-Kinetics and Li-O2 Battery Application

A novel design and synthesis methodology is the most important consideration in the development of a superior electrocatalyst for improving the kinetics of oxygen electrode reactions, such as the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in Li-O₂ battery application. Herein, we demonstrate a glycine-assisted hydrothermal and probe sonication method for the synthesis of a mesoporous spherical La_0.8Ce_0.2Fe_0.5Mn_0.5O₃ perovskite particle and embedded graphene nanosheet (LCFM(8255)-gly/GNS) composite and evaluate its bifunctional ORR/OER kinetics in Li-O₂ battery application. The physicochemical characterization confirms that the as-formed LCFM(8255)-gly perovskite catalyst has a highly crystalline structure and mesoporous morphology with a large specific surface area. The LCFM(8255)-gly/GNS composite hybrid structure exhibits an improved onset potential and high current density toward ORR/OER in both aqueous and non-aqueous electrolytes. The LCFM(8255)-gly/GNS composite cathode (ca. 8475 mAh g⁻¹) delivers a higher discharge capacity than the La_0.5Ce_0.5Fe_0.5Mn_0.5O₃-gly/GNS cathode (ca. 5796 mAh g⁻¹) in a Li-O₂ battery at a current density of 100 mA g⁻¹. Our results revealed that the composite’s high electrochemical activity comes from the synergism of highly abundant oxygen vacancies and redox-active sites due to the Ce and Fe dopant in LaMnO₃ and the excellent charge transfer characteristics of the graphene materials. The as-developed cathode catalyst performed appreciable cycle stability up to 55 cycles at a limited capacity of 1000 mAh g⁻¹ based on conventional glass fiber separators.

Direct Regulation of Double Cation Defects at the A1A2 Site for a High-Performance Oxygen Evolution Reaction Perovskite Catalyst

Perovskites are one of the efficient catalysts for the oxygen evolution reaction (OER), and they belong to the primary ABO₃ in which the A site and B site are site-substituted, and oxygen vacancies are introduced. Further improvement of these complex perovskites is the next necessary topic for specific applications. Herein, two complex perovskites, La_0.6Sr_0.4Co_0.8Fe_0.2O_3-δ (LSCF) and Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF), are exploited as the examples to demonstrate the double cation defects-introduced method of A1 and A2 to supply superimposed enhancement of the activity and stability. This is based on the fact that the increased content of oxygen vacancies and coordination can balance the oxygen vacancy and B-site element oxidation state. The electrochemical measurements revealed that the optimized A-LSCF10 and A-BSCF10 both exhibit outstanding OER catalytic activity. A small Tafel slope (57 mV dec^-1) and a low overpotential (228 mV at 10 mA cm^-2) for A-LSCF10 (vs 93 mV dec^-1 and 345 mV at 10 mA cm^-2 for A-LSCF0), and a small Tafel slope (65 mV dec^-1) and an overpotential (242 mV at 10 mA cm^-2) for A-BSCF10 (vs 66 mV dec^-1 and 308 mV at 10 mA cm^-2 for A-BSCF0) are determined, as well as good stability for 24 h.

Solid-State Ball-Milling of Co3O4 Nano/Microspheres and Carbon Black Endorsed LaMnO3 Perovskite Catalyst for Bifunctional Oxygen Electrocatalysis

Developing a highly stable and non-precious, low-cost, bifunctional electrocatalyst is essential for energy storage and energy conversion devices due to the increasing demand from the consumers. Therefore, the fabrication of a bifunctional electrocatalyst is an emerging focus for the promotion and dissemination of energy storage/conversion devices. Spinel and perovskite transition metal oxides have been widely explored as efficient bifunctional electrocatalysts to replace the noble metals in fuel cell and metal-air batteries. In this work, we developed a bifunctional catalyst for oxygen reduction and oxygen evolution reaction (ORR/OER) study using the mechanochemical route coupling of cobalt oxide nano/microspheres and carbon black particles incorporated lanthanum manganite perovskite (LaMnO3@C-Co3O4) composite. It was synthesized through a simple and less-time consuming solid-state ball-milling method. The synthesized LaMnO3@C-Co3O4 composite was characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, transmission electron microscopy, Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction spectroscopy, and micro-Raman spectroscopy techniques. The electrocatalysis results showed excellent electrochemical activity towards ORR/OER kinetics using LaMnO3@C-Co3O4 catalyst, as compared with Pt/C, bare LaMnO3@C, and LaMnO3@C-RuO2 catalysts. The observed results suggested that the newly developed LaMnO3@C-Co3O4 electrocatalyst can be used as a potential candidate for air-cathodes in fuel cell and metal-air batteries.

Recent advances of noble-metal-free bifunctional oxygen reduction and evolution electrocatalysts

Bifunctional oxygen reduction and evolution constitute the core processes for sustainable energy storage. The advances on noble-metal-free bifunctional oxygen electrocatalysts are reviewed.

Atomic-Level Manipulations in Oxides and Alloys for Electrocatalysis of Oxygen Evolution and Reduction

As chemical reactions and charge-transfer simultaneously occur on the catalyst surface during electrocatalysis, numerous studies have been carried out to attain an in-depth understanding on the correlation among the surface structure and composition, the electrical transport, and the overall catalytic activity. Compared with other catalysis reactions, a relatively larger activation barrier for oxygen evolution/reduction reactions (OER/ORR), where multiple electron transfers are involved, is noted. Many works over the past decade thus have been focused on the atomic-scale control of the surface structure and the precise identification of surface composition change in catalyst materials to achieve better conversion efficiency. In particular, recent advances in various analytical tools have enabled noteworthy findings of unexpected catalytic features at atomic resolution, providing significant insights toward reducing the activation barriers and subsequently improving the catalytic performance. In addition to summarizing important surface issues, including lattice defects, related to the OER and ORR in this Review, we present the current status and discuss future perspectives of oxide- and alloy-based catalysts in terms of atomic-scale observation and manipulation.

Recent Advances of First d-Block Metal-Based Perovskite Oxide Electrocatalysts for Alkaline Water Splitting

First d-block metal-based perovskite oxides (FDMPOs) have garnered significant attention in research for their utilization in the water oxidation reaction due to their low cost, earth abundance, and promising activities. Recently, FDMPOs are being applied in electrocatalysis for the hydrogen evolution reaction (HER) and overall water splitting reaction. Numerous promising FDMPO-based water splitting electrocatalysts have been reported, along with new catalytic mechanisms. Therefore, an in-time summary of the current progress of FDMPO-based water splitting electrocatalysts is now considered imperative. However, few reviews have focused on this particular subject thus far. In this contribution, we review the most recent advances (mainly within the years 2014–2020) of FDMPO electrocatalysts for alkaline water splitting, which is widely considered to be the most promising next-generation technology for future large-scale hydrogen production. This review begins with an introduction describing the fundamentals of alkaline water electrolysis and perovskite oxides. We then carefully elaborate on the various design strategies used for the preparation of FDMPO electrocatalysts applied in the alkaline water splitting reaction, including defecting engineering, strain tuning, nanostructuring, and hybridization. Finally, we discuss the current advances of various FDMPO-based water splitting electrocatalysts, including those based on Co, Ni, Fe, Mn, and other first d-block metal-based catalysts. By conveying various methods, developments, perspectives, and challenges, this review will contribute toward the understanding and development of FDMPO electrocatalysts for alkaline water splitting.

Enhancing the Electrocatalysis of LiNi0.5Co0.2Mn0.3O2 by Introducing Lithium Deficiency for Oxygen Evolution Reaction

LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523), as a cathode material for rechargeable lithium-ion batteries, has attracted considerable attention and been successfully commercialized for decades. NCM is also a promising electrocatalyst for the oxygen evolution reaction (OER), and the catalytic activity is highly correlated to its structure. In this paper, we successfully obtain NCM523 with three different structures: spinel NCM synthesized at low temperature (LT-NCM), disordered NCM (DO-NCM) with lithium deficiency obtained at high temperature, and layered hexagonal NCM at high temperature (HT-NCM). By introducing lithium deficiency to tune the valence state of transition metals in NCM from Ni²⁺ to Ni³⁺, DO-NCM exhibits the best catalytic activity with the lowest onset potential (∼1.48 V) and Tafel slope (∼85.6 mV dec^-1), whereas HT-NCM exhibits the worst catalytic activity with the highest onset potential (∼1.63 V) and Tafel slope (∼241.8 mV dec^-1).

Influence of Surface Oxygen Vacancies and Ruthenium Valence State on the Catalysis of Pyrochlore Oxides

Proton exchange membrane (PEM) water electrolysis is a promising energy storage solution by electrochemically splitting water into hydrogen fuel and oxygen. However, the sluggish kinetics, high operating potential, and corrosive acidic environment during the oxygen evolution reaction (OER) require the use of scarce and costly Ir-based oxides, tremendously hampering its large-scale commercialization. Hence, developing active and stable anode catalysts with reduced precious-metal usage is desperately essential. For the first time, we report a group of Y_2-xBa_xRu₂O₇ pyrochlore oxides and employ them in acid OER and PEM electrolyzers. We reveal the mechanism for the promoted OER performance of Ba-doped Y₂Ru₂O₇ in which partially replacing Y³⁺ by Ba²⁺ in Y₂Ru₂O₇ greatly facilitates the hole-doping effect, which generates massive oxygen vacancy and multivalence of Ru⁵⁺/Ru⁴⁺, thus boosting the OER performance of Y_2-xBa_xRu₂O₇. This work provides an effective method and paradigm for improving the electrocatalytic property of pyrochlore oxides.

Surface Reconstruction of La0.8Sr0.2Co0.8Fe0.2O3-δ for Superimposed OER Performance

Perovskites have become important OER electrocatalysts. Herein, as-prepared La_0.8Sr_0.2Co_0.8Fe_0.2O_3-δ (LSCF-0) is chosen as a sample to exhibit the superimposed effect of surface reconstruction accompanied by reduction of Co³⁺ to Co²⁺ on the further improvement of its activity and stability. As-synthesized LSCF-0 perovskite is chemically treated by simply immersing in an aqueous solution of NaBH₄ for 1.0 h at room temperature. The optimized LSCF (LSCF-2) owns an amorphous layer consisting of nanosized particles of ∼20 nm (vs smooth bulk crystalline surface for untreated LSCF), which exhibits superior OER performance to LSCF-0. LSCF-2 has an overpotential of 248 mV (10 mA cm^-2) and a Tafel slope of 51 mV dec^-1 (vs 355 mV and 76 mV dec^-1 for LSCF-0 and 381 mV and 91 mV dec^-1 for LCO) and an excellent cycle stability for 20 h running. This work supplies a new strategy to enhance OER performance through surface reconstruction of as-prepared perovskites.

Sr, Fe Co-doped Perovskite Oxides With High Performance for Oxygen Evolution Reaction

Developing efficient and earth-abundant electrocatalysts for the oxygen evolution reaction (OER) is still a big challenge. Here, perovskite La_0.4Sr_0.6Ni_0.5Fe_0.5O₃ nanoparticles were rationally designed and synthesized by the sol-gel method with an average size around 25 nm, and it has a remarkable intrinsically activity and stability in 1 M KOH solution. Compared with other perovskite (LaNiO₃, LaFeO₃, and LaNi_0.5Fe_0.5O₃) catalysts, La_0.4Sr_0.6Ni_0.5Fe_0.5O₃ exhibits superior OER performance, smaller tafel slope and lower overpotential. The high electrochemical performance of La_0.4Sr_0.6Ni_0.5Fe_0.5O₃ is attributed to its optimized e_g filling (~1.2), as well as the excellent conductivity. This study demonstrates co-doping process is an effective way for increasing the intrinsic catalytic activity of the perovskite.

IrO2-incorporated La0.8Sr0.2MnO3 as a bifunctional oxygen electrocatalyst with enhanced activities

An IrO₂-incorporated La_0.8Sr_0.2MnO₃ composite has been developed as a novel bifunctional oxygen electrocatalyst with enhanced electrocatalytic activities toward both the OER and ORR due to the synergistic effect among the two materials.

Emerging Materials in Heterogeneous Electrocatalysis Involving Oxygen for Energy Harvesting

Water-based renewable energy cycle involved in water splitting, fuel cells, and metal-air batteries has been gaining increasing attention for sustainable generation and storage of energy. The major challenges in these technologies arise due to the poor kinetics of the oxygen reduction reaction (ORR) and the oxygen evolution reactions (OER), besides the high cost of the catalysts. Attempts to address these issues have led to the development of many novel and inexpensive catalysts as well as newer mechanistic insights, particularly so in the last three-four years when more catalysts have been investigated than ever before. With the growing emphasis on bifunctionality, that is, materials that can facilitate both reduction and evolution of oxygen, this review is intended to discuss all major families of ORR, OER, and bifunctional catalysts such as metals, alloys, oxides, other chalcogenides, pnictides, and metal-free materials developed during this period in a single platform, while also directing the readers to specific and detailed review articles dealing with each family. In addition, each section highlights the latest theoretical and experimental insights that may further improve ORR/OER performances. The bifunctional catalysts being sufficiently new, no consensus appears to have emerged about the efficiencies. Therefore, a statistical analysis of their performances by considering nearly all literature reports that have appeared in this period is presented. The current challenges in rational design of these catalysts as well as probable strategies to improve their performances are presented.

Molybdenum and Niobium Codoped B-Site-Ordered Double Perovskite Catalyst for Efficient Oxygen Evolution Reaction

An abundant, highly active, and durable oxygen evolution reaction (OER) electrocatalyst is an enabling component for a more sustainable energy future. We report, herein, a molybdenum and niobium codoped B-site-ordered double perovskite oxide with a compositional formula of Ba₂CoMo_0.5Nb_0.5O_6-δ (BCMN) as an active and robust catalyst for OER in an alkaline electrolyte. BCMN displayed a low overpotential of 445 mA at a current density of 10 mA cm^-2_disk. BCMN also showed long-term stability in an alkaline medium. This work hints toward the possibility of combining a codoping approach with double perovskite structure formation to achieve significant enhancement in the OER performance.

Activating the Bifunctionality of a Perovskite Oxide toward Oxygen Reduction and Oxygen Evolution Reactions

This article presents a facile and effective approach to activate the bifunctionality of calcium-manganese perovskites toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). We substituted Nb into the Mn site of CaMnO₃ (CMO) and treated the material with H₂. The as-obtained CaMn_0.75Nb_0.25O_3-δ (H₂-CMNO) displays the same structure as that of CMO, and compared to that of CMO, H₂-CMNO exhibits significantly improved OER performance, including a lower overpotential, a reduced Tafel slope, a higher mass activity, and enhanced stability. In addition, the ORR performance of H₂-CMNO is also greatly enhanced, relative to CMO, with a higher ORR activity and a more efficient electron-transfer pathway. H₂-CMNO shows an even higher activity-per-catalyst cost and superior stability than that of state-of-the-art materials, such as IrO₂ and Pt/C. This great enhancement in ORR and OER activity of H₂-CMNO is attributed to several factors, including phase stabilization, optimized e_g filling, better OH^- adsorption, and improved electrical conductivity.