Bioinspired and Biomimetic AgNPs/Gentamicin-Embedded Silk Fibroin Coatings for Robust Antibacterial and Osteogenetic Applications

Construction and antibacterial activities of walnut green husk polysaccharide based silver nanoparticles (AgNPs)

In this paper, the size-controllable nano‑silver particles (AgNPs) were synthesized from walnut green husk polysaccharide, and its cytotoxicity and antibacterial activity were evaluated. Firstly, acidic polysaccharide WGHP2 was extracted from walnut green husk, and then the silver ion in AgNO3 was reduced in WGHP2 aqueous solution using NaBH4, so as to synthesize the nano‑silver composite. The nano‑silver composite was characterized by transmission electron microscope, Fourier infrared spectroscopy, ultraviolet-visible spectrometer, scanning electron microscope, inductively coupled plasma mass spectrometry and X-ray photoelectron spectroscopy. The results show that AgNPs stabilized by WGHP2 are mainly regular spheres with an average particle size distribution of 15.04-19.23 nm. The particle size distribution and morphology of AgNPs changed with the concentration of silver precursor, which is related to the dispersion of silver precursor in polysaccharide aqueous solution and the formation of AgO coordination bond between silver precursor and polysaccharide molecules. These coordination bonds changed the ability of nanoparticles to produce and release Ag+, and thus regulated their antibacterial activity and cytotoxicity, as evidenced by the experimental result of the cytotoxicity of the nano‑silver particle against PC12 cells and the bacteriostatic effect on E.coli and S.aureus. Conclusively, WGHP2-Ag has good stability, antibacterial activity and low cytotoxicity.

Composited silk fibroins ensured adhesion stability and magnetic controllability of Fe3O4-nanoparticle coating on implant for biofilm treatment

Magnetic propulsion of nano-/micro-robots is an effective way to treat implant-associated infections by physically destroying biofilm structures to enhance antibiotic killing. However, it is hard to precisely control the propulsion in vivo. Magnetic-nanoparticle coating that can be magnetically pulled off does not need precise control, but the requirement of adhesion stability on an implant surface restricts its magnetic responsiveness. Moreover, whether the coating has been fully pulled-off or not is hard to ensure in real-time in vivo. Herein, composited silk fibroins (SFMA) are optimized to stabilize Fe3O4 nanoparticles on a titanium surface in a dry environment; while in an aqueous environment, the binding force of SFMA on titanium is significantly reduced due to hydrophilic interaction, making the coating magnetically controllable by an externally-used magnet but still stable in the absence of a magnet. The maximum working distance of the magnet can be calculated using magnetomechanical simulation in which the yielding magnetic traction force is strong enough to pull Fe3O4 nanoparticles off the surface. The pulling-off removes the biofilms that formed on the coating and enhances antibiotic killing both in vitro and in a rat sub-cutaneous implant model by up to 100 fold. This work contributes to the practical knowledge of magnetic propulsion for biofilm treatment.

Deciphering silver nanoparticles perturbation effects and risks for soil enzymes worldwide: Insights from machine learning and soil property integration

Globally extensive research into how silver nanoparticles (AgNPs) affect enzyme activity in soils with differing properties has been limited by cost-prohibitive sampling. In this study, customized machine learning (ML) was used to extract data patterns from complex research, with a hit rate of Random Forest > Multiple Imputation by Chained Equations > Decision Tree > K-Nearest Neighbors. Results showed that soil properties played a pivotal role in determining AgNPs' effect on soil enzymes, with the order being pH > organic matter (OM) > soil texture ≈ cation exchange capacity (CEC). Notably, soil enzyme activity was more sensitive to AgNPs in acidic soil (pH < 5.5), while elevated OM content (>1.9 %) attenuated AgNPs toxicity. Compared to soil acidification, reducing soil OM content is more detrimental in exacerbating AgNPs' toxicity and it emerged that clay particles were deemed effective in curbing their toxicity. Meanwhile sand particles played a very different role, and a sandy soil sample at > 40 % of the water holding capacity (WHC), amplified the toxicity of AgNPs. Perturbation mapping of how soil texture alters enzyme activity under AgNPs exposure was generated, where soils with sand (45-65 %), silt (< 22 %), and clay (35-55 %) exhibited even higher probability of positive effects of AgNPs. The average calculation results indicate the sandy clay loam (75.6 %), clay (74.8 %), silt clay (65.8 %), and sandy clay (55.9 %) texture soil demonstrate less AgNPs inhibition effect. The results herein advance the prediction of the effect of AgNPs on soil enzymes globally and determine the soil types that are more sensitive to AgNPs worldwide.

Zwitterionic silver nanoparticle based antibacterial eye drops for efficient therapy of bacterial keratitis

Inefficient biofilm clearance and the risk of drug resistance pose significant challenges for antibiotic eye drops in the treatment of bacterial keratitis (BK). Recently, silver nanoparticles (AgNPs) have emerged as promising alternatives to antibiotics due to their potent antibacterial activity and minimal drug resistance. However, concerns regarding the potential biotoxicity of aggregated AgNPs in tissues have limited their practical application. In this study, polyzwitterion-functionalized AgNPs with excellent dispersion stability in the ocular physiological environment were chosen to prepare antibacterial eye drops. Zwitterionic AgNPs were synthesized using a copolymer, poly(sulfobetaine methacrylate-co-dopamine methacrylamide) (PSBDA), as a stabilizer and a reducing agent. The resulting antibacterial eye drops, named ZP@Ag-drops, demonstrated outstanding biocompatibility in in vitro cytotoxicity tests and in vivo rabbit eye instillation experiments, attributed to the zwitterionic PSBDA surface. Furthermore, the ZP@Ag-drops exhibited strong antibacterial activity against multiple pathogenic bacteria, particularly in penetrating and eradicating biofilms, due to the synergistic bactericidal effect of the released Ag+ and reactive oxygen species (ROS). Importantly, in vivo BK rabbit models showed that the ZP@Ag-drops effectively inhibited corneal infection and prevented ocular tissue damage, surpassing the therapeutic effect of commercial levofloxacin eye drops (LEV-drops). Overall, this study presents a promising alternative option for the effective treatment of BK using antibacterial eye drops.

Uptake of Silver-Containing Nanoparticles in an Estuarine Plant: Speciation and Bioaccumulation

Understanding the bioaccumulation of silver-containing nanoparticles (Ag-NPs) with different species, concentrations, and sizes in estuarine plants is critical to their related environmental risk. Herein, the distribution of Ag-NPs in tidewater, sediments, and plants (Scirpus triqueter) of field-constructed mesocosm was investigated, where tidewater was exposed to Ag0-NPs and Ag+ at environmentally relevant concentrations. Particle number concentrations (PNCs) and sizes of Ag-NPs with various species were analyzed using a multistep selective dissolution method followed by the single-particle- inductively coupled plasma mass spectrometry technique. After 30 days of exposure, more than half of Ag0-NPs were dissolved to Ag+ and about 1/4 of Ag+ were transformed into Ag0-/AgCl-NPs in tidewater. Ag-NPs in stems exposed to Ag0-NPs were found to be dominated by metallic Ag, while Ag+ exposure led to more Ag2S-NPs in stems. In roots, 71% and 51% of Ag-NPs were found as Ag2S-NPs for Ag0-NPs and Ag+ treatment groups, respectively. Plant stems had a significantly higher enrichment of Ag-NPs than roots. Based on both random forests and structure equation models, it is suggested that salinity of tidewater can regulate Ag0-NPs in tidewater indirectly by influencing AgCl-NPs in tidewater and further affect the total PNCs of Ag-NPs in plant stems. Moreover, elevated sulfate-reducing bacteria (SRB) result in more Ag2S-NPs in rhizosphere sediments, thereby enhancing the bioaccumulation of Ag-NPs by roots.

Application of silk fibroin coatings for biomaterial surface modification: a silk road for biomedicine

Silk fibroin (SF) as a natural biopolymer has become a popular material for biomedical applications due to its minimal immunogenicity, tunable biodegradability, and high biocompatibility. Nowadays, various techniques have been developed for the applications of SF in bioengineering. Most of the literature reviews focus on the SF-based biomaterials and their different forms of applications such as films, hydrogels, and scaffolds. SF is also valuable as a coating on other substrate materials for biomedicine; however, there are few reviews related to SF-coated biomaterials. Thus, in this review, we focused on the surface modification of biomaterials using SF coatings, demonstrated their various preparation methods on substrate materials, and introduced the latest procedures. The diverse applications of SF coatings for biomedicine are discussed, including bone, ligament, skin, mucosa, and nerve regeneration, and dental implant surface modification. SF coating is conducive to inducing cell adhesion and migration, promoting hydroxyapatite (HA) deposition and matrix mineralization, and inhibiting the Notch signaling pathway, making it a promising strategy for bone regeneration. In addition, SF-coated composite scaffolds can be considered prospective candidates for ligament regeneration after injury. SF coating has been proven to enhance the mechanical properties of the substrate material, and render integral stability to the dressing material during the regeneration of skin and mucosa. Moreover, SF coating is a potential strategy to accelerate nerve regeneration due to its dielectric properties, mechanical flexibility, and angiogenesis promotion effect. In addition, SF coating is an effective and popular means for dental implant surface modification to promote osteogenesis around implants made of different materials. Thus, this review can be of great benefit for further improvements in SF-coated biomaterials, and will undoubtedly contribute to clinical transformation in the future.

Research progress on antibacterial activity of medical titanium alloy implant materials

Titanium and its alloys are the preferred materials for medical implants. However, easy infection is a fatal shortcoming of Ti implants. Fortunately, the ongoing development of antibacterial implant materials is a promising solution, and Ti alloys with antibacterial properties hold immense potential for medical applications. In this review, we briefly outline the mechanisms of bacterial colonization and biofilm formation on implants; discuss and classify the major antimicrobials currently in use and development, including inorganic and organic antimicrobials; and describe the important role of antimicrobials in the development of implant materials for clinical applications. Strategies and challenges related to improving the antimicrobial properties of implant materials as well as the prospects of antibacterial Ti alloys in the medical field are also discussed.

Dual-sized hollow particle incorporated fibroin thermal insulating coatings on catheter for cerebral therapeutic hypothermia

Selective endovascular hypothermia has been used to provide cooling-induced cerebral neuroprotection, but current catheters do not support thermally-insulated transfer of cold infusate, which results in an increased exit temperature, causes hemodilution, and limits its cooling efficiency. Herein, air-sprayed fibroin/silica-based coatings combined with chemical vapor deposited parylene-C capping film was prepared on catheter. This coating features in dual-sized-hollow-microparticle incorporated structures with low thermal conductivity. The infusate exit temperature is tunable by adjusting the coating thickness and infusion rate. No peeling or cracking was observed on the coatings under bending and rotational scenarios in the vascular models. Its efficiency was verified in a swine model, and the outlet temperature of coated catheter (75 μm thickness) was 1.8-2.0 °C lower than that of the uncoated one. This pioneering work on catheter thermal insulation coatings may facilitate the clinical translation of selective endovascular hypothermia for neuroprotection in patients with acute ischemic stroke.

Performance optimization of biomimetic ant-nest silver nanoparticle coatings for antibacterial and osseointegration of implant surfaces

Infection prevention and bone-implant integration remain major clinical challenges. Silver nanoparticle (AgNPs) bone-implant coatings have received extensive attention. Balancing the toxicity and antibacterial properties of AgNP coatings has become a significant problem. In this study, inspired by the structure of the ant-nest, a polyetherimide (PEI) coating with ant-nest structure was prepared, aiming to realize the structural modification of the AgNPs coating. AgNPs were loaded in the inner porous area of the PEI ant-nest coating, avoiding direct contact between AgNPs and cells. The nanopores on the surface of the coating ensured the orderly release of silver ions. SEM, FTIR, XPS, and XRD experiments confirmed that the PEI ant-nest coating was successfully prepared. Interestingly, in the PEI ant-nest coating, Ag⁺ showed a steady increase in the release trend within 28 days, and there was no early burst release phenomenon. In -vivo experiments showed a good control effect for local infection. In order to improve the osteogenic properties of the materials, 45S5 bioactive glasses (BG) were loaded to achieve further osseointegration. In general, this natural ant-nest-inspired surface modification coating for orthopedic prostheses provides a new strategy for balancing the antibacterial and toxic effects of AgNP coatings.

Investigation of Antimicrobial Effects of Polydopamine-Based Composite Coatings

Herein, polydopamine (PDA)-based antimicrobial coatings loaded with silver nanoparticles (Ag NPs) and gentamicin were designed and prepared on glass slides using two different approaches. To our knowledge, this study was performed for the first time with the aim to compare these methods (viz., in situ loading and physical adsorption method) regarding the loading and release behavior of payloads. In one method, gentamicin was in situ loaded on PDA-coated substrates during PDA polymerization followed by Ag NPs immobilization (named as Ag@Gen/PDA); for the second method, Ag NPs and gentamicin were simultaneously loaded onto PDA via physical adsorption by immersing pre-formed PDA coatings into a mixed solution of Ag NPs and gentamicin (named as Ag/Gen@PDA). The loading and release characteristics of these antimicrobial coatings were compared, and both gave variable outcomes. The in situ loading method consequently provided a relatively slow release of loaded antimicrobials, i.e., approx. 46% for Ag@Gen/PDA as compared to 92% from physically adsorbed Ag/GenPDA in an immersion period of 30 days. A similar trend was observed for gentamicin release, i.e., ~0.006 µg/mL from Ag@Gen/PDA and 0.02 µg/mL from Ag/Gen@PDA each day. The slower antimicrobial release from Ag@Gen/PDA coatings would ultimately provide an effective long-term antimicrobial property as compared to Ag/Gen@PDA. Finally, the synergistic antimicrobial activities of these composite coatings were assessed against two microbial species, namely, Staphylococcus aureus and Escherichia coli, hence providing evidence in the prevention of bacterial colonization.

Biodegradable wound dressing-based collagen/hyaluronic acid loaded antibacterial agents for wound healing application

Three biodegradable wound dressing based on binary Collagen (COL), Hyaluronic acid (HA) crosslinked loaded with silver nanoparticles (AgNPs), Gentamicin (GENT) and AgNPs/GENT successfully prepared using freeze drying technique. Chemical evaluations for synthesized membranes were carried out using FTIR- ATR. While physical properties were evaluated through swelling and degradation percent. Antibacterial activity was evaluated against G+, G-, yeast and fungi. Finally, cytotoxicity and wound healing evaluations were carried out against skin fibroblast normal cell line, while anti-inflammatory evaluated using RAW 264.7 macrophage cell line. The three produced membrane showed physically interaction between polymer network and the loaded antibiotic. Swelling properties showed superior results for three membranes. Degradability of prepared sheets was rapidly no more than three days. Toxicity evaluations and anti-inflammatory showed superior results for all examined samples except mixed with AgNPs and Gentamicin (GENT). Antibacterial activity showed resistance to G+, G- and yeast. All prepared sheet showed safe towards cell except COL/HA/AgNPs/GENT. Wound healing studied showed efficient of both COL/HA/AgNPs and COL/HA/GENT compared to blank and mixed membrane COL/HA/AgNPs/GENT. The obtained results recommended COL/HA loaded individually either AgNPs or Gentamicin (GENT) as antibacterial and wound healing sheet rather than mixed prepared membrane.

Recapitulating Antioxidant and Antibacterial Compounds into a Package for Tissue Regeneration: Dual Function Materials with Synergistic Effect

Oxidative damage and infection can prevent or delay tissue repair. Moreover, infection reinforces reactive oxygen species (ROS) formation, which makes the wound's condition even worse. Therefore, the need for antioxidant and antibacterial agents is felt for tissue regeneration. There are emerging up-and-coming biomaterials that recapitulate both properties into a package, offering an effective solution to turn the wound back into a healing state. In this article, the principles of antioxidant and antibacterial activity are summarized. The review starts with biological aspects, getting the readers to familiarize themselves with tissue barriers against infection. This is followed by the chemistry and mechanism of action of antioxidant and antibacterial materials (dual function). Eventually, the outlook and challenges are underlined to provide where the dual-function biomaterials are and where they are going in the future. It is expected that the present article inspires the designing of dual-function biomaterials to more advanced levels by providing the fundamentals and comparative points of view and paving the clinical way for these materials.

Silk-based conductive materials for smart biointerfaces

Silk-based conductive materials are widely used in biointerface applications, such as artificial epidermal sensors, soft and implantable bioelectronics, and tissue/cell scaffolds. Such biointerface materials require coordinated physicochemical, biological, and mechanical properties to meet current practical needs and future sophisticated demands. However, it remains a challenge to formulate silk-based advanced materials with high electrical conductivity, good biocompatibility, mechanical robustness, and in some cases, tissue adhesion ability without compromising other physicochemical properties. In this review, we highlight recent progress in the development of functional conductive silk-based advanced materials with different morphologies. Then, we reviewed the advanced paradigms of these silk materials applied as wearable flexible sensors, implantable electronics, and tissue/cell engineering with perspectives on the application challenges. Silk-based conductive materials can serve as promising building blocks for biomedical devices in personalized healthcare and other fields of bioengineering.

Biomimetic AgNPs@antimicrobial peptide/silk fibroin coating for infection-trigger antibacterial capability and enhanced osseointegration

Endowing implant surfaces with combined antibacterial and osteogenic properties by drug-loaded coatings has made great strides, but how to achieve the combined excellence of infection-triggered bactericidal and in vivo-proven osteogenic activities without causing bacterial resistance still remains a formidable challenge. Herein, antimicrobial peptides (AMPs) with osteogenic fragments were designed and complexed on the surface of silver nanoparticle (AgNP) through hydrogen bonding, and the collagen structure-bionic silk fibroin (SF) was applied to carry AgNPs@ AMPs to achieve infection-triggered antibacterial and osteointegration. As verified by TEM, AMPs contributed to the dispersion and size-regulation of AgNPs, with a particle size of about 20 nm, and a clear protein corona structure was observed on the particle surface. The release curve of silver ion displayed that the SF-based coating owned sensitive pH-responsive properties. In the antibacterial test against S.aureus for up to 21 days, the antibacterial rate had always remained above 99%. Meanwhile, the underlying mechanism was revealed, originating from the destruction of the bacterial cell membranes and ROS generation. The SF-based coating was conducive to the adhesion, diffusion, and proliferation of bone marrow stem cells (BMSCs) on the surface, and promoted the expression of osteogenic genes and collagen secretion. The in vivo implantation results showed that compared with the untreated Ti implants, SF-based coating enhanced osseointegration at week 4 and 8. Overall, the AgNPs@AMPs-loaded SF-based coating presented the ability to synergistically inhibit bacteria and promote osseointegration, possessing tremendous potential application prospects in bone defects and related-infection treatments.

•

AMPs and AgNPs were complexed through hydrogen bonds to form a protein crowns structure.

•

Silk fibroin matrix was able to maintain the activity of AMPs over 21 d and endow with the infection-trigger release.

•

The functional coating achieved synergistic antibacterial properties by damaging membrane structure and generating ROS.

•

The coating displayed acceptable osteogenic properties in vitro and observably promoted osteointegration in vivo.

Biomimetic Hydroxyapatite Composite Coatings with a Variable Morphology Mediated by Silk Fibroin and Its Derived Peptides Enhance the Bioactivity on Titanium

Various modifications performed on titanium alloy surfaces are shown to improve osteointegration and promote the long-term success of implants. In this work, a bioactive nanostructured hydroxyapatite (HA) composite coating with a variable morphology mediated by silk fibroin (SF) and its derived peptides (Cs) was prepared. Numerous experimental techniques were used to characterize the constructed coatings in terms of morphology, roughness, hydrophilicity, protein adsorption, in vitro biomineralization, and adhesion strength. The mixed protein layer with different contents of SF and Cs exhibited different secondary structures at different temperatures, effectively mediating the electrodeposited HA layer with different characteristics and finally forming proteins/HA composite coatings with versatile morphologies. The addition of Cs significantly improved the hydrophilicity and protein adsorption capacity of the composite coatings, while the electrodeposition of the HA layer effectively enhanced the adhesion between the composite coatings and Ti surface. In the in vitro mineralization experiments, all the composite coatings exhibited excellent apatite formation ability. Moreover, the composite coatings showed excellent cell growth and proliferation activity. Osteogenic induction experiments revealed that the coating could significantly increase the expression of specific osteogenic markers, including ALP, Col-I, Runx-2, and OCN. Overall, the proposed modification of the Ti implant surface by protein/HA coatings had good potential for clinical applications in enhancing bone induction and osteogenic activity of implants.

Silk proteins in reconstructive surgery: Do they possess an inherent antibacterial activity? A systematic review

The field of reconstructive surgery encompasses a wide range of surgical procedures and regenerative approaches to treat various tissue types. Every surgical procedure is associated with the risk of surgical site infections, which are not only a financial burden but also increase patient morbidity. The surgical armamentarium in this area are biomaterials, particularly natural, biodegradable, biocompatible polymers, including the silk proteins fibroin (SF) and sericin (SS). Silk is known to be derived from silkworms and is mainly composed of 60-80% fibroin, which provides the structural form, and 15-35% sericin, which acts as a glue-like substance for the SF threads. Silk proteins possess most of the desired properties for biomedical applications, including biocompatibility, biodegradability, minimal immunogenicity, and tunable biomechanical behaviour. In an effort to alleviate or even prevent infections associated with the use of biomaterials in surgery, antibacterial/antimicrobial properties have been investigated in numerous studies. In this systematic review, the following question was addressed: Do silk proteins, SF and SS, possess an intrinsic antibacterial property and how could these materials be tailored to achieve such a property?

Silk fibroin scaffolds: A promising candidate for bone regeneration

It remains a big challenge in clinical practice to repair large-sized bone defects and many factors limit the application of autografts and allografts, The application of exogenous scaffolds is an alternate strategy for bone regeneration, among which the silk fibroin (SF) scaffold is a promising candidate. Due to the advantages of excellent biocompatibility, satisfying mechanical property, controllable biodegradability and structural adjustability, SF scaffolds exhibit great potential in bone regeneration with the help of well-designed structures, bioactive components and functional surface modification. This review will summarize the cell and tissue interaction with SF scaffolds, techniques to fabricate SF-based scaffolds and modifications of SF scaffolds to enhance osteogenesis, which will provide a deep and comprehensive insight into SF scaffolds and inspire the design and fabrication of novel SF scaffolds for superior osteogenic performance. However, there still needs more comprehensive efforts to promote better clinical translation of SF scaffolds, including more experiments in big animal models and clinical trials. Furthermore, deeper investigations are also in demand to reveal the degradation and clearing mechanisms of SF scaffolds and evaluate the influence of degradation products.

Bio-Inspired Self-Adaptive Nanocomposite Array: From Non-antibiotic Antibacterial Actions to Cell Proliferation

Pathogenic bacterial infection and poor native tissue integration are two major issues encountered by biomaterial implants and devices, which are extremely hard to overcome within a single surface, especially for those without involvement of antibiotics. Herein, a self-adaptive surface that can transform from non-antibiotic antibacterial actions to promotion of cell proliferation is developed by in situ assembly of bacteriostatic 3,3'-diaminodipropylamine (DADP)-doped zeolitic imidazolate framework-8 (ZIF-8) on bio-inspired nanopillars. Initially, the nanocomposite surface shows impressive antibacterial effects, even under severe bacterial infection, due to the combination of mechano-bactericidal activity from a nanopillar structure and bacteriostatic activity contributed by pH-responsive release of DADP. After the complete degradation of the ZIF-8 layer, the refurbished nanopillars not only can still physically rupture bacterial membrane but also facilitate mammalian cell proliferation, due to the obvious difference in cell size. More strikingly, the nanocomposite surface totally avoids the usage of antibiotics, eradicating the potential risk of antimicrobial resistance, and the surface exhibited excellent histocompatibility and lower inflammatory response properties as revealed by in vivo tests. This type of self-adaptive surface may provide a promising alternative for addressing the intractable implant-associated requirements, where antibiotic-free antibacterial activity and native tissue integration are both highly needed.

The Antibacterial and Cytotoxic Effects of Silver Nanoparticles Coated Titanium Implants: A Narrative Review

Nanotechnology has become an emerging research field with numerous biomedical scientific applications. Silver possesses bactericidal activities that have been harnessed for centuries; however, there is a concern about the toxic effects of silver nanoparticles. This paper aims to provide an overview of silver-treated dental implants and discuss their potential to reduce the prevalence of peri-implant diseases. An electronic search was performed using PubMed. After screening, data extraction was performed on the 45 remaining articles using inclusion and exclusion criteria. Most of the articles demonstrated that silver nanoparticles embedded in a coating layer and/or on surface-treated titanium exhibit sound antibacterial effects and biocompatibility. Most of the reviewed studies revealed that silver nanoparticles on dental implant surfaces reduced cytotoxicity but provided a prolonged antibacterial effect. The cytotoxicity and antibacterial effect are closely linked to how the silver nanoparticles are released from the titanium surfaces, where a slower release increases cell viability and proliferation. However, to improve the clinical translation, there is still a need for more studies, especially evaluating the long-term systemic effects and studies recreating the conditions in the oral cavity.

One-step coordination of metal-phenolic networks as antibacterial coatings with sustainable and controllable copper release for urinary catheter applications

Catheter-associated urinary tract infections (CAUTIs) draw great concern due to increased demand for urinary catheters in hospitalization. Encrustation caused by urinary pathogens, especially Proteus mirabilis, results in blocking of the catheter lumen and further infections. In this study, a facile and low-cost surface modification strategy of urinary catheters was developed using one-step coordination of tannic acid (TA) and copper ions. The copper content of the coating could be manipulated by the number of TA-Cu (TC) layers, and the coating released copper in a pH-responsive manner. The coating exhibited high antibacterial efficiency (killed >99% of planktonic bacteria, and reduced biofilm coverage to <1% after 24 h) due to the synergistic antimicrobial effect of TA and copper ions. In vivo study with a rabbit model indicated that with two TC layers, the coated catheter could effectively inhibit bacterial growth in urine and colonization on the surface, and reduce encrustation formation. In addition, the TC-coated catheter exhibited better tissue compatibility compared to the unmodified catheter, probably due to the antibacterial performance of the coating. Such a straightforward coating strategy with good in vitro and in vivo antibacterial properties and biocompatibility holds great promise for combating CAUTIs in clinical practice.

Bioinspired Surface Functionalization of Poly(ether ether ketone) for Enhancing Osteogenesis and Bacterial Resistance

In orthopedics, developing functionalized biomaterials to enhance osteogenesis and bacterial resistance is crucial. Although poly(ether ether ketone) (PEEK) is regarded as an important engineering plastic for biomedical material with excellent mechanical properties and biocompatibility, its biological inertness has greatly compromised its application in biomedical engineering. Inspired by the catecholamine chemistry of mussels, we propose a universal and versatile approach for enhancing the osteogenesis and antibacterial performances of PEEK based on surface functionalization of polydopamine-modified nanohydroxyapatite and lysozyme simultaneously. The characterizations of surface morphology and elemental composition revealed that the composite coating was successfully added to the PEEK surface. Additionally, the in vitro cell experiment and biomineralization assay indicated that the composite coating-modified PEEK was biocompatible with significantly improved bioactivity to promote osteogenesis and biomineralization compared with the untreated PEEK. Furthermore, the antibacterial test demonstrated that the composite coating had a strongly destructive effect on two bacteria (Staphylococcus aureus and Escherichia coli) with antibacterial ratios of 98.7% and 96.1%, respectively. In summary, the bioinspired method for surface functionalization can enhance the osteogenesis and bacterial resistance of biomedical materials, which may represent a potential approach for designing functionalized implants in orthopedics.

Antibacterial properties of functionalized silk fibroin and sericin membranes for wound healing applications in oral and maxillofacial surgery

Oral wounds are among the most troublesome injuries which easily affect the patients' quality of life. To date, the development of functional antibacterial dressings for oral wound healing remains a challenge. In this regard, we investigated antibacterial silk protein-based membranes for the application as wound dressings in oral and maxillofacial surgery. The present study includes five variants of casted membranes, i.e., i) membranes-silver nanoparticles (CM-Ag), ii) membranes-gentamicin (CM-G), iii) membranes-control (without functionalization) (CM-C), iv) membranes-silk sericin control (CM-SSC), and v) membranes-silk fibroin/silk sericin (CM-SF/SS), and three variants of nonwovens, i.e., i) silver nanoparticles (NW-Ag), ii) gentamicin (NW-G), iii) control (without functionalization) (NW-C). The surface structure of the samples was visualized with scanning electron microscopy. In addition, antibacterial testing was accomplished using agar diffusion assay, colony forming unit (CFU) analysis, and qrt-PCR. Following antibacterial assays, biocompatibility was evaluated by cell proliferation assay (XTT), cytotoxicity assay (LDH), and live-dead assay on L929 mouse fibroblasts. Findings indicated significantly lower bacterial colony growth and DNA counts for CM-Ag with a reduction of bacterial counts by 3log levels (99.9% reduction) in CFU and qrt-PCR assay compared to untreated control membranes (CM-C and CM-SSC) and membranes functionalized with gentamicin (CM-G and NW-G) (p < 0.001). Similarly, NW-G yielded significantly lower DNA and colony growth counts compared to NW-Ag and NW-C (p < 0.001). In conclusion, CM-Ag represented 1log level better antibacterial activity compared to NW-G, whereas NW-G showed better cytocompatibility for L929 cells. As data suggest, these two membranes have the potential of application in the field of bacteria-free oral wound healing. However, provided that loading strategy and cytocompatibility are adjusted according to the antibacterial agents' characteristic and fabrication technique of the membranes.

A Review on Antibacterial Silk Fibroin-based Biomaterials: Current State and Prospects

Bacterial contamination of biomaterials is a common problem and a serious threat to human health worldwide. Therefore, the development of multifunctional biomaterials that possess antibacterial properties and can resist infection is a continual goal for biomedical applications. Silk fibroin (SF), approved by U.S. Food and Drug Administration (FDA) as a biomaterial, is one of the most widely studied natural polymers for biomedical applications due to its unique mechanical properties, biocompatibility, tunable biodegradation, and versatile material formats. In the last decade, many methods have been employed for the development of antibacterial SF-based biomaterials (SFBs) such as physical loading or chemical functionalization of SFBs with different antibacterial agents and bio-inspired surface modifications. In this review, we first describe the current understanding of the composition and structure-properties relationship of SF as a leading-edge biomaterial. Then we demonstrate the different antibacterial agents and methods implemented for the development of bactericidal SFBs, their mechanisms of action, and different applications. We briefly address their fabrication methods, advantages, and limitations, and finally discuss the emerging technologies and future trends in this research area.

Hybrid nanocoatings of self-assembled organic-inorganic amphiphiles for prevention of implant infections

Antimicrobial coatings are one of the most promising strategies to prevent bacterial infections in orthopedic and dental implants. Combining antimicrobial agents with different antimicrobial mechanisms might have synergistic effects and be more potent. Others have shown that nanocomposites of silver nanoparticles (AgNPs) decorated with antimicrobial peptides (AMPs) show increased potency as free agents in solution. However, similar nanocomposites have not been explored to coat biomaterials through cooperative weak electrostatic attraction forces between AMP, AgNPs and substrates in need of protection against infection. In this work, we synthesized self-assembled antimicrobial amphiphiles of an AMP, GL13K. Then, we decorated the AMP nanostructures with AgNPs, which were finally used to coat etched Ti (eTi) surfaces. The strong hydrogen bonding between the AMP amphiphiles and the polar eTi yielded a robust and stable coating. When compared to single AgNP or single AMP coatings, our hybrid nanocoatings had notably higher in vitro antimicrobial potency against multiple bacteria strains related to implant infection. The hybrid coating also showed relevant antimicrobial activity in an in vivo subcutaneous infection model in rats. This work advances the application of AgNP/AMP nanocomposites as effective coatings for prevention of implant infections. STATEMENT OF SIGNIFICANCE: High morbidity, mortality and elevated costs are associated with orthopedic and dental implant infections. Conventional antibiotic treatment is ineffective due to barrier-like extracellular polymeric substances in biofilms and the increasing threat from antibiotic resistance. Antimicrobial coatings are one of the most promising strategies, but the performance is usually unsatisfactory, especially when tested in vivo. Here, we present a hybrid nanocoating with different modes of action to prevent implant infections using self-assembled antimicrobial peptide (AMP) amphiphiles decorated with silver nanoparticles (AgNPs). When compared to single AgNP or AMP coatings, our hybrid nanocoatings showed significant increases in antimicrobial potency against multiple implant infection-related bacterial strains in vitro and in an in vivo rat subcutaneous infection model.

Biomimetic Inorganic Nanoparticle-Loaded Silk Fibroin-Based Coating with Enhanced Antibacterial and Osteogenic Abilities

Poor osseointegration and infection are the main reasons leading to the failure of hard tissue implants; especially, in recent years, the failure rate has been increasing every year owing to the continuously increasing conditions such as injury, trauma, diseases, or infections. Therefore, the development of a biomimetic surface coating of bone tissues with antibacterial function is an effective means to improve bone healing and inhibit bacterial infection. Mimicking the natural bone, in this study, we have designed a silk fibroin (collagen-like structure)-based coating inlaid with nanohydroxyapatite (nHA) and silver nanoparticles (AgNPs) for promoting antibacterial ability and osteogenesis, especially focusing on the bone mimetic structure for enhancing bone health. Observing the morphology and size of the composite nanoparticles by transmission electron microscope (TEM), nHA provided nucleation sites for the formation of AgNPs, forming an nHA/AgNP complex with a size of about 100-200 nm. Characterization of the nHA/Ag-loaded silk fibroin biomimetic coating showed an increased surface roughness with good density and compact performances. The silk fibroin-based coating loaded with uniformly distributed AgNPs and nHA could effectively inhibit the adhesion of Staphylococcus aureus on the surface and, at the same time, quickly kill planktonic bacteria, indicating their good antibacterial ability. In vitro cell experiments revealed that the biomimetic silk fibroin-based coating was beneficial to the adhesion, spreading, and proliferation of osteoblasts (MC3T3-E1). In addition, by characterizing LDH and ROS, it was found that the nHA/Ag complex could significantly reduce the cytotoxicity of AgNPs, and the osteoblasts on the coating surface maintained the structure intact.

Novel fabrication of antibiotic containing multifunctional silk fibroin injectable hydrogel dressing to enhance bactericidal action and wound healing efficiency on burn wound: In vitro and in vivo evaluations

The development of biologically active multifunctional hydrogel wound dressings can assist effectively to wound regeneration and also has influenced multiple functions on wound injury. Herein, we designed a carbon-based composited injectable silk fibroin hydrogel as multifunctional wound dressing to provide effective anti-bacterial, cell compatibility and in vivo wound closure actions. Importantly, the fabricated injectable hydrogel exhibit sustained drug delivery properties, anti-oxidant and self-healing abilities, which confirm that composition of hydrogel is highly beneficial to tissue adhesions and burn wound regeneration ability. Frequently, designed injectable hydrogel can be injected into deep and irregular burn wound sites and would provide rapid self-healing and protection from infection environment with thoroughly filled wound area. Meanwhile, incorporated carbon nanofillers improve injectable hydrogel strength and also offer high fluid uptake to hydrogel when applied on the wound sites. In vitro MTT cytotoxicity assay on human fibroblast cell lines establish outstanding cytocompatibility of the injectable hydrogel and also have capability to support cell growth and proliferations. In vivo burn wound animal model results demonstrate that the hydrogel dressings predominantly influenced enhanced wound contraction and also promoted greater collagen deposition, granulation tissue thickness and vascularization. This investigation's outcome could open a new pathway to fabricate multifunctional biopolymeric hydrogel for quicker burn wound therapy and effectively prevents microenvironment bacterial infections.

Amine-Rich Coatings to Potentially Promote Cell Adhesion, Proliferation and Differentiation, and Reduce Microbial Colonization: Strategies for Generation and Characterization

Biomaterial surface modification represents an important approach to obtain a better integration of the material in surrounding tissues. Different techniques are focused on improving cell support as well as avoiding efficiently the development of infections, such as by modifying the biomaterial surface with amine groups (–NH2). Previous studies showed that –NH2 groups could promote cell adhesion and proliferation. Moreover, these chemical functionalities may be used to facilitate the attachment of molecules such as proteins or to endow antimicrobial properties. This mini-review gives an overview of different techniques which have been used to obtain amine-rich coatings such as plasma methods and adsorption of biomolecules. In fact, different plasma treatment methods are commonly used with ammonia gas or by polymerization of precursors such as allylamine, as well as coatings of proteins (for example, collagen) or polymers containing –NH2 groups (for example, polyethyleneimine). Moreover, this mini-review will present the methods used to characterize such coatings and, in particular, quantify the –NH2 groups present on the surface by using dyes or chemical derivatization methods.

Polydopamine-assisted immobilization of silk fibroin and its derived peptide on chemically oxidized titanium to enhance biological activity in vitro

Biochemical modification can endow the surface of implants with superior biological activity. Herein, silk fibroin (SF) protein and its anionic derivative peptides (Cs) were covalently immobilized onto a titanium implant surface via a polydopamine layer. The successful conjugation of SF and Cs was revealed by X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), and contact angle measurements. The addition of Cs prevented the conformational transition of silk fibroin to silk II. The deposition of apatite on its surface was significantly accelerated, and the bioactive composite coating was observed to enhance protein adsorption and cell proliferation. More importantly, it also promoted the osteogenic differentiation of bone marrow stem cells (BMSCs) for the quantitative and qualitative detection of alkaline phosphatase (ALP) and alizarin red (ARS). Overall, the stable performance and enhanced osteogenic property of the composite coating promote an extensive application for clinical titanium-based implants.

The Combined Use of Gentamicin and Silver Nitrate in Bone Cement for a Synergistic and Extended Antibiotic Action against Gram-Positive and Gram-Negative Bacteria

Using bone cement as a carrier, gentamicin was for years the default drug to locally treat orthopedic infections but has lost favor due to increasing bacterial resistance to this drug. The objective of this study was to investigate the effect of combining gentamicin with silver nitrate in bone cement against S. aureus and P. aeruginosa. Antibacterial effects (CFU counts) of gentamicin and silver were initially studied followed by studies using subtherapeutic concentrations of each in combination. The release rates from cement were measured over 10 days and day 7 release samples were saved and analyzed for antibiotic activity. A strong synergistic effect of combining silver with gentamicin was found using both dissolved drugs and using day 7 bone cement release media for both Gram-positive and Gram-negative bacteria. The cement studies were extended to vancomycin and tobramycin, which are also used in bone cement, and similar synergistic effects were found for day 7 release media with P. aeruginosa but not S. aureus. These studies conclude that the combined use of low loadings of gentamicin and silver nitrate in bone cement may offer an economical and much improved synergistic method of providing anti-infective orthopedic treatments in the clinic.

Silk Biomaterials for Bone Tissue Engineering

Silk is a natural fibrous polymer with application potential in regenerative medicine. Increasing interest remains for silk materials in bone tissue engineering due to their characteristics in biocompatibility, biodegradability and mechanical properties. Plenty of the in vitro and in vivo studies confirmed the advantages of silk in accelerating bone regeneration. Silk is processed into scaffolds, hydrogels, and films to facilitate different bone regenerative applications. Bioactive factors such as growth factors and drugs, and stem cells are introduced to silk-based matrices to create friendly and osteogenic microenvironments, directing cell behaviors and bone regeneration. The recent progress in silk-based bone biomaterials is discussed and focused on different fabrication and functionalization methods related to osteogenesis. The challenges and potential targets of silk bone materials are highlighted to evaluate the future development of silk-based bone materials.

Advances in carbohydrate-based polymers for the design of suture materials: A review

Suture materials constitute one of the largest biomedical material groups with a huge global market of $ 1.3 billion annually and employment in over 12 million procedures per year. Suture materials have radically evolved over the years, from basic strips of linen to more advanced synthetic polymer sutures. Yet, the journey to the ideal suture material is far from over and we now stand on the brink of a new era of improved suture materials with greater safety and efficacy. This next step in the evolutionary timeline of suture materials, involves the use of natural, carbohydrate polymers that have, until recent years, never before been considered for suture material applications. This review exposes the latest and most important advancements in suture material development while digging deep into how natural, carbohydrate polymers can serve to advance this field.

Based on the synergistic effect of Mg2+ and antibacterial peptides to improve the corrosion resistance, antibacterial ability and osteogenic activity of magnesium-based degradable metals

To overcome the restricted degradation, poor antiacterial and osteoindctive problems of magnesium and its alloys, this study presented the spinning coating of an antimicrobial peptide (AP)-loaded silk fibroin (SF) composite onto a corrosion-resistant MgO-coated AZ31 Mg alloy via anodization (aMgO) and electrodeposition (eMgO) methods. The composite coatings not only created a smooth and hydrophilic surface, but also obviously improved the corrosion resistance according to the test of corrosion potential and current density. The colonization of E. coli on MgO-AP composite coatings was significantly reduced as compared to the MgO layers, due to the potential synergetic effects of APs and Mg2+. Compared with the bare AZ31, the composite coating inhibited the corrosion of the substrate and the release of Mg2+, supported the adhesion, spreading and proliferation of osteoblasts, and presented a significantly improved osteogenic differentiation trend. Therefore, the MgO-AP composite coating, which had both antibacterial and bone-promoting abilities, was expected to be applied for surface modification of magnesium alloy implants to solve the clinical problems of bacterial infection and poor osseointegration.

Silver-Deposited Nanoparticles on the Titanium Nanotubes Surface as a Promising Antibacterial Material into Implants

The main disadvantage of the implants is the associated infections. Therefore, in the long term, the possibility of improving the antibacterial capacity of different types of implants (dental, orthopedic) is being researched. The severity of the problem lies in the increasing bacterial resistance and finding appropriate alternative treatments for infectious diseases, which is an important research field nowadays. The purpose of this review is to draw a parallel between different studies analyzing the antibacterial activity and mechanism of silver nanoparticles (NP Ag) deposited on the titanium nanotubes (NTT), as well as the analysis of the NP Ag toxicity. This review also provides an overview of the synthesis and characterization of TiO2-derived nanotubes (NT). Thus, the analysis aims to present the existing knowledge to better understand the NP Ag implants benefits and their antibacterial activity.

Implant functionalization with mesoporous silica: A promising antibacterial strategy, but does such an implant osseointegrate?

Objectives

New strategies for implant surface functionalization in the prevention of peri‐implantitis while not compromising osseointegration are currently explored. The aim of this in vivo study was to assess the osseointegration of a titanium‐silica composite implant, previously shown to enable controlled release of therapeutic concentrations of chlorhexidine, in the Göttingen mini‐pig oral model.

Material and Methods

Three implant groups were designed: macroporous titanium implants (Ti‐Porous); macroporous titanium implants infiltrated with mesoporous silica (Ti‐Porous + SiO₂); and conventional titanium implants (Ti‐control). Mandibular last premolar and first molar teeth were extracted bilaterally and implants were installed. After 1 month healing, the bone in contact with the implant and the bone regeneration in the peri‐implant gap was evaluated histomorphometrically.

Results

Bone‐to‐implant contact and peri‐implant bone volume for Ti‐Porous versus Ti‐Porous + SiO₂ implants did not differ significantly, but were significantly higher in the Ti‐Control group compared with Ti‐Porous + SiO₂ implants. Functionalization of titanium implants via infiltration of a SiO₂ phase into the titanium macropores does not seem to inhibit implant osseointegration. Yet, the importance of the implant macro‐design, in particular the screw thread design in a marginal gap implant surgery set‐up, was emphasized by the outstanding results of the Ti‐Control implant.

Conclusions

Next‐generation implants made of macroporous Ti infiltrated with mesoporous SiO₂ do not seem to compromise the osseointegration process. Such implant functionalization may be promising for the prevention and treatment of peri‐implantitis given the evidenced potential of mesoporous SiO₂ for controlled drug release.

In vitro and in vivo evaluation of structurally-controlled silk fibroin coatings for orthopedic infection and in-situ osteogenesis

Biomedical device-associated infections (BAI) and osteosynthesis are two main complications following the orthopedic implant surgery, especially while infecting bacteria form a mature biofilm, which can protect the organisms from the host immune system and antibiotic therapy. Comparing with the single antibiotics therapeutic method, the combination of silver nanoparticles (AgNPs) and conventional antibiotics exert a high level of antibacterial activity. Nevertheless, one major issue that extremely restricts the potential application of AgNP/antiviotics is the uncontrolled release. Moreover, the lack of osteogenic ability may cause the osteosynthesis. Thus, herein we fabricated a structure-controlled drug-loaded silk fibroin (SF) coating that can achieve the size and release control of AgNPs and high efficient osteogenesis. Three comparative SF-based coatings were fabricated: α-structured coating (α-helices 32.7%,), m-structured coating (β-sheets 28.3%) and β-structured coating (β-sheets 41%). Owning to the high content of α-helices structure and small AgNPs (20 nm), α-structured coating displayed better protein adsorption and hydrophilicity, as well as pH-dependent and long-lasting antibacterial performance. In vitro studies demonstrated that α coating showed biocompatibility (cellular attachment, spreading and proliferation), high ALP expression, collagen secretion and calcium mineralization. Moreover, after one month subcutaneous implantation in vivo, α-structured coating elicited minimal, comparable inflammatory response. Additionally, in a rabbit femoral defect model, α-structured coating displayed a significant improvement on the generation of new-born bone and bonding between the new bone and the tissue, implying a rapid and durable osteointegration. Expectedly, this optimized structure-controlled SF-based coating can be an alternative and prospective solution for the current challenges in orthopedics. STATEMENT OF SIGNIFICANCE: In this study, an AgNPs/Gentamycin-loaded structured-controlled silk fibroin coatings were constructed on Ti implant's surface to guarantee the success of implantation even in the face of bacterial infection. In comparison, the α-structured coating had the lowest content of β-sheets structure (19.0%) and the smallest particle size of AgNPs (~ 20 nm), and owned pH-responsive characteristic due to reversible α-helices structural. Thanks to pH-responsive release of Ag⁺, the α-structure coating could effectively inhibit adhesive bacteria and kill planktonic bacteria by releasing a large amount of reactive oxygen radicals. Through in vitro biological results (cell proliferation, differentiation and osteogenic gene expression) and in vivo rabbit femur implantation results, the α-structure coating had good biocompatible and osteogenic properties.

A Multifunctional Antibacterial and Osteogenic Nanomedicine: QAS-Modified Core-Shell Mesoporous Silica Containing Ag Nanoparticles

Treatments for infectious bone defects such as periodontitis require antibacterial and osteogenic differentiation capabilities. Nanotechnology has prompted the development of multifunctional material. In this research, we aim to synthesize a nanoparticle that can eliminate periodontal pathogenic microorganisms and simultaneously stimulate new bone tissue regeneration and mineralization. QAS-modified core-shell mesoporous silica containing Ag nanoparticles (Ag@QHMS) was successfully synthesized through the classic hydrothermal method and surface quaternary ammonium salt functionalization. The Ag@QHMS in vitro antibacterial activity was explored via coculture with Staphylococcus aureus, Escherichia coli, and Porphyromonas gingivalis biofilms. Bone mesenchymal stem cells (BMSCs) were selected for observing cytotoxicity, apoptosis, and osteogenic differentiation. Ag@QHMS showed a good sustained release profile of Ag⁺ and a QAS-grafted mesoporous structure. Compared with the single-contact antibacterial activity of QHMS, Ag@QHMS exhibited a more efficient and stable concentration-dependent antimicrobial efficacy; the minimum inhibitory concentration was within 100 μg/ml, which was below the BMSC biocompatibility concentration (200 μg/ml). Thus, apoptosis would not occur while promoting the increased expression of osteogenic-associated factors, such as runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN), bone sialoprotein (BSP), and collagen type 1 (COL-1). A safe concentration of particles can stimulate cell alkaline phosphatase and matrix calcium salt deposition. The dual antibacterial effect from the direct contact killing of QAS and the sustained release of Ag nanoparticles, along with the Ag-promoted osteogenic differentiation, had been verified and utilized in Ag@QHMS. This system demonstrates the potential for utilizing pluripotent biomaterials to treat complex lesions.

Durable and Effective Antibacterial Cotton Fabric Collaborated with Polypropylene Tissue Mesh for Abdominal Wall Defect Repair

A feasible, efficient antibacterial and anti-infective mesh for clinical abdominal wall defect repair is significant, but challenging due to the complexity of the postoperative wound environment. Herein, a simple strategy was provided to construct woven cotton fabric modified with gentamicin (Gem) via the enamine bonds. The obtained cotton fabric possessed favorable antibacterial properties against E. coli and S. aureus with the bactericidal rate of over 99.99% and could be combined with a commercial polypropylene (PP) mesh to serve as a two-layer composite mesh for abdominal wall defect repair. The antibacterial cotton layer was systematically characterized by FTIR, XPS, SEM, EDS, and mechanical measurements. The C2C12 cells and human fibroblasts were employed to assess the cytocompatibility of the composite mesh in vitro. Furthermore, the rat abdominal wall defect model was used to evaluate the efficacy of antibacterial and anti-infection properties. It was demonstrated that the two-layer composite mesh possessed favorable biocompatibility and satisfactory anti-infection properties involved in abdominal wall defect repair. Therefore, this synergetic two-layer composite mesh would out-perform surgical PP meshes in preventing infectious complications.

Poly-l-lysine/Sodium Alginate Coating Loading Nanosilver for Improving the Antibacterial Effect and Inducing Mineralization of Dental Implants

In recent years, antibacterial surface modification of titanium (Ti) implants has been widely studied in preventing implant-associated infection for dental and orthopedic applications. The purpose of this study was to prepare a composite coating on a porous titanium surface for infection prevention and inducing mineralization, which was initialized by deposition of a poly-l-lysine (PLL)/sodium alginate(SA)/PLL self-assembled coating, followed by dopamine deposition, and finally in situ reduction of silver nanoparticles (AgNPs) by dopamine. The surface zeta potential, SEM, XPS, UV-vis, and water contact angle analyses demonstrate that each coating was successfully prepared after the respective steps and that the average sizes of AgNPs were 20-30 nm. The composite coating maintained Ag⁺ release for more than 27 days in PBS and induced mineralization when incubated in SBF. The antibacterial results showed that the composite coating inhibited/killed bacteria on the material surface and killed bacteria around them. In addition, although this coating inhibited the initial adhesion of osteoblasts, the mineralized surface greatly enhanced the cytocompatibility. Thus, we concluded that the composite coating could prevent bacterial infections and facilitate mineralization in vivo in the early postoperative period, and then, the mineralized surface could enhance the cytocompatibility.

Sustainable release of vancomycin from micro-arc oxidised 3D-printed porous Ti6Al4V for treating methicillin-resistant Staphylococcus aureus bone infection and enhancing osteogenesis in a rabbit tibia osteomyelitis model

Elimination of infection and enhancement of osteogenesis by orthopaedic implants are two critical factors in the treatment of complex bone infections. A prolonged and expensive procedure requiring two surgical steps and a 6-8-week period of joint immobilisation is utilised as a primary treatment for revision arthroplasty of an infected prosthesis, greatly affecting long-term patient care for the ageing population. Here, we evaluated the effects of vancomycin-loaded in micro-arc oxidised (MAO) three-dimensional (3D) printed porous Ti6Al4V scaffolds on osteogenesis. This system showed a high loading capacity and sustained vancomycin release kinetics, as demonstrated using high-performance liquid chromatography. In vivo, 0.1 mL of 10⁸ colony forming units (CFU) methicillin-resistant Staphylococcus aureus was injected into the tibias of rabbits to induce severe osteomyelitis. Physical, haematological, radiographic, microbiological, and histopathological analyses were performed to evaluate the effects of treatment. Rabbits with vancomycin-loaded in MAO scaffolds showed the inhibition of bone infection and enhancement of osteogenesis, resulting in better outcomes than in the other groups. Overall, these findings demonstrated the potential of this 3D printed porous Ti6Al4V, with good osteogenesis and sustained vancomycin release properties, for application in the treatment of complex bone infections.

The Antibacterial Mechanism of Silver Nanoparticles and Its Application in Dentistry

Nanotechnology has recently emerged as a rapidly growing field with numerous biomedical science applications. At the same time, silver has been adopted as an antimicrobial material and disinfectant that is relatively free of adverse effects. Silver nanoparticles possess a broad spectrum of antibacterial, antifungal and antiviral properties. Silver nanoparticles have the ability to penetrate bacterial cell walls, changing the structure of cell membranes and even resulting in cell death. Their efficacy is due not only to their nanoscale size but also to their large ratio of surface area to volume. They can increase the permeability of cell membranes, produce reactive oxygen species, and interrupt replication of deoxyribonucleic acid by releasing silver ions. Researchers have studied silver nanoparticles as antimicrobial agents in dentistry. For instance, silver nanoparticles can be incorporated into acrylic resins for fabrication of removable dentures in prosthetic treatment, composite resin in restorative treatment, irrigating solution and obturation material in endodontic treatment, adhesive materials in orthodontic treatment, membrane for guided tissue regeneration in periodontal treatment, and titanium coating in dental implant treatment. Although not all authorities have acknowledged the safety of silver nanoparticles, no systemic toxicity of ingested silver nanoparticles has been reported. A broad concern is their potential hazard if they are released into the environment. However, the interaction of nanoparticles with toxic materials and organic compounds can either increase or reduce their toxicity. This paper provides an overview of the antibacterial use of silver nanoparticles in dentistry, highlighting their antibacterial mechanism, potential applications and safety in clinical treatment.

Regulation of MSC and macrophage functions in bone healing by peptide LL-37-loaded silk fibroin nanoparticles on a titanium surface

Titanium-based materials have been long regarded as effective bone implants for clinical use, yet the corresponding osteointegration ability needs to be optimized. This challenge can be overcome by fabricating titanium (Ti) materials with physiological functions. In this study, peptide LL-37-loaded silk fibroin nanoparticles (SFNPs) were immobilized on a titanium surface to facilitate osteointegration by regulating the physiological functions of mesenchymal stem cells (MSCs) and macrophages. According to our results, the cell viability, recruitment and paracrine responses of MSCs and macrophages were improved by the modified Ti samples. MSC differentiation was promoted by the macrophages incubated on the modified Ti samples, and the phenotype switch of macrophages was also modulated by the MSCs incubated on the modified Ti samples. In vivo studies proved that the modified Ti implant induced MSC and macrophage recruitments to injury sites and the inflammatory response was positively regulated. Moreover, better bone formation was achieved around the modified Ti implant 28 days after surgery. This suggested that the immobilization of peptide LL-37-loaded SFNPs on a titanium surface improves osteointegration via the regulation of physiological functions of MSCs and macrophages.

Advances in biomolecule inspired polymeric material decorated interfaces for biological applications

With the development of surface modification technology, interface properties have great effects on the interaction between biomedical materials and cells and biomolecules, which significantly affects the biocompatibility and functionality of materials. As an orderly and perfect system, biological organisms in nature effectively integrate all kinds of bio-interfaces with physiological functions, which shed light on the importance of biomolecules in organisms. It gives birth to a bio-inspiration strategy to design and fabricate smart materials with specific functionalities, e.g. osteogenic and chondrocytic induced materials inspired by bone sialoprotein and chondroitin sulfate. Through this mimicking approach, various functional materials were utilized to decorate the interfaces and further optimize the performance of biomedical materials, which would widely expand their applications. In this review, followed by a summary and brief introduction of surface modification methods, we highlight recent advances in the fabrication of functional polymeric materials inspired by a range of biomolecules for decorating interfaces. Then, the other applications of biomolecule inspired materials including tissue engineering, diagnosis and treatment of diseases and physiological function regulation are presented and the future outlook is discussed as well.

Effect of Bifunctional β Defensin 2-Modified Scaffold on Bone Defect Reconstruction

Bone tissue engineering has emerged as an effective alternative treatment to the problem of bone defect. To repair a bone defect, antibiosis and osteogenesis are two essential aspects of the repair process. By searching the literature and performing exploratory experiments, we found that β defensin 2 (BD2), with bifunctional properties of antibiosis and osteogenesis, was a feasible alternative for traditional growth factors. The antimicrobial ability of BD2 against Staphylococcus aureus and Escherichia coli was studied by the spread plate and live/dead staining methods (low effective concentration of 20 ng/mL). BD2 was also demonstrated to enhance osteogenesis, with higher messenger RNA (mRNA) and protein expression of the osteogenic markers collagen I (Col1), runt-related transcription factor 2 (Runx2), osteopontin (Opn), and osteocalcin (Ocn) in vitro (1.5-2.5-fold increase compared with the control group in the most effective concentration group), which was consistent with the alkaline phosphatase (ALP) and alizarin red S (ARS) staining results. We implanted poly(sebacoyl diglyceride) (PSeD) combined with BD2 and rat bone tissue-derived mesenchymal stem cells (rBMSCs) under the back skin of rats and found that the inflammatory response was significantly lower with this combination than with the PSeD/rBMSCs scaffold without BD2 and the pure PSeD group and was similar to the control group. Importantly, when assessed in a critical-sized in vivo rat 8 m diameter calvaria defect model, a scaffold we developed combining bifunctional BD2 with porous organic polymer displayed an osteogenic effect that was 160-200% greater than the control group. The in vivo study results revealed a significant osteogenic response and antimicrobial effect and were consistent with the in vitro results. In summary, BD2 displayed a great potential of simultaneously promoting bone regeneration and preventing infection and could provide a viable alternative to traditional growth factors applied in bone defect repair.

Rapid construction of polyetheretherketone (PEEK) biological implants incorporated with brushite (CaHPO4·2H2O) and antibiotics for anti-infection and enhanced osseointegration

Polyetheretherketone (PEEK) is an ideal implant material for orthopedic and dental application due to its high biocompatibility and mechanical property. However, biological inertness of PEEK hinders the effective clinical applications in treating bone defect, especially in the situation accompanied by bacterial infection. In this study, a layer-by-layer (LBL) deposition method with controlled cycles was developed to rapidly construct brushite (CaHPO₄·2H₂O) (CaP) layers containing gentamicin sulfate (GS) on PEEK to obtain CaP-and-GS modified PEEK, named as PEEK/CaP-GS. Different PEEK/CaP-GS, like PEEK/CaP-GS*3, PEEK/CaP-GS*6 and PEEK/CaP-GS*9 were conveniently prepared by repeating the LBL cycles to 3, 6 and 9 times, respectively. The morphology, structure and surface property of the fabricated PEEK/CaP-GS were carefully characterized. In vitro antibacterial experiments illustrated that all of the PEEK/CaP-GS samples had excellent and sustained antibacterial property. Cell proliferation experiments revealed the acceptable biocompatibility and cell osteogenic differentiation of PEEK/CaP-GS, especially in PEEK/CaP-GS*6. X-ray, μ-CT, and histological analysis showed that PEEK/CaP-GS exhibited in vivo antibacterial activity and osseointegration ability in the treatment of bone defect with infection. In both the in vitro and the in vivo experiments, PEEK/CaP-GS*6 prepared from the 6 LBL cycles exhibited the best antibacterial and osseointegration ability for bone healing. This work opens new avenue of the facile and effective modification of PEEK with special biological functions for clinical application, especially for the implants requiring excellent antibacterial and osseointegration ability.

Surface modified electrospun poly(lactic acid) fibrous scaffold with cellulose nanofibrils and Ag nanoparticles for ocular cell proliferation and antimicrobial application

Corneal and conjunctival infections are common ocular diseases, sometimes, causing severe and refractory drug-resistant bacteria infections. Fungal keratitis is a leading cause for blindness and traditional medical treatment is unsatisfactory. Thus, there is an urge to develop a new therapy to deal with these cases. In this study, we developed surface modified poly(lactic acid) (PLA) electrospun nanofibrous membranes (EFMs) with silver nanoparticles (AgNPs) and cellulose nanofibrils (CNF) as scaffolds for cell proliferation and antimicrobial application. The AgNPs with a very low content (below 0.1%) were easily anchored on the surface of PLA EFMs by CNF, which endowed the scaffold with hydrophilicity and antibacterial ability. The in-vitro cell co-culture experiments showed that the scaffold had great biocompatibility to ocular epithelial cells, especially the scaffolds coated by CNF, which significantly proliferated cells. Furthermore, the antibacterial activity could reach >95% inhibiting Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) due to the implantation of AgNPs, and the antifungal activity was also outstanding with most of the Fusarium spp. inhibited. Hence, the developed PLA EFMs with CNF and AgNPs are promising ocular bandages to promote cell proliferation and kill infectious pathogens, exhibiting potential applications in ocular wound healing in the future.

Photo-responsive chitosan/Ag/MoS2 for rapid bacteria-killing

Bacterial infection is a serious problem threatening human health. The chitosan (CS)-modified MoS₂ coating loaded with silver nanoparticles (Ag NPs) was designed on the surface of titanium (Ti) to kill bacteria rapidly and efficiently under 660 nm visible light. Ag/MoS₂ exhibited high photocatalytic activity due to the rapid transfer of photo-inspired electrons from MoS₂ to Ag NPs, resulting in higher yields of radical oxygen species (ROS) to kill bacteria. The covering of CS made the composite coating positively charged to further enhance the antibacterial property of the coating. In addition, CS/Ag/MoS₂-Ti also showed a certain photothermal effect. in vitro results showed that the antibacterial efficiency of the coating on Staphylococcus aureus and Escherichia coli was 98.66% and 99.77% respectively, when the coating was irradiated by 660 nm visible light for 20 min. Cell culture tests showed that CS/Ag/MoS₂-Ti had no adverse effects on cell growth. Hence, this surface system will be a very promising strategy for eliminating bacterial infection on biomedical device and implants safely and effectively within a short time.

Micro- and Nanopatterned Silk Substrates for Antifouling Applications

A major problem of current biomedical implants is the bacterial colonization and subsequent biofilm formation, which seriously affects their functioning and can lead to serious post-surgical complications. Intensive efforts have been directed toward the development of novel technologies that can prevent bacterial colonization while requiring minimal antibiotics doses. To this end, biocompatible materials with intrinsic antifouling capabilities are in high demand. Silk fibroin, widely employed in biotechnology, represents an interesting candidate. Here, we employ a soft-lithography approach to realize micro- and nanostructured silk fibroin substrates, with different geometries. We show that patterned silk film substrates support mammal cells (HEK-293) adhesion and proliferation, and at the same time, they intrinsically display remarkable antifouling properties. We employ Escherichia coli as representative Gram-negative bacteria, and we observe an up to 66% decrease in the number of bacteria that adhere to patterned silk surfaces as compared to control, flat silk samples. The mechanism leading to the inhibition of biofilm formation critically depends on the microstructure geometry, involving both a steric and a hydrophobic effect. We also couple silk fibroin patterned films to a biocompatible, optically responsive organic semiconductor, and we verify that the antifouling properties are very well preserved. The technology described here is of interest for the next generation of biomedical implants, involving the use of materials with enhanced antibacterial capability, easy processability, high biocompatibility, and prompt availability for coupling with photoimaging and photodetection techniques.