Rational Design of S-UiO-66@GO Hybrid Nanosheets for Proton Exchange Membranes with Significantly Enhanced Transport Performance

Functionalized 2D membranes for separations at the 1-nm scale

The ongoing evolution of two-dimensional (2D) material-based membranes has prompted the realization of mass separations at the 1-nm scale due to their well-defined selective nano- and subnanochannels. Strategic membrane functionalization is further found to be key to augmenting channel accuracy and efficiency in distinguishing ions, gases and molecules within this range and is thus trending as a research focus in energy-, resource-, environment- and pharmaceutical-related applications. In this review, we present the fundamentals underpinning functionalized 2D membranes in various separations, elucidating the critical "method-interaction-property" relationship. Starting with an introduction to various functionalization strategies, we focus our discussion on functionalization-induced channel-species interactions and reveal how they shape the transport- and operation-related features of the membrane in different scenarios. We also highlight the limitations and challenges of current functionalized 2D membranes and outline the necessary breakthroughs needed to apply them as reliable and high-performance separation units across industries in the future.

Enhancing electrochemical properties of a two-dimensional zeolitic imidazole framework by incorporating a conductive polymer for dopamine detection

The zeolitic imidazole framework with a leaf-shaped morphology (ZIF-L) has a wide range of promising applications in gas storage, battery materials, catalytic reactions, and optoelectronic devices due to its planar leaf-like structure and large surface area. However, the low conductivity, weak catalytic activity, and poor stability in the water dielectric medium of ZIF-L limit its further practical application. To solve these problems, we added the conductive polymer heterocyclic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) to ZIF-L for the sensitive detection of dopamine (DA). The synthesized composite ZIF-L/PEDOT:PSS (ZIF-L/PEDOT) not only retained the surface morphology of ZIF-L but also exhibited excellent electrochemical properties. The higher electrical conductivity of ZIF-L/PEDOT than that of ZIF-L was due to the enhanced electron transfer at the interface between ZIF-L and PEDOT:PSS. As a result, we developed an electrochemical biosensor based on the ZIF-L/PEDOT composite, which has a limit of detection of 7 nM for DA and a wide linear range from 25 nM to 500 μM. Furthermore, the current drop was negligible after 28 days, proving that the biosensor has excellent stability. Based on the above-mentioned outstanding performance, the ZIF-L/PEDOT-based biosensor was successfully used to detect DA in human serum samples. These results demonstrated that ZIF-L/PEDOT is expected to play an essential role in disease detection.

Enhanced performance of nanocomposite membrane developed on sulfonated poly (1, 4-phenylene ether-ether-sulfone) with zeolite imidazole frameworks for fuel cell application

Proton exchange membrane fuel cells (PEMFC) have received a lot of interest and use metal-organic frameworks (MOF)/polymer nanocomposite membranes. Zeolite imidazole framework-90 (ZIF-90) was employed as an addition in the sulfonated poly (1, 4-phenylene ether-ether-sulfone) (SPEES) matrix in order to investigate the proton conductivity in a novel nanocomposite membrane made of SPEES/ ZIF. The high porosity, free surface, and presence of the aldehyde group in the ZIF-90 nanostructure have a substantial impact on enhancing the mechanical, chemical, thermal, and proton conductivity capabilities of the SPEES/ZIF-90 nanocomposite membranes. The results indicate that the utilization of SPEES/ZIF-90 nanocomposite membranes with 3wt% ZIF-90 resulted in enhanced proton conductivity of up to 160 mS/cm at 90 °C and 98% relative humidity (RH). This is a significant improvement compared to the SPEES membrane which exhibited a proton conductivity of 55 mS/cm under the same conditions, indicating a 1.9-fold increase in performance. Furthermore, the SPEES/ZIF-90/3 membrane exhibited a remarkable 79% improvement in maximum power density, achieving a value of 0.52 W/cm² at 0.5 V and 98% RH, which is 79% higher than that of the pristine SPEES membrane.

A mesoporous graphene @ zirconium-based metal–organic frameworks as a matrix and an adsorbent for steroid detection using surface-assisted laser desorption/ionization time-of-flight mass spectrometry

Endocrine-disrupting chemicals (EDCs) in environmental water samples, a rapid, sensitive, and high-throughput method should be developed. In this study, an in situ-synthesized composite material of three-dimensional mesoporous graphene (3D-MG) and zirconium-based metal-organic frameworks (MOFs), denoted as MG@UiO-66, was used as both the adsorbent and matrix in surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) for steroid detection. Both graphene-based materials and MOFs have proven to be ineffective in detecting steroids as a matrix; however, their composites can detect steroids with higher sensitivity and lower interference. After screening different types of MOFs, a composite of UiO-66 and 3D-MG was selected as the new matrix for steroid detection. The combination of 3D-MG and UiO-66 further enhanced the ability of the material to enrich steroids, and reduced the limit of detection (LOD) of steroids. The method was evaluated for linearity, LODs, limit of quantitation (LOQs), reproducibility, and precision under optimized conditions. The results showed that the linear relationships of three steroids are kept in the range of 0-300 nM/L with a correlation coefficient r ≥ 0.97. The LODs and LOQs of the steroids were in the range of 3-15 and 10-20 nM/L, respectively. Recoveries (n = 5) of 79.3-97.2% were obtained at three spiked levels in the blank water samples. This fast and efficient method of using SALDI-TOF MS can be extended to detect the steroids in EDCs in environmental water samples.

Water Electrolysis toward Elevated Temperature: Advances, Challenges and Frontiers

Since severe global warming and related climate issues have been caused by the extensive utilization of fossil fuels, the vigorous development of renewable resources is needed, and transformation into stable chemical energy is required to overcome the detriment of their fluctuations as energy sources. As an environmentally friendly and efficient energy carrier, hydrogen can be employed in various industries and produced directly by renewable energy (called green hydrogen). Nevertheless, large-scale green hydrogen production by water electrolysis is prohibited by its uncompetitive cost caused by a high specific energy demand and electricity expenses, which can be overcome by enhancing the corresponding thermodynamics and kinetics at elevated working temperatures. In the present review, the effects of temperature variation are primarily introduced from the perspective of electrolysis cells. Following an increasing order of working temperature, multidimensional evaluations considering materials and structures, performance, degradation mechanisms and mitigation strategies as well as electrolysis in stacks and systems are presented based on elevated temperature alkaline electrolysis cells and polymer electrolyte membrane electrolysis cells (ET-AECs and ET-PEMECs), elevated temperature ionic conductors (ET-ICs), protonic ceramic electrolysis cells (PCECs) and solid oxide electrolysis cells (SOECs).

Graphene oxide-based novel MOF nanohybrid for synergic removal of Pb (II) ions from aqueous solutions: Simulation and adsorption studies

Heavy metals represent a considerable threat, and the current study deals with synthesizing a novel MOF nanocomposite by intercalating graphene oxide (GO) and linker UiO-66-NDC. It was shown that UiO-66-NDC/GO had enhanced the removal efficiency of Pb (II) ions at pH 6. The adsorption kinetics data followed the PSO (Type 2) representing chemisorption. Adsorption data were also fitted with three different isotherms, namely Temkin, Freundlich, & Langmuir, and the Temkin model exhibited the best correlation (R² 0.99), representing the chemisorption nature of the adsorption process. The maximum adsorption capacity (qmax) of Pb (II) ions using Langmuir was found to be 254.45 mg/g (298 K). The Pb (II) adsorption process was confirmed to be exothermic and spontaneous as the thermodynamic parameters H° and G° were determined to have negative values. MOF nanocomposite also represents significant reusability for up to four regeneration cycles using 0.01 M HCl; for the next four, it works quite efficiently after regeneration. Meanwhile, the simulation findings confirm the superior dynamic stability (∼08 times) of the MOF nanocomposite as compared to the GO system. The removal of Pb (II) from simulated wastewater samples using a super nano-adsorbent using a MOF nanocomposite is described here for the first time.

Rationalizing Structural Hierarchy in the Design of Fuel Cell Electrode and Electrolyte Materials Derived from Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are arguably a class of highly tuneable polymer-based materials with wide applicability. The arrangement of chemical components and the bonds they form through specific chemical bond associations are critical determining factors in their functionality. In particular, crystalline porous materials continue to inspire their development and advancement towards sustainable and renewable materials for clean energy conversion and storage. An important area of development is the application of MOFs in proton-exchange membrane fuel cells (PEMFCs) and are attractive for efficient low-temperature energy conversion. The practical implementation of fuel cells, however, is faced by performance challenges. To address some of the technical issues, a more critical consideration of key problems is now driving a conceptualised approach to advance the application of PEMFCs. Central to this idea is the emerging field MOF-based systems, which are currently being adopted and proving to be a more efficient and durable means of creating electrodes and electrolytes for proton−exchange membrane fuel cells. This review proposes to discuss some of the key advancements in the modification of PEMs and electrodes, which primarily use functionally important MOFs. Further, we propose to correlate MOF-based PEMFC design and the deeper correlation with performance by comparing proton conductivities and catalytic activities for selected works.

Comparative Studies on the Proton Conductivities of Hafnium-Based Metal-Organic Frameworks and Related Chitosan or Nafion Composite Membranes

Hafnium (Hf)-based UiO-66 series metal-organic frameworks (MOFs) have been widely studied on gas storage, gas separation, reduction reaction, and other aspects since they were first prepared in 2012, but there are few studies on proton conductivity. In this work, one Hf-based MOF, Hf-UiO-66-fum showing UiO-66 structure, also known as MOF-801-Hf, was synthesized at room temperature using cheap fumaric acid as the bridging ligand, and then imidazole units were successfully introduced into MOF-801-Hf to obatin a doped product, Im@MOF-801-Hf. Note that both MOF-801-Hf and Im@MOF-801-Hf demonstrate excellent thermal, water, and acid-base stabilities. Expectedly, the maximum proton conductivity (σ) of Im@MOF-801-Hf (1.46 × 10^-2 S·cm^-1) is nearly 4 times greater than that of MOF-801-Hf (3.98 × 10^-3 S·cm^-1) under 100 °C and 98% relative humidity (RH). To explore their possible practical application value, we doped them into chitosan (CS) or Nafion membranes as fillers, namely, CS/MOF-801-Hf-X, CS/Im@MOF-801-Hf-Y, and Nafion/MOF-801-Hf-Z (X, Y, and Z are the doping percentages of MOF in the membrane, respectively). Intriguingly, it was found that CS/MOF-801-Hf-6 and CS/Im@MOF-801-Hf-4 indicated the highest σ values of 1.73 × 10^-2 and 2.14 × 10^-2 S·cm^-1, respectively, under 100 °C and 98% RH and Nafion/MOF-801-Hf-9 also revealed a high σ value of 4.87 × 10^-2 S·cm^-1 under 80 °C and 98% RH, which showed varying degrees of enhancement compared to the original MOFs or pure CS and Nafion membranes. Our study illustrates that these Hf-based MOFs and related composite membranes offer great potential in electrochemical fields.

Preparation and characterization of a newly constructed multifunctional Co(ii)–organic framework: proton conduction and adsorption of Congo red in aqueous medium

The efficient adsorption of CR over Co-MOF 1 as well as the pH-dependent proton-conducting mechanism of the composite Co-MOF–Nafion membrane.

Porosity regulation of metal-organic frameworks for high proton conductivity by rational ligand design: mono- versus disulfonyl-4,4′-biphenyldicarboxylic acid

Porous crystalline metal-organic frameworks (MOFs) bearing sulfonic groups (–SO3H) are receiving increasing attention as solid-state proton-conductors because the –SO3H group can not only enhance the proton concentration but also form...

Exploring the Role of Cluster Formation in UiO Family Hf Metal-Organic Frameworks with in Situ X-ray Pair Distribution Function Analysis

The structures of Zr and Hf metal-organic frameworks (MOFs) are very sensitive to small changes in synthetic conditions. One key difference affecting the structure of UiO MOF phases is the shape and nuclearity of Zr or Hf metal clusters acting as nodes in the framework; although these clusters are crucial, their evolution during MOF synthesis is not fully understood. In this paper, we explore the nature of Hf metal clusters that form in different reaction solutions, including in a mixture of DMF, formic acid, and water. We show that the choice of solvent and reaction temperature in UiO MOF syntheses determines the cluster identity and hence the MOF structure. Using in situ X-ray pair distribution function measurements, we demonstrate that the evolution of different Hf cluster species can be tracked during UiO MOF synthesis, from solution stages to the full crystalline framework, and use our understanding to propose a formation mechanism for the hcp UiO-66(Hf) MOF, in which first the metal clusters aggregate from the M₆ cluster (as in fcu UiO-66) to the hcp-characteristic M₁₂ double cluster and, following this, the crystalline hcp framework forms. These insights pave the way toward rationally designing syntheses of as-yet unknown MOF structures, via tuning the synthesis conditions to select different cluster species.

Two-dimensional metal-organic framework-graphene oxide hybrid nanocomposite proton exchange membranes with enhanced proton conduction

A novel two-dimensional (2D) zeolitic imidazolate framework-graphene oxide hybrid nanocomposite (ZIF-L@GO) is designed as an inorganic filler in sulfonated poly(ether ether ketone) (SPEEK). ZIF-L with unique leaf-like morphology is grown in-situ on the GO sheet in aqueous media at room temperature. The terminal imidazole linker in ZIF-L@GO and the -SO₃H in SPEEK can form acid-base pairs in the membrane interface to produce low energy proton conduction highway. Benefiting from the unique structural advantage, the hybrid SP-ZIF-L@GO membranes displayed promoted physicochemical and electrochemical performances over the pure SPEEK. The SP-ZIF-L@GO-5 achieved a proton conductivity of 0.265 and 0.0364 S cm^-1 at 70 °C-100% RH and 90 °C-40% RH, 1.76- and 6.24-fold higher than pure SPEEK, respectively. Meanwhile, a single cell based on SP-ZIF-L@GO-5 had an output power up to 652.82 mW cm^-2 at 60 °C, 1.45 times higher than the pure SPEEK. In addition, the durability test was performed by holding open circuit voltage (OCV) for 24 h. The SP-ZIF-L@GO-5 provided better long-term stability than the pure SPEEK. These superior performance suggests a promising application in PEMFC.

Engineering of Interfacial Energy Bands for Synthesis of Photoluminescent 0D/2D Coupled MOF Heterostructure with Enhanced Selectivity toward the Proton-Exchange Membrane

Engineering of the interface for tuning the structural, functional, and electronic properties of materials via the formation of heterostructure composites exhibits immense potential in the current research scenario. This study reports a novel ternary composite synthesized by decoration of zero-dimensional Pd nanoparticles (NPs) and two-dimensional (2D) graphite oxide (GO) sheets in the UiO-66 metal-organic framework (MOF). A mixed matrix membrane was fabricated by incorporating this composite in the SPEEK polymer matrix, which exhibited higher selectivity compared to commercial Nafion 117. The synthesized composite and fabricated membranes were thoroughly characterized in terms of their chemical structures, microstructural morphologies, physicochemical, thermal, photo-electrochemical, and optical properties, ion-exchange capacity, proton conductivity, and methanol permeability. As per our knowledge, this is the first study which explores the effect of noble metal NPs and carbon 2D material simultaneously on the electronic structure of the MOF, resulting in improved selectivity. The electron-accepting nature of GO and surface plasmon resonance effect of Pd alter the energy band positions and scavenge the electrons, improving the proton conduction of the composite. The introduction of oxygen vacancies in lattice leads to efficient charge separation. The formation of a Schottky junction results in the localized electric field effect due to electron density fluctuation which aids in ion transport. The current study opens up a new route to overcome the major challenge associated with direct methanol fuel cells (DMFCs), that is, high/low methanol crossover by improving the proton conduction.

Natural Polymers Decorated MOF-MXene Nanocarriers for Co-delivery of Doxorubicin/pCRISPR

A one-pot and facile method with assistance of high gravity was applied for the synthesis of inorganic two-dimensional MOF-5 embedded MXene nanostructures. The innovative inorganic MXene/MOF-5 nanostructure was applied in co-delivery of drug and gene, and to increase its bioavailability and interaction with the pCRISPR, the nanomaterial was coated with alginate and chitosan. The polymer-coated nanosystems were fully characterized, and the sustained DOX delivery and comprehensive cytotoxicity studies were conducted on the HEK-293, PC12, HepG2, and HeLa cell lines, demonstrating acceptable and excellent cell viability at both very low (0.1 μg.mL^-1) and high (10 μg·mL^-1) concentrations. The chitosan-coated nanocarriers showed superior relative cell viability compared to others, more than 60% on average of relative cell viability in all of the cell lines. Then, alginate-coated nanocarriers ranked at second place on the higher relative cell viability, more than 50% on average for all of the cell lines. Also, MTT results showed a complete dose-dependence, and by increasing the time of treatment from 24 to 72 h, the relative cell viability decreased by a meaningful slope; however, this decrease was optimized by coating the nanocarrier with chitosan and alginate. The nanosystems were also tagged with pCRISPR to analyze the potential application in the co-delivery of drug/gene. CLSM images of the HEK-293 and HeLa cell lines unveiled successful delivery of pCRISPR into the cells, and the enhanced green fluorescent protein (EGFP) reached up to ca. 26% for the HeLa cell line. Also, a considerable drug payload of 35.7% was achieved, which would be because of the interactions between the nanocarrier and the doxorubicin. In this unprecedented report pertaining to the synthesis of MXene assisted by a MOF and high-gravity technique, the methodology and the optimized ensuing MXene/MOF-5 nanosystems can be further developed for the co-delivery of drug/gene in animal models.

Enhanced proton transport properties of sulfonated polyarylene ether nitrile (SPEN) with moniliform nanostructure UiO-66-NH2/CNT

Metal-organic frameworks (MOFs) have been widely investigated for their porosity and functional diversity. Inspired by the flexible designability of MOFs, UiO-66-NH2/CNT with moniliform nanostructure was designed and synthesized successfully. SPEN@UiO-66-NH2/CNT composite proton exchange membranes were prepared by loaded UiO-66-NH2/CNT into sulfonated polyarylene ether nitrile (SPEN). Due to the addition of UiO-66-NH2/CNT, all the properties of composite proton exchange membranes were improved. The composite membranes exhibit excellent thermal stability and dimensional stability. The tensile strength of the composite membranes was improved about twofold compared to that of recast SPEN membrane, which was contributed by the interlaced property and rigid structure of UiO-66-NH2/CNT. Especially, the proton conductivity of the composite membranes was greatly facilitated by the additional proton acceptors and donors provided by the abundant amino groups and carboxyl groups in UiO-66-NH2/CNT. Furthermore, the methanol permeability of SPEN@UiO-66-NH2/CNT reduced consistently (from 6.13 to 0.96 × 10−7 cm2 s−1), which was much lower than that of Nafion membrane (21.36 × 10−7 cm2 s−1). All the results suggest that the design of multifunctional nanofillers based on the skeleton structure of MOFs could provide a new strategy to enhance the performance of PEMs.

Varied proton conductivity and photoreduction CO2 performance of isostructural heterometallic cluster based metal–organic frameworks

A family of isostructural heterometallic MOFs based on Fe2M clusters serve as potential proton conductors and photocatalysts for CO2 photoreduction.

Stable Forward Osmosis Nanocomposite Membrane Doped with Sulfonated Graphene Oxide@Metal-Organic Frameworks for Heavy Metal Removal

A sulfonated graphene oxide@metal-organic framework-modified forward osmosis nanocomposite (SGO@UiO-66-TFN) membrane was developed to improve stability and heavy metal removal performance. An in situ growth method was applied to uniformly distribute UiO-66 nanomaterial with a frame structure on SGO nanosheets to form SGO@UiO-66 composite nanomaterial. This nanomaterial was then added to a polyamide layer using interfacial polymerization. The cross-linking between SGO@UiO-66 and m-phenylenediamine improved the stability of the nanomaterial in the membrane. Additionally, the water permeability was improved because of additional water channels introduced by SGO@UiO-66. SGO, with its lamellar structure, and UiO-66, with its frame structure, made the diffusion path of the solute more circuitous, which improved the heavy metal removal and salt rejection performances. Moreover, the hydrophilic layer of the SGO@UiO-66-TFN membrane could block contaminants and loosen the structure of the pollution layer, ensuring that the membrane maintained a high removal rate. The water flux and reverse solute flux of the SGO@UiO-66-TFN membrane reached 14.77 LMH and 2.95 gMH, and compared with the thin-film composite membrane, these values were increased by 41 and 64%, respectively. The membrane also demonstrated a good heavy metal ion removal performance. In 2 h, the heavy metal ion removal rate (2000 ppm Cu²⁺ and Pb²⁺) was greater than 99.4%, and in 10 h the removal rate was greater than 97.5%.

Highly Conductive Polybenzimidazole Membranes at Low Phosphoric Acid Uptake with Excellent Fuel Cell Performances by Constructing Long-Range Continuous Proton Transport Channels Using a Metal-Organic Framework (UIO-66)

Phosphoric acid (PA)-doped polybenzimidazoles generally require high PA doping levels to achieve high conductivity as high-temperature proton exchange membranes. However, high PA doping levels result in a significant decrease in the mechanical properties of and PA leaching from the membranes. Herein, a Zr-based metal-organic framework material (UIO-66) was introduced into poly[2,2'-(p-oxydiphenylene)-5,5'-benzimidazole] (OPBI) membranes. The composite membranes exhibited long-range continuous proton transport channels when the mass ratio of UIO-66 to OPBI was ≥30 wt %. The long-range continuous proton transport channels endowed the composite membranes with high proton conductivity at low PA doping levels. When the doping of UIO-66 in the OPBI membrane reached 40 wt %, the membrane exhibited the highest proton conductivity (0.092 S cm^-1, at 160 °C) at a low PA uptake (73.25%), while the conductivity of the pristine OPBI membrane was 0.050 S cm^-1 with a high PA uptake (217.43%). Additionally, in the oxyhydrogen fuel cell test, 40%UIO-66@OPBI membranes exhibited excellent fuel cell performance with a peak power density of 583 mW cm^-2 at 160 °C, which is 50% higher than that of the pristine OPBI membrane (374 mW cm^-2). A single cell based on 40%UIO-66@OPBI also demonstrated good durability and could remain at about 600 mV after 500 h of operation under a constant load of 200 mA cm^-2.

Recent Progress in the Development of Composite Membranes Based on Polybenzimidazole for High Temperature Proton Exchange Membrane (PEM) Fuel Cell Applications

The rapid increasing of the population in combination with the emergence of new energy-consuming technologies has risen worldwide total energy consumption towards unprecedent values. Furthermore, fossil fuel reserves are running out very quickly and the polluting greenhouse gases emitted during their utilization need to be reduced. In this scenario, a few alternative energy sources have been proposed and, among these, proton exchange membrane (PEM) fuel cells are promising. Recently, polybenzimidazole-based polymers, featuring high chemical and thermal stability, in combination with fillers that can regulate the proton mobility, have attracted tremendous attention for their roles as PEMs in fuel cells. Recent advances in composite membranes based on polybenzimidazole (PBI) for high temperature PEM fuel cell applications are summarized and highlighted in this review. In addition, the challenges, future trends, and prospects of composite membranes based on PBI for solid electrolytes are also discussed.

Metal Organic Frameworks Modified Proton Exchange Membranes for Fuel Cells

Proton exchange membrane fuel cells (PEMFCs) have received considerable interest due to their low operating temperature and high energy conversion rate. However, their practical implement suffers from significant performance challenge. In particular, proton exchange membrane (PEM) as the core component of PEMFCs, have shown a strong correlation between its properties (e.g., proton conductivity, dimensional stability) and the performance of fuel cells. Metal-organic frameworks (MOFs) as porous inorganic-organic hybrid materials have attracted extensive attention in gas storage, gas separation and reaction catalysis. Recently, the MOFs-modified PEMs have shown outstanding performance, which have great merit in commercial application. This manuscript presents an overview of the recent progress in the modification of PEMs with MOFs, with a special focus on the modification mechanism of MOFs on the properties of composite membranes. The characteristics of different types of MOFs in modified application were summarized.

Metal and Covalent Organic Frameworks for Membrane Applications

Better and more efficient membranes are needed to face imminent and future scientific, technological and societal challenges. New materials endowed with enhanced properties are required for the preparation of such membranes. Metal and Covalent Organic Frameworks (MOFs and COFs) are a new class of crystalline porous materials with large surface area, tuneable pore size, structure, and functionality, making them a perfect candidate for membrane applications. In recent years an enormous number of articles have been published on the use of MOFs and COFs in preparation of membranes for various applications. This review gathers the work reported on the synthesis and preparation of membranes containing MOFs and COFs in the last 10 years. Here we give an overview on membranes and their use in separation technology, discussing the essential factors in their synthesis as well as their limitations. A full detailed summary of the preparation and characterization methods used for MOF and COF membranes is given. Finally, applications of these membranes in gas and liquid separation as well as fuel cells are discussed. This review is aimed at both experts in the field and newcomers, including students at both undergraduate and postgraduate levels, who would like to learn about preparation of membranes from crystalline porous materials.

Metal-Organic Frameworks as a Versatile Platform for Proton Conductors

Metal-organic frameworks (MOFs) are an intriguing type of crystalline porous materials that can be readily built from metal ions or clusters and organic linkers. Recently, MOF materials, featuring high surface areas, rich structural tunability, and functional pore surfaces, which can accommodate a variety of guest molecules as proton carriers and to systemically regulate the proton concentration and mobility within the available space, have attracted tremendous attention for their roles as solid electrolytes in fuel cells. Recent advances in MOFs as a versatile platform for proton conduction in the field of humidity condition proton-conduction, anhydrous atmosphere proton-conduction, single-crystal proton-conduction, and including MOF-based membranes for fuel cells, are summarized and highlighted. Furthermore, the challenges, future trends, and prospects of MOF materials for solid electrolytes are also discussed.

Metal-Organic Nanogel with Sulfonated Three-Dimensional Continuous Channels as a Proton Conductor

Developing novel proton conductors is crucial to the electrochemical technology for energy conversion and storage. Metal-organic frameworks (MOFs), with a highly ordered and controllable structure, have been widely explored to prepare high-performance proton conductors. Albeit the prominent merits and great potential of the MOF-based materials such as MOF pellets or composite polymer electrolytes, constructing well-defined proton-transfer channels with much lower grain boundary resistance and more homogeneous distribution deserves extensive explorations. Herein, a kind of nanostructured metal-organic gel (MOG) with a three-dimensional (3D) interconnected proton-conductive network is prepared by a facile sol-gel method using Cr³⁺ and sulfonated terephthalic as the metal source and organic ligand, respectively. During the gelation process, the primary metal-organic nanoparticles are cross-linked through mismatched growth and aggregate into the 3D well-percolated gel network. The resultant MOG features in the tunable hierarchical structure and long-range continuous proton-transfer channels, leading to remarkably reduced energy barrier for proton conduction. Attributed to the sulfonated ligand and well-interconnected proton-conductive pathways, MOG exhibits intrinsic proton conductivity that is about one order of magnitude higher than that of MIL-101-SO₃H pellet (MIL, Matérial Institut Lavoisier). The method in this study can be extended to construct long-range continuous ionic channels for a number of solid electrolytes.

Enhanced properties of sulfonated polyether ether ketone proton exchange membrane by incorporating carboxylic-contained zeolitic imidazolate frameworks

Carboxylic-containing zeolitic imidazolate frameworks (ZIF-COOH) showed an obvious improvement in the performance of sulfonated polyether ether ketone (SPEEK)-based proton exchange membranes.

Proton conductive Zr-based MOFs

The preparation strategies, structures, proton conductivity, conducting mechanism, application prospects and future research trends of zirconium-based MOFs are reviewed and highlighted.