Porous Carbon Materials Based on Graphdiyne Basis Units by the Incorporation of the Functional Groups and Li Atoms for Superior CO2 Capture and Sequestration

Efficient CO2 Capture and Separation in MOFs: Effect from Isoreticular Double Interpenetration

Severe CO2 emissions has posed an increasingly alarming threat, motivating the development of efficient CO2 capture materials, one of the key parts of carbon capture, utilization, and storage (CCUS). In this study, a series of metal-organic frameworks (MOFs) named Sc-X (X = S, M, L) were constructed inspired by recorded MOFs, Zn-BPZ-SA and MFU-4l-Li. The corresponding isoreticular double-interpenetrating MOFs (Sc-X-IDI) were subsequently constructed via the introduction of isoreticular double interpenetration. Grand canonical Monte Carlo (GCMC) simulations were adopted at 298 K and 0.1-1.0 bar to comprehensively evaluate the CO2 capture and separation performances in Sc-X and Sc-X-IDI, with gas distribution, isothermal adsorption heat (Qst), and van der Waals (vdW)/Coulomb interactions. It is showed that isoreticular double interpenetration significantly improved the interactions between adsorbed gases and frameworks by precisely modulating pore sizes, particularly observed in Sc-M and Sc-M-IDI. Specifically, the Qst and Coulomb interactions exhibited a substantial increase, rising from 28.38 and 22.19 kJ mol-1 in Sc-M to 43.52 and 38.04 kJ mol-1 in Sc-M-IDI, respectively, at 298 K and 1.0 bar. Besides, the selectivity of CO2 over CH4/N2 was enhanced from 55.36/107.28 in Sc-M to 3308.61/7021.48 in Sc-M-IDI. However, the CO2 capture capacity is significantly influenced by the pore size. Sc-M, with a favorable pore size, exhibits the highest capture capacity of 15.86 mmol g-1 at 298 K and 1.0 bar. This study elucidated the impact of isoreticular double interpenetration on the CO2 capture performance in MOFs.

Copper Single-Atom Catalysts-A Rising Star for Energy Conversion and Environmental Purification: Synthesis, Modification, and Advanced Applications

Future renewable energy supply and green, sustainable environmental development rely on various types of catalytic reactions. Copper single-atom catalysts (Cu SACs) are attractive due to their distinctive electronic structure (3d orbitals are not filled with valence electrons), high atomic utilization, and excellent catalytic performance and selectivity. Despite numerous optimization studies are conducted on Cu SACs in terms of energy conversion and environmental purification, the coupling among Cu atoms-support interactions, active sites, and catalytic performance remains unclear, and a systematic review of Cu SACs is lacking. To this end, this work summarizes the recent advances of Cu SACs. The synthesis strategies of Cu SACs, metal-support interactions between Cu single atoms and different supports, modification methods including modification for carriers, coordination environment regulating, site distance effect utilizing, and dual metal active center catalysts constructing, as well as their applications in energy conversion and environmental purification are emphatically introduced. Finally, the opportunities and challenges for the future Cu SACs development are discussed. This review aims to provide insight into Cu SACs and a reference for their optimal design and wide application.

Natural Products Derived Porous Carbons for CO2 Capture

As it is now established that global warming and climate change are a reality, international investments are pouring in and rightfully so for climate change mitigation. Carbon capture and separation (CCS) is therefore gaining paramount importance as it is considered one of the powerful solutions for global warming. Sorption on porous materials is a promising alternative to traditional carbon dioxide (CO2 ) capture technologies. Owing to their sustainable availability, economic viability, and important recyclability, natural products-derived porous carbons have emerged as favorable and competitive materials for CO2 sorption. Furthermore, the fabrication of high-quality value-added functional porous carbon-based materials using renewable precursors and waste materials is an environmentally friendly approach. This review provides crucial insights and analyses to enhance the understanding of the application of porous carbons in CO2 capture. Various methods for the synthesis of porous carbon, their structural characterization, and parameters that influence their sorption properties are discussed. The review also delves into the utilization of molecular dynamics (MD), Monte Carlo (MC), density functional theory (DFT), and machine learning techniques for simulating adsorption and validating experimental results. Lastly, the review provides future outlook and research directions for progressing the use of natural products-derived porous carbons for CO2 capture.

A three dimensional graphdiyne-like porous triptycene network for gas adsorption and separation

Graphdiyne, an emerging carbon allotrope, has attracted many researchers devoted to the study of its synthesis and application. The utilization of graphdiyne in gas adsorption and separation has been predicted by computer simulation with many examples. In this work, the triangular basic unit of graphdiyne was introduced into a triptycene-based porous organic polymer to obtain a three dimensional graphdiyne-like porous triptycene network named G-PTN. With high surface area and a microporous structure, G-PTN exhibited convincing application potential for the storage of gas molecules, especially for the selective adsorption of acetylene over ethylene. Computational simulation proved the importance of the triptycene units and three dimensional structure to the selectivity, as well as the potential of graphdiyne units as selective binding sites, suggesting that through judicious design, new three-dimensional porous graphdiyne could be acquired with better gas adsorption and separation performance.

Solving two industrial waste issues simultaneously: Coal gasification fine slag-based hierarchical porous composite with enhanced CO2 adsorption performance

The coal gasification fine slag (FS) is industrial waste consisting of residual carbon (RC) and slag particles (SP). High-performance hierarchical porous composite (HPC) was synthesized by chemical activation followed by hydrothermal treatment from FS. It has been realized that SP could play the positive role in developing pore structure of HPC which makes CO₂ uptake have a sharp increase. Through taking the advantage of SP, HPC has an obvious increase in surface area and pore volume from 914 to 1932 m²/g and 0.617 to 1.332 cm³/g, respectively. The changes of pore structure were mainly attributed to the two factors in a synergetic way. First, hydrothermal treatment could decrease the content of SP which acted as a ballast to reduce the surface area of activated carbon. Second, the formed silicate/aluminosilicate deposits on the carbon surface and forms silicate/aluminosilicate film on internal surface of carbon particles. This makes the meso-macropores change to micro- mesopores leading to the increase of the surface area and pore volume. The porous composites also showed high CO₂ adsorption performance. The 4-FSAC-HPC sample exhibits the highest CO₂ uptake of 3.25 mol/kg and 1.41 mol/kg at 25 and 50 °C, respectively, which is an increase of around 52% and 83% comparing with that of FSAC sample. Besides, CO₂ adsorption up to saturation can be achieved in less than 3 min. CO₂ uptake of the 4-FSAC-HPC sample was well regeneration efficiencies above 98% after 10 cycles adsorption/desorption. This work provides a new approach to prepare high-performance porous compositions using the material which contains not only carbon component but mineral matters. Furthermore, it realizes solving two industrial waste issues (fine slag and CO₂) simultaneous.

Neighboring sp-Hybridized Carbon Participated Molecular Oxygen Activation on the Interface of Sub-nanocluster CuO/Graphdiyne

Activation of O₂ is a crucial step in oxidation processes. Here, the concept of sp-hybridized C≡C triple bonds as an electron donor is adopted to develop highly active and stable catalysts for molecular oxygen activation. We demonstrate that the neighboring sp-hybridized C and Cu sites on the interface of the sub-nanocluster CuO/graphdiyne are the key structures to effectively modulate the O₂ activation process in the bridging adsorption mode. The as-prepared sub-nanocluster CuO/graphdiyne catalyst exhibited the highest CO oxidation activity and readily converted 50% CO at around 133 °C, which is 34 and 94 °C lower than that for CuO/graphene and CuO/active carbon catalysts, respectively. In situ diffused reflectance infrared Fourier transform spectroscopy and density functional theory calculation results proved that the neighboring sp-hybridized C is more favorable to promote the rapid dissociation of carbonate than sp²-hybridized C without overcoming any energy barrier. The gaseous CO directly reacts with the active molecular oxygen and tends to proceed through the E-R mechanism with a relatively low energy barrier (0.20 eV). This work revealed that sp-hybridized C of graphdiyne-based materials could effectively improve the O₂ activation efficiency, which could facilitate the low-temperature oxidation processes.

2D graphdiyne: an emerging carbon material

As a new member of carbon allotropes, graphdiyne (GDY) has the characteristics of being one-atom-thick with two-dimensional layers comprising sp and sp² hybridized carbon atoms, and represents a trend in the development of carbon materials. Its unique chemical and electronic structures give GDY many unique and fascinating properties such as rich chemical bonds, highly conjugated and super-large π structures, infinitely distributed pores and high inhomogeneity of charge distribution. GDY has entered a period of rapid development, especially with the significant emergence of fundamental research and applied research achievements over the past five years. As one of the frontiers of chemistry and materials science, graphdiyne was listed in the Top 10 research areas in the 2020 Research Frontiers report and was jointly released in the Top 10 in the world by Clarivate and the Chinese Academy of Sciences. The research results have shown the great potential of GDY in the applications of energy, catalysis, environmental science, electronic devices, detectors, biomedicine and therapy, etc. Scientists are eager to explore and fully reveal the new properties, discover new scientific concepts and phenomena, discover the new conversion modes and mechanisms of GDY in photoelectricity, energy, and catalysis, etc., and build the important scientific value of new conversion devices. This review covers research on the foundation and application of GDY, such as the controlled preparation of new methods of GDY and GDY-based materials, studies on new mechanisms and properties in chemistry and physics, and the foundation and applications in energy, catalysis, photoelectric and devices.

Transition-metal decorated graphdiyne monolayer as an efficient sensor toward phosphide (PH3) and arsine (AsH3)

Graphdiyne (GDY), a two-dimensional (2D) carbon, uniquely possesses mixed sp–sp2 hybridization, uniform nano-sized porous structure, semiconducting character, and excellent electrical conductivity.

Research Progress on Thermal Conductivity of Graphdiyne Nanoribbons and its Defects: A Review

BACKGROUND

Graphdiyne has a unique pi-conjugated structure, perfect pore distribution and adjustable electronic properties of sp2, sp hybrid planar framework. Due to the presence of acetylenic bonds, it has more excellent properties compared to grapheme, such as a unique structure-dependent Dirac cone, abundant carbon bonds and a large bandgap. As one of the important raw materials for nanodevices, it is extremely important to study the thermal properties of graphdiyne nanoribbon.

OBJECTIVE

This paper mainly introduces and discusses recent academic research and patents on the preparation methods and thermal conductivity of graphdiyne nanoribbons. Besides, the applications in engineering and vacancy defects in the preparation process of graphdiyne are described.

METHODS

Firstly, taking thermal conductivity as an index, the thermal conductivity of graphdiyne with various vacancy defects is discussed from the aspects of length, defect location and defect type. In addition, the graphdiyne nanoribbons were laterally compared with the thermal conductivity of the graphene nanoribbons.

RESULTS

The thermal conductivity of graphdiyne with defects increases with the length and width, which is lower than the intrinsic graphdiyne. The thermal conductivity of the acetylene chain lacking one carbon atom is higher than the one lacking the benzene ring. Typically, the thermal conductivity is larger in armchair than that of zigzag in the same size. Moreover the thermal conductivity of nanoribbons with double vacancy defects is lower than those nanoribbons with single vacancy defects, which can also decrease with the increase of temperature and the number of acetylene chains. The thermal conductivity is not sensitive to shear strain.

CONCLUSION

Due to the unique structure and electronic characteristics, graphdiyne has provoked an extensive research interest in the field of nanoscience. Graphdiyne is considered as one of the most promising materials of next-generation electronic devices.

The Accelerating World of Graphdiynes

Graphdiyne (GDY), a 2D allotrope of graphene, is first synthesized in 2010 and has attracted attention as a new low-dimensional carbon material. This work surveys the literature on GDYs. The history of GDYs is summarized, including their relationship with 2D graphyne carbons and yearly publication trends. GDY is a molecule-based nanosheet woven from a molecular monomer, hexaethynylbenzene; thus, it is synthesized by bottom-up approaches, which allow rich variation via monomer design. The GDY family and the synthetic procedures are also described. Highly developed π-conjugated electronic structures are common important features in GDY and graphene; however, the coexistence of sp and sp² carbons differentiates GDY from graphene. This difference gives rise to unique physical properties, such as high conductivity and large carrier mobility. Next, the theoretical and experimental studies of these properties are described in detail. A wide variety of applications are proposed for GDYs, including electrocatalysts and energy devices, which exploit the carbon-rich nature, porous framework, and expanded π-electron system of these compounds. Finally, potential uses are discussed.

Competitive Adsorption of Methanol-Acetone on Surface Functionalization (-COOH, -OH, -NH2, and -SO3H): Grand Canonical Monte Carlo and Density Functional Theory Simulations

The capture and separation properties of surface-functionalized activated carbons (AC-Rs, R= -COOH, -OH, -NH₂, and -SO₃H) for the methanol-acetone mixture were investigated for the first time by grand canonical Monte Carlo simulation (GCMC) and density functional theory (DFT). The effects of surface functional groups and structural characteristics of AC-Rs on the adsorption and separation behaviors of methanol and acetone were clarified. The surface functional group with strong electron-donating or electron-accepting capacity (i.e., -NH₂, -OH, and -SO₃H) was a crucial factor for the methanol-acetone capture and separation performance at the lower pressure range, and the accessible surface area was found to be another determinative factor. AC-NH₂ with the relatively large accessible surface area (4497 m²/g) exhibited an efficient capture performance for the single component (15.7 mol/kg for methanol and 6.7 mol/kg for acetone) and the highest methanol/acetone selectivity (∼23) at 0.02 kPa. At high pressures, the surface functionalization and available pore volume of AC-Rs played pivotal roles in the adsorptive separation process. This study provided mechanistic insights on how the surface functional groups affected the capture and separation properties of ACs, which would further provide a rational alternative strategy in the preparation and synthesis of ACs for the effective gas mixture separation.

Synthesis and Applications of Graphdiyne-Based Metal-Free Catalysts

The development of carbon materials offers the hope for obtaining inexpensive and high-performance alternatives to substitute noble-metal catalysts for their sustainable application. Graphdiyne, the rising-star carbon allotrope, is a big family with many members, and first realized the coexistence of sp- and sp² -hybridized carbon atoms in a 2D planar structure. Different from the prevailing carbon materials, its nonuniform distribution in the electronic structure and wide tunability in bandgap show many possibilities and special inspirations to construct new-concept metal-free catalysts, and provide many opportunities for achieving a catalytic activity comparable with that of noble-metal catalysts. Herein, the recent progress in synthetic methodologies, theoretical predictions, and experimental investigations of graphdiyne for metal-free catalysts is systematically summarized. Some new perspectives of the opportunities and challenges in developing high-performance graphdiyne-based metal-free catalysts are demonstrated.

Off-Plane Dielectric Screening of Few-Layer Graphdiyne and Its Family

We performed first-principles calculations on few-layer graphdiyne (GDY) and its family, sp-sp² hybrid carbon atomic layers, for an off-plane, static dielectric screening. The vertical dielectric constants of semiconducting GDY structures are finite and independent of the thickness. However, unlike the widely accepted wisdom that the static metallic screening is infinite, those of metallic GDY structures are finite and dependent on their thickness. Furthermore, the vertical dielectric screening can be tuned by varying the interlayer distance. We also studied the dielectric properties of heterostructures of GDY/its family; the vertical dielectric constant has an equivalent value from the two distinct values of the two distinct monostructures. The dielectric screening behaviors are well described by the uniform dielectric slab model. In addition, the band gaps can be widely tuned from 0 to 0.8 eV, by varying the thickness and electric field. Our results provide a method for engineering the dielectric constant and band gap of GDY and its family for applications of supercapacitors and nanodevices.

A lithium-modified zirconium-based metal organic framework (UiO-66) for efficient CO2 adsorption

The adsorption mechanism of carbon dioxide (CO₂) on Li/UiO-66 was studied by an in situ DRIFTS study.