An Implantable Transparent Conductive Film with Water Resistance and Ultrabendability for Electronic Devices

Programmable DNA-Based Boolean Logic Microfluidic Processing Unit

As molecular computing materials, information-encoded deoxyribonucleic acid (DNA) strands provide a logical computing process by cascaded and parallel chain reactions. However, the reactions in DNA-based combinational logic computing are mostly achieved through a manual process by adding desired DNA molecules in a single microtube or a substrate. For DNA-based Boolean logic, using microfluidic chips can afford automated operation, programmable control, and seamless combinational logic operation, similar to electronic microprocessors. In this paper, we present a programmable DNA-based microfluidic processing unit (MPU) chip that can be controlled via a personal computer for performing DNA calculations. To fabricate this DNA-based MPU, polydimethylsiloxane was cast using double-sided molding techniques for alignment between the microfluidics and valve switch. For a uniform surface, molds fabricated using a three-dimensional printer were spin-coated by a polymer. For programming control, the valve switch arms were operated by servo motors. In the MPU controlled via a personal computer or smartphone application, the molecules with two input DNAs and a logic template DNA were reacted for the basic AND and OR operations. Furthermore, the DNA molecules reacted in a cascading manner for combinational AND and OR operations. Finally, we demonstrated a 2-to-1 multiplexer and the XOR operation with a three-step cascade reaction using the simple DNA-based MPU, which can perform Boolean logic operations (AND, OR, and NOT). Through logic combination, this DNA-based Boolean logic MPU, which can be operated using programming language, is expected to facilitate the development of complex functional circuits such as arithmetic logical units and neuromorphic circuits.

Defect Filling Method of Sensor Encapsulation Based on Micro-Nano Composite Structure with Parylene Coating

The demand for waterproofing of polymer (parylene) coating encapsulation has increased in a wide variety of applications, especially in the waterproof protection of electronic devices. However, parylene coatings often produce pinholes and cracks, which will reduce the waterproof effect as a protective barrier. This characteristic has a more significant influence on sensors and actuators with movable parts. Thus, a defect filling method of micro-nano composite structure is proposed to improve the waterproof ability of parylene coatings. The defect filling method is composed of a nano layer of Al2O3 molecules and a micro layer of parylene polymer. Based on the diffusion mechanism of water molecules in the polymer membrane, defects on the surface of polymer encapsulation will be filled and decomposed into smaller areas by Al2O3 nanoparticles to delay or hinder the penetration of water molecules. Accordingly, the dense Al2O3 nanoparticles are utilized to fill and repair the surface of the organic polymer by low-rate atomic layer deposition. This paper takes the pressure sensor as an example to carry out the corresponding research. Experimental results show that the proposed method is very effective and the encapsulated sensors work properly in a saline solution after a period of time equivalent to 153.9 days in body temperature, maintaining their accuracy and precision of 2 mmHg. Moreover, the sensors could improve accuracy by about 43% after the proposed encapsulation. Therefore, the water molecule anti-permeability encapsulation would have broad application prospects in micro/nano-device protection.

High-Speed Fabrication of Clear Transparent Cellulose Nanopaper by Applying Humidity-Controlled Multi-Stage Drying Method

As a renewable nanomaterial, transparent nanopaper is one of the promising materials for electronic devices. Although conventional evaporation drying method endows nanopaper with superior optical properties, the long fabrication time limits its widely use. In this work, we propose a multi-stage drying method to achieve high-speed fabrication of clear transparent nanopaper. Drying experiments reveal that nanopaper's drying process can be separated into two periods. For the conventional single-stage evaporation drying, the drying condition is kept the same. In our newly proposed multi-stage drying, the relative humidity (RH), which is the key parameter for both drying time and haze, is set differently during these two periods. Applying this method in a humidity-controllable environmental chamber, the drying time can be shortened by 35% (from 11.7 h to 7.6 h) while maintaining the same haze level as that from single-stage drying. For a conventional humidity-uncontrollable oven, a special air flow system is added. The air flow system enables decrease of RH by removing water vapor at the water/air interface during the earlier period, thus fabricating clear transparent nanopaper in a relatively short time. Therefore, this humidity-controlled multi-stage drying method will help reduce the manufacturing time and encourage the widespread use of future nanopaper-based flexible electronics.

A Flexible and Highly Sensitive Pressure Sensor Based on AgNWs/NRLF for Hand Motion Monitoring

Flexible, highly sensitive, easy fabricating process, low-cost pressure sensors are the trend for flexible electronic devices. Inspired by the softness, comfortable, environmental friendliness and harmless of natural latex mattress, herein, we report an agile approach of constructing a flexible 3D-architectured conductive network by dip-coating silver nanowires (AgNWs) on the natural rubber latex foam (NRLF) substrate that provide the 3D micro-network structure as the skeleton. The variation of the contact transformed into the electrical signal among the conductive three-dimensional random networks during compressive deformation is the piezoresistive effect of AgNWs/NRLF pressure sensors. The resulting AgNWs/NRLF pressure sensors exhibit desirable electrical conductivity (0.45-0.50 S/m), excellent flexibility (58.57 kPa at 80% strain), good hydrophobicity (~128° at 5th dip-coated times) and outstanding repeatability. The AgNWs/NRLF sensors can be assembled on a glove to detect hand motion sensitively such as bending, touching and holding, show potential application such as artificial skin, human prostheses and health monitoring in multifunctional pressure sensors.

Application of Biodegradable and Biocompatible Nanocomposites in Electronics: Current Status and Future Directions

With the continuous increase in the production of electronic devices, large amounts of electronic waste (E-waste) are routinely being discarded into the environment. This causes serious environmental and ecological problems because of the non-degradable polymers, released hazardous chemicals, and toxic heavy metals. The appearance of biodegradable polymers, which can be degraded or dissolved into the surrounding environment with no pollution, is promising for effectively relieving the environmental burden. Additionally, biodegradable polymers are usually biocompatible, which enables electronics to be used in implantable biomedical applications. However, for some specific application requirements, such as flexibility, electric conductivity, dielectric property, gas and water vapor barrier, most biodegradable polymers are inadequate. Recent research has focused on the preparation of nanocomposites by incorporating nanofillers into biopolymers, so as to endow them with functional characteristics, while simultaneously maintaining effective biodegradability and biocompatibility. As such, bionanocomposites have broad application prospects in electronic devices. In this paper, emergent biodegradable and biocompatible polymers used as insulators or (semi)conductors are first reviewed, followed by biodegradable and biocompatible nanocomposites applied in electronics as substrates, (semi)conductors and dielectrics, as well as electronic packaging, which is highlighted with specific examples. To finish, future directions of the biodegradable and biocompatible nanocomposites, as well as the challenges, that must be overcome are discussed.

Biodegradable Transparent Substrate Based on Edible Starch-Chitosan Embedded with Nature-Inspired Three-Dimensionally Interconnected Conductive Nanocomposites for Wearable Green Electronics

Electronic waste (E-waste) contain large environmental contaminants such as toxic heavy metals and hazardous chemicals. These contaminants would migrate into drinking water or food chains and pose a serious threat to environment and human health. Biodegradable green electronics has great potential to address the issue of E-waste. Here, we report on a novel biodegradable and flexible transparent electrode, integrating three-dimensionally (3D) interconnected conductive nanocomposites into edible starch-chitosan-based substrates. Starch and chitosan are extracted from abundant and inexpensive potato and crab shells, respectively. Nacre-inspired interface designs are introduced to construct a 3D interconnected single wall carbon nanotube (SCNT)-pristine graphene (PG)-conductive polymer network architecture. The inorganic one-dimensional SCNT and two-dimensional PG sheets are tightly cross-linked together at the junction interface by long organic conductive poly(3,4-ethylenedioxythiophene) (PEDOT) chains. The formation of a 3D continuous SCNT-PG-PEDOT conductive network leads to not only a low sheet resistance but also a superior flexibility. The flexible transparent electrode possesses an excellent optoelectronic performance: typically, a sheet resistance of 46 Ω/sq with a transmittance of 83.5% at a typical wavelength of 550 nm. The sheet resistance of the electrode slightly increased less than 3% even after hundreds of bending cycles. The lightweight flexible and biocompatible transparent electrode could conform to skin topography or any other arbitrary surface naturally. The edible starch-chitosan substrate-based transparent electrodes could be biodegraded in lysozyme solution rapidly at room temperature without producing any toxic residues. SCNT-PG-PEDOT can be recycled via a membrane process for further fabrication of conductive and reinforcement composites. This high-performance biodegradable transparent electrode is a promising material for next-generation wearable green optoelectronics, transient electronics, and edible electronics.

Novel Patterning Method for Nanomaterials and Its Application to Flexible Organic Light-Emitting Diodes

We present a simple, low-cost, and scalable method to form various patterns of nanomaterials with different dimensions and shapes using capillary and centrifugal forces. The desired patterns were formed on the surfaces of poly(dimethylsiloxane) (PDMS) stamps, and the PDMS stamps were conformally contacted with the surfaces of flexible polymer substrates. Solutions of nanomaterials, such as metal nanowires and nanoparticles, were then drop-casted at one open end of the microchannels formed at the interface of the polymer substrate and PDMS stamp. The nanomaterial solutions penetrated the microchannels due to capillary force interactions between the surfaces and the fluid. The solvents of the nanomaterial solutions exfiltrated from the entrance of microchannels because of the coffee ring effect. Then, the solvent remaining in the microchannels was discharged by applying a centrifugal force by spinning the polymer substrate/PDMS stamp system. Because of the synergistic effect of the capillary force, coffee ring effect, and centrifugal force, uniform patterns of the nanomaterials with clearly defined edges were formed for a variety of pattern shapes and substrates. Furthermore, the direct patterning approach resulted in a significant reduction in the amount of wasted materials. Finally, flexible organic light-emitting diodes were successfully fabricated on the finely patterned nanowire electrodes.