Flower-Like Molybdenum Disulfide for Polarity-Triggered Accumulation/Release of Small Molecules

Synthesis and Characterizations of MoS2 Nanoflowers and Spectroscopic Study of their Interaction with Bovine Serum Albumin

Molybdenum disulfide nanoflowers (MoS2 NFs) were prepared by hydrothermal method. The prepared MoS2 NFs was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), specific surface areas, Raman and X-ray photoelectron spectroscopy (XPS). The characterization results show that the flower-like spherical MoS2 is composed of many ultra-thin nanosheets with an average diameter of about 300-400 nm. MoS2 NFs also exhibits excellent UV-vis absorption and high fluorescence intensity. In order to explore the biological behavior of MoS2 NFs, the interaction between MoS2 NFs and bovine serum albumin (BSA) was studied by UV-Vis absorption, fluorescence, synchronous fluorescence spectra, and cyclic voltammetry. The results of absorption and fluorescence show that MoS2 NFs and BSA interact strongly through the formation of complexes in the ground state, and the static quenching is the main mechanism. The Stern-Volmer constant and the quenching constant was calculated about 3.79×107 L mol-1 and 3.79×1015 L mol-1 s-1, respectively. The synchronous fluorescence implied that MoS2 in the complex may mainly bind to tryptophan residues of BSA. The cyclic voltammograms indicated that the addition of BSA makes electron reduction of MoS2 NFs more difficult than the corresponding free state. The results show that hydrophobic forces play a major role in the binding interaction between BSA and MoS2 NFs.

Surface plasmon resonance biosensor chips integrated with MoS2-MoO3 hybrid microflowers for rapid CFP-10 tuberculosis detection

This study reports on the modification of surface plasmon resonance (SPR) chips with molybdenum disulfide-molybdenum trioxide (MoS2-MoO3) microflowers to detect the tuberculosis (TB) markers of CFP-10. The MoS2-MoO3 microflowers were prepared by hydrothermal methods with variations in the pH and amount of trisodium citrate (Na3Ct), which were projected to influence the shape and size of microflower particles. The analysis shows that optimum MoS2-MoO3 hybrid microflowers were obtained at neutral pH using 0.5 g Na3Ct. The modified SPR biosensor exhibits a ten times higher response than the bare Au. Moreover, increasing MoS2-MoO3 thickness results in a higher detection response, sensitivity, and a smaller limit of detection (LOD). Using the optimized material composition, the Au/MoS2-MoO3-integrated SPR sensor can demonstrate sensitivity and LOD of 1.005 and 3.45 ng mL-1, respectively. This biosensor also has good selectivity, stability, and reproducibility based on cross-sensitivity characterization with other analytes and repeated measurements on several chips with different storing times and fabrication batch. Therefore, this proposed SPR biosensor possesses high potential to be further developed and applied as a detection technology for CFP-10 in monitoring and diagnosing TB.

Rapidly detecting the carcinogen acetaldehyde: preparation and application of a flower-like MoS2 cataluminescence sensor at low working temperature

In this paper, a cataluminescence (CTL) gas sensor based on flower-like molybdenum disulfide (MoS2) is developed. The experimental results show that it has high sensitivity and selectivity to acetaldehyde. The CTL sensor has the advantage of fast response; the response time is about 3 s and the recovery time is about 40 s. The optimal working temperature of this sensor is 174 °C, which is lower than that of the CTL sensors used for acetaldehyde detection in many other reports. Under the optimized conditions, the CTL signal intensity shows a good linear relationship with acetaldehyde concentration (R2 = 0.9991) within the concentration range of 40-2000 ppm, and the detection limit (LOD) is 3.75 ppm. The selectivity experiment results show that the sensor has an obvious response to acetaldehyde and a very weak response to acetic acid, and has no response to many other VOCs (ether, cyclohexane, butyl ether, carbon tetrachloride, ethanol, toluene, formaldehyde, glycerol, trichloromethane and xylene). After 8 repeated measurements for four weeks, the relative standard deviation (RSD) of the CTL sensor is 1.03%, indicating that it has good reproducibility and stability, which shows that the CTL sensor has a promising prospect for the detection of acetaldehyde.

Adsorption of Rhodamine B and Pb(II) from aqueous solution by MoS2 nanosheet modified biochar: Fabrication, performance, and mechanisms

Mediated by polydopamine, MoS2 nanosheets were immobilized on the porous biochar derived from fungus residue, forming a novel biochar-based nanocomposite (MoS2-PDA@FRC) for the removal of Rhodamine B(RhB) and Pb(II) from water. Utilizing MoS2 nanosheets with abundant active adsorption sites, MoS2-PDA@FRC showed higher adsorption capacities than raw biochar, with 2.76 and 1.78 times higher capacities for RhB and Pb(II) respectively. MoS2-PDA@FRC also exhibited fast adsorption kinetics for RhB (120 min) and Pb (180 min) removal, as well as satisfactory adsorption selectivity in the presence of coexisting substances. The underlying removal mechanism was explored via Fourier transform infrared and X-ray photoelectron spectroscopies. Furthermore, during cyclic adsorption-regeneration and the fixed-bed adsorption experiments, the nanocomposite removed RhB and Pb(II) with high effectiveness and stability. Collectively, the results demonstrated the bright prospects of MoS2-PDA@FRC as a highly efficient decontamination agent of RhB and Pb(II) from water.

MoS2-Nanoflower and Nanodiamond Co-Engineered Surface Plasmon Resonance for Biosensing

Surface plasmon resonance (SPR) based sensors play an important role in the biological and medical fields, and improving the sensitivity is a goal that has always been pursued. In this paper, a sensitivity enhancement scheme jointly employing MoS₂ nanoflower (MNF) and nanodiamond (ND) to co-engineer the plasmonic surface was proposed and demonstrated. The scheme could be easily implemented via physically depositing MNF and ND overlayers on the gold surface of an SPR chip, and the overlayer could be flexibly adjusted by controlling the deposition times, thus approaching the optimal performance. The bulk RI sensitivity was enhanced from 9682 to 12,219 nm/RIU under the optimal condition that successively deposited MNF and ND 1 and 2 times. The proposed scheme was proved in an IgG immunoassay, where the sensitivity was twice enhanced compared to the traditional bare gold surface. Characterization and simulation results revealed that the improvement arose from the enhanced sensing field and increased antibody loading via the deposited MNF and ND overlayer. At the same time, the versatile surface property of NDs allowed a specifically-functionalized sensor using the standard method compatible with a gold surface. Besides, the application for pseudorabies virus detection in serum solution was also demonstrated.

In Situ Porousized MoS2 Nano Islands Enhance HER/OER Bifunctional Electrocatalysis

2D molybdenum disulfide (MoS₂ ) is developed as a potential alternative non-precious metal electrocatalyst for energy conversion. It is well known that 2D MoS₂ has three main phases 2H, 1T, and 1T'. However, the most stable 2H-phase shows poor electrocatalysis in its basal plane, compared with its edge sites. In this work, a facile one-step hydrothermal-driven in situ porousizing of MoS₂ into self-supporting nano islands to maximally expose the edges of MoS₂ grains for efficient utilization of the active stable sites at the edges of MoS₂ is reported. The results show that such active, aggregation-free nano islands greatly enhance MoS₂ 's hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) bifunctional electrocatalytic activities. At a low overpotential of 248 and 300 mV, the porous MoS₂ nano islands can generate a current density of 10 mA cm^-2 in HER and OER, which is much better than typical nanosheet morphology. Surprisingly, the porous MoS₂ nano islands even exhibit better performance than the current commercial RuO₂ catalyst in OER. This discovery will be another effective strategy to promote robust 2H-phase, instead of 1T/1T'-phase, MoS₂ to achieve efficient endurable bifunctional HER/OER, which is expected to further replace precious metal catalysts in industry.

Molecular Recognition-Triggered Aptazyme Sensor Using a Co-MOF@MCA Hybrid Nanostructure as Signal Labels for Adenosine Triphosphate Detection in Food Samples

Developing rapid detection technology for adenosine triphosphate (ATP) is crucial in quality supervision and food safety. Herein, an electrochemical aptasensor based on an aptazyme-catalyzed signal amplification strategy is constructed for ATP detection using polyethyleneimine-functionalized molybdenum disulfide (PEI-MoS₂)/Au@PtPd nanobipyramids (MoS₂/Au@PtPd NBPs) as a modification material. Additionally, a novel kind of nitrogen-rich covalent organic framework (COF) is prepared using melamine and cyanuric acid (MCA). We synthesize MCA and the Co-based metal organic framework (Co-MOF) as the signal label. Due to the fact that π-π stacking interactions of Co-MOF@MCA can expand the load efficiency and surface concentration of the signal label, the signal response is an order of magnitude higher than that of Co-MOF or MCA as the signal label. Target ATP changes the conformation of the aptazyme, and it becomes activated. With the assistance of metal ions, the signal label is circularly cleaved, causing an amplification of the signal. Among them, MoS₂/Au@PtPd NBPs have a large specific surface area and good electrical conductivity and can carry substantial DNA strands and amplify the redox signal of methylene blue (MB). Under optimal conditions, the aptasensor can detect ATP from 10 pM to 100 μM with a low limit of detection of 7.37 × 10^-10 μM. Therefore, the novel aptasensor has extensive application prospects in quality supervision and food safety.

Reclaimable MoS2 Sponge Absorbent for Drinking Water Purification Driven by Solar Energy

With the fast development of modern industries, scarcity of freshwater resources caused by heavy metal pollution (i.e., Hg²⁺) has become a severe issue for human beings. Herein, a 3D-MoS₂ sponge as an excellent absorbent is fabricated for mercury removal due to its multidimensional adsorption pathways, which decreases the biomagnification effect of methylmercury in water bodies. Furthermore, a secondary water purification strategy is employed to harvest drinkable water with the exhausted adsorbents, thus alleviating the crisis of drinking water shortage. Compared to the conventional landfill treatment, the exhausted MoS₂ sponge absorbents are further functionalized with a poly(ethylene glycol) (PEG) layer to prevent the heavy metals from leaking and enhance the hydrophilicity for photothermal conversion. The fabricated evaporator displays excellent evaporation rates of ∼1.45 kg m^-2 h^-1 under sunlight irradiation and produces freshwater with Hg²⁺ under the WHO drinking water standard at 0.001 mg L^-1. These results not only assist in avoiding the biodeposition effect of mercury in water but also provide an environment-friendly strategy to recycle hazardous adsorbents for water purification.

Engineering Interface on a 3D CoxNi1-x(OH)2@MoS2 Hollow Heterostructure for Robust Electrocatalytic Hydrogen Evolution

Clarifying the responsibilities and constructing the synergy of different active phases are of great significance but still an urgent challenge for the heterostructure catalyst to improve the hydrogen evolution reaction (HER) process. Here, three-dimensional (3D) Co_xNi_(1-x)(OH)₂ hollow structure integrating MoS₂ nanosheet catalysts [Co_xNi_(1-x)(OH)₂@MoS₂] were ingeniously designed and prepared. This unique structure has realized the construction of a dual active phase for the optimized stepwise-synergetic hydrogen evolution process over a universal pH range through interface assembly engineering. Meanwhile, the 3D hollow heterostructure with a high surface-to-volume ratio can effectively avoid the agglomeration of MoS₂ and enhance the Co_xNi_(1-x)(OH)₂-MoS₂ heterointerfaces. Thus, superior HER activity and stability were obtained over the universal pH range. Density functional theory calculation reveals that Co_xNi_(1-x)(OH)₂ and MoS₂ phases provide efficient active sites for rate-determining water dissociation and H* adsorption/H₂ generation on Co_xNi_(1-x)(OH)₂-MoS₂ heterointerfaces, respectively, resulting in an optimized energy barrier for HER. This work proposes a constructive strategy to design highly efficient electrocatalysts based on the heterointerface with a defined responsible active phase of electrocatalysts.

MoS2-nanoflower enhanced programmable adsorption/desorption plasmonic detection for bipolar-molecules with high sensitivity

High sensitivity and capturing ratio are strongly demanded for surface plasmon resonance (SPR) sensors when applied in detection of small molecules. Herein, an SPR sensor is combined with a novel smart material, namely, MoS₂ nanoflowers (MNFs), to demonstrate programmable adsorption/desorption of small bipolar molecules, i.e., amino acids. The MNFs overcoated on the plasmonic gold layer increase the sensitivity by 25% compared to an unmodified SPR sensor, because of the electric field enhancement at the gold surface. Furthermore, as the MNFs have rich edge sites and negatively charged surfaces, the MNF-SPR sensors exhibit not only much higher bipolar-molecule adsorption capability, but also efficient desorption of these molecules. It is demonstrated that the MNF-SPR sensors enable controllable detection of amino acids by adjusting solution pH according to their isoelectric points. In addition, the MNFs decorated on the plasmonic interface can be as nanostructure frameworks and modified with antibody, which allows for specific detection of proteins. This novel SPR sensor provides a new simple strategy for pre-screening of amino acid disorders in blood plasma and a universal high-sensitive platform for immunoassay.

Mechanism of novel MoS2-modified biochar composites for removal of cadmium (II) from aqueous solutions

The purpose of this study was to develop a MoS₂-impregnated biochar (MoS₂@BC) via hydrothermal reaction for adsorption of cadmium (Cd) from an aqueous solution. The prepared adsorbents were characterized, and their abilities to remove Cd(II) were evaluated. The Langmuir and pseudo-second-order models better described the removal of Cd(II) by MoS₂@BC. The prepared MoS₂@BC exhibited excellent monolayer adsorption capacity. The S-containing functional groups on MoS₂@BC enhanced the adsorption of Cd(II). Multiple Cd(II) sorption mechanisms were identified; including Cd(II)-π interactions, ion exchange, electrostatic interaction, and complexation. The dominant mechanism involved Cd-O (38.3%) bonds and Cd-S complexation (61.7%) on MoS₂@BC. The as-prepared MoS₂@BC is both economical and efficient, making it an excellent material for environmental Cd(II) remediation.

Hierarchical Gold Mesoflowers in Enzyme Engineering: An Environmentally Friendly Strategy for the Enhanced Enzymatic Performance and Biodiesel Production

To expand the field of nanomaterial and engineering of enzyme in eco-friendly processes, gold mesoflower (Au-MF) nanostructure was applied for preparation of three series of immobilized lipase (Au-MF/SAM 1-3) through biofunctionalization of surface by Ugi multicomponent reaction. The synthesized Au-MF/SAM 1-3/lipase as unique biocatalysts was confirmed by different analytical tools and techniques. Compared to the free lipase, the Au-MF/SAM 1-3/lipase showed more stability at high temperature and pH. Also, these biocatalysts showed high storage stability and reusability after 2 months and eight cycles, respectively. Moreover, the kinetic behavior was investigated and the results showed a minimal impairment of catalytic activity of immobilized lipase. The kinetic constants of the immobilized lipase, Au-MF/SAM 2/lipase, are K_m = 0.37 mM, V_max = 0.22 mM min^-1, and k_cat = 154 min^-1. The immobilized lipase showed smaller activation energy (E_a) than that of free enzyme, indicating that the immobilized enzyme is less sensitive to temperature. In the following, the biodiesel production from palmitic acid was studied in the presence of Au-MF/SAM 2/lipase as an efficient biocatalyst. The influence of different reaction parameters such as temperature, molar ratio of alcohol to palmitic acid, water content, and lipase amount was deeply investigated.

Multimodal theranostics augmented by transmembrane polymer-sealed nano-enzymatic porous MoS2 nanoflowers

Developing an all-in-one multimodal theranostic platform that can synergistically integrate sensitive photoacoustic (PA) imaging, enhanced photothermal therapy (PTT) and photodynamic therapy (PDT) as well as the nano-enzyme activated chemodynamic therapy (CDT) presents a great challenge for the current nanomedicine design. Herein, a simple hydrothermal method was used to prepare porous molybdenum disulfide (MoS₂) nanoflowers. These nanoflowers were assembled by three dimensional (3D)-stacked MoS₂ nanosheets with plentiful pores and large surfaces, which thus exhibited enhanced photothermal conversion via light trapping and peroxidase (POD)-like activity via active defects exposure. Consequently, this 3D-MoS₂ nanostructure could be well-sealed by polyethylene glycol-polyethylenimine polymer modified with nucleolar translocation signal sequence of the LIM Kinase 2 protein (LNP) via strong electrostatic interaction, which not only benefited to stably deliver anticancer drug doxorubicin (DOX) into the tumor cells for pH/NIR-responsive chemotherapy, but also provided strong photoacoustic, photothermal performances and stimulated generation of reactive oxygen species (ROS) for imaging-guided PTT/PDT/CDT combined therapy. This work promised a simple all-in-one multimodal theranostic platform to augment the potential antitumoral therapeutic outcomes.

Partial Oxidation Strategy to Synthesize WS2/WO3 Heterostructure with Enhanced Adsorption Performance for Organic Dyes: Synthesis, Modelling, and Mechanism

In this work, a facile oxidation strategy was developed to prepare novel tungsten disulfide/tungsten trioxide (WS₂/WO₃) heterostructures for adsorbing organic dyes efficiently by combining the hydrophilic property of WO₃ and the superior dye affinity of WS₂. The structural and elemental properties of the synthesized hybrid materials were systematically investigated, and the results demonstrated the retained flower-like morphology of the primitive WS₂ and the successful introduction of WO₃. Furthermore, surface properties such as a superior hydrophilicity and negative-charged potential were also demonstrated by a water contact angle characterization combined with a Zeta potential analysis. The performance of the obtained WS₂/WO₃ hybrid materials for removing Rhodamine B (RhB) from wastewater was evaluated. The results showed that the maximum adsorption capacity of the newly synthesized material could reach 237.1 mg/g. Besides, the adsorption isotherms were also simulated by a statistical physics monolayer model, which revealed the non-horizontal orientation of adsorbates and endothermic physical interaction. Finally, the adsorption mechanism and the recyclability revealed that the partial oxidation strategy could contribute to a higher adsorption capacity by modulating the surface properties and could be applied as a highly efficient strategy to design other transition metal dichalcogenides (TMDs) heterostructures for removing organic dyes from wastewater.

Inky flower-like supermicelles assembled from π-conjugated block copolymers

Conjugated block copolymers PPV₇-b-P2VP_n are utilized as building blocks to construct inky flower-like hierarchical supermicelles. The assembly process is tracked and the control of morphology is successfully realized.

Colloidal Template Synthesis of Nanomaterials by Using Microporous Organic Nanoparticles: The Case of C@MoS2 Nanoadsorbents

The so-called colloidal template synthesis has been applied to the preparation of surface-engineered nanoadsorbents. Colloidal microporous organic network nanotemplates (C-MONs), which showed a high surface area (611 m²  g^-1 ) and enhanced microporosity, were prepared through the networking of organic building blocks in the presence of poly(vinylpyrrolidone) (PVP). Owing to entrapment of the PVP in networks, the C-MONs showed good colloidal dispersion in EtOH. MoS₂ precursors were incorporated into the C-MONs and heat treatment afforded core-shell-type C@MoS₂ nanoparticles with a diameter of 80 nm, a negative zeta potential (-39.5 mV), a high surface area (508 m²  g^-1 ), and excellent adsorption performance towards cationic dyes (q_max =343.6 and 421.9 mg g^-1 for methylene blue and rhodamine B, respectively).

SERS effect of selectively adsorbed dyes by hydrothermally-produced MoS2 nanosheets

The electro-magnetic mechanism and chemical transfer mechanism coexist in the surface-enhanced Raman scattering (SERS) procedure.

A facile dip-coating method for the preparation of separable MoS2 sponges and their high-efficient adsorption behaviors of Rhodamine B

A novel MoS₂ sponge adsorbent with excellent RhB adsorption capacity, convenient separability and satisfactory reusability was successfully prepared through a facile dip-coating method.

A polyaniline@MoS2-based organic–inorganic nanohybrid for the removal of Congo red: adsorption kinetic, thermodynamic and isotherm studies

Organic–inorganic functional hybrid polymeric materials are well known for the efficient removal of contaminants from wastewater.