Phenylboronic Acid Templated Gold Nanoclusters for Mucin Detection Using a Smartphone-Based Device and Targeted Cancer Cell Theranostics

A Review on Gold Nanoclusters for Cancer Phototherapy

Cancer phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), has been extensively studied in recent years because of its noninvasive properties, high efficiency, improved selectivity, and reduced side effects. Gold nanoclusters (AuNCs) have the advantages of high biocompatibility, high biosafety, excellent photoresponse, and high tumor penetration ability. This review analyzes the use of AuNCs in tumor phototherapy in recent years from three aspects, namely, AuNCs in PDT, AuNCs in PTT, and AuNCs in combination therapy, and presents the high potential of AuNCs in cancer phototherapy. This review aims to provide readers with the unique advantages, diversified application approaches, and bright application prospects of AuNCs in phototherapy and to provide insights into strategies for applying AuNCs to tumor phototherapy.

Designing stimuli-responsive upconversion nanoparticles based on a mimetic immunoassay for potential accurate diabetic nephropathy diagnosis

Diabetic nephropathy (DN) is the most common microvascular complication associated with incurable diabetes. The gold standard diagnostic method for DN is based on the detection of proteinuria but it overlooks cases of non-proteinuria (NP-DN). To address this limitation, urinary sialic acid (SA) has been confirmed as an effective biomarker for various DNs. Herein, we constructed an ultrasensitive non-proteinuria assay platform to accurately diagnose DN within 20 min. This platform utilized the ninhydrin reaction between acidic ninhydrin and urinary sialic acid (SA) as an effective biomarker for various DNs. A compound with a maximum absorption peak at 470 nm was produced in this reaction and contributed to the fluorescence decrease of the blue-emission core-shell upconverting nanoparticles through the inner filter effect (IFE). By integrating the inner filter effect (IFE) with a mimetic immunoassay, the imperceptible color was converted into highly sensitive fluorescence signals. This protocol shows a stable and high sensitivity with a detection limit of 20 nmol L-1 and provides 100% positive prediction for urine samples, demonstrating its potential for clinical diagnosis and long-term monitoring of DN.

Bio-SCAN V2: A CRISPR/dCas9-based lateral flow assay for rapid detection of theophylline

Rapid, specific, and robust diagnostic strategies are needed to develop sensitive biosensors for small molecule detection, which could aid in controlling contamination and disease transmission. Recently, the target-induced collateral activity of Cas nucleases [clustered regularly interspaced short palindromic repeats (CRISPR)-associated nucleases] was exploited to develop high-throughput diagnostic modules for detecting nucleic acids and small molecules. Here, we have expanded the diagnostic ability of the CRISPR-Cas system by developing Bio-SCAN V2, a ligand-responsive CRISPR-Cas platform for detecting non-nucleic acid small molecule targets. The Bio-SCAN V2 consists of an engineered ligand-responsive sgRNA (ligRNA), biotinylated dead Cas9 (dCas9-biotin), 6-carboxyfluorescein (FAM)-labeled amplicons, and lateral flow assay (LFA) strips. LigRNA interacts with dCas9-biotin only in the presence of sgRNA-specific ligand molecules to make a ribonucleoprotein (RNP). Next, the ligand-induced ribonucleoprotein is exposed to FAM-labeled amplicons for binding, and the presence of the ligand (small molecule) is detected as a visual signal [(dCas9-biotin)-ligRNA-FAM labeled DNA-AuNP complex] at the test line of the lateral flow assay strip. With the Bio-SCAN V2 platform, we are able to detect the model molecule theophylline with a limit of detection (LOD) up to 2 μM in a short time, requiring only 15 min from sample application to visual readout. Taken together, Bio-SCAN V2 assay provides a rapid, specific, and ultrasensitive detection platform for theophylline.

A visual and reversible nanoprobe for rapid and on-site determination of hexavalent chromium and lysine based on dual-emission carbon quantum dots coupled with smartphone

A straightforward, largely instrument-free, smartphone-based analytical strategy for hexavalent chromium and lysine (Lys) on-site detection via exploitation of dual-emission carbon quantum dots (DECQDs) has been demonstrated. DECQDs show dual-emission peaks at 439 and 630 nm with the excitation at 375 nm. As a dual-mode detection probe, the fluorescence and ultraviolet adsorption spectra of DECQDs vary with hexavalent chromium concentrations. Most importantly, Lys can restore the fluorescence of the hexavalent chromium added DECQD nanoprobe and change the color of the probe under natural light. At the same time, based on the participation of smartphones, the prepared DECQD probes favor the establishment of visual smart sensors that can also be used for the in-situ detection of targets. The on-site quantitative analysis exhibited a linear range of 5.3-320 μM with a detection limit of 1.6 μM towards Cr(VI) and the differentiation of Lys variation from 1 to 75 mM with a detection limit of 0.3 mM. The probe has been applied for the first time to enable vision-based colorimetric in complex samples such as water, milk and egg. The recoveries of Cr(VI) and Lys in real samples were between 90 and 104%, and the relative standard deviation (RSD) was as low as 0.4%. This work offers new perspectives for fundamental understanding and new design of functional luminescent materials that are applicable for food-safety and rapid and intelligent inspection. A straightforward, large instrument-free, smartphone-based analytical strategy with dual-emission carbon quantum dots was developed for hexavalent chromium and Lys on-site detection via fluorescent and colorimetric twofold readout measure.

Boronate-Affinity Cross-Linking-Based Ratiometric Electrochemical Detection of Glycoconjugates

Despite the widespread application of the boronate-affinity cross-linking (BAC) in the separation, enrichment, and sensing of glycoconjugates, it remains a huge challenge to integrate the BAC into the selective electrochemical detection of glycoconjugates due to the poor selectivity of the BAC. Herein, we demonstrate a BAC-based ratiometric electrochemical method for the simple, low-cost, and highly sensitive and selective detection of glycoconjugates. Briefly, the methylene blue (MB)-tagged nucleic acid aptamer is exploited as the recognition element to selectively capture target glycoconjugate, to which a large number of ferrocene (Fc) tags are subsequently labeled via the BAC between the phenylboronic acid (PBA) group and the cis-diol site of the oligosaccharide chains on the captured targets. Using the MB tag as the internal reference and the Fc tag as the reporter of the target capture, the dual-signal output enables the ratiometric detection. Due to the presence of a high density of the cis-diol sites on a glycoconjugate, sufficiently high sensitivity can be obtained even without using any amplification strategies. Using glycoprotein mucin 1 (MUC1) as the model target, the signal ratio (I_Fc/I_MB) exhibits good linearity over the range from 0.05 to 50 U/mL, with a detection limit of 0.021 U/mL. In addition to the high sensitivity and selectivity, the results of the analysis of MUC1 in serum samples are acceptable. By virtue of its simplicity, cost-effectiveness, and high robustness and reproducibility, this BAC-based ratiometric electrochemical method holds great promise in the highly sensitive and selective detection of glycoconjugates.

Selective Separation and Analysis of Catecholamines in Urine Based on Magnetic Solid Phase Extraction by Mercaptophenylboronic Acid Functionalized Fe3O4-NH2@Au Magnetic Nanoparticles Coupled with HPLC

A novel magnetic solid phase extraction based on mercaptophenylboronic acid (MPBA)-functionalized Fe3O4-NH2@Au nanomaterial (Fe3O4-NH2@Au-MPBA) was developed for selective separation and enrichment of catecholamines (including dopamine, norepinephrine and adrenaline). Fe3O4-NH2@Au-MPBA nanoparticles were achieved by self-assembly-anchoring MPBA molecules on the surface of Fe3O4-NH2@Au nanocomposites, which were synthesized via a facial ultrasonic auxiliary in situ reduction process. The interaction between cis-diol from catecholamines and boronic acid was reversible and could be flexibly controlled by adjusting pH value. The catecholamines could be quickly adsorbed by Fe3O4-NH2@Au-MPBA in weak alkaline solution (pH 8.0–9.0) and subsequently released in acid solution (pH 1.0–2.0). The process of adsorption and dissociation was very fast. Furthermore, the three catecholamines could be detected in urine from children by high performance liquid chromatography (HPLC) with electrochemical detector. Under optimal conditions, norepinephrine (NE), epinephrine (EP) and dopamine (DA) were separated very well from internal standard and exhibited a good linearity in the range of 2.5–500.0 ng mL−1, with correlation coefficients of r2 > 0.9907. Limits of detection (LOD) (signal to noise = 3) were 0.39, 0.27 and 0.60 ng mL−1 for NE, EP and DA, respectively. Recoveries for the spiked catecholamines were in the range of 85.4–105.2% with the relative standard deviation (RSD) < 11.5%.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Multifunctional theranostic nanoparticles for biomedical cancer treatments - A comprehensive review

Modern-day search for the novel agents (their preparation and consequent implementation) to effectively treat the cancer is mainly fuelled by the historical failure of the conventional treatment modalities. Apart from that, the complexities such as higher rate of cell mutations, variable tumor microenvironment, patient-specific disparities, and the evolving nature of cancers have made this search much stronger in the latest times. As a result of this, in about two decades, the theranostic nanoparticles (TNPs) - i.e., nanoparticles that integrate therapeutic and diagnostic characteristics - have been developed. The examples for TNPs include mesoporous silica nanoparticles, luminescence nanoparticles, carbon-based nanomaterials, metal nanoparticles, and magnetic nanoparticles. These TNPs have emerged as single and powerful cancer-treating multifunctional nanoplatforms, as they widely provide the necessary functionalities to overcome the previous/conventional limitations including lack of the site-specific delivery of anti-cancer drugs, and real-time continuous monitoring of the target cancer sites while performing therapeutic actions. This has been mainly possible due to the association of the as-developed TNPs with the already-available unique diagnostic (e.g., luminescence, photoacoustic, and magnetic resonance imaging) and therapeutic (e.g., photothermal, photodynamic, hyperthermia therapy) modalities in the biomedical field. In this review, we have discussed in detail about the recent developments on the aforementioned important TNPs without/with targeting ability (i.e., attaching them with ligands or tumor-specific antibodies) and also the strategies that are implemented to increase their tumor accumulation and to enhance their theranostic efficacies for effective biomedical cancer treatments.

T cell membrane cloaking tumor microenvironment-responsive nanoparticles with a smart "membrane escape mechanism" for enhanced immune-chemotherapy of melanoma

The application of combination immune-chemotherapy makes up for the limitation of monotherapy and achieves superior antitumor activity against cancer. However, combinational therapy is always restricted by poor tumor targeted drug delivery efficacy. Herein, novel T cell membrane cloaking tumor microenvironment-responsive nanoparticles (PBA modified T cell membrane cloaking hyaluronic acid (HA)-disulfide bond-vitamin E succinate/curcumin, shortened as RCM@T) were developed. T cell membrane cloaking not only serves as a protection shell for sufficient drug delivery but also acts as a programmed cell death-1(PD-1) "antibody" to selectively bind the PD-L1 of tumor cells. When RCM@T is intravenously administrated into the blood stream, it accumulates at tumor sites and responds to an acidic pH to achieve a "membrane escape effect" and expose the HA residues of RCM for tumor targeted drug delivery. RCM accumulates in the cytoplasm via CD44 receptor mediated endocytosis and intracellularly releases antitumor drug in the intracellular redox microenvironment for tumor chemotherapy. T cell membrane debris targets the PD-L1of tumor cells for tumor immunotherapy, which not only directly kills tumor cells, but also improves the CD8+ T cell level and facilitates effector cytokine release. Taken together, the as-constructed RCM@T creates a new way for the rational design of a drug delivery system via the combination of stimuli-responsive drug release, chemotherapeutical agent delivery and cell membrane based immune checkpoint blockade immunotherapy.

Biomarker sensing platforms based on fluorescent metal nanoclusters

Metal nanoclusters (NCs) and their unique properties are increasing in importance and their applications are covering a wide range of areas. Their remarkable fluorescence properties and easy synthesis procedure and the possibility of functionalizing them for the detection of specific targets, such as biomarkers, make them a very interesting biosensing tool. Nowadays the detection of biomarkers related to different diseases is critical. In this context, NCs scaffolded within an appropriate molecule can be used to detect and quantify biomarkers through specific interactions and fluorescence properties of the NCs. These methods include analytical detection and biolocalization using imaging techniques. This review covers a selection of recent strategies to detect biomarkers related to diverse diseases (from infectious, inflammatory, or tumour origin) using fluorescent nanoclusters.

A Green-Emission Metal-Organic Framework-Based Nanoprobe for Imaging Dual Tumor Biomarkers in Living Cells

The modular nature of metal-organic frameworks (MOFs) permits their tunable structure and function for target application, such as in biomedicine. Herein, a green-emission Zr(IV)-MOF (BUT-88) was constructed from a customized luminescent carbazolyl ligand. BUT-88 represents the first bcu-type MOF with both organic linker and metal node in eight connections and shows medium-sized pores, rich accessible linking sites, and good water stability and biocompatibility. In virtue of these merits, BUT-88 was then fabricated into a MOF-based fluorescent nanoprobe, drDNA-BUT-88. Using it, the live-cell imaging of dual tumor biomarkers was achieved for the first time upon a MOF-based probe, offering enhanced detection precision in early cancer diagnosis. Particularly, the probe showed efficient ratiometric fluorescent sensing toward the cytoplasmic biomarker microRNA-21, further improving the detection accuracy at the cellular level. In this work, the elaborate combination of MOF engineering and the fluorescent detection technique has contributed a facile biosensing platform, unlocking more possibilities of MOF chemistry.

Multistimulus Responsive Biointerfaces with Switchable Bioadhesion and Surface Functions

Stimuli-responsive biointerfaces can serve as dynamic tools for modulation of biointerfacial interactions. Considering the complexity of biological environments, surfaces with multistimulus responsive switchable bioactivity are of great interest. In the work reported herein, a multistimulus responsive biointerface with on-off switchable bioadhesion (protein adsorption, bacterial adhesion, and cell adhesion) and surface functions in response to change in temperature, pH, or sugar content is developed. This surface is based on a silicon modified with a copolymer containing a thermoresponsive component (poly(N-isopropylacrylamide)) and a component, phenylboronic acid, that can form pH-responsive and sugar-responsive dynamic boronate ester bonds with diol-containing molecules. It is shown that biointeractions including protein adsorption and release, bacteria and cell attachment and detachment on this surface can be regulated by changing temperature, pH, and sugar content of the medium, either individually or all three simultaneously. Furthermore, this surface can switch between two different functions, namely between killing and releasing bacteria, by introduction of a diol-containing biocidal compound. Compared to switchable surfaces that are responsive to only one stimulus, our multistimulus responsive surface is better adapted to respond to the multifunctional complexities of the biological environment and thus has potential for use in numerous biomedical and biotechnology applications.

A nanoneedle-based reactional wettability variation sensor array for on-site detection of metal ions with a smartphone

An enhancement of the reactional wettability variation (RWV) sensing strategy is achieved based on the wettability switch of a nanoneedle surface. The sensor unit is formed by coating hydrophobic azoimidazole compounds, as the responder compounds onto the originally hydrophilic surface of cobalt hydroxide nanoneedles. The complexation reaction between metal ions and azoimidazole ligands etches the hydrophobic coating and switches the surface wettability, making the surface hydrophilic again. This switch is revealed by a decrease in the static contact angle (CA) and an increase in the sliding angle of the surface. The reactivity is tuned by the derivatization and conformational manipulation of the azoimidazole compounds. A sensor array composed of six as-tuned sensor units is constructed to distinguish among the species and concentrations of Fe³⁺, Ni²⁺ and La³⁺ at a low limit of 10^-6 M using the chemometric method of principal component analysis (PCA). In addition, a new on-site detection strategy is developed based on PCA of the sliding angle, which can be measured conveniently and swiftly with a smartphone app and a commercially available setup. The application of the general RWV strategy is envisioned to open new possibilities for on-site detection.

Recent Advances in Biomaterials Science and Engineering Research in India: A Minireview

Biomedical research in health innovation and product development encompasses convergent technologies that primarily integrate biomaterials science and engineering at its core. Particularly, research in this area is instrumental for the implementation of biomedical devices (BMDs) that offer innovative solutions to help maintain and improve quality of life of patients worldwide. Despite achieving extraordinary success, implantable BMDs are still confronted with complex engineering and biological challenges that need to addressed for augmenting device performance and prolonging lifetime in vivo. Biofabrication of tissue constructs, designing novel biomaterials and employing rational biomaterial design approaches, surface engineering of implants, point of care diagnostics and micro/nano-based biosensors, smart drug delivery systems, and noninvasive imaging methodologies are among strategies exploited for improving clinical performance of implantable BMDs. In India, advances in biomedical technologies have dramatically advanced health care over the last few decades and the country is well-positioned to identify opportunities and translate emerging solutions. In this article, we attempt to capture the recent advances in biomedical research and development progressing across the country and highlight the significant research work accomplished in the areas of biomaterials science and engineering.

Hydrothermal synthesis of N,S co-doped carbon nanodots for highly selective detection of living cancer cells

This study presents a facile synthesis method for the preparation of positively charged N,S co-doped carbon nanodots with excellent optical properties, and it develops a selective method for fluorescent detection of living cancer cells. The specific recognition is due to the application of an aptamer sequence, which shows high affinity and specificity to target cells. The aptamer is firstly labeled with BHQ and wraps around the carbon nanodots, then it finally quenches the fluorescence emission of the carbon nanodots. For the sensitive and selective analysis of target cells, the cells are simply mixed with the carbon nanodot-aptamer nanoconjugates, which are then centrifuged at a low speed. The recognition reaction between aptamer and target cells releases the quencher from the surface of the carbon nanodots and the centrifugation process enables the recovery of fluorescence intensity of the suspension, which reflects the level of initial cancer cells. The developed method is simple, highly selective and cost-effective, thus, it may be further exploited in clinical applications in the future.

Fluorescence Resonance Energy Transfer-Based Wash-Free Bacterial Imaging and Antibacterial Application Using a Cationic Conjugated Polyelectrolyte

The increase in bacterial infection and antibiotic resistance has posed a severe threat to the human health. This threat has warranted an imperative demand for the development of a new and effective bactericidal material to eradicate the antibiotic-resistant pathogenic bacteria. In this work, we report the wash-free imaging of Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) bacteria using cationic conjugated polyelectrolyte[9,9-bis(6'-methylimidazoliumbromide)hexyl-fluorene- co-4,7-(2,1,3-benzothiadiazole)] (PFBT-MI) based on aggregation-induced fluorescence resonance energy transfer (FRET). Cationic imidazolium group strapped on the polymer side chain not only increases its solubility in water but also helps in binding with the negatively charged bacterial membrane via electrostatic interactions to turn on its bright yellow emission. The change in the fluorescence color of conjugated polyelectrolyte in the presence of bacteria could be visualized very easily via naked eyes under a UV lamp (365 nm). Furthermore, the antibacterial activity of PFBT-MI against both S. aureus and E. coli was observed because of the amphiphilic nature of the conjugated polyelectrolyte which in turn is due to the presence of ionic functionality and conjugated polymer backbone that can intercalate very proficiently into the bacterial membrane, which disrupts the membrane integrity and thus results in toxicity. Morphologically, the membrane damage was perceived via field emission scanning electron microscopy (FESEM) images, which clearly indicated the disruption of cell membrane upon exposure to PFBT-MI. The PFBT-MI acts as an effective antibacterial agent, with a minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) value of (30 μM or 23.7 μg/mL) and (60 μM or 47.7 μg/mL) for S. aureus and for E. coli (60 μM or 47.7 μg/mL) and (100 μM or 79 μg/mL), respectively. Moreover, PFBT-MI shows less cytotoxicity against mammalian cells at concentration greater than MIC.