Ni2P Entwined by Graphite Layers as a Low-Pt Electrocatalyst in Acidic Media for Oxygen Reduction

Surface Tailoring-Modulated Bifunctional Oxygen Electrocatalysis with CoP for Rechargeable Zn-Air Battery and Water Splitting

The transition metal phosphide (TMP)-based functional electrocatalysts are very promising for the development of electrochemical energy conversion and storage devices including rechargeable metal-air batteries and water electrolyzer. Tuning the electrocatalytic activity of TMPs is one of the vital steps to achieve the desired performance of these energy devices. Herein, we demonstrate the modulation of the bifunctional oxygen electrocatalytic activity of nitrogen-doped carbon-encapsulated CoP (CoP@NC) nanostructures by surface tailoring with ultralow amount (0.56 atomic %) of Ru nanoparticles (2.5 nm). The CoP at the core and the Ru nanoparticles on the shell have a facile charge transfer interaction with the encapsulating NC. The strong coupling of Ru with CoP@NC boosts the electrocatalytic performance toward oxygen reduction (ORR), oxygen evolution (OER), and hydrogen evolution (HER) reactions. The surface-tailored catalyst requires only 35 mV to deliver the benchmark current density of 10 mA·cm-2 for HER. A small potential gap of 620 mV between ORR and OER is achieved, making the catalyst highly suitable for the development of rechargeable zinc-air batteries (ZABs). The homemade ZAB delivers a specific capacity of 780 mA·hgZn-1 and peak power density of 175 mW·cm-2 with a very small voltaic efficiency loss (1.1%) after 300 cycles. The two-electrode water splitting cell (CoP@NC-Ru||CoP@NC-Ru) delivers remarkably low cell voltage of 1.47 V at the benchmark current density. Stable current density of 25 mA·cm-2 for 25 h without any significant change is achieved. Theoretical studies support the charge transfer interaction-induced enhanced electrocatalytic activity of the surface-tailored nanostructure.

Interfacial Strain-Modulated Nanospherical Ni2 P by Heteronuclei-Mediated Growth on Ti3 C2 Tx MXene for Efficient Hydrogen Evolution

Interface modulation of nickel phosphide (Ni₂ P) to produce an optimal catalytic activation barrier has been considered a promising approach to enhance the hydrogen production activity via water splitting. Herein, heteronuclei-mediated in situ growth of hollow Ni₂ P nanospheres on a surface defect-engineered titanium carbide (Ti₃ C₂ T_x ) MXene showing high electrochemical activity for the hydrogen evolution reaction (HER) is demonstrated. The heteronucleation drives intrinsic strain in hexagonal Ni₂ P with an observable distortion at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface, which leads to charge redistribution and improved charge transfer at the interface between the two components. The strain at the Ni₂ P@Ti₃ C₂ T_x MXene heterointerface significantly boosts the electrochemical catalytic activities and stability toward HER in an acidic medium via a combination between experimental results and theoretical calculations. In a 0.5 m H₂ SO₄ electrolyte, the Ni₂ P@Ti₃ C₂ T_x MXene hybrid shows excellent HER catalytic performance, requiring an overpotential of 123.6 mV to achieve 10 mA cm^-2 with a Tafel slope of 39 mV dec^-1 and impressive durability over 24 h operation. This approach presents a significant potential to rationally design advanced catalysts coupled with 2D materials and transition metal-based compounds for state-of-the-art high efficiency energy conversions.

Recent Advancements in the Synthesis and Application of Carbon-Based Catalysts in the ORR

Fuel cells are a promising alternative to non-renewable energy production industries such as petroleum and natural gas. The cathodic oxygen reduction reaction (ORR), which makes fuel cell technology possible, is sluggish under normal conditions. Thus, catalysts must be used to allow fuel cells to operate efficiently. Traditionally, platinum (Pt) catalysts are often utilized as they exhibit a highly efficient ORR with low overpotential values. However, Pt is an expensive and precious metal, posing economic problems for commercialization. Herein, advances in carbon-based catalysts are reviewed for their application in ORRs due to their abundance and low-cost syntheses. Various synthetic methods from different renewable sources are presented, and their catalytic properties are compared. Likewise, the effects of heteroatom and non-precious metal doping, surface area, and porosity on their performance are investigated. Carbon-based support materials are discussed in relation to their physical properties and the subsequent effect on Pt ORR performance. Lastly, advances in fuel cell electrolytes for various fuel cell types are presented. This review aims to provide valuable insight into current challenges in fuel cell performance and how they can be overcome using carbon-based materials and next generation electrolytes.

Anchored Pt-Co Nanoparticles on Honeycombed Graphene as Highly Durable Catalysts for the Oxygen Reduction Reaction

Durability is an important factor in evaluating the performance of a catalyst. In this work, the spatial protection of the carrier to nanoparticles was considered to improve the durability of the catalyst. It is found that a honeycombed graphene with a three-dimensional (3D)-hierarchical porous structure (3D HPG) can help to reduce the shedding of Pt-Co nanoparticles (Pt-Co NPs) because 3D HPG can form a protective layer to reduce the direct erosion of Pt-Co NPs on the interface by an electrolyte. Then, appropriate oxygen groups were introduced on the 3D reduced hierarchical porous graphene oxide (3D rHPGO) to improve the dispersion of Pt-Co NPs on the surface of the carrier. It was found that the Pt d-band of the catalyst was anchored by π sites of carbonyl of an oxygen group. After optimization, the catalyst (referred to as Pt-Co/3D rHPGO) achieved a 2-fold enhancement in mass activity than that of a commercial Pt/C catalyst. More importantly, after the accelerated durability test (ADT) of 20 000 cycles, the Pt-Co/3D rHPGO catalyst can almost sustain this level of performance, whereas other catalysts showed a comparatively large loss of activity. According to the results, the high durability of Pt-Co/3D rHPGO was attributed to spatial protection of Pt-Co NPs and the defects on the surface allowed the electrolyte to enter. In addition, oxygen groups provided an anchoring effect on nanoparticles. Thus, the Pt-Co/3D rHPGO electrocatalyst exhibited splendid durability, holding a potential to be applied in PEMFC for long-term work.

Structural Evolution and Underlying Mechanism of Single-Atom Centers on Mo2C(100) Support during Oxygen Reduction Reaction

The single-metal atoms coordinating with the surface atoms of the support constitute the active centers of as-prepared single-atom catalysts (SACs). However, under hash electrochemical conditions, (1) supports' surfaces may experience structural change, which turn to be distinct from those at ambient conditions; (2) during catalysis, the dynamic responses of a single atom to the attack of reaction intermediates likely change the coordination environment of a single atom. These factors could alter the performance of SACs. Herein, we investigate these issues using Mo₂C(100)-supported single transition-metal (TM) atoms as model SACs toward catalyzing the oxygen reduction reaction (ORR). It is found that the Mo₂C(100) surface is oxidized under ORR turnover conditions, resulting in significantly weakened bonding between single TM atoms and the Mo₂C(100) surface (TM@Mo₂C(100)_O* term for SAC). While the intermediate in 2 e^- ORR does not change the local structures of the active centers in these SACs, the O* intermediate emerging in 4 e^- ORR can damage Rh@ and Cu@Mo₂C(100)_O*. Furthermore, on the basis of these findings, we propose Pt@Mo₂C(100)_O* as a qualified ORR catalyst, which exhibits extraordinary 4 e^- ORR activity with an overpotential of only 0.33 V, surpassing the state-of-the-art Pt(111), and thus being identified as a promising alternative to the commercial Pt/C catalyst.

Oxygen Reduction Reaction Catalyzed by Carbon-Supported Platinum Few-Atom Clusters: Significant Enhancement by Doping of Atomic Cobalt

Oxygen reduction reaction (ORR) plays an important role in dictating the performance of various electrochemical energy technologies. As platinum nanoparticles have served as the catalysts of choice towards ORR, minimizing the cost of the catalysts by diminishing the platinum nanoparticle size has become a critical route to advancing the technological development. Herein, first-principle calculations show that carbon-supported Pt₉ clusters represent the threshold domain size, and the ORR activity can be significantly improved by doping of adjacent cobalt atoms. This is confirmed experimentally, where platinum and cobalt are dispersed in nitrogen-doped carbon nanowires in varied forms, single atoms, few-atom clusters, and nanoparticles, depending on the initial feeds. The sample consisting primarily of Pt_2~7 clusters doped with atomic Co species exhibits the best mass activity among the series, with a current density of 4.16 A mg_Pt ^-1 at +0.85 V vs. RHE that is almost 50 times higher than that of commercial Pt/C.

N-Doped Sandwich-Structured Mo2C@C@Pt Interface with Ultralow Pt Loading for pH-Universal Hydrogen Evolution Reaction

Designing a unique electrochemical interface to exhibit Pt-like activity and good stability is indispensable for the efficient hydrogen evolution reaction (HER). Herein, we synthesize well-defined Mo₂C@NC@Pt nanospheres with a sandwich-structured interface through a facile organic-inorganic pyrolysis and following reduction process. The obtained Mo₂C@NC@Pt heterostructures with ultralow Pt loading are composed of well-dispersed Mo₂C nanoparticles (NPs) inner layer, N-doped carbon layer, and ultrafine Pt NPs outer layer. Electrochemical measurements demonstrate that Mo₂C@NC@Pt heterostructures not only exhibit superior HER activities than commercial Pt/C with small overpotentials of only 27, 47, and 25 mV to achieve a current density of 10 mA cm^-2 in acidic, alkaline, and neutral media, respectively, but also possess favorable long-term stability in pH-universal solution. The improved reaction kinetics of Mo₂C@NC@Pt heterostructures are mainly attributed to the unique sandwich-structured interface with well-defined Mo₂C NPs encapsulated by carbon layers and Pt NPs well-dispersed on the carbon support, synergistic effects among Mo₂C NPs, NC, and Pt NPs, high specific surface area, and N-doping into the catalysts. This facile approach not only provides a new pathway for preparing well-defined carbides but also gives insight into the development of low-Pt catalysts for the efficient HER.