Lipid-Modified Graphene-Transistor Biosensor for Monitoring Amyloid-β Aggregation

Controlling spatial distribution of functional lipids in a supported lipid bilayer prepared from vesicles

Conjugating biomolecules, such as antibodies, to bioconjugate moieties on lipid surfaces is a powerful tool for engineering the surface of diverse biomaterials, including cells and nanoparticles. We developed supported lipid bilayers (SLBs) presenting well-defined spatial distributions of functional moieties as models for precisely engineered functional biomolecular-lipid surfaces. We used quartz crystal microbalance with dissipation (QCM-D) and atomic force microscopy (AFM) to determine how vesicles containing a mixture of 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[azido(polyethylene glycol)-2000] (DSPE-PEG-N3) form SLBs as a function of the lipid phase transition temperature (Tm). Above the DPPC Tm, DPPC/DSPE-PEG-N3 vesicles form SLBs with functional azide moieties on SiO2 substrates via vesicle fusion. Below this Tm, DPPC/DSPE-PEG-N3 vesicles attach to SiO2 intact. Intact DPPC/DSPE-PEG-N3 vesicles on the SiO2 surfaces fuse and rupture to form SLBs when temperature is brought above the DPPC Tm. AFM studies show uniform and complete DPPC/DSPE-PEG-N3 SLB coverage of SiO2 surfaces for different DSPE-PEG-N3 concentrations. As the DSPE-PEG-N3 concentration increases from 0.01 to 6 mol%, the intermolecular spacing of DSPE-PEG-N3 in the SLBs decreases from 4.6 to 1.0 nm. The PEG moiety undergoes a mushroom to brush transition as DSPE-PEG-N3 concentration varies from 0.1 to 2.0 mol%. Via copper-free click reaction, IgG was conjugated to SLB surfaces with 4.6 nm or 1.3 nm inter-DSPE-PEG-N3 spacing. QCM-D and AFM data show; 1) uniform and complete IgG layers of similar mass and thickness on the two types of SLB; 2) a higher-viscosity/less rigid IgG layer on the SLB with 4.6 nm inter-DSPE-PEG-N3 spacing. Our studies provide a blueprint for SLBs modeling spatial control of functional macromolecules on lipid surfaces, including surfaces of lipid nanoparticles and cells.

Synthesis of Zwitterionic Phospholipid-Connected Silane Coupling Agents and Their Hybridization with Graphene Oxide

The hybridization of lipids with graphene is expected to produce a promising, novel biomaterial. However, there are limited examples of the covalent introduction of lipid molecules, especially the immobilization of lipid molecules, onto graphene on a substrate. Therefore, we investigated the hybridization of a silane coupling agent having phospholipid moieties with graphene oxide on substrates prepared by photo-oxidation using chlorine dioxide. Three silane coupling agents with different carbon chain lengths (C4, C6, C8) were synthesized and phospholipid molecules were introduced onto graphene on a substrate. Phospholipid-immobilized graphene on a grid for TEM (transmission electron microscope) was used for EM analysis of proteins (glyceraldehyde 3-phosphate dehydrogenase and β-galactosidase), enabling the observation of sufficient particles compared to the conventional graphene grid.

Interface-Engineered Field-Effect Transistor Electronic Devices for Biosensing

Promising advances in molecular medicine have promoted the urgent requirement for reliable and sensitive diagnostic tools. Electronic biosensing devices based on field-effect transistors (FETs) exhibit a wide range of benefits, including rapid and label-free detection, high sensitivity, easy operation, and capability of integration, possessing significant potential for application in disease screening and health monitoring. In this perspective, the tremendous efforts and achievements in the development of high-performance FET biosensors in the past decade are summarized, with emphasis on the interface engineering of FET-based electrical platforms for biomolecule identification. First, an overview of engineering strategies for interface modulation and recognition element design is discussed in detail. For a further step, the applications of FET-based electrical devices for in vitro detection and real-time monitoring in biological systems are comprehensively reviewed. Finally, the key opportunities and challenges of FET-based electronic devices in biosensing are discussed. It is anticipated that a comprehensive understanding of interface engineering strategies in FET biosensors will inspire additional techniques for developing highly sensitive, specific, and stable FET biosensors as well as emerging designs for next-generation biosensing electronics.

Functionalized-Graphene Field Effect Transistor-Based Biosensor for Ultrasensitive and Label-Free Detection of β-Galactosidase Produced by Escherichia coli

The detection of β-galactosidase (β-gal) activity produced by Escherichia coli (E. coli) can quickly analyze the pollution degree of seawater bodies in bathing and fishing grounds to avoid large-scale outbreaks of water pollution. Here, a functionalized biosensor based on graphene-based field effect transistor (GFET) modified with heat-denatured casein was developed for the ultrasensitive and label-free detection of the β-gal produced by E. coli in real water samples. The heat-denatured casein coated on the graphene surface, as a probe linker and blocker, plays an important role in fabricating GEFT biosensor. The GFET biosensor response to the β-gal produced by E. coli has a wide concentration dynamic range spanning nine orders of magnitude, in a concentration range of 1 fg·mL-1-100 ng·mL-1, with a limit of detection (LOD) 0.187 fg·mL-1 (1.61 aM). In addition to its attomole sensitivity, the GFET biosensor selectively recognized the β-gal in the water sample and showed good selectivity. Importantly, the detection process of the β-gal produced by E. coli can be completed by a straightforward one-step specific immune recognition reaction. These results demonstrated the usefulness of the approach, meeting environmental monitoring requirements for future use.

Kinetics of Ganglioside-Rich Supported Lipid Bilayer Formation with Tracer Vesicle Fluorescence Imaging

Gangliosides, forming a class of lipids complemented by sugar chains, influence the lateral distribution of membrane proteins or membrane-binding proteins, act as receptors for viruses and bacterial toxins, and mediate several types of cellular signaling. Gangliosides incorporated into supported lipid bilayers (SLBs) have been widely applied as a model system to examine these biological processes. In this work, we explored how ganglioside composition affects the kinetics of SLB formation using the vesicle rupturing method on a solid surface. We imaged the attachment of vesicles and the subsequent SLB formation using the time-lapse total internal reflection fluorescence microscopy technique. In the early phase, the ganglioside type and concentration influence the adsorption kinetics of vesicles and their residence/lifetime on the surface before rupturing. Our data confirm that a simultaneous rupturing of neighboring surface-adsorbed vesicles forms microscopic lipid patches on the surface and it is triggered by a critical coverage of the vesicles independent of their composition. In the SLB growth phase, lipid patches merge, forming a continuous SLB. The propagation of patch edges catalyzes the process and depends on the ganglioside type. Our pH-dependent experiments confirm that the polar/charged head groups of the gangliosides have a critical role in these steps and phases of SLB formation kinetics.

Review on two-dimensional material-based field-effect transistor biosensors: accomplishments, mechanisms, and perspectives

Field-effect transistor (FET) is regarded as the most promising candidate for the next-generation biosensor, benefiting from the advantages of label-free, easy operation, low cost, easy integration, and direct detection of biomarkers in liquid environments. With the burgeoning advances in nanotechnology and biotechnology, researchers are trying to improve the sensitivity of FET biosensors and broaden their application scenarios from multiple strategies. In order to enable researchers to understand and apply FET biosensors deeply, focusing on the multidisciplinary technical details, the iteration and evolution of FET biosensors are reviewed from exploring the sensing mechanism in detecting biomolecules (research direction 1), the response signal type (research direction 2), the sensing performance optimization (research direction 3), and the integration strategy (research direction 4). Aiming at each research direction, forward perspectives and dialectical evaluations are summarized to enlighten rewarding investigations.

Designable peptides on graphene field-effect transistors for selective detection of odor molecules

Gas sensing based on graphene field-effect transistors (GFETs) has gained broad interest due to their high sensitivity. Further progress in gas sensing with GFETs requires to detection of various odor molecules for applications in the environmental monitoring, healthcare, food, and cosmetic industries. To develop the ubiquitous odor-sensing system, establishing an artificial sense of smell with electronic devices by mimicking olfactory receptors will be key. Although the application of olfactory receptors to GFETs is straightforward for odor sensing, synthetic molecules with a similar function to olfactory receptors would be desirable to realize the robust performance of sensing. In this work, we designed three new peptides consisting of two domains: a bio-probe to the target molecules and a molecular scaffold. These peptides were rationally designed based on a motif sequence in olfactory receptors and self-assembled into a molecular thin film on GFETs. Limonene, methyl salicylate, and menthol were employed as representative odor molecules of plant flavors to demonstrate the biosensing of odor molecules. The conductivity change of GFETs against the binding to odor molecules with various concentrations and the dynamic response revealed a distinct signature of three different peptides against individual species of the target molecules. The kinetic response of each peptide exhibited characteristic time constants in the adsorption and desorption process, also supported by the principal component analysis. Our demonstration of the graphene odor sensors with the designed peptides opens a way to establish future peptide-array sensors with multi-sequence of peptide, realizing an odor sensing system with higher selectivity.

Phospholipid Monolayer/Graphene Interfaces: Curvature Effect on Lipid Morphology and Dynamics

Phospholipids are an important class of lipids that are widely used as model platforms for the study of biological processes and interactions. These lipids can form stable interfaces with solid substrates, such as graphene, and these interfaces have potential applications in biosensing and targeted drug delivery. In this paper, we perform molecular dynamics simulations of graphene-supported lipid monolayers to characterize the lipid properties of such interfaces. We observed substantial differences between the supported monolayer and free-standing bilayer in terms of the lipid properties, such as the tail order parameters, density profiles, diffusion rates, and so on. Furthermore, we studied these interfaces on sinusoidally deformed graphene substrates to understand the effect of curvature on the supported lipids. Here, we observed that the nature of the substrate curvature, that is, concave or convex, can locally affect the lipid/substrate adhesion strength and induce structural and dynamic changes in the adsorbed lipid monolayer. Together, these results help characterize the properties of lipid/graphene interfaces and provide insights into the substrate curvature effect on these interfaces, which can enable the tuning of lipid properties for various sensor devices and drug delivery applications.

A Supported Lipid Bilayer-Based Lab-on-a-Chip Biosensor for the Rapid Electrical Screening of Coronavirus Drugs

With the rapid spread and multigeneration variation of coronavirus, rapid drug development has become imperative. A major obstacle to addressing this issue is adequately constructing the cell membrane at the molecular level, which enables in vitro observation of the cell response to virus and drug molecules quantitatively, shortening the drug experiment cycle. Herein, we propose a rapid and label-free supported lipid bilayer-based lab-on-a-chip biosensor for the screening of effective inhibition drugs. An extended gate electrode was prepared and functionalized by an angiotensin-converting enzyme II (ACE2) receptor-incorporated supported lipid bilayer (SLB). Such an integrated system can convert the interactions of targets and membrane receptors into real-time charge signals. The platform can simulate the cell membrane microenvironment in vitro and accurately capture the interaction signal between the target and the cell membrane with minimized interference, thus observing the drug action pathway quantitatively and realizing drug screening effectively. Due to these label-free, low-cost, convenient, and integrated advantages, it is a suitable candidate method for the rapid drug screening for the early treatment and prevention of worldwide spread of coronavirus.

Two-Dimensional Field-Effect Transistor Sensors: The Road toward Commercialization

The evolutionary success in information technology has been sustained by the rapid growth of sensor technology. Recently, advances in sensor technology have promoted the ambitious requirement to build intelligent systems that can be controlled by external stimuli along with independent operation, adaptivity, and low energy expenditure. Among various sensing techniques, field-effect transistors (FETs) with channels made of two-dimensional (2D) materials attract increasing attention for advantages such as label-free detection, fast response, easy operation, and capability of integration. With atomic thickness, 2D materials restrict the carrier flow within the material surface and expose it directly to the external environment, leading to efficient signal acquisition and conversion. This review summarizes the latest advances of 2D-materials-based FET (2D FET) sensors in a comprehensive manner that contains the material, operating principles, fabrication technologies, proof-of-concept applications, and prototypes. First, a brief description of the background and fundamentals is provided. The subsequent contents summarize physical, chemical, and biological 2D FET sensors and their applications. Then, we highlight the challenges of their commercialization and discuss corresponding solution techniques. The following section presents a systematic survey of recent progress in developing commercial prototypes. Lastly, we summarize the long-standing efforts and prospective future development of 2D FET-based sensing systems toward commercialization.

Revealing local molecular distribution, orientation, phase separation, and formation of domains in artificial lipid layers: Towards comprehensive characterization of biological membranes

Lipids, together with molecules such as DNA and proteins, are one of the most relevant systems responsible for the existence of life. Selected lipids are able to assembly into various organized structures, such as lipid membranes. The unique properties of lipid membranes determine their complex functions, not only to separate biological environments, but also to participate in regulatory functions, absorption of nutrients, cell-cell communication, endocytosis, cell signaling, and many others. Despite numerous scientific efforts, still little is known about the reason underlying the variability within lipid membranes, and its biochemical significance. In this review, we discuss the structural complexity of lipid membranes, as well as the importance to simplify studied systems in order to understand phenomena occurring in natural, complex membranes. Such systems require a model interface to be analyzed. Therefore, here we focused on analytical studies of artificial systems at various interfaces. The molecular structure of lipid membranes, specifically the nanometric thickens of molecular bilayer, limits in a major extent the choice of highly sensitive methods suitable to study such structures. Therefore, we focused on methods that combine high sensitivity, and/or chemical selectivity, and/or nanometric spatial resolution, such as atomic force microscopy, nanospectroscopy (tip-enhanced Raman spectroscopy, infrared nanospectroscopy), phase modulation infrared reflection-absorption spectroscopy, sum-frequency generation spectroscopy. We summarized experimental and theoretical approaches providing information about molecular structure and composition, lipid spatial distribution (phase separation), organization (domain shape, molecular orientation) of lipid membranes, and real-time visualization of the influence of various molecules (proteins, drugs) on their integrity. An integral part of this review discusses the latest achievements in the field of lipid layer-based biosensors.

Measurement methods of single cell drug response

In the last decades, a wide multitude of research activity has been focused on the development of new drugs, and devoted to overcome the challenges of high cost and low efficiency in drug evaluation. The measurement of drug response at the single cell level is a quicker, more direct and more accurate way to reflect drug efficacy, which can shorten the drug development period and reduce research costs. Therefore, the single cell drug response (SCDR) measurement technology has aroused extensive attention from researchers, and has become a hot topic in the fields of drug research and cell biology. Recent years have seen the emergence of various SCDR measurement technologies that feature different working principles and different levels of measurement performance. To better examine, compare and summarize the characteristics and functions of these technologies, we select signal-to-noise ratio, throughput, content, invasion, and device complexity as the criteria to evaluate them from the drug efficacy perspective. This review aims to highlight sixteen kinds of SCDR measurement technologies, including patch-clamp technique, live-cell interferometry, capillary electrophoresis, secondary ion mass spectrometry, and more, and report widespread representative examples of SCDR measurement the recent approaches for over the past forty years. Based on their reaction principles, these technologies are classified into four categories: electrical, optical, electrochemical, and mass spectrometry, and a detailed comparison is made between them. After in-depth understanding of these technologies, it is expected to improve or integrate these technologies to propose better SCDR measurement strategies, and explore methods in new drug development and screening, as well as disease diagnosis and treatment.

Ionic contrast across a lipid membrane for Debye length extension: towards an ultimate bioelectronic transducer

Despite technological advances in biomolecule detections, evaluation of molecular interactions via potentiometric devices under ion-enriched solutions has remained a long-standing problem. To avoid severe performance degradation of bioelectronics by ionic screening effects, we cover probe surfaces of field effect transistors with a single film of the supported lipid bilayer, and realize respectable potentiometric signals from receptor-ligand bindings irrespective of ionic strength of bulky solutions by placing an ion-free water layer underneath the supported lipid bilayer. High-energy X-ray reflectometry together with the circuit analysis and molecular dynamics simulation discovered biochemical findings that effective electrical signals dominantly originated from the sub-nanoscale conformational change of lipids in the course of receptor-ligand bindings. Beyond thorough analysis on the underlying mechanism at the molecular level, the proposed supported lipid bilayer-field effect transistor platform ensures the world-record level of sensitivity in molecular detection with excellent reproducibility regardless of molecular charges and environmental ionic conditions.

Clinically oriented Alzheimer's biosensors: expanding the horizons towards point-of-care diagnostics and beyond

The development of minimally invasive and easy-to-use sensor devices is of current interest for ultrasensitive detection and signal recognition of Alzheimer's disease (AD) biomarkers. Over the years, tremendous effort has been made on diagnostic platforms specifically targeting neurological markers for AD in order to replace the conventional, laborious, and invasive sampling-based approaches. However, the sophistication of analytical outcomes, marker inaccessibility, and material validity strongly limit the current strategies towards effectively predicting AD. Recently, with the promising progress in biosensor technology, the realization of a clinically applicable sensing platform has become a potential option to enable early diagnosis of AD and other neurodegenerative diseases. In this review, various types of biosensors, which include electrochemical, fluorescent, plasmonic, photoelectrochemical, and field-effect transistor (FET)-based sensor configurations, with better clinical applicability and analytical performance towards AD are highlighted. Moreover, the feasibility of these sensors to achieve point-of-care (POC) diagnosis is also discussed. Furthermore, by grafting nanoscale materials into biosensor architecture, the remarkable enhancement in durability, functionality, and analytical outcome of sensor devices is presented. Finally, future perspectives on further translational and commercialization pathways of clinically driven biosensor devices for AD are discussed and summarized.

Unexpected Function of a Heptapeptide-Conjugated Zwitterionic Polymer that Coassembles into β-Amyloid Fibrils and Eliminates the Amyloid Cytotoxicity

Fibrillogenesis of amyloid β-protein (Aβ) is pathologically associated with Alzheimer's disease (AD), so modulating Aβ aggregation is crucial for AD prevention and treatment. Herein, a zwitterionic polymer with short dimethyl side chains (pID) is synthesized and conjugated with a heptapeptide inhibitor (Ac-LVFFARK-NH₂, LK7) to construct zwitterionic polymer-inhibitor conjugates for enhanced inhibition of Aβ aggregation. However, it is unexpectedly found that the LK7@pID conjugates remarkably promote Aβ fibrillization to form more fibrils than the free Aβ system but effectively eliminate Aβ-induced cytotoxicity. Such an unusual behavior of the LK7@pID conjugates is unraveled by extensive mechanistic studies. First, the hydrophobic environment within the assembled micelles of LK7@pID promotes the hydrophobic interaction between Aβ molecules and LK7@pID, which triggers Aβ aggregation at the very beginning, making fibrillization occur at an earlier stage. Second, in the aggregation process, the LK7@pID micelles disassemble by the intensive interactions with Aβ, and LK7@pID participates in the fibrillization by being embedded in the Aβ fibrils, leading to the formation of hybrid and heterogeneous fibrillar aggregates with a different structure than normal Aβ fibrils. This unique Trojan horse-like feature of LK7@pID conjugates has not been observed for any other inhibitors reported previously and may shed light on the design of new modulators against β-amyloid cytotoxicity.

Nanoindentation of Graphene/Phospholipid Nanocomposite: A Molecular Dynamics Study

Graphene and phospholipids are widely used in biosensing and drug delivery. This paper studies the mechanical and electronic properties of a composite based on two graphene flakes and dipalmitoylphosphatidylcholine (DPPC) phospholipid molecules located between them via combination of various mathematical modeling methods. Molecular dynamics simulation showed that an adhesion between bilayer graphene and DPCC increases during nanoindentation of the composite by a carbon nanotube (CNT). Herewith, the DPPC molecule located under a nanotip takes the form of graphene and is not destroyed. By the Mulliken procedure, it was shown that the phospholipid molecules act as a "buffer" of charge between two graphene sheets and CNT. The highest values of electron transfer in the graphene/DPPC system were observed at the lower indentation point, when the deflection reached its maximum value.

The Study of HIV-1 Vpr-Membrane and Vpr-hVDAC-1 Interactions by Graphene Field-Effect Transistor Biosensors

The viral protein R (Vpr) of human immunodeficiency virus 1 (HIV-1) is involved in many cellular processes during the viral life cycle; however, its associated mechanisms remain unclear. Here, we designed an Escherichia coli expression construct to achieve a milligram yield of recombinant Vpr. In addition, we fabricated a graphene field-effect transistor (G-FET) biosensor, with the modification of a supported lipid bilayer (SLB), to study the interaction between Vpr and its interaction partners. The Dirac point of the SLB/G-FET was observed to shift in response to the binding of Vpr to the SLB. By fitting the normalized shift of the Dirac point as a function of Vpr concentration to the Langmuir adsorption isotherm equation, we could extract the dissociation constant (K_d) to quantify the Vpr binding affinity. When the 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG) membrane was used as the SLB, the dissociation constant was determined to be 9.6 ± 2.1 μM. In contrast, only a slight shift of the Dirac point was observed in response to the addition of Vpr when the 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) membrane was used as the SLB. Taking advantage of the much weaker binding of Vpr to the DOPC membrane, we prepared a human voltage-dependent anion channel isoform 1 (hVDAC-1)-embedded DOPC membrane as the SLB for the G-FET and used it to determine the dissociation constant to be 5.1 ± 0.9 μM. In summary, using the clinically relevant Vpr protein as an example, we demonstrated that an SLB/G-FET biosensor is a suitable tool for studying the interaction between a membrane-associated protein and its interaction partners.

Potential of Microfluidics and Lab-on-Chip Platforms to Improve Understanding of "prion-like" Protein Assembly and Behavior

Human aging is accompanied by a relevant increase in age-associated chronic pathologies, including neurodegenerative and metabolic diseases. The appearance and evolution of numerous neurodegenerative diseases is paralleled by the appearance of intracellular and extracellular accumulation of misfolded proteins in affected brains. In addition, recent evidence suggests that most of these amyloid proteins can behave and propagate among neural cells similarly to infective prions. In order to improve understanding of the seeding and spreading processes of these "prion-like" amyloids, microfluidics and 3D lab-on-chip approaches have been developed as highly valuable tools. These techniques allow us to monitor changes in cellular and molecular processes responsible for amyloid seeding and cell spreading and their parallel effects in neural physiology. Their compatibility with new optical and biochemical techniques and their relative availability have increased interest in them and in their use in numerous laboratories. In addition, recent advances in stem cell research in combination with microfluidic platforms have opened new humanized in vitro models for myriad neurodegenerative diseases affecting different cellular targets of the vascular, muscular, and nervous systems, and glial cells. These new platforms help reduce the use of animal experimentation. They are more reproducible and represent a potential alternative to classical approaches to understanding neurodegeneration. In this review, we summarize recent progress in neurobiological research in "prion-like" protein using microfluidic and 3D lab-on-chip approaches. These approaches are driven by various fields, including chemistry, biochemistry, and cell biology, and they serve to facilitate the development of more precise human brain models for basic mechanistic studies of cell-to-cell interactions and drug discovery.

Improving the Sensory Properties of Layered Phospholipid-Graphene Films Due to the Curvature of Graphene Layers

This article is devoted to the in silico study of the sensory properties of mono- and bilayer phospholipid-graphene films with planar and curved graphene sheets. The DPPC (dipalmitoylphosphatidylcholine) molecules are considered as phospholipid structures. These molecules are part of lipid bilayers, liposomes and cell membranes. To find a way to improve the sensory properties of phospholipid-graphene films, we studied the effect of the curvature of the graphene sheet on the charge transfer and electrical conductivity of the films. The distribution of the electron charge density over the film atoms was calculated using the self-consistent-charge density-functional tight-binding method (SCC-DFTB). The calculation of the current through phospholipid-graphene films was carried out within the framework of the Landauer-Buttiker formalism using the Keldysh nonequilibrium Green function technique. As a result of the calculations, the optimal configuration of the arrangement of DPPC molecules between two graphene layers was established. This configuration provides the maximum possible increase in current to 1 μA at low voltages of ~0.2 V and is achieved for curved graphene with a radius of curvature of ~2.7 nm at individual points of graphene atomic network.

Supported Lipid Bilayer Formation from Phospholipid-Fatty Acid Bicellar Mixtures

Supported lipid bilayers (SLBs) are versatile cell membrane-mimicking biointerfaces for various applications such as biosensors and drug delivery systems, and there is broad interest in developing simple, cost-effective methods to achieve SLB fabrication. One promising approach involves the deposition of quasi-two-dimensional bicelle nanostructures that are composed of long-chain phospholipids and either short-chain phospholipids or detergent molecules. While a variety of long-chain phospholipids have been used to prepare bicelles for SLB fabrication applications, only two short-chain phospholipids, 1,2-dihexanoyl-sn-glycero-3-phosphocholine and 1,2-diheptanoyl-sn-glycero-3-phosphocholine (collectively referred to as DHPC), have been investigated. There remains an outstanding need to identify natural alternatives to DHPC, especially ones that are more affordable, to improve fabrication prospects and application opportunities. Herein, we explored the potential to fabricate SLBs from bicellar mixtures composed of long-chain phospholipids and lauric acid (LA), which is a low-cost, naturally abundant fatty acid that is widely used in soapmaking and various industrial applications. Quartz crystal microbalance-dissipation (QCM-D) experiments were conducted to track bicelle adsorption onto silica surfaces as a function of bicelle composition and lipid concentration, along with time-lapse fluorescence microscopy imaging and fluorescence recovery after photobleaching (FRAP) experiments to further characterize lipid adlayer properties. The results identified optimal conditions where it is possible to efficiently form SLBs from LA-containing bicelles at low lipid concentrations while also unraveling mechanistic insights into the bicelle-mediated SLB formation process and verifying that LA-containing bicelles are biocompatible with human cells for surface coating applications.