Metal-Organic Framework-Derived Hollow Carbon Nanocubes for Fast Solid-Phase Microextraction of Polycyclic Aromatic Hydrocarbons

Enhancing the water-resistance of MOF-199 film through incorporation of microporous organic networks for solid-phase microextraction of BTEX in aqueous environments with improved efficiency

BACKGROUND

The practical application of moisture sensitive metal organic frameworks (MOFs) in extraction technology faces challenges related to competitive adsorption and water stability. The target analytes cannot be effectively extracted under humid conditions due to the competitive moisture adsorption and/or framework structure collapse of MOFs. In this study, the microporous organic networks (MONs) were synthesized through Sonogashira coupling reaction to use for hydrophobic modification on the surface of MOF-199.

RESULTS

The MOF-199@MON as coating was deposited on stainless steel wires for solid-phase microextraction (SPME) of benzene series (BTEX) in aqueous environments. Under the optimal extraction conditions, the MOF-199@MON coated fiber for SPME coupled with GC-MS for the determination of BTEX gave the linear range of 0.5-500 μg L-1, the limit of detections (LODs, S/N = 3) of 0.01-0.04 μg L-1, the limit of quantifications (LOQs, S/N = 10) of 0.04-0.12 μg L-1, the enhancement factors of 3567-4878, and the intra-day, inter-day and fiber-to-fiber precisions (relative standard deviations, RSDs) of 1.0-9.8, 1.9-7.9 and 4.5-9.5 %, respectively. The developed method was successfully applied to the analysis of BTEX in water samples with the recoveries of 71.0 %-113 %.

SIGNIFICANCE

This work reveals the home-made SPME fibers have a long service life (the extraction efficiency of fiber decreased by only 7.26 %-13.14 % after 100 cycles). The potential of MON functionalized MOFs as effective adsorbents for the SPME of pollutants in the water environment.

Metal-Organic Framework-Based Composites for the Adsorption Removal of Per- and Polyfluoroalkyl Substances from Water

The increasing health risks posed by per- and polyfluoroalkyl substances (PFASs) in the environment highlight the importance of implementing effective removal techniques. Conventional wastewater treatment processes are inadequate for removing persistent organic pollutants. Recent studies have increasingly demonstrated that metal-organic frameworks (MOFs) are capable of removing PFASs from water through adsorption techniques. However, there is still constructive discussion on the potential of MOFs in adsorbing and removing PFASs for large-scale engineering applications. This review systematically investigates the use of MOFs as adsorbents for the removal of PFAS in water treatment. This primarily involved a comprehensive analysis of existing literature to understand the adsorption mechanisms of MOFs and to identify factors that enhance their efficiency in removing PFASs. We also explore the critical aspects of regeneration and stability of MOFs, assessing their reusability and long-term performance, which are essential for large-scale water treatment applications. Finally, our study highlights the challenges of removing PFASs using MOFs. Especially, the efficient removal of short-chain PFASs with hydrophilicity is a major challenge, while medium- to long-chain PFASs are frequently susceptible to being captured from water by MOFs through multiple synergistic effects. The ion-exchange force may be the key to solving this difficulty, but its susceptibility to ion interference in water needs to be addressed in practical applications. We hope that this review can provide valuable insights into the effective removal and adsorption mechanisms of PFASs as well as advance the sustainable utilization of MOFs in the field of water treatment, thereby presenting a novel perspective.

Quinoline Bridging Hyperconjugated Covalent Organic Framework as Solid-Phase Microextraction Coating for Ultrasensitive Determination of Phthalate Esters in Water Samples

Phthalate esters (PAEs) are widely distributed in the environment, and this has caused serious health and safety concerns. Development of rapid and ultrasensitive identification and analysis methods for phthalate esters is urgent and highly desirable. In this work, a novel nitrogen-rich covalent organic framework (N-TTI) derived quinoline bridging covalent organic framework (N-QTTI) was fabricated and used as a solid-phase microextraction (SPME) coating for the ultrasensitive determination of phthalate esters in water samples. The physical and chemical properties of N-QTTI were investigated sufficiently. The N-QTTI-coated fiber demonstrates a superior enrichment performance than either the N-TTI-coated fiber or commercial fibers under the optimized SPME conditions. For the first time, we propose a semi-immersion strategy for the extraction of PAEs from water samples based on N-QTTI-coated SPME fibers. Combined with gas chromatography-mass spectrometry (GC-MS), the developed method N-QTTI-SPME-GC-MS exhibits a wide linear range with a satisfactory linearity (R2 ≥ 0.995). The limits of detection (LOD, S/N = 3) and the limits of quantification (LOQs, S/N = 10) were 0.17-1.70 and 0.57-5.60 ng L-1, respectively. The repeatability of the new method was examined using relative standard deviations (RSDs) between intraday and interday data, which were 0.38-7.98% and 1.22-6.60%, respectively. The spiked recoveries at three levels of 10, 100, and 1000 ng L-1 were in the range of 90.0-106.2% with RSDs of less than 7.48%. The enrichment factors ranged from 291 to 17180. When compared to previously published works, the LODs of the newly established method were improved 5-5400 times, and the enrichment factors were increased by at least 8 times. The absorption mechanism was investigated by X-ray photoelectron spectroscopy and noncovalent interaction force analysis. The technique was successfully employed for detecting PAEs in water samples.

Fabrication of covalent organic frameworks modified nanofibrous membrane for efficiently enriching and detecting the trace polychlorinated biphenyls in water

Enriching and detecting the trace pollutants in actual matrices are critical to evaluating the water quality. Herein, a novel nanofibrous membrane, named PAN-SiO₂@TpPa, was prepared by in situ growing β-ketoenamine-linked covalent organic frameworks (COF-TpPa) on the aminated polyacrylonitrile (PAN) nanofibers, and adopted for enriching the trace polychlorinated biphenyls (PCBs) in various natural water body (river, lake and sea water) through the solid-phase micro-extraction (SPME) process. The resulted nanofibrous membrane owned abundant functional groups (-NH-, -OH and aromatic groups), outstandingly thermal and chemical stability, and excellent ability in extracting PCBs congeners. Based on the SPME process, the PCBs congeners could be quantitatively analyzed by the traditional gas chromatography (GC) method, with the satisfactory linear relationship (R²>0.99), low detection limit (LODs, 0.1∼5 ng L^-1), high enrichment factors (EFs, 2714∼3949) and multiple recycling (>150 runs). Meanwhile, when PAN-SiO₂@TpPa was adopted in the real water samples, the low matrix effects on the enrichment of PCBs at both 5 and 50 ng L^-1 over PAN-SiO₂@TpPa membrane firmly revealed the feasibility of enriching the trace PCBs in real water. Besides, the related mechanism of extracting PCBs on PAN-SiO₂@TpPa mainly involved the synergistic effect of hydrophobic effect, π-π stacking and hydrogen bonding.

Two-Dimensional Nitrogen-Doped Carbon Nanosheets Derived from g-C3N4 /ZIF-8 for Solid-Phase Microextraction in Exhalation of Esophageal Cancer Patients

Here, two-dimensional (2D) nitrogen-doped carbon nanosheets (CNSs) were prepared through carbonizing MOFs (ZIF-8) in-situ grown using graphitic carbon nitride (g-C₃N₄) as a template. The developed ZIF-8 CNS was then used as solid-phase microextraction (SPME) fiber coating for beneficiation of five biomarkers in exhalation of patients with esophageal cancer and in gas chromatography-mass spectrometry (GC-MS) for determination. The ZIF-8 CNS fiber exhibits satisfactory enrichment factors (3490-5631), wide linearity (5-1000 μg L^-1), and low detection limits (0.26-0.96 μg L^-1). The relative standard deviations (RSDs) for six replicate extractions of the same ZIF-8 CNS fiber were between 2.0-3.9% (intra-day) and 2.8-5.2% (inter-day). The reproducibility of three fibers prepared by the same approach was in the range 6.8-12.3% (RSD). The developed ZIF-8 CNS fiber can persist in 120 SPME cycles with no prominent loss of extraction efficiency and precision. The high enrichment factors of the 2D ZIF-8 CNS coatings are attributed to the high specific surface area, ultrathin thickness, and nano-pore or interlayer channels; moreover, nitrogen doping also endows the π system with a strong electron absorption ability, which will enhance the π-π interaction between the ZIF-8 CNS and the aromatic ring. Ultimately, the self-made ZIF-8 CNS-coated SPME fiber was applied to the analysis of exhaled breath samples. The recoveries of spiked analytes are between 84 and 105%.

[Hollow bimetal-organic framework material as solid-phase microextraction fiber coating for highly sensitive detection of polycyclic aromatic hydrocarbons]

Polycyclic aromatic hydrocarbons (PAHs) are among the most harmful persistent organic pollutants that possess high carcinogenicity and teratogenicity; hence, establishing a highly sensitive analytical method for monitoring PAHs in environmental samples is an urgent need. However, due to the low PAHs content in environmental samples and the complex matrix of the samples, it is difficult to directly determine the amount of PAHs using the existing analytical instruments. Therefore, an essential pretreatment of environmental samples should be carried out before instrumental analysis. In most pretreatment techniques, the extraction efficiency depends on the characteristics of the extraction materials. Currently, metal-organic framework materials (MOFs), which are porous materials self-assembled by metal ions and organic ligands, are used as solid-phase microextraction (SPME) coating materials for the extraction of PAHs. However, the following problems limit the application of MOFs in the SPME field: (1) MOF coating materials often require a long equilibration time for extraction because the it is difficult for the target to reach the deep adsorption sites; (2) In addition, most MOFs are formed by the coordination of single metal ions with organic monomers. The single type of open metal active sites is not conducive for realizing high extraction performance. In this study, a hollow bimetal-organic framework (H-BiMOF) was synthesized by the solvothermal method and characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), nitrogen adsorption-desorption analysis, thermogravimetric analysis, etc. The TEM images and XRD patterns demonstrated the successful synthesis of H-BiMOF with a hollow structure, which was formed through the competitive coordination between benzoic acid and water. The H-BiMOF material showed type-Ⅳ isotherms with a surface area of 1437 m²/g and excellent thermal stability. Subsequently, a H-BiMOF-coated SPME fiber was prepared by the physical adhesion method and used to extract trace PAHs from environmental samples. Due to the hollow structure of H-BiMOF, the prepared fibers offer the advantages of high utilization of specific surface area as well as short mass transfer distance, so that the extraction process quickly reaches equilibrium. At the same time, the introduction of bimetals provides a variety of metal active sites, which improves the extraction efficiency of the fiber against electron-rich cloud targets such as PAHs. The prepared fiber also had good service life, with at least 150 cycles. Combined with gas chromatography-tandem mass spectrometry (GC-MS/MS), a new method for the determination of PAHs in environmental water samples was established. Single factor experiments were performed to investigate the effects of the SPME conditions on the analytical performance. Under the optimal conditions, the established method showed low limits of detection (0.01-0.08 ng/L), wide linear range (0.03-500.0 ng/L), good linearity (correlation coefficients≥0.9986), and acceptable reproducibility (relative standard deviations≤9.8%, n=5). Finally, typical water samples were analyzed by the established method. Four environmental water samples were collected from Dianchi Lake, Poyang Lake, Taihu Lake, and Xihu Lake in China. No benzo(a)anthracene (BaA) and chrysene (CHR) were detected in any of the water samples. However, 17.9 ng/L of fluorene (FLU) and 5.3 ng/L of phenanthrene (PHE) were found in the Poyang Lake sample; 11.3 ng/L of fluoranthene (FLA) and 24.2 ng/L of pyrene (PYR) were found in the Taihu Lake sample; 50.0 ng/L of FLU, 19.5 ng/L of PHE, 14.9 ng/L of anthracene (ANT), 34.2 ng/L of FLA, and 44.5 ng/L of PYR were found in the Xihu Lake sample. The contents of the PAHs detected in all the lake water samples were lower than the Chinese National Standard GB 5749-2006 (2000.0 ng/L). The results of this study indicate that the developed method is suitable for the sensitive detection of trace levels of PAHs in real environmental water samples.

In situ fabrication of nitrogen doped graphitic carbon networks coating for high-performance extraction of pyrethroid pesticides

The tailor-prepare solid phase microextraction (SPME) coatings with stable and excellent properties to effectively extract analytes from sample matrix still remains a challenge. Herein, a nitrogen doped graphitic carbon networks (NG-CNTW) coated fiber was fabricated by direct carbonization of nanosized ZIF-67 crystals (nano-ZIF-67) that grown on stainless steel wire. The NG-CNTW coated fiber coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS) was applied for enrichment and determination of pyrethroids. The NG-CNTW coating exhibited high surface area and hierarchical porous structures that facilitate diffusion and accessibility of target molecules. Simultaneously, the nitrogen doped and highly graphitic structures endow the coating with high adsorption affinity for aromatic compounds. Under optimum conditions, the SPME-GC-MS/MS method presented wide range of linearity performance (0.08-200.0 ng g^-1), low limits of detection (0.02-0.5 ng g^-1) and good repeatability (RSD < 9.6%) for 8 kinds of pyrethroids. Furthermore, the proposed method was successfully applied in the determination of pyrethroids in grape and cauliflower samples, as the results were in the range of 3.16-15.06 ng g^-1and 2.08-9.29 ng g^-1, respectively. This work not only provides a new method by fabricating carbon nanomaterial coatings in situ derived from MOFs, but also shows great potential of MOFs derivative materials in environmental analysis field.

[Research progress in application of metal-organic framework-derived materials to sample pretreatment]

Sample pretreatment technology plays a vital role throughout the analysis of complex samples. Sample pretreatment can not only increase the concentration of trace targets in the sample, but also effectively eliminate interference from the sample matrix in instrumental analysis. Adsorbent materials are a key component of sample pretreatment technology. Therefore, the development of efficient and stable new adsorbent materials has acquired significance in research on pretreatment technology. Porous materials are advantageous for use in diverse applications, such as in adsorbents, when they possess controllable nanostructures, a tailored pore surface chemistry, and abundant porosity, and are inexpensive. Particularly in recent years, porous materials derived from metal-organic frameworks (MOFs) feature excellent properties, such as diverse morphology and structure, adjustable pore size, high specific surface area, good thermal stability, and chemical resistance. MOF-derived materials, when used as adsorbents for sample pretreatment, offer the following advantages: (1) The porous materials derived from MOFs typically possess a larger specific surface area than other porous materials. This characteristic is beneficial to improve the extraction capacity and extraction efficiency via an increase in the contact area between the materials and targets; (2) The microscopic porous structure of MOF-derived materials can be easily tuned (by controlling the temperature and time during pyrolysis, gas atmosphere, and heating rate), which is conducive to improve the selectivity of sample pretreatment methods; (3) The metal active sites can be evenly distributed. Owing to the ordered distribution of metal ions in the precursor MOFs and a good periodic framework structure, the metal active sites of the derivatives formed can still maintain a corresponding distance. These metal active sites will not form agglomerates and affect the extraction performance; conversely, other porous materials often require extremely complicated processes to achieve a uniform distribution; (4) Heteroatoms such as nitrogen and sulfur can be easily doped on the framework of MOF-derived porous materials. This doping enables the materials to induce additional interactions such as hydrogen bonding and π-π stacking for adsorbing target analytes. The excellent properties of MOF-derived materials make them promising for use in sample pretreatment. Novel sample pretreatment methods that use MOF-derived materials are constantly being developed. However, the use of MOF-derived materials is limited by the complex preparation process and high production cost of MOF precursors, along with difficulties in mass production. Further, the precise design or functionalization of MOF-derived materials according to the characteristics of targets is a new direction with immense challenges as well as application potential. This review summarizes the application of MOF-derived materials in sample pretreatment methods, including dispersive solid phase extraction (dSPE), magnetic solid phase extraction (MSPE), solid phase microextraction (SPME), stir bar sorptive extraction (SBSE), and dispersive micro solid phase extraction (DMSPE). The preparation methods, functional control, and enrichment efficiencies of various MOF-derived materials are also reviewed. Finally, the application prospects of MOF-derived materials in sample pretreatment are discussed to provide a clear outlook and reference for further related research.

Oxygenated carbon nanotubes cages coated solid-phase microextraction fiber for selective extraction of migrated aromatic amines from food contact materials

In this study, an oxygenated carbon nanotubes cages (OCNTCs) material was prepared by calcinating zeolitic imidazole framework-67 (ZIF-67) and then oxidizing the resulting material. The OCNTCs was used as a high efficient solid-phase microextraction (SPME) coating to extract aromatic amines (AAs). The obtained fiber exhibited high selectivity for AAs over other organic compounds in food contact materials (FCMs) due to matched pore size and abundant oxygen-containing groups. Subsequently, coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS), a sensitive method with low limits of detection (0.1-2.0 ng L^-1), wide linear ranges (0.5-500 ng L ^-1) and good precision (RSDs ≤ 8.6%) was developed for analysis of AAs. The specific migrated AAs from food simulants that prepared by standardized migration and thermal migration test were successfully analysed by this developed method with satisfactory recoveries (81.6% - 118.1%) and precision (RSDs, 2.1-9.5%). The results demonstrated that the prepared OCNTCs-coated fibers displayed excellent extraction performance, suggesting a promising application to investigate the migration behaviors of AAs.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

The effects of functional groups on the sorption of naphthalene on microplastics

Ubiquitous microplastics were recognized as an ideal carrier for polycyclic aromatic hydrocarbons (PAHs) to spread in nature or transfer to biota, thus posing risks to human health. However, little is known about how the functional groups in PAH derivatives influence their sorption onto microplastics as compared to parent PAHs. This study investigated the sorption of naphthalene (NAP) and its derivatives onto polystyrene microspheres with (MP-COOH) or without (MP) surface modification of the carboxyl group. NAP derivatives with charged groups (e.g., -NH₂, -OH and -COOH) reached the sorption equilibrium more early than NAP and its derivative with an uncharged group (e.g., -CH₃), whereas their sorption capacities (K_d = 6.0-8.4 L/g for MP, K_d = 4.5-6.3 L/g for MP-COOH) were significantly lower than that of the latter (K_d = 11.6-12.0 L/g for MP, K_d = 9.4-10.0 L/g for MP-COOH). The inhibition of charged groups on sorption could be attributed to their facilitation on molecular polarity and, thus, their lower hydrophobicity (LogK_OW) since hydrophobicity was the crucial factor controlling the sorption of NAP and NAP derivatives onto both MP and MP-COOH. Computational modeling further showed that charged functional groups would weaken the π-π interaction or strengthen the repulsion between NAP or NAP derivative molecule and MP or MP-COOH molecule, which might also contribute to the suppressed sorption. This study provides new insight into the affinity of PAH derivatives with microplastics, which, therefore, improves our understanding of the environmental fates of microplastics and the organic pollutants.

The effect of different binders on the comprehensive performance of solid phase microextraction fiber

Binders are significant components for the preparation of solid-phase microextraction (SPME) fibers. However, little attention has been paid to the effect of different binders. Considering their diverse properties, in this work, we select three kinds of commonly used binders including polydimethylsiloxane (PDMS), polyacrylonitrile (PAN) and Nafion, as well as introduce a new binder of poly (vinylidene fluoride) (PVDF) to synthetically study the influence of binders. By using the commercial active carbons (ACs) with different binders, four SPME fibers with uniform morphologies and comparative thicknesses (i.e., ACs-PDMS-coated, ACs-PAN-coated, ACs-Nafion-coated and ACs-PVDF-coated fibers) have been prepared successfully. The effect of binders on the pore structure of ACs is firstly investigated. It is found that PDMS and PAN would cause pore blocking, and the specific surface area of ACs coatings decreases from 1362 m² g^-1 to 280 and 196 m² g^-1, respectively. While the specific surface area of ACs-PVDF composite remains 940 m² g^-1. Based on SPME, the influences of acid/alkali, high temperature and matrix towards different fibers are further systematically surveyed. Finally, the enrichment performance of prepared fibers towards various organic pollutants is preliminarily discussed. The comparison results show that PVDF demonstrates outstanding stability in all aspects. Therefore, PVDF might be an excellent candidate for the preparation of SPME fiber. Moreover, all obtained results are expected to provide the reference value for the further development of novel SPME fibers.

MOF-Derived Isolated Fe Atoms Implanted in N-Doped 3D Hierarchical Carbon as an Efficient ORR Electrocatalyst in Both Alkaline and Acidic Media

In order to improve the catalytic performance of oxygen reduction reaction (ORR), it is pivotal to increase the density and accessibility of the active sites. Herein, we have developed a template-free melamine-assisted cocalcined strategy to afford Fe-embedded and N-doped carbons (Fe-N-C) with not only high density of atomically dispersed Fe-N_x active sites but also abundant three-dimensional interconnected mesopores by directly pyrolyzing Fe-ZIF-8 covered with a controllable melamine layer. It is demonstrated that the introduction of melamine in the precursor plays a key role in constructing various carbonized products with controllable morphology, porosity, and components. With an optimal mass ratio 1:1 of melamine to Fe-ZIF-8, the resultant Fe@MNC-1 exhibits excellent ORR activity and stability, which exceeds 20 wt % commercial Pt/C catalyst (with a half-wave potential of 0.88 V vs 0.85 V) in an alkaline electrolyte and is even comparable to the commercial Pt/C catalyst (with a half-wave potential of 0.78 V vs 0.80 V) in an acidic electrolyte. To the best of our knowledge, Fe@MNC-1 can be ranked among the best nonprecious metal electrocatalysts for ORR in both alkaline and acidic media. The present synthetic strategy may provide a new opportunity for the design and construction of metal-organic framework-derived nanomaterials with rational composition and a desired porous structure to boost their electrocatalytic performance.

Nontargeted Detection Methods for Food Safety and Integrity

Nontargeted workflows for chemical hazard analyses are highly desirable in the food safety and integrity fields to ensure human health. Two different analytical strategies, nontargeted metabolomics and chemical database filtering, can be used to screen unknown contaminants in food matrices. Sufficient mass and chromatographic resolutions are necessary for the detection of compounds and subsequent componentization and interpretation of candidate ions. Analytical chemistry–based technologies, including gas chromatography–mass spectrometry (GC-MS), liquid chromatography–mass spectrometry (LC-MS), nuclear magnetic resonance (NMR), and capillary electrophoresis–mass spectrometry (CE-MS), combined with chemometrics analysis are being used to generate molecular formulas of compounds of interest. The construction of a chemical database plays a crucial role in nontargeted detection. This review provides an overview of the current sample preparation, analytical chemistry–based techniques, and data analysis as well as the limitations and challenges of nontargeted detection methods for analyzing complex food matrices. Improvements in sample preparation and analytical platforms may enhance the relevance of food authenticity, quality, and safety.

Preparation of polypyrrole/nanosilica composite for solid-phase microextraction of bisphenol and phthalates migrated from containers to eye drops and injection solutions

This paper describes the electrodeposition of polyphosphate-doped polypyrrole/nanosilica nanocomposite coating on steel wire for direct solid-phase microextraction of bisphenol A and five phthalates. We optimized influencing parameters on the extraction efficiency and morphology of the nanocomposite such as deposition potential, concentration of pyrrole and polyphosphate, deposition time and the nanosilica amount. Under the optimized conditions, characterization of the nanocomposite was investigated by scanning electron microscopy and Fourier transform infra-red spectroscopy. Also, the factors related to the solid-phase microextraction method including desorption temperature and time, extraction temperature and time, ionic strength and pH were studied in detail. Subsequently, the proposed method was validated by gas chromatography-mass spectrometry by thermal desorption and acceptable figures of merit were obtained. The linearity of the calibration curves was between 0.01 and 50 ng/mL with acceptable correlation coefficients (0.9956-0.9987) and limits of detection were in the range 0.002-0.01 ng/mL. Relative standard deviations in terms of intra-day and inter-day by five replicate analyses from aqueous solutions containing 0.1 ng/mL of target analytes were in the range 3.3%-5.4% and 5%-7.1%, respectively. Fiber-to-fiber reproducibilities were measured for three different fibers prepared in the same conditions and the results were between 7.3% and 9.8%. Also, extraction recoveries at two different concentrations were ≥96%. Finally, the suitability of the proposed method was demonstrated through its application to the analysis of some eye drops and injection solutions.

Double -shelled hollow ZnO/carbon nanocubes as an efficient solid-phase microextraction coating for the extraction of broad-spectrum pollutants

Efficient extraction of pollutants with different chemical properties from environmental samples has attracted great attention in the development of analytical chemistry. However, it is still a challenge to develop an appropriate and sensitive adsorbent for determining broad-spectrum analytes. Herein, zeolitic imidazole framework-8 (ZIF-8)-derived double-shelled hollow zinc oxide/carbon (ZnO/C) nanocubes were reported as a novel coating for solid-phase microextraction (SPME). The nanocubes with a unique structure and composition were obtained by controlled etching of ZIF-8 with tannic acid (TA) followed by pyrolysis. When a ZnO/C nanocube-coated fiber (ZnO/C-F) was used to extract the complex environmental samples containing both nonpolar (benzene compounds (BTEX)) and polar (chlorophenols (CPs)) pollutants, excellent extraction performance was achieved; we obtained low detection limits (0.14-0.56 ng L-1 for BTEX and 1.10-2.84 ng L-1 for CPs), good repeatability (2.2-5.9% for six replicated extractions) and excellent reproducibility (0.61-7.8%, fiber to fiber). The broad-spectrum SPME performance was ascribed to the synergistic effect between the composition and structure of ZnO/C nanocubes. Compositionally, the uniform dispersion of ZnO and carbon framework could provide abundant adsorption active sites, where Zn-OHs bound CPs by hydrogen bonding and carbon absorbed BTEX through π-π stacking interaction and hydrophobic interaction. Structurally, the double-shelled hollow morphology of the nanocubes was favorable for the sensitive extraction. Finally, the established ZnO/C-F-based headspace-SPME method was used for the preconcentration and determination of abundant analytes from real water samples. These findings open the door for the practical use of double-shelled hollow multicompositional inorganic materials.

Hydrophilic Hollow Nanocube-Functionalized Thin Film Nanocomposite Membrane with Enhanced Nanofiltration Performance

The performance of thin film nanocomposite (TFN) membrane is significantly determined by the inherent structure and composition of the incorporated nanofillers. In this work, hydrophilic hollow nanocubes (HHNs) derived from zeolitic imidazolate framework 8 (ZIF-8) were incorporated into the polyamide layer via an interfacial polymerization approach. The HHNs with abundant hydroxyl groups on the surface were obtained by etching solid ZIF-8 using tannic acid. Benefiting from the hydrophilicity, hollow structure, and negative charge of HHNs, the outstanding nanofiltration performance of the composite membrane was achieved. With the assistance of HHNs, the permeance and Na₂SO₄ rejection of the TFN membrane increased up to 19.4 ± 0.6 L/(m²·h·bar) and 95.2 ± 1.4%, corresponding to an improvement of 190% of the permeance and 2.0% of the rejection compared to the pristine thin film composite membrane. Comparatively, the performance of TFN membranes prepared with solid ZIF-8 only shows 116% improvements of the permeance with slightly increased salt rejection. More importantly, the antifouling property of the TFN-4H membrane was also elevated. The flux recovery ratios of the TFN-4H membrane are 93.2 and 84.7% corresponding to humic acid and bovine serum albumin solutions, respectively. The results indicate that the nanofiltration performance of the composite membrane was significantly enhanced with the incorporation of HHNs.