Redox and pH Dual-Responsive Polymeric Micelles with Aggregation-Induced Emission Feature for Cellular Imaging and Chemotherapy

Actively Targeting Redox-Responsive Multifunctional Micelles for Synergistic Chemotherapy of Cancer

Stimuli-responsive polymeric micelles decorated with cancer biomarkers represent an optimal choice for drug delivery applications due to their ability to enhance therapeutic efficacy while mitigating adverse side effects. Accordingly, we synthesized a digoxin-modified novel multifunctional redox-responsive disulfide-linked poly(ethylene glycol-b-poly(lactic-co-glycolic acid) copolymer (Bi(Dig-PEG-PLGA)-S2) for the targeted and controlled release of doxorubicin (DOX) in cancer cells. Within the micellar aggregate, the disulfide bond confers redox responsiveness, while the presence of the digoxin moiety acts as a targeting agent and chemosensitizer for DOX. Upon self-assembly in aqueous solution, Bi(Dig-PEG-PLGA)-S2 formed uniformly distributed spherical micelles with a hydrodynamic diameter (D h ) of 58.36 ± 0.78 nm and a zeta potential of -24.71 ± 1.01 mV. The micelles exhibited desirable serum and colloidal stability with a substantial drug loading capacity (DLC) of 6.26% and an encapsulation efficiency (EE) of 83.23%. In addition, the release of DOX demonstrated the redox-responsive behavior of the micelles, with approximately 89.41 ± 6.09 and 79.64 ± 6.68% of DOX diffusing from DOX@Bi(Dig-PEG-PLGA)-S2 in the presence of 10 mM GSH and 0.1 mM H2O2, respectively, over 96 h. Therefore, in HeLa cell lines, DOX@Bi(Dig-PEG-PLGA)-S2 showed enhanced intracellular accumulation and subsequent apoptotic effects, attributed to the targeting ability and chemosensitization potential of digoxin. Hence, these findings underscore the promising characteristics of Bi(Dig-PEG-PLGA)-S2 as a multifunctional drug delivery vehicle for cancer treatment.

Polymer Nanoparticles for Preferential Delivery of Drugs Only by Exploiting the Slightly Elevated Temperature of Cancer Cells and Real-Time Monitoring of Drug Release

Rapid proliferation and a faster rate of glycolysis in cancer cells often result in an elevated local temperature (40-43 °C) at the tumor site. Nanoparticles prepared from polymers with two lower critical solution temperatures (LCSTs) can be utilized to take advantage of this subtle temperature elevation to deliver anticancer drugs preferably to the cancer cells, thereby enhancing the overall therapeutic efficacy and reducing side effects. In this direction, we synthesized N-vinyl-2-pyrrolidone (NVP) and substituted NVP (sub-NVP: C2-NVP, C4-NVP)-based polymers with precisely controlled LCSTs by varying the ratio of NVP and sub-NVP. The first LCST (LCST1) was kept below 37 °C to promote self-assembly, drug loading, and structural stability in physiological conditions and the second LCST (LCST2) was in the range of 40-43 °C to ensure mild hyperthermia-induced drug release. Additionally, covalent attachment of tetraphenylethylene (TPE, AIEgen) resulted in aggregation-induced emission in thermoresponsive micellar nanoparticles in which TPE acted as a Förster Resonance Energy Transfer (FRET) pair with the loaded anticancer drug doxorubicin (DOX). Tracking of FRET-induced fluorescence recovery of TPE molecules was utilized to confirm the real-time thermoresponsive release of DOX from nanoparticles and eventual localization of TPE in the cytoplasm and DOX in the nucleus. In vitro cellular studies such as cytotoxicity, cellular uptake, and thermoresponsive drug release showed that the DOX-loaded polymeric nanoparticles were nontoxic to normal cells (HEK-293) but significantly more effective in cancer cells (MCF-7) at 40 °C. To our knowledge, this is the first report of preferential delivery of anticancer drugs only by exploiting the slightly elevated temperature of cancer cells.

Ros-responsive nano-platform for lipid-specific fluorescence imaging of atherosclerosis

Fluorescent probes that specifically targeting Lipid droplets (LDs) have shown potential in biological imaging. Albeit, their in vivo applications are limited due to the hydrophobicity, low signal-to-noise ratio (SNR) and LDs-specificity. Thus, we designed a novel probe namely MeOND, and a reactive oxygen species (ROS)-responsive nano-platform to improve in vivo LDs-specific imaging. MeOND exhibits a remarkable twisted intramolecular charge transfer (TICT) effect with a strongly enhanced near-infrared emission in low-polarity lipid environment. Also, MeOND demonstrates satisfactory biocompatibility and superior intracellular LDs imaging capabilities. MeOND encapsulated nano-platform (MeOND@PMM) presented favorable water solubility and biocompatibility. MeOND@PMM remains stable in physiological conditions but quickly degrades in the environment of elevated ROS level. The released MeOND could then light up the intracellular LDs in atherosclerotic plaques. The design of the probe and nano-platform is expected to provide a better tool for the scientific research of LDs and LDs-related diseases.

Dual pH/redox-responsive hyperbranched polymeric nanocarriers with TME-trigger size shrinkage and charge reversible ability for amplified chemotherapy of breast cancer

A novel pH/redox-responsive hyperbranched MeO-PEG-b-(NIPAAm-co-PBAE) nanoparticles (NPs) were designed with size shrinkage and charge-reversible potential for targeted delivery of docetaxel (DTX) to MDA-MB-231 cell lines. In the tumor microenvironment (TME), amine protonation induces charge reversal and disulfide bond cleavage under high TME GSH concentration causing size shrinkage, improved deep tumor penetration, and active targeting of the therapeutic agents. These nano drug delivery systems (NDDSs) significantly promoted cancer cell uptake (~ 100% at 0.5 h), facilitating site-specific delivery and deep tumor penetration. The MTT assay revealed significantly higher cytotoxicity (P value < 0.0001) for DTX-loaded NPs compared to free DTX. Cell cycle analysis revealed G2/M (58.3 ± 2.1%) and S (21.5 ± 1.3%) arrest for DTX-loaded NPs, while free DTX caused G2/M (67.9 ± 1.1%) and sub-G1 (10.3 ± 0.8%) arrest. DTX-loaded NPs induced higher apoptosis (P value < 0.001) in MDA-MB-231 cells (71.5 ± 2.8%) compared to free DTX (42.3 ± 3.1%). Western blotting and RT-PCR assays confirmed significant up-regulation of protein levels and apoptotic genes by DTX-loaded NPs compared to free DTX. In conclusion, TME-responsive charge reversal and size-shrinkable smart NDDSs designed based on low pH, and high glutathione (GSH), offer more effective site-specific delivery of therapeutic agents to tumors.

Degradable Polymer-Based Nanoassemblies for Precise Targeting and Drug Delivery to Breast Cancer Cells without Affecting Normal Healthy Cells

Stimuli-responsive amphiphilic polymers are known to be precursors to forming promising nanoarchitectonics with tunable properties for application in biomedical sciences. Currently, self-immolative polymers are widely recognized as an emerging class of responsive materials with excellent degradability, which is one of the crucial criteria for designing a robust drug delivery vehicle. Here, we design an amphiphilic polyurethane endowed with a redox-responsive self-immolative linker and a pH-responsive tertiary amine on the backbone, which forms entropy-driven nanoscale supramolecular assemblies (average hydrodynamic diameter ∼110 nm) and is programmed to disassemble in a redox environment (GSH) due to the degradation of the polymer in a self-immolative fashion. The nanoassembly shows efficient drug sequestration and release in a controlled manner in response to glutathione (10 mM). The tertiary amine residing on the surface of the nanoassembly becomes protonated in the tumor microenvironment (pH ∼ 6.4-6.8) and generates positively charged nanoassembly (ζ-potential = +36 mV), which enhances the cancer cell-selective cellular uptake. The biological evaluation of the drug-loaded nanoassembly revealed triple-negative breast cancer (MDAMB-231) selective internalization and cell death while shielding normal cells (RBCs or PBMCs) from off-targeting toxicity. We envision that polyurethane with a redox-responsive self-immolative linker might open up new opportunities for a completely degradable polyurethane-based nanocarrier for drug delivery and diagnosis applications.

UV Irradiation-Induced Cyclic-to-Linear Topological Changes of a Light/pH Dual-Sensitive Cyclic Copolymer for Enhanced Drug Delivery

Cyclic polymers with cleavable backbones triggered by either external or internal stimuli can realize simultaneous extracellular stability and intracellular destabilization of cyclic polymer-based nanocarriers but remain seldom reported. To this end, we prepared herein cyclic-ONB-P(OEGMA-st-DMAEMA) (c-ONB-P(OEGMA-st-DMAEMA)) with a light-cleavable junction in the polymer backbone based on oligo (ethylene glycol) monomethyl ether methacrylate (OEGMA) and N,N-dimethylaminoethyl methacrylate (DMAEMA) using a light-cleavable atom transfer radical polymerization (ATRP) initiator containing an o-nitrobenzyl (ONB) ester group. Together with the pH-sensitivity of DMAEMA, c-ONB-P(OEGMA-st-DMAEMA) shows a light-cleavable mainchain and pH-sensitive side chains. Notably, doxorubicin (DOX)-loaded c-ONB-P(OEGMA4-st-DMAEMA38) (C2) micelles mediated an IC50 value of 2.28 μg/mL in Bel-7402 cells, which is 1.7-fold lower than that acquired without UV irradiation. This study thus reported the synthesis of a cyclic copolymer with a UV-cleavable backbone and uncovered the effects of topological modulation on the in vitro controlled release properties of cyclic polymers.

Dual targeting salinomycin-loaded smart nanomicelles for enhanced accumulation and therapeutic outcome in breast cancer

Salinomycin is a polyether compound that exhibits strong anticancer activity and is known as the cancer stem cell inhibitor that reached clinical testing. The rapid elimination of nanoparticles from the bloodstream by the mononuclear phagocyte system (MPS), the liver, and the spleen, accompanied by protein corona (PC) formation, restricts in vivo delivery of nanoparticles in the tumor microenvironment (TME). The DNA aptamer (TA1) that successfully targets the overexpressed CD44 antigen on the surface of breast cancer cells suffers strongly from PC formation in vivo. Thus, cleverly designed targeted strategies that lead to the accumulation of nanoparticles in the tumor become a top priority in the drug delivery field. In this work, dual redox/pH-sensitive poly (β-amino ester) copolymeric micelles modified with CSRLSLPGSSSKpalmSSS peptide and TA1 aptamer, as dual targeting ligands, were synthesized and fully characterized by physico-chemical methods. These biologically transformable stealth NPs were altered into the two ligand-capped (SRL-2 and TA1) NPs for synergistic targeting of the 4T1 breast cancer model after exposure to the TME. The PC formation was reduced sharply in Raw 264.7 cells by increasing the CSRLSLPGSSSKpalmSSS peptide concentration in modified micelles. Surprisingly, in vitro and in vivo biodistribution findings showed that dual targeted micelle accumulation in the TME of 4T1 breast cancer model was significantly higher than that of single modified formulation, along with deep penetration 24 h after intraperitoneal injection. Also, an in vivo treatment study showed remarkable tumor growth inhibition in 4T1 tumor-bearing Balb/c mice, compared to different formulations, with a 10% lower therapeutic dose (TD) of SAL that was confirmed by hematoxylin and eosin staining (H&E) and the TUNEL assay. Overall, in this study, we developed smart transformable NPs in which the body's own engineering systems alter their biological identity, which resulted in a reduction in therapeutic dosage along with a lowered off-target effect.

Phototriggered structures: Latest advances in biomedical applications

Non-invasive control of the drug molecules accessibility is a key issue in improving diagnostic and therapeutic procedures. Some studies have explored the spatiotemporal control by light as a peripheral stimulus. Phototriggered drug delivery systems (PTDDSs) have received interest in the past decade among biological researchers due to their capability the control drug release. To this end, a wide range of phototrigger molecular structures participated in the DDSs to serve additional efficiency and a high-conversion release of active fragments under light irradiation. Up to now, several categories of PTDDSs have been extended to upgrade the performance of controlled delivery of therapeutic agents based on well-known phototrigger molecular structures like o-nitrobenzyl, coumarinyl, anthracenyl, quinolinyl, o-hydroxycinnamate and hydroxyphenacyl, where either of one endows an exclusive feature and distinct mechanistic approach. This review conveys the design, photochemical properties and essential mechanism of the most important phototriggered structures for the release of single and dual (similar or different) active molecules that have the ability to quickly reason of the large variety of dynamic biological phenomena for biomedical applications like photo-regulated drug release, synergistic outcomes, real-time monitoring, and biocompatibility potential.

Controlled Release of Drug-Encapsulated Protein Films with Various Sodium Dodecyl Sulfate Concentrations

Protein-based drug carriers are ideal drug-delivery platforms because of their biocompatibility, biodegradability, and low toxicity. Many types and shapes of protein-based platforms, including nanoparticles, hydrogels, films, and minipellets, have been prepared to deliver drug molecules. In this study, protein films containing the desired amounts of doxorubicin (DOX) as cancer drugs were developed using a simple mixing method. The release ratio and rate of DOXs were dependent on the surfactant concentration. The drug release ratio was controlled within the range of 20-90% depending on the amount of the surfactant used. The protein film surface was analyzed using a microscope before and after drug release, and the relationship between the degree of film swelling and the drug release ratio was discussed. Moreover, the effects of cationic surfactants on the protein film were investigated. Non-toxic conditions of the protein films were confirmed in normal cells, while the toxicity of the drug-encapsulated protein film was confirmed in cancer cells. Remarkably, it was observed that the drug-encapsulated protein film could eliminate 10-70% of cancer cells, with the extent of efficacy varying based on the surfactant amount.

Stimuli-Responsive Polymeric Nanovaccines Toward Next-Generation Immunotherapy

The development of nanovaccines that employ polymeric delivery carriers has garnered substantial interest in therapeutic treatment of cancer and a variety of infectious diseases due to their superior biocompatibility, lower toxicity and reduced immunogenicity. Particularly, stimuli-responsive polymeric nanocarriers show great promise for delivering antigens and adjuvants to targeted immune cells, preventing antigen degradation and clearance, and increasing the uptake of specific antigen-presenting cells, thereby sustaining adaptive immune responses and improving immunotherapy for certain diseases. In this review, the most recent advances in the utilization of stimulus-responsive polymer-based nanovaccines for immunotherapeutic applications are presented. These sophisticated polymeric nanovaccines with diverse functions, aimed at therapeutic administration for disease prevention and immunotherapy, are further classified into several active domains, including pH, temperature, redox, light and ultrasound-sensitive intelligent nanodelivery systems. Finally, the potential strategies for the future design of multifunctional next-generation polymeric nanovaccines by integrating materials science with biological interface are proposed.

ESIPT-, AIE-, and AIE + ESIPT-Based Light-Activated Drug Delivery Systems and Bioactive Donors for Targeted Disease Treatment

Targeted release of bioactive molecules for therapeutic purposes is a key area in the biomedical field that is growing quickly, where bioactive molecules are released passively or actively from drug delivery systems (DDSs) or bioactive donors. In the past decade, researchers have identified light as one of the prime stimuli that can implement the efficient spatiotemporally targeted delivery of drugs or gaseous molecules with minimal cytotoxicity and a real-time monitoring ability. This perspective emphasizes recent advances in the photophysical properties of ESIPT- (excited-state intramolecular proton transfer), AIE- (aggregation-induced emission), and AIE + ESIPT-attributed light-activated delivery systems or donors. The three major sections of this perspective describe the distinctive features of DDSs and donors concerning their design, synthesis, photophysical and photochemical properties, and in vitro and in vivo studies demonstrating their relevance as carrier molecules for releasing cancer drugs and gaseous molecules in the biological system.

Polymeric Micellar Systems-A Special Emphasis on "Smart" Drug Delivery

Concurrent developments in anticancer nanotechnological treatments have been observed as the burden of cancer increases every year. The 21st century has seen a transformation in the study of medicine thanks to the advancement in the field of material science and nanomedicine. Improved drug delivery systems with proven efficacy and fewer side effects have been made possible. Nanoformulations with varied functions are being created using lipids, polymers, and inorganic and peptide-based nanomedicines. Therefore, thorough knowledge of these intelligent nanomedicines is crucial for developing very promising drug delivery systems. Polymeric micelles are often simple to make and have high solubilization characteristics; as a result, they seem to be a promising alternative to other nanosystems. Even though recent studies have provided an overview of polymeric micelles, here we included a discussion on the "intelligent" drug delivery from these systems. We also summarized the state-of-the-art and the most recent developments of polymeric micellar systems with respect to cancer treatments. Additionally, we gave significant attention to the clinical translation potential of polymeric micellar systems in the treatment of various cancers.

Bioderived Lipoic Acid-Based Dynamic Covalent Nanonetworks of Poly(disulfide)s: Enhanced Encapsulation Stability and Cancer Cell-Selective Delivery of Drugs

Dynamic covalent poly(disulfide)-based cross-linked nanoaggregates, termed nanonetworks (NNs), endowed with pH- and redox-responsive degradation features have been fabricated for stable noncovalent encapsulation and triggered cargo release in a controlled fashion. A bioderived lipoic acid-based Gemini surfactant-like amphiphilic molecule was synthesized for the preparation of nanoaggregates. It self-assembles by a entropy-driven self-assembly process in aqueous milieu. To further stabilize the self-assembled nanostructure, the core was cross-linked by ring-opening disulfide exchange polymerization (RODEP) of 1,2-dithiolane rings situated inside the core of the nanoaggregates. The cross-linked nanoaggregates, i.e., nanonetwork, are found to be stable in the presence of blood serum, and also, they maintain the self-assembled structure even below the critical aggregation concentration (CAC) as probed by dynamic light scattering (DLS) experiments. The nanonetwork showed almost 50% reduction in guest leakage compared to that of the nanoaggregates as shown by the release profile in the absence of stimuli, suggesting high encapsulation stability as evidenced by the fluorescence resonance energy transfer (FRET) experiment. The decross-linking of the nanonetwork occurs in response to redox and pH stimuli due to disulfide reduction and β-thioester hydrolysis, respectively, thus empowering disassembly-mediated controlled cargo release up to ∼87% for 55 h of incubation. The biological evaluation of the doxorubicin (DOX)-loaded nanonetwork revealed environment-specific surface charge modulation-mediated cancer cell-selective cellular uptake and cytotoxicity. The benign nature of the nanonetwork toward normal cells makes the system very promising in targeted drug delivery applications. Thus, the ease of synthesis, nanonetwork fabrication reproducibility, robust stability, triggered drug release in a controlled fashion, and cell-selective cytotoxicity behavior, we believe, will make the system a potential candidate in the development of robust materials for chemotherapeutic applications.

Multi Stimuli-Responsive Aggregation-Induced Emission Active Polymer Platform Based on Tetraphenylethylene-Appended Maleic Anhydride Terpolymers

Multi stimuli-responsive aggregation-induced emission (AIE) active polymers have great application prospects in high-tech innovations. Herein, three types of tetraphenylethylene (TPE)-containing monomers were synthesized and utilized in preparing TPE-appended maleic anhydride terpolymers. After hydrolysis, the produced TPE-appended maleic acid terpolymers have identical linear charge densities but different "primary" structures, which created widely varied microenvironments around the carboxylate and TPE groups. Benefiting from the synergistic interaction of the TPE moiety and the terpolymer conformation change, the TPE-appended maleic acid terpolymers exhibited fluorescence changes in response to multi stimuli, including pH, ionic strength, Ca²⁺, and bovine serum albumin. On both the "signaling" and the "stimuli acceptor" sides, the multi stimuli-responsive fluorescence behavior was influenced markedly by the terpolymer primary structure. The fundamental insights gained in the present work are important for developing an efficient and versatile stimuli-responsive AIE-active polymer platform for chemo-sensing, bioimaging, and so on.

Emerging nanobiotechnology for precise theranostics of hepatocellular carcinoma

Primary liver cancer has become the second most fatal cancer in the world, and its five-year survival rate is only 10%. Most patients are in the middle and advanced stages at the time of diagnosis, losing the opportunity for radical treatment. Liver cancer is not sensitive to chemotherapy or radiotherapy. At present, conventional molecularly targeted drugs for liver cancer show some problems, such as short residence time, poor drug enrichment, and drug resistance. Therefore, developing new diagnosis and treatment methods to effectively improve the diagnosis, treatment, and long-term prognosis of liver cancer is urgent. As an emerging discipline, nanobiotechnology, based on safe, stable, and efficient nanomaterials, constructs highly targeted nanocarriers according to the unique characteristics of tumors and further derives a variety of efficient diagnosis and treatment methods based on this transport system, providing a new method for the accurate diagnosis and treatment of liver cancer. This paper aims to summarize the latest progress in this field according to existing research and the latest clinical diagnosis and treatment guidelines in hepatocellular carcinoma (HCC), as well as clarify the role, application limitations, and prospects of research on nanomaterials and the development and application of nanotechnology in the diagnosis and treatment of HCC.

Redox-Responsive Drug Delivery Systems: A Chemical Perspective

With the widespread global impact of cancer on humans and the extensive side effects associated with current cancer treatments, a novel, effective, and safe treatment is needed. Redox-responsive drug delivery systems (DDSs) have emerged as a potential cancer treatment with minimal side effects and enhanced site-specific targeted delivery. This paper explores the physiological and biochemical nature of tumors that allow for redox-responsive drug delivery systems and reviews recent advances in the chemical composition and design of such systems. The five main redox-responsive chemical entities that are the focus of this paper are disulfide bonds, diselenide bonds, succinimide-thioether linkages, tetrasulfide bonds, and platin conjugates. Moreover, as disulfide bonds are the most commonly used entities, the review explored disulfide-containing liposomes, polymeric micelles, and nanogels. While various systems have been devised, further research is needed to advance redox-responsive drug delivery systems for cancer treatment clinical applications.

Stimuli-Responsive Aggregation-Induced Emission (AIE)-Active Polymers for Biomedical Applications

At high concentration or in the aggregated state, most of the traditional luminophores suffer from the general aggregation-caused quenching (ACQ) effect, which significantly limits their biomedical applications. On the contrary, a few fluorophores exhibit an aggregation-induced emission (AIE) feature which is just the opposite of ACQ. The luminophores with aggregation-induced emission (AIEgens) have exhibited noteworthy advantages to get tunable emission, excellent photostability, and biocompatibility. Incorporating AIEgens into polymer design has yielded diversified polymer systems with fascinating photophysical characteristics. Again, stimuli-responsive polymers are capable of undergoing chemical and/or physical property changes on receiving signals from single or multiple stimuli. The combination of the AIE property and stimuli responses in a single polymer platform provides a feasible and effective strategy for the development of smart polymers with promising biomedical applications. Herein, the advancements in stimuli-responsive polymers with AIE characteristics for biomedical applications are summarized. AIE-active polymers are first categorized into conventional π-π conjugated and nonconventional fluorophore systems and then subdivided based on various stimuli, such as pH, redox, enzyme, reactive oxygen species (ROS), and temperature. In each section, the design strategies of the smart polymers and their biomedical applications, including bioimaging, cancer theranostics, gene delivery, and antimicrobial examples, are introduced. The current challenges and future perspectives of this field are also stated at the end of this review article.

Polymeric Carriers for Delivery of RNA Cancer Therapeutics

As research uncovers the underpinnings of cancer biology, new targeted therapies have been developed. Many of these therapies are small molecules, such as kinase inhibitors, that target specific proteins; however, only 1% of the genome encodes for proteins and only a subset of these proteins has ‘druggable’ active binding sites. In recent decades, RNA therapeutics have gained popularity due to their ability to affect targets that small molecules cannot. Additionally, they can be manufactured more rapidly and cost-effectively than small molecules or recombinant proteins. RNA therapeutics can be synthesised chemically and altered quickly, which can enable a more personalised approach to cancer treatment. Even though a wide range of RNA therapeutics are being developed for various indications in the oncology setting, none has reached the clinic to date. One of the main reasons for this is attributed to the lack of safe and effective delivery systems for this type of therapeutic. This review focuses on current strategies to overcome these challenges and enable the clinical utility of these novel therapeutic agents in the cancer clinic.

Aggregation-induced emission (AIE)-Based nanocomposites for intracellular biological process monitoring and photodynamic therapy

As a non-invasive visualization technique, photoluminescence imaging (PLI) has found its huge value in many biological applications associated with intracellular process monitoring and early and accurate diagnosis of diseases. PLI can also be combined with therapeutics to build imaging-guided theragnostic platforms for achieving early and precise treatment of diseases. Photodynamic therapy (PDT) as a quintessential phototheranostics technology has gained great benefits from the combination with PLI. Recently, aggregation-induced emission (AIE)-active materials have emerged as one of the most promising bioimaging and phototheranostic agents. Most of AIEgens, however, need to be chemically engineered to form versatile nanocomposites with improved their photophysical property, photochemical activity, biocompatibility, etc. In this review, we focus on three categories of AIE-active nanocomposites and highlight their application progresses in the intracellular biological process monitoring and PLI-guided PDT. We hope this review can guide further development of AIE-active nanocomposites and promote their practical applications for monitoring intracellular biological processes and imaging-guided PDT.

Oxidation and Reduction Dual-Responsive Polymeric Prodrug Micelles Co-delivery Precisely Prescribed Paclitaxel and Honokiol for Laryngeal Carcinoma Combination Therapy

Laryngeal carcinoma is the most common head and neck malignancy globally, and chemotherapy is still the most common treatment for this type of carcinoma. Monotherapy has become powerless because of the lack of drugs in the anticancer agent library, the difficult process of new drug discovery, and the widespread drug resistance. Combination therapy with two agents, in particular Chinese herbal medicines with chemotherapy drugs, is a potential alternative to chemotherapy alone. However, combination therapy faces difficulties in delivering multiple drugs to tumor tissue in a precise ratio. Here, a cocktail polymeric prodrug micelle (PHPPM) was developed using an oxidation and reduction dual-responsive polymeric paclitaxel (PTX) and polymeric honokiol (HK) prodrugs. Both of them were obtained by covalently conjugating the drug to dextran via diselenium bonds. Following optimization and characterization, the PHPPM with the precise mass ratio of PTX and HK was obtained, enabling ratiometric drug loading, synchronized drug release in response to tumor high-level reactive oxygen species and glutathione environment, long blood circulation, and high tumor accumulation. This co-delivery system can effectively inhibit laryngeal carcinoma growth in vitro and in vivo. Codelivery of chemotherapy agents and Chinese herbal medicine with a precise ratio and controlled release of the two drugs at the tumor site provides an effective approach to clinical therapy for other laryngeal carcinomas.

Single and Multiple Stimuli-Responsive Polymer Particles for Controlled Drug Delivery

Polymers that can change their properties in response to an external or internal stimulus have become an interesting platform for drug delivery systems. Polymeric nanoparticles can be used to decrease the toxicity of drugs, improve the circulation of hydrophobic drugs, and increase a drug’s efficacy. Furthermore, polymers that are sensitive to specific stimuli can be used to achieve controlled release of drugs into specific areas of the body. This review discusses the different stimuli that can be used for controlled drug delivery based on internal and external stimuli. Internal stimuli have been defined as events that evoke changes in different characteristics, inside the body, such as changes in pH, redox potential, and temperature. External stimuli have been defined as the use of an external source such as light and ultrasound to implement such changes. Special attention has been paid to the particular chemical structures that need to be incorporated into polymers to achieve the desired stimuli response. A current trend in this field is the incorporation of several stimuli in a single polymer to achieve higher specificity. Therefore, to access the most recent advances in stimuli-responsive polymers, the focus of this review is to combine several stimuli. The combination of different stimuli is discussed along with the chemical structures that can produce it.

Recent Advances in Aggregation-Induced Emission Active Materials for Sensing of Biologically Important Molecules and Drug Delivery System

The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.

Aggregation-Induced Emission Luminogens with Photoresponsive Behaviors for Biomedical Applications

Fluorescent biomedical materials can visualize subcellular structures and therapy processes in vivo. The aggregation-induced emission (AIE) phenomenon helps suppress the quenching effect in the aggregated state suffered by conventional fluorescent materials, thereby contributing to design strategies for fluorescent biomedical materials. Photoresponsive biomedical materials have attracted attention because of the inherent advantages of light; i.e., remote control, high spatial and temporal resolution, and environmentally friendly characteristics, and their combination with AIE facilitates development of fluorescent molecules with efficient photochemical reactions upon light irradiation. In this review, organic compounds with AIE features for biomedical applications and design strategies for photoresponsive AIE luminogens (AIEgens) are first summarized briefly. Applications are then reviewed, with the employment of photoresponsive and AIE-active molecules for photoactivation imaging, super-resolution imaging, light-induced drug delivery, photodynamic therapy with photochromic behavior, and bacterial targeting and killing being discussed at length. Finally, the future outlook for AIEgens is considered with the aim of stimulating innovative work for further development of this field.

PPy@Fe3O4 Nanoparticles Inhibit Tumor Growth and Metastasis Through Chemodynamic and Photothermal Therapy in Non-small Cell Lung Cancer

Non-small cell lung cancer (NSCLC) is considered to be a principal cause of cancer death across the world, and nanomedicine has provided promising alternatives for the treatment of NSCLC in recent years. Photothermal therapy (PTT) and chemodynamic therapy (CDT) have represented novel therapeutic modalities for cancer treatment with excellent performance. The purpose of this research was to evaluate the effects of PPy@Fe₃O₄ nanoparticles (NPs) on inhibiting growth and metastasis of NSCLC by combination of PTT and CDT. In this study, we synthesized PPy@Fe₃O₄ NPs through a very facile electrostatic absorption method. And we detected reactive oxygen species production, cell apoptosis, migration and protein expression in different groups of A549 cells and established xenograft models to evaluate the effects of PPy@Fe₃O₄ NPs for inhibiting the growth of NSCLC. The results showed that the PPy@Fe₃O₄ NPs had negligible cytotoxicity and could efficiently inhibit the cell growth and metastasis of NSCLC in vitro. In addition, the PPy@Fe₃O₄ NPs decreased tumor volume and growth in vivo and endowed their excellent MRI capability of observing the location and size of tumor. To sum up, our study displayed that the PPy@Fe₃O₄ NPs had significant synergistic effects of PTT and CDT, and had good biocompatibility and safety in vivo and in vitro. The PPy@Fe₃O₄ NPs may be an effective drug platform for the treatment of NSCLC.

AIE active polymers for biological applications

The discovery of aggregation-induced emission (AIE) phenomenon, significantly altered the understanding of the scientific world about the luminophore aggregation. Polymers with AIE features have recently emerged as promising materials with wide range of applications in optoelectronics devices, chemosensors, bioimaging, cancer theranostics and drug delivery. By introducing the AIE active molecule into the polymer structure, novel materials encompassing the characteristics properties of both the functional materials such as excellent brightness, versatile structure modification, high biocompatibility, exceptional stability and facile processability are achieved. This chapter presents the advances in synthetic design as well as potential biological applications of AIE active polymers, beginning with a brief introduction to the AIE phenomenon. The versatile synthetic route, easier functionalization, and light up feature of the AIE active polymers offer direct visualization of the physiological processes within or outside the living organisms. This chapter also precisely describes the photodynamic therapy/photothermal therapy (PDT/PTT) with up-to-date advancement of AIE active polymer and their emerging applications in biomedical field. The AIE active Photosensitizers (PSs) are much more efficient in singlet oxygen (¹O₂) production than their small molecule AIE active PSs due to their enhanced inter system crossing (ISC) process and improved light-harvesting ability. Additionally, the present chapter aims to focus on all recent AIE active polymers for drug screening and drug delivery. The AIE active polymer often shows decent drug loading capacity, high stability and good biocompatibility comprising image guided drug monitoring features. Lastly, the concluding discussion reveals the future prospective of the AIE active polymers.

Recent developments in selenium-containing polymeric micelles: prospective stimuli, drug-release behaviors, and intrinsic anticancer activity

Selenium is capable of forming a dynamic covalent bond with itself and other elements and can undergo metathesis and regeneration reactions under optimum conditions. Its dynamic nature endows selenium-containing polymers with striking sensitivity towards some environmental alterations. In the past decade, several selenium-containing polymers were synthesized and used for the preparation of oxidation-, reduction-, and radiation-responsive nanocarriers. Recently, thioredoxin reductase, sonication, and osmotic pressure triggered the cleavage of Se-Se bonds and swelling or disassembly of nanostructures. Moreover, some selenium-containing nanocarriers form oxidation products such as seleninic acids and acrylates with inherent anticancer activities. Thus, selenium-containing polymers hold promise for the fabrication of ultrasensitive and multifunctional nanocarriers of radiotherapeutic, chemotherapeutic, and immunotherapeutic significance. Herein, we discuss the most recent developments in selenium-containing polymeric micelles in light of their architecture, multiple stimuli-responsive properties, emerging immunomodulatory activities, and future perspectives in the delivery and controlled release of anticancer agents.

Stimuli-Responsive AIEgens

The unique advantages and the exciting application prospects of AIEgens have triggered booming developments in this area in recent years. Among them, stimuli-responsive AIEgens have received particular attention and impressive progress, and they have been demonstrated to show tremendous potential in many fields from physical chemistry to materials science and to biology and medicine. Here, the recent achievements of stimuli-responsive AIEgens in terms of seven most representative types of stimuli including force, light, polarity, temperature, electricity, ion, and pH, are summarized. Based on typical examples, it is illustrated how each type of systems realize the desired stimuli-responsive performance for various applications. The key work principles behind them are ultimately deciphered and figured out to offer new insights and guidelines for the design and engineering of the next-generation stimuli-responsive luminescent materials for more broad applications.

Functional Polymer Systems with Aggregation-Induced Emission and Stimuli Responses

Functional polymer systems with stimuli responses have attracted great attention over the years due to their diverse range of applications. Such polymers are capable of altering their chemical and/or physical properties, such as chemical structures, chain conformation, solubility, shape, morphologies, and optical properties, in response to single or multiple stimuli. Among various stimuli-responsive polymers, those with aggregation-induced emission (AIE) properties possess the advantages of high sensitivity, fast response, large contrast, excellent photostability, and low background noise. The changes in fluorescence signal can be conveniently detected and monitored using portable instruments. The integration of AIE and stimuli responses into one polymer system provides a feasible and effective strategy for the development of smart polymers with high sensitivity to environmental variations. Here, we review the recent advances in the design, preparation, performance, and applications of functional synthetic polymer systems with AIE and stimuli responses. Various AIE-based polymer systems with responsiveness toward single physical or chemical stimuli as well as multiple stimuli are summarized with specific examples. The current challenges and perspectives on the future development of this research area will also be discussed at the end of this review.

Nanomaterials with Supramolecular Assembly Based on AIE Luminogens for Theranostic Applications

One of the major pursuits of biomedical science is to develop advanced strategies for theranostics, which is expected to be an effective approach for achieving the transition from conventional medicine to precision medicine. Supramolecular assembly can serve as a powerful tool in the development of nanotheranostics with accurate imaging of tumors and real-time monitoring of the therapeutic process upon the incorporation of aggregation-induced emission (AIE) ability. AIE luminogens (AIEgens) will not only enable fluorescence imaging but will also aid in improving the efficacy of therapies. Furthermore, the fluorescent signals and therapeutic performance of these nanomaterials can be manipulated precisely owing to the reversible and stimuli-responsive characteristics of the supramolecular systems. Inspired by rapid advances in this field, recent research conducted on nanotheranostics with the AIE effect based on supramolecular assembly is summarized. Here, three representative strategies for supramolecular nanomaterials are presented as follows: a) supramolecular self-assembly of AIEgens, b) the loading of AIEgens within nanocarriers with supramolecular assembly, and c) supramolecular macrocycle-guided assembly via host-guest interactions. Meanwhile, the diverse applications of such nanomaterials in diagnostics and therapeutics have also been discussed in detail. Finally, the challenges of this field are listed in this review.

Synthesis of 'dual-key-and-lock' drug carriers for imaging and improved drug release

In this work, a 'dual-key-and-lock' drug carrier was designed to respond to the tumor microenvironment (TME). A core-shell Fe-MOF@ZIF-8 was synthesized, with ZIF-8 as the shell (the first lock) to encapsulate catalase (CAT), and the Fe metal-organic framework (MOF) as the core (the second lock) to encapsulate the anticancer drug doxorubicin (DOX). Fe-MOF@ZIF-8 takes advantage of the TME-which includes a high concentration of H₂O₂, a weakly acidic environment and hypoxia-to achieve efficient cancer therapy. With the pH response, ZIF-8 and Fe-MOF are degraded in turn to release CAT and DOX, just like 'pH stimulation', as a key to open the two locks in turn. The released CAT reacts with the rich H₂O₂ in the tumor to produce O₂ to regulate hypoxia, thereby improving the anticancer efficiency of the released DOX. The different cytotoxicity to L-02 cells and HeLa cells of Fe-MOF@ZIF-8 shows Fe-MOF@ZIF-8 is only harmful to cancer cells and is not harmful to normal cells. The reason is that the Fe²⁺/Fe³⁺ in Fe-MOF interact with the rich H₂O₂ in cancer cells to generate hydroxyl radicals (ċOH), which is proved by the color of the solution of 3,3',5,5'-tetramethylbenzidine turning blue. After loading of the drug and CAT, Fe-MOF@ZIF-8 can release CAT, DOX and ċOH in response to the TME, thus killing more HeLa cells. Therefore, synthesis of 'dual-key-and-lock' drug carriers responsive to the TME is a promising strategy for cancer treatment.

Graphitic Carbon Nitride Quantum Dots Embedded in Carbon Nanosheets for Near-Infrared Imaging-Guided Combined Photo-Chemotherapy

Rational design of metal-free multifunctional therapeutic reagents offers great opportunities for cancer treatment in the clinic. Here, graphitic carbon nitride (g-C₃N₄) quantum dots embedded in carbon nanosheets (CNQD-CN) are in situ prepared via a one-pot hydrothermal approach with formamide as carbon and nitrogen source. The CNQD-CN not only serves as an excellent near-infrared (NIR) fluorescent marker but also acts as a pH-responsive nanocarrier. Moreover, the CNQD-CN possesses both light-to-heat conversion and singlet oxygen generation capabilities under a single NIR excitation wavelength. Further investigations show that systemic delivery of doxorubicin (DOX) using the multifunctional CNQD-CN nanocarrier under NIR irradiation was highly effective to cause cancer cell apoptosis in vitro and inhibit tumor growth in vivo. CNQD-CN represents a multifunctional therapeutic platform for synchronous cancer imaging and treatment through the synergistic effect of phototherapy and chemotherapy.

PH and redox dual-responsive polymeric micelles with charge conversion for paclitaxel delivery

Here we demonstrate a type of pH and redox dual-responsive micelles, which were self-assembled in aqueous solution by an amphiphilic polymer, methoxypoly(ethylene glycol)-cystamine-poly(L-glutamic acid)-imidazole (mPEG-SS-PGA-IM). Considering tumor cells or tissues exhibiting low pH values and high glutathione (GSH) concentration, mPEG-SS-PGA-IM micelles possessed the charge conversion at pH of tumor tissues, which can facilitate cellular uptake of tumor cells. Furthermore, mPEG-SS-PGA-IM micelles can escape from endo/lysosomes based on the proton sponge effect, following degraded by higher concentration of GSH in cytoplasm. CLSM images of HCT116 cells indicated that mPEG-SS-PGA-IM micelles can escape from endo/lysosomes and enter cytoplasm. MTT assay showed that (paclitaxel) PTX-loaded mPEG-SS-PGA-IM micelles had higher cytotoxicity against HCT116 cells compared with PTX-loaded mPEG-PBLG and mPEG-SS-PBLG micelles. These results indicated that these mPEG-SS-PGA-IM micelles, as novel and effective pH- and redox-responsive nanocarriers, have great potential to both improve drug targeting efficiency while also enhancing the antitumor efficacy of PTX.

A novel cross-linked nanoparticle with aggregation-induced emission properties for cancer cell imaging

Fluorescent probes have been widely used in bioimaging as an efficient and convenient analytical tool. From the initial inorganic nanoparticles and small organic molecules to polymeric nanoparticles, scientific researchers have been trying to develop a probe with strong fluorescence and excellent biocompatibility. In this study, a tetraphenylethylene derivative with AIE properties and hyaluronic acid modified by methacrylic anhydride were combined to prepare a novel nanoparticle (HA-Ac-Pha-C) as a fluorescent probe by a photochemical cross-linking reaction. The fluorescence intensity and size of the nanoparticles were characterized by different techniques. It was confirmed that cross-linked nanoparticles not only showed stronger fluorescence, but also had better photostability while still maintaining 85.9% of the initial intensity after seven days. Moreover, cells and zebrafish imaging experiments also demonstrated that nanoparticles show specific fluorescence labeling for cancer cells and excellent biocompatibility in living organisms.

pH and singlet oxygen dual-responsive GEM prodrug micelles for efficient combination therapy of chemotherapy and photodynamic therapy

Nanocarriers have been an important strategy for enhancing the combination therapy of chemotherapy and photodynamic therapy (PDT) (Chem-PDT).

Hierarchical Responsive Nanoplatform with Two-Photon Aggregation-Induced Emission Imaging for Efficient Cancer Theranostics

Theranostic nanoplatforms haev been proven to be a feasible strategy against cancer for convenient diagnosis, efficient drug release, and reduced side effects. However, the drug leakage during blood circulation, poor cellular uptake of drug-loaded nanoparticles, and insufficient drug release still remain to be overcome. Herein, a hierarchical pH and reactive oxygen species (ROS)-responsive nanoplatform is constructed labeling with a two-photon fluorophore developed by us, aiming for a programmed drug delivery and an intensive two-photon bioimaging. With the capecitabine (Cap) conjugated, the prodrug polymer PMPC-b-P[MPA(Cap)-co-TPMA]-PAEMA (PMMTA_b-Cap) can be self-assembled into the core-shell structured micelles, which can stay stable in the blood stream. Once the micelles accumulate at the tumor tissue, the outside PMPC shell can be desquamated while the inner PAEMA become hydrophilic and electropositive under the acidic extracellular tumor microenvironment, leading to a shrunken micellar size for the better penetration along with enhanced endocytosis. After cellular internalization, the overexpressed intracellular ROS can eventually trigger the drug delivery for an accurate tumor therapy, which is confirmed by the in vivo antitumor experiments. Furthermore, the in vivo micellar biodistribution can be traced by a deep tissue imaging up to 150 μm because of the aggregation-induced emission active two-photon fluorophore. As a theranostic nanoplatform with two-photon bioimaging and hierarchical responsiveness, these PMMTA_b-Cap micelles can be a potential candidate for tumor theranostical applications.

Hyperbranching-Enhanced-Emission Effect Discovered in Hyperbranched Poly(4-(cyanomethyl)phenyl methacrylate)

To disclose the effect of architecture over fluorescence behaviors of polymers, linear and hyperbranched poly(4-(cyanomethyl)phenyl methacrylate)s (PCPMAs) were synthesized by using atom transfer radical polymerization (ATRP). Compared to linear PCPMAs with weakly AIE (AIE: aggregation-induced-emission) characteristics and small-molecule analogues of 4-(cyanomethyl)phenyl isobutyrate (CPB) with ACQ (ACQ: aggregation-caused-quenching) behaviors, hyperbranched PCPMA showed dramatically stronger fluorescence at both solution and solid states and more significant AIE characteristics, which were further enhanced by increasing the branching degree, indicating a significant hyperbranching-enhanced-emission effect (HEE). The HEE effect was attributed to the strong promotion of hyperbranched architecture over the formation of a nitrile group cluster with through-space conjugation (TSC). The HEE effect provided a promising methodology to construct efficient nontraditional fluorescent polymers without large-conjugated, rigid, and planar emitter groups.

AIE-active fluorescent polymeric nanoparticles about dextran derivative: preparation and bioimaging application

Aggregation-induced emission (AIE), as a special phenomenon of fluorescence, can elegantly overcome the fluorescence quenching caused by common fluorescent materials under high concentration conditions and has attracted interest of researchers in many fields. Particularly AIE-active polymer nanoparticles have been widely utilized in a modern biomedical research. In this work, we prepared a novel kind of AIE-active fluorescent polymeric nanoparticals (Dex-OH-CHO) through a facile esterification between a new hydrophobic AIE-active 1, 8-naphthalimide derivative and the hydrophilic dextran. The structure and optical properties of Dex-OH-CHO were characterized in detail by FTIR, ¹H NMR, XPS, TEM and fluorescence spectra. The results showed that Dex-OH-CHO emitted light-blue fluorescence in aqueous solution with high fluorescent quantum yield (Φ = 24.43%, concentration is 20 μg/mL), low CMC (5 μg/mL), good photostability, high water solubility and well dispersivity. Moreover, good biocompatibility and ideal cell uptake made Dex-OH-CHO had a great application potential in biological imaging.