Controlling Pore Shape and Size of Interpenetrated Anion-Pillared Ultramicroporous Materials Enables Molecular Sieving of CO2 Combined with Ultrahigh Uptake Capacity

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Enhancing CO2/N2 and CH4/N2 separation performance by salt-modified aluminum-based metal-organic frameworks

The energy-saving separation of CO2/N2 and CH4/N2 in the energy industry facilitates the reduction of greenhouse gas emissions and replenishes energy resources, but is a challenging separation process. The trade-off between adsorption capacity and selectivity of the adsorbents is one of the key bottlenecks in adsorption separation technologies' large-scale application in the above separation task. Herein, we introduced a series of fluoroborate or fluorosilicate salts (Cu(BF4)2, Zn(BF4)2 and ZnSiF6) into the open coordination nitrogen sites of aluminum-based metal-organic frameworks (MOF-253) to create multiple binding sites to simultaneously enhance the adsorption capacity and selectivity for the target gas. By the synergistic adsorption effect of metal ions (Cu2+ or Zn2+) and fluorinated anions (BF4- or (SiF6)2-), the single-component adsorption capacity and selectivity of salt-modified MOF-253 (MOF-253@Cu(BF4)2, MOF-253@Zn(BF4)2 and MOF-253@ZnSiF6) for CO2 and CH4 were effectively improved when compared to pristine MOF-253 at 298 K and 1 bar. In addition, the salt-modified MOF-253 has a moderate adsorption heat (<30 kJ mol-1) which could be rapidly regenerated at low energy by evacuation desorption. As confirmed by the ambient breakthrough experiments of MOF-253 and MOF-253@ZnSiF6, the real separation performance for both CO2/N2 (1/4) and CH4/N2 (1/4) was obviously improved. This work provides a feasible post-modification strategy on uncoordinated sites of the framework to improve adsorption separation performance and promote the development of ideal adsorbents with a view to realizing their application in the energy industry.

Prediction of the capture and utilization of atmospheric acidic gases by azo-based square-pillared fluorinated MOFs

More than the permissible limit of acidic gases like CO2, SO2, and NO2 in the atmosphere are responsible for the formation of acid rain, the greenhouse effect and many other undesirable environmental hazards. So, the capture and utilization of these gases are essential for mankind. Herein, we proposed an azo-based square pillared MOF, [Ni(MF5)(1,2-bis(4-pyridy)diazene)2]n, with the CUS metal site, i.e. M = Al/Fe, for the selective capture and conversion of acidic gas molecules into commodity chemicals such as cyclic carbonate, sulphite and nitrite. With the aid of Density Functional Theory (DFT), [Ni(MF5)(1,2-bis(4-pyridy)diazene)2]n has been optimized, and the specific force field is derived via guest-host interaction. The Grand Canonical Monte Carlo (GCMC) simulation has been used to explore the guest-host interactions over a wide range of pressures, and their respective stability under pre-humidification is evaluated. The adsorption prediction reveals that MFFIVE-Ni-apy have a higher adsorptive capacity (37.1 mmol g-1), and especially ALFFIVE-Ni-apy possesses a higher affinity towards guest molecules (CO2, SO2) rather than FEFFIVE-Ni-apy. Additionally, the adsorption of gases in the presence of humidity reveals that ALFFIVE-Ni-apy has an optimal adsorption capacity for all investigated acidic gases even at 38.5 RH%. The absorbed acidic gases on MFFIVE-Ni-apy were used for the theoretical investigations on cycloaddition with the aid of DFT as an application perspective of the toxic gases instead of expelling into atmosphere. The Climbing Image Nudged Elastic Band (CI-NEB) approach was used to discover the transition state in this scenario, in which the cycloaddition of adsorbed CO2, SO2, and NO2 gases with epoxides leads to the formation of cyclic carbonates, sulphites, and nitrates, respectively.

Controlled alkali etching of MOFs with secondary building units for low-concentration CO2 capture

Low-concentration CO2 capture is particularly challenging because it requires highly selective adsorbents that can effectively capture CO2 from gas mixtures containing other components such as nitrogen and water vapor. In this study, we have successfully developed a series of controlled alkali-etched MOF-808-X (where X ranges from 0.04 to 0.10), the FT-IR and XPS characterizations revealed the presence of hydroxyl groups (-OH) on the zirconium clusters. Low-concentration CO2 capture experiments demonstrated improved CO2 capture performance of the MOF-808-X series compared to the pristine MOF-808 under dry conditions (400 ppm CO2). Among them, MOF-808-0.07 with abundant Zr-OH sites showed the highest CO2 capture capacity of 0.21 mmol g-1 under dry conditions, which is 70 times higher than that of pristine MOF-808. Additionally, MOF-808-0.07 exhibited fast adsorption kinetics, stable CO2 capture under humid air conditions (with a relative humidity of 30%), and stable regeneration even after 50 cycles of adsorption and desorption. In situ DRIFTS and 13C CP-MAS ssNMR characterizations revealed that the enhanced low-concentration CO2 capture is attributed to the formation of a stable six-membered ring structure through the interaction of intramolecular hydrogen bonds between neighboring Zr-OH sites via a chemisorption mechanism.

Fluorinated metal-organic frameworks for gas separation

Fluorinated metal-organic frameworks (F-MOFs) as fast-growing porous materials have revolutionized the field of gas separation due to their tunable pore apertures, appealing chemical features, and excellent stability. A deep understanding of their structure-performance relationships is critical for the synthesis and development of new F-MOFs. This critical review has focused on several strategies for the precise design and synthesis of new F-MOFs with structures tuned for specific gas separation purposes. First, the basic principles and concepts of F-MOFs as well as their structure, synthesis and modification and their structure to property relationships are studied. Then, applications of F-MOFs in adsorption and membrane gas separation are discussed. A detailed account of the design and capabilities of F-MOFs for the adsorption of various gases and the governing principles is provided. In addition, the exceptional characteristics of highly stable F-MOFs with engineered pore size and tuned structures are put into perspective to fabricate selective membranes for gas separation. Systematic analysis of the position of F-MOFs in gas separation revealed that F-MOFs are benchmark materials in most of the challenging gas separations. The outlook and future directions of the science and engineering of F-MOFs and their challenges are highlighted to tackle the issues of overcoming the trade-off between capacity/permeability and selectivity for a serious move towards industrialization.

The difference in the CO2 adsorption capacities of different functionalized pillar-layered metal-organic frameworks (MOFs)

The excessive use of fossil energy has caused the CO2 concentration in the atmosphere to increase year by year. MOFs are ideal CO2 adsorbents that can be used in CO2 capture due to their excellent characteristics. Studies of the structure-activity relationship between the small structural differences in MOFs and the CO2 adsorption capacities are helpful for the development of efficient MOF-based CO2 adsorbents. Therefore, a series of pillar-layered MOFs with similar structural and different functional groups were designed and synthesized. The CO2 adsorption tests were carried out at 273 K to explore the relationship between the small structural differences in MOFs caused by different functional groups and the CO2 adsorption capacities. Significantly, compound 6 which contains a pyridazinyl group has a 30.9% increase in CO2 adsorption capacity compared to compound 1 with no functionalized group.

Molecular engineering in a family of pillared-layered metal-organic frameworks for tuning gas adsorption behavior

In this work, inspired by a water-assisted three-dimensional supramolecular structure 1, we use a mixed-ligand strategy to form a 3D pillared-layered matrix by the introduction of linear ligands to compete against the water molecules. The resulting analogue microporous MOFs of 2-H, 2-F and 2-N, decorated with different functional groups, similarly show the CO2 uptake. Thanks to the negligible N2 adsorption capacity, enhanced selective adsorption towards CO2 is achieved in compound 2-N. That is, we present here an alternative plan for the high CO2 selective adsorption performance. In addition, the structure stability and moderate affinity for CO2 of these microporous MOFs endow them with excellent reusability.

Advances in Post-Combustion CO2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

The atmospheric CO₂ concentration continues a rapid increase to its current record high value of 416 ppm for the time being. It calls for advanced CO₂ capture technologies. One of the attractive technologies is physical adsorption-based separation, which shows easy regeneration and high cycle stability, and thus reduced energy penalties and cost. The extensive research on this topic is evidenced by the growing body of scientific and technical literature. The progress spans from the innovation of novel porous adsorbents to practical separation practices. Major CO₂ capture materials include the most widely used industrially relevant porous carbons, zeolites, activated alumina, mesoporous silica, and the newly emerging metal-organic frameworks (MOFs) and covalent-organic framework (COFs). The key intrinsic properties such as pore structure, surface chemistry, preferable adsorption sites, and other structural features that would affect CO₂ capture capacity, selectivity, and recyclability are first discussed. The industrial relevant variables such as particle size of adsorbents, the mechanical strength, adsorption heat management, and other technological advances are equally important, even more crucial when scaling up from bench and pilot-scale to demonstration and commercial scale. Therefore, we aim to bring a full picture of the adsorption-based CO₂ separation technologies, from adsorbent design, intrinsic property evaluation to performance assessment not only under ideal equilibrium conditions but also in realistic pressure swing adsorption processes.

Precise Pore Space Partitions Combined with High-Density Hydrogen-Bonding Acceptors within Metal-Organic Frameworks for Highly Efficient Acetylene Storage and Separation

The high storage capacity versus high selectivity trade-off barrier presents a daunting challenge to practical application as an acetylene (C₂ H₂ ) adsorbent. A structure-performance relationship screening for sixty-two high-performance metal-organic framework adsorbents reveals that a moderate pore size distribution around 5.0-7.5 Å is critical to fulfill this task. A precise pore space partition approach was involved to partition 1D hexagonal channels of typical MIL-88 architecture into finite segments with pore sizes varying from 4.5 Å (SNNU-26) to 6.4 Å (SNNU-27), 7.1 Å (SNNU-28), and 8.1 Å (SNNU-29). Coupled with bare tetrazole N sites (6 or 12 bare N sites within one cage) as high-density H-bonding acceptors for C₂ H₂ , the target MOFs offer a good combination of high C₂ H₂ /CO₂ adsorption selectivity and high C₂ H₂ uptake capacity in addition to good stability. The optimized SNNU-27-Fe material demonstrates a C₂ H₂ uptake of 182.4 cm³  g^-1 and an extraordinary C₂ H₂ /CO₂ dynamic breakthrough time up to 91 min g^-1 under ambient conditions.

Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework

Efficient and sustainable methods for carbon dioxide capture are highly sought after. Mature technologies involve chemical reactions that absorb CO2, but they have many drawbacks. Energy-efficient alternatives may be realised by porous physisorbents with void spaces that are complementary in size and electrostatic potential to molecular CO2. Here, we present a robust, recyclable and inexpensive adsorbent termed MUF-16. This metal-organic framework captures CO2 with a high affinity in its one-dimensional channels, as determined by adsorption isotherms, X-ray crystallography and density-functional theory calculations. Its low affinity for other competing gases delivers high selectivity for the adsorption of CO2 over methane, acetylene, ethylene, ethane, propylene and propane. For equimolar mixtures of CO2/CH4 and CO2/C2H2, the selectivity is 6690 and 510, respectively. Breakthrough gas separations under dynamic conditions benefit from short time lags in the elution of the weakly-adsorbed component to deliver high-purity hydrocarbon products, including pure methane and acetylene.

Thermal decomposition of hybrid ultramicroporous materials (HUMs)

Hybrid Ultramicroporous Materials (HUMs) are porous coordination materials with exemplary gas sorption and separation characteristics, but relatively poor thermal stability when compared to other porous coordination polymers or metal-organic frameworks (MOFs). The origin of this poor thermal stability has not yet been experimentally verified. Therefore, we investigate the thermal decomposition mechanisms of representative HUMs with the general formulae [M(SiF₆)(L)₂] or [M(SiF₆)(L)(H₂O)₂], where M = Ni(ii), Cu(ii) or Zn(ii) and L = pyrazine or 4,4'-bipyridine. We find that two decomposition mechanisms dominate: (i) the fragmentation of the XF₆^2- pillar into gaseous XF₄ and fluoride, and (ii) direct sublimation of the N-donor ligand. The former process dictates the overall thermal stability of the material. We also demonstrate that HF is a possible decomposition product from certain hydrated HUM materials.

Isoreticular Microporous Metal-Organic Frameworks for Carbon Dioxide Capture

The isoreticular principle has been applied to construct two copper metal-organic framework (MOF) analogues with different porosities for the adsorptive capture of CO₂ from N₂ and CH₄ at 1 atm and 298 K. By using a 4-substituted isophthalate linker with a bulky nitro group, the microporous MOF [Cu(BDC-NO₂)(DMF)] (UTSA-93 or CuBDC-NO₂; H₂BDC-NO₂ = 4-nitroisophthalic acid and DMF = N,N'-dimethylformamide) has been synthesized with mot topology, showing a compact pore structure with a size of 6.0 × 7.0 Ų in contrast to that of 6.9 × 8.5 Ų in the prototypical MOF with a bromo group. The optimized pore structure allows the nitro-functionalized MOF to capture CO₂ with a higher capacity of about 2.40 mmol g^-1 under ambient conditions, in contrast to 1.08 mmol g^-1 in the bromo-functionalized analogue. The adsorption selectivity of CuBDC-NO₂-a for a CO₂/N₂ (15:85) mixture (28) under ambient conditions is also higher than that of the bromo-substituted prototype (25) and comparable with those of several MOF materials. Moreover, dynamic breakthrough experiments of the nitro-functionalized MOF have been performed to illustrate its separation potential toward a CO₂/N₂ mixture.

Acid-Base-Resistant Metal-Organic Framework for Size-Selective Carbon Dioxide Capture

The development of practical porous materials for the selective capture of CO₂ from flue gas and crude biogas is highly critical for both environment protection and energy safety. Here, a novel metal-organic framework (FJI-H29) has been prepared, which not only has excellent acid-base resistance but also possesses polar micropores (3.4-4.3 Å) that can match CO₂ molecules well. FJI-H29 can selectively capture CO₂ from N₂ and CH₄ with excellent separation efficiency and suitable adsorption enthalpy under ambient conditions. Breakthrough experiments further confirm its practicability for both CO₂/N₂ and CO₂/CH₄ separation. All of these confirm FJI-H29 is a practical CO₂ adsorbent. Modeling calculations reveal that the confinement effect of micropores and the polar environment synergistically promotes the selective adsorption of CO₂, which will provide a potential strategy for the synthesis of a practical metal-organic framework for CO₂ capture.

Coupling Structural and Adsorption Properties of Metal-Organic Frameworks: From Pore Size Distribution to Pore Type Distribution

Metal-organic frameworks (MOFs) attract a rapidly growing attention across the disciplines due to their multifarious pore structures and unique ability to selectively adsorb, store, and release various guest molecules. Pore structure characterization and coupling of adsorption and structural properties are imperative for rational design of advanced MOF materials and their applications. The pore structure of MOFs represents a three-dimensional network comprised of several types of pore compartments: interconnected cages and channels distinguished by their size, shape, and chemistry. Here, we propose a novel methodology for pore structure characterization of MOF materials based on matching of the experimental adsorption isotherms to in silico-generated fingerprint isotherms of adsorption in individual pore compartments of the ideal crystal. The proposed approach couples structural and adsorption properties, determines the contributions of different types of pores into the total adsorption, and estimates to what extent the pore structure of the sample under investigation is different from the ideal crystal. The MOF pore structure is characterized by the pore type distribution (PTD), which is more informative than the traditional pore size distribution that is based on oversimplistic pore models. The method is illustrated on the example of Ar adsorption at 87 K on hydrated and dehydrated structures of Cu-BTC, one of the most well-known MOF materials. The PTD determined from the experimental isotherm provides an estimate of the crystal fraction in the sample and the accessibility and degree of hydration of different types of pore compartments. In addition, the PTD determined from the experimental adsorption isotherm is used to predict the isosteric heat of adsorption that provides important information on the specifics of adsorption interactions. The results are found to be in excellent agreement with experimental data. Such detailed information about the pore structure and adsorption properties of practical MOF samples cannot be obtained with currently available methods of adsorption characterization.

Solvent-dependent supramolecular self-assembly of boron cage pillared metal–organic frameworks for selective gas separation

A family of microporous boron cage pillared supramolecular metal–organic frameworks are synthesized with the self-assembly behavior controlled by solvents. Interpenetrated BSF-4 is potential for highly selective C₂H₂/C₂H₄ and C₂H₂/CO₂ separation.

Open metal site (OMS) and Lewis basic site (LBS)-functionalized copper–organic framework with high CO2 uptake performance and highly selective CO2/N2 and CO2/CH4 separation

A robust porous metal–organic framework with dual functionalities of open metal sites (OMSs) and O-rich Lewis basic sites (LBSs) has been designed and synthesized, and shows high CO₂ uptake and excellent selectivity for CO₂ over N₂ and CH₄.

Mechano-assisted synthesis of an ultramicroporous metal–organic framework for trace CO2 capture

Hybrid ultramicroporous ZU-36-Ni (GeFSIX-3-Ni) synthesized by a mechano-assisted thermal transformation method exhibits excellent trace CO₂ capture performance through strong host–guest interactions.

Trends in Solid Adsorbent Materials Development for CO2 Capture

A recent report from the United Nations has warned about the excessive CO₂ emissions and the necessity of making efforts to keep the increase in global temperature below 2 °C. Current CO₂ capture technologies are inadequate for reaching that goal, and effective mitigation strategies must be pursued. In this work, we summarize trends in materials development for CO₂ adsorption with focus on recent studies. We put adsorbent materials into four main groups: (I) carbon-based materials, (II) silica/alumina/zeolites, (III) porous crystalline solids, and (IV) metal oxides. Trends in computational investigations along with experimental findings are covered to find promising candidates in light of practical challenges imposed by process economics.

A Microporous Metal-Organic Framework Supramolecularly Assembled from a CuII Dodecaborate Cluster Complex for Selective Gas Separation

A novel 3D metal-organic framework BSF-1 based on the closo-dodecaborate cluster [B₁₂ H₁₂ ]^2- was readily prepared at room temperature by supramolecular assembly of CuB₁₂ H₁₂ and 1,2-bis(4-pyridyl)acetylene. The permanent microporous structure was studied by X-ray crystallography, powder X-ray diffraction, IR spectroscopy, thermogravimetric analysis, and gas sorption. The experimental and theoretical study of the gas sorption behavior of BSF-1 for N₂ , C₂ H₂ , C₂ H₄ , CO₂ , C₃ H₈ , C₂ H₆ , and CH₄ indicated excellent separation selectivities for C₃ H₈ /CH₄ , C₂ H₆ /CH₄ , and C₂ H₂ /CH₄ as well as moderately high separation selectivities for C₂ H₂ /C₂ H₄ , C₂ H₂ /CO₂ , and CO₂ /CH₄ . Moreover, the practical separation performance of C₃ H₈ /CH₄ and C₂ H₆ /CH₄ was confirmed by dynamic breakthrough experiments. The good cyclability and high water/thermal stability render it suitable for real industrial applications.

Specific K+ Binding Sites as CO2 Traps in a Porous MOF for Enhanced CO2 Selective Sorption

Metal-organic frameworks (MOFs) can be fine-tuned to boost sorbent-sorbate interactions in order to improve gas sorption and separation performance, but the design of MOFs with ideal structural features for gas separation applications remains a challenge. Herein it is reported that unsaturated alkali metal sites can be immobilized in MOFs through a tetrazole based motif and that gas affinity can thereby be boosted. In the prototypal MOF of this type-NKU-521 (NKU denotes Nankai University), K⁺ cations are effectively embedded in a trinuclear Co²⁺ -tetrazole coordination motif. The embedded K⁺ sites are exposed to the pores of NKU-521 through water removal, and the isosteric heat (Q_st ) for CO₂ is boosted to 41 kJ mol^-1 . The nature of the binding site is validated by molecular simulations and structural characterization. The K⁺ cations in effect serve as gas traps and boost the CO₂ -framework affinity, as measured by the Q_st , by 24%. In addition, the impact of unsaturated alkali metal sites upon the separation of hydrocarbons is evaluated for the first time in MOFs using ideal adsorbed solution theory (IAST) calculations and column breakthrough experiments. The results reveal that the presence of exposed K⁺ sites benefits gas sorption and hydrocarbon separation performances of this MOF.

Two interpenetrated metal–organic frameworks with a slim ethynyl-based ligand: designed for selective gas adsorption and structural tuning

Structural tuning and selective gas adsorption of two interpenetrated metal–organic frameworks using a slim ethynyl-based ligand were achieved.