Mussel-Inspired Electro-Cross-Linking of Enzymes for the Development of Biosensors

Removal of organic micropollutants from water by adsorption on thermo-plasma expanded graphite encapsulated into calcium alginate

Nowadays, public concern is focused on the degradation of water quality. For this reason, the development of innovative technologies for water treatment in view of (micro)pollutant removal is important. Indeed, organic (micro)pollutants, such as pharmaceuticals, herbicides, pesticides and plasticizers at concentration levels of μg L-1 or even ng L-1 are hardly removed during conventional wastewater treatment. In view of this, thermo-plasma expanded graphite, a light-weight innovative material in the form of a powder, was encapsulated into calcium alginate to obtain a granular form useful as filtration and adsorption material for removal of different pollutants. The produced material was used to remove atrazine, bisphenol-A, 17-α-ethinylestradiol and carbamazepine (at concentration levels of 125, 250 and 500 µg L-1) by top-down filtration. The effect of flow rate, bed depth and adsorbent composition was evaluated based on breakthrough curves. The experimental data was analysed with the Adams-Bohart model in view of scale-up. Under optimal conditions, removal and adsorption capacity of respectively about 21%, 21%, 38%,42%, 43 µg g-1, 44 µg g-1, 37 µg g-1 and 87 µg g-1 were obtained for atrazine, bisphenol, 17-α ethinylestradiol and carbamazepine when using 0.12 g of thermo-plasma expanded graphite to treat 200 mL at 500 µg L-1 (for each compound) of solution obtaining at contact time of 20 min. The granular form of TPEG obtained (GTPEG) by entrapping in calcium alginate results to have a good adsorbent property for the removal of carbamazepine, atrazine, bisphenol A and 17-α ethinylestradiol from water at concentration levels between 250 and 500 μg L-1. Promising results confirm the adsorbent properties of TPEG and push-up us to investigate on its application and improve of its performance by evaluating different entrapping materials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40201-023-00876-9.

A π-π Bonding-Assisted Molecular-Wiring of Folded-Cytochrome c and Naphthoquinone and Its Electron-Relay-Based Bioelectrocatalytic H2O2 Reduction Reaction Visualized by Redox-Competitive Scanning Electrochemical Microscopy

The electron-transfer (ET) reaction of cytochrome c (Cytc) protein with biomolecules is a cutting-edge research area of interest in understanding the functionalities of natural systems. Several electrochemical biomimicking studies based on Cytc-protein-modified electrodes prepared via electrostatic interaction and covalent bonding approaches have been reported. Indeed, natural enzymes involve multiple types of bonding, such as hydrogen, ionic, covalent, and π-π, etc. In this work, we explore a Cytc-protein chemically modified glassy carbon electrode (GCE/CB@NQ/Cytc) prepared via π-π bonding using graphitic carbon as an underlying surface and an aromatic organic molecule, naphthoquinone (NQ), as a cofactor for an effective ET reaction. A simple drop-casting technique-based preparation of GCE/CB@NQ showed a distinct surface-confined redox peak at a standard electrode potential (E°) = -0.2 V vs Ag/AgCl (surface excess = 21.3 nmol cm-2) in pH 7 phosphate buffer solution. A control experiment of modification of NQ on an unmodified GCE failed to show any such unique feature. For the preparation of GCE/CB@NQ/Cytc, a dilute solution of Cytc-pH 7 phosphate buffer was drop-cast on the GCE/CB@NQ surface, wherein the protein folding and denaturalization-based complication and its associated ET functionalities were avoided. Molecular dynamics simulation studies show the complexation of NQ with Cytc at the protein binding sites. The protein-bound surface shows an efficient and selective bioelectrocatalytic reduction performance of H2O2, as demonstrated using cyclic voltammetry and amperometric i-t techniques. Finally, the redox-competition scanning electrochemical microscopy (RC-SECM) technique was adopted for in situ visualization of the electroactive adsorbed surface. The RC-SECM images clearly show the regions of highly bioelectrocatalytic active sites of Cytc-proteins bound to NQ molecules on a graphitic carbon surface. The binding of Cytc with NQ has significant implications for studying the biological electron transport mechanism, and the proposed method provides the requisite framework for such a study.

Electrochemical Assembly Strategies of Polymer and Hybrid Thin Films for (Bio)sensors, Charge Storage, and Triggered Release

In the context of functional and hierarchical materials, electrode reactions coupled with one or more chemical reactions constitute the most powerful bottom-up process for the electrosynthesis of film components and their electrodeposition, enabling the localized functionalization of conductive surfaces using an electrical stimulus. In analogy with developmental biological processes, our group introduced the concept of morphogen-driven film buildup. In this approach, the gradient of a diffusing reactive molecule or ion (called a morphogen) is controlled by an electrical stimulus to locally induce a chemical process (solubility change, hydrolysis, complexation, and covalent reaction) that induces a film assembly. One of the prominent advantages of this technique is the conformal nature of the deposits toward the electrode. This Feature Article presents the contributions made by our group and other researchers to develop strategies for the assembly of different polymer and nanoparticle/polymer hybrid films by using electrochemically generated reagents and/or catalysts. The main electrochemical-chemical approaches for conformal films are described in the case where (i) the products are noncovalent aggregates that spontaneously precipitate on the electrode (film electrodeposition) or (ii) new chemical compounds are generated, which do not necessarily spontaneously precipitate and enable the formation of covalent or noncovalent films (film electrosynthesis). The applications of those electrogenerated films will be described with a focus on charge storage/transport, (bio)sensing, and stimuli-responsive cargo delivery systems.

Electro-Biofabrication. Coupling Electrochemical and Biomolecular Methods to Create Functional Bio-Based Hydrogels

Twenty years ago, this journal published a review entitled "Biofabrication with Chitosan" based on the observations that (i) chitosan could be electrodeposited using low voltage electrical inputs (typically less than 5 V) and (ii) the enzyme tyrosinase could be used to graft proteins (via accessible tyrosine residues) to chitosan. Here, we provide a progress report on the coupling of electronic inputs with advanced biological methods for the fabrication of biopolymer-based hydrogel films. In many cases, the initial observations of chitosan's electrodeposition have been extended and generalized: mechanisms have been established for the electrodeposition of various other biological polymers (proteins and polysaccharides), and electrodeposition has been shown to allow the precise control of the hydrogel's emergent microstructure. In addition, the use of biotechnological methods to confer function has been extended from tyrosinase conjugation to the use of protein engineering to create genetically fused assembly tags (short sequences of accessible amino acid residues) that facilitate the attachment of function-conferring proteins to electrodeposited films using alternative enzymes (e.g., transglutaminase), metal chelation, and electrochemically induced oxidative mechanisms. Over these 20 years, the contributions from numerous groups have also identified exciting opportunities. First, electrochemistry provides unique capabilities to impose chemical and electrical cues that can induce assembly while controlling the emergent microstructure. Second, it is clear that the detailed mechanisms of biopolymer self-assembly (i.e., chitosan gel formation) are far more complex than anticipated, and this provides a rich opportunity both for fundamental inquiry and for the creation of high performance and sustainable material systems. Third, the mild conditions used for electrodeposition allow cells to be co-deposited for the fabrication of living materials. Finally, the applications have been expanded from biosensing and lab-on-a-chip systems to bioelectronic and medical materials. We suggest that electro-biofabrication is poised to emerge as an enabling additive manufacturing method especially suited for life science applications and to bridge communication between our biological and technological worlds.

Ultrasensitive visual detection of the food-borne pathogen via MOF encapsulated enzyme

Various methods have been made to achieve sensitive detection (10 CFU/mL) of Escherichia coli O157:H7 (E. coli) in real samples, however, they are complex, time-consuming, or instrument-dependent. Enzyme-catalyzed reactions are one of the most efficient methods to amplify signals for sensitive detection. ZIF-8 owning stability, porosity, and high specific area are suitable for embedding enzymes which can effectively protect enzyme activity and thus improve detection sensitivity. Herein, a simple visual assay of E. coli with the limits of detection of 1 CFU/mL was developed based on this stable enzyme-catalyzed amplified system. A microbial safety test of milk, orange juice, seawater, cosmetic, and hydrolyzed yeast protein, was successfully performed with the limits of detection of 10 CFU/mL by the naked eye. And this bioassay possessed high selectivity and stability making the developed detection method practically promising.

Recent Advances in the Development and Characterization of Electrochemical and Electrical Biosensors for Small Molecule Neurotransmitters

Neurotransmitters act as chemical messengers, determining human physiological and psychological function, and abnormal levels of neurotransmitters are related to conditions such as Parkinson's and Alzheimer's disease. Biologically and clinically relevant concentrations of neurotransmitters are usually very low (nM), so electrochemical and electronic sensors for neurotransmitter detection play an important role in achieving sensitive and selective detection. Additionally, these sensors have the distinct advantage to potentially be wireless, miniaturized, and multichannel, providing remarkable opportunities for implantable, long-term sensing capabilities unachievable by spectroscopic or chromatographic detection methods. In this article, we will focus on advances in the development and characterization of electrochemical and electronic sensors for neurotransmitters during the last five years, identifying how the field is progressing as well as critical knowledge gaps for sensor researchers.

Optimization of Nanohybrid Biosensors Based on Electro-Crosslinked Tannic Acid Capped Nanoparticles/Enzyme

Enzymes/Nanoparticles (NPs) bioconjugates are massively used nowadays to develop thin films for optical and electrochemical biosensors. Nevertheless, their full characterization as a thin coating onto electrodes remains little discussed, in particular the influence of NPs size and enzyme/NPs ratio used in the electrodeposition solution. In this study, GOx (160 kDa) and HRP (44 kDa) were used in association with tannic acid capped gold NPs (a series with sizes from 7 to 40 nm) to electrodeposit biosensor coatings, sensitive towards glucose and H2O2, respectively. The electrodeposition process was based on a mussel-inspired electro-crosslinking between gallol moieties of tannic acid (at the surface of NPs) and amine moieties of the enzymes. On one hand, the sensitivity of the GOx/NPs coatings depends strongly on the NP size and the enzyme/NPs molar ratio of the electrodeposition solution. An optimal sensitivity was obtained by electrodeposition of 11 nm NPs at a GOx/NPs molar ratio close to the theoretical value of the enzyme monolayer. On the other hand, a modest influence of the NPs size was found on the sensitivity in the case of the electrodeposited HRP/NPs coatings, reaching a plateau at the HRP/NPs molar ratio close to the value of the theoretical enzyme monolayer. In both cases, the enzyme/NPs molar ratio played a role in the sensitivity. To fully understand the parameters driving the biosensor sensitivity, a comprehensive evaluation of the colloidal state of the bioconjugates is proposed here.

Methods of Encapsulation of Biomacromolecules and Living Cells. Prospects of Using Metal–Organic Frameworks

The review discusses different methods of encapsulation and biomineralization of macromolecules and living cells. Main advantages and disadvantages of most commonly used carriers, matrices, and materials for immobilization of proteins, enzymes, nucleic acids, and living cells are briefly surveyed. Examples of delivery vehicles for multifunctional encapsulation of protein-like substances are presented. Particular attention is paid to prospects of using metal–organic frameworks in medicine and biotechnology.

Redox Is a Global Biodevice Information Processing Modality

Biology is well-known for its ability to communicate through (i) molecularly-specific signaling modalities and (ii) a globally-acting electrical modality associated with ion flow across biological membranes. Emerging research suggests that biology uses a third type of communication modality associated with a flow of electrons through reduction/oxidation (redox) reactions. This redox signaling modality appears to act globally and has features of both molecular and electrical modalities: since free electrons do not exist in aqueous solution, the electrons must flow through molecular intermediates that can be switched between two states - with electrons (reduced) or without electrons (oxidized). Importantly, this global redox modality is easily accessible through its electrical features using convenient electrochemical instrumentation. In this review, we explain this redox modality, describe our electrochemical measurements, and provide four examples demonstrating that redox enables communication between biology and electronics. The first two examples illustrate how redox probing can acquire biologically relevant information. The last two examples illustrate how redox inputs can transduce biologically-relevant transitions for patterning and the induction of a synbio transceiver for two-hop molecular communication. In summary, we believe redox provides a unique ability to bridge bio-device communication because simple electrochemical methods enable global access to biologically meaningful information. Further, we envision that redox may facilitate the application of information theory to the biological sciences.

Electrobiofabrication: electrically based fabrication with biologically derived materials

While conventional material fabrication methods focus on form and strength to achieve function, the fabrication of material systems for emerging life science applications will need to satisfy a more subtle set of requirements. A common goal for biofabrication is to recapitulate complex biological contexts (e.g. tissue) for applications that range from animal-on-a-chip to regenerative medicine. In these cases, the material systems will need to: (i) present appropriate surface functionalities over a hierarchy of length scales (e.g. molecular features that enable cell adhesion and topographical features that guide differentiation); (ii) provide a suite of mechanobiological cues that promote the emergence of native-like tissue form and function; and (iii) organize structure to control cellular ingress and molecular transport, to enable the development of an interconnected cellular community that is engaged in cell signaling. And these requirements are not likely to be static but will vary over time and space, which will require capabilities of the material systems to dynamically respond, adapt, heal and reconfigure. Here, we review recent advances in the use of electrically based fabrication methods to build material systems from biological macromolecules (e.g. chitosan, alginate, collagen and silk). Electrical signals are especially convenient for fabrication because they can be controllably imposed to promote the electrophoresis, alignment, self-assembly and functionalization of macromolecules to generate hierarchically organized material systems. Importantly, this electrically based fabrication with biologically derived materials (i.e. electrobiofabrication) is complementary to existing methods (photolithographic and printing), and enables access to the biotechnology toolbox (e.g. enzymatic-assembly and protein engineering, and gene expression) to offer exquisite control of structure and function. We envision that electrobiofabrication will emerge as an important platform technology for organizing soft matter into dynamic material systems that mimic biology's complexity of structure and versatility of function.

Improved Electrical Wiring of Glucose Oxidase Enzyme with an in-Situ Immobilized Mn(1,10-Phenanthroline)2Cl2-Complex/Multiwalled Carbon Nanotube-Modified Electrode Displaying Superior Performance to Os-Complex for High-Current Sensitivity Bioelectrocatalytic and Biofuel Cell Applications

The search for a new and efficient transducer that can electrically connect enzyme active sites, like flavin adenine dinucleotide in glucose oxidase (GOx), with the electrode surface is a cutting-edge research area. Currently, Os(bpy)-complex pendent polyvinylpyridine/polyvinyl imidazole/pyridinium hydrogel based chemically modified electrodes have been widely used for this purpose (bpy = 2,2'-bipyridine). Herein, we report, a [Mn₂^III(phen)₄(O)(Cl)₂]²⁺ complex/Nafion-immobilized carboxylic acid-functionalized multiwalled carbon nanotube modified glassy carbon electrode (GCE/f-MWCNT@Mn₂(Phen)₄O(Cl)₂-Nf, phen = 1,10-phenanthroline), prepared by an in-situ electrochemical method using the precursor, Mn(phen)₂Cl₂, as an efficient and low cost alternate to the Os-complex transducer, for the glucose oxidase enzyme (GOx) based bio-electro-catalytic system. The existence of the key active site, [Mn₂^III(phen)₄(O)(Cl)₂]²⁺, on the modified electrode was confirmed by physicochemical characterizations using transmission electron microscope, Raman, infrared, and UV-vis spectroscopes and electrospray ionization mass spectrometry techniques. The Mn-complex modified electrode showed a redox peak at E°' = 0.55 V vs Ag/AgCl in neutral solution with a surface excess (Γ_Mn) value of 5.6 × 10^-9 mol cm^-2. The GOx enzyme bioanode prepared by adsorbing GOx on the Mn-complex modified electrode has shown an efficient bioelectrocatalytic oxidation of glucose with a Tafel slope value of 111 mV dec^-1. Amperometric i-t analysis of glucose showed a calibration plot in a linear range of 50-550 μM and with current sensitivity of 316.7 μA mM^-1 cm^-2. The current sensitivity value obtained here is about 2-80 000 times higher than that of the Os(bpy)-complex based transducers used for GOx based bio-electro-catalytic applications. Utilizing this new bioanode system along with a Pt-based oxygen reduction electrode, a new biofuel cell was constructed and achieved a power density value 7.5 μW cm^-2.