Bioinspired Photocatalytic Shark-Skin Surfaces with Antibacterial and Antifouling Activity via Nanoimprint Lithography

Micropattern Fabricated by Acropetal Migration Controlled through Sequential Photo and Thermal Polymerization

Bottom-up patterning technology plays a significant role in both nature and synthetic materials, owing to its inherent advantages such as ease of implementation, spontaneity, and noncontact attributes, etc. However, constrained by the uncontrollability of molecular movement, energy interaction, and stress, obtained micropatterns tend to exhibit an inevitable arched outline, resulting in the limitation of applicability. Herein, inspired by auxin's action mode in apical dominance, a versatile strategy is proposed for fabricating precision self-organizing micropatterns with impressive height based on polymerization-induced acropetal migration. The copolymer containing fluorocarbon chains (low surface energy) and tertiary amine (coinitiator) is designed to self-assemble on the surface of the photo-curing system. The selective exposure under a photomask establishes a photocuring boundary and the radicals would be generated on the surface, which is pivotal in generating a vertical concentration difference of monomer. Subsequent heating treatment activates the material continuously transfers from the unexposed area to the exposed area and is accompanied by the obviously vertical upward mass transfer, resulting in the manufacture of a rectilinear profile micropattern. This strategy significantly broadens the applicability of self-organizing patterns, offering the potential to mitigate the complexity and time-consuming limitations associated with top-down methods.

Bacterial Surface Appendages Modulate the Antimicrobial Activity Induced by Nanoflake Surfaces on Titanium

Bioinspired nanotopography is a promising approach to generate antimicrobial surfaces to combat implant-associated infection. Despite efforts to develop bactericidal 1D structures, the antibacterial capacity of 2D structures and their mechanism of action remains uncertain. Here, hydrothermal synthesis is utilized to generate two 2D nanoflake surfaces on titanium (Ti) substrates and investigate the physiological effects of nanoflakes on bacteria. The nanoflakes impair the attachment and growth of Escherichia coli and trigger the accumulation of intracellular reactive oxygen species (ROS), potentially contributing to the killing of adherent bacteria. E. coli surface appendages type-1 fimbriae and flagella are not implicated in the nanoflake-mediated modulation of bacterial attachment but do influence the bactericidal effects of nanoflakes. An E. coli ΔfimA mutant lacking type-1 fimbriae is more susceptible to the bactericidal effects of nanoflakes than the parent strain, while E. coli cells lacking flagella (ΔfliC) are more resistant. The results suggest that type-1 fimbriae confer a cushioning effect that protects bacteria upon initial contact with the nanoflake surface, while flagella-mediated motility can lead to elevated membrane abrasion. This finding offers a better understanding of the antibacterial properties of nanoflake structures that can be applied to the design of antimicrobial surfaces for future medical applications.

The use of biomimetic surfaces to reduce single- and dual-species biofilms of Escherichia coli and Pseudomonas putida

The ability of bacteria to adhere to and form biofilms on food contact surfaces poses serious challenges, as these may lead to the cross-contamination of food products. Biomimetic topographic surface modifications have been explored to enhance the antifouling performance of materials. In this study, the topography of two plant leaves, Brassica oleracea var. botrytis (cauliflower, CF) and Brassica oleracea capitate (white cabbage, WC), was replicated through wax moulding, and their antibiofilm potential was tested against single- and dual-species biofilms of Escherichia coli and Pseudomonas putida. Biomimetic surfaces exhibited higher roughness values (SaWC = 4.0 ± 1.0 μm and SaCF = 3.3 ± 1.0 μm) than the flat control (SaF = 0.6 ± 0.2 μm), whilst the CF surface demonstrated a lower interfacial free energy (ΔGiwi) than the WC surface (-100.08 mJ m-2 and -71.98 mJ m-2, respectively). The CF and WC surfaces had similar antibiofilm effects against single-species biofilms, achieving cell reductions of approximately 50% and 60% for E. coli and P. putida, respectively, compared to the control. Additionally, the biomimetic surfaces led to reductions of up to 60% in biovolume, 45% in thickness, and 60% in the surface coverage of single-species biofilms. For dual-species biofilms, only the E. coli strain growing on the WC surface exhibited a significant decrease in the cell count. However, confocal microscopy analysis revealed a 60% reduction in the total biovolume and surface coverage of mixed biofilms developed on both biomimetic surfaces. Furthermore, dual-species biofilms were mainly composed of P. putida, which reduced E. coli growth. Altogether, these results demonstrate that the surface properties of CF and WC biomimetic surfaces have the potential for reducing biofilm formation.

Antifouling applications and fabrications of biomimetic micro-structured surfaces: A review

BACKGROUND

Since the inception of the term "Biomimetics" in 1991, the concept of utilizing natural solutions or deriving inspiration from nature to address contemporary engineering challenges has gained significant attention within the scientific community. Organisms, in order to thrive in harsh environments, have evolved a wide range of micro/nanostructured surfaces, which serve as a rich source of inspiration for the development of artificial micro/nano-structured surfaces. These natural adaptations provide valuable insights and novel pathways for fabricating such surfaces.

AIM

To conclude recent advances in micro/nano-structured surfaces from four aspects: biomimetic micro-structured surfaces of plants and animals, properties and applications of biomimetic surfaces, methods of preparations, and their limitation.

KEY SCIENTIFIC CONCEPTS

Artificial micro/nano-structured surfaces inspired by animals and plants are classified and demonstrated according to their living environment. The performances, principles and preparation techniques of natural superhydrophobic surfaces, slippery liquid-infused porous surfaces (SLIPS), anisotropic surfaces, etc. are described in detail. Moreover, the pros and cons of each preparation measures are compared and the challenges developing large-scale, cost-effective surface microstructure preparation processes are pointed out. In the end, the development trends of artificial micro/nano-structured surface are forecasted.

In Situ Reduction of Silver Nanoparticles/Urushiol-Based Polybenzoxazine Composite Coatings with Enhanced Antimicrobial and Antifouling Performances

Marine anti-fouling coatings represent an efficient approach to prevent and control the marine biofouling. However, a significant amount of antifouling agent is added to improve the static antifouling performance of the coatings, which leads to an issue whereby static antifouling performance conflicts with eco-friendly traits. Herein, this work reports an in situ reduction synthesis of silver nanoparticles (AgNPs) within polymers to produce composite coatings, aiming to solve the aforementioned issue. Firstly, urushiol-based benzoxazine monomers were synthesized by the Mannich reaction, using an eco-friendly natural product urushiol and n-octylamine and paraformaldehyde as the reactants. Additionally, AgNPs were obtained through the employment of free radicals formed by phenolic hydroxyl groups in the urushiol-based benzoxazine monomers, achieved by the in situ reduction of silver nitrate in benzoxazine. Then, the urushiol-based benzoxazine/AgNPs composite coatings were prepared by the thermosetting method. AgNPs exhibit broad-spectrum and highly efficient antimicrobial properties, with a low risk to human health and a minimal environmental impact. The composite coating containing a small amount of AgNPs (≤1 wt%) exhibits effective inhibition against various types of bacteria and marine microalgae in static immersion, thereby displaying outstanding antifouling properties. This organic polymer and inorganic nanoparticle composite marine antifouling coating, with its simple preparation method and eco-friendliness, presents an effective solution to the conflict between static antifouling effectiveness and environmental sustainability in marine antifouling coatings.

A Perspective of Bioinspired Interfaces Applied in Renewable Energy Storage and Conversion Devices

The natural world renders a large number of opportunities to design intriguing structures and fascinating functions for innovations of advanced surfaces and interfaces. Currently, bioinspired interfaces have attracted much attention in practical applications of renewable energy storage and conversion devices including rechargeable batteries, fuel cells, dye-sensitized solar cells, and supercapacitors. By mimicking miscellaneous natural creatures, many novel bioinspired interfaces with various components, structures, morphology, and configurations are exerted on the devices' electrodes, electrolytes, additives, separators, and catalyst matrixes, resorting to their wonderful mechanical, optical, electrical, physical, chemical, and electrochemical features compared with the corresponding traditional modes. In this Perspective, the principles of designing bioinspired interfaces are discussed with respect to biomimetic chemical components, physical morphologies, biochemical reactions, and macrobiomimetic assembly configurations. A brief summary, subsequently, is mainly focused on the recent progress on bioinspired interfaces applied in key materials for rechargeable batteries. Ultimately, a critical comment is projected on significant opportunities and challenges existing in the future development course of bioinspired interfaces. It is expected that this Perspective is able to provide a profound perception into some underlying artificial intelligent energy storage and conversion device design as a promising candidate to resolve the global energy crisis and environmental pollution.

Tannic Acid-Based Coatings Containing Zwitterionic Copolymers for Improved Antifouling and Antibacterial Properties

The prevention of biofilm formation on medical devices has become highly challenging in recent years due to its resistance to bactericidal agents and antibiotics, ultimately resulting in chronic infections to medical devices. Therefore, developing inexpensive, biocompatible, and covalently bonded coatings to combat biofilm formation is in high demand. Herein, we report a coating fabricated from tannic acid (TA) as an adhesive and a reducing agent to graft the zwitterionic polymer covalently in a one-step method. Subsequently, silver nanoparticles (AgNPs) are generated in situ to develop a coating with antifouling and antibacterial properties. To enhance the antifouling property and biocompatibility of the coating, the bioinspired zwitterionic 2-methacryloyloxyethyl phosphorylcholine (MPC) was copolymerized with 2-aminoethyl methacrylamide hydrochloride (AEMA) using conventional free-radical polymerization. AEMA moieties containing amino groups were used to facilitate the conjugation of the copolymer with quinone groups on TA through the Michael addition reaction. Three copolymers with different ratios of monomers were synthesized to understand their impacts on fouling resistance: PMPC100, p(MPC80-st-AEMA20), and p(MPC90-st-AEMA10). To impart antibacterial properties to the surface, AgNPs were formed in situ, utilizing the unreacted quinone groups on TA, which can reduce the silver ions. The successful coating of TA and copolymer onto the surfaces was confirmed by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and its excellent wettability was verified by the water contact angle (CA). Furthermore, the functionalized coatings showed antibacterial properties against E. coli and S. aureus and remarkably decreased the adhesion of the BSA protein. The surfaces can also prevent the adhesion of bacteria cells, as confirmed by the inhibition zone test. In addition, they showed negligible cytotoxicity to normal human lung fibroblast cells (MRC-5). The as-prepared coatings are potentially valuable for biomedical applications.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Preferential adhesion of bacterial cells onto top- and bottom-mounted nanostructured surfaces under flow conditions

The bactericidal effect of biomimetic nanostructured surfaces has been known for a long time, with recent data suggesting an enhanced efficiency of the nanostructured surfaces under fluid shear. While some of the influential factors on the bactericidal effect of nanostructured surfaces under fluid shear are understood, there are numerous important factors yet to be studied, which is essential for the successful implementation of this technology in industrial applications. Among those influential factors, the orientation of the nanostructured surface can play an important role in bacterial cell adhesion onto surfaces. Gravitational effects can become dominant under low flow velocities, making the diffusive transport of bacterial cells more prominent than the advective transport. However, the role of nanostructure orientation in determining its bactericidal efficiency under flow conditions is still not clear. In this study, we analysed the effect of surface orientation of nanostructured surfaces, along with bacterial cell concentration, fluid flow rate, and the duration of time which the surface is exposed to flow, on bacterial adhesion and viability on these surfaces. Two surface orientations, with one on the top and the other on the bottom of a flow channel, were studied. Under flow conditions, the bactericidal efficacy of the nanostructured surface is both orientation and bacterial species dependent. The effects of cell concentration, fluid flow rate, and exposure time on cell adhesion are independent of the nanostructured surface orientation. Fluid shear showed a species-dependent effect on bacterial adhesion, while the effects of concentration and exposure time on bacterial cell adhesion are independent of the bacterial species. Moreover, bacterial cells demonstrate preferential adhesion onto surfaces based on the surface orientation, and these effects are species dependent. These results outline the capabilities and limitations of nanostructures under flow conditions. This provides valuable insights into the applications of nanostructures in medical or industrial sectors, which are associated with overlaying fluid flow.

Replicated biopolymer pattern on PLLA-Ag basis with an excellent antibacterial response

The design of functional micro or nanostructured surfaces is undergoing extensive research for their intriguing multifunctional properties and for large variety of potential applications in biomedical field (tissue engineering or cell adhesion), electronics, optics or microfluidics. Such nanosized topographies can be easily fabricated by various lithography techniques and can be also further reinforced by synergic effect by combining aforementioned structures along materials with already outstanding antibacterial properties. In this work we fabricated novel micro/nanostructured substrates using soft lithography replication method and subsequent thermal nanoimprint lithography method, creating nanostructured films based on poly (l-lactic acid) (PLLA) fortified by thin silver films deposited by PVD. Main nanoscale patterns were fabricated by replicating surface patterns of optical discs (CDs and DVDs), which proved to be easy, fast and inexpensive method for creating relatively large area patterned surfaces. Their antimicrobial activity was examined in vitro against the bacteria Escherichia coli and Staphylococcus epidermidis strains. The results demonstrated that nanopatterned films actually improved the conditions for bacterial growth compared to pristine PLLA films, the novelty is based on formation of Ag nanoparticles on the surface/and in bulk, while silver nanoparticle enhanced and nanopatterned films exhibited excellent antibacterial activity against both bacterial strains, with circa 80 % efficacy in 4 h and complete bactericidal effect in span of 24 h.

Wearable sensors for monitoring marine environments and their inhabitants

Human societies depend on marine ecosystems, but their degradation continues. Toward mitigating this decline, new and more effective ways to precisely measure the status and condition of marine environments are needed alongside existing rebuilding strategies. Here, we provide an overview of how sensors and wearable technology developed for humans could be adapted to improve marine monitoring. We describe barriers that have slowed the transition of this technology from land to sea, update on the developments in sensors to advance ocean observation and advocate for more widespread use of wearables on marine organisms in the wild and in aquaculture. We propose that large-scale use of wearables could facilitate the concept of an 'internet of marine life' that might contribute to a more robust and effective observation system for the oceans and commercial aquaculture operations. These observations may aid in rationalizing strategies toward conservation and restoration of marine communities and habitats.

Bioinspired bi-phasic 3D nanoflowers of MgO/Mg(OH)2 coated melamine sponge as a novel bactericidal agent

By roughly mimicking the surface architectural design of dragonfly wings, novel bi-phasic 3D nanoflowers of MgO/Mg(OH)2 were successfully synthesized via the electrospinning technique. The 3D nanoflowers were coated over a commercial melamine sponge and extensively characterized by SEM, XRD, FTIR, and EDS. The formation of distinct dense 3D nano petals was revealed by SEM images whereby the mean petal thickness and mean distance between the adjacent petals were found to be 36 nm and 121 nm, respectively. The bactericidal activities of synthesized 3D nano-flowers coated melamine sponges were assessed against five different bacteria (Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, and Pseudomonas aeruginosa). This study demonstrated significant bactericidal activity of MgO/Mg(OH)2 3D nanoflowers coated MS against Gram-positive and Gram-negative bacteria. Plausible bactericidal mechanisms include envelope deformation, penetration, and induction of oxidative stress. This study introduces novel bioinspired biomaterial with the capacity to reduce the risk associated with pathogenic bacterial infections, especially in medical devices.

Nanoparticle Imprint Lithography: From Nanoscale Metrology to Printable Metallic Grids

Large scale and low-cost nanopatterning of materials is of tremendous interest for optoelectronic devices. Nanoimprint lithography has emerged in recent years as a nanofabrication strategy that is high-throughput and has a resolution comparable to that of electron-beam lithography (EBL). It is enabled by pattern replication of an EBL master into polydimethylsiloxane (PDMS), that is then used to pattern a resist for further processing, or a sol-gel that could be calcinated into a solid material. Although the sol-gel chemistry offers a wide spectrum of material compositions, metals are still difficult to achieve. This gap could be bridged by using colloidal nanoparticles as resist, but deep understanding of the key parameters is still lacking. Here, we use supported metallic nanocubes as a model resist to gain fundamental insights into nanoparticle imprinting. We uncover the major role played by the surfactant layer trapped between nanocubes and substrate, and measure its thickness with subnanometer resolution by using gap plasmon spectroscopy as a metrology platform. This enables us to quantify the van der Waals (VDW) interactions responsible for the friction opposing the nanocube motion, and we find that these are almost in quantitative agreement with the Stokes drag acting on the nanocubes during nanoimprint, that is estimated with a simplified fluid mechanics model. These results reveal that a minimum thickness of surfactant is required, acting as a spacer layer mitigating van der Waals forces between nanocubes and the substrate. In the light of these findings we propose a general method for resist preparation to achieve optimal nanoparticle mobility and show the assembly of printable Ag and Au nanocube grids, that could enable the fabrication of low-cost transparent electrodes of high material quality upon nanocube epitaxy.

A Review of Smart Superwetting Surfaces Based on Shape-Memory Micro/Nanostructures

Bioinspired smart superwetting surfaces with special wettability have aroused great attention from fundamental research to technological applications including self-cleaning, oil-water separation, anti-icing/corrosion/fogging, drag reduction, cell engineering, liquid manipulation, and so on. However, most of the reported smart superwetting surfaces switch their wettability by reversibly changing surface chemistry rather than surface microstructure. Compared with surface chemistry, the regulation of surface microstructure is more difficult and can bring novel functions to the surfaces. As a kind of stimulus-responsive material, shape-memory polymer (SMP) has become an excellent candidate for preparing smart superwetting surfaces owing to its unique shape transformation property. This review systematically summarizes the recent progress of smart superwetting SMP surfaces including fabrication methods, smart superwetting phenomena, and related application fields. The smart superwettabilities, such as superhydrophobicity/superomniphobicity with tunable adhesion, reversible switching between superhydrophobicity and superhydrophilicity, switchable isotropic/anisotropic wetting, slippery surface with tunable wettability, and underwater superaerophobicity/superoleophobicity with tunable adhesion, can be obtained on SMP micro/nanostructures by regulating the surface morphology. Finally, the challenges and future prospects of smart superwetting SMP surfaces are discussed.

A Bifunctional Spray Coating Reduces Contamination on Surfaces by Repelling and Killing Pathogens

Surface-mediated transmission of pathogens is a major concern with regard to the spread of infectious diseases. Current pathogen prevention methods on surfaces rely on the use of biocides, which aggravate the emergence of antimicrobial resistance and pose harmful health effects. In response, a bifunctional and substrate-independent spray coating is presented herein. The bifunctional coating relies on wrinkled polydimethylsiloxane microparticles, decorated with biocidal gold nanoparticles to induce a "repel and kill" effect against pathogens. Pathogen repellency is provided by the structural hierarchy of the microparticles and their surface chemistry, whereas the kill mechanism is achieved using functionalized gold nanoparticles embedded on the microparticles. Bacterial tests with methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa reveal a 99.9% reduction in bacterial load on spray-coated surfaces, while antiviral tests with Phi6─a bacterial virus often used as a surrogate to SARS-CoV-2─demonstrate a 98% reduction in virus load on coated surfaces. The newly developed spray coating is versatile, easily applicable to various surfaces, and effective against various pathogens, making it suitable for reducing surface contamination in frequently touched, heavy traffic, and high-risk surfaces.

In situ generation of H2O2 using CaO2 as peroxide storage depot for haloperoxidase mimicry with surface-tailored Bi-doped mesoporous CeO2 nanozymes

Designing the size, morphology and interfacial charge of catalyst particles at the nanometer scale can enhance their performance. We demonstrate this with nanoceria which is a functional mimic of haloperoxidases, a group of enzymes that halogenates organic substrates in the presence of hydrogen peroxide. These reactions in aqueous solution require the presence of H₂O₂. We demonstrate in situ generation of H₂O₂ from a CaO₂ reservoir in polyether sulfone (PES) and poly(vinylidene fluoride) (PVDF) polymer beads, which circumvents the external addition of H₂O₂ and expands the scope of applications for haloperoxidase reactions. The catalytic activity of nanoceria was enhanced significantly by Bi³⁺ substitution. Bi-doped mesoporous ceria nanoparticles with tunable surface properties were prepared by changing the reaction time. Increasing reaction time increases the surface area S_BET of the mesoporous Bi_0.2Ce_0.8O_1.9 nanoparticles and the Ce³⁺/Ce⁴⁺ ratio, which is associated with the ζ-potential. In this way, the catalytic activity of nanoceria could be tuned in a straightforward manner. H₂O₂ required for the reaction was released steadily over a long period of time from a CaO₂ storage depot incorporated in polyether sulfone (PES) and poly(vinylidene fluoride) (PVDF) beads together with Bi_0.2Ce_0.8O_1.9 particles, which may be used as precision fillers and templates for biological applications. The spheres are prepared as a dry powder with no surface functionalization or coatings. They are inert, chemically stable, and safe for handling. The feasibility of this approach was demonstrated using a haloperoxidase assay.

Multistage Gradient Bioinspired Riblets for Synergistic Drag Reduction and Efficient Antifouling

Shark skin-inspired riblets have represented the tremendous potential for drag reduction (DR) and antifouling in submarine, ship, and so on. Most studies simplified the complex denticle embedded in the shark skin into the single-stage riblet with uniform parameters, ignoring the influence of riblet height gradient and material deformation on DR and antifouling. In the present study, flexible multistage gradient riblets (MSGRs) with varied heights were proposed, and their DR and antifouling effects were investigated by the experiment and numerical simulation. The experimental results showed that the maximum DR rate of flexible MSGRs with an elastic modulus of 4.592 MPa could reach 16.8% at a flow velocity of 0.5 m/s. Moreover, the dynamic adhesion measurement indicated a reduction by 69.6% of the adhesion area of Chlorella vulgaris on the flexible MSGR surface. The results identified that flexible MSGRs with low surface energy could generate steady high- and low-velocity streaks and alter the flow state of the fluid, thus lessening the average velocity gradient near the wall and the adhering selectivity of pollutants in riblet and achieving synergistic DR and efficient antifouling. Taken together, the proposed flexible MSGR surface holds promise for reducing surface friction and inhibiting particle attachment in engineering applications.

Innovative Antibacterial, Photocatalytic, Titanium Dioxide Microstructured Surfaces Based on Bacterial Adhesion Enhancement

Bacterial colonization and biofilm formation are found on nearly all wet surfaces, representing a serious problem for both human healthcare and industrial applications, where traditional treatments may not be effective. Herein, we describe a synergistic approach for improving the performance of antibacterial surfaces based on microstructured surfaces that embed titanium dioxide nanoparticles (TiO₂ NPs). The surfaces were designed to enhance bacteria entrapment, facilitating their subsequent eradication by a combination of UVC disinfection and TiO₂ NPs photocatalysis. The efficacy of the engineered TiO₂-modified microtopographic surfaces was evaluated using three different designs, and it was found that S2-lozenge and S3-square patterns had a higher concentration of trapped bacteria, with increases of 70 and 76%, respectively, compared to flat surfaces. Importantly, these surfaces showed a significant reduction (99%) of viable bacteria after just 30 min of irradiation with UVC 254 nm light at low intensity, being sixfold more effective than flat surfaces. Overall, our results showed that the synergistic effect of combining microstructured capturing surfaces with the chemical functionality of TiO₂ NPs paves the way for developing innovative and efficient antibacterial surfaces with numerous potential applications in the healthcare and biotechnology market.

Silk-Based Biomaterials for Designing Bioinspired Microarchitecture for Various Biomedical Applications

Biomaterial research has led to revolutionary healthcare advances. Natural biological macromolecules can impact high-performance, multipurpose materials. This has prompted the quest for affordable healthcare solutions, with a focus on renewable biomaterials with a wide variety of applications and ecologically friendly techniques. Imitating their chemical compositions and hierarchical structures, bioinspired based materials have elevated rapidly over the past few decades. Bio-inspired strategies entail extracting fundamental components and reassembling them into programmable biomaterials. This method may improve its processability and modifiability, allowing it to meet the biological application criteria. Silk is a desirable biosourced raw material due to its high mechanical properties, flexibility, bioactive component sequestration, controlled biodegradability, remarkable biocompatibility, and inexpensiveness. Silk regulates temporo-spatial, biochemical and biophysical reactions. Extracellular biophysical factors regulate cellular destiny dynamically. This review examines the bioinspired structural and functional properties of silk material based scaffolds. We explored silk types, chemical composition, architecture, mechanical properties, topography, and 3D geometry to unlock the body's innate regenerative potential, keeping in mind the novel biophysical properties of silk in film, fiber, and other potential forms, coupled with facile chemical changes, and its ability to match functional requirements for specific tissues.

Influence of Sharklet-Inspired Micropatterned Polymers on Spatio-Temporal Variations of Marine Biofouling

This article aims to show the influence of surface characteristics (microtopography, chemistry, mechanical properties) and seawater parameters on the settlement of marine micro- and macroorganisms. Polymers with nine microtopographies, three distinct mechanical properties, and wetting characteristics are immersed for one month into two contrasting coastal sites (Toulon and Kristineberg Center) and seasons (Winter and Summer). Influence of microtopography and chemistry on wetting is assessed through static contact angle and captive air bubble measurements over 3-weeks immersion in artificial seawater. Microscopic analysis, quantitative flow cytometry, metabarcoding based on the ribulose biphosphate carboxylase (rbcL) gene amplification, and sequencing are performed to characterize the settled microorganisms. Quantification of macrofoulers is done by evaluating the surface coverage and the type of organism. It is found that for long static in situ immersion, mechanical properties and non-evolutive wettability have no major influence on both abundance and diversity of biofouling assemblages, regardless of the type of organisms. The apparent contradiction with previous results, based on model organisms, may be due to the huge diversity of marine environments, both in terms of taxa and their size. Evolutive wetting properties with wetting switching back and forth over time have shown to strongly reduce the colonization by macrofoulers.

Robust Underwater Oil-Repellent Biomimetic Ceramic Surfaces: Combining the Stability and Reproducibility of Functional Structures

Robust underwater oil-repellent materials combining high mechanical strength and durability with superwettability and low oil adhesion are needed to build oil-repellent devices able to work in water, to manipulate droplet behavior, etc. However, combining all of these properties within a single, durable material remains a challenge. Herein, we fabricate a robust underwater oil-resistant material (Al₂O₃) with all of the above properties by gel casting. The micro/nanoceramic particles distributed on the surface endow the material with excellent underwater superoleophobicity (∼160°) and low oil adhesion (<4 μN). In addition, the substrate exhibits typical ceramic characteristics such as good antiacid/alkali properties, high salt resistance, and high load tolerance. These excellent properties make the material not only applicable to various liquid environments but also resistant to the impact of particles and other physical damage. More importantly, the substrate could still exhibit underwater superoleophobicity after being worn under specific conditions, as wear will create new surfaces with similar particle size distribution. This approach is easily scalable for mass production, which could open a pathway for the fabrication of practical underwater long-lasting functional interfacial materials.

Recent Developments in Multifunctional Antimicrobial Surfaces and Applications toward Advanced Nitric Oxide-Based Biomaterials

Implant-associated infections arising from biofilm development are known to have detrimental effects with compromised quality of life for the patients, implying a progressing issue in healthcare. It has been a struggle for more than 50 years for the biomaterials field to achieve long-term success of medical implants by discouraging bacterial and protein adhesion without adversely affecting the surrounding tissue and cell functions. However, the rate of infections associated with medical devices is continuously escalating because of the intricate nature of bacterial biofilms, antibiotic resistance, and the lack of ability of monofunctional antibacterial materials to prevent the colonization of bacteria on the device surface. For this reason, many current strategies are focused on the development of novel antibacterial surfaces with dual antimicrobial functionality. These surfaces are based on the combination of two components into one system that can eradicate attached bacteria (antibiotics, peptides, nitric oxide, ammonium salts, light, etc.) and also resist or release adhesion of bacteria (hydrophilic polymers, zwitterionic, antiadhesive, topography, bioinspired surfaces, etc.). This review aims to outline the progress made in the field of biomedical engineering and biomaterials for the development of multifunctional antibacterial biomedical devices. Additionally, principles for material design and fabrication are highlighted using characteristic examples, with a special focus on combinational nitric oxide-releasing biomedical interfaces. A brief perspective on future research directions for engineering of dual-function antibacterial surfaces is also presented.

Self-Patterned Nanoscale Topography of Thin Copolymer Films Prepared by Evaporative Assembly-Resist Early-Stage Bacterial Adhesion

Biofilm formation on the surfaces of indwelling medical devices has become a growing health threat due to the development of antimicrobial resistance to infection-causing bacteria. For example, ventilator-associated pneumonia caused by Pseudomonas and Staphylococci species has become a significant concern in treatment of patients during COVID-19 pandemic. Nanostructured surfaces with antifouling activity are of interest as a promising strategy to prevent bacterial adhesion without triggering drug resistance. In this study, we report a facile evaporative approach to prepare block copolymer film coatings with nanoscale topography that resist bacterial adhesion. The initial attachment of the target bacterium Pseudomonas aeruginosa PAO1 to copolymer films as well as homopolymer films was evaluated by fluorescence microscopy. Significant reduction in bacterial adhesion (93-99% less) and area coverage (>92% less) on the copolymer films was observed compared with that on the control and homopolymer films [poly(methacrylic acid) (PMAA)─only 40 and 23% less, respectively]. The surfaces of poly(styrene)-PMAA copolymer films with patterned nanoscale topography that contains sharp peaks ranging from 20 to 80 nm spaced at 30-50 nm were confirmed by atomic force microscopy and the corresponding surface morphology analysis. Investigation of the surface wettability and surface potential of polymer films assists in understanding the effect of surface properties on the bacterial attachment. Comparison of bacterial growth studies in polymer solutions with the growth studies on coatings highlights the importance of physical nanostructure in resisting bacterial adhesion, as opposed to chemical characteristics of the copolymers. Such self-patterned antifouling surface coatings, produced with a straightforward and energy-efficient approach, could provide a convenient and effective method to resist bacterial fouling on the surface of medical devices and reduce device-associated infections.

Antimicrobial polymeric biomaterials based on synthetic, nanotechnology, and biotechnological approaches

Antimicrobial resistance is the main threat to biomaterial failure with a huge impact on National Health Systems and patients' quality of life. Materials engineering and biotechnology have experienced great advances and have converged in the development of new and more sophisticated biomimetic systems with antimicrobial properties. In this sense, polymeric biomaterials play and will play a key role in the development of new antimicrobial devices for biomedical applications. In this Current Opinion article, we review recent and relevant advances reported in the field of polymeric biomaterials with antimicrobial properties with the potential to be applied in the clinic, that is, antimicrobial polymers, antifouling surfaces, nanodelivery systems of antibiotics and antiseptic drugs, biocide polymer-metal hybrid systems, and engineered living materials that actively interact with the pathogen. We conclude with a discussion on the implications of the results for clinical practice and future research.

Recent Progress on Bioinspired Antibacterial Surfaces for Biomedical Application

Surface bacterial fouling has become an urgent global challenge that calls for resilient solutions. Despite the effectiveness in combating bacterial invasion, antibiotics are susceptible to causing microbial antibiotic resistance that threatens human health and compromises the medication efficacy. In nature, many organisms have evolved a myriad of surfaces with specific physicochemical properties to combat bacteria in diverse environments, providing important inspirations for implementing bioinspired approaches. This review highlights representative natural antibacterial surfaces and discusses their corresponding mechanisms, including repelling adherent bacteria through tailoring surface wettability and mechanically killing bacteria via engineering surface textures. Following this, we present the recent progress in bioinspired active and passive antibacterial strategies. Finally, the biomedical applications and the prospects of these antibacterial surfaces are discussed.

Enabling Antibacterial and Antifouling Coating via Grafting of a Nitric Oxide-Releasing Ionic Liquid on Silicone Rubber

Infections caused by bacteria and biofilms on the surfaces of biomedical devices and implants pose serious threats to public health. Herein, a nitric oxide (NO) gas-releasing quaternary ammonium-type ionic liquid (IL)-based coating on polydimethylsiloxane (PDMS), PDIL-NO, with effective and long-acting antibacterial and antifouling properties was prepared. N-(2-((2, 3-Dimethylbut-3-enoyl)oxy)ethyl)-N, N-dimethyloctan-1-aminium bromide (IL-Br), and 2-methyl-2-propenoic acid 2-(2-methoxyethoxy) ethyl ester were covalently grafted onto the surfaces of PDMS by a thiol-ene click chemical reaction, followed by incorporation of l-proline anions (Pro^-) through anion exchange with Br^- to adsorb NO gas. The prepared PDIL-NO showed a prolonged NO-releasing time (>1440 min) and a relatively high concentration (88 μM). Additionally, PDIL-NO possessed good and long-term antimicrobial activity, and could effectively reduce the adsorption of bovine serum albumin and adhesion of bacteria, as well as inhibit wound infection and reduce inflammation in vivo due to the synergetic effect of IL and the released NO. This study may provide a new approach to combat bacterial infections associated with biomedical devices and implants.

Antibacterial, antifungal, antiviral, and photocatalytic activities of TiO2 nanoparticles, nanocomposites, and bio-nanocomposites: Recent advances and challenges

The applications of nanomaterials specifically metal and metal nanoparticles in various medical and industrial fields have been due to their unique properties compared to bulk materials. A combination of pharmacology and nanotechnology has helped the production of novel antimicrobial agents to control resistant microorganisms of bacteria and fungi. The properties of metal nanoparticles and metal oxides such as titanium dioxide (TiO2), zinc oxide (ZnO), silver (Ag), and copper (Cu) are well known as efficient antimicrobial agents. In particular, TiO2 nanoparticles have been considered as an attractive antimicrobial compound due to their photocatalytic intrinsic and their stable, non-toxic, inexpensive, and safe physicochemical properties. Therefore, in this review, recent advances and challenges of antibacterial, antifungal, antiviral, and photocatalytic activities of TiO2 nanoparticles, nanocomposites, and bio-nanocomposites are presented to help future studies.

Bioinspired Topographic Surface Modification of Biomaterials

Physical surface modification is an approach that has been investigated over the last decade to reduce bacterial adhesion and improve cell attachment to biomaterials. Many techniques have been reported to modify surfaces, including the use of natural sources as inspiration to fabricate topographies on artificial surfaces. Biomimetics is a tool to take advantage of nature to solve human problems. Physical surface modification using animal and vegetal topographies as inspiration to reduce bacterial adhesion and improve cell attachment has been investigated in the last years, and the results have been very promising. However, just a few animal and plant surfaces have been used to modify the surface of biomaterials with these objectives, and only a small number of bacterial species and cell types have been tested. The purpose of this review is to present the most current results on topographic surface modification using animal and plant surfaces as inspiration to modify the surface of biomedical materials with the objective of reducing bacterial adhesion and improving cell behavior.

Nature-Inspired Antimicrobial Surfaces and Their Potential Applications in Food Industries

Antimicrobial resistance (AMR) is a growing global concern and has called for the integration of different areas of expertise for designing robust solutions. One such approach is the development of antimicrobial surfaces to combat the emerging resistance in microbes against drugs and disinfectants. This review is a compressive summary of the work done in the field of material science, chemistry, and microbiology in the development of antimicrobial materials and surfaces that are inspired by examples in nature. The focus includes examples of natural antimicrobial surfaces, such as cicada wings or nanopillars, dragonfly wings, shrimp shells, taro leaves, lotus leaves, sharkskin, gecko skin, and butterfly wings, along with their mechanism of action. Techniques, compositions, and combinations that have been developed to synthetically mimic these surfaces against bacterial/viral and fungal growth in food-processing areas have also been discussed. The applications of synthetic mimics of natural antimicrobial surfaces in food-processing environments is still a naïve area of research. However, this review highlights the potential applications of natural antimicrobial surfaces in the food-processing environment as well as outlines the challenges that need mitigations.

Structure-Element Surface Modification Strategy Enhances the Antibacterial Performance of Zr-BMGs

Zirconium-based metallic glasses (Zr-BMGs) have attracted tremendous attention in healthcare fields, especially in the design of surgical tools and orthopedic implants, due to their unique amorphous structure; however, the application of Zr-BMG-based medical devices is hindered by bacterial contamination. Here, a structure-element strategy is proposed to improve the antibacterial performance of Zr-BMGs by surface laser nanostructuring and silver nanoparticle (AgNP) deposition. The laser nanostructuring process generates a disordered nanoparticle structure (NP) and laser-induced periodic surface structure (LIPSS) to decrease the surface bacterial adhesion and increase the internal antimicrobial ion release. Moreover, after Ag deposition and hydrogen peroxide (H₂O₂) treatment, the antibacterial adhesion ability of the Zr-BMG surface can be further improved without any influence on the crystallization of Zr-BMGs and the release of antibacterial copper/nickel (Cu/Ni). The antibacterial effect of the LIPSS and the NP surfaces presents over 90% bacterial killing ratio, which is superior to that of the naked Zr-BMGs with less than 60% bacterial killing ratio. In vitro and in vivo tests show that the Ag-deposited and H₂O₂-treated LIPSS surfaces exhibit an optimal balance between the antibacterial property and the biocompatibility compared with the polished, NP structured or LIPSS structured surfaces. It is assumed that such structure-element surface modification strategy can improve the antibacterial activity of metal-containing surgical tools and orthopedic implants, improving the success rate of medical treatment.

Functional amyloid-chitin hybrid ink coupled with flexible fabrication approaches for diverse macro and micro-structures

The precise fabrication of artificially designed molecular complexes into ordered structures resembling their natural counterparts would find broad applications but remains a major challenge in the field. Here we genetically design chitin-binding domain (CBD)-containing amyloid proteins, and rationally fabricate well-ordered CBD-containing functional amyloid-chitin complex structures by coupling a top-down manufacturing process with a bottom-up self-assembly. Our fabrication approach starts with the dissolution of both CBD-containing functional amyloid and chitin in hexafluoroisopropanol (HFIP) to make a hybrid ink. This hybrid ink platform, coupled with multiple fabrication methods including airbrushing, electrospinning and soft-lithography, produces a series of unique freestanding structures. The structural features of the products, such as the ability to direct the light path and mimicking of the extracellular matrix enable applications in functional light gratings and cell culture, respectively. Further genetic engineering of the protein component allowed tunable functionalization of these materials, including nanoparticle immobilization and protein conjugation, resulting in broad applications in electronic devices and enzyme immobilization. Our technological platform can drive new advances in biocatalysis, tissue engineering, biomedicine, photonics and electronics.

Biomaterials assisted reconstructive urology: The pursuit of an implantable bioengineered neo-urinary bladder

Urinary bladder is a dynamic organ performing complex physiological activities. Together with ureters and urethra, it forms the lower urinary tract that facilitates urine collection, low-pressure storage, and volitional voiding. However, pathological disorders are often liable to cause irreversible damage and compromise the normal functionality of the bladder, necessitating surgical intervention for a reconstructive procedure. Non-urinary autologous grafts, primarily derived from gastrointestinal tract, have long been the gold standard in clinics to augment or to replace the diseased bladder tissue. Unfortunately, such treatment strategy is commonly associated with several clinical complications. In absence of an optimal autologous therapy, a biomaterial based bioengineered platform is an attractive prospect revolutionizing the modern urology. Predictably, extensive investigative research has been carried out in pursuit of better urological biomaterials, that overcome the limitations of conventional gastrointestinal graft. Against the above backdrop, this review aims to provide a comprehensive and one-stop update on different biomaterial-based strategies that have been proposed and explored over the past 60 years to restore the dynamic function of the otherwise dysfunctional bladder tissue. Broadly, two unique perspectives of bladder tissue engineering and total alloplastic bladder replacement are critically discussed in terms of their status and progress. While the former is pivoted on scaffold mediated regenerative medicine; in contrast, the latter is directed towards the development of a biostable bladder prosthesis. Together, these routes share a common aspiration of designing and creating a functional equivalent of the bladder wall, albeit, using fundamentally different aspects of biocompatibility and clinical needs. Therefore, an attempt has been made to systematically analyze and summarize the evolution of various classes as well as generations of polymeric biomaterials in urology. Considerable emphasis has been laid on explaining the bioengineering methodologies, pre-clinical and clinical outcomes. Some of the unaddressed challenges, including vascularization, innervation, hollow 3D prototype fabrication and urinary encrustation, have been highlighted that currently delay the successful commercial translation. More importantly, the rapidly evolving and expanding concepts of bioelectronic medicine are discussed to inspire future research efforts towards the further advancement of the field. At the closure, crucial insights are provided to forge the biomaterial assisted reconstruction as a long-term therapeutic strategy in urological practice for patients' care.

Impact of surface topography on the bacterial attachment to micro- and nano-patterned polymer films

The development of antimicrobial surfaces has become a high priority in recent times. There are two ongoing worldwide health crises: the COVID-19 pandemic provoked by the SARS-CoV-2 virus and the antibiotic-resistant diseases provoked by bacteria resistant to antibiotic-based treatments. The need for antimicrobial surfaces against bacteria and virus is a common factor to both crises. Most extended strategies to prevent bacterial associated infections rely on chemical based-approaches based on surface coatings or biocide encapsulated agents that release chemical agents. A critical limitation of these chemistry-based strategies is their limited effectiveness in time while grows the concerns about the long-term toxicity on human beings and environment pollution. An alternative strategy to prevent bacterial attachment consists in the introduction of physical modification to the surface. Pursuing this chemistry-independent strategy, we present a fabrication process of surface topographies [one-level (micro, nano) and hierarchical (micro+nano) structures] in polypropylene (PP) substrates and discuss how wettability, topography and patterns size influence on its antibacterial properties. Using nanoimprint lithography as patterning technique, we report as best results 82 and 86% reduction in the bacterial attachment of E. coli and S. aureus for hierarchically patterned samples compared to unpatterned reference surfaces. Furthermore, we benchmark the mechanical properties of the patterned PP surfaces against commercially available antimicrobial films and provide evidence for the patterned PP films to be suitable candidates for use as antibacterial functional surfaces in a hospital environment.

Physically Switchable Antimicrobial Surfaces and Coatings: General Concept and Recent Achievements

Bacterial environmental colonization and subsequent biofilm formation on surfaces represents a significant and alarming problem in various fields, ranging from contamination of medical devices up to safe food packaging. Therefore, the development of surfaces resistant to bacterial colonization is a challenging and actively solved task. In this field, the current promising direction is the design and creation of nanostructured smart surfaces with on-demand activated amicrobial protection. Various surface activation methods have been described recently. In this review article, we focused on the "physical" activation of nanostructured surfaces. In the first part of the review, we briefly describe the basic principles and common approaches of external stimulus application and surface activation, including the temperature-, light-, electric- or magnetic-field-based surface triggering, as well as mechanically induced surface antimicrobial protection. In the latter part, the recent achievements in the field of smart antimicrobial surfaces with physical activation are discussed, with special attention on multiresponsive or multifunctional physically activated coatings. In particular, we mainly discussed the multistimuli surface triggering, which ensures a better degree of surface properties control, as well as simultaneous utilization of several strategies for surface protection, based on a principally different mechanism of antimicrobial action. We also mentioned several recent trends, including the development of the to-detect and to-kill hybrid approach, which ensures the surface activation in a right place at a right time.

Low Air Drag Surface via Multilayer Hierarchical Riblets

Riblets inspired by shark skin exhibit a great air drag reduction potential in many industries, such as the aircraft, energy, and transportation industries. Many studies have reported that blade riblets attain the highest air drag reduction ability, with a current limit of ∼11%. Here, we propose multilayer hierarchical riblets (MLHRs) to further improve the air drag reduction ability. MLHRs were fabricated via a three-layer hybrid mask lithography method, and the air drag reduction ability was studied in a closed air channel. The experimental results indicated that the maximum air drag reduction achieved with MLHRs in the closed channel was 16.67%, which represents a 52% higher reduction than the highest previously reported. Conceptual models were proposed to explain the experiments from a microscopic perspective. MLHRs enhanced the stability of lifting and pinning vortices, while vortices gradually decelerated further, reducing the momentum exchange occurring near the wall. This verified that MLHRs overcome the current air drag reduction limit of riblets. The conceptual models lay a foundation to further improve the air drag reduction ability of riblets.

Nanofabrication Techniques: Challenges and Future Prospects

Nanofabrication of functional micro/nano-features is becoming increasingly relevant in various electronic, photonic, energy, and biological devices globally. The development of these devices with special characteristics originates from the integration of low-cost and high-quality micro/nano-features into 3D-designs. Great progress has been achieved in recent years for the fabrication of micro/nanostructured based devices by using different imprinting techniques. The key problems are designing techniques/approaches with adequate resolution and consistency with specific materials. By considering optical device fabrication on the large-scale as a context, we discussed the considerations involved in product fabrication processes compatibility, the feature's functionality, and capability of bottom-up and top-down processes. This review summarizes the recent developments in these areas with an emphasis on established techniques for the micro/nano-fabrication of 3-dimensional structured devices on large-scale. Moreover, numerous potential applications and innovative products based on the large-scale are also demonstrated. Finally, prospects, challenges, and future directions for device fabrication are addressed precisely.

Three-dimensional printing of molluscan shell inspired architectures via fused deposition modeling

Nature always astonishes us with its marvelous creations which act as a model for acquiring a solution to complex human problems, this practice of designing and manufacturing the product replicating processes that occur in nature is referred to as biomimicking. Molluscan shell is nature's one such offering that delivers remarkable mechanical properties by virtue of its hierarchical multi-layered structure. In this work, a peculiar avenue for facile biomimicking multitudinous molluscan shell architectures such as complex cross lamellar, cross lamellar, foliated, prismatic, columnar nacre, and sheet nacre structure are manufactured by 3D prototyping of biodegradable, biocompatible polylactic acid (PLA). Here, the reliance of mechanical attributes of PLA on various architectures is studied and demonstrated that the nacre, owing to its complex structure, leads to high energy dissipation (12.5094 J/m) imparting high toughness.

Light output enhancement of scintillators by using mixed-scale microstructures

Scintillators play an important role in the field of nuclear radiation detection. However, the light output of the scintillators is often limited by total internal reflection due to the high refractive indices of the scintillators. Furthermore, the light emission from scintillators typically has an approximately Lambertian profile, which is detrimental to the collection of the light. In this paper, we demonstrate a promising method to achieve enhancement of the light output from scintillators through use of mixed-scale microstructures that are composed of a photonic crystal slab and a microlens array. Simulations and experimental results both show significant improvements in the scintillator light output. The X-ray imaging characteristics of scintillators are improved by the application of the mixed-scale microstructures. The results presented here suggest that the application of the proposed mixed-scale microstructures to scintillators will be beneficial in the nuclear radiation detection field.

Host-Pathogen Adhesion as the Basis of Innovative Diagnostics for Emerging Pathogens

Infectious diseases are an existential health threat, potentiated by emerging and re-emerging viruses and increasing bacterial antibiotic resistance. Targeted treatment of infectious diseases requires precision diagnostics, especially in cases where broad-range therapeutics such as antibiotics fail. There is thus an increasing need for new approaches to develop sensitive and specific in vitro diagnostic (IVD) tests. Basic science and translational research are needed to identify key microbial molecules as diagnostic targets, to identify relevant host counterparts, and to use this knowledge in developing or improving IVD. In this regard, an overlooked feature is the capacity of pathogens to adhere specifically to host cells and tissues. The molecular entities relevant for pathogen–surface interaction are the so-called adhesins. Adhesins vary from protein compounds to (poly-)saccharides or lipid structures that interact with eukaryotic host cell matrix molecules and receptors. Such interactions co-define the specificity and sensitivity of a diagnostic test. Currently, adhesin-receptor binding is typically used in the pre-analytical phase of IVD tests, focusing on pathogen enrichment. Further exploration of adhesin–ligand interaction, supported by present high-throughput “omics” technologies, might stimulate a new generation of broadly applicable pathogen detection and characterization tools. This review describes recent results of novel structure-defining technologies allowing for detailed molecular analysis of adhesins, their receptors and complexes. Since the host ligands evolve slowly, the corresponding adhesin interaction is under selective pressure to maintain a constant receptor binding domain. IVD should exploit such conserved binding sites and, in particular, use the human ligand to enrich the pathogen. We provide an inventory of methods based on adhesion factors and pathogen attachment mechanisms, which can also be of relevance to currently emerging pathogens, including SARS-CoV-2, the causative agent of COVID-19.

Efficient Prevention of Marine Biofilm Formation Employing a Surface-Grafted Repellent Marine Peptide

Creation of surfaces resistant to the formation of microbial biofilms via biomimicry has been heralded as a promising strategy to protect a range of different materials ranging from boat hulls to medical devices and surgical instruments. In our current study, we describe the successful transfer of a highly effective natural marine biofilm inhibitor to the 2D surface format. A series of cyclic peptides inspired by the natural equinatoxin II protein produced by Beadlet anemone (Actinia equine) have been evaluated for their ability to inhibit the formation of a mixed marine microbial consortium on polyamide reverse osmosis membranes. In solution, the peptides are shown to effectively inhibit settlement and biofilm formation in a nontoxic manner down to 1 nM concentrations. In addition, our study also illustrates how the peptides can be applied to disperse already established biofilms. Attachment of a hydrophobic palmitic acid tail generates a peptide suited for strong noncovalent surface interactions and allows the generation of stable noncovalent coatings. These adsorbed peptides remain attached to the surface at significant shear stress and also remain active, effectively preventing the biofilm formation over 24 h. Finally, the covalent attachment of the peptides to an acrylate surface was also evaluated and the prepared coatings display a remarkable ability to prevent surface colonization at surface loadings of 55 ng/cm² over 48 h. The ability to retain the nontoxic antibiofilm activity, documented in solution, in the covalent 2D-format is unprecedented, and this natural peptide motif displays high potential in several material application areas.

Bactericidal efficiency of micro- and nanostructured surfaces: a critical perspective

Micro/nanostructured surfaces (MNSS) have shown the ability to inactivate bacterial cells by physical means. An enormous amount of research has been conducted in this area over the past decade. Here, we review the various surface factors that affect the bactericidal efficiency. For example, surface hydrophobicity of the substrate has been accepted to be influential on the bactericidal effect of the surface, but a review of the literature suggests that the influence of hydrophobicity differs with the bacterial species. Also, various bacterial viability quantification methods on MNSS are critically reviewed for their suitability for the purpose, and limitations of currently used protocols are discussed. Presently used static bacterial viability assays do not represent the conditions of which those surfaces could be applied. Such application conditions do have overlaying fluid flow, and bacterial behaviours are drastically different under flow conditions compared to under static conditions. Hence, it is proposed that the bactericidal effect should be assessed under relevant fluid flow conditions with factors such as shear stress and flowrate given due significance. This review will provide a range of opportunities for future research in design and engineering of micro/nanostructured surfaces with varying experimental conditions.

Effects of Hydrophilicity, Adhesion Work, and Fluid Flow on Biofilm Formation of PDMS in Microfluidic Systems

Polydimethylsiloxane (PDMS) has been the most widely used material in microfluidic systems, especially for cell biology applications. However, the antibacterial performance of PDMS in flow conditions has never been reported in the literature. In this paper, we analyzed the effects of contact angle (CA), adhesion force (work), and surface free energy on the antibacterial activities of PDMS by varying the ratio of curing agents (crosslinking degree) and surface modification with oxygen plasma. The results show that the Young's modulus has no particular effects on bacterial adhesion compared to the CAs of samples. For the first time, we analyzed the adhesion work (AW) effect on biofilm formation, and we found that biofilms tend to form on the surface with less AW. Furthermore, we analyzed the dual effect of hydrophilicity and shear force induced by fluid flow on the bacterial adhesion in PDMS microfluidic systems. We found that at low flow rates in microfluidic conditions, the adhesion of the bacteria on the PDMS surface is inhibited when the fluid flow exceeds a certain value. It required higher shear force to inhibit bacterial adhesion on the hydrophilic surface than on the hydrophobic surface. Therefore, hydrophilicity might be the dominant factor affecting bacterial adhesion.

Biological and bioinspired materials: Structure leading to functional and mechanical performance

Nature has achieved materials with properties and mechanisms that go far beyond the current know-how of the engineering-materials industry. The remarkable efficiency of biological materials, such as their exceptional properties that rely on weak constituents, high performance per unit mass, and diverse functionalities in addition to mechanical properties, has been mostly attributed to their hierarchical structure. Key strategies for bioinspired materials include formulating the fundamental understanding of biological materials that act as inspiration, correlating this fundamental understanding to engineering needs/problems, and fabricating hierarchically structured materials with enhanced properties accordingly. The vast, existing literature on biological and bioinspired materials can be discussed in terms of functional and mechanical aspects. Through essential representative properties and materials, the development of bioinspired materials utilizes the design strategies from biological systems to innovatively augment material performance for various practical applications, such as marine, aerospace, medical, and civil engineering. Despite the current challenges, bioinspired materials have become an important part in promoting innovations and breakthroughs in the modern materials industry.

Synergistic Antimicrobial Activity of a Nanopillar Surface on a Chitosan Hydrogel

Despite ongoing efforts and technology development, the contamination of medical device surfaces by disease-causing microbes remains problematic. Two approaches to producing antimicrobial surfaces are using antimicrobial materials and applying physical topography such as nanopatterns. In this work, we describe the use of physical topography on a soft hydrogel to control microbial growth. We demonstrate this approach by using chitosan hydrogel films with nanopillars having periodicities ranging from 300 to 500 nm. The flat hydrophilic chitosan films exhibit antimicrobial activity against the pathogenic bacteria Pseudomonas aeruginosa and filamentous fungi Fusarium oxysporum. The addition of nanopillars to the hydrogel surface further reduces the growth of P. aeruginosa and F. oxysporum up to ∼52 and ∼99%, respectively. Multiple modes of antimicrobial action appear to act synergistically to inhibit microbial growth on the nanopillar hydrogels. We verified that the strongly bactericidal and fungicidal nanopillared material retains biocompatibility to human epithelial cells with the MTT assay. The nanopillared material is a promising candidate for applications that require a biocompatible and antimicrobial film. The study demonstrates that taking advantage of multiple modes of antimicrobial action can effectively inhibit pathogenic microbial growth.