Formation Combined with Intercalation of Ni and Its Alloy Nanoparticles within Mesoporous Silica for Robust Catalytic Reactions

Enhanced Selective Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol over Silica-Coated Pt-CoxOy Hybrid Nanoparticles

Selective hydrogenation of cinnamaldehyde (CAL) to cinnamyl alcohol (COL) is difficult due to the intrinsic difficulty with thermodynamically easier hydrogenation of C═C bonds. In this work, Pt-CoxOy hybrid nanoparticles encapsulated in mesoporous silica nanospheres (Pt-CoxOy@mSiO2) were synthesized by a sol-gel method, which showed greatly improved COL selectivity for hydrogenation of CAL. At 80 °C and 1.0 MPa of H2, Pt-CoxOy@mSiO2 achieved a CAL conversion of 98.7% with a COL selectivity of 93.5%. In contrast, Pt@mSiO2 yields 3-phenylpropanol (HCOL) as the major product with HCOL selectivity of 67.2%, while PtCo@mSiO2 yields 3-phenylpropionaldehyde with selectivity of 51.8% under the same conditions. The enhanced catalytic performance of Pt-CoxOy@mSiO2 for hydrogenation of CAL to COL is ascribed to the Pt surface electron deficiency induced by metal-oxide interaction, and the protection of active NPs by silica shells results in good catalytic stability.

In situ construction of 3D NiMo bimetallic catalysts anchored on dendritic mesoporous silica for the upgrading of biomass derivatives

Reasonable construction of bi-function catalysts with well dispersed hydrogenation active sites and acidic sites are crucial for the hydrodeoxygenation (HDO) of biomass-derived compounds but still a huge challenge. Herein, a 3D Mo functionalized Ni-based bimetallic embedded catalyst with fine metal nanoparticles size (<6 nm) was prepared for the first time using dendritic mesoporous silica as a sacrificial template by one-pot hydrothermal synthesis and adopted in the HDO process of vanillin (VAN) upgrade to 2-methoxy-4-methylphenol (MMP). The characterization results illustrated that Mo species regulated the acidity of the catalyst and promoted the formation of Ni-Mo alloy sites. Density functional theory (DFT) calculations further unveiled that Ni-Mo alloy sites promoted the activation and dissociation of CO bond in VAN, enhanced the ability of protonation hydrogenolysis. Benefitting from the synergistic effect of the highly uniformly dispersed hydrogenation metal sites and acidic sites, nearly 100% yield of MMP could obtained over the designed catalyst under mild conditions (130 °C, 1.5 MPa H₂, 3 h, 10 wt% catalyst dosage). Additionally, the NiMo_0.1@MSN catalyst displayed robust activity for no less than 8 recycles and excellent universality for the HDO of a variety of lignin derivatives and biomass platform molecules, which provide a feasible strategy for the construction of 3D confined catalysts for the high-efficiency HDO of biomass derivatives.

Construction of N-Doped Carbon-Modified Ni/SiO2 Catalyst Promoting Cinnamaldehyde Selective Hydrogenation

At present, the selective hydrogenation of α, β-unsaturated aldehydes remains a challenge due to competition between unsaturated functional groups (C=C and C=O). In this study, N-doped carbon deposited on silica-supported nickel Mott-Schottky type catalysts (Ni/SiO₂@N_xC) was prepared for the selective hydrogenation of cinnamaldehyde (CAL) by using the respective hydrothermal method and high-temperature carbonization method. The prepared optimal Ni/SiO₂@N₇C catalyst achieved 98.9% conversion and 83.1% selectivity for 3-phenylpropionaldehyde (HCAL) in the selective hydrogenation reaction of CAL. By constructing the Mott-Schottky effect, the electron transfer from metallic Ni to N-doped carbon at their contact interface was promoted, and the electron transfer was demonstrated by XPS and UPS. Experimental results indicated that by modulating the electron density of metallic Ni, the catalytic hydrogenation of C=C bonds was preferentially performed to obtain higher HCAL selectivity. Meanwhile, this work also provides an effective way to design electronically adjustable type catalysts for more selective hydrogenation reactions.

Tuning the basicity of the Ni@MCM-41 catalyst via alkaline earth metal oxide promoters for CO2 reforming of CH4

Dry reforming of methane (DRM) is an effective method to change two main greenhouse gases (CH4 and CO2) into valuable chemicals such as hydrogen.

General Strategy toward Hydrophilic Single Atom Catalysts for Efficient Selective Hydrogenation

Well dispersible and stable single atom catalysts (SACs) with hydrophilic features are highly desirable for selective hydrogenation reactions in hydrophilic solvents towards important chemicals and pharmaceutical intermediates. A general strategy is reported for the fabrication of hydrophilic SACs by cation-exchange approach. The cation-exchange between metal ions (M = Ni, Fe, Co, Cu) and Na⁺ ions introduced in the skeleton of metal oxide (TiO₂ or ZrO₂ ) nanoshells plays the key role in forming M₁ /TiO₂ and M₁ /ZrO₂ SACs, which efficiently prevents the aggregation of the exchanged metal ions. The as-obtained SACs are highly dispersible and stable in hydrophilic solvents including alcohol and water, which greatly facilitates the catalysis reaction in alcohol. The Ni₁ /TiO₂ SACs have been successfully utilized as catalysts for the selective C=C hydrogenation of cinnamaldehyde to produce phenylpropanal with 98% conversion, over 90% selectivity, good recyclability, and a turnover frequency (TOF) of 102 h^-1 , overwhelming most reported catalysts including noble metal catalysts.

Silica-Enveloped 2D-Sheet-to-Nanocrystals Conversion for Resilient Catalytic Dry Reforming of Methane

Here, lamellar confinement strategy is introduced for "sheet-to-nanocrystals (NCs)" conversion within a 2D-SiO₂ envelope, which constructs a catalytic nanocartridge holding a platoon of isolated and in-plane-aligned ultrasmall Ni-NCs, performing as a robust and coking-resistant catalytic system for dry reforming of methane. Overcoming the problem of unavoidable bulk crystal growth from multiple sheets-stack or sheet-on-open-support, silica bilayer-encasing tightly clamps the atomic-thin Ni(OH)₂ -nanosheet during thermal conversion and further hinders the migratory fusion of the resultant Ni-NCs. Upon heating-cooling cycle, the flapping silica envelope clutches the Ni-NCs like "eggs in a carton," subsequently, ensuring their thermal stability. Owing to the unique 2D-enveloped rigid architecture, Ni-NCs can circumvent sintering and coke deposition while tolerating the high temperatures (>700 °C) for long operation (>100 h), affording high conversions to syngas.

Versatile Hollow ZSM-5 Nanoreactors Loaded with Tailorable Metal Catalysts for Selective Hydrogenation Reactions

Zeolites are one of the most commonly used materials in the chemical industry, acting as catalysts or catalyst supports in different applications. Recently, the synthesis and functionalization of hollow zeolites have attracted many research interests, owing to the unique advantages of their hollow morphology. In the development of more sustainable processes, the hollow zeolites are often endowed with additional stability, selectivity, and activity. Herein, we present a stepwise synthetic protocol to prepare a range of complex hollow ZSM-5 catalysts with catalytic nanoparticles. Solid ZSM-5 crystals were first synthesized from Stöber silica spheres. This solid ZSM-5 sample was then loaded with transition metals via the impregnation method. A subsequent hollowing process was carried out in hydrothermal conditions in which hollow ZSM-5 crystals with confined transition metals inside were synthesized. More specifically, after the encapsulation of transition metals inside hollow ZSM-5, two different approaches have been further devised to allow the deposition of noble metals into the interior cavities or onto the exterior surfaces of the hollow ZSM-5. The deposition of Pt on the exterior surface was carried out by mixing the hollow ZSM-5 sample with presynthesized Pt nanoparticles. Loading of Pd in the interior was achieved by the galvanic replacement reaction between the Pd ions and embedded transition metals inside the hollow ZSM-5 sample. The catalytic performance of these reactor-like nanocatalysts has been evaluated with hydrogenation reactions in both liquid and gas phases, and their compositional and structural merits have been illustrated. For the hollow ZSM-5 sample with Pd loaded inside, liquid-phase selective hydrogenation of styrene over 4-vinylbiphenyl has been achieved with the ZSM-5 shell acting as a molecular sieve. The deposition of Pt on the exterior has improved the C₂-C₄ product yield when tested for the gas-phase CO₂ hydrogenation reaction.

Platinum and cobalt intermetallic nanoparticles confined within MIL-101(Cr) for enhanced selective hydrogenation of the carbonyl bond in α,β-unsaturated aldehydes: synergistic effects of electronically modified Pt sites and Lewis acid sites

PtCo/MIL-101(Cr) with high uniform dispersion Pt–Co IMNs synthesized by a polyol reduction method show higher activity for selective catalytic hydrogenation of α,β-unsaturated aldehydes due to the synergistic effect of PtCo and MIL-101(Cr) support.

Synthesis of Mesoporous Copper Aluminosilicate Hollow Spheres for Oxidation Reactions

Hollow functional metal silicate materials have received the most interest due to their large inner space, permeable and functional shell, lighter density, and better use of material compared to their solid counterparts. While tremendous success has been made in the synthesis of individual metal silicates with uniform morphology, the synthesis of multiphase hollow silicates has not been explored yet, although their direct applications could be promising. In this study, mesoporous aluminosilicate spheres (MASS) are transformed to submicrometer copper aluminosilicate hollow spheres (CASHS) via a one-pot hydrothermal process. CASHS has a hollow interior with Cu-Al-Si thorn-like moieties in a lamellar structure on its outer shell. The structure and morphology of CASHS are unique and different from the previously reported tubular copper silicates that are emanated from Stöber silica spheres. Herein, we also demonstrate that the extent of hollowing in CASHS can be attained by controlling the aluminum content of pristine MASS, highlighting the existence of parameters for in situ controlling the shell thickness of hollow materials. The application of CASHS as a potential heterogeneous catalyst has been directed to important oxidation processes such as olefin oxidation and the advanced oxidation process (AOP). In cyclohexene oxidation, for instance, high selectivity to cyclohex-2-en-1-one is achieved under moderate conditions using tert-butyl hydroperoxide as the oxidant. CASHS is a robust heterogeneous catalyst and recyclable for this reaction. CASHS-derived catalysts also favor AOP and enhance the removal of cationic dyes together with H₂O₂ through an adsorption-degradation process.

Spherical Polyelectrolyte Brushes as Templates to Prepare Hollow Silica Spheres Encapsulating Metal Nanoparticles

Integrating hollow silica spheres with metal nanoparticles to fabricate multifunctional hybrid materials has attracted increasing attention in catalysis, detection, and drug delivery. Here, we report a simple and general method to prepare hollow silica spheres encapsulating silver nanoparticles (Ag@SiO₂) based on spherical polyelectrolyte brushes (SPB), which consist of a polystyrene core and densely grafted poly (acrylic acid) (PAA) chains. SPB were firstly used as nanoreactors to generate silver nanoparticles in situ and then used as sacrificial templates to prepare hybrid hollow silica spheres. The resulted Ag@SiO₂ composites exhibit high catalytic activity and good reusability for the reduction of 4-nitrophenol to 4-aminophenol by NaBH₄. More importantly, this developed approach can be extended to the encapsulation of other metal nanoparticles such as gold nanoparticles into the hollow silica spheres. This work demonstrates that SPB are promising candidates for the preparation of hollow spheres with encapsulated metal nanoparticles and the resulted hybrid spheres show great potential applications in catalysis.

Transformation of Stöber Silica Spheres to Hollow Hierarchical Single-Crystal ZSM-5 Zeolites with Encapsulated Metal Nanocatalysts for Selective Catalysis

The activity of zeolite-supported nanocatalysts is dependent on both the dispersion, size, and location of metal nanoparticles around the zeolite and the size and pore structure of the zeolite. In this study, a synthetic approach was developed to encapsulate metal catalysts within hollow interiors of single-crystal ZSM-5. Briefly, Stöber silica spheres were synthesized and then transformed to single-crystal nano-ZSM-5 (Si/Al = 60), followed by growth of embedded metal nanoparticles and subsequently creation of a nanosized (30-50 nm shell thickness) hollow hierarchical zeolite structure. Metal nanoparticles such as Co, Cu, Cu-Zn, Fe, and Ni can be supported on the inner wall of the hollow zeolite and the surrounding satellite mesopores, without any particles present on the external zeolite surface. When evaluated as a catalyst for the Fischer-Trøpsch reaction, the Fe@h-ZSM5 catalyst shows high activity, sintering and coking resistance (50% longer stability than Fe@ZSM5), and secondary cracking reactions in the acid sites in the ZSM-5 shell, which reduce C₅₊ hydrocarbon selectivity and increase smaller-chain hydrocarbon selectivity. In addition, when Pt was further deposited inside the hollow structure, shape-selective alkene hydrogenation was demonstrated. These configured nanoscale zeolite catalysts have potential applications for reactions that involve supported metal nanoparticle catalysis, shape selectivity, or secondary cracking reactions.

Corrosion Engineering To Synthesize Ultrasmall and Monodisperse Alloy Nanoparticles Stabilized in Ultrathin Cobalt (Oxy)hydroxide for Enhanced Electrocatalysis

Two-dimensional (2D) nanomaterials decorated with ultrasmall and well-alloyed bimetallic nanoparticles (NPs) have many important applications. Developing a facile and scalable 2D material/hybrid synthesis strategy is still a big challenge. Herein, a top-down corrosion strategy is developed to prepare ultrathin cobalt (oxy)hydroxide nanosheets decorated with ultrasmall (∼1.6 nm) alloy NPs. The formation of ultrathin (oxy)hydroxide nanosheets has a restrain effect to prevent the growth of small NPs into bigger ones. Thanks to the ultrathin 2D nature and strong electronic interaction between Co(OH)₂ and alloy NPs, the Pt-based binary alloy NPs are greatly stabilized by the Co(OH)₂ nanosheets and the hybrids exhibit much enhanced electrocatalytic performance for water splitting. Especially, the mass activities of the PtPd- and PtCu-decorated samples for hydrogen evolution are ∼8 times that of Pt/C. When used as both cathode and anode electrocatalysts to split water, the hybrid nanosheets outperform the commercial Pt/C-RuO₂ combination. At 10 mA cm^-2, the needed potential is only 1.53 V. This work provides us a highly controllable and scalable means to produce clean 2D nanomaterials decorated with a series of alloy NPs such as PtPd, PtCu, AuNi, and so forth.

Multiple Drug Delivery from Mesoporous Coating Realizing Combination Therapy for Bare Metal Stents

The simultaneous loading of multifunctional drugs has been regarded as one of the major challenges in the drug delivery system. Herein, a mesoporous silica coating was constructed on a bare metal stent surface by an evaporation-induced self-assembly method, in which both hydrophilic and hydrophobic drugs (heparin and rapamycin) were encapsulated by a one-pot method for the first time, and the release behaviors of these drugs were studied. The releasing mechanisms of these drugs were investigated in detail. Rapid release of heparin can achieve anticoagulation and endothelialization, whereas slow release of rapamycin can realize antiproliferative therapy for long term. In vitro hemocompatibility and promotion for proliferation of vein endothelial cells and the inhibition of smooth muscle cells were conducted. In vivo stent implantation results verify that the mesoporous silica coating with both heparin and rapamycin can successfully accelerate the endothelialization process and realize the antiproliferative therapy for as long as 3 months. These results indicate that this multifunctional mesoporous coating containing both hydrophilic and hydrophobic drugs might be a promising stent coating in the future.

Highly active and stable copper catalysts derived from copper silicate double-shell nanofibers with strong metal–support interactions for the RWGS reaction

Double-shell hollow nanofiber supported copper catalysts with strong metal–support interactions were prepared and applied in the reverse water–gas shift reaction.