Superwettable Microwell Arrays Constructed by Photocatalysis of Silver-Doped-ZnO Nanorods for Ultrasensitive and High-Throughput Electroanalysis of Glutathione in Hela Cells

Transition metal compounds: From properties, applications to wettability regulation

Transition metal compounds (TMCs) have the advantages of abundant reserves, low cost, non-toxic and pollution-free, and have attracted wide attention in recent years. With the development of two-dimensional layered materials, a new two-dimensional transition metal carbonitride (MXene) has attracted extensive attention due to its excellent physicochemical properties such as gas selectivity, photocatalytic properties, electromagnetic interference shielding and photothermal properties. They are widely used in gas sensors, oil/water separation, wastewater and waste-oil treatment, cancer treatment, seawater desalination, strain sensors, medical materials and some energy storage materials. In this view, we aim to emphatically summarize MXene with their properties, applications and their wettability regulation in different applications. In addition, the properties of transition metal oxides (TMOs) and other TMCs and their wettability regulation applications are also discussed.

Magnetic Bead Manipulation in Microfluidic Chips for Biological Application

Magnetic beads manipulation in microfluidic chips is a promising research field for biological application, especially in the detection of biological targets. In this review, we intend to present a thorough and in-depth overview of recent magnetic beads manipulation in microfluidic chips and its biological application. First, we introduce the mechanism of magnetic manipulation in microfluidic chip, including force analysis, particle properties, and surface modification. Then, we compare some existing methods of magnetic manipulation in microfluidic chip and list their biological application. Besides, the suggestions and outlook for future developments in the magnetic manipulation system are also discussed and summarized.

Interfacial design for detection of a few molecules

Major advances in molecular detection are being driven by goals associated with the development of methods that are amenable to miniaturization and automation, and that have high sensitivity and low interference. The new detection methods are confronted by many interfacial issues, which when properly addressed can lead to improved performance. One interfacial property, special wettability, can facilitate precise delivery and local enrichment of molecules to sensing elements. This review summarizes applications of unique features of special wettability in molecular detection including (1) chemical and electrochemical reactions in anchored microdroplets on superwetting surfaces, (2) enrichment of analytes and active materials at low contact areas between droplets and superwetting surfaces, (3) complete opposite affinities of superwetting surfaces toward nonpolar/polar solutes and oil/water phases, and (4) directional droplet transportation on asymmetric superwetting surfaces. The challenges and opportunities that exist in design and applications of special wettability in interfacial delivery and enrichment for detection of a few molecules are also discussed.

Signal On-Off Electrochemical Sensor for Glutathione Based on a AuCu-Decorated Zr-Containing Metal-Organic Framework via Solid-State Electrochemistry of Cuprous Chloride

A novel signal on-off glutathione (GSH) electrochemical sensor was developed based on a AuCu bimetal-decorated Zr-containing metal-organic framework (Zr-MOF), in which a signal amplification strategy promoted by solid-state electrochemistry of cuprous chloride (CuCl) was used. The Zr-MOF with a large surface area can be effectively used as the substrate for the in situ growth of AuCu bimetals to obtain the Zr-MOF@AuCu nanocomposite. The interaction between Cu in Zr-MOF@AuCu and Cl^- in the solution accompanied with the formation of CuCl displays an enlarged stable oxidation current, which greatly declines with the addition of GSH owing to the specific Cu-GSH interaction. The conversion of CuCl into Cu-GSH triggered the "crowding-out effect" and resulted in a sharp drop in the peak current of CuCl, which can realize the ultrasensitive and selective detection of GSH. The detection mechanism was investigated, and the detection range was 10 pM-1 mM with the detection limit as low as 2.67 pM. The special response mechanism for the detection of GSH allows the highly selective detection of GSH in various real samples with reliable results, endowing the proposed electroanalysis sensor with broad application prospects in biological and food analysis.

Bioinspired superwettable electrodes towards electrochemical biosensing

Superwettable materials have attracted much attention due to their fascinating properties and great promise in several fields. Recently, superwettable materials have injected new vitality into electrochemical biosensors. Superwettable electrodes exhibit unique advantages, including large electrochemical active areas, electrochemical dynamics acceleration, and optimized management of mass transfer. In this review, the electrochemical reaction process at electrode/electrolyte interfaces and some fundamental understanding of superwettable materials are discussed. Then progress in different electrodes has been summarized, including superhydrophilic, superhydrophobic, superaerophilic, superaerophobic, and superwettable micropatterned electrodes, electrodes with switchable wettabilities, and electrodes with Janus wettabilities. Moreover, we also discussed the development of superwettable materials for wearable electrochemical sensors. Finally, our perspective for future research is presented.

Incorporation of a Z-scheme AgI/Ag6Si2O7 heterojunction to PET fabric for efficient and repeatable photocatalytic dye degradation

Anchoring the Z-scheme AgI/Ag6Si2O7 photocatalyst on PET fabric facilitates reuse. AgI enhances the separation effect of photogenerated carriers. The photocatalytic activity and stability of AgI/Ag6Si2O7/PET composites are greatly improved.

Fabricating a wettable microwells array onto a nitrogen plasma-treated ITO substrate: high-throughput fluorimetric platform for selective sensing of ammonia in blood using polymer-stabilized NH2-MIL-125

A high-throughput and selective fluorimetric platform has been constructed for the analysis of ammonia in blood by using a polymer-stabilized metal-organic framework (MOF) of porous NH2-MIL-125, which was coated onto a wettable microwells array constructed on an indium tin oxide (ITO) substrate. It was found that the nitrogen plasma treatment for the ITO substrate could create a super-hydrophilic interface that combined with the hydrophobic pattern yielded a wettable microwells array, enabling the condensation-based enrichment of targets from the sample droplets. Moreover, the NH2-MIL-125 MOF encapsulated using polymers could be firmly coated onto the microwells to act as fluorescent probes for sensing NH3 with enhanced responses. In addition, the use of the polymer polyvinyl pyrrolidone could protect and stabilize the crystals of NH2-MIL-125 probe in aqueous media, revealing the improved hydrophilicity and significantly depressed signal background. The as-developed fluorimetric platform, containing a MOF-coated microwells array, can enable the detection of ammonia in blood, with concentrations ranging linearly from 0.10 to 300 μM. More importantly, this plasma treatment-based fabrication route may hold promise for designing different wettable microwells arrays for the high-throughput detection of multiple targets in the fields of biomedical analysis and environmental monitoring.

A sensitive and rapid detection of glutathione based on a fluorescence-enhanced "turn-on" strategy

Glutathione (GSH) plays important roles in the human body including protecting cells from oxidative damages and maintaining cellular redox homeostasis. Thus, developing a fast and sensitive method for detecting GSH levels in living bodies is of great importance. Many methods have been developed and used for GSH detection, such as high-performance liquid chromatography, capillary electrophoresis, and fluorescence resonance energy-based methods. However, these methods often lack sensitivity as well as efficiency. Herein, a rapid and sensitive method for glutathione detection was developed based on a fluorescence-enhanced "turn-on" strategy. In this study, a unique and versatile bifunctional linker 3-[(2-aminoethyl) dithio]propionic acid (AEDP)-modified gold nanoparticle (Au@PLL-AEDP-FITC) probe was designed for the simple, highly sensitive intracellular GSH detection, combined with the FRET technique. In the presence of GSH, the disulfide bonds of AEDP on Au@PLL-AEDP-FITC were broken through competition with GSH, and FITC was separated from gold nanoparticles, making the fluorescence signal switch to the "turn on" state. A change in the fluorescence signal intensity has a great linear positive correlation with GSH concentration, in the linear range from 10 nM to 180 nM (R2 = 0.9948), and the limit of detection (LOD) of 3.07 nM, which was lower than other reported optical nanosensor-based methods. Au@PLL-AEDP-FITC also has great selectivity for GSH, making it promising for application in complex biological systems. The Au@PLL-AEDP-FITC probe was also successfully applied in intracellular GSH imaging in HeLa cells with confocal microscopy. In short, the Au@PLL-AEDP-FITC probe-based fluorescence-enhanced "turn-on" strategy is a sensitive, fast, and effective method for GSH detection as compared with other methods. It can be applied in complex biological systems such as cell systems, with promising biological-medical applications in the future.

Highly sensitive and selective detection and intracellular imaging of glutathione using MnO2 nanosheets assisted enhanced fluorescence of gold nanoclusters

Glutathione (GSH) plays a critical role in biological defense system and is associated with numerous human pathologies. However, it still remains a challenge for fluorescent detection of GSH over cysteine (Cys) and homocysteine (Hcy) because of their similar structures. In this work, MnO₂ nanosheets can efficiently quench the fluorescence of gold nanoclusters (Met-AuNCs) prepared by blending methionine and HAuCl₄ owing to their superior absorption capability. However, GSH can reduce MnO₂ nanosheets into Mn²⁺ which leads to the fluorescence recovery of Met-AuNCs. More intriguingly, GSH can dramatically and selectively enhance the fluorescence intensity of Met-AuNCs. Hence, a low background, ultrasensitive fluorescent detection of GSH was obtained with a detection limit of 68 nM. Moreover, the assay has been successfully used for GSH detection in human serum samples and cellular imaging with high selectivity over Cys and Hcy.

Bioinspired surfaces with wettability: biomolecule adhesion behaviors

Surface wettability plays an important role in regulating biomolecule adhesion behaviors. The biomolecule adhesion behaviors of superwettable surfaces have become an important topic as an important part of the interactions between materials and organisms. In addition to general research on the moderate wettability of surfaces, the studies of biomolecule adhesion behaviors extend to extreme wettability ranges such as superhydrophobic, superhydrophilic and slippery surfaces and attract both fundamental and practical interest. In this review, we summarize the recent studies on biomolecule adhesion behaviors on superwettable surfaces, especially superhydrophobic, superhydrophilic and slippery surfaces. The first part will focus on the influence of extreme wettability on cell adhesion behaviors. The second part will concentrate on the adhesion behaviors of biomacromolecules on superwettable surfaces including proteins and nucleic acids. Finally, the influences of wettability on small molecule adhesion behaviors on material surfaces have also been investigated. The mechanism of superwettable surfaces and their influences on biomolecule adhesion behaviors have been studied and highlighted.

A novel colorimetric and fluorometric probe for biothiols based on MnO2 NFs-Rhodamine B system

Herein, a novel bimodal ratiometric probe for sensitive and selective detection of biothiols (including glutathione (GSH), cysteine (Cys) and homocysteine (Hcys)) was constructed, which was based on the redox reaction between manganese dioxide nanoflakes (MnO₂ NFs) and rhodamine (RhB) and biothiols. When MnO₂ NFs was added into RhB solution, RhB was oxidized to a series of derivatives, accompanying with the colorimetric color changing from purple to light pink and fluorescence changing from red to green. In the presence of GSH, Cys or Hcys, they could reduce MnO₂ NFs to Mn²⁺, thereby preventing the following oxidization of RhB and the corresponding color and fluorescence changes. The absorption intensity ratio and fluorescence intensity ratio showed good linear relationships with the concentrations of biothiols. The colorimetric detection limits for GSH, Cys and Hcys were 0.057 μM, 0.140 μM and 0.087 μM, respectively. And the fluorescence detection limits were 0.177 μM, 0.282 μM and 0.161 μM. More importantly, this probe was successfully applied to monitor the concentration of GSH/Cys/Hcys in human serum samples, with satisfactory recovery. Thus, this MnO₂ NFs-RhB platform can potentially be a candidate for the detection of biothiols.

A colorimetric method to measure oxidized, reduced and total glutathione levels in erythrocytes

Background

The most important antioxidant for erythrocytes is glutathione. In this study, a non-enzymatic recycling spectrophotometric method was developed to measure oxidized and reduced glutathione (GSH) levels in erythrocytes. The newly developed method consists of two steps. In the first step, the levels of GSH were determined in the sample. Subsequently, total glutathione levels were measured by reducing the oxidized glutathione (GSSG) with sodium borohydride (NaBH4). Half of the difference between total glutathione and GSH gives the GSSG.

Results

The new method was linear between 0 and 3000 μmol/L (r2 = 0.999). The percentage recovery measured by the developed method was 100.2 ± 2.4%. The total precision of the total glutathione, GSH and GSSG was 1.26%, 1.02% and 6.65%, respectively. GSH levels were significantly lower in patients with type 2 diabetes mellitus (DM), while GSSG levels were significantly higher (p < 0.05). Hemoglobin A1c (HbA1c) levels were negatively correlated with GSH levels, whereas positively correlated with GSSG (p < 0.05).

Conclusions

In conclusion, this method is easy to apply in routine practice with high accuracy, precision and reproducibility.

A sensitive and selective electroanalysis strategy for histidine using the wettable well electrodes modified with graphene quantum dot-scaffolded melamine and copper nanocomposites

A wettable well was fabricated on an electrode, which was further modified with carbon quantum dot-scaffolded nanocomposites of melamine and copper for probing histidine through a unique displacement reaction route. The developed electrode with wettable well enables the condensing enrichment of analytes from the sample droplets, improving the electroanalytical sensitivity.

Efficient Two-Photon Fluorescent Probe for Imaging of Nitric Oxide during Endoplasmic Reticulum Stress

Nitric oxide (NO) is a vital gaseous signal molecule and plays an important role in diverse physiological and pathological processes including regulation of vascular functions. Endoplasmic reticulum (ER) stress is caused by the accumulation of misfolded or unfolded protein in the ER. Besides, ER stress induced by NO can be involved in the pathogenesis of various vascular diseases. Unfortunately, to the best of our knowledge, no ER-targeting probe for NO is reported to study the relationship between ER stress and the level of NO in a biological system. Herein, an ER-targeted fluorescent probe named ER-Nap-NO for imaging of NO is designed and synthesized. ER-Nap-NO consists of three main parts: naphthalimide (two-photon fluorophore), o-phenylenediamino (NO recognition group), and methyl sulfonamide (ER-targetable group). The probe itself is nonfluorescent because a photoinduced electron transfer (PET) process exists. After the addition of NO, the PET process is inhibited and thus strong fluorescence is released. Moreover, the response mechanism is confirmed by ¹H NMR and mass spectra and DFT calculation in detail. In addition, from the experimental results, we can conclude that the probe displays several obvious advantages including high sensitivity, selectivity, and ER-targetable ability. Based on these excellent properties, the probe is used for the two-photon imaging of exogenous and endogenous NO in ER of living cells. Most importantly, the ER-targetable probe has potential capability as a tool for investigating the level of NO during tunicamycin-induced ER stress in cells and tissues, which is beneficial for revealing the role of NO in ER-associated vascular diseases.