Rapid Capture and Hydrolysis of a Sulfur Mustard Gas in Silver-Ion-Exchanged Zeolite Y

Selective detoxification of a sulfur mustard simulant in air by a methylene blue-functionalized metal-organic framework

Efficient degradation of sulfur mustard is essential owing to its extreme toxicity and widespread use as a chemical warfare agent. However, current degradation methods often lack selectivity and generate highly toxic by-products. Herein, we demonstrate an approach for the selective photodegradation of a sulfur mustard simulant using singlet oxygen (1O2) produced by a methylene blue (MB)-modified UiO-66-(COOH)2 (UC, a classical metal-organic framework) composite, termed as MB@UC. The composite was prepared via adsorption of MB onto the surface of UC through strong electrostatic interactions. The MB@UC composite demonstrates high 1O2 generation, enabling selective detoxification of a sulfur mustard simulant (2-chloroethyl ethyl sulfide) into relatively non-toxic sulfoxide, with a half-life of 1.8 minutes under ambient conditions. Compared to traditional detoxifying agents, the MB@UC composite offers superior selectivity, rapid degradation, and excellent recyclability, maintaining its performance over multiple cycles. This work presents a promising strategy for the development of advanced heterogeneous photosensitizers for the detoxification of chemical warfare agents.

Unveiling Ru(bpy)3 2+-Encapsulated Zeolite Y as Photocatalyst: Harnessing Photocatalytic Singlet Oxygen Generation for Mustard Gas Simulant Detoxification

This study explores the encapsulation of Ru(bpy)3 2+ within Zeolite Y (ZY) to improve photocatalytic singlet oxygen generation for the degradation of a mustard gas simulant, namely 2-chloroethyl ethyl sulfide (CEES). Mustard gas simulants are known to disrupt several biological processes; thus, their effective degradation is essential. Zeolite Y, with its hierarchical structure and adjustable Si/Al ratios, is an ideal host for Ru(bpy)3 2+, significantly improving its photocatalytic efficiency and stability. It is demonstrated through XRD and spectroscopic analyses that encapsulated Ru(bpy)3 2+ maintains its structural and photophysical properties, which are essential for generating singlet oxygen. Ru(bpy)3(1.0) loaded ZY(15) (where 1.0 and 15 represent the encapsulated amount of Ru(bpy)3 2+ and Si/Al ratio, respectively) outperforms other investigated photocatalytic systems in the oxidation of CEES, demonstrating high conversion rates and selectivity toward nontoxic sulfoxide products. Immobilization of Ru(bpy)3 2+-encapsulated zeolite Y onto cotton fabric results in effective degradation of CEES. The experimental results, validated by theoretical calculations, indicate an improved oxygen affinity and accessibility in zeolites with higher Si/Al ratios. This study advances the design of photocatalytic materials for environmental and defense applications, providing sustainable solutions for hazardous chemical degradation.

Research Progress in the Degradation of Chemical Warfare Agent Simulants Using Metal-Organic Frameworks

Chemical warfare agents primarily comprise organophosphorus nerve agents, saliva alkaloids, cyanides, and mustard gas. Exposure to these agents can result in severe respiratory effects, including spasms, edema, and increased secretions leading to breathing difficulties and suffocation. Protecting public safety and national security from such threats has become an urgent priority. Porous metal-organic framework (MOF) materials have emerged as promising candidates for the degradation of chemical warfare agents due to their large surface area, tunable pore size distribution, and excellent catalytic performance. Furthermore, combining MOFs with polymers can enhance their elasticity and processability and improve their degradation performance. In this review, we summarize the literature of the past five years on MOF-based composite materials and their effectiveness in degrading chemical warfare agents. Moreover, we discuss key factors influencing their degradation efficiency, such as MOF structure, pore size, and functionalization strategies. Furthermore, we highlight recent developments in the design of MOF-polymer composites, which offer enhanced degradation performance and stability for practical applications in CWA degradation. These composite materials exhibit good performance in degrading chemical warfare agents, playing a crucial role in protecting public safety and maintaining national security. We can expect to see more breakthroughs in the application of metal-organic framework porous materials for degrading chemical warfare agents. It is hoped that these innovative materials will play a positive role in achieving social stability and security.

Boosted ability of ZIF-8 for early-stage adsorption and degradation of chemical warfare agent simulants

Efficient adsorption of hazardous substances from the environment is crucial owing to the considerable risks they pose to both humans and ecosystems. Consequently, the development of porous materials with strong adsorption capabilities for hazardous substances, such as chemical warfare agents (CWAs), is pivotal for safeguarding human lives. Specifically, the early-stage adsorption proficiency of the adsorbents plays a vital role in determining their effectiveness as ideal adsorbents. Herein, we report the efficient adsorption of CWA simulants using thermally treated ZIF-8 (T-ZIF-8). The T-ZIF-8 samples were prepared by subjecting ZIF-8 to a simple thermal treatment, which resulted in a more positive surface charge with extra open metal sites. Although the pore volume of T-ZIF-8 decreased after thermal treatment, the positive surface charge of T-ZIF-8 proved advantageous for the adsorption of the CWA simulants. As a result, the adsorption capacity of T-ZIF-8 for the CWA simulants improved compared to that of pure ZIF-8. Notably, T-ZIF-8 exhibited a remarkably enhanced adsorption ability in the early stage of exposure to the CWA simulants, possibly due to the effective polar interactions between T-ZIF-8 and the simulants via the electron-rich components within the CWA simulants. Moreover, the enhanced adsorption capacity of T-ZIF-8 led to the fast degradation of simulant compared to pure ZIF-8. T-ZIF-8 also demonstrated excellent stability over three adsorption cycles. These findings highlight that T-ZIF-8 is an outstanding material for the early-stage adsorption and degradation of CWA simulants, offering high effectiveness and stability.

Defective MOF-74 with ancillary open metal sites for the enhanced adsorption of chemical warfare agent simulants

The development of effective porous adsorbents plays a vital role in eliminating hazardous substances from the environment. Toxic chemicals, including chemical warfare agents (CWAs), pose significant risks to both humans and ecosystems, highlighting the urgency to create efficient porous adsorbents. Therefore, substantial attention has been directed towards advancing adsorption techniques for the successful eradication of CWAs from the environment. Herein, we demonstrate a rational approach for enhancing the adsorption capability of a porous metal-organic framework (MOF) by employing ancillary open metal sites within the MOF structure. To generate defective MOF-74 (D-MOF-74) with ancillary open metal sites, some of the 2,5-dihydroxy-1,4-bezenedicarboxylic acid (DHBDC) linkers originally present in the MOF-74 structure were replaced with 1,4-benzenedicarboxylic acid (BDC) linkers. The absence of hydroxyl groups in the BDC linkers compared to the original DHBDC linkers creates ancillary open metal sites, which enhance the adsorption ability of D-MOF-74 for CWA simulants such as dimethyl methyl phosphonate, 2-chloroethyl ethyl sulfide, and methyl salicylate by providing effective interaction sites for the targeted molecules. However, excessive creation of open metal sites causes the collapse of the originally well-developed MOF-74 structure, resulting in a substantial reduction in its empty space and a subsequent decline in adsorption efficiency. Thus, to produce a defective MOF with the best performance, it is necessary to replace an appropriate amount of organic linker and create suitable open metal sites. Moreover, D-MOF-74 displays excellent recyclability during consecutive adsorption cycles without losing its original structure and morphology, suggesting that D-MOF-74 is an effective and stable material for the removal of CWA simulants.

Enhanced adsorption capacity of ZIF-8 for chemical warfare agent simulants caused by its morphology and surface charge

The effective separation of toxic chemicals, including chemical warfare agents (CWAs), from the environment via adsorption is of great importance because such chemicals pose a significant threat to humans and ecosystems. To this end, the development of effective porous adsorbents for CWA removal has received significant attention. Understanding the specific interactions between adsorbents and CWAs must precede for the development of effective adsorbents. Herein, we report the relationship between the adsorption capacity of porous ZIF-8 and its morphological and surface characteristics. Four types of ZIF-8, which have different morphologies (such as cubic, rhombic dodecahedron, and leaf- and plate-shaped samples), were selectively prepared. The four types of ZIF-8 were found to have different surface charges owing to dissimilarly exposed components on the surfaces and additionally incorporated components. The specific surface charges of ZIF-8 were found to be closely related to their adsorption capacities for CWA simulants such as 2-chloroethyl ethyl sulfide (CEES) and dimethyl methyl phosphonate (DMMP). Cubic ZIF-8, with the most positive surface charge among four ZIF-8 samples, exhibited the highest adsorption capacity for CEES and DMMP via the effective polar interaction. Moreover, ZIF-8 exhibited excellent recyclability without losing its adsorption capacity and without critical morphological or structural changes.

Efficient Decontamination of HD by an Electrophilic Iodine/Carboxylate Composite as an Active Sorbent

The development of new and efficient decontamination methods has become more relevant in recent years, especially with regard to solid-based decontamination and detoxification systems. The majority of powders used today are dealing with the physical adsorption of chemical warfare agents (CWAs) and their removal from sites without actively destroying them. In this work, we have designed and developed an active solid composite matrix combining organic carboxylate salts and N-iodosuccinimide (NIS) for HD decontamination via oxidation. All the reactions and mechanistic studies for the sorption and degradation of CWAs were conducted using direct polarization and cross polarization solid-state magic-angle spinning nuclear magnetic resonance techniques. Performance toward the sorption and detoxification of HD was tested, exhibiting oxidation within minutes in a mild and selective manner to the nontoxic sulfoxide derivative followed by visible formation of iodine. The results indicate that carboxylate moieties in the matrix are important for stabilizing the positively charged sulfonium ion intermediate and for supplying oxygen for hydrolysis in a water-deficient environment. The NaOBz/NIS composite was shown to be the most efficient in sorbing and converting the water-insoluble agent HD to its nontoxic, water-soluble sulfoxide, which could then be removed from the site with mere water, resulting in less environmental damage and quick remediation.

Chitosan-Derived Porous Activated Carbon for the Removal of the Chemical Warfare Agent Simulant Dimethyl Methylphosphonate

Methods for the rapid removal of chemical warfare agents are of critical importance. In this work, a porous activated carbon material (C-PAC) was prepared from chitosan flakes via single-step potassium carbonate (K2CO3) activation for the prompt adsorption of dimethyl methylphosphonate (DMMP). C-PAC samples were prepared using different carbonization temperatures (350, 550, and 750 °C) at a constant K2CO3/chitosan ratio (1:2) and using different activator ratios (K2CO3/chitosan ratios of 1:0.5, 1:1, 1:2, and 1:3) at 750 °C. Furthermore, we evaluated the effect of preparation conditions on the adsorption capacities of the various C-PAC materials for DMMP under ambient conditions (25 °C). Notably, for the C-PAC material prepared at 750 °C using a K2CO3/chitosan ratio of 1:2, the DMMP adsorption was saturated at approximately 412 mg·g-1 carbon after 48 h. The good performance of this material makes it a potential candidate for use in remedial applications or protective gear.