Toward a Fast and Highly Responsive SnSe2-Based Photodiode by Exploiting the Mobility of the Counter Semiconductor

Pollution-free interface of 2D-MoS2/1D-CuO vdWs heterojunction for high-performance photodetector

Van der Waals heterostructures provide a new opportunity for constructing new structures and improving the performance of electronic and optoelectronic devices. However, the existing methods of constructing heterojunctions are still faced with problems such as impurity introduction, or complex preparation process and limited scope of application. Herein, a physisorption method is proposed to composite CuO nanorods on the surface of MoS2nanosheets. CuO nanorods and MoS2form type-Ⅱ heterojunctions, which promotes the separation and transport of photo-generated charge carriers. More importantly, compared with the transfer and coating methods, the physical adsorption method avoids the introduction of auxiliary materials during the whole process of constructing the heterojunction, and therefore effectively reduces the damage and pollution at the interface. The optimized MoS2/CuO heterojunction photodetector achieves a high photoresponsivity of ∼680.1 A W-1and a fast response speed of ∼29μs. The results demonstrate that the physisorption method provides a feasible approach to realize high performance photodetectors with pollution-free interfaces, and it can also be extended to the development of other low-dimensional hybrid heterojunction electronic and optoelectronic devices.

Low Power Consumption Gate-Tunable WSe2/SnSe2 Van Der Waals Tunnel Field-Effect Transistor

Two-dimensional (2D) transition-metal dichalcogenides (TMDCs) have attracted attention as promising next-generation electronic devices and sensors. In this study, we fabricated a novel nanoelectronic device based on a black-phosphorus-gated WSe2/SnSe2 van der Waals (vdW) tunnel field-effect transistor (TFET), where hexagonal boron nitride (h-BN) was used as the gate insulator. We performed morphological, electrical, and optoelectronic characterizations. The p-WSe2/n-SnSe2 heterostructure-based TFET exhibited p-type behavior with a good dependence on the gate voltage. The TFET device showed a trend toward negative differential resistance (NDR) originating from band-to-band tunneling, which can be tuned by applying a gate voltage. The optoelectronic performance of the TFET device was low, with a maximum photoresponsivity of 11 mA W−1, owing to the large device length. The results obtained herein promote the integration of black phosphorus into low-energy-consumption 2D vdW TFETs.

Ultraviolet photodetector based on p-borophene/n-ZnO heterojunction

Borophene has attracted enormous attention because of its rich and unique structural and electronic properties for promising pratical applications. Although borophene sheets have been realized on different substrates in recent experiments, there are very few reports on the device application of borophene. Recently, borophene can be grown on some functional substrates, which lays a good foundation for its potential applications. Here, we report that hydrogenated borophene can be grown on the fluorine-doped tin oxide glass substrate. The phase of the obtained borophene is well consistent with the predicted semiconductingδ₅-boron sheet. Furthermore, a vertical heterojunction ultraviolet detector based p-borophene/n-zinc oxide was fabricated. The photoresponsivity of the detector is 1.02 × 10^-1A W^-1, the specific detection rate was 1.43 × 10⁹Jones and the response speed wasτ_res = 2.8 s,τ_rec = 3.2 s at the reversed bias of -5 V under the light excitation of 365 nm. This work will lay a foundation for further study on the attractive properties and applications of borophene in new optoelectronic devices and integrated circuits.

Tin-selenide as a futuristic material: properties and applications

SnSe/SnSe2 is a promising versatile material with applications in various fields like solar cells, photodetectors, memory devices, lithium and sodium-ion batteries, gas sensing, photocatalysis, supercapacitors, topological insulators, resistive switching devices due to its optimal band gap. In this review, all possible applications of SnSe/SnSe2 have been summarized. Some of the basic properties, as well as synthesis techniques have also been outlined. This review will help the researcher to understand the properties and possible applications of tin selenide-based materials. Thus, this will help in advancing the field of tin selenide-based materials for next generation technology.

Device Architecture for Visible and Near-Infrared Photodetectors Based on Two-Dimensional SnSe2 and MoS2: A Review

While band gap and absorption coefficients are intrinsic properties of a material and determine its spectral range, response time is mainly controlled by the architecture of the device and electron/hole mobility. Further, 2D-layered materials such as transition metal dichalogenides (TMDCs) possess inherent and intriguing properties such as a layer-dependent band gap and are envisaged as alternative materials to replace conventional silicon (Si) and indium gallium arsenide (InGaAs) infrared photodetectors. The most researched 2D material is graphene with a response time between 50 and 100 ps and a responsivity of <10 mA/W across all wavelengths. Conventional Si photodiodes have a response time of about 50 ps with maximum responsivity of about 500 mA/W at 880 nm. Although the responsivity of TMDCs can reach beyond 10⁴ A/W, response times fall short by 3–6 orders of magnitude compared to graphene, commercial Si, and InGaAs photodiodes. Slow response times limit their application in devices requiring high frequency. Here, we highlight some of the recent developments made with visible and near-infrared photodetectors based on two dimensional SnSe₂ and MoS₂ materials and their performance with the main emphasis on the role played by the mobility of the constituency semiconductors to response/recovery times associated with the hetero-structures.

Substantial Improvement of the Dielectric Strength of Cellulose-Liquid Composites: Effects of Traps at the Nanoscale Interface

The dielectric strength of cellulose-liquid composites is always about several times higher than that of the cellulose paper and insulating liquids. However, this experimental phenomenon has not yet been demonstrated theoretically. Herein, the spectra characterization, molecular simulation, and wave function analysis method provide a new insight that the role of nanoscale interfacial adsorption of cellulose-liquid is exclusive for composites affecting the charge separation and producing the deep-level traps to seriously hinder electromigration under an electric field, which is responsible for the difference in dielectric strength. Meanwhile, the π conjugation and σ-π hyperconjugation effects enhance the electrical stability of aromatic hydrocarbon insulating liquids. In conclusion, interfacial trap theory can be used to explain the correlation of dielectric strength between cellulose-liquid composites and cellulose paper or dielectric liquids. It can be expected that materials with high dielectric strength can be manufactured according to the fundamental study of interfacial trap theory.

Tri-functional molecular relay to fabricate size-controlled CoOx nanoparticles and WO3 photoanode for an efficient photoelectrochemical water oxidation

Heterojunction and element doping to couple light-harvesting semiconductors with catalytic materials have been widely employed for photoelectrochemical (PEC) water splitting.