Three-Dimensional Hierarchical g-C3N4 Architectures Assembled by Ultrathin Self-Doped Nanosheets: Extremely Facile Hexamethylenetetramine Activation and Superior Photocatalytic Hydrogen Evolution

Organic pollutant degradation for micro-molecule product emission over SiO2 layers-coated g-C3N4 photocatalysts

In this study, a SiO2 layer-coated g-C3N4 catalyst was prepared by a sol-gel method to overcome the poor adsorption ability and high recombination rate of charge carriers of pristine g-C3N4. SEM and TEM images indicated that SiO2 nanoparticles were coated on the surface of g-C3N4 nanoparticles with a layered structure and the layers were tightly contacted with g-C3N4. XRD patterns, FTIR spectra, UV-vis spectra and XPS spectra revealed that the structure of g-C3N4 was not destroyed and its photoelectric catalytic properties were not suppressed by the coating of SiO2 layers. Adsorption experiments revealed that the SiO2 layers improved the adsorption performance of g-C3N4 and their ratios were adjusted. The molecular weights of the final products of the degradation of RhB and antibiotics were at the micro-molecule level while the amount of g-C3N4 reached 1.2% of the mass fraction, which were more suitable for pollutant degradation compared with those of g-C3N4 due to its poor adsorption ability. The reason for this was likely that the SiO2 layers were not only beneficial for the adsorption of pollutants and intermediate products but also for prolonging the life time of the separated electrons and holes. Finally, active trapping experiments confirmed that both the holes and superoxide radicals were the main factors in the degradation of RhB and antibiotics, with the superoxides being the most active species.

Multiple therapeutic mechanisms of pyrrolic N-rich g-C3N4 nanosheets with enzyme-like function in the tumor microenvironment

Nanozyme-based synergistic catalytic therapies for tumors have attracted extensive research attention. However, the unsatisfactory efficiency and negative impact of the tumor microenvironment (TME) hinder its clinical applications. In this study, we provide an easy method to prepare transition metals loaded onto pyrrolic nitrogen-rich g-C3N4 (PN-g-C3N4) for forming metal-N4 sites. This N-rich material effectively transfers electrons from g-C3N4 to metal-N4 sites, promotes the oxidation-reduction reaction of metals with different valence states, and improves material reusability. Under TME conditions, copper ions loaded onto PN-g-C3N4 (Cu-PN-g-C3N4, CPC) can produce ·OH through a Fenton-like reaction for tumor inhibition. This Fenton-like reaction and tumor cell inhibition can be improved further by a photodynamic effect caused by light irradiation. We introduced upconversion nanoparticles (UCNPs) into CPC to obtain nano-enzymes (UCNPs@Cu-PN-g-C3N4, UCPC) for effectively penetrating the tissue, which emits light corresponding to the UV absorption region of CPC when excited with 980 nm near-infrared (NIR) light. The nanoplatform can reduce H2O2 concentration upon exposure to NIR light; this induces an increase in dissolved oxygen content and produces a higher supply of reactive oxygen species (ROS) for destroying tumor cells. Owing to the narrow bandgap (1.92 eV) of UCPC under 980 light irradiation, even under the condition of hypoxia, the excited electrons in the conduction band can reduce insoluble O2 through a single electron transfer process, thus effectively generating O2•-. Nanoenzyme materials with catalase properties produce three types of ROS (·OH, O2•- and 1O2) when realizing chemodynamic and photodynamic therapies. An excellent therapeutic effect was established by killing cells in vitro and the tumor-inhibiting effect in vivo, proving that the prepared nanoenzymes have an effective therapeutic effect and that the endogenous synergistic treatment of multiple treatment technologies can be realized.

Boron nitride aerogels incorporated with metal nanoparticles: Multifunctional platforms for iodine capture and detection

Radioactive iodine vapors produced by nuclear fission can pose a significant risk to human health and the environment. Effective monitoring of iodine vapor leakage, capture and storage of radioactive iodine vapor are of great importance for the safety of the nuclear industry. Herein, we report a novel structure-function integrated solid iodine vapor adsorbent based on metal-modified boron nitride (BN) aerogel. Metal-modified BN aerogels incorporated with Cu/Ag nanoparticles (named as BN-Cu and BN-Ag, respectively) are successfully prepared by a metal-induced, ultrasonic-assisted, and in-situ transformation method. The metal-modified BN aerogels show improved mechanical properties in both of the maximum stress and residual deformation. Remarkably, due to the greatly enhanced "host-guest" and "guest-guest" effects by the introduction of metal nanoparticles, the BN-Cu and BN-Ag aerogels exhibit record-breaking iodine vapor adsorption capacities among inorganic adsorbents (1739.8 and 2234.13 wt% respectively), which are even higher than that of most organic adsorbents. Furthermore, an integrated iodine adsorption detection device based on metal-modified aerogels is constructed to realize real-time detection of the electrical properties of aerogels during iodine adsorption. This work provides a foundation for the development of BN aerogels as multifunctional platforms for effective iodine capture and detection. It also introduces new ideas for the use of structural-functional integrated materials in the prevention and control of radioactive iodine pollution.

Surface-assisted synthesis of biomass carbon-decorated polymer carbon nitride for efficient visible light photocatalytic hydrogen evolution

Template is frequently studied as a structure-directing agent to tune the nanomorphology of photocatalysts. However, the influences of template on the polymerization of precursors and compositions of the resulting samples are rarely considered. Herein, a biomass carbon-modified graphitic carbon nitride (CCNx) with a thin-layer morphology is synthesized via one-pot surface-assisted polymerization of melamine precursor on organic yeast. The formation of the hydrogen bond between melamine and yeast induces a strong interfacial confinement, giving rise to small-sized CCNx. In addition, the carbon materials derived from yeast dramatically broaden n → π* visible light harvesting, improve electron delocalization, and greatly enhance charge carrier separation. The optimized CCNx presents a much higher photocatalytic hydrogen production rate of 2704 μmol g^-1h^-1 under visible light irradiation (λ ≥ 420 nm), which is nearly 11-fold that of its pristine counterpart. This work realizes the synergistic effect between morphology tunning and composition tailoring by using biomass template, which shows a great potential in developing efficient metal-free photocatalysts.

Three-Dimensional Hierarchical Seaweed-Derived Carbonaceous Network with Designed g-C3N4 Nanosheets: Preparation and Mechanism Insight for 4-Nitrophenol Photoreduction

The development of g-C₃N₄-based photocatalysts with abundant active sites is of great significance for photocatalytic reactions. Herein, a smart and robust strategy was presented to fabricate three-dimensional (3D) g-C₃N₄ nanosheet-coated alginate-based hierarchical porous carbon (g-C₃N₄@HPC), including coating melamine on calcium alginate (CA) hydrogel beads, freeze-drying hydrogel beads as well as pyrolysis at high temperatures. The resulting photocatalyst possessed a significantly high surface area and a large amount of interconnected macropores compared with porous carbon without the melamine coating. The unique structural features could effectively inhibit the curling and agglomeration of g-C₃N₄ nanosheets, provide abundant photocatalytic active sites, and promote mass diffusion. Therefore, the g-C₃N₄@HPC composite exhibited remarkable photocatalytic activity and outstanding stability toward the photoreduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) by NaBH₄ under natural sunlight and simulated visible-light irradiation (λ > 420 nm) using a 300 W xenon lamp. Moreover, the mechanism toward the photocatalytic reaction was extensively studied by quenching experiments and electron spin resonance (ESR) experiments. The results showed that active hydrogen species were able to be achieved by following a dual-channel pathway in the NaBH₄ system, which included photocatalytic reduction of H⁺ ions and photocatalytic oxidation of BH₄^- ions. This work not only opens up a new way to design efficient photocatalysts for various reactions but also provides a reference for an in-depth study of the photoreduction mechanism.

Efficient bacterial inactivation with S-doped g-C3N4 nanosheets under visible light irradiation

The pathogenic bacteria in water that threatens the human health and photocatalytic disinfection have been proven to be a cost-effective and promising green technology. It is significant and necessary to develop efficient, safe, and visible light-driven photocatalysts. In this study, Escherichia coli was used as model bacterium and the disinfection performance of prepared S-doped g-C₃N₄ nanosheets (S-CNNs) under visible light was investigated. The results showed that the synergistic effects of S doping and the unique 2D structure of S-CNNs enhanced the visible light absorption, enlarged the specific surface area and reduced the recombination of photogenerated charge carriers which is beneficial for promoting the photocatalytic disinfection of the E. coli. Scavenger experiments indicated •O₂^- and h⁺ were the predominant reactive species in the photocatalytic disinfection process. In addition, the kinetics of disinfection activity were fitted by the modified Hom model and the k₂ value of S-CNNs is 0.0219 min^-1, which is much higher than that of the bulk g-C₃N₄ (CN). This work has demonstrated efficient bacterial inactivation with S-CNNs under visible light irradiation.

Template-free preparation of carbon nitride hollow spheres with adjustable sizes for photocatalytic hydrogen generation

Carbon nitride hollow spheres (CNHS) with adjustable sizes were successfully fabricated via a template-free supramolecular pre-assembly strategy, in which melamine-cyanuric acid (MCA) hollow spheres were constructed through hydrogen bonds. A feasible formation mechanism was proposed, which coupled an inside-out Ostwald ripening with the supramolecular pre-assembly process. Interestingly, the sizes of MCA could be manipulated by changing the pre-assembly temperature. Consequently, the sizes of CNHS were adjustable. The optimal CNHS exhibited excellent photocatalytic hydrogen evolution rate (98.6 μmol/h) in the visible-light region, which was approximately 11 times higher than that of bulk carbon nitride calcined by melamine. The significantly improved performance was due to the contributions including: the unique architectures with remarkable light absorption ability, high electrical conductivity, relatively narrowed band gap, fast charge separation. This work provides a facile template-free supramolecular pre-assembly strategy to fabricate carbon nitride hollow spheres with adjustable sizes for the first time.

Strategy of Graphdiyne (g-Cn H2n-2 ) Preparation Coupling with the Flower-Like NiAl-LDH Heterojunctions for Efficient Photocatalytic Hydrogen Evolution*

Graphdiyne (g-C_n H_2n-2 ), a novel two-dimension carbon allotrope material composed of a sp- and sp² -hybrid carbon network, has been widely explored since it was synthesized for the first time by Li's group in 2010. A series distinct and excellent properties bestow graphdiyne excellent performance in many fields. Here, an innovative progress for preparing graphdiyne by using Cu⁺ contained material as catalyst is reported and the composite CuI-GD is coupled with flower-like NiAl-LDH to produce H₂ from photocatalytic water splitting. The results of FTIR and Raman spectroscopy together reveal that graphdiyne nanosheets are synthesized successfully by employing a cross-coupling method. Photocatalytic hydrogen evolution performance shows that the hydrogen production activity of CuI-GD/NiAl-LDH has a 15- and 216-fold enhancement compared with CuI-GD and NiAl-LDH, respectively. A series of characterizations are carried out to expound the underlying reasons in the enhancement of the photocatalytic hydrogen production performance of CuI-GD/NiAl-LDH. Meanwhile, a possible mechanism for the photocatalytic hydrogen evolution process was proposed to understand the interaction among these materials.

Interconnected hierarchical nickel-carbon hybrids assembled by porous nanosheets for Cr(VI) reduction with formic acid

Magnetic carbon materials promise distinct advantages in the decontamination of heavy metal ions. In this work, a novel interconnected hierarchical nickel-carbon (Ni@IHC) hybrid was synthesized by combining the solvothermal method with a one-step pyrolysis under argon atmosphere. Benefitting from 3D flower-like morphology, interconnected porous nanosheets, large surface area, and abundant Ni nanoparticles, Ni@IHC hybrids can remove Cr(VI) within 25 min by using formic acid (FA) as a reductant at 25 ℃. Furthermore, the experimental parameters that can affect the material catalytic performance such as initial Cr(VI) concentration, catalyst dosage, FA concentration, and temperature were also investigated in detail. It was found that highly dispersed Ni nanoparticles contributed significantly to the reduction process. More importantly, the embedded Ni nanoparticles favor fast separation by a magnet and were helpful for the recycles use. This Ni@IHC hybrid was obtained by a facile and easy scale-up method, resulting in the fast transformation of Cr(VI) into Cr(III).

Boosting photocatalytic degradation of tetracycline under visible light over hierarchical carbon nitride microrods with carbon vacancies

Graphitic carbon nitride is considered as one of the promising photocatalysts for pollution elimination from wastewater. Manipulating the microstructure of carbon nitride remains a challengeable task, which is essential for improving light absorption, separating photogenerated carrier and creating reactive sites. Herein, a carbon vacancy modified hierarchical carbon nitride microrod (CN1.5) has been prepared templated from a melamine-NH₂OH·HCl complex. The hierarchical microrods are demonstrated to be comprised of interconnected nanosheets with rich carbon vacancies, which endows it with high specific surface area, enhanced light utilization efficiency, available reactive sites, improved charge carrier separation and numerous mass-transport channels. The resultant photocatalyst CN1.5 exhibits an excellent photodegradation efficiency of 87.9% towards tetracycline under visible light irradiation. The remarkable apparent rate constant of 4.91 × 10^-2 min^-1 is 7.3 times higher than that of bulk CN. In addition, the degradation pathways are deduced base on the observation of degradation intermediates generating in the photocatalytic process. Mechanism investigation indicates that the major contribution for photodegradation is attributed to ·O₂^-, ¹O₂ and H₂O₂ species. This work provides new insights into advancing carbon nitride's microstructure to improve photocatalytic degradation performance for highly efficient antibiotic removal and environment remediation.

Urea-induced supramolecular self-assembly strategy to synthesize wrinkled porous carbon nitride nanosheets for highly-efficient visible-light photocatalytic degradation

Graphitic carbon nitride (g-C₃N₄) has attracted immense interest as a promising photocatalyst. To facilitate its versatile applications in many fields, new low-cost strategies to synthesize outstanding g-C₃N₄ need to be further developed. Although supramolecular preorganization has been considered as a promising candidate, the utilized supramolecules like melamine–cyanuric acid (MCA) are typically synthesized by expensive triazine derivatives. Herein, wrinkled porous g-C₃N₄ nanosheets were successfully fabricated by hydrothermal-annealing of supramolecular intermediate MCA synthesized by the cheap precursors dicyandiamide and urea. During the formation of MCA, urea could act as a facile agent to react with dicyandiamide to form melamine and cyanuric acid firstly and then assemble into MCA through hydrogen bonds. In addition, urea could serve as a porogen and decompose to generate bubbles for conducive formation of micro-size MCA self-templates and thus wrinkled porous g-C₃N₄ nanosheets could be obtained. The nanostructure and photocatalytic performance of g-C₃N₄ were optimized by modulating microstructures and physicochemical properties of MCA, which could be conveniently controlled by urea addition and hydrothermal duration. The obtained wrinkled porous g-C₃N₄ nanosheets exhibit highly-efficient visible-light photocatalytic degradation compared with traditional MCA-derived g-C₃N₄, which could remove 98.3% of the rhodamine B in 25 min. The superior photocatalytic activity is mainly attributed to the urea-induced larger specific surface area, better light harvesting ability, faster transfer and more advanced separation efficiency of the photogenerated electron–hole pairs. This research provides a new strategy for preparing high-performance porous g-C₃N₄ from the self-assembled supramolecule MCA synthesized by low-cost precursors.

Wrinkled porous g-C₃N₄ nanosheets were fabricated by supramolecular MCA self-templates. Due to the reactant and porogen agent urea, g-C₃N₄ could be modulated with efficient electron–hole pairs and thus superior photocatalytic degradation performance.

Whether planar or corrugated graphitic carbon nitride combined with titanium dioxide exhibits better photocatalytic performance?

The density functional theory method was performed to study the electronic structures of planar (pGN), corrugated (cGN) graphitic carbon nitride and their interactions with titanium dioxide cluster (TiO₂)₇. The transfer of photoinduced electrons was analyzed and electronic excitations were calculated. The obtained results show that cGN is thermodynamically more stable than pGN. cGN chemically interacts with titanium dioxide clusters, while the interaction between pGN and the cluster is assigned to physical nature. The combination of cGN and pGN with (TiO₂)₇ reduces the energy of the first excited states compared to that of the pure substances. The photocatalytic activities were estimated based on hypotheses on the location of the reduction and oxidation sites, the distance between the photoinduced holes and electrons and the electron density of molecular orbitals involved in the excitation. cGN/TiO₂ is predicted to have a higher photocatalytic activity than pGN/TiO₂.

Superior sponge-like carbon self-doping graphitic carbon nitride nanosheets derived from supramolecular pre-assembly of a melamine-cyanuric acid complex for photocatalytic H2 evolution

The photocatalytic evolution of hydrogen (H₂) from water splitting is considered a promising route to overcome the energy crisis, and the key lies in the preparation of efficient photocatalysts. Herein, superior ordered sponge-like carbon self-doped graphitic carbon nitride (g-C₃N₄) nanosheets (SCCNS) were prepared via a combined strategy of melamine-cyanuric acid complex supramolecular pre-assembly and solvothermal pre-treatment using ethylene glycol (EG) aqueous solutions (EG:water = 50:50 vol.%) as a solvent and carbon doping source. The following pyrolysis converts the naturally arranged melamine-EG-cyanuric acid supramolecular intermediates to highly crystalline SCCNS with large specific surface areas. The optimal SCCNS-180 exhibits superior photocatalytic H₂ evolution activities (∼4393 and 11 320 μmol h^-1 g^-1) when irradiated with visible light and simulated sunlight; these values are up to ∼17- and ∼18-fold higher than that of bulk g-C₃N₄. The quantum efficiency of SCCNS-180 at λ = 420 nm can reach 6.0%. The excellent photocatalytic performance of SCCNS-180 derives from its distinct ordered sponge-like nanosheet structure with highly crystallinity and the carbon doping, leading to its improved optical absorption, accelerated photoinduced electron-hole pair transfer and separation rate and enlarged specific surface area (134.4 m² g^-1).

Facile one-pot synthesis of defect-engineered step-scheme WO3/g-C3N4 heterojunctions for efficient photocatalytic hydrogen production

Defect-engineered step-scheme WO₃/g-C₃N₄ heterojunctions synthesized by a facile one-pot method greatly improve the photocatalytic activity for hydrogen evolution.

Constructing CeO2/nitrogen-doped carbon quantum dot/g-C3N4 heterojunction photocatalysts for highly efficient visible light photocatalysis

Ternary CeO₂/nitrogen-doped carbon quantum dot (NCQD)/graphitic carbon nitride (g-C₃N₄) heterojunction nanocomposites were prepared by a high-temperature calcination and hydrothermal method and tested for degrading tetracycline (TC) and generating H₂. Compared with CeO₂ and g-C₃N₄, the Z-scheme CeO₂/NCQDs/g-C₃N₄ (CSNx, where x represents the amount of CeO₂ in wt%) nanoparticles showed a higher TC photodegradation capacity and H₂ evolution ability owing to enhanced efficient charge separation and photocatalytic stability. CSN5 showed the best photodegradation activity for TC degradation (100 mL, 20 mg L^-1; 100% degradation in 60 min; λ≥ 420 nm) and the highest H₂ evolution rate of 1275.42 μmol h^-1 g^-1 was approximately 3.73- and 32.25-times higher than those of pristine g-C₃N₄ (341.85 μmol h^-1 g^-1) and pure CeO₂ (39.55 μmol h^-1 g^-1), respectively. Superoxide (˙O₂^-) and hydroxyl (˙OH) radicals were also confirmed to be formed on the sample surface for TC photocatalytic degradation. As an electronic medium, NCQDs transferred electrons between the g-C₃N₄ and CeO₂ interface to promote the electron-hole separation. This work affords a helpful perspective for synthesizing efficient charge separation and environmentally friendly photocatalysts by controlling the surface heterostructure.

Facile Construction of a Copper-Containing Covalent Bond for Peroxymonosulfate Activation: Efficient Redox Behavior of Copper Species via Electron Transfer Regulation

Heterogeneous catalysis can be enhanced through the construction of effective atom connection for rapid electron transport on the catalyst surface. Hence, this study proposed a new strategy for electron transfer regulation to facilitate redox cycle of Cu(II)/Cu(I). The objective was achieved by successful construction of copper-containing covalent bond through the in situ growth of porous g-C₃N₄ with oxygen dopants and nitrogen defects (O-CN_D) on CuAl_xO_y substrate (CuAl@O-CN_D). On the basis of X-ray absorption fine structure (XAFS) and other characterization results, the facilitated redox behavior of copper species by electron transfer regulation was ascribed to the formation of a C-O-Cu bond on the porous-rich superficial of the catalyst; these covalent C-O-Cu bonds shortened the migration distance of electrons between Cu(II) and Cu(I) via Cu(I)-O-C-O-Cu(II) bridge. The construction of copper-containing covalent bonds in the catalyst resulted in efficient PMS activation for a rapid redox cycle of Cu(II)/Cu(I), triggering a series of reactions involving the continuous production of three highly active species (SO₄^·-, ^·OH and ¹O₂). The rapid diffusion and transportation of the generated active species from porous structures directly attack typical pharmaceutically active compounds (PhACs), achieving superior catalytic performance. This study provides a new routine to construct a C-O-Cu bond for PMS activation by regulating the electron transfer to accelerate the redox behavior of copper species for environmental remediation.

Graphitic Carbon Nitride (g-C3N4)-Derived Bamboo-Like Carbon Nanotubes/Co Nanoparticles Hybrids for Highly Efficient Electrocatalytic Oxygen Reduction

The oxygen reduction reaction (ORR) is an extremely important reaction in many renewable energy-related devices. The sluggish kinetics of the ORR limits the development of many fuel cells. Design and synthesis of highly efficient nonprecious electrocatalysts are of vital importance for electrochemical reduction of oxygen. Herein, we develop a graphitic carbon nitride (g-C₃N₄)-derived bamboo-like carbon nanotubes/carbon-wrapped Co nanoparticles (BCNT/Co) electrocatalyst by a simple high-temperature pyrolysis and acid-leaching method. The catalytic performance of the as-designed electrocatalyst toward ORR outperforms the commercial Pt/C catalyst in alkaline solution. The onset potential of nonprecious BCNT/Co-800 catalyst was 1.12 V. The half-wave potential was 0.881 V. The result was superior to that of commercial Pt/C (0.827 V vs RHE). The Co nanoparticles, bamboo-like carbon nanotubes, defects, and Co-N_x active sites all result in the remarkable ORR activity, stability, and great methanol tolerance.

Facile strategy for the fabrication of noble metal/ZnS composites with enhanced photocatalytic activities

The introduction of noble metal nanoparticles to photocatalysts can effectively improve the separation efficiency of the photogenerated electron–holes. Therefore, noble metal/ZnS composites were synthesized using a low-temperature solid-phase chemical method with sodium borohydride as the reducing agent. The characterization results showed that the noble metal/ZnS composites have been successfully obtained and that the noble metals were distributed on the surface of ZnS. The catalytic results suggested that the composites exhibited improved activity after introduction of noble metals, which can be attributed to the rapid migration of carriers and the enhancement of the light absorption, mainly owing to the tight combination between the ZnS and noble metals and the plasmon resonance effect of the noble metals. The catalytic mechanism was explored by using photoluminescence spectroscopy, photocurrent spectra, valence band X-ray photoelectron spectroscopy (XPS-VB) spectra and capture agent experiments, and a possible mechanism was proposed. This work provides a new strategy for the high-volume synthesis of noble metal-based composite photocatalysts, which could be helpful for sustainable development.

The introduction of noble metal nanoparticles to photocatalysts can effectively improve the separation efficiency of the photogenerated electron–holes.

Surface defect-abundant one-dimensional graphitic carbon nitride nanorods boost photocatalytic nitrogen fixation

Defective g-C₃N₄ nanorods enable to boots the adsorption and cleavage of N₂ molecules to achieve higher photocatalytic nitrogen fixation performance.

Graphitic carbon nitride-based materials for photocatalytic reduction of U(vi)

This work reports the photocatalytic reduction of U(vi) using g-C₃N₄-based materials and discusses the factors affecting the photocatalytic reduction of U(vi).

An energy band compactable B-rGO/PbTiO3 p-n junction: a highly dynamic and durable photocatalyst for enhanced photocatalytic H2 evolution

Reduced graphene oxide (rGO) intentionally doped with boron atoms is a promising tactic to extract bandgap energy and p-type semiconducting behavior from graphene-based materials. Moreover, the integration of p-type boron-doped rGO with an n-type material through a heterojunction interface exhibits complementary properties to restrict the fast recombination of charge carriers and enhance the photoreaction towards energy applications. Herein, we have prepared boron-doped rGO/PbTiO3 p-n heterojunctions via a hydrothermal method. The successful formation of an excellent p-n heterojunction was demonstrated by TEM, XPS and Raman analysis. The constructed boron-doped rGO/PbTiO3 p-n heterojunctions exhibit dramatic increases in photoelectrochemical and photocatalytic performance due to the presence of a space charge region at the interface of the two materials. The scenario also revealed the double-edge sword functions of B-rGO: the material itself (i) acts as a visible light active photocatalyst with a band gap energy of 2.7 eV and (ii) participates in enhanced charge transfer via the band edge alignment between B-rGO and PbTiO3, as elucidated from photoluminescence and electrochemical impedance studies. Furthermore, the optimal 2B-rGO/PT p-n heterojunction possesses outstanding repeatability and exhibited the highest rate of hydrogen evolution, i.e. 293.79 μmol h-1 under visible light irradiation. The results for these materials may provide advanced insight into the design of next-generation high-efficiency black graphene-based heterojunctions.

Facile synthesis of GO and g-C3N4 nanosheets encapsulated magnetite ternary nanocomposite for superior photocatalytic degradation of phenol

In this study, the synthesis of Fe₃O₄@GO@g-C₃N₄ ternary nanocomposite for enhanced photocatalytic degradation of phenol has been investigated. The surface modification of Fe₃O₄ was performed through layer-by-layer electrostatic deposition meanwhile the heterojunction structure of ternary nanocomposite was obtained through sonicated assisted hydrothermal method. The photocatalysts were characterized for their crystallinity, surface morphology, chemical functionalities, and band gap energy. The Fe₃O₄@GO@g-C₃N₄ ternary nanocomposite achieved phenol degradation of ∼97%, which was significantly higher than that of Fe₃O₄@GO (∼75%) and Fe₃O₄ (∼62%). The enhanced photoactivity was due to the efficient charge carrier separation and desired band structure. The photocatalytic performance was further enhanced with the addition of hydrogen peroxide, in which phenol degradation up to 100% was achieved in 2 h irradiation time. The findings revealed that operating parameters have significant influences on the photocatalytic activities. It was found that lower phenol concentration promoted higher activity. In this study, 0.3 g of Fe₃O₄@GO@g-C₃N₄ was found to be the optimized photocatalyst for phenol degradation. At the optimized condition, the reaction rate constant was reported as 6.96 × 10^-3 min^-1. The ternary photocatalyst showed excellent recyclability in three consecutive cycles, which confirmed the stability of this ternary nanocomposite for degradation applications.

Ag-Bridged Z-Scheme 2D/2D Bi5FeTi3O15/g-C3N4 Heterojunction for Enhanced Photocatalysis: Mediator-Induced Interfacial Charge Transfer and Mechanism Insights

Heterojunction photocatalysts have attracted widespread interest in photocatalysis because of their high-efficiency interfacial charge-transfer characteristics of nanoarchitectures. In this study, Ag-bridged 2D/2D Bi₅FeTi₃O₁₅/ultrathin g-C₃N₄ Z-scheme heterojunction photocatalysts with powerful interfacial charge transfer has been synthesized via a facile ultrasound method coupled with a photoreduction strategy for efficient photocatalytic degradation of antibiotics. The morphology analysis displays that the bridged Ag nanoparticles were anchored on the interface of layered Bi₅FeTi₃O₁₅ and ultrathin g-C₃N₄ nanosheets. Owing to its unique 2D/2D ternary heterostructure, the Bi₅FeTi₃O₁₅/2%Ag/10% ultrathin g-C₃N₄ composite exhibited the best tetracycline degradation performance under visible-light and simulated solar irradiation. Meanwhile, the intermediates and degradation pathways were proposed by a liquid-phase mass spectrometry system. Characterizations and density functional theory studies together verify that the matched band structure of Bi₅FeTi₃O₁₅ and g-C₃N₄ could induce a superfast Z-scheme interfacial charge-transfer path. More importantly, bridged Ag nanoparticles in the 2D/2D heterojunction extended the light absorption range and prolonged the lifetime of photogenerated electron-holes induced by Bi₅FeTi₃O₁₅. This work affords a promising approach for designing multicomponent Z-scheme heterojunction photocatalysts for highly efficient photocatalytic application.

Amorphous Bimetallic Cobalt Nickel Sulfide Cocatalysts for Significantly Boosting Photocatalytic Hydrogen Evolution Performance of Graphitic Carbon Nitride: Efficient Interfacial Charge Transfer

Noble metals usually work as the cocatalyst for photocatalytic water splitting, but their rare and expensive properties narrowed their wide development. Transition-metal sulfides have appeared to be promising non-noble metal cocatalysts in the hydrogen evolution reaction (HER) to meet future energy demands. Meanwhile, many studies focus on the fabrication of bimetallic catalysts because of their remarkably superior catalytic activity compared with monometallic substances. Herein, amorphous bimetallic cobalt nickel sulfide (CoNiS_x) was fabricated to work as a cocatalyst in the photocatalytic H₂ evolution reaction, which can couple with pristine graphitic carbon nitride (g-C₃N₄). CoNiS_x-CN exhibits a larger specific surface area compared with g-C₃N₄, making it possess more reaction active sites. Moreover, the contacted interface in the CoNiS_x-CN composite photocatalyst contributes to higher separation efficiency of photogenerated carriers, which was proved by experimental and theoretical calculations. More importantly, the theoretical calculation also verified that CoNiS_x-CN has relatively closer Gibbs free energy to zero than pure g-C₃N₄ and corresponding monometallic cocatalyzed g-C₃N₄. Therefore, the prepared CoNiS_x-CN composite exhibited a dramatic photocatalytic HER performance of 2.366 μmol mg^-1 h^-1, which is about 76-fold higher in comparison with pristine g-C₃N₄ and comparable to g-C₃N₄ with Pt as a cocatalyst under 420 nm light irradiation. This study reveals a promising and efficient bimetallic cocatalyst for the photocatalytic H₂ evolution reaction.

Efficient, Full Spectrum-Driven H2 Evolution Z-Scheme Co2P/CdS Photocatalysts with Co-S Bonds

Exploring high-efficiency, low-cost, and stable photocatalysts that enable full solar spectrum including UV, visible, and near-infrared (NIR) light utilization for photocatalytic hydrogen generation still faces huge challenge. Herein, a Co₂P/CdS Z-scheme photocatalyst without a noble metal is rationally fabricated to achieve ultrabroad UV-vis-NIR harvesting. Compared to Pt/CdS, CdS, and Co₂P, the optimized Co₂P/CdS exhibits much more outstanding performance with the H₂ generation rates of 262.16, 66.98, and 3.93 mmol/g/h under solar, visible (780 nm > λ > 420 nm), and NIR (λ > 780 nm) light, respectively. Particularly, 10% Co₂P/CdS displays a prominent apparent quantum efficiency value of 2.26% at 700 nm. The Z-scheme transform route can effectively enhance the separation of charge carriers in Co₂P/CdS for UV-vis-driven HER, as confirmed by photoluminescence and photoelectrochemical measurements. More importantly, the Co-S bonds at the interface demonstrated by Fourier transform infrared, Raman (mapping), and X-ray photoelectron spectroscopy and density functional theory calculations can act as a "bridge" for charge transfer, thereby enhancing the full spectrum-driven H₂ evolution. To the best of our knowledge, this is a rare research on full spectrum-driven photocatalytic HER without a noble metal.

Enhanced photocatalytic degradation of methyl orange by porous graphene/ZnO nanocomposite

Degrading aquatic organic pollutants efficiently is very important but strongly relied on the design of photocatalysts. Porous graphene could increase photocatalytic performance of ZnO nanoparticles by promoting the effective charge separation of electron-hole pairs if they can be composited. Herein, porous graphene, ZnO nanoparticles and porous graphene/ZnO nanocomposite were prepared by fine tuning of partial combustion, which graphene oxide imperfectly covered by the layered Zn salt was combusted under muffle furnace within few minutes. Resulting ZnO nanoparticles (32-72 nm) are dispersed uniformly on the surface of graphene sheets, the pore sizes of porous graphene are in the range from ∼3 to ∼52 nm. The synthesized porous graphene/ZnO nanocomposite was confirmed to show enhanced efficiency under natural sunlight irradiation compared with pure ZnO nanoparticles. Using porous graphene/ZnO nanocomposite, 100% degradation of methyl orange can be achieved within 150 min. The synergetic effect of photocatalysis and adsorption is main reason for excellent MO degradation of PG/ZnO nanocomposite. This work may offer a new route to accurately prepare porous graphene-based nanocomposite and open a door of their applications.

AgxH3−xPMo12O40/Ag nanorods/g-C3N4 1D/2D Z-scheme heterojunction for highly efficient visible-light photocatalysis

Synergism of light absorption, 1D/2D structure, good interface contact, and Z-scheme endowed the Ag_xH_3−xPMo₁₂O₄₀/Ag/C₃N₄ composite with excellent performance.