Coupling Ultrafine Pt Nanocrystals over the Fe2P Surface as a Robust Catalyst for Alcohol Fuel Electro-Oxidation

An advanced Ru-based alkaline HER electrocatalyst benefiting from Volmer-step promoting 5d and 3d co-catalysts

In this study, a trimetallic catalyst, NiWRu@NF, is electrodeposited onto nickel foam using chronoamperometry to enhance the hydrogen evolution reaction (HER) in alkaline water electrolysis. The catalyst combines nickel, tungsten, and ruthenium components, strategically designed for efficiency and cost-effectiveness, hydroxyl transfer and water dissociation, and acceleration of hydrogen combination, respectively. Evaluation of NiWRu@NF reveals exceptional performance, with a low overpotential of -50 mV and high current density of -10 mA cm-2, signifying its efficiency in promoting HER. Tafel values further corroborate the catalyst's effectiveness, indicating a rapid reaction rate of hydrogen evolution in such a highly alkaline medium compared to other controls studied along with it. This study underscores the significance of NiWRu@NF in advancing alkaline HER kinetics, paving the way for more efficient electrolysis processes.

Optimizing Intermediate Adsorption on Pt Sites via Triple-Phase Interface Electronic Exchange for Methanol Oxidation

For the most commonly applied platinum-based catalysts of direct methanol fuel cells, the adsorption ability toward reaction intermediates, including CO and OH, plays a vital role in their catalytic activity and antipoisoning in anodic methanol oxidation reaction (MOR). Herein, guided by a theoretical mechanism study, a favorable modulation of the electronic structure and intermediate adsorption energetics for Pt active sites is achieved by constructing the triple-phase interfacial structure between tin oxide (SnO2), platinum (Pt), and nitrogen-doped graphene (NG). From the strong electronic exchange at the triple-phase interface, the adsorption ability toward MOR reaction intermediates on Pt sites could be efficiently optimized, which not only inhibits the adsorption of CO* on active sites but also facilitates the adsorption of OH* to strip the poisoning species from the catalyst surface. Accordingly, the resulting catalyst delivers excellent catalytic activity and antipoisoning ability for MOR catalysis. The mass activity reaches 1098 mA mg-1Pt, 3.23 times of commercial Pt/C. Meanwhile, the initial potentials and main peak for CO oxidation are also located at a much lower potential (0.51 and 0.74 V) against commercial Pt/C (0.83 and 0.89 V).

Oxygen vacancy modulation in interfacial engineering Fe3O4 over carbon nanofiber boosting ambient electrocatalytic N2 reduction

The oxygen vacancy modulation of interface-engineered Fe3O4 nanograins over carbon nanofiber (Fe@CNF) was achieved to improve electrocatalytic nitrogen reduction reaction (NRR) activity and stability via facile electrospinning and tuning thermal procedure. The optimal catalyst calcined at 800 ℃ (Fe@CNF-800) was endowed with abundant nanograin boundaries and optimized oxygen vacancy (Vo) concentration of iron oxides, thereby affording 37.1 μg h-1 mgcat.-1 (-0.2 V vs. reversible hydrogen electrode (RHE)) NH3 yield and rational Faraday efficiency (10.2%), with 13.6 times atomic activity enhancement compared to of that commercial Fe3O4. The interfacial effect of assembled nanograins in particles correlated with the formation of Vo and more intrinsic active sites, which is conducive to the trapping and activation of nitrogen (N2). The in-situ X-ray photoelectron spectroscopy (XPS) measurement revealed the real consumption of adsorbed oxygen when introducing N2 by the trapping effect of Vo. Density-Functional-Theory (DFT) calculation validates the promotive hydrogenation effect and elimination of hydrogen intermediate (H*) interacted with N2 transferring toward oxygen of the support. The optimal catalyst shows a lasting NRR activity at least 90 h, outperforming most reported Fe-based NRR catalysts.

One-pot synthesis of ultrafine trimetallic PtPdCu alloy nanoparticles decorated on carbon nanotubes for bifunctional catalysis of ethanol oxidation and oxygen reduction

Bifunctional catalysts for ethanol oxidation reaction (EOR) and oxygen reduction reaction (ORR) with high noble-metal utilization are highly beneficial to direct ethanol fuel cells (DEFCs). This study developed a ternary bifunctional catalyst composed of ultrafine PtPdCu alloy nanoparticles and carbon nanotubes (CNTs) support through a facile surfactant-free solvothermal route. The carboxyl terminal groups on CNTs ensure the confined growth of PtPdCu alloys (∼5 nm) and suppress Ostwald ripening of metallic active sites during electrochemical cycling. Consequently, PtPdCu/CNTs exhibits high mass activity (1.95 A mg^-1) and specific activity (4.08 mA cm^-2) toward EOR, which are 7.8 and 8.9 times higher, respectively, than those of commercial Pt/C. Furthermore, PtPdCu/CNTs displays superior stability toward EOR compared with its bimetallic counterparts (PtPd/CNTs and PtCu/CNTs). In addition, PtPdCu/CNTs exhibits the highest half-wave potential of 0.888 V among all electrocatalysts, indicating high ORR activity. Density functional theory calculations reveal that Pd and Cu mediate the electronic structure of Pt, leading to enhanced catalytic activity of PtPdCu/CNTs. The excellent catalytic property of PtPdCu/CNTs can also be attributed to the bifunctional effects of Pd/Cu and the interaction between metal and the carbon support. The proposed material is a contribution to the family of efficient ternary-alloy electrocatalysts for fuel cells.

Glycerol Electro-Oxidation in Alkaline Medium with Pt-Fe/C Electrocatalysts Synthesized by the Polyol Method: Increased Selectivity and Activity Provided by Less Expensive Catalysts

We have investigated platinum catalysts containing iron as a modifier to obtain catalysts with superior electrocatalytic activity toward glycerol electro-oxidation in an alkaline medium. The electrocatalysts, supported on carbon Vulcan, were synthesized by the polyol method. The physicochemical characterization data showed that the metals were well distributed on the carbon support and had small particle size (2 nm). The Pt:Fe metal ratio differed from the nominal composition, indicating that reducing iron with platinum was difficult, even though some parameters of the synthesis process were changed. Electrochemical analyses revealed that PtFe/C was more active and stable than commercial Pt/C was, and analysis of the electrolysis by-products showed that iron addition to Pt/C boosted the glycerol conversion and selectivity for glyceric acid formation.

Boosting the Electrocatalytic Formic Acid Oxidation Activity via P-PdAuAg Quaternary Alloying

Direct formic acid fuel cells (DFAFCs) are considered promising sustainable power sources due to their high energy density, nonflammability, and low fuel crossover. However, serious CO poisoning and activity attenuation of the anodic formic acid oxidation reaction (FAOR) greatly restrict the output and durability of DFAFCs. Inspired by the specific relationship between the composition, type, and property of alloys, in this work, we synthesize a series of hybrid substitutional/interstitial quaternary alloys P-PdAuAg by means of a novel polyphosphide route to address these issues. Due to the simultaneous interstitial P-doping and metal (Au, Ag, Pd) co-reduction, the P-PdAuAg quaternary alloy obtained is only 3 nm in diameter with abundant defects. It not only achieves a new high mass activity of 8.08 A mg_Pd^-1 (6.78 A mg_catalyst^-1) but also maintains high stability in the high potential range and harsh reaction conditions. Both the activity and anti-poisoning ability are far exceeding those of the currently reported FAOR catalysts. Detailed density functional theory (DFT) calculations reveal that the superb electrochemical performances originate from the shift of the d-band center of Pd as a result of the synergistic electronic/ligand effects between Pd, Au, Ag, and P. The introduction of interstitial P inhibits the occurrence of an indirect reaction pathway on Pd, while Au and Ag suppress the adsorption of CO and optimize the sequential dehydrogenation steps, leading to boosted reaction kinetics and CO tolerance. This work pioneered a facile way for the synthesis of Pd-based substitutional/interstitial hybrid alloys, providing a promising means of further improving the performance of alloying catalysts.

ZIF-67-derived CoP/NC effectively supported Pt nanoparticles for methanol oxidation reaction

Metal-support interaction plays an important role in the catalysis reaction, and an effective support is highly desired in the hybrid catalyst construction. Herein, we demonstrated an effective catalyst system by coupling Pt nanoparticles over the ZIF-67-derived CoP/NC support for methanol oxidation reaction (MOR) in acidic and alkaline solutions. The results indicated that the Pt-CoP/NC catalyst showed high catalytic activity and stability for MOR owing to the oxophilic properties of CoP and the strong metal-support interaction, as well supported by the electrochemical measurements and the spectroscopic analysis, which far exceeded that of the Pt-Co/NC and commercial Pt/C catalysts. Specifically, the forward peak current density of the Pt-CoP/NC catalyst was 74.2 mA cm^-2 for MOR in an acidic electrolyte, which was 2.2 times higher than that of a commercial Pt/C catalyst. Further, in an alkaline electrolyte, the Pt-CoP/NC catalyst showed the highest forward peak current density of 118.6 mA cm^-2, which was 4.5 times higher than that of a commercial Pt/C catalyst. High catalytic kinetics and stability for MOR were also carefully discussed. Moreover, the Pt-CoP/NC catalyst exhibited excellent anti-poisoning ability in comparison to the Pt-Co/NC and commercial Pt/C catalysts with the help of the CO-stripping technique. The current work would be instructive for high-performance catalyst system construction based on the ZIF-67-derived CoP/NC support.

PtFeCoNiCu high-entropy solid solution alloy as highly efficient electrocatalyst for the oxygen reduction reaction

Searching for an efficient, durable, and low cost catalyst toward oxygen reduction reaction (ORR) is of paramount importance for the application of fuel cell technology. Herein, PtFeCoNiCu high-entropy alloy nanoparticles (PFCNC-HEA) is reported as electrocatalyst toward ORR. It shows remarkable ORR catalytic mass activity of 1.738 A mg^-1 _Pt at 0.90 V, which is 15.8 times higher than that of the state-of-art commercial Pt/C catalyst. It also exhibits outstanding stability with negligible voltage decay (3 mV) after 10k cycles accelerated durability test. High ORR activity is ascribed to the ligand effect caused by polymetallic elements, the optimization of the surface electronic structure, and the formation of multiple active sites on the surface. In the proton exchange membrane fuel cell setup, this cell delivers a power density of up to 1.380 W cm^-2 with a cathodic Pt loading of 0.03 mg_Pt cm^-2, demonstrating a promising catalyst design direction for highly efficient ORR.

Recent advances in fuel cell reaction electrocatalysis based on porous noble metal nanocatalysts

As the center of fuel cells, electrocatalysts play a crucial role in determining the conversion efficiency from chemical energy to electrical energy. Therefore, the development of advanced electrocatalysts with both high activity and stability is significant but challenging. Active site, mass transport, and charge transfer are three central factors influencing the catalytic performance of electrocatalysts. Endowed with rich available surface active sites, facilitated electron transfer and mass diffusion channels, and highly active components, porous noble metal nanomaterials are widely considered as promising electrocatalysts toward fuel cell-related reactions. The past decade has witnessed great achievements in the design and fabrication of advanced porous noble metal nanocatalysts in the field of electrocatalytic fuel oxidation reaction (FOR) and oxygen reduction reaction (ORR). Herein, the recent research advances regarding porous noble metal nanocatalysts for fuel cell-related reactions are reviewed. In the discussions, the inherent structural features of porous noble metal nanostructures for electrocatalytic reactions, advanced synthetic strategies for the fabrication of porous noble metal nanostructures, and the structure-performance relationships are also provided.

One-pot synthesis of porous Pd-polypyrrole/nitrogen-doped graphene nanocomposite as highly efficient catalyst for electrooxidation of alcohols

Herein, a ternary-nanocomposite Pd-polypyrrole/nitrogen-doped graphene (Pd-PPy/NGE) has been prepared facilely by the one-pot method. In simple terms, PPy was in-situ polymerized on the surface of NGE with PdCl₄^2- as the oxidant, and simultaneously Pd nanopaticles were loaded on the surface of PPy or embedded in PPy particles. The obtained Pd-PPy/NGE nanocomposite exhibits promising electrocatalytic properties toward the oxidation reaction of alcohols in alkaline medium. Especially, the optimized Pd-PPy/NGE (1:50) catalyst possesses mass activity of 2176.7, 1192.7 and 498.9 mA mg_Pd^-1 toward ethylene glycol, methanol and ethanol electrooxidation, respectively, which are 4.3, 6.7 and 2.9 times of those for commercial Pd/C catalyst. Moreover, the Pd-PPy/NGE (1:50) also shows higher anti-poisoning ability and operating stability than the Pd/C catalyst. The promising electrocatalytic performance of the Pd-PPy/NGE (1:50) for alcohols oxidation can be ascribed to the well dispersion of Pd nanoparticles, the porous and stable three dimentional structure of the composite, and the synergistic effect between different components. The structural randomness of the conducting polymer and the potential synergistic effect between the metal nanoparticles and various supports would provide broad development space for these composites as electrocatalysts in direct alcohol fuel cell.

Boosting the anti-poisoning ability of palladium towards electrocatalytic formic acid oxidation via polyphosphide chemistry

In this work, we reported a novel polyphosphide strategy for the synthesis of phosphorus doped Pd (P-Pd) using red phosphorus as the starting material at quasi-ambient conditions. Polyphophide anions, as the key reaction intermediates, served as the reducing agent and phosphorus source to modulate the surface electronic structure of Pd. The P-Pd obtained exhibited topmost CO tolerance and electrocatalytic activity to formic acid oxidation among the state-of-arts reports. The mass activity and turnover frequency of P-Pd reached 4413 mA mg^-1_Pd and 16.04 s^-1 at 0.8 V, which were 23.7 and 6.4 times that of commercial Pd/C respectively. After 1000 repeated cycles, 82% initial activity was reserved. Combined with the electrochemical analysis and the density functional theory calculation, the boosted electrochemical performances can be attributed to the size and electronic effects induced by the P doping, which increase the surface actives sites, inhibit the adsorption of CO and change the reaction pathway to favorable CO₂ route. A full cell was also assembled to demonstrate the practical potential of the P-Pd, which showed a maximum power density of 21.56 mW cm^-2. This polyphophide-based reaction route provides a new strategy for the preparation of efficient and durable phosphorus doped alloys for electrocatalysis.

Accurately manipulating hierarchical flower-like Fe2P@CoP@nitrogen-doped carbon spheres as an efficient carrier material of Pt-based catalyst

Fabrication of hierarchical porous catalysts with a large specific surface area and tunable architecture provides an effective strategy to promote the catalytic performance of Pt-based catalysts. Herein, we design and construct hierarchical flower-like Fe₂P@CoP@nitrogen-doped carbon (Fe₂P@CoP@NDC) through a facile method, and synthesize Pt/Fe₂P@CoP@NDC porous spheres via acid pickling and depositing of Pt NPs. The morphology of Fe₂P@CoP@NDC is precisely manipulated by controlling the synthesis conditions, including the reaction time and the addition of a protective agent, and the protective growth mechanism of the hierarchical flower-like Fe₂P@CoP@NDC spheres is mentioned. Significantly, the Pt/Fe₂P@CoP@NDC catalyst exhibits 3.29 and 2.36 times higher mass activity and specific activity than those of commercial Pt/C for methanol oxidation, respectively. Furthermore, its residual mass activity after 1000 cycles is 5.77 times as much as that of the commercial Pt/C catalyst in acidic electrolytes. Based on exploration of the reaction kinetics of the Pt/Fe₂P@CoP@NDC catalyst, the excellent catalytic activity and durability are attributed to the unique porous structure with relatively open area and enlarged specific surface area, which can promote fast electron transport and charge transfer, resulting in quick reaction kinetics. Moreover, metal phosphides can effectively accelerate the oxidative removal of intermediates, accordingly improving the catalytic activity. Therefore, the Pt/Fe₂P@CoP@NDC material with these compositional and structural features is expected to be a promising electrochemical catalyst.

Tunable Assembly of Protein Enables Fabrication of Platinum Nanostructures with Different Catalytic Activity

Proteins are promising biofunctional units for the construction of nanomaterials (NMs) due to their abundant binding sites, intriguing self-assembly properties, and mild NM synthetic conditions. Tobacco mosaic virus coat protein (TMVCP) is a protein capable of self-assembly into distinct morphologies depending on the solution pH and ionic strength. Herein, we report the use of TMVCP as a building block to organize nanosized platinum into discrete nanorings and isolated nanoparticles by varying the solution pH to modulate the protein assembly state. Compared with a commercial Pt/C catalyst, the TMVCP-templated platinum materials exhibited significant promotion of the catalytic activity and stability toward methanol electrooxidation in both neutral and alkaline conditions. The enhanced catalytic performance is likely facilitated by the protein support. Additionally, Pt nanorings outperformed isolated nanoparticles, although they are both synthesized on TMVCP templates. This could be due to the higher mechanical stability of the protein disk structure and possible cooperative effects between adjacent nanoparticles in the ring with narrow interparticle spacing.

Interfacial Engineering of CuCo2S4/g-C3N4 Hybrid Nanorods for Efficient Oxygen Evolution Reaction

Altering the morphology of electrochemically active nanostructured materials could fundamentally influence their subsequent catalytic as well as oxygen evolution reaction (OER) performance. Enhanced OER activity for mixed-metal spinel-type sulfide (CuCo₂S₄) nanorods is generally done by blending the material that has high conductive supports together with those having a high surface volume ratio, for example, graphitic carbon nitrides (g-C₃N₄). Here, we report a noble-metal-free CuCo₂S₄ nanorod-based electrocatalyst appropriate for basic OER and neutral media, through a simple one-step thermal decomposition approach from its molecular precursors pyrrolidine dithiocarbamate-copper(II), Cu[PDTC]₂, and pyrrolidine dithiocarbamate-cobalt(II), Co[PDTC]₂ complexes. Transmission electron microscopy (TEM) images as well as X-ray diffraction (XRD) patterns suggest that as-synthesized CuCo₂S₄ nanorods are highly crystalline in nature and are connected on the g-C₃N₄ support. Attenuated total reflectance-Fourier-transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy studies affirm the successful formation of bonds that bridge (Co-N/S-C) at the interface of CuCo₂S₄ nanorods and g-C₃N₄. The kinetics of the reaction are expedited, as these bridging bonds function as an electron transport chain, empowering OER electrocatalytically under a low overpotential (242 mV) of a current density at 10 mA cm^-2 under basic conditions, resulting in very high durability. Moreover, CuCo₂S₄/g-C₃N₄ composite nanorods exhibit a high catalytic activity of OER under a neutral medium at an overpotential of 406 mV and a current density of 10 mA cm^-2.

Surfactant-Free Synthesis of Three-Dimensional Metallic Nanonetworks via Nanobubble-Assisted Self-Assembly

Three-dimensional metallic nanonetworks (3D-MNWs) demonstrate unique performances across a wide range of fields, and their facile and green synthetic method is of high significance. Herein, we report a self-generated-nanobubble scaffolding strategy for the fabrication of 3D-MNWs, which employs aqua ammonia (AA) as a nanobubble reservoir and avoids the use of any surfactants or polymeric capping agents. Benefiting from the interaction between ammonia and metallic nanoparticles, finely interlocked nanonetworks (Au, Pt, Ag, and Cu) with curved geometry and abundant pores are obtained by precisely controlling the anisotropic kinetic growth using a strong reducing agent and a high concentration of AA. As a demonstration, the methanol oxidation reaction (MOR) is tested to assess the electrocatalytic performance of the Pt 3D-MNWs. The peak current of Pt 3D-MNWs reaches 152 mA/mg^Pt, which is 2.5 times higher than that of commercial Pt black. This unique nanobubble-assisted strategy has great potential in the basic synthetic prototype for polyporous nanomaterials.

Hollow Pd/Te nanorods for the effective electrooxidation of methanol

Methanol electrooxidation is significant in realizing effective C1 liquid fuel applications. Herein, hollow Pd/Te nanorods were fabricated and evaluated for methanol oxidation, and they were found to exhibit high catalytic efficiency for methanol oxidation in alkaline electrolyte compared to Pd or Pd/C catalysts. The hybrid structure of hexagonal crystal Te and face-centered cubic Pd was formed by microwave assisted Pd nanoparticle deposition over the surface of Te nanorods. Strong electronic effects and facile oxophilic properties were indicated in the Pd/Te system by spectroscopic analysis, which mainly accounts for the high catalytic performance for methanol oxidation. Specifically, they showed a peak current density of 90.1 mA cm^-2 for methanol oxidation, around 3.5 times higher than that of commercial Pd/C (26.3 mA cm^-2). High catalytic stability was also observed for Pd/Te, with a current retention of 64.3% after 3600 s of chronoamperometric testing, much higher than for Pd catalysts (20.1%). High anti-CO poisoning ability of the Pd/Te catalyst was demonstrated in the CO-stripping voltammetry results, and faster catalytic kinetics were also observed for this catalyst system. The electron-rich state of Pd and high active site exposure are responsible for the high performance of the Pd/Te catalyst in methanol oxidation.

Recent Progress of Ultrathin 2D Pd-Based Nanomaterials for Fuel Cell Electrocatalysis

Pd- and Pd-based catalysts have emerged as potential alternatives to Pt- and Pt-based catalysts for numerous electrocatalytic reactions, particularly fuel cell-related reactions, including the anodic fuel oxidation reaction (FOR) and cathodic oxygen reduction reaction (ORR). The creation of Pd- and Pd-based architectures with large surface areas, numerous low-coordinated atoms, and high density of defects and edges is the most promising strategy for improving the electrocatalytic performance of fuel cells. Recently, 2D Pd-based nanomaterials with single or few atom thickness have attracted increasing interest as potential candidates for both the ORR and FOR, owing to their remarkable advantages, including high intrinsic activity, high electron mobility, and straightforward surface functionalization. In this review, the recent advances in 2D Pd-based nanomaterials for the FOR and ORR are summarized. A fundamental understanding of the FOR and ORR is elaborated. Subsequently, the advantages and latest advances in 2D Pd-based nanomaterials for the FOR and ORR are scientifically and systematically summarized. A systematic discussion of the synthesis methods is also included which should guide researchers toward more efficient 2D Pd-based electrocatalysts. Lastly, the future outlook and trends in the development of 2D Pd-based nanomaterials toward fuel cell development are also presented.

Nanostructured metal phosphides: from controllable synthesis to sustainable catalysis

Metal phosphides (MPs) with unique and desirable physicochemical properties provide promising potential in practical applications, such as the catalysis, gas/humidity sensor, environmental remediation, and energy storage fields, especially for transition metal phosphides (TMPs) and MPs consisting of group IIIA and IVA metal elements. Most studies, however, on the synthesis of MP nanomaterials still face intractable challenges, encompassing the need for a more thorough understanding of the growth mechanism, strategies for large-scale synthesis of targeted high-quality MPs, and practical achievement of functional applications. This review aims at providing a comprehensive update on the controllable synthetic strategies for MPs from various metal sources. Additionally, different passivation strategies for engineering the structural and electronic properties of MP nanostructures are scrutinized. Then, we showcase the implementable applications of MP-based materials in emerging sustainable catalytic fields including electrocatalysis, photocatalysis, mild thermocatalysis, and related hybrid systems. Finally, we offer a rational perspective on future opportunities and remaining challenges for the development of MPs in the materials science and sustainable catalysis fields.

Efficient alcohol fuel oxidation catalyzed by a novel Pt/Se catalyst

Selenium spheres decorated with Pt nanoparticles were found to be efficient for alcohol fuel oxidation in fuel cells.

Hierarchical defective palladium-silver alloy nanosheets for ethanol electrooxidation

Tuning the chemical composition and surface structure of electrodes is demonstrated as a feasible and effective strategy to tailor advanced catalysts for energy electrocatalysis. In this work, hierarchical palladium-silver alloy nanosheets (PdAg NS) with the thickness ~7 atoms and rich atomic defects are successfully prepared, using the carbon monoxide (CO) confinement approach. The optimized Pd₇Ag₃ NS/C exhibits 8.8 times higher catalytic peak current density and much better stability toward ethanol electrooxidation than Pd NS/C catalyst. The catalytic enhancement mechanism could be attributed to the synergetic effects among optimized electronic structure of Pd, novel architecture, and rich atomic defects.

Interfacial Pd-O-Ce Linkage Enhancement Boosting Formic Acid Electrooxidation

Metal-support interaction enhancement is critical in the fuel cell catalyst design and fabrication. Herein, taking the Pd@CeO₂ system as an example, we revealed the substrate morphology coupling effect and the thermal annealing-induced Pd-O-Ce linkage enhancement in the improved catalytic capability for formic acid electrooxidation. Three well-defined CeO₂ nanocrystals were employed to support Pd nanoparticles, and the best catalytic performance for formic acid oxidation and anti-CO poisoning ability was found on CeO₂ plates because of the high oxygen vacancy, Ce³⁺, and more Pd-O-Ce linkages resulting from the more edge/corner defects. This interaction of Pd-O-Ce linkages could be largely enhanced by thermal annealing in the N₂ atmosphere, as confirmed by a series of crystal structures, surface chemical state, and Raman analysis because the oxygen vacancies and lattice oxygen resulting from the oxygen atoms leaching from the CeO₂ lattice would trap the mobile Pd nanocrystals by forming strengthened Pd-O-Ce linkages. Due to the high oxygen vacancy and strong Pd-O-Ce linkages, largely increased catalytic activity and stability, catalytic kinetics, and rapid charge transfer were found for all the thermal annealed Pd@CeO₂ catalysts. A nearly 1.93-fold enhancement in the mass activity was achieved on the Pd@CeO₂-plate catalysts demonstrating the significance of Pd-O-Ce linkage enhancement. The formation mechanism of Pd-O-Ce linkage was also probed, and a valid Pd-O-Ce linkage can only be formed in the inert atmosphere because of the reaction between metallic Pd and CeO₂. This finding sheds some light on the more efficient catalyst interface construction and understanding for the fuel cell catalysis via metal-support interaction enhancement.

Strong metal-support interactions enable highly transparent Pt-Mo2C counter electrodes of bifacial dye-sensitized solar cells

Highly transparent and active Pt-Mo₂C counter electrodes were successfully fabricated by the strong metal-support interaction, with high dispersity of Pt nanoclusters on Mo₂C support, which endowed bifacial dye-sensitized solar cells with a rear-to-front efficiency ratio as high as 0.75.

Advanced Catalytic Materials for Ethanol Oxidation in Direct Ethanol Fuel Cells

Direct ethanol fuel cells (DEFCs) have emerged as promising and advanced power systems that can considerably reduce fossil fuel dependence, and thus have attracted worldwide attention. DEFCs have many apparent merits over the analogous devices fed with hydrogen or methanol. As the key constituents, the catalysts for both cathodes and anodes usually face some problems (such as high cost, low conversion efficiency, and inferior durability) that hinder the commercialization of DEFCs. This review mainly focuses on the most recent advances in nanostructured catalysts for anode materials in DEFCS. First, we summarize the effective strategies used to achieve highly active Pt- and Pd-based catalysts for ethanol electro-oxidation, including composition control, microstructure design, and the optimization of support materials. Second, a few non-precious catalysts based on transition metals (such as Fe, Co, and Ni) are introduced. Finally, we outline the concerns and future development of anode catalysts for DEFCs. This review provides a comprehensive understanding of anode catalysts for ethanol oxidation in DEFCs.

Nanoscale engineering of porous Fe-doped Pd nanosheet assemblies for efficient methanol and ethanol electrocatalyses

Although great successes have been accomplished on the controlled synthesis of 2D and 3D Pd-containing nanomaterials, tapping into the novel Pd-containing electrocatalysts that combined the advantages of both 2D and 3D structures remains a significant challenge. Here, an approach to systematically produce porous Fe-doped Pd nanosheet assemblies (NSAs) with a geometry tuning from PdFe hollow nanospheres (HNSs), PdFe nanocages (NCs), to PdFe nanoplates (NPs) is reported. The inherent ultrathin and porous features endow these PdFe catalysts with excellent electrocatalytic performance. As a result, the optimized 3D PdFe NCs show a much-improved methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) activities in comparison with PdFe HNSs, Pd NPs, and commercial Pd/C catalysts. Moreover, these PdFe nanocatalysts also display greatly enhanced electrocatalytic stability, which can endure 500 cycles with negligible activity loss and structural changes. The mechanism investigations reveal that the introduced Fe atom efficiently modulates the electronic structure of Pd, leading to the downshift of the d-band center of Pd, which is beneficial for the adsorption of reactants. Moreover, the porous nanosheet assembly structure can provide rich mass and electron transfer channels, further boosting the improvement of electrocatalytic performance.

Engineering the Metal/Oxide Interface of Pd Nanowire@CuOx Electrocatalysts for Efficient Alcohol Oxidation Reaction

The development of new type electrocatalysts with promising activity and antipoisoning ability is of great importance for electrocatalysis on alcohol oxidation. In this work, Pd nanowire (PdNW)/CuO_x heterogeneous catalysts with different types of PdOCu interfaces (Pd/amorphous or crystalline CuO_x ) are prepared via a two-step hydrothermal strategy followed by an air plasma treatment. Their interface-dependent performance on methanol and ethanol oxidation reaction (MOR and EOR) is clearly observed. The as-prepared PdNW/crystalline CuO_x catalyst with 17.2 at% of Cu on the PdNW surface exhibits better MOR and EOR activity and stability, compared with that of PdNW/amorphous CuO_x and pristine PdNW catalysts. Significantly, both the cycling tests and the chronoamperometric measurements reveal that the PdNW/crystalline CuO_x catalyst yields excellent tolerance toward the possible intermediates including formaldehyde, formic acid, potassium carbonate, and carbon monoxide generated during the MOR process. The detailed analysis of their chemical state reveals that the enhanced activity and antipoison ability of the PdNW/crystalline CuO_x catalyst originates from the electron-deficient Pd^δ+ active sites which gradually turn into Pd₅ O₄ species during the MOR catalysis. The Pd₅ O₄ species can likely be stabilized by moderate crystalline CuO_x decorated on the surface of PdNW due to the strong PdOCu interaction.

Core-shell structured PtRu nanoparticles@FeP promoter with an efficient nanointerface for alcohol fuel electrooxidation

In this study, a bottleneck was overcome for direct alcohol fuel cells using state-of-the-art PtRu catalysts for alcohol fuel oxidation. Herein, a core-shell structured PtRu catalyst system based on the emerging promoter FeP was developed that showed excellent catalytic performance for the oxidation of alcohol fuels. The surface spectrometric analysis and morphology observation confirmed the formation of a nanointerface of the PtRu shell and FeP core hybrid catalyst (PtRu@FeP), and efficient ligand effects and electronic effects were found to result from the noble metal active sites and adjacent promoter in the core-shell structure. The facile formation of oxygen-containing species and the strong electronic effects could activate the Pt active sites, leading to high catalytic performance. High anti-CO poisoning ability was found for this catalyst system when compared with the case of the benchmark commercial PtRu/C catalyst (110 mV less and 60 mV less as evaluated by the peak and onset potentials for CO oxidation, respectively). The PtRu@FeP catalysts also exhibited much higher catalytic activity and stability when compared with commercial and home-made PtRu/C catalysts; specifically, the peak current density of the PtRu@FeP 1 : 1 catalyst was about 2 and 3 times higher than those of the commercial PtRu/C catalyst and home-made PtRu/C for the oxidation of the alcohol fuels methanol and ethanol; moreover, high catalytic efficiency, improved by 2 times, was found, as expressed by the specific activity. Excellent catalytic stability as evaluated by 1000 cycles of cyclic voltammetry measurements was also demonstrated for the PtRu@FeP catalysts. The high catalytic performance could be attributed to the intimate nanointerface contact of the core-shell structured PtRu shell over the FeP core via a bi-functional catalytic mechanism and electronic effects based on the ligand effect in this catalyst system. The current study is a significant step to increase the PtRu catalytic performance via nanointerface construction by a core-shell structure on a novel promoter for direct alcohol fuel cells.

Bimetallic Pd96Fe4 nanodendrites embedded in graphitic carbon nanosheets as highly efficient anode electrocatalysts

A facile route to anchor a nanoalloy catalyst on graphitic carbon nanosheets (GCNs) has been developed for preparing high-performance electrode materials for application in direct alcohol fuel cells (DAFCs). Uniformly dispersed bimetallic Pd-Fe nanoparticles (NPs) with tunable composition have been immobilized on GCNs derived from mesocarbon microbeads (MCMBs) by a one-pot radiolytic reduction method. The Pd-Fe/GCN hybrid shows promising electrocatalytic activity for the methanol, ethanol, ethylene glycol, tri-ethylene glycol and glycerol oxidation reactions in alkaline medium. The as-prepared flower-shape Pd₉₆Fe₄/GCN nanohybrids have high mass activity for the ethanol oxidation reaction (EOR), which is ∼36 times (11 A per mg Pd) higher than that of their monometallic counterparts. Moreover, the onset oxidation potential for the EOR on the Pd₉₆Fe₄/GCN nanohybrids negatively shifts ca. 780 mV compared to that on commercial Pd/C electrocatalysts, suggesting fast kinetics and superior electrocatalytic activity. Additionally, chronoamperometry measurements display good long-term cycling stability of the Pd₉₆Fe₄/GCN nanohybrids for the EOR and also demonstrate only ∼7% loss in forward current density after 1000 cycles. The superior catalytic activity and stability may have originated from the modified electronic structure of the Pd-Fe nanoalloys and excellent physicochemical properties of the graphitic nanosheets. The present synthetic route using GCNs as the supporting material will contribute to further design of multimetallic nanoarchitectures with controlled composition and desired functions for fuel cell applications.

Superior Ethanol Oxidation Electrocatalysis Enabled by Ternary Pd-Rh-Te Nanotubes

Designing and elaborating cost-efficient Pd-based electrocatalysts for direct ethanol fuel cells is thought to be a significant approach to obliterating the challenge of large-scale practical application of fuel cells. Herein, our group creates a novel class of one-dimensional (1D) PdRhTe nanotubes (NTs) by using H₂PdCl₄ and RhCl₃ as metal precursors and Te nanowires (NWs) as the reductant and sacrificial template. Strikingly, the as-obtained PdRhTe ternary nanomaterials with a unique 1D nanotube structure display a high specific activity of 6.53 mA cm^-2 and a mass activity of 2039.2 mA mg^-1 for the ethanol oxidation reaction (EOR) in alkaline media, which are 1.25 (1.6) and 1.77 (8.0) times those of PdTe/C and (Pd/C), respectively. More significantly, further electrochemical measurements such as CA and successive CV confirm that the optimized PdRhTe NTs display desirable durability and negligible activity decay. Taking advantage of physicochemical characterizations and electrochemical measurements, we reasonably reveal that the outstanding electrocatalytic performances are derived from the unique geometric structure and synergistic effect. The introduction of Rh facilitates the cleavage of C-C bonds, increasing the self-stability of PdRhTe NTs. In general terms, this work should provide new orientations to synthesize cost-efficient electrocatalysts by a sacrificial template method.

Pt nanoparticles anchored over Te nanorods as a novel and promising catalyst for methanol oxidation reaction

Pt/Te nanorods exhibited excellent catalytic performance for methanol oxidation in both acidic and alkaline electrolytes.

Recent progress in Pt and Pd-based hybrid nanocatalysts for methanol electrooxidation

Hybrid nanomaterials can combine merits of different components and modulate electronic states of Pt and Pd based nanocrystals simultaneously.