1
|
Sinha P, Sharma A. The prospect of supercapacitors in integrated energy harvesting and storage systems. NANOTECHNOLOGY 2024; 35:382001. [PMID: 38904267 DOI: 10.1088/1361-6528/ad5a7b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/29/2023] [Accepted: 06/11/2024] [Indexed: 06/22/2024]
Abstract
Renewable energy sources, such as wind, tide, solar cells, etc, are the primary research areas that deliver enormous amounts of energy for our daily usage and minimize the dependency upon fossil fuel. Paralley, harnessing ambient energy from our surroundings must be prioritized for small powered systems. Nanogenerators, which use waste energy to generate electricity, are based on such concepts. We refer to these nanogenerators as energy harvesters. The purpose of energy harvesters is not to outcompete traditional renewable energy sources. It aims to reduce reliance on primary energy sources and enhance decentralized energy production. Energy storage is another area that needs to be explored for quickly storing the generated energy. Supercapacitor is a familiar device with a unique quick charging and discharging feature. Encouraging advancements in energy storage and harvesting technologies directly supports the efficient and comprehensive use of sustainable energy. Yet, self-optimization from independent energy harvesting and storage devices is challenging to overcome. It includes instability, insufficient energy output, and reliance on an external power source, preventing their direct application and future development. Coincidentally, integrating energy harvesters and storage devices can address these challenges, which demand their inherent action. This review intends to offer a complete overview of supercapacitor-based integrated energy harvester and storage systems and identify opportunities and directions for future research in this subject.
Collapse
Affiliation(s)
- Prerna Sinha
- Centre for Nanosciences, Indian Institute of Technology Kanpur, Uttar Pradesh 208016, India
| | - Ashutosh Sharma
- Centre for Nanosciences, Indian Institute of Technology Kanpur, Uttar Pradesh 208016, India
- Department of Chemical Engineering, Indian Institute of Technology Kanpur, Uttar Pradesh 208016, India
- Materials Science Programme, Indian Institute of Technology Kanpur, Uttar Pradesh 208016, India
- Department of Sustainable Energy Engineering, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh 208016, India
| |
Collapse
|
2
|
Wei Y, Zu G, Sun C, Yang X. Flexible, Wash-Resistant Human Mechanical Energy Harvesting and Storage System for Monitoring Human Movement. LANGMUIR : THE ACS JOURNAL OF SURFACES AND COLLOIDS 2023; 39:4060-4070. [PMID: 36942451 DOI: 10.1021/acs.langmuir.2c03405] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/18/2023]
Abstract
The rapid development of personal portable electronic devices has brought an increasingly urgent need for flexible and portable power sources. Herein, a low-cost, wearable, efficient, sustainable energy harvesting and storage system for human motion detection has been developed, based on a supercapacitor (SC) and triboelectric nanogenerator (TENG). Carbon cloth (CC)-loaded ZnO/ZnS nanoarrays and a PVD-treated polyurethane conductive sponge are employed as positive and negative triboelectric friction layers, respectively. Besides, flexible and robust silicone rubber provides stable output performance and enables the TENG to harvest mechanical energy from human motion even under complex conditions. As a result, it shows excellent electrical output performance in terms of the open-circuit voltage, short-circuit current, and average power density, reaching 175 V, 12 μA, and 816.7 mW m-2, respectively. These outstanding performances enable the TENG to effectively charge an all-solid-state symmetrical SC (MnO2/LiMn2O4@CC//MnO2/LiMn2O4@CC) and subsequently store it as electrochemical energy for sustainable power supply. Because of the flexible all-texture-type structure of the entire system, it is capable of monitoring the human body's movement. This work has a promising future in random mechanical energy harvesting and storage, as well as human motion tracking.
Collapse
Affiliation(s)
- Ye Wei
- Key Laboratory of Advanced Structural Materials, Ministry of Education & Advanced Institute of Materials Science, Changchun University of Technology, Changchun 130012, China
| | - Guoqing Zu
- Key Laboratory of Advanced Structural Materials, Ministry of Education & Advanced Institute of Materials Science, Changchun University of Technology, Changchun 130012, China
| | - Chuanyu Sun
- Key Laboratory of Advanced Structural Materials, Ministry of Education & Advanced Institute of Materials Science, Changchun University of Technology, Changchun 130012, China
| | - Xijia Yang
- Key Laboratory of Advanced Structural Materials, Ministry of Education & Advanced Institute of Materials Science, Changchun University of Technology, Changchun 130012, China
| |
Collapse
|
3
|
Super-tough and self-healable all-cellulose-based electrolyte for fast degradable quasi-solid-state supercapacitor. Carbohydr Polym 2023; 304:120502. [PMID: 36641192 DOI: 10.1016/j.carbpol.2022.120502] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/23/2022] [Revised: 12/18/2022] [Accepted: 12/22/2022] [Indexed: 12/31/2022]
Abstract
Recyclable and degradable supercapacitors have promising applications for a sustainable energy storage industry. Herein, we prepare a dual-physical crosslinking (DP) carboxymethyl cellulose (CMC) hydrogel with high-toughness, healability, and electric conductivity by integrating abundant ions into the matrix. The prepared hydrogel displays a maximum compressive fracture stress of 4.42 MPa, fast healing in five seconds, and full degradation within eight days. Moreover, the fabricated supercapacitor shows high specific capacitance (309 F g-1) and volumetric capacitance (2.60 F cm-3). The supercapacitor achieves a healing efficiency of 93.9 % after five cuttings, and exhibits a cycling stability of 84.6 % capacitance retention after 1000 cycles. These merits ensure that the all-cellulose-based supercapacitor can operate in case of sudden collision and deformation, which contribute to reducing the environmental hazards from supercapacitor's preparation to its abandonment.
Collapse
|
4
|
Gopal SR, Velayutham TS, Gan WC, Cheong JY, Soh AE. A hybrid piezoelectric and triboelectric nanogenerator with lead-free BZT-BCT/PDMS composite and PVA film for scavenging mechanical energy. RSC Adv 2023; 13:7921-7928. [PMID: 36909754 PMCID: PMC9997075 DOI: 10.1039/d3ra00077j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/05/2023] [Accepted: 02/24/2023] [Indexed: 03/11/2023] Open
Abstract
A hybrid piezo/triboelectric nanogenerator (H/P-TENG) is designed for mechanical energy harvesting using polymer ceramic composite films; polydimethylsiloxane/Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 (PDMS/BZT-BCT) and polyvinyl alcohol (PVA). A lead-free BZT-BCT piezoelectric ceramic was prepared via solid-state method and blended into PDMS to form a series of polymer-ceramic composite films, ranging from 5% to 30% by weight. The films were forward/reverse poled with corona poling and their electrical properties were compared to non-poled samples. The H/P-TENG constructed with forward-poled 15 wt% BZT-BCT in PDMS achieved the highest open-circuit voltage, V oc of 127 V, short-circuit current density, J sc of 67 mA m-2, short-circuit charge density, Q sc of 118 μC m-2, and peak power density of 7.5 W m-2, an increase of 190% over pristine PDMS-based TENG. It was discovered that incorporating BZT-BCT into the PDMS matrix improved the triboelectric properties of PDMS. The overlapping electron cloud (OEC) model was used to explain the enhancement and the effect of poling direction of the PDMS/BZT-BCT composite used in H/P-TENG, providing fundamental knowledge of the influence of piezoelectric polarisation on contact electrification.
Collapse
Affiliation(s)
- S R Gopal
- Low Dimensional Materials Research Centre, Department of Physics, Faculty of Science, Universiti Malaya 50603 Kuala Lumpur Malaysia
| | - T S Velayutham
- Low Dimensional Materials Research Centre, Department of Physics, Faculty of Science, Universiti Malaya 50603 Kuala Lumpur Malaysia
| | - W C Gan
- School of Energy and Chemical Engineering, Xiamen University Malaysia Jalan Sunsuria Bandar Sunsuria Selangor Darul Ehsan 43900 Malaysia
| | - J Y Cheong
- Low Dimensional Materials Research Centre, Department of Physics, Faculty of Science, Universiti Malaya 50603 Kuala Lumpur Malaysia
| | - A E Soh
- Low Dimensional Materials Research Centre, Department of Physics, Faculty of Science, Universiti Malaya 50603 Kuala Lumpur Malaysia
| |
Collapse
|
5
|
Chou S, Lu H, Liu T, Chen Y, Fu Y, Shieh Y, Lai Y, Chen S. An Environmental-Inert and Highly Self-Healable Elastomer Obtained via Double-Terminal Aromatic Disulfide Design and Zwitterionic Crosslinked Network for Use as a Triboelectric Nanogenerator. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2202815. [PMID: 36453583 PMCID: PMC9839881 DOI: 10.1002/advs.202202815] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 05/13/2022] [Revised: 08/11/2022] [Indexed: 06/17/2023]
Abstract
Due to the ongoing development of portable/mobile electronics, sources to power have received widespread attention. Compared to chemical batteries as power sources, triboelectric nanogenerators (TENGs) possess lots of advantages, including the ability to harvest energy via human motions, flexible structures, environment-friendliness, and long-life characteristics. Although many self-healable TENGs are reported, the achievement of a muscle-like elasticity and the ability to recover from inevitable damage under extreme conditions (such as a high/low temperature and/or humidity) remain a challenge. Herein, a "double-terminal aromatic disulfide" on a structure with zwitterions as branched chains is reported to engineer the high-efficient self-healable elastomer for application in a flexible TENG. The as-designed material exhibits a repeatable elastic recovery (at 250% elongation) and a self-healing efficiency with an ultimate tensile stress of 96% over 2 h, representing an improvement on previously reported disulfide-based elastomers. The elastomer can autonomously recover by 50% even at a subzero temperature of -30 °C within 24 h. The elastomer-based TENG, as a self-driven sensor for detecting human behavior, is demonstrated to exhibit stable outputs and self-healing in the temperature range of -30 to 60 °C, and so is expected to promote the development of self-powered electronics for next-generation human-machine communications.
Collapse
Affiliation(s)
- Syun‐Hong Chou
- Department of Materials Science and EngineeringNational Yang Ming Chiao Tung UniversityHsinchu30010Taiwan
| | - Hong‐Wei Lu
- Department of Materials Science and EngineeringNational Chung Hsing UniversityTaichung40227Taiwan
| | - Ta‐Chung Liu
- Department of Biomedical EngineeringNational Yang Ming Chiao Tung UniversityTaipei112304Taiwan
| | - Yi‐Ting Chen
- Department of Materials Science and EngineeringNational Chung Hsing UniversityTaichung40227Taiwan
| | - Yen‐Lin Fu
- Department of Materials Science and EngineeringNational Yang Ming Chiao Tung UniversityHsinchu30010Taiwan
| | - Yung‐Hsin Shieh
- Department of Materials Science and EngineeringNational Tsing Hua UniversityHsinchu300044Taiwan
| | - Ying‐Chih Lai
- Department of Materials Science and EngineeringNational Chung Hsing UniversityTaichung40227Taiwan
- Innovation and Development Center of Sustainable Agriculturei‐Center for Advanced Science and TechnologyNational Chung Hsing UniversityTaichung40227Taiwan
| | - San‐Yuan Chen
- Department of Materials Science and EngineeringNational Yang Ming Chiao Tung UniversityHsinchu30010Taiwan
- Graduate Institute of Biomedical ScienceChina Medical UniversityTaichung City406040Taiwan
- Frontier Research Centre on Fundamental and Applied Sciences of MattersNational Tsing Hua UniversityHsinchu300044Taiwan
- School of DentistryCollege of Dental MedicineKaohsiung Medical UniversityKaohsiung City80708Taiwan
| |
Collapse
|
6
|
Pattipaka S, Bae YM, Jeong CK, Park KI, Hwang GT. Perovskite Piezoelectric-Based Flexible Energy Harvesters for Self-Powered Implantable and Wearable IoT Devices. SENSORS (BASEL, SWITZERLAND) 2022; 22:s22239506. [PMID: 36502209 PMCID: PMC9735637 DOI: 10.3390/s22239506] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/04/2022] [Revised: 11/29/2022] [Accepted: 11/30/2022] [Indexed: 06/12/2023]
Abstract
In the ongoing fourth industrial revolution, the internet of things (IoT) will play a crucial role in collecting and analyzing information related to human healthcare, public safety, environmental monitoring and home/industrial automation. Even though conventional batteries are widely used to operate IoT devices as a power source, these batteries have a drawback of limited capacity, which impedes broad commercialization of the IoT. In this regard, piezoelectric energy harvesting technology has attracted a great deal of attention because piezoelectric materials can convert electricity from mechanical and vibrational movements in the ambient environment. In particular, piezoelectric-based flexible energy harvesters can precisely harvest tiny mechanical movements of muscles and internal organs from the human body to produce electricity. These inherent properties of flexible piezoelectric harvesters make it possible to eliminate conventional batteries for lifetime extension of implantable and wearable IoTs. This paper describes the progress of piezoelectric perovskite material-based flexible energy harvesters for self-powered IoT devices for biomedical/wearable electronics over the last decade.
Collapse
Affiliation(s)
- Srinivas Pattipaka
- Department of Materials Science and Engineering, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea
| | - Young Min Bae
- Department of Materials Science and Engineering, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea
| | - Chang Kyu Jeong
- Division of Advanced Materials Engineering, Jeonbuk National University, Jeonju 54896, Republic of Korea
| | - Kwi-Il Park
- School of Materials Science and Engineering, Kyungpook National University, Daegu 41566, Republic of Korea
| | - Geon-Tae Hwang
- Department of Materials Science and Engineering, Pukyong National University, 45, Yongso-ro, Nam-Gu, Busan 48513, Republic of Korea
| |
Collapse
|
7
|
Zhao Q, Zhitomirsky I. Biomimetic strategy for electrophoretic deposition of composite ferroelectric poly(vinylidene, fluoride-co-hexafluoropropylene) – ferrimagnetic NiFe2O4 films. Colloids Surf A Physicochem Eng Asp 2022. [DOI: 10.1016/j.colsurfa.2022.129743] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
8
|
Zhao Q, Liu X, Veldhuis S, Zhitomirsky I. Colloidal processing of ferroelectric poly(vinylidene fluoride-co-hexafluoropropylene)—ferrimagnetic pseudocapacitive CuFe2O4 composite films. Colloid Polym Sci 2022. [DOI: 10.1007/s00396-022-05022-9] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/03/2022]
|
9
|
Lu G, Huang C, Qiu M, Zhang Q, Cui S, Zhang L, Zhang YY, Mi L. Output Enhancement of Triboelectric Nanogenerators Based on Hierarchically Regular Cadmium Coordination Polymers for Photocycloaddition. Inorg Chem 2022; 61:12736-12745. [PMID: 35929450 DOI: 10.1021/acs.inorgchem.2c01810] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Exploiting the well-arranged and tunable frameworks of crystalline materials, we herein report coordination polymers (CPs) with modulated hierarchical structures as triboelectric materials to construct and extend the application scope of triboelectric nanogenerators (TENGs). Different lengths and shapes of bridging ligands [4,4'-bpa = 1,2-bis(4-pyridyl)ethane, 4,4'-bpe = 1,2-bis(4-pyridyl)ethene, and 4,4'-bpp = 1,3-di(2-pyridyl)propane for 1, 2, and 3, respectively] were used to construct Cd-CP-based hierarchical frameworks. These compounds were used as triboelectric materials, and their electronic structure contributions were determined by the output of the corresponding TENGs. The results indicated that 2-TENG with the 4,4'-bpe ligand had the highest output, attributed to the improvement in the electron activity due to the π-conjugation group in the bridging ligand, which was further verified by density functional theory calculations. Furthermore, 2@PVDF (PVDF = polyvinylidene fluoride) composite films with different concentrations of Cd-CP were prepared. Detailed electrical characterizations revealed that the arrangement of 12% active constituents of Cd-CP-2 effectively enhanced the output performance of 2@PVDF-TENG, which could light up an ultraviolet lamp plate to successfully execute the [2 + 2] photocycloaddition.
Collapse
Affiliation(s)
- Guizhen Lu
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou 450007, China
| | - Chao Huang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou 450007, China
| | - Mei Qiu
- Department of Chemistry, College of Science, Jiangxi Agricultural University, Nanchang 330045, China
| | - Qiang Zhang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou 450007, China
| | - Siwen Cui
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou 450007, China
| | - Lin Zhang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou 450007, China
| | - Ying-Ying Zhang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou 450007, China
| | - Liwei Mi
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou 450007, China
| |
Collapse
|
10
|
Direct growth of hierarchical CoFe2O4 flower-like nanoflake arrays on Ni foam for high performance asymmetrical supercapacitor. J Electroanal Chem (Lausanne) 2022. [DOI: 10.1016/j.jelechem.2022.116385] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
11
|
Nellepalli P, Kim MP, Park J, Noh SM, Ye Z, Jung HW, Ko H, Oh JK. Dynamic and Reprocessable Fluorinated Poly(hindered urea) Network Materials Containing Ionic Liquids to Enhance Triboelectric Performance. ACS APPLIED MATERIALS & INTERFACES 2022; 14:17806-17817. [PMID: 35385641 DOI: 10.1021/acsami.2c01963] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Triboelectric nanogenerators (TENGs), a newly developed energy harvesting device that converts surrounding environmental mechanical stimuli into electricity, have been significantly explored as an ideal long-term power source for electrical devices. Despite recent advances, the development of advanced TENG devices with sufficient outputs to sustainably power electronic devices and rapid self-healability under mild conditions to improve their lifetime and function is highly demanded. Here, we report a robust self-healable and reprocessable TENG fabricated with a covalent adaptive network based on mechanically strong fluorinated poly(hindered urea) (F-PHU) integrated with ionic liquid as an efficient dielectric material to improve its triboelectric efficiency and self-healing capability simultaneously. The synthesis and integration of a well-defined reactive copolymer having both pendant fluorinated and t-butylamino bulky groups are the key to fabricate robust F-PHU networks containing fluorinated dangling chains that can interact with ionic liquids to induce ionic polarization, which raises the dielectric constant and thus increases triboelectric performance. They also are cross-linked with dynamic bulky urea linkages for rapid self-healability and high reprocessability through their reversible exchange reactions at moderate temperatures. The developed ionic F-PHU materials exhibit a high TENG output performance (power density of 173.0 mW/m2) as well as high TENG output recovery upon repairing their surface damages. This work demonstrates that such a synergistic design of triboelectric ionic F-PHU materials could have great potential for applications requiring high-performance and long-lasting energy harvesting.
Collapse
Affiliation(s)
- Pothanagandhi Nellepalli
- Department of Chemistry and Biochemistry, Concordia University, Montreal, Quebec H4B 1R6, Canada
| | - Minsoo P Kim
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Junyoung Park
- Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Seung Man Noh
- Research Center for Advanced Specialty Chemicals, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44412, Republic of Korea
| | - Zhibin Ye
- Department of Chemical and Materials Engineering, Concordia University, Montreal, Quebec H4B 1R6, Canada
| | - Hyun Wook Jung
- Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Hyunhyub Ko
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Jung Kwon Oh
- Department of Chemistry and Biochemistry, Concordia University, Montreal, Quebec H4B 1R6, Canada
| |
Collapse
|
12
|
Wang W, Zhang YY, Zhang S, Huang C, Mi L. A facile method to enhance the output performance of triboelectric nanogenerators based on coordination polymers by modulating terminal coordination groups. CrystEngComm 2022. [DOI: 10.1039/d1ce01344k] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
Abstract
Three isostructural Cu(i)-CPs with different terminal halogen atoms were introduced into the fabrication of TENGs, and were further applied for self-powered electrochemical cathodic protection.
Collapse
Affiliation(s)
- Wenjie Wang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Ying-Ying Zhang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Sheng Zhang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Chao Huang
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Liwei Mi
- Center for Advanced Materials Research, Henan Key Laboratory of Functional Salt Materials, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| |
Collapse
|
13
|
Nellepalli P, Patel T, Kim MP, Park J, Ye Z, Jung HW, Ko H, Oh JK. Self-healable triboelectric nanogenerators based on ionic poly(hindered urea) network materials cross-linked with fluorinated block copolymers. Polym Chem 2022. [DOI: 10.1039/d2py00252c] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
The versatility of a reactive block copolymer approach to fabricate ionic poly(hindered urea)-based covalent adaptive networks having pendant fluorinated species formulated with ionic liquid for effective self-healable triboelectric nanogenerators.
Collapse
Affiliation(s)
- Pothanagandhi Nellepalli
- Department of Chemistry and Biochemistry, Concordia University, Montreal, Quebec, Canada H4B 1R6
| | - Twinkal Patel
- Department of Chemistry and Biochemistry, Concordia University, Montreal, Quebec, Canada H4B 1R6
| | - Minsoo P. Kim
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Junyoung Park
- Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Zhibin Ye
- Department of Chemical and Materials Engineering, Concordia University, Montreal, Quebec H4B 1R6, Canada
| | - Hyun Wook Jung
- Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Hyunhyub Ko
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Jung Kwon Oh
- Department of Chemistry and Biochemistry, Concordia University, Montreal, Quebec, Canada H4B 1R6
| |
Collapse
|
14
|
Wen N, Song T, Ji Z, Jiang D, Wu Z, Wang Y, Guo Z. Recent advancements in self-healing materials: Mechanicals, performances and features. REACT FUNCT POLYM 2021. [DOI: 10.1016/j.reactfunctpolym.2021.105041] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
|
15
|
Tao X, Zhou Y, Qi K, Guo C, Dai Y, He J, Dai Z. Wearable textile triboelectric generator based on nanofiber core-spun yarn coupled with electret effect. J Colloid Interface Sci 2021; 608:2339-2346. [PMID: 34774315 DOI: 10.1016/j.jcis.2021.10.151] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/03/2021] [Revised: 10/24/2021] [Accepted: 10/25/2021] [Indexed: 01/01/2023]
Abstract
Flexible triboelectric generators present a wide range of prospective applications owing to their small size, light weight, and wearability; in addition, they can convert external mechanical energy into electrical energy to provide an energy supply for wearable electronic products. In this study, a wearable textile triboelectric generator was developed by weaving polyurethane (PU) nanofiber core-spun yarn and Si3N4-electret-doped polyvinylidene fluoride (PVDF) nanofiber core-spun yarn into a double-layer fabric. Within the double-layer fabric, one layer was Si3N4-doped PVDF (denoted as Si3N4@PVDF) nanofiber fabric, and the other was PU nanofiber fabric. When subjected to an external mechanical force, PU nanofiber fabric and Si3N4@PVDF nanofiber fabric came into contact and were able to convert external mechanical energy into electrical energy. The most notable instantaneous electrical performance of this triboelectric nanogenerator was open circuit voltage of 71 V, short-circuit current of 0.7 μA, and output power of 56 μW. Additionally, the wearable textile triboelectric generator exhibited superior washability, stability, and cycle durability. More significantly, it was capable of driving some low-consumption electronic products, including capacitors, LED bulbs, and digital meters, thereby exhibiting a strong potential for flexible self-powered electronic devices and intelligent textiles.
Collapse
Affiliation(s)
- Xuejiao Tao
- Textile and Garment Industry Research Institute, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China; School of Textile Science and Engineering, Tiangong University, Tianjin 300387, People's Republic of China
| | - Yuman Zhou
- Textile and Garment Industry Research Institute, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China; Henan International Joint Laboratory of new textile materials and textiles, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China.
| | - Kun Qi
- Textile and Garment Industry Research Institute, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China; Henan International Joint Laboratory of new textile materials and textiles, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China
| | - Chaozhong Guo
- Textile and Garment Industry Research Institute, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China; Henan International Joint Laboratory of new textile materials and textiles, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China
| | - Yunling Dai
- Textile and Garment Industry Research Institute, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China; Henan International Joint Laboratory of new textile materials and textiles, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China
| | - Jianxin He
- Textile and Garment Industry Research Institute, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China; Henan International Joint Laboratory of new textile materials and textiles, Zhongyuan University of Technology, Zhengzhou 450007, People's Republic of China.
| | - Zhao Dai
- School of Textile Science and Engineering, Tiangong University, Tianjin 300387, People's Republic of China
| |
Collapse
|
16
|
Singh S, Tripathi RK, Gupta MK, Dzhardimalieva GI, Uflyand IE, Yadav B. 2-D self-healable polyaniline-polypyrrole nanoflakes based triboelectric nanogenerator for self-powered solar light photo detector with DFT study. J Colloid Interface Sci 2021; 600:572-585. [PMID: 34034119 DOI: 10.1016/j.jcis.2021.05.052] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2021] [Revised: 05/05/2021] [Accepted: 05/09/2021] [Indexed: 01/03/2023]
Abstract
This work demonstrates an easy and cost-effective synthesis of PANI-PPY conducting nanoflakes (NFs) with a self-healing capability. Scanning electron microscopic (SEM) analysis shows the minimum width of NFs as 30 nm, while HRTEM analysis confirms the shape, size, and semi-crystalline nature of the polymer. These PANI-PPY NFs were used to fabricate a contact separation mode triboelectric nanogenerator (TENG) based self-powered photosensor which gave the maximum output voltage (149 V), maximum output current (16 µA), current density 0.56 µAcm-2, and power density 83.56 µWcm-2. Detailed literature survey shows the comparative study of PANI-PPY NF's with other photo-sensing materials. This literature review highlights the tremendous ability of PANI-PPY to self-restore and ultra-fast self-powering nature. This work also demonstrates a very easy and cost-effective method to develop polymeric nanomaterials via temperature-assisted polymerization, which need only a stirrer with a hot plate. Theoretical analysis (DFT calculations using Gaussian 09 and Gauss view 05) shows a consistent increase in stability when the number of molecules in the polymer chains analyzed was increased. The developed self-healing triboelectric nanogenerators exhibited stable performance before and after healing.
Collapse
Affiliation(s)
- Shakti Singh
- Nanomaterials and Sensors Research Laboratory, Department of Physics, Babasaheb Bhimrao Ambedkar University, Lucknow 226025, India
| | - Ravi Kant Tripathi
- Nanomaterials and Sensors Research Laboratory, Department of Physics, Babasaheb Bhimrao Ambedkar University, Lucknow 226025, India
| | - Manoj Kumar Gupta
- CSIR-Avanced Materials and Processes Research Institute, Bhopal 462026, India
| | - Gulzhian I Dzhardimalieva
- Laboratory of Metallopolymers, The Institute of Problems of Chemical Physics RAS, Academician Semenov Avenue 1, Chernogolovka, Moscow Region 142432, Russian Federation
| | - Igor E Uflyand
- Department of Chemistry, Southern Federal University, B. Sadovaya Str. 105/42, Rostov-on-Don 344006, Russian Federation
| | - BalChandra Yadav
- Nanomaterials and Sensors Research Laboratory, Department of Physics, Babasaheb Bhimrao Ambedkar University, Lucknow 226025, India.
| |
Collapse
|
17
|
Zhang H, Liu X, Wang J, Zhang B, Chen J, Yang L, Wang G, Li M, Zheng Y, Zhou X, Han G. Solution-Synthesized SnSe 1-xS x: Dual-Functional Materials with Enhanced Electrochemical Storage and Thermoelectric Performance. ACS APPLIED MATERIALS & INTERFACES 2021; 13:37201-37211. [PMID: 34328302 DOI: 10.1021/acsami.1c10081] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
The exploration of materials with multifunctional properties, such as energy harvesting and storage, is crucial in integrated energy devices and technologies. Herein, through an organic-free "soft chemical" solution method, a series of dual-functional SnSe1-xSx (x = 0, 0.1, 0.2, 0.3, 0.4, and 0.5) nanoparticles have been developed toward high-performance electrochemical energy storage and thermoelectric conversion. Among the synthesized S-substituted SnSe, SnSe0.5S0.5 exhibits the highest rate capacity (546.1 mA h g-1 at 2 A g-1) and the best reversible capacity (556.2 mA h g-1 at 0.1 A g-1 after 100 cycles), which are much enhanced compared to those of SnSe. Density functional theory calculation confirms that the composition regulation by S substitution can lower the diffusion barrier of Li+, boost the diffusion rate of Li+, and in turn enhance the electrochemical kinetics, thus increasing the Li+ storage performance. Meanwhile, partially replacing Se by S decreases the lattice thermal conductivity, leading to an improved peak zT of 0.64 at 773 K in SnSe0.9S0.1, which is enhanced compared to the value for SnSe obtained at the same temperature. This study develops a combined composition tuning-nanostructuring approach for optimizing the electrochemical and thermoelectric performance of dual-functional SnSe.
Collapse
Affiliation(s)
- Hong Zhang
- College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
| | - Xiaofang Liu
- College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
| | - Jiacheng Wang
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, China
| | - Bin Zhang
- Analytical and Testing Center, Chongqing University, Chongqing 401331, China
| | - Jie Chen
- School of Materials Science and Engineering, Sichuan University, Chengdu 610064, China
| | - Lei Yang
- School of Materials Science and Engineering, Sichuan University, Chengdu 610064, China
| | - Guoyu Wang
- Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing 400714, China
| | - Meng Li
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, China
| | - Yujie Zheng
- MOE Key Laboratory of Low-grade Energy Utilization Technologies and Systems, CQU-NUS Renewable Energy Materials & Devices Joint Laboratory, School of Energy & Power Engineering, Chongqing University, Chongqing 400044, China
| | - Xiaoyuan Zhou
- Analytical and Testing Center, Chongqing University, Chongqing 401331, China
- College of Physics, Chongqing University, Chongqing 401331, China
| | - Guang Han
- College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China
| |
Collapse
|
18
|
Feng PY, Xia Z, Sun B, Jing X, Li H, Tao X, Mi HY, Liu Y. Enhancing the Performance of Fabric-Based Triboelectric Nanogenerators by Structural and Chemical Modification. ACS APPLIED MATERIALS & INTERFACES 2021; 13:16916-16927. [PMID: 33819011 DOI: 10.1021/acsami.1c02815] [Citation(s) in RCA: 22] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
Fabric-based triboelectric nanogenerators (TENGs) are promising candidates as wearable energy-harvesting devices and self-powered sensors. Booting the power generation performance is an eternal pursuit for TENGs. Herein, an efficient approach was proposed to enhance the triboelectric performance of commercial velvet fabric by enriching the fiber surface with hierarchical structures and amide bonds through chemical grafting of carbon nanotube (CNT) and poly(ethylenimine) (PEI) via a polyamidation reaction. With an optimized modifier concentration, the fabric-based TENG easily achieved over 10 times improvement in output voltage and current at a low modifier content of less than 1 wt %. The modified-fabric-based TENG was fully washable and exhibited excellent robustness and long-term stability. With a maximum power density of 3.2 W/m2 achieved on a 5 × 106 Ω external resistor, the TENG was able to serve as a power source for various small electronics such as pedometer, digital watch, calculator, and digital timer. In addition, the TENG demonstrated capability in self-powered tactile and pressure sensing and promising potential in human-computer interface applications. The approach proposed provides a feasible path for boosting the triboelectric performance of fabric-based TENGs and gives insights into the design of fabric-based nanogenerators and smart textiles.
Collapse
Affiliation(s)
- Pei-Yong Feng
- Key Laboratory of Advanced Packaging Materials and Technology of Hunan Province, Hunan University of Technology, Zhuzhou 412007, China
| | - Zhike Xia
- Key Laboratory of Advanced Packaging Materials and Technology of Hunan Province, Hunan University of Technology, Zhuzhou 412007, China
| | - Binbin Sun
- National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450000, China
| | - Xin Jing
- Key Laboratory of Advanced Packaging Materials and Technology of Hunan Province, Hunan University of Technology, Zhuzhou 412007, China
| | - Heng Li
- Department of Building and Real Estate, Hong Kong Polytechnic University, Hong Kong 518000, China
| | - Xiaoming Tao
- Institute of Textile and Clothing, Hong Kong Polytechnic University, Hong Kong 999077, China
| | - Hao-Yang Mi
- Key Laboratory of Advanced Packaging Materials and Technology of Hunan Province, Hunan University of Technology, Zhuzhou 412007, China
- National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450000, China
| | - Yuejun Liu
- Key Laboratory of Advanced Packaging Materials and Technology of Hunan Province, Hunan University of Technology, Zhuzhou 412007, China
| |
Collapse
|
19
|
Pu X, Wang ZL. Self-charging power system for distributed energy: beyond the energy storage unit. Chem Sci 2020; 12:34-49. [PMID: 34163582 PMCID: PMC8178954 DOI: 10.1039/d0sc05145d] [Citation(s) in RCA: 32] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/17/2020] [Accepted: 11/03/2020] [Indexed: 11/21/2022] Open
Abstract
Power devices for the smart sensor networks of Internet of things (IoT) are required with minimum or even no maintenance due to their enormous quantities and widespread distribution. Self-charging power systems (SCPSs) refer to integrated energy devices with simultaneous energy harvesting, power management and effective energy storage capabilities, which may need no extra battery recharging and can sustainably drive sensors. Herein, we focus on the progress made in the field of nanogenerator-based SCPSs, which harvest mechanical energy using the Maxwell displacement current arising from the variation in the surface-polarized-charge-induced electrical field. Prototypes of different nanogenerator-based SCPSs will be overviewed. Finally, challenges and prospects in this field will be discussed.
Collapse
Affiliation(s)
- Xiong Pu
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences Beijing 100083 China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing 100049 China
- Center on Nanoenergy Research, School of Chemistry and Chemical Engineering, School of Physical Science and Technology, Guangxi University Nanning 530004 China
| | - Zhong Lin Wang
- CAS Center for Excellence in Nanoscience, Beijing Key Laboratory of Micro-Nano Energy and Sensor, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences Beijing 100083 China
- School of Nanoscience and Technology, University of Chinese Academy of Sciences Beijing 100049 China
- CUSPEA Institute of Technology Wenzhou Zhejiang 325024 China
- School of Materials Science and Engineering, Georgia Institute of Technology Atlanta Georgia 30332-0245 USA
| |
Collapse
|
20
|
Patel T, Kim MP, Park J, Lee TH, Nellepalli P, Noh SM, Jung HW, Ko H, Oh JK. Self-Healable Reprocessable Triboelectric Nanogenerators Fabricated with Vitrimeric Poly(hindered Urea) Networks. ACS NANO 2020; 14:11442-11451. [PMID: 32840992 DOI: 10.1021/acsnano.0c03819] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
In recent years, the advent of highly deformable and healable electronics is exciting and promising for next-generation electronic devices. In particular, self-healable triboelectric nanogenerators (SH-TENGs) serve as promising candidates based on the combination of the triboelectric effect, electrostatic induction, and self-healing action. However, the majority of SH-TENGs have been devised with weak polymeric networks that are healed with reversible supramolecular interactions or disulfides, thus resulting in poor mechanical properties and low resistance to creeping. To address this issue, we demonstrate the integration of mechanically strong and self-healable poly(hindered urea) (PHU) network in the fabrication of effective TENGs. The designed PHU network is flexible but shows greater mechanical property of tensile strength as high as 1.7 MPa at break. The network is capable of self-healing quickly and repeatedly as well as being reprocessable under mild conditions, enabling the recovery of triboelectric performances after the complete healing of the damaged surfaces. Furthermore, the interfacial-polarization-induced enhancement of dielectric constant endows our SH-TENG with the highest triboelectric output performance (169.9 V/cm2) among the reported healable TENGs. This work presents an avenue to the development of mechanical energy-harvesting devices and self-powered sensors with excellent stretchability, high recoverability, and good mechanical strength.
Collapse
Affiliation(s)
- Twinkal Patel
- Department of Chemistry and Biochemistry, Concordia University, Montreal, Quebec Canada H4B 1R6
| | - Minsoo P Kim
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Junyoung Park
- Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Tae Hee Lee
- Research Center for Advanced Specialty Chemicals, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44412, Republic of Korea
| | | | - Seung Man Noh
- Research Center for Advanced Specialty Chemicals, Korea Research Institute of Chemical Technology (KRICT), Ulsan 44412, Republic of Korea
| | - Hyun Wook Jung
- Department of Chemical and Biological Engineering, Korea University, Seoul 02841, Republic of Korea
| | - Hyunhyub Ko
- School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 44919, Republic of Korea
| | - Jung Kwon Oh
- Department of Chemistry and Biochemistry, Concordia University, Montreal, Quebec Canada H4B 1R6
| |
Collapse
|
21
|
Han Y, Han Y, Zhang X, Li L, Zhang C, Liu J, Lu G, Yu HD, Huang W. Fish Gelatin Based Triboelectric Nanogenerator for Harvesting Biomechanical Energy and Self-Powered Sensing of Human Physiological Signals. ACS APPLIED MATERIALS & INTERFACES 2020; 12:16442-16450. [PMID: 32172560 DOI: 10.1021/acsami.0c01061] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Triboelectric nanogenerator (TENG) has been proven effective in converting biomechanical energy into electrical energy, which is expected to be a new energy supply device for wearable electronics and can be utilized as a self-powered sensor. In this work, we have developed a flexible, eco-friendly, and multifunctional fish gelatin based triboelectric nanogenerator (FG-TENG) composed of fish gelatin (FG) film and poly(tetrafluoroethylene)/poly(dimethylsiloxane) (PTFE/PDMS) composite film. The open-circuit voltage (Voc), short-circuit current (Isc), and output power density of this FG-TENG could reach up to 130 V, 0.35 μA, and 45.8 μW cm-2, respectively, which were significantly higher than those of TENGs based on other commonly used positive friction materials such as aluminum foil, poly(ethylene terephthalate) (PET), and print paper. The superior performance of the FG-TENG is attributed to the strong electron-donating ability of the FG during the triboelectric process. The generated electric energy was high enough to light up 50 commercial light-emitting diodes (LEDs) directly. Importantly, owing to the high stability and excellent sensitivity of the FG-TENG, it has been used as a self-powered sensor for real-time monitoring of the human physiological signals such as finger touch, joint movement, and respiration. Furthermore, to expand the usages in real-life applications, a foldable FG-TENG was fabricated by adopting the Miura folding to monitor human movements in real time. This work provides an economical, simple, and environmental-friendly approach to fabricate a biomechanical energy harvester, which has a great potential in powering next-generation wearable electronics and monitoring human physiological signals.
Collapse
Affiliation(s)
- Yaojie Han
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
| | - Yufeng Han
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
| | - Xiaopan Zhang
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
| | - Lin Li
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
| | - Chengwu Zhang
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
| | - Jinhua Liu
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
| | - Gang Lu
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
| | - Hai-Dong Yu
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
- Xi'an Institute of Flexible Electronics, MIIT Key Laboratory of Flexible Electronics, Shaanxi Key Laboratory of Flexible Electronics, Xi'an Key Laboratory of Flexible Electronics (KLoFE), Xi'an Key Laboratory of Biomedical Materials & Engineering, Northwestern Polytechnical University, 127 West Youyi Road, Xi'an 710072, P. R. China
| | - Wei Huang
- Institute of Advanced Materials (IAM), Key Laboratory of Flexible Electronics (KLoFE), Jiangsu National Synergetic Innovation Center for Advanced Materials (SICAM), Nanjing Tech University (Nanjing Tech), 30 South Puzhu Road, Nanjing 211816, P. R. China
- Xi'an Institute of Flexible Electronics, MIIT Key Laboratory of Flexible Electronics, Shaanxi Key Laboratory of Flexible Electronics, Xi'an Key Laboratory of Flexible Electronics (KLoFE), Xi'an Key Laboratory of Biomedical Materials & Engineering, Northwestern Polytechnical University, 127 West Youyi Road, Xi'an 710072, P. R. China
| |
Collapse
|
22
|
Sun Y, Zhao X, Zhu G, Li M, Zhang X, Yang H, Lin B. Twisted ladder-like donor-acceptor polymers as electrode materials for flexible electrochromic supercapacitors. Electrochim Acta 2020. [DOI: 10.1016/j.electacta.2019.135495] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
|
23
|
Ojha S, Paria S, Karan SK, Si SK, Maitra A, Das AK, Halder L, Bera A, De A, Khatua BB. Morphological interference of two different cobalt oxides derived from a hydrothermal protocol and a single two-dimensional metal organic framework precursor to stabilize the β-phase of PVDF for flexible piezoelectric nanogenerators. NANOSCALE 2019; 11:22989-22999. [PMID: 31769775 DOI: 10.1039/c9nr08315d] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Here, we have fabricated a piezoelectric nanogenerator (PENG) composed of a Co-oxide (Co3O4) doped electro active PVDF based nanocomposite for efficient piezoelectric energy harvesting application where the Co3O4 inclusion favours nucleation and polar β-phase stabilization in the nanocomposite. The morphological effect on the nucleation and β-phase stabilisation of PVDF has been explored experimentally. The flake-like morphology of Co3O4 nanoparticles, synthesized by using a MOF, has a more effective surface area to nucleate and stabilise the β-phase of PVDF than that of rod-like (hydrothermal) and spherical (commercial) nanoparticles. The PENG with PVDF and the 1.5 wt% MOF based Co3O4 (MPNG) shows an excellent open circuit voltage (∼37 V) and short circuit current (∼0.711 μA) upon human finger tapping. The maximum power density generated from the MPNG is ∼8.55 μW cm-2, which is well sufficient for the driving of portable electronic devices like LEDs, calculator wrist watches, humidity sensors etc. Also, from various easily accessible mechanical and biomechanical energy sources like heel pressing, walking, and machine vibration, the MPNG is capable of harvesting energy.
Collapse
Affiliation(s)
- Suparna Ojha
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Sarbaranjan Paria
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Sumanta Kumar Karan
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Suman Kumar Si
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Anirban Maitra
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Amit Kumar Das
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Lopamudra Halder
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Aswini Bera
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Anurima De
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| | - Bhanu Bhusan Khatua
- Materials Science Centre, Indian Institute of Technology Kharagpur, Kharagpur-721302, West Bengal, India.
| |
Collapse
|
24
|
Zhang Y, Wu J, Cui S, Wei W, Chen W, Pang R, Wu Z, Mi L. Organosulfonate Counteranions-A Trapped Coordination Polymer as a High-Output Triboelectric Nanogenerator Material for Self-Powered Anticorrosion. Chemistry 2019; 26:584-591. [PMID: 31725180 DOI: 10.1002/chem.201904873] [Citation(s) in RCA: 26] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2019] [Revised: 11/13/2019] [Indexed: 11/06/2022]
Abstract
Selection of the friction electrode materials is crucial to the performance of a triboelectric nanogenerator (TENG). In the present study, a metal-organic coordination complex containing organosulfonate counteranions with electron-donating ability was synthesized through the coordination-driven self-assembly approach under mild reaction conditions and was chosen as a positive electrode material to construct a triboelectric nanogenerator, exhibiting high-output performance with a peak value of short circuit current density of 98.6 μA and an output voltage of 1180 V. As a practical application, it was shown to light up 1488 commercial green LEDs and power an anticorrosion system device to protect metals from corrosion.
Collapse
Affiliation(s)
- Yingying Zhang
- Center for Advanced Materials Research, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Jiarui Wu
- Center for Advanced Materials Research, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Siwen Cui
- Center for Advanced Materials Research, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Wutao Wei
- Center for Advanced Materials Research, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| | - Weihua Chen
- College of Chemistry and Molecular Engineering, Zhengzhou University, Henan, 450001, P. R. China
| | - Rui Pang
- International Laboratory for Quantum Functional Materials of Henan and School of Physics and Engineering, Zhengzhou University, Zhengzhou, 450001, P. R. China
| | - Zijie Wu
- North West Composites Centre, School of Materials, University of Manchester, Manchester, M13 9PL, UK
| | - Liwei Mi
- Center for Advanced Materials Research, Zhongyuan University of Technology, Zhengzhou, 450007, P. R. China
| |
Collapse
|
25
|
Zhou T, Wang JW, Huang M, An R, Tan H, Wei H, Chen ZD, Wang X, Liu X, Wang F, He J. Breathable Nanowood Biofilms as Guiding Layer for Green On-Skin Electronics. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2019; 15:e1901079. [PMID: 31165570 DOI: 10.1002/smll.201901079] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/27/2019] [Revised: 05/01/2019] [Indexed: 06/09/2023]
Abstract
Thin-film electronics are urged to be directly laminated onto human skin for reliable, sensitive biosensing together with feedback transdermal therapy, their self-power supply using the thermoelectric and moisture-induced-electric effects also has gained great attention (skin and on-skin electronics (On-skinE) themselves are energy storehouses). However, "thin-film" On-skinE 1) cannot install "bulky" heatsinks or sweat transport channels, but the output power of thermoelectric generator and moisture-induced-electric generator relies on the temperature difference (∆T ) across generator and the ambient humidity (AH), respectively; 2) lack a routing and accumulation of sweat for biosensing, lack targeted delivery of drugs for precise transdermal therapy; and 3) need insulation between the heat-generating unit and heat-sensitive unit. Here, two breathable nanowood biofilms are demonstrated, which can help insulate between units and guide the heat and sweat to another in-plane direction. The transparent biofilms achieve record-high transport// /transport⊥ (//: along cellulose nanofiber alignment direction, ⊥: perpendicular direction) of heat (925%) and sweat (338%), winning applications emphasizing on ∆T/AH-dependent output power and "reliable" biosensing. The porous biofilms are competent in applications where "sensitive" biosensing (transporting// sweat up to 11.25 mm s-1 at the 1st second), "insulating" between units, and "targeted" delivery of saline-soluble drugs are of uppermost priority.
Collapse
Affiliation(s)
- Tianle Zhou
- School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China
- Key Laboratory for Soft Chemistry and Functional Materials of Ministry Education, Nanjing University of Science and Technology, Nanjing, 210094, China
- Jiangsu Key Laboratory of Advanced Micro & Nano Materials and Technology, Nanjing University of Science and Technology, Nanjing, 210094, China
- NTNU Nanomechanical Lab, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, 7491, Norway
| | - Jin-Wen Wang
- School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Ming Huang
- School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China
- Jiangsu Key Laboratory of Advanced Micro & Nano Materials and Technology, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Rong An
- Jiangsu Key Laboratory of Advanced Micro & Nano Materials and Technology, Nanjing University of Science and Technology, Nanjing, 210094, China
- Herbert Gleiter Institute of Nanoscience, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Huaping Tan
- School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China
- Jiangsu Key Laboratory of Advanced Micro & Nano Materials and Technology, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Hao Wei
- School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Zheng-Dong Chen
- School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Xin Wang
- Key Laboratory for Soft Chemistry and Functional Materials of Ministry Education, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Xiaoheng Liu
- Key Laboratory for Soft Chemistry and Functional Materials of Ministry Education, Nanjing University of Science and Technology, Nanjing, 210094, China
| | - Feng Wang
- NTNU Nanomechanical Lab, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, 7491, Norway
| | - Jianying He
- NTNU Nanomechanical Lab, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, 7491, Norway
| |
Collapse
|