Icephobic Durability of Branched PDMS Slippage Coatings Co-Cross-Linked by Functionalized POSS

Well-Tailored Norbornene-Based Fluorinated Copolymers toward Modulating Icephobicity and Mechanical Robustness

Well-tailored construction of icephobic surfaces with mechanical robustness and investigation of the structure-property relationships at the molecular level are highly desirable. Herein, a series of norbornene-based fluorinated polyolefin copolymers (FPOR-x) with varying norbornenyl dodecafluoroheptyl ester (NDFHE) molar fractions (0-100 mol %) were well-designed and fabricated via living ring-opening metathesis polymerization (ROMP) employing NDFHE and norbornenyl pentafluorophenyl ester (NPFPE) as the soft and hard segments, respectively. The mechanical and icephobic properties of the fluorinated copolymers can be regulated by adjusting the soft NDFHE contents. As a result, the well-designed norbornene-based copolymers exhibited a wide range of tunable mechanical properties, including tensile strength ranging from 0.2 to 26.4 MPa, elastic modulus ranging from 0.6 to 593.7 MPa, and breaking elongations ranging from 5718.7% to 3.7%, correlating with the proportion of soft NDFHE content. Furthermore, the synergistic interplay between soft and hard segments, particularly the hardness in the majority and softness in the minority or vice versa, could achieve a significant difference in the local modulus and enhance the propagations of cracks within the three-phase regions (soft regions/hard regions/ice), ultimately leading to a significant reduction in ice shear strength. Notably, FPOR-25% with a tensile strength of 12.0 MPa and an elastic modulus of 227.5 MPa exhibited a remarkably low ice shear strength of 57.7 kPa. This study not only highlights the relationship between the polymer molecular structure and surface icephobic properties but also breaks the limitations of icephobic surfaces with a low modulus.

Icephobic Durability of Molecular Brush-Structured PDMS Soft Coatings

The accumulation of ice can pose numerous inconveniences and potential hazards, profoundly affecting both human productivity and daily life. To combat the challenges posed by icing, extensive research efforts have been dedicated to the development of low-ice adhesion surfaces. In this study, we harness the power of molecular dynamics simulations to delve into the intricate dynamics of polymer chains and their role in determining the modulus of the material. We present a novel strategy to prepare ultralow-modulus poly(dimethylsiloxane) (PDMS) elastomers with a molecular brush configuration as icephobic materials. The process involves grafting monohydride-terminated PDMS (H-PDMS) as side chains onto backbone chain PDMS with pendant vinyl functional groups to yield a molecular brush structure. The segments of this polymer structure effectively restrict interchain entanglement, thereby rendering a lower modulus compared to traditional linear structures at an equivalent cross-linking density. The developed soft coating exhibits a remarkably ultralow ice adhesion strength of 13.1 ± 1.1 kPa. Even after enduring 50 cycles of icing and deicing, the ice adhesion strength of this coating steadfastly stayed below 16 kPa, showing no notable increase. Importantly, the molecular brush coating applied to glass demonstrated an impressive light transmittance of 92.1% within the visible light spectrum, surpassing the transmittance of bare glass, which was measured at 91.3%. This icephobic coating with exceptional light transmittance offers a wide range of applications and holds significant potential as a practical icephobic material.

Phase change surfaces with porous metallic structures for long-term anti/de-icing application

HYPOTHESIS

Ice mitigation has received increasing attention due to the severe safety and economic threats of icing hazards to modern industries. Slippery icephobic surface is a potential ice mitigation approach due to its ultra-low ice adhesion strength, great humidity resistance, and effective delay of ice nucleation. However, this approach currently has limited practical applications because of serious liquid depletion in the icing/de-icing process.

EXPERIMENTS

A new strategy of phase change materials (PCM)-impregnation porous metallic structures (PIPMSs) was proposed to develop phase changeable icephobic surfaces in this study, and aimed to solve the rapid depletion via the phase changeable interfacial interactions.

FINDINGS

Evaluation of surface icephobicity and interfacial analysis proved that the phase changeable surfaces (PIPMSs) worked as an effective and durable icephobic platform by significantly delaying ice nucleation, providing long-term humid tolerance, low ice adhesion strength of as-prepared samples (less than 5 kPa), and signally improved maintaining capacity of impregnated PCMs (less than 10 % depletion) after 50 icing/de-icing cycles. To explore the interfacial responses, phase change models consisting of the unfrozen quasi-liquid layer and solid lubricant layer at the ice/PIPMSs interfaces were established, and the involved icephobic mechanisms of PIPMSs were studied based on the analysis of interfacial interactions.

Multifunctional Anti-Icing Gel Surface with Enhanced Durability

Materials with low ice adhesion and long-lasting anti-icing properties remain an ongoing challenge in ultralow temperature environments (≤-30 °C). This study presents a gel material consisting of a polymer matrix (copolymer of polyurethane and acrylamide) and an anti-icing agent, ethylene glycol (EG), designed for anti-icing applications at ultralow temperatures. The surface shows a prolonged droplet freezing delay of ca. 322 s at -30 °C and frost resistance properties. It also exhibits an ice adhesion strength of 1.1 kPa at -10 °C and 39.8 kPa at -50 °C, resulting from the interaction between EG and water molecules that hinders the crystallization of ice as well as the significant mismatch between elastic gel and ice. In addition, the gel surface exhibits favorable anti-icing durability, with an ice adhesion strength below 20.0 kPa after 25 icing/deicing cycles and mechanical scratch tests. The gel demonstrates remarkable thermal durability, achieved through the H-bonds between the EG and polymer matrix. The H-bonds further enhance the anti-icing performance, thereby remarkably decreasing EG depletion and improving anti-icing durability. Overall, these properties suggest the potential application of this gel material in harsh environments including polar regions.

On the Durability of Icephobic Coatings: A Review

Ice formation and accumulation on surfaces has a negative impact in many different sectors and can even represent a potential danger. In this review, the latest advances and trends in icephobic coatings focusing on the importance of their durability are discussed, in an attempt to pave the roadmap from the lab to engineering applications. An icephobic material is expected to lower the ice adhesion strength, delay freezing time or temperature, promote the bouncing of a supercooled drop at subzero temperatures and/or reduce the ice accretion rate. To better understand what is more important for specific icing conditions, the different types of ice that can be formed in nature are summarized. Similarly, the alternative methods to evaluate the durability are reviewed, as this is key to properly selecting the method and parameters to ensure the coating is durable enough for a given application. Finally, the different types of icephobic surfaces available to date are considered, highlighting the strategies to enhance their durability, as this is the factor limiting the commercial applicability of icephobic coatings.

Microporous metallic scaffolds supported liquid infused icephobic construction

HYPOTHESIS

Ice accretion on component surfaces often causes severe impacts or accidents. Liquid-infused surfaces (LIS) have drawn much attention as icephobic materials for ice mitigation in recent years due to their outstanding icephobicity. However, the durability of LIS constructions remains a big challenge, including mechanical vulnerability and rapid depletion of lubricants. The practical applications of LIS materials are significantly restrained, and the full potential of LIS for ice prevention has yet to be demonstrated.

EXPERIMENTS

A universal approach was proposed to introduce microporous metallic scaffolds in the LIS construction to increase the applicability and durability, and to prompt the potential of LIS for ice mitigation. Microporous Ni scaffolds were chosen to integrate with polydimethylsiloxane modified by silicone oil addition.

FINDINGS

The new LIS construction demonstrated significantly improved durability in icing/de-icing cyclic test, and it also offered a solution for the rapid oil depletion by restraining the deformation of the matrix material. Low ice adhesion strength could be maintained via a micro-crack initiation mechanism. The results indicated that the multi-phase LIS construction consisting of microporous Ni scaffolds effectively addressed the shackles of the icephobicity deterioration of LIS materials, confirming a new design strategy for the R&D of icephobic surfaces.

Icephobicity of Hierarchically Rough Aluminum Surfaces Sequentially Coated with Fluoroalkyl and PDMS Alkoxysilanes

Superhydrophobic surfaces fabricated by grafting 1H,1H,2H,2H-heptadecafluorodecyl trimethoxysilane (FD-TMS) and polydimethylsiloxane triethoxysilane (PDMS-TES) onto a nano-micro hierarchical aluminum (Al) surface are considered to possess substantial anti-icing functionality, with delayed freezing and low ice-adhesion strength (IAS). Verifying the impacts of PDMS and the synergism of PDMS and FD on the anti-icing performance is the goal of this study. Roughness, one of the prerequisites for superhydrophobicity, was obtained by etching Al substrates in aqueous HCl, followed by immersion in boiling water. FD-TMS and PDMS-TES were then coated on the rough Al substrates layer by layer; a congener coated with a single layer was also prepared for comparison. The FD-PDMS_1.92 (1.92 wt.%) coating, in which FD-TMS and PDMS-TES were used as primary and secondary coating materials, respectively, exhibited superior icephobicity, with the lowest IAS of 28 kPa under extremely condensing weather conditions (-20 °C and 70% relative humidity, RH) and the longest freezing delay time of 230 min (at -18 °C). These features are attributed to the incorporation of a dense coating layer with a low-surface-tension FD and the high mobility of PDMS, which lowered the contact area and interaction between the ice and substrate. The substrate coated with FD-PDMS_1.92 exhibited improved durability with an IAS of 63 kPa after 40 icing/melting cycles, which is far less than that achieved with the FD single-layer coating.

Crack-Initiated Durable Low-Adhesion Trilayer Icephobic Surfaces with Microcone-Array Anchored Porous Sponges and Polydimethylsiloxane Cover

Reducing unfavorable ice accretion on surfaces exposed in cold environment requires effective passive anti-icing/deicing techniques. Icephobic surfaces are widely applied on various infrastructures due to their low ice adhesion strength and flexibility, whereas their poor mechanical durability, common liquid infusion, weak resistance to contamination, and low bonding strength to substrates are the major remaining challenges. According to the fracture mechanics of ice layer, initiating cracks at the ice-solid interfaces via the proper design of internal structures of icephobic materials is a promising way to icephobicity. Herein, a crack initiating icephobic surface with porous PDMS sponges sandwiched between a protective, dense PDMS layer and a textured metal microstructure was proposed and fabricated. The combination of high- and low- stiffness PDMS layers anchored by the structured metal surface give the sandwich-like structure excellent icephobicity with both high durability and low ice adhesion (5.3 kPa in the icing-deicing cycles). The porosity and the elastic modulus of the PDMS sponges and the periodicity of the metal surface structures can both be tailored to realize enhanced icephobicity. The sandwich-like icephobic surface remained insignificantly changed under solid particle impacting and the durability characterized via linear abrasion tests was elevated compared with PDMS coating on flat metal surfaces. Additionally, the trilayer icephobic surface possesses durability, low ice adhesion strength, and improved resistance to contamination and is applicable on various surfaces.

Photo-Thermal Superhydrophobic Sponge for Highly Efficient Anti-Icing and De-Icing

Ice accretion always brings much inconvenience in the field of production and life. How to anti-ice or de-ice easily on solid surfaces becomes research focus in the engineering material fields. In this work, a kind of photo-thermal superhydrophobic polyurethane sponge (PSP-SPONGE) was developed by depositing Fe₃O₄ nanoparticles and polydopamine and simple fluorination treatment to realize anti-icing and de-icing fast under faint sunlight irradiation. Utilizing the thermal insulation of porous PSP-SPONGE, the photo-thermal energy was located at the sunlight irradiation area, which heated PSP-SPONGE surface rapidly under sunlight irradiation in cold surroundings. Water droplets on PSP-SPONGE surface would never freeze under faint 0.3 kW/m² ("0.3 sun") sunlight illumination in -30 °C damp surroundings, and the ice melts entirely within 18 min under "1 sun" illumination. Furthermore, PSP-SPONGE has excellent self-cleaning and self-healing properties that can cope with the complex and volatile natural environment to guarantee durable anti-icing and de-icing performances. The simulated outdoor snow removal test also proved that snow on PSP-SPONGE surface could melt under "0.5 sun" sunlight illumination in -30 °C damp surroundings. The PSP-SPONGE fabricated with simple preparation and easy access has wide application prospects in anti-icing and de-icing.

Icephobic Coating through a Self-Formed Superhydrophobic Surface Using a Polymer and Microsized Particles

Icephobic coatings have been extensively studied for decades to overcome the potential damage associated with ice formation in various devices that are operated under harsh weather conditions. Superhydrophobic surface coatings have been applied for icephobic coating applications owing to their low surface energy. In this study, an icephobic coating of a self-formed superhydrophobic surface using polydimethylsiloxane (PDMS) and SiO₂ powder was investigated. The effect of superhydrophobicity on icephobicity was determined by varying the experimental parameters. Polyvinylidene fluoride (PVDF) was added to the PDMS solution to improve the mechanical properties of the icephobic layer. The PDMS-PVDF solution also showed a self-formation behavior into a superhydrophobic surface. In addition, the icephobicity and mechanical properties of the PDMS-PVDF mixture coating improved because of the multilevel nanostructure formed by physical and chemical interactions between the mixture and SiO₂ powder. We believe that the proposed approach will be a suitable candidate for various practical applications of icephobicity and a model system to understand the correlation between superhydrophobicity and icephobicity.

Enhanced Surface Icephobicity on an Elastic Substrate

Ice accumulation on exposed surfaces is unavoidable as time elapses and the temperature decreases sufficiently. To mitigate icing problems, various types of icephobic substrates have been rationally designed, including superhydrophobic substrates (SHSs), aqueous lubricating layers, organic lubricating layers, organogels, polyelectrolyte brush layers, electrolyte-based hydrogels, elastic substrates, and multicrack initiator-promoted surfaces. Among these surfaces, elastic substrates show excellent enhanced surface icephobicity during dynamic processes (i.e., water-impacting and de-icing tests). Herein, we summarize recent progress in elastic icephobic substrates and discuss the reasons that surface icephobicity can be enhanced on elastic substrates in terms of enhanced water repellency and further lowering the ice adhesion strength. For enhanced water repellency, we focus on reducing the contact time of water impacting such that water droplets can be easily shed from an elastic substrate before ice occurs. Reducing the contact time of water impacting various substrates (i.e., micro/nanostructured rigid SHSs, macrotextured rigid SHSs, and elastic SHSs) is discussed, followed by exploring their mechanisms. We argue that the ice adhesion strength can be further lowered on an elastic substrate by rationally tuning the elastic modulus and surface textures (i.e., surface textured and hollow subsurface textured) and combining elastic substrate with other passive anti-icing strategies (or functioning passive icephobic substrates with an electrothermal or photothermal stimulus). In short, the introduction of an elastic substrate into a passive or active icephobicity surface opens an avenue toward designing a versatile icephobic surface, providing great potential for outdoor anti-icing applications.

Design of Icephobic Surfaces by Lowering Ice Adhesion Strength: A Mini Review

Ice accretion can lead to severe consequences in daily life and sometimes catastrophic events. To mitigate the hazard of icing, passive icephobic surfaces have drawn widespread attentions because of their abilities in repelling incoming water droplets, suppressing ice nucleation and/or lowering ice adhesion strength. As time elapses and temperature lowers sufficiently, ice accretion becomes inevitable, and a realistic roadmap to surface icephobicity for various outdoor anti-icing applications is to live with ice but with the lowest ice adhesion strength. In this review, surfaces with icephobicity are critically categorized into smooth surfaces, textured surfaces, slippery surfaces and sub-surface textured surfaces, and discussed in terms of theoretical limit, current status and perspectives. Particular attention is paid to multiple passive anti-icing strategies combined approaches as proposed on the basis of icephobic surfaces. Correlating the current strategies with one another will promote understanding of the key parameters in lowering ice adhesion strength. Finally, we provide remarks on the rational design of state-of-the-art icephobic surfaces with low ice adhesion strength.

Effective Approach to Render Stable Dynamic Omniphobicity and Icephobicity to Ultrasmooth Metal Surfaces

Surface modifications for easy removal of liquids and solids from various metal surfaces are much less established than for silicon (Si) or glass substrates. Trimethylsiloxy-terminated polymethylhydrosiloxane (PMHS) is very promising because it can be directly immobilized covalently to a wide variety of metal surfaces by simply heating neat PMHS liquid, resulting in a film showing excellent dynamic omniphobicity. However, such PMHS films are easily degraded by hydrolytic attack in an aqueous environment. In this study, we have successfully improved the hydrolytic stability of the PMHS-covered ultrasmooth metal (Ti, Al, Cr, Ni, and Cu) surfaces by end-capping of the residual Si-H groups of the PMHS films with vinyl-terminated organosilanes, for example, trimethylvinylsilane (TMVS), through a platinum-catalyzed hydrosilylation reaction. The resulting TMVS-capped PMHS film surfaces showed significantly greater stability even after submersion in water for 6 days, with their excellent dynamic dewetting behavior toward water, toluene, n-hexadecane, and ethanol changing little. In addition, they also showed reasonable anti-icing (icephobic) properties with low ice-adhesion strength of less than 50 kPa even after 20 cycles of testing at -15 °C.

A Simple Approach for Flexible and Stretchable Anti-icing Lubricant-Infused Tape

Unwanted icing has major safety and economic repercussions on human activities, affecting means of transportation, infrastructures, and consumer goods. Compared to the common deicing methods in use today, intrinsically icephobic surfaces can decrease ice accumulation and formation without any active intervention from humans or machines. However, such systems often require complex fabrication methods and can be costly, which limits their applicability. In this study, we report the preparation and characterization of several slippery lubricant-infused porous surfaces (SLIPSs) realized by impregnating with silicone oil a candle soot layer deposited on double-sided adhesive tape. Despite the use of common household items, these SLIPSs showed anti-icing performance comparable to other systems described in the literature (ice adhesion < 20 kPa) and a good resistance to mechanical and environmental damages in laboratory conditions. The use of a flexible and functional substrate as tape allowed these devices to be stretchable without suffering significant degradation and highlights how these systems can be easily prepared and applied anywhere needed. In addition, the possibility of deforming the substrate can "allow" the application of SLIPS technology in mechanical ice removal methodologies, drastically incrementing their performance.

Improving Anti-Icing and De-Icing Performances via Thermal-Regulation with Macroporous Xerogel

The accumulation of ice in winter has brought many problems in industrial production and everyday life, and how to prevent icing or remove ice rapidly has aroused great attention from researchers in recent years. In this work, we demonstrated a strategy of using a superhydrophobic photothermal and thermal isolation macroporous xerogel (PMX) to delay icing and remove ice efficiently under faint sunlight irradiation. An oriented macroporous xerogel was prepared by an ice templating method, and multi-walled carbon nanotubes acting as the photothermal genesis component under sunlight irradiation were introduced into the xerogel. After fluorination, the PMX presented a robust water repellency and delayed icing. More importantly, numerous macropores in the PMX matrix acted as the thermal barrier that can restrict heat transmission to surroundings at maximum, which guarantees efficient anti-icing and de-icing in low temperature. Water on the PMX surface can never freeze at -30 °C under 0.25 kW/m² ("0.25 sun") sunlight irradiation. The outdoor experiment also has confirmed the availability of PMX in a natural winter environment. The PMX integrated with thermogenesis and thermo-isolation functions provides a new route for highly efficient anti-icing and de-icing.

Applications of Hybrid Polymers Generated from Living Anionic Ring Opening Polymerization

Increasingly precise control of polymer architectures generated by "Living" Anionic Ring-Opening Polymerization (Living AROP) is leading to a broad range of commercial advanced material applications, particularly in the area of siloxane macromers. While academic reports on such materials remain sparse, a significant portion of the global population interacts with them on a daily basis-in applications including medical devices, microelectronics, food packaging, synthetic leather, release coatings, and pigment dispersions. The primary driver of this increased utilization of siloxane macromers is their ability to incorporate the properties of silicones into organic structures in a balanced manner. Compared to organic polymers, the differentiating properties of silicones-low Tg, hydrophobicity, low surface energy, and high free molal space-logically lend themselves to applications in which low modulus, release, permeability to oxygen and moisture, and tactile interaction are desired. However, their mechanical, structural and processing properties have until recently precluded practical applications. This review presents applications of "Living" AROP derived polymers from the perspective of historical technology development. Applications in which products are produced on a commercial scale-defined as not only offered for sale, but sold on a recurrent basis-are emphasized. Hybrid polymers with intriguing nanoscale morphology and potential applications in photoresist, microcontact printing, biomimetic soft materials, and liquid crystals are also discussed. Previously unreported work by the authors is provided in the context of this review.

Low Ice Adhesion Surfaces Based on Flexible Fluorinated Polymers with a Polynorbornene Backbone

Realizing icephobic surfaces with low ice adhesion and durability continues to be fascinating as well as challenging. Herein, a norbornene-based fluorinated polymer (NFP) with high flexibility and high tensile strength is designed and fabricated using a fluorinated side chain and a norbornene backbone, displaying low ice shear strength less than 20 kPa and excellent durability. Experimental and theoretical analyses show that the flexibility of the polymer chains and the synergistic macromolecular aggregation of the fluorinated side groups and the norbornene backbone play key roles in the excellent surface icephobic properties of the NFP films. Moreover, we also develop a facile approach to the design of durable icephobic slippery surfaces, which possess remarkable icephobic performance. This study not only sheds light on the relationship between the polymer molecular structure and surface icephobic properties but also provides a new avenue to conveniently realize anti-icing coatings.

A high throughput tensile ice adhesion measurement system

A prerequisite for designing materials with low adhesion to ice is to accurately measure the ice adhesion strength of the surface. The majority of studies in this field have typically focused on manipulating and measuring the adhesion strength of different materials under shear stress. Among them, elastomers have proven to be promising ice-phobic surfaces because they enable interfacial cavitation, a tension-driven surface instability. In this work, a high throughput, low cost device is designed to measure the tensile ice adhesion strength of different surfaces. The design and construction of the tensile ice adhesion measurement system is presented, along with the reasoning for the design decisions. The performance of the setup is characterized using experimental trials varying parameters such as temperature, pull-off speed, thickness of the substrate, and ice/substrate interfacial area, to verify the precision of the measurements.

Antifogging/Antibacterial Coatings Constructed by N-Hydroxyethylacrylamide and Quaternary Ammonium-Containing Copolymers

Endoscopic surgery has gained widespread applications in various clinical departments, and endoscope surfaces with antifogging and antibacterial properties are essential for elaborate procedures. In this work, novel antifogging/antibacterial coatings were developed from a cationic copolymer and a hydrophilic copolymer, polyhedral oligomeric silsesquioxane-poly(quaternary ammonium compound-co-2-aminoethyl methacrylate hydrochloride) [POSS-P(QAC-co-AEMA)] and poly(N-hydroxyethylacrylamide-co-glycidyl methacrylate) [P(HEAA-co-GMA)] via a facile and green blending method. Such transparent coatings showed excellent antifogging performance under both in vitro and in vivo fogging conditions, mainly attributed to the high water-absorbing capability of HEAA and QAC. Antibacterial assays proved that the blending coatings had a superior antibacterial property, which could be improved with the proportion of POSS-P(QAC-co-AEMA) because of the bactericidal efficiency of cationic QAC. Meanwhile, owing to the high hydratability of HEAA, the blending coatings exhibited a bacteria-repelling property. By simply tuning the blending ratio of POSS-P(QAC-co-AEMA) and P(HEAA-co-GMA), the comprehensive bacteria-killing and bacteria-repelling properties of the coatings were achieved. Moreover, after incubating with red blood cells, the prepared blending coatings presented a lower hemolytic rate of less than 5%. The findings provided a potential means for addressing the challenge of fogging and bacterial contamination occurring in endoscopic lenses and other medical devices.

Icephobic, Pt-Cured, Polydimethylsiloxane Nanocomposite Coatings

To explore novel coatings with potential for easy release of ice (icephobicity), a series of platinum-cured silicone coatings was prepared incorporating SYL-OFF 7210, designated MQ-R, as a nanoscale reinforcing component. These optically transparent coatings are designated according to cure temperature and MQ-R wt %, for example, Pt-PDMS(25)-20 for 25 °C cure and 20 wt % MQ-R. Surface characterization included dynamic contact angles and morphology by atomic force microscopy. Bulk characterization was accomplished with stress-strain measurements at 25 °C and dynamic mechanical analysis from -110 to 150 °C. Ice adhesion tests at -10 °C showed modulus had a dominant effect in increasing τ_ice, the peak removal force. At -30 °C, storage modulus was greater for coatings cured at 100 °C compared to 25 °C, but ice removal tests at -30 °C (-22 °F) consistently showed τ_ice for Pt-PDMS(100) MQ-R compositions was less than τ_ice for corresponding Pt-PDMS(25) coatings. This unexpected result was explained by proposing that supercooled water at hydrophilic interfacial sites (-10 °C) does not impede ice removal but frozen water pins ice at -30 °C. Interestingly, MQ-R was found to be a reactive filler that increased modulus after 100 °C cure especially for Pt-PDMS(100)-30 (3 MPa) and Pt-PDMS(100)-40 (5 MPa). In summary, by virtue of resistance to ice adhesion Pt(PDMS) coatings with low MQ-R content have potential for conferring energy savings and safety while high MQ-R content results in noteworthy mechanical properties.

Liquid infused surfaces with anti-icing properties

Ice accretion on solid surfaces, a ubiquitous phenomenon that occurs in winter, brings much inconvenience to daily life and can even cause serious catastrophes. Icephobic surfaces, a passive way of processing surfaces to prevent surface destruction from ice accumulation, have attracted much attention from scientists because of their special ice-repellent properties, and many efforts have been made to rationally design durable icephobic coatings. This review is aimed at providing a brief and crucial overview of ice formation processes and feasible de-icing strategies. Here, the excellent anti-icing performance of liquid infused surfaces (LIS) inspired from Nepenthes is emphatically introduced. After a short introduction, the recent progresses in ice nucleation theory and ice adhesion decrease mechanism are comprehensively reviewed to gain a general understanding of the long freeze process and low ice adhesion on LIS. Subsequently, the anti-icing performance of LIS is systematically evaluated from four aspects regarding water repellence, condensation-frosting, long freeze process, and low ice adhesion. Finally, this review focuses on discussing the advantages and disadvantages of LIS and the potential measures to eliminate and alleviate these drawbacks.

Epidermal Gland Inspired Self-Repairing Slippery Lubricant-Infused Porous Coatings with Durable Low Ice Adhesion

The limited durability of slippery lubricant-infused porous surfaces (SLIPS) restricts their practical applications. Inspired by the epidermal glands of skins, we developed a facile approach to durable SLIPS with gland-like storage and release functions for icephobicity. By introducing a hybrid surfactant as a lubricant into the polydimethylsiloxane (PDMS) matrix, lubricant capsules were formed and mono-dispersed in the matrix, working as gland-like structures to release lubricant. The obtained SLIPS showed durable low ice adhesion strength and thermal durability simultaneously. In detail, the enhanced durability for icephobicity was demonstrated by 20 icing/deicing tests, in which the lubricant remains on the surface; the coatings showed negligible weight loss when stored at 100 °C for 60 h, displaying pronounced thermal durability of the slippery effect. Our current strategy sheds new light on a facile fabrication of mechanically and thermally durable SLIPS for icephobicity.