Surface Ligand Engineering for Efficient Perovskite Nanocrystal-Based Light-Emitting Diodes

Greatly enhanced ultrafast optical absorption nonlinearities of pyridyl perovskite nanocrystals axially modified by star-shaped porphyrins

The long-chain ligands and weak charge-transport capacity of perovskite nanocrystals (NCs) always hinder their optoelectronic applications. Our study proposes an effective strategy to unlock the optimized nonlinear optical (NLO) properties of perovskite via aromatic ligand-exchange plus porphyrin-axial-coordination. The synthesized porphyrin-pyridine dual-modified CsPbBr3-NC hybrid material, fabricated using 4-(aminomethyl)pyridine (PyMA) and a novel star-shaped zinc-porphyrin trisubstituted triazacoronene compound (ZnPr), exhibits excellent NLO absorption performance under femtosecond (fs) laser irradiation in the visible to near-infrared range. Specifically, its nonlinear absorption coefficient is 10 times higher than that of the pristine CsPbBr3-NC and it also possesses an outstanding optical limiting (OL) capability with an OL threshold as low as 1.8 mJ cm-2. The modification of PyMA ligands reduces the trap state density on the perovskite surface and promotes the electronic coupling between the NC lattices. With the aid of PyMA coordinating with the Zn atoms in ZnPr, large-size planar porphyrins are anchored on the perovskite surface from the axial position, which may enhance the ligand protection capability and thereby significantly facilitate the charge transport between porphyrin components and perovskite NCs. The above two-step modification synergistically contributes to the prominent NLO performance. Our work affords a new viable paradigm for developing multi-field and high-performance perovskite NC photonic materials and devices.

Surface passivation strategies for CsPbBr3 quantum dots aiming at nonradiative suppression and enhancement of electroluminescent light-emitting diodes

With many fascinating characteristics, such as color-tunability, narrow-band emission, and low-cost solution processability, all-inorganic lead halide perovskite quantum dots (QDs) have attracted keen attention for electroluminescent light-emitting diodes (QLEDs) and display applications. However, the performance of perovskite QLED devices is intrinsically limited by the inefficient electrical carrier transport capacity. Herein, one facile but effective method is proposed to enhance the perovskite QLED performance by incorporating a short carbon chain ligand of 2-phenethylammonium bromide (PEABr) to passivate the CsPbBr3 QD surface. With the PEABr ligand, the Br- vacancies are passivated, which could eliminate nonradiative recombination of perovskite QDs; thus their optical properties are enhanced. Meanwhile, PEABr can interact with perovskite QDs to adjust the perovskite film morphology, resulting in low current leakage and efficient electron injection. After the PEABr treatment, the CsPbBr3 QD film exhibits strong green emission located at 516 nm, with an average photoluminescence lifetime of 45.71 ns and a photoluminescence quantum yield of up to 78.64%. In addition, the surface roughness of the CsPbBr3 QD film is reduced from 3.61 nm to 1.38 nm, which is essential to prepare a QD film with high surface coverage. As a result, the QLED device with PEABr treated CsPbBr3 QDs exhibits a maximum current efficiency of 32.69 cd A-1 corresponding to an external quantum efficiency of 9.67%, 3.88-fold higher than that of the control device (pure QDs as an emission layer). This research provides an effective strategy for the improvement of the perovskite QLED performance and may be helpful for extending their actual applications.

Surface modification unleashes light emitting applications of APbX3 perovskite nanocrystals

Engineering the surface of metal halide perovskite nanocrystals (MHPNCs) is crucial for optimizing their optical properties, repairing surface defects, enhancing quantum yield, and ensuring long-term stability. These enhancements make surface-engineered MHPNCs ideal for applications in light-emitting devices (LEDs), displays, lasers, and photodetectors, contributing to energy efficiency. This article delves into an introduction to MHPNCs, their structure and types, particularly the ABX3 type (where A represents monovalent organic/inorganic cations, B represents divalent metal ions mainly Pb metal, and X represents halide ions), synthesis methods, unique optical properties, surface modification techniques using various agents (particularly inorganic molecules/materials, organic molecules, polymers, and biomolecules) to tune optical properties and applications in the aforementioned light-emitting technologies, challenges and opportunities, including advantages and disadvantages of surface-modified APbX3 MHPNCs, and a summary and future outlook. This article explores surface modification strategies to improve the optical performance of MHPNCs and aims to inspire advancements in light emitting applications. Importantly, the challenges and opportunities section of this article will illuminate the path to overcoming obstacles, providing invaluable insights for researchers in this field. This in-depth review explores the surface engineering of MHPNCs for light-emitting applications, highlighting their notable advantages and addressing ongoing challenges. By delving deep into various surface modification strategies, this article aims to revolutionize MHPNC-based light-emitting applications, setting a new benchmark in the field. This paves the way for revolutionary advancements, maximizing the capabilities of surface-engineered MHPNCs and heralding a transformative era in precise light-emitting research.

Assembly-promoted repeatable enhancement of photoluminescence from cesium lead tribromide nanocubes under light illumination

A repeatable enhancement of the photoluminescence (PL) from CsPbBr3 nanocubes (NCs) is promoted by the assembling of NCs. The PL quantum yield (QY) of ordered NC arrays increases with photoirradiation and decreases in the dark. The repeatable enhancement of the PLQY cannot be observed from isolated NCs. The nanospaces between NCs in the ordered arrays allow a reversible change in thermally stimulated desorption and photo-induced adsorption of surface ligands that affect the PLQY.

Interactive Deformable Colored Sound Display Achieved with Electrostrictive Fluoropolymer and Halide Perovskite

The association of color and sound helps human cognition through a synergetic effect like intersensory facilitation. Although soft human-machine interfaces (HMIs) providing unisensory expression have been widely developed, achieving synchronized optic and acoustic expression in one device system has been relatively less explored. It is because their operating principles are different in terms of materials, and implementation has mainly been attempted through structural approaches. Here, a deformable sound display is developed that generates multiple colored lights with large sound at low input voltage. The device is based on alternating-current electroluminescence (ACEL) covered with perovskite composite films. A sound wave is created by a polymer matrix of the ACEL, while simultaneously, various colors are produced by the perovskite films and the blue electroluminescence (EL) emitted from the phosphors in the ACEL. By patterning different colored perovskite films onto the ACELs, associating the color and the sound is successfully demonstrated by a piano keyboard and a wearable interactive device.

Ligand Engineering of Inorganic Lead Halide Perovskite Quantum Dots toward High and Stable Photoluminescence

The ligand engineering of inorganic lead halide perovskite quantum dots (PQDs) is an indispensable strategy to boost their photoluminescence stability, which is pivotal for optoelectronics applications. CsPbX3 (X = Cl, Br, I) PQDs exhibit exceptional optical properties, including high color purity and tunable bandgaps. Despite their promising characteristics, environmental sensitivity poses a challenge to their stability. This article reviews the solution-based synthesis methods with ligand engineering. It introduces the impact of factors like humidity, temperature, and light exposure on PQD's instability, as well as in situ and post-synthesis ligand engineering strategies. The use of various ligands, including X- and L-type ligands, is reviewed for their effectiveness in enhancing stability and luminescence performance. Finally, the significant potential of ligand engineering for the broader application of PQDs in optoelectronic devices is also discussed.

Recent advances in two-dimensional perovskite materials for light-emitting diodes

Light-emitting diodes (LEDs) are an indispensable part of our daily life. After being studied for a few decades, this field still has some room for improvement. In this regard, perovskite materials may take the leading role. In recent years, LEDs have become a most explored topic, owing to their various applications in photodetectors, solar cells, lasers, and so on. Noticeably, they exhibit significant characteristics in developing LEDs. The luminous efficiency of LEDs can be significantly enhanced by the combination of a poor illumination LED with low-dimensional perovskite. In 2014, the first perovskite-based LED was illuminated at room temperature. Furthermore, two-dimensional (2D) perovskites have enriched this field because of their optical and electronic properties and comparatively high stability in ambient conditions. Recent and relevant advancements in LEDs using low-dimensional perovskites including zero-dimensional to three-dimensional materials is reported. The major focus of this article is based on the 2D perovskites and their heterostructures (i.e., a combination of 2D perovskites with transition metal dichalcogenides, graphene, and hexagonal boron nitride). In comparison to 2D perovskites, heterostructures exhibit more potential for application in LEDs. State-of-the-art perovskite-based LEDs, current challenges, and prospects are also discussed.

Doping Up the Light: A Review of A/B-Site Doping in Metal Halide Perovskite Nanocrystals for Next-Generation LEDs

All-inorganic metal halide perovskite nanocrystals (PeNCs) show great potential for the next generation of perovskite light-emitting diodes (PeLEDs). However, trap-assisted recombination negatively impacts the optoelectronic properties of PeNCs and prevents their widespread adoption for commercial exploitation. To mitigate trap-assisted recombination and further enhance the external quantum efficiency of PeLEDs, A/B-site doping has been widely investigated to tune the bandgap of PeNCs. The bandgap of PeNCs is adjustable within a small range (no more than 0.1 eV) by A-site cation doping, resulting in changes in the bond length of Pb-X and the angle of [PbX6]4. Nevertheless, B-site doping of PeNCs has a more significant impact on the bandgap level through modification of surface defect states. In this perspective, we delve into the synthesis of PeNCs with A/B-site doping and their impacts on the structural and optoelectronic properties, as well as their impacts on the performance of subsequent PeLEDs. Furthermore, we explore the A-site and B-site doping mechanisms and the impact of device architecture on doped PeNCs to maximize the performance and stability of PeLEDs. This work presents a comprehensive overview of the studies on A-site and B-site doping in PeNCs and approaches to unlock their full potential in the next generation of LEDs.

Enhancing Optical and Thermal Stability of Blue-Emitting Perovskite Nanocrystals through Surface Passivation with Sulfonate or Sulfonic Acid Ligands

This study aims to enhance the optical and thermal properties of cesium-based perovskite nanocrystals (NCs) through surface passivation with organic sulfonate (or sulfonic acid) ligands. Four different phenylated ligands, including sodium β-styrenesulfonate (SbSS), sodium benzenesulfonate (SBS), sodium p-toluenesulfonate (SPTS), and 4-dodecylbenzenesulfonic acid (DBSA), were employed to modify blue-emitting CsPbBr1.5Cl1.5 perovskite NCs, resulting in improved size uniformity and surface functionalization. Transmission electron microscopy and X-ray photoelectron spectroscopy confirmed the successful anchoring of sulfonate or sulfonic acid ligands on the surface of perovskite NCs. Moreover, the photoluminescence quantum yield increased from 32% of the original perovskite NCs to 63% of the SPTS-modified ones due to effective surface passivation. Time-resolved photoluminescence decay measurements revealed extended PL lifetimes for ligand-modified NCs, indicative of reduced nonradiative recombination. Thermal stability studies demonstrated that the SPTS-modified NCs retained nearly 80% of the initial PL intensity when heated at 60 °C for 10 min, surpassing the performance of the original NCs. These findings emphasize the optical and thermal stability enhancement of cesium-based perovskite NCs through surface passivation with suitable sulfonate ligands.

Partial Ligand Stripping from CsPbBr3 Nanocrystals Improves Their Performance in Light-Emitting Diodes

Halide perovskite nanocrystals (NCs), specifically CsPbBr3, have attracted considerable interest due to their remarkable optical properties for optoelectronic devices. To achieve high-efficiency light-emitting diodes (LEDs) based on CsPbBr3 nanocrystals (NCs), it is crucial to optimize both their photoluminescence quantum yield (PLQY) and carrier transport properties when they are deposited to form films on substrates. While the exchange of native ligands with didodecyl dimethylammonium bromide (DDAB) ligand pairs has been successful in boosting their PLQY, dense DDAB coverage on the surface of NCs should impede carrier transport and limit device efficiency. Following our previous work, here, we use oleyl phosphonic acid (OLPA) as a selective stripping agent to remove a fraction of DDAB from the NC surface and demonstrate that such stripping enhances carrier transport while maintaining a high PLQY. Through systematic optimization of OLPA dosage, we significantly improve the performance of CsPbBr3 LEDs, achieving a maximum external quantum efficiency (EQE) of 15.1% at 516 nm and a maximum brightness of 5931 cd m-2. These findings underscore the potential of controlled ligand stripping to enhance the performance of CsPbBr3 NC-based optoelectronic devices.

Persistent enhancement of exciton diffusivity in CsPbBr3 nanocrystal solids

In semiconductors, exciton or charge carrier diffusivity is typically described as an inherent material property. Here, we show that the transport of excitons among CsPbBr3 perovskite nanocrystals (NCs) depends markedly on how recently those NCs were occupied by a previous exciton. Using transient photoluminescence microscopy, we observe a striking dependence of the apparent exciton diffusivity on excitation laser power that does not arise from nonlinear exciton-exciton interactions or thermal heating. We interpret our observations with a model in which excitons cause NCs to transition to a long-lived metastable configuration that markedly increases exciton transport. The exciton diffusivity observed here (>0.15 square centimeters per second) is considerably higher than that observed in other NC systems, revealing unusually strong excitonic coupling between NCs. The finding of a persistent enhancement in excitonic coupling may help explain other photophysical behaviors observed in CsPbBr3 NCs, such as superfluorescence, and inform the design of optoelectronic devices.

High-Performance Optoelectronic Gas Sensing Based on All-Inorganic Mixed-Halide Perovskite Nanocrystals with Halide Engineering

Gas sensors are of great interest to portable and miniaturized sensing technologies with applications ranging from air quality monitoring to explosive detection and medical diagnostics, but the existing chemiresistive NO2 sensors still suffer from issues such as poor sensitivity, high operating temperature, and slow recovery. Herein, a high-performance NO2 sensors based on all-inorganic perovskite nanocrystals (PNCs) is reported, achieving room temperature operation with ultra-fast response and recovery time. After tailoring the halide composition, superior sensitivity of ≈67 at 8 ppm NO2 is obtained in CsPbI2 Br PNC sensors with a detection level down to 2 ppb, which outperforms other nanomaterial-based NO2 sensors. Furthermore, the remarkable optoelectronic properties of such PNCs enable dual-mode operation, i.e., chemiresistive and chemioptical sensing, presenting a new and versatile platform for advancing high-performance, point-of-care NO2 detection technologies.

Synergistic Surface Modification for High-Efficiency Perovskite Nanocrystal Light-Emitting Diodes: Divalent Metal Ion Doping and Halide-Based Ligand Passivation

Surface defects of metal halide perovskite nanocrystals (PNCs) substantially compromise the optoelectronic performances of the materials and devices via undesired charge recombination. However, those defects, mainly the vacancies, are structurally entangled with each other in the PNC lattice, necessitating a delicately designed strategy for effective passivation. Here, a synergistic metal ion doping and surface ligand exchange strategy is proposed to passivate the surface defects of CsPbBr3 PNCs with various divalent metal (e.g., Cd2+ , Zn2+, and Hg2+ ) acetate salts and didodecyldimethylammonium (DDA+ ) via one-step post-treatment. The addition of metal acetate salts to PNCs is demonstrated to suppress the defect formation energy effectively via the ab initio calculations. The developed PNCs not only have near-unity photoluminescence quantum yield and excellent stability but also show luminance of 1175 cd m-2 , current efficiency of 65.48 cd A-1 , external quantum efficiency of 20.79%, wavelength of 514 nm in optimized PNC light-emitting diodes with Cd2+ passivator and DDA ligand. The "organic-inorganic" hybrid engineering approach is completely general and can be straightforwardly applied to any combination of quaternary ammonium ligands and source of metal, which will be useful in PNC-based optoelectronic devices such as solar cells, photodetectors, and transistors.

Shedding light on the environmental impact of the decomposition of perovskite solar cell

Perovskite materials, as the heart of perovskite solar cells (PSC), attracted great interest in the photovoltaic community since the efficiency of PSC dramatically increased to over 25% in a short period. However, the presence of Pb metal in the perovskite crystalline limits the progress of this new generation of solar cells from environmental aspects. Here, we have systematically investigated the impact of the decomposition of perovskite material on the special plant, named Coleus. The influence of the decomposition of a perovskite solar cell (p-PbI2) has a three-fold lower destruction than commercial PbI2 (s-PbI2) in the same condition. The p-PbI2 made destroying the roots and leafs slower and smoother than s-PbI2, which the amount of water absorption with the plant's root from p-PbI2 is two-fold lower than s-PbI2. The atomic absorption spectroscopy (AAS) indicated that the amount of Pb in the first week is about 3.2 and 2.1 ppm for s-PbI2, and p-PbI2, respectively, which in following for two next weeks reached to about relatively close together and finally in the last week decreased to 1.8 ppm for s-PbI2 and increased to 2.4 ppm for p-PbI2. This paper opens new avenues and challenges about the actual scenario on the impact of perovskite materials in PSCs on the plant and live metabolisms.

Metallic Germanium (111) Slab Structures

Prior research has indicated that the surface electron conductivity of Ge (111) wafers surpasses that of Ge (100) and Ge (110) wafers. This disparity has been ascribed to the variations in bond length, geometry, and frontier orbital electron energy distribution across different surface planes. The ab initio molecular dynamics (AIMD) simulation is used for the thermal stability of the Ge (111) slabs with different thicknesses and has provided new knowledge of its potential applications. To delve deeper into the properties of Ge (111) surfaces, we executed calculations for one- and two-layer Ge (111) surface slabs. The electrical conductivities of these slabs at room temperature were determined to be 966081.89 and 760157.03 Ω^-1 m^-1, respectively, with a unit cell conductivity of 1.96 Ω^-1 m^-1. These findings align with actual experimental data. Notably, the electrical conductivity of the single-layer Ge (111) surface exceeded that of intrinsic Ge by 100,000 times, heralding intriguing potential for including Ge surfaces in future device applications.

All-inorganic lead halide perovskite nanocrystals applied in advanced display devices

Advanced display devices are in greater demand due to their large color gamut, high color purity, ultrahigh visual resolution, and small size pixels. All-inorganic lead halide perovskite (AILHP) nanocrystals (NCs) possess inherent advantages such as narrow emission width, saturated color, and flexible integration, and have been developed as functional films, light sources, backlight components, and display panels. However, some drawbacks still restrict the practical application of advanced display devices based on AILHP NCs, including working stability, large-scale synthesis, and cost. In this review, we focus on AILHP NCs, review the recent progress in materials synthesis, stability improvement, patterning techniques, and device application. We also highlight the important role of materials systems in creating advanced display devices, followed by the challenges and opportunities in industrial processes. This review provides beneficial inspiration for the future development of AILHP NCs in colorful and white backlight, as well as high resolution full-color displays.

Effect of Acidic Strength of Surface Ligands on the Carrier Relaxation Dynamics of Hybrid Perovskite Nanocrystals

Perovskite nanocrystals (PeNCs) are known for their use in numerous optoelectronic applications. Surface ligands are critical for passivating surface defects to enhance the charge transport and photoluminescence quantum yields of the PeNCs. Herein, we investigated the dual functional abilities of bulky cyclic organic ammonium cations as surface-passivating agents and charge scavengers to overcome the lability and insulating nature of conventional long-chain type oleyl amine and oleic acid ligands. Here, red-emitting hybrid PeNCs of the composition Cs_xFA_(1-x)PbBr_yI_(3-y) are chosen as the standard (Std) sample, where cyclohexylammonium (CHA), phenylethylammonium (PEA) and (trifuluoromethyl)benzylamonium (TFB) cations were chosen as the bifunctional surface-passivating ligands. Photoluminescence decay dynamics showed that the chosen cyclic ligands could successfully eliminate the shallow defect-mediated decay process. Further, femtosecond transient absorption spectral (TAS) studies uncovered the rapidly decaying non-radiative pathways; i.e., charge extraction (trapping) by the surface ligands. The charge extraction rates of the bulky cyclic organic ammonium cations were shown to depend on their acid dissociation constant (pKa) values and actinic excitation energies. Excitation wavelength-dependent TAS studies indicate that the exciton trapping rate is slower than the carrier trapping rate of these surface ligands.

Enhanced and stabilized photoluminescence of perovskite cesium lead bromide nanocubes through ordered assemblies

This work clarified the effects of self-assembly of perovskite cesium lead bromide (CsPbBr₃) nanocubes (NCs) covered with didodecyldimethyl ammonium bromide (DDAB) on photoluminescence (PL) properties. Although the PL intensity of isolated NCs was weakened in the solid state even under inert conditions, the quantum yield of PL (PLQY) and the photostability of DDAB-covered NCs were drastically improved by the formation of two-dimensional (2D) ordered arrays on a substrate. The PLQY of the 2D arrays increased to ca. 60% by initial excitation illumination at 468 nm and was maintained for over 4000 h. The improved PL properties are attributable to the fixation of the surface ligand around the NCs in the specific ordered arrays.

Surface Reconstruction of CsPbBr3 Nanocrystals by the Ligand Engineering Approach for Achieving High Quantum Yield and Improved Stability

Oleylamine/oleic acid (OAm/OA) as the commonly used ligand is indispensable in the synthesis of perovskite nanocrystals (PNCs). Unfortunately, poor colloidal stability and unsatisfactory photoluminescence quantum yield (PLQY) are observed, resulting from a highly dynamic binding nature between ligands. Herein, we adopt a facile hybrid ligand (DDAB/ZnBr₂) passivation strategy to reconstruct the surface chemistry of CsPbBr₃ NCs. The hybrid ligand can detach the native surface ligand, in which the acid-base reactions between ligands are suppressed effectively. Also, they can substitute the loose capping ligand, anchor to the surface firmly, and supply sufficient halogens to passivate the surface trap, realizing an exceptional PLQY of 95% and an enhanced tolerance toward ambient storage, UV irradiation, anti-solvents, and thermal treatment. Besides, the as-fabricated white light-emitting diode (WLED) utilizing the PNCs as the green-emitting phosphor has a luminous efficiency around 73 lm/W; the color gamut covers 125% of the NTSC standard.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Exploring the Role of Short Chain Acids as Surface Ligands in Photoinduced Charge Transfer Dynamics from CsPbBr3 Perovskite Nanocrystals

The most commonly used surface capping ligands, like oleic acid and oleylamine, passivate the surface of perovskite nanocrystals (PNCs) to enhance their stability and optical properties. However, due to their inherent insulating nature, charge transport across the surface of the PNCs is hindered, limiting their application in devices. In this study, we have post-treatment CsPbBr₃ PNCs with short chain ligands benzoic acid (BA) and ascorbic acid (AA) and observed that both acid-treated PNCs show enhanced stability and optical properties. Still, BA-treated PNCs show the highest charge transport rate due to their conjugating nature. The photoelectrochemical measurements also show the most efficient electron flow across the surface of the PNC with BA-treated PNCs. A longer carrier lifetime and fast charge transfer make BA-treated PNCs ideal candidates for application in real-life devices.

Origin of the near 400 nm Absorption and Emission Band in the Synthesis of Cesium Lead Bromide Nanostructures: Metal Halide Molecular Clusters Rather Than Perovskite Magic-Sized Clusters

In the synthesis of cesium lead bromide (CsPbBr₃) perovskite quantum dots, with an electronic absorption and emission band around 510 nm, and perovskite magic-sized clusters (PMSCs), with an electronic absorption and emission band around 430 nm, another distinct absorption and emission around 400 nm is often observed. While many would attribute this band to small perovskite particles, here we show strong evidence that this band is a result of the formation of lead bromide molecular clusters (PbBr₂ MCs) passivated with ligands, which do not contain the A component of the ABX₃ perovskite structure. This evidence comes from a systematic comparative study of the reaction products with and without the A component under otherwise identical experimental conditions. The results support that the near 400 nm band originates from ligand-passivated PbBr₂ MCs. This observation seems to be quite general and is significant in understanding the nature of the reaction products in the synthesis of metal halide perovskite nanostructures.

Synthesis and Applications of Halide Perovskite Nanocrystals in Optoelectronics

The perovskites used for optoelectronic devices have been more attractive during recent years due to their wide variety of advantages, such as their low cost, high photoluminescence quantum yield (PLQY), high carrier mobility, flexible bandgap tunability, and high light absorption ability. However, optoelectronic applications for traditional inorganic and organic materials present dilemmas due to their hardly tunable bandgap and instability. On the other hand, there are some more important benefits for perovskite nanocrystals, such as a size-dependent bandgap and the availability of anion exchange at room temperature. Therefore, perovskite NC-based applications are currently favored, offering a research direction beyond perovskite, and much research has focused on the stability issue and device performance. Thus, the synthesis and applications of perovskite NCs need to be thoroughly discussed for the future development of solar cells, light-emitting diodes, photodetectors, and laser research.

Hot-Injection Synthesis Protocol for Green-Emitting Cesium Lead Bromide Perovskite Nanocrystals

All-inorganic cesium lead bromide (CsPbBr₃) nanocrystals are one of the prominent members of the metal halide perovskite family of semiconductor materials, which possess considerable stability and excellent optoelectronic properties leading to a multitude of their potential applications in solar cells, light-emitting devices, photodetectors, and lasers. Hot-injection strategy is a popular method used to synthesize CsPbBr₃ nanocrystals, which provides a convenient route to produce them in the shape of rather monodisperse nanocubes. As in any synthetic procedure, there are different factors like temperature, surface ligands, precursor concentration, as well as necessary postpreparation purification steps. Herein, we provide a comprehensive hot-injection synthesis protocol for CsPbBr₃ nanocrystals, outlining intrinsic and extrinsic factors that affect its reproducibility and elucidating in detail the precursor solution preparation, nanocrystal formation and growth, and postpreparative purification and storage conditions to allow for the fabrication of high-quality green-emitting material.

Blue Perovskite Nanocrystal Light-Emitting Diodes: Overcoming RuddlesdenPopper Fault-Induced Nonradiative Recombination via Post-Halide Exchange

Metal halide perovskites (MHPs) have gained traction as emitters owing to their excellent optical properties, such as facile bandgap tuning, defect tolerance, and high color purity. Nevertheless, blue-emitting MHP light-emitting diodes (LEDs) show only marginal progress in device efficiency compared with green and red LEDs. Herein, the origin of the drop in efficiency of blue-emitting perovskite nanocrystals (PNCs) by mixing halides and the genesis of Ruddlesden-Popper faults (RPFs) in CsPbBr_X Cl_3-X nanocrystals is investigated. Using scanning transmission electron microscopy and density functional theory calculations, the authors have found that RPFs induce possible nonradiative recombination pathways owing to the high chloride vacancy concentration nearby. The authors further confirm that the blue-emitting PNCs do not show RPFs post-halide exchange in the CsPbBr₃ nanocrystals. By introducing the post-halide exchange treatment, high-efficiency pure blue-emitting (464 nm) PNC-based LEDs with an external quantum efficiency of 2.1% and excellent spectral stability with a full-width at half-maximum of 14 nm are obtained.

In Situ Tetraalkylammonium Ligand Engineering of Organic-Inorganic Hybrid Perovskite Nanoparticles for Enhancing Long-Term Stability and Optical Tunability

Organic-inorganic hybrid perovskite nanoparticles (OIHP NPs) have attracted scientific attention owing to their efficient photoluminescence with optical tunability, which is highly advantageous for optoelectronic applications. However, the limited long-term stability of OIHP NPs has significantly hindered their practical application. Despite several synthetic strategies and encapsulation methods to stabilize OIHP NPs, complicated multi-step procedures are often required. In this study, we introduce an in situ ligand engineering method for stabilizing and controlling the optical properties of OIHP NPs using tetraalkylammonium (TAA) halides with various molecular structures at different concentrations. Our one-pot ligand engineering substantially enhanced the stability of the OIHP NPs without post-synthetic processes. Moreover, in certain cases, approximately 90% of the initial photoluminescence (PL) intensity was preserved even after a month under ambient conditions (room temperature, 20-50% relative humidity). To determine the role of ligand engineering in stabilizing the OIHP NPs, the surface binding properties of the TAA ligands were thoroughly analyzed using Raman spectroscopy. Specifically, the permanent positive charge of the TAA cations and consequent effective electrostatic interactions with the surfaces of the OIHP NPs are pivotal for preserving the initial PL intensity. Our investigation is beneficial for developing OIHP nanomaterials with improved stability and controlled photoluminescence for various optoelectronic applications, such as light-emitting devices, photosensitizers, photodetectors, photocatalysis, and solar cells.

Ultrahigh-resolution full-color perovskite nanocrystal patterning for ultrathin skin-attachable displays

High-definition red/green/blue (RGB) pixels and deformable form factors are essential for the next-generation advanced displays. Here, we present ultrahigh-resolution full-color perovskite nanocrystal (PeNC) patterning for ultrathin wearable displays. Double-layer transfer printing of the PeNC and organic charge transport layers is developed, which prevents internal cracking of the PeNC film during the transfer printing process. This results in RGB pixelated PeNC patterns of 2550 pixels per inch (PPI) and monochromic patterns of 33,000 line pairs per inch with 100% transfer yield. The perovskite light-emitting diodes (PeLEDs) with transfer-printed active layers exhibit outstanding electroluminescence characteristics with remarkable external quantum efficiencies (15.3, 14.8, and 2.5% for red, green, and blue, respectively), which are high compared to the printed PeLEDs reported to date. Furthermore, double-layer transfer printing enables the fabrication of ultrathin multicolor PeLEDs that can operate on curvilinear surfaces, including human skin, under various mechanical deformations. These results highlight that PeLEDs are promising for high-definition full-color wearable displays.

Improving the thermal resistance of fluorescent CsPb(Br,I)3 perovskite quantum dots by surface modification with perfluorodecanoic acid

CsPb(Br,I)₃ quantum dots (QDs) show application potential for optoelectronic devices. However, their thermal degradation is a significant problem. In this work, the effects of perfluorodecanoic acid (PFDA) modification on the photoluminescence (PL) and thermal resistance of CsPb(Br,I)₃ QDs were evaluated. The PL intensity of oleic-acid-modified quantum dots (OA-QDs) in toluene decreased drastically upon heating at 100°C. The PL quantum yield of the QDs increased from 69.6% to 77.4% upon modification with PFDA. Furthermore, the PL intensity of the QDs modified with PFDA (PFDA-QDs) increased to 140.6% upon heating, because of the reduction of surface defects upon adsorption of PFDA and its optimized adsorption state. A solid-film PFDA-QDs sample heated at 80°C for 4 h showed temporary PL enhancements for the OA-QDs and PFDA-QDs films to 445% and 557% of their initial values, respectively, upon heating for 0.25 h. This was attributed to the optimized adsorption states of the surface ligands. PFDA-QDs film maintained 354% after 4 h of heating, whereas that of OA-QDs film was 104%. Thus, PFDA modification enhances PL intensity and suppresses PL degradation under heating, which is important for wavelength converters for optoelectronic device applications.

Perovskite Quantum Dots for Emerging Displays: Recent Progress and Perspectives

The excellent luminescence properties of perovskite quantum dots (PQDs), including wide excitation wavelength range, adjustable emission wavelength, narrow full width at half maximum (FWHM), and high photoluminescence quantum yield (PLQY), highly match the application requirements in emerging displays. Starting from the fundamental structure and the related optical properties, this paper first introduces the existing synthesis approaches of PQDs that have been and will potentially be used for display devices, and then summarizes the stability improving approaches with high retention of PQDs' optical performance. Based on the above, the recent research progress of PQDs in displays is further elaborated. For photoluminescent display applications, the PQDs can be embedded in the backlighting device or color filter for liquid crystal displays (LCD), or they may function as the color conversion layer for blue organic light-emitting diodes (OLED) and blue micro-scale light-emitting diodes (μLED). In terms of next-generation electroluminescent displays, notable progress in perovskite quantum-dot light emitting diodes (PeQLED) has been achieved within the past decade, especially the maximum external quantum efficiency (EQE). To conclude, the key directions for future PQD development are summarized for promising prospects and widespread applications in display fields.

CsPb(Br/Cl)3 Perovskite Nanocrystals with Bright Blue Emission Synergistically Modified by Calcium Halide and Ammonium Ion

Colloidal cesium lead halide (CsPbX3, X = Cl, Br, and I) perovskite nanocrystals (NCs) demonstrate supreme optical properties in the spectra region of infrared, red, and green. High-performance blue-emitting counterparts are still eagerly required for next-generation full-color displays. However, it is challenging to obtain efficient blue perovskite NCs, especially in a deep blue region with an emission wavelength of around 460 nm or shorter. Herein, calcium halide and ammonium ions are applied simultaneously to modify the CsPb(Br/Cl)3 NCs in situ to reduce surface defects, finally remarkably enhancing the photoluminescence quantum yield (PLQY) from 13% to 93% with an emission peak at 455 nm and the Commission Internationale de l'Eclairage (CIE) coordinates at (0.147, 0.030), which is close to the requirement of the Rec.2020 standard and also meets the requirement of blue emission in DCI-P3. Bright white emission and a wide color gamut are also achieved by combining the commercial red-emitting and green-emitting phosphors. The combination of time-resolved PL spectra and femtosecond transient absorption results discloses the reason for PLQY improvement as suppressing the nonradiative recombination.

Synthesis of highly calibrated CsPbBr3 nanocrystal perovskites by soft chemistry

A new synthetic method for preparing highly calibrated CsPbBr₃ nanocrystal perovskites is described and analyzed using high-resolution scanning transmission electron microscopy. This new method based on soft chemistry leads to the large-scale production of nanocrystals. Such monodisperse nanocrystals allow for the deposition of homogeneous films, which provides new opportunities for the next generation of optoelectronic devices.

Colloidal Quantum Dot Solar Cells: Progressive Deposition Techniques and Future Prospects on Large-Area Fabrication

Colloidally grown nanosized semiconductors yield extremely high-quality optoelectronic materials. Many examples have pointed to near perfect photoluminescence quantum yields, allowing for technology-leading materials such as high purity color centers in display technology. Furthermore, because of high chemical yield, and improved understanding of the surfaces, these materials, particularly colloidal quantum dots (QDs) can also be ideal candidates for other optoelectronic applications. Given the urgent necessity toward carbon neutrality, electricity from solar photovoltaics will play a large role in the power generation sector. QDs are developed and shown dramatic improvements over the past 15 years as photoactive materials in photovoltaics with various innovative deposition properties which can lead to exceptionally low-cost and high-performance devices. Once the key issues related to charge transport in optically thick arrays are addressed, QD-based photovoltaic technology can become a better candidate for practical application. In this article, the authors show how the possibilities of different deposition techniques can bring QD-based solar cells to the industrial level and discuss the challenges for perovskite QD solar cells in particular, to achieve large-area fabrication for further advancing technology to solve pivotal energy and environmental issues.

Lead-Free Cs2 AgSbCl6 Double Perovskite Nanocrystals for Effective Visible-Light Photocatalytic C-C Coupling Reactions

Lead halide perovskite nanocrystals (NCs) have been regarded as a promising potential photocatalyst, owing to their high molar extinction coefficient, low economic cost, adjustable light absorption range, and ample surface active sites. However, the toxicity of lead and its inherent instability in water and polar solvents could hinder their wide application in the field of photocatalysis. Herein, with α-alkylation of aldehydes as a model reaction, C-C bond-forming is demonstrated in high yield by using lead-free double perovskite Cs₂ AgSbCl₆ NCs under visible light irradiation. Moreover, the photocatalytic performance is simply improved by rational control of the surface ligands and a reaction mechanism involving a radical intermediate is proposed. Although the stability requires further amelioration, the results indicate the enormous potential of lead-free double perovskite NC photocatalysts for organic synthesis and chemical transformations.

Surface Chemistry Engineering of Perovskite Quantum Dots: Strategies, Applications, and Perspectives

The presence of surface ligands not only plays a key role in keeping the colloidal integrity and non-defective surface of metal halide perovskite quantum dots (PQDs), but also serves as a knob to tune their optoelectronic properties for a variety of exciting applications including solar cells and light-emitting diodes. However, these indispensable surface ligands may also deteriorate the stability and key properties of PQDs due to their highly dynamic binding and insulating nature. To address these issues, a number of innovative surface chemistry engineering approaches have been developed in the past few years. Based on an in-depth fundamental understanding of the surface atomistic structure and surface defect formation mechanism in the tiny nanoparticles, a critical overview focusing on the surface chemistry engineering of PQDs including advanced colloidal synthesis, in-situ surface passivation, and solution-phase/solid-state ligand exchange is presented, after which their unprecedented achievements in photovoltaics and other optoelectronics are presented. The practical hurdles and future directions are critically discussed to inspire more rational design of PQD surface chemistry toward practical applications.

Polysalt ligands achieve higher quantum yield and improved colloidal stability for CsPbBr3 quantum dots

Colloidal lead halide perovskite quantum dots (PQDs) are relatively new semiconductor nanocrystals with great potential for use in optoelectronic applications. They also present a set of new scientifically challenging fundamental problems to investigate and understand. One of them is to address the rather poor colloidal and structural stability of these materials under solution phase processing and/or transfer between solvents. In this contribution, we detail the synthesis of a new family of multi-coordinating, bromide-based polysalt ligands and test their ability to stabilize CsPbBr₃ nanocrystals in polar solutions. The ligands present multiple salt groups involving quaternary cations, namely ammonium and imidazolium as anchors for coordination onto PQD surfaces, along with several alkyl chains with varying chain length to promote solubilization in various conditions. The ligands provide a few key benefits including the ability to repair damaged surface sites, allow rapid ligand exchange and phase transfer, and preserve the crystalline structure and morphology of the nanocrystals. The polysalt-coated PQDs exhibit near unity PLQY and significantly enhanced colloidal stability in ethanol and methanol.

Defect Passivation in Lead-Halide Perovskite Nanocrystals and Thin Films: Toward Efficient LEDs and Solar Cells

Lead-halide perovskites (LHPs), in the form of both colloidal nanocrystals (NCs) and thin films, have emerged over the past decade as leading candidates for next-generation, efficient light-emitting diodes (LEDs) and solar cells. Owing to their high photoluminescence quantum yields (PLQYs), LHPs efficiently convert injected charge carriers into light and vice versa. However, despite the defect-tolerance of LHPs, defects at the surface of colloidal NCs and grain boundaries in thin films play a critical role in charge-carrier transport and nonradiative recombination, which lowers the PLQYs, device efficiency, and stability. Therefore, understanding the defects that play a key role in limiting performance, and developing effective passivation routes are critical for achieving advances in performance. This Review presents the current understanding of defects in halide perovskites and their influence on the optical and charge-carrier transport properties. Passivation strategies toward improving the efficiencies of perovskite-based LEDs and solar cells are also discussed.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Synthesis of Red Cesium Lead Bromoiodide Nanocrystals Chelating Phenylated Phosphine Ligands with Enhanced Stability

Two new phosphine ligands, diphenylmethylphosphine (DPMP) and triphenylphosphine (TPP), were introduced onto cesium lead bromoiodide nanocrystals (CsPbBrI₂ NCs) to improve air stability in the ambient atmosphere. Incorporating DPMP or TPP ligands can also enhance film-forming and optoelectronic properties of the CsPbBrI₂ NCs. The results reveal that DPMP is a better ligand to stabilize the emission of CsPbBrI₂ NCs than TPP after storage for 21 days. The increased carrier lifetime and photoluminescence quantum yield (PLQY) of perovskite NCs are due to the surface passivation by DPMP or TPP ligands, which reduces nonradiative recombination at the trap sites. The DPMP and TPP-treated CsPbBrI₂ NCs were successfully utilized as red emitters for fabricating perovskite light-emitting diodes with enhanced performance and prolonged device lifetime relative to the pristine one.

A donor-acceptor ligand boosting the performance of FA0.8Cs0.2PbBr3 nanocrystal light-emitting diodes

A donor-acceptor ligand, 3-amino-2-bromo-6-methoxypyridine (ABMeoPy), was introduced to passivate FA0.8Cs0.2PbBr3 nanocrystals (NCs) by a post-processing method. The donor-acceptor interaction can greatly enhance the coordination bond of pyridine-Pb2+, and improve FA0.8Cs0.2PbBr3 NC performance with 95.99% photoluminescence quantum yield (PLQY), 6-month stability in solution, and 26% trap density decrease. In the light of ABMeoPy passivation of FA0.8Cs0.2PbBr3 NCs, the maximum luminance, the maximum current efficiency, and EQE of light-emitting diodes (LEDs) increased 69%, 110%, and 111%, respectively. The strategy of using D-A molecules to passivate perovskite NCs is quite simple and effective, which can be widely promoted in perovskite-based LEDs or solar cells.

Advances in Perovskite Light-Emitting Diodes Possessing Improved Lifetime

Recently, perovskite light-emitting diodes (PeLEDs) are seeing an increasing academic and industrial interest with a potential for a broad range of technologies including display, lighting, and signaling. The maximum external quantum efficiency of PeLEDs can overtake 20% nowadays, however, the lifetime of PeLEDs is still far from the demand of practical applications. In this review, state-of-the-art concepts to improve the lifetime of PeLEDs are comprehensively summarized from the perspective of the design of perovskite emitting materials, the innovation of device engineering, the manipulation of optical effects, and the introduction of advanced encapsulations. First, the fundamental concepts determining the lifetime of PeLEDs are presented. Then, the strategies to improve the lifetime of both organic-inorganic hybrid and all-inorganic PeLEDs are highlighted. Particularly, the approaches to manage optical effects and encapsulations for the improved lifetime, which are negligibly studied in PeLEDs, are discussed based on the related concepts of organic LEDs and Cd-based quantum-dot LEDs, which is beneficial to insightfully understand the lifetime of PeLEDs. At last, the challenges and opportunities to further enhance the lifetime of PeLEDs are introduced.

Investigation of the Role of the Environment on the Photoluminescence and the Exciton Relaxation of CsPbBr3 Nanocrystals Thin Films

In this work, we present a detailed optical investigation of the effects of the environment on the photoluminescence (PL) spectra and the relaxation dynamics of pristine and aged CsPbBr3 nanocrystal (NC) thin films. We demonstrate that, contrary to previous results on similar NCs, the PL intensity of pristine NCs is higher when the sample is in wet air than in vacuum, due to the passivation of defects reducing the free exciton trapping and the bound excitons non-radiative relaxation. The aged NCs show a PL intensity increase in wet air nine times stronger than the pristine ones, due to an interplay between static and dynamic effects, increasing the number of emitting NCs and reducing the non-radiative recombination rate of free excitons. These results improve the understanding of the possible interactions between perovskite NCs and the environment, which could be relevant for the development of optical gas sensors exploiting perovskite NCs.

Effective Stabilization of Perovskite Cesium Lead Bromide Nanocrystals through Facile Surface Modification by Perfluorocarbon Acid

CsPbX₃ (X = Cl, Br, I) perovskite nanocrystals (NCs) have attracted much attention as promising materials for next-generation optoelectronic applications. However, improvement of their low stabilities against heating and humidity is needed for practical use. In this work, we focused on perfluorodecanoic acid (PFDA) as a surface ligand and investigated the thermal and chemical stabilities of the photoluminescence (PL) properties of CsPbBr₃ NCs. Oleic acid (OA) adsorbed on the NCs was exchanged for decanoic acid (DA) and PFDA. OA-modified and DA-modified NCs exhibited drastic fluorescence quenching to 12.9 and 21.1% of their initial PL intensities, respectively, after heating at 100 °C for 4 h. In contrast, the PFDA-modified NCs maintained 92.1% of their PL intensity after the same heating. Furthermore, the polar solvent resistance was also improved by PFDA modification. These improvements can be attributed to the strong adsorptivity and high chemical stability of the PFDA ligand.

Improved Efficiency of Perovskite Solar Cells Using a Nitrogen-Doped Graphene-Oxide-Treated Tin Oxide Layer

Tin oxide (SnO₂) is widely adopted as an electron transport layer in perovskite solar cells (PeSCs) because it has high electron mobility, excellent charge selective behavior owing to a large band gap of 3.76 eV, and low-temperature processibility. To achieve highly efficient SnO₂-based PeSCs, it is necessary to control the oxygen vacancies in the SnO₂ layer, since the electrical and optical properties vary depending on the oxidation state of Sn. This study demonstrates that the performance of PeSCs may be improved by using nitrogen-doped graphene oxide (NGO) as an oxidizing agent for SnO₂. Since NGO changes the oxidation state of the Sn in SnO₂ from Sn²⁺ to Sn⁴⁺, the oxygen vacancies in SnO₂ can be reduced using NGO. Multiple devices are fabricated, and various techniques are used to assess their performance, including X-ray photoelectron spectroscopy, dark current analysis, and the dependence of the open-circuit voltage on light intensity. Compared with the average power conversion efficiency (PCE) of control devices, PeSCs with SnO₂:NGO composite layers exhibit greater PCEs with less deviation. Therefore, the introduction of NGO in a SnO₂ layer can be regarded as an effective method of controlling the oxidation state of SnO₂ to improve the performance of PeSCs.

Surface Modification for Improving the Photocatalytic Polymerization of 3,4-Ethylenedioxythiophene over Inorganic Lead Halide Perovskite Quantum Dots

Inorganic lead halide perovskite quantum dots (iLHP-QDs) have recently been used in the photocatalytic reaction. However, the factors that influence the photocatalytic performance of the iLHP-QDs have not been fully investigated. Herein, we synthesized a series of iLHP-QDs with varied halide ratios (CsPbX₃, X = I, I_0.67Br_0.33, I_0.5Br_0.5, I_0.33Br_0.67, Br) and studied their influence on the photocatalytic performance by monitoring the polymerization of 2,2',5',2″-ter-3,4-ethylenedioxythiophene (TerEDOT). The CsPbI₃ QDs showed the best performance owing to their narrow band gap and low exciton binding energy. Moreover, the photocatalytic performance of the iLHP-QDs could be simply improved by being treated with methyl acetate, which can be attributed to the replacement of the oleic acid by the short acetate acid and the introduction of the traps on the surface of QDs in the post-treatment. These results could help design a more efficient photocatalytic system and further promote the application of iLHP-QDs.

Understanding the Ligand Effects on Photophysical, Optical, and Electroluminescent Characteristics of Hybrid Lead Halide Perovskite Nanocrystal Solids

There has been a tremendous amount of interest in developing high-efficiency light-emitting diodes (LEDs) based on colloidal nanocrystals (NCs) of hybrid lead halide perovskites. Here, we systematically investigate the ligand effects on EL characteristics by tuning the hydrophobicity of primary alkylamine ligands used in NC synthesis. By increasing the ligand hydrophobicity, we find (i) a reduced NC size that induces a higher degree of quantum confinement, (ii) a shortened exciton lifetime that increases the photoluminescence quantum yield, (iii) a lowering of refractive index that increases the light outcoupling efficiency, and (iv) an increased thin-film resistivity. Accordingly, ligand engineering allows us to demonstrate high-performance green LEDs exhibiting a maximum external quantum efficiency up to 16.2%. The device operational lifetime, defined by the time lasted when the device luminance reduces to 85% of its initial value, LT85, reaches 243 min at an initial luminance of 516 cd m^-2.