Sustainable Graphene Aerogel as an Ecofriendly Cell Growth Promoter and Highly Efficient Adsorbent for Histamine from Red Wine

Graphene-Based Aerogels for Biomedical Application

Aerogels are three-dimensional solid networks with incredibly low densities, high porosity, and large specific surface areas. These aerogels have both nanoscale and macroscopic interior structures. Combined with graphene, the aerogels show improved mechanical strength, electrical conductivity, surface area, and adsorption capacity, making them ideal for various biomedical applications. The graphene aerogel has a high drug-loading capacity due to its large surface area, and the porous structure enables controlled drug release over time. The presence of graphene makes it a suitable material for wound dressings, blood coagulation, and bilirubin adsorption. Additionally, graphene's conductivity can help in the electrical stimulation of cells for improved tissue regeneration, and it is also appropriate for biosensors. In this review, we discuss the preparation and advantages of graphene-based aerogels in wound dressings, drug delivery systems, bone regeneration, and biosensors.

3D Porous MoS2-Decorated Reduced Graphene Oxide Aerogel as a Heterogeneous Catalyst for Reductive Transformation Reactions

The MoS2-based reduced graphene oxide aerogel (MoS2-rGOA)-assisted organic transformation reactions are presented. MoS2-rGOA is used as a heterogeneous catalyst for the reduction of benzene derivatives such as benzaldehyde, nitrobenzene, and benzonitrile to benzyl alcohol, aniline, and benzamide and their derivatives, respectively, in green solvents (water/methanol) and green reducing agents (hydrazine hydrate having N2 and H2 as byproducts). The mechanistic features of the reduction pathway, substrate scope, and the best suitable conditions by varying the temperature, solvent, reducing agent, catalyst loading, time, etc. are optimized. All of the synthesized products are obtained in quantitative yield with purity and well characterized based on nuclear magnetic resonance analysis. Further, it is also observed that our catalyst is efficiently recyclable and works well checked up to 5 cycles.

Air-enclosed pores in graphene aerogel inhibit the adsorption of bisphenol A but accelerate the adsorption of naphthalene

Graphene hydrogel (GH) and aerogel (GA) have great application potential as highly effective adsorbents, but the accessibility of their adsorption sites have not yet been identified, restricting our understanding on the adsorption mechanisms and manufacturing. This study comparatively studied the adsorption characteristics of bisphenol A (BPA) and naphthalene (NAP) on GH and GA, focussing on the accessibility of the adsorption sites. The adsorption of BPA on GA was much lower but faster than that on GH. NAP adsorption on GA was very close to that on GH but faster than that on the latter. Considering that NAP is volatilisable, we speculate that some unwetted sites in the air-enclosed pores are available to it, but not to BPA. We applied ultrasonic and vacuum treatments to remove the air in GA pores, which was verified using a CO₂ replacement experiment. BPA adsorption was greatly enhanced but slowed, while that of NAP was not enhanced. This phenomenon suggested that some inner pores became accessible in the aqueous phase after air removal from pores. The enhanced accessibility of air-enclosed pores was verified by the increased relaxation rate of surface-bounded water on GA, based on a ¹H NMR relaxation analysis. This study highlights that the accessibility of adsorption site plays a crucial role for the adsorption properties of carbon-based aerogel. The volatile chemicals may be quickly adsorbed in the air-enclosed pores, which be useful for immobilizing volatile contaminants.

Emerging Trends in Nanotechnology: Aerogel-Based Materials for Biomedical Applications

At present, aerogel is one of the most interesting materials globally. The network of aerogel consists of pores with nanometer widths, which leads to a variety of functional properties and broad applications. Aerogel is categorized as inorganic, organic, carbon, and biopolymers, and can be modified by the addition of advanced materials and nanofillers. Herein, this review critically discusses the basic preparation of aerogel from the sol-gel reaction with derivation and modification of a standard method to produce various aerogels for diverse functionalities. In addition, the biocompatibility of various types of aerogels were elaborated. Then, biomedical applications of aerogel were focused on this review as a drug delivery carrier, wound healing agent, antioxidant, anti-toxicity, bone regenerative, cartilage tissue activities and in dental fields. The clinical status of aerogel in the biomedical sector is shown to be similarly far from adequate. Moreover, due to their remarkable properties, aerogels are found to be preferably used as tissue scaffolds and drug delivery systems. The advanced studies in areas including self-healing, additive manufacturing (AM) technology, toxicity, and fluorescent-based aerogel are crucially important and are further addressed.

Fruit-Based Fermented Beverages: Contamination Sources and Emerging Technologies Applied to Assure Their Safety

The food and beverage market has become broader due to globalization and consumer claims. Under the umbrella of consumer demands, legislation, nutritional status, and sustainability, the importance of food and beverage safety must be decisive. A significant sector of food production is related to ensuring fruit and vegetable conservation and utilization through fermentation. In this respect, in this review, we critically analyzed the scientific literature regarding the presence of chemical, microbiological and physical hazards in fruit-based fermented beverages. Furthermore, the potential formation of toxic compounds during processing is also discussed. In managing the risks, biological, physical, and chemical techniques can reduce or eliminate any contaminant from fruit-based fermented beverages. Some of these techniques belong to the technological flow of obtaining the beverages (i.e., mycotoxins bound by microorganisms used in fermentation) or are explicitly applied for a specific risk reduction (i.e., mycotoxin oxidation by ozone). Providing manufacturers with information on potential hazards that could jeopardize the safety of fermented fruit-based drinks and strategies to lower or eliminate these hazards is of paramount importance.

Sustainable carbon nano-onions as an adsorbent for the efficient removal of oxo-anions

The increasing threats of oxo-anions in drinking water have posed a serious threat to human health, aquatic environment, ecology, and sustainability. Accordingly, developments of cost-effective and sustainable nanomaterials for water remediation are on top priority and highly sought in global research community. Carbon nano-onions (CNOs) are one of the emerging nanomaterials for water purification because of its unique morphology, surface reactivity, high density of surface-active sites, and microporous structure. Herein, flaxseed oil-derived CNOs are utilized as efficient adsorbent for the removal of toxic oxo-anions. Aside from the green and economic nature, CNOs provide high adsorption efficiency ~ 806.45 mg g^-1 for the removal of [Formula: see text] (99.9%) from aqueous system at ambient temperature, neutral pH in 70 min. The adsorption of [Formula: see text] onto CNOs was well fitted in pseudo-second order kinetics and followed the Langmuir adsorption isotherm model. The adsorption process was determined to be exothermic and spontaneous from the resulting thermodynamic characteristics. Furthermore, the high hydrophobic nature of CNOs make it recycling simpler. The real-life applicability of CNOs towards [Formula: see text] removal was tested in tap water, river water, and dam water. With all these observed results, CNOs show promise for practical water remediation applications.

High lignin containing hydrogels with excellent conducting, self-healing, antibacterial, dye adsorbing, sensing, moist-induced power generating and supercapacitance properties

Herein, we design a dynamic redox system of using high contents of lignosulfonate (LS) and Al³⁺ to prepare poly acrylic acid (PAA) (LS-g-PAA-Al) hydrogels. The presence of high LS and Al³⁺ contents, in combination with the effective Al³⁺ complexes formed, renders the resultant hydrogel with some unique attributes, including excellent ionic conductivity (as high as 7.38 S·m^-1) and antibacterial activity; furthermore, a very fast gelation (in 1 min) was obtained. As a flexible strain sensor, the LS-g-PAA-Al hydrogel with high conductivity demonstrates superior sensitivity in human movement detection. In addition, the rich anionic hydrophilic groups, such as sulfonic groups, phenolic hydroxyl groups, in the hydrogels impart the resultant hydrogels with excellent adsorption capacity for cationic dyes: when using Rhodamine B (RB) as a model cationic dye, the adsorption capacity of the resultant hydrogel reaches 334.64 mg·g^-1; as a moist-induced power generator, it generates maximum 150.5 mV open circuit voltage with moist air flow. When the hydrogel electrolyte is assembled into a supercapacitor assembly, it shows high specific capacitance of 245.4 F·g^-1, with the maximum energy density of 21.8 Wh·kg^-1, power density of 2.37 kW·kg^-1, and capacitance retention of 95.1% after 5000 consecutive charge-discharge cycles.

Sunlight-promoted photodegradation of Congo red by cadmium-sulfide decorated graphene aerogel

Herein, a simpler-viable methodology for the surface decoration of pear fruit derived graphene aerogel (GA) via cadmium sulfide (CdS) has been presented. GA can be easily synthesized from bio-mass, which provide an economic advantage. Surface decoration via CdS imparts photocatalytic activities in functionalized graphene aerogels (f-GA). CdS-f-GA is being explored here as a photocatalyst for the degradation of a toxic azo dye named Congo red in the presence of sunlight. The rate and mechanism associated with photodegradation were analyzed by performing kinetics and radical trap-based quenching experiments. Nuclear magnetic resonance and fourier transform infrared spectroscopy analyses of the control and photodegraded products were performed to ensure the degradation of the organic framework of Congo red. Additionally, the real-life applicability of CdS-f-GA was also analyzed by degrading the dye in different types of industrial samples (via the method of external spiking), which can advance its practical relevance.

Removal of organic contaminants from wastewater with GO/MOFs composites

Graphene oxide/metal-organic frameworks (GO/MOFs) have been prepared via solvothermal synthesis with ferrous sulfate heptahydrate, zirconium acetate and terephthalic acid for the purpose of removing organic pollutants from wastewater. The composites were analyzed using scanning electron microscopy, infrared spectrometry, and XRD. Tetracycline hydrochloride and orange II were implemented as model pollutants to evaluate the efficacy of the GO/MOFs in water purification, in which 50 mg of Zr/Fe-MOFs/GO was mixed with 100 mL of 10 mg/L, 20 mg/L, 30 mg/L, or 50 mg/L tetracycline hydrochloride solution and 25 mg/L, 35 mg/L, 45 mg/L, or 60 mg/L orange II solution, respectively. The removal efficacy after 4 hours was determined to be 96.1%, 75.8%, 55.4%, and 30.1%, and 98.8%, 91.9%, 71.1%, and 66.2%, respectively. The kinetics of pollutant removal was investigated for both tetracycline hydrochloride and orange II and excellent correlation coefficients of greater than 0.99 were obtained. The high efficacy of these MOFs in pollutant removal, coupled with their inexpensive preparation indicates the feasibility of their implementation in strategies for treating waste liquid. As such, it is anticipated that Zr/Fe-MOFs/GO composites will be widely applied in wastewater purification.

Multi-functional 2D hybrid aerogels for gas absorption applications

Aerogels have attracted significant attention recently due to their ultra-light weight porous structure, mechanical robustness, high electrical conductivity, facile scalability and their use as gas and oil absorbers. Herein, we examine the multi-functional properties of hybrid aerogels consisting of reduced graphene oxide (rGO) integrated with hexagonal boron nitride (hBN) platelets. Using a freeze-drying approach, hybrid aerogels are fabricated by simple mixing with various volume fractions of hBN and rGO up to 0.5/0.5 ratio. The fabrication method is simple, cost effective, scalable and can be extended to other 2D materials combinations. The hybrid rGO/hBN aerogels (HAs) are mechanically robust and highly compressible with mechanical properties similar to those of the pure rGO aerogel. We show that the presence of hBN in the HAs enhances the gas absorption capacities of formaldehyde and water vapour up to ~ 7 and > 8 times, respectively, as compared to pure rGO aerogel. Moreover, the samples show good recoverability, making them highly efficient materials for gas absorption applications and for the protection of artefacts such as paintings in storage facilities. Finally, even in the presence of large quantity of insulating hBN, the HAs are electrically conductive, extending the potential application spectrum of the proposed hybrids to the field of electro-thermal actuators. The work proposed here paves the way for the design and production of novel 2D materials combinations with tailored multi-functionalities suited for a large variety of modern applications.

Remediation of chromium- and fluoride-contaminated groundwater by immobilized Citrobacter sp. on a nano-ZrO2 hybrid material

To effectively address excessive SO₄^2-, Cr(VI), total chromium and F^- in the groundwater of acidic mining areas, a facultative anaerobic bacterium, Citrobacter, with sulfate-reducing properties, tolerance to hexavalent chromium and the ability to reduce Cr(VI) to Cr(III) was isolated and domesticated. Based on microbial immobilization technology, a nano-ZrO₂ polyacrylamide hybrid material was prepared as an embedding agent to form nano-ZrO₂ polyacrylamide Citrobacter (ZPC) particles. ZPC was microscopically characterized, and the removal performance and mechanism of ZPC for SO₄^2-, Cr(VI), total chromium and F^- in groundwater were analyzed. The results of single-factor tests showed that the optimal reaction conditions included a reaction temperature of 35°C, Citrobacter dosage of 35% (volume ratio) in the particles and hybrid material dosage of 300 mL; under these conditions, the removal rates of SO₄^2-, Cr(VI), total chromium and F^- were 70.5%, 100%, 100% and 93.3%, respectively, and the pH value increased from 4.6 to 8.07. On this basis, the effects of the reaction layer type, influent hydraulic load and influent concentration on the removal efficiency of polluted groundwater were studied through dynamic experiments. The experimental results showed that ZPC particles were better than Citrobacter as a reaction layer; the optimal influent hydraulic load was 3.0 m³/(m²·d); the selectivity of ZPC particles to anions and anionic groups was different; and the order of adsorption selectivity was F^- > Cr(VI) > SO₄^2-.

Scale-up one-pot synthesis of waste collagen and apple pomace pectin incorporated pentapolymer biocomposites: Roles of waste collagen for elevations of properties and unary/ ternary removals of Ti(IV), As(V), and V(V)

Herein, hazardous solid particulate waste collagenic fibers (SWCFs) of leather industries were incorporated into apple pomace pectin (APPN)-grafted-pentapolymer, i.e., APPN-g-[sodium 2-methylidenebutanedioate(SMBD)-co-N-((3-(isopropylamino)-3-oxopropoxy) methyl) butyramide (CM1)-co-N-(hydroxymethyl)prop-2-enamide (NHMPE)-co-N-(hydroxymethyl)-4-(N-isopropylbutyramido)butanamide (CM2)-co-N-(propan-2-yl)prop-2-enamide NPYPE)/ PENP1], i.e., APPN-g-PENP1/ PENP2, prepared via one-pot facile polymerization of APPN and synthetic monomers, i.e., SMBD, NHMPE, and NPYPE, in aqueous medium, to fabricate an optimum multifunctional hybrid biocomposite adsorbent/ HCOM3. In PENP1, PENP2, and HCOM3, fourth/ CM1 and fifth/ CM2 multifunctional comonomers were anchored in situ. The structures of PENP1, PENP2, HCOM3, CM1, CM2, and metal-ion adsorbed HCOM3; APPN-grafting; SWCF incorporation; and surface properties were analyzed through NMR, XPS, FTIR, XRD, and SEM. The elevated adsorption efficiencies (AEs), reusability, thermostability, swelling, network durability, and crosslink density of HCOM3 were attributed to variable functionalities of SWCF/ APPN, explored by DLS and TGA, swelling, network, and thermodynamic parameters. Compared to SWCF, APPN, PENP1, and PENP2, the elevated AEs and reusability compelled HCOM3 as more suitable for scalable waste management. The maximum AEs, i.e., 171.79, 180.47, and 177.27 mg g^-1, for Ti(IV), As(V), and V(V) at pH_op = 7.0, 3.0, and 5.0, respectively, within 5-100 mg L^-1 and at 298 K for 25 mg HCOM3 deteriorated during ternary adsorption by the antagonistic effects.

Bio-Active Free Direct Optical Sensing of Aflatoxin B1 and Ochratoxin A Using a Manganese Oxide Nano-System

Aflatoxins-B1 (AFB1) and Ochratoxin-A (OchA) are the two types of major mycotoxin produced by Aspergillus flavus, Aspergillus parasiticus fungi, Aspergillus carbonarius, Aspergillus niger, and Penicillium verrocusumv. These toxins are mainly found in metabolite cereals, corn, coffee beans, and other oil-containing food items. Excessive consumption of these toxins can be carcinogenic and lead to cancer. Thus, their rapid testing became essential for food quality control. Herein, manganese oxide nanoparticles (MnO2 nps) have been proposed to explore the interaction with AFB1 and OchA using UV-visible spectroscopy. MnO2 nps were synthesized using the co-precipitation method. They were pure and crystalline with an average crystallite size of 5–6 nm. In the UV-vis study, the maximum absorbance for MnO2 nps was observed around 260 nm. The maximum absorbance for AFB1 and OchA was observed at 365 and 380 nm, respectively, and its intensity enhanced with the addition of MnO2 nps. Sequential changes were observed with varying the concentration of AFB1 and OchA with a fixed concentration of MnO2 nps, resulting in proper interaction. The binding constant (kb) and Gibbs free energy for MnO2 nps-AFB1 and OchA were observed as 1.62 × 104 L g−1 and 2.67 × 104 L g−1, and −24.002 and −25.256 kJ/mol, respectively. The limit of detection for AFB1 and OchA was measured as 4.08 and 10.84 ng/ml, respectively. This bio‐active free direct sensing approach of AFB1 and OchA sensing can be promoted as a potential analytical tool to estimate food quality rapidly and affordable manner at the point of use.

Bio-mass derived functionalized graphene aerogel: a sustainable approach for the removal of multiple organic dyes and their mixtures

Herein, fabrication of a functionalized graphene aerogel (f-GA) from a biomass (pear fruit)-derived graphene aerogel (GA) is described. f-GA is showing better adsorption capacity towards CV, MB and RhB dyes than GA and activated charcoal.

Ultrasound-assisted magnetic nanoparticle-based gene delivery

Targeted gene delivery is important in biomedical research and applications. In this paper, we synergistically combine non-viral chemical materials, magnetic nanoparticles (MNPs), and a physical technique, low-intensity pulsed ultrasound (LIPUS), to achieve efficient and targeted gene delivery. The MNPs are iron oxide super-paramagnetic nanoparticles, coated with polyethyleneimine (PEI), which makes a high positive surface charge and is favorable for the binding of genetic materials. Due to the paramagnetic properties of the MNPs, the application of an external magnetic field increases transfection efficiency while LIPUS stimulation enhances cell viability and permeability. We found that stimulation at the intensity of 30 mW/cm² for 10 minutes yields optimal results with a minimal adverse effect on the cells. By combining the effect of the external magnetic field and LIPUS, the genetic material (GFP or Cherry Red plasmid) can enter the cells. The flow cytometry results showed that by using just a magnetic field to direct the genetic material, the transfection efficiency on HEK 293 cells that were treated by our MNPs was 56.1%. Coupled with LIPUS stimulation, it increased to 61.5% or 19% higher than the positive control (Lipofectamine 2000). Besides, compared with the positive control, our method showed less toxicity. Cell viability after transfection was 63.61%, which is 19% higher than the standard transfection technique. In conclusion, we designed a new gene-delivery method that is affordable, targeted, shows low-toxicity, yet high transfection efficiency, compared to other conventional approaches.

Nano Porous Carbon Derived from Citrus Pomace for the Separation and Purification of PMFs in Citrus Processing Wastes

The by-product of citrus juice processing is a huge source of bioactive compounds, especially polymethoxyflavones (PMFs) and fibers. In this study, a method for the separation and purification of PMFs from citrus pomace was established based on citrus nanoporous carbon (CNPC) enrichment. Different biomass porous carbons were synthesized, their adsorption/desorption characteristics were evaluated, and the CNPCs from the peel of Citrus tangerina Tanaka were found to be best for the enrichment of PMFs from the crude extracts of citrus pomace. Using this method, six PMF compounds including low-abundant PMFs in citrus fruits such as 5,6,7,4'-tetramethoxyflavone and 5-hydroxy-6,7,8,3',4'-pentamethoxyflavone can be simultaneously obtained, and the purities of these compounds were all higher than 95%, with the highest purity of nobiletin reaching 99.96%. Therefore, CNPCs have a great potential for the separation and purification of PMFs in citrus processing wastes, potentially improving the added value of citrus wastes. We also provide a method reference for disposing of citrus pomace in the future.

Green synthesis of peptide functionalized reduced graphene oxide (rGO) nano bioconjugate with enhanced antibacterial activity

Bioengineered nanoconjugates have enormous potential as a multifunctional platform for biomedical applications. Conjugation between biotic and abiotic materials enables formulation of nanoconjugates with enhanced physico-chemical properties, increased stability and ability to overcome the inherent shortcomings of individual materials. In this study, we report the preparation and biophysical characterization of an antibacterial system formulated by functionalizing reduced graphene oxide (rGO) with an antimicrobial peptide via covalent as well as non-covalent interaction mechanisms. Environmentally benign synthesis approach was adopted for the formation of rGO, using L-ascorbic acid as a reducing agent. Covalently conjugated peptide-graphitic conjugate displayed improved antibacterial efficacy against Escherichia coli with considerably low cytotoxic activity towards erythrocytes in comparison to self-assembled conjugate and rGO alone. The studies described herein are highly significant in the field of biomaterials and aims to open new avenues of research focusing on a plethora of applications as a prospective non-toxic substitute to conventional antibacterial approaches.

Upcycling of groundwater treatment sludge to magnetic Fe/Mn-bearing nanorod for chromate adsorption from wastewater treatment

Groundwater treatment sludge is a Fe/Mn-bearing waste that is mass produced in groundwater treatment plant. In this study, sludge was converted to a magnetic adsorbent (MA) by adding ascorbate. The sludge was weakly magnetised in the amorphous form with Fe and Mn contents of 28.8% and 8.1%, respectively. After hydrothermal treatment, Fe/Mn oxides in the sludge was recrystallised to siderite and rhodochrosite, with jacobsite as the intermediate in the presence of ascorbate. With an increment in ascorbate dosage, the obtained magnetic adsorbent had a significant increase in chromate adsorption but a decrease in magnetisation. When the M_ascorbate/M_Fe molar ratio was 10, the produced MA-10 was a dumbbell-shaped nanorod with a length of 2–5 μm and a diameter of 0.5–1 μm. This MA-10 showed 183.2 mg/g of chromate adsorption capacity and 2.81 emu/g of magnetisation. The mechanism of chromate adsorption was surface coprecipitation of the generated Cr³⁺ and Fe³⁺/Mn⁴⁺ from redox reaction between chromate and siderite/rhodochrosite on MA-10, separately. This study demonstrated an efficient recycling route of waste sludge from groundwater treatment to produce MA for treating chromate-bearing wastewater.

Synthesis of Conductive Carbon Aerogels Decorated with β-Tricalcium Phosphate Nanocrystallites

There has been substantial interest in research aimed at conductive carbon-based supports since the discovery that the electrical stimulus can have dramatic effect on cell behavior. Among these carbon-aerogels decorated with biocompatible polymers were suggested as future materials for tissue engineering. However, high reaction temperatures required for the synthesis of the aerogels tend to impair the stability of the polymeric networks. Herein, we report a synthetic route towards carbon-aerogel scaffolds decorated with biocompatible ceramic nanoparticles of tricalcium phosphate. The composites can be prepared at temperature as high as 1100 °C without significant effect on the morphology of the composite which is comparable with the original aerogel framework. Although the conductivity of the composites tends to decrease with the increasing ceramic content the measured conductivity values are similar to those previously reported on polymer-functionalized carbon-aerogels. The cell culture study revealed that the developed constructs support cell proliferation and provide good cell attachment suggesting them as potentially good candidates for tissue-engineering applications.

Pb2+ biosorption from aqueous solutions by live and dead biosorbents of the hydrocarbon-degrading strain Rhodococcus sp. HX-2

In this study, the Pb²⁺ biosorption potential of live and dead biosorbents of the hydrocarbon-degrading strain Rhodococcus sp. HX-2 was analyzed. Optimal biosorption conditions were determined via single factor optimization, which were as follows: temperature, 25°C; pH, 5.0, and biosorbent dose, 0.75 g L⁻¹. A response surface software (Design Expert 10.0) was used to analyze optimal biosorption conditions. The biosorption data for live and dead biosorbents were suitable for the Freundlich model at a Pb²⁺ concentration of 200 mg L⁻¹. At this same concentration, the maximum biosorption capacity was 88.74 mg g⁻¹ (0.428 mmol g⁻¹) for live biosorbents and 125.5 mg g⁻¹ (0.606 mmol g⁻¹) for dead biosorbents. Moreover, in comparison with the pseudo-first-order model, the pseudo-second-order model seemed better to depict the biosorption process. Dead biosorbents seemed to have lower binding strength than live biosorbents, showing a higher desorption capacity at pH 1.0. The order of influence of competitive metal ions on Pb²⁺ adsorption was Cu²⁺ > Cd²⁺ > Ni⁺. Fourier-transform infrared spectroscopy analyses revealed that several functional groups were involved in the biosorption process of dead biosorbents. Scanning electron microscopy showed that Pb²⁺ attached to the surface of dead biosorbents more readily than on the surface of live biosorbents, whereas transmission electron microscopy confirmed the transfer of biosorbed Pb²⁺ into the cells in the case of both live and dead biosorbents. It can thus be concluded that dead biosorbents are better than live biosorbents for Pb²⁺ biosorption, and they can accordingly be used for wastewater treatment.

Carbon nano-onions from waste oil for application in energy storage devices

Carbon nano onions produced by a sustainable and green synthetic method were utilized as high packing density electrode material for supercapacitor application.

A Sustainable Graphene Aerogel Capable of the Adsorptive Elimination of Biogenic Amines and Bacteria from Soy Sauce and Highly Efficient Cell Proliferation

A graphene aerogel (GA) with a three-dimensional (3D) structure, ultra-lightweight nature, and high hydrophobicity was simply fabricated by the one-step pyrolysis of glucose and ammonium chloride. The as-synthesized GA exhibited a 3D interconnected microporous architecture with a high surface area of ∼2860 m² g^-1 and pore volume of 2.24 cm³ g^-1. The hydrophobic GA (10 mg 100 mL^-1) demonstrated rapid and excellent adsorption performance for the removal of food toxins such as various biogenic amines (histamine, cadaverine, and spermine) and the hazardous bacterium Staphylococcus aureus (a food contaminant and a cause of poor wound healing) from a liquid matrix with a maximum simultaneous adsorption capacity for multiple biogenic amines of >85.19% (histamine), 74.1% (cadaverine), and 70.11% (spermidine) and a 100% reduction in the viable cell count of S. aureus within 80 min of interaction. The outstanding adsorption capacity can be attributed to a highly interconnected porous network in the 3D architecture and a high surface-to-volume ratio. A case study using soy sauce spiked with multiple biogenic amines showed successful removal of toxins with excellent recyclability without any loss in absorption performance. Biocompatibility of the GA in terms of cell viability was observed even at high concentrations (83.46% and 75.28% at 25 and 50 mg mL^-1, respectively). Confirmatory biocompatibility testing was conducted via live/dead cell evaluation, and the morphology of normal lung epithelial cells was examined via scanning electron microscopy showed no cellular shrinkage. Moreover, GA showed excellent removal of live colonies of S. aureus from the food matrix and immunoblotting analysis showed elevated protein expression levels of β-catenin and α-SMA (α-smooth muscle actin). The biocompatible sugar-based GA could simultaneously adsorb multiple biogenic amines and live bacteria and was easy to regenerate via simple separation due to its high floatability, hydrophobicity, surface area, and porosity without any structural and functional loss, making it especially relevant for food safety and biomedical applications.

Biomass-derived Carbon Quantum Dots for Visible-Light-Induced Photocatalysis and Label-Free Detection of Fe(III) and Ascorbic acid

Visible-light-driven photocatalysts prepared using renewable resources are crucial but challenging to develop for the efficient degradation of organic pollutants, which is required to solve ever-increasing water deterioration issues. In this study, we report a visible-light-responsive photocatalyst for the efficient degradation of methylene blue (MB) as a model pollutant dye. Green-emissive carbon quantum dots (CQDs) were synthesized from pear juice via a facile, scalable, one-pot solvothermal process. The as-synthesized CQDs exhibit superior photocatalytic activity under visible-light irradiation owing to their efficient light absorption, electron transfer, and separation of photogenerated charge carriers, facilitating ~99.5% degradation of MB within 130 min. A possible mechanism for the photocatalysis is proposed on the basis of comprehensive active species trapping experiments. Furthermore, the CQDs were used in a specific sensitive assay for Fe(III) and ascorbic acid (AA), even with interference from other metal ions. The fluorescence emission of CQDs was "turned off" specifically upon binding of Fe(III) and "turned on" with AA. The prepared CQDs represent efficient photocatalysts and fluorescent probes that are not restricted by toxicity, cost, or lack of scalability.

Removal of anthracycline cytostatics from aquatic environment: Comparison of nanocrystalline titanium dioxide and decontamination agents

Anthracyclines are a class of pharmaceuticals used in cancer treatment have the potential to negatively impact the environment. To study the possibilities of anthracyclines (represented by pirarubicin and valrubicin) removal, chemical inactivation using NaOH (0.01 M) and NaClO (5%) as decontamination agents and adsorption to powdered nanocrystalline titanium dioxide (TiO2) were compared. The titanium dioxide (TiO2) nanoparticles were prepared via homogeneous precipitation of an aqueous solution of titanium (IV) oxy-sulfate (TiOSO4) at different amount (5-120 g) with urea. The as-prepared TiO2 samples were characterized by XRD, HRSEM and nitrogen physisorption. The adsorption process of anthracycline cytostatics was determined followed by high-performance liquid chromatography coupled with mass spectrometry (LC-MS) and an in-situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) technique. It was found that NaClO decomposes anthracyclines to form various transformation products (TPs). No TPs were identified after the reaction of valrubicin with a NaOH solution as well as in the presence of TiO2 nanoparticles. The best degree of removal, 100% of pirarubicin and 85% of valrubicin, has been achieved in a sample with 120 grams of TiOSO4 (TIT120) and TiO2 with 60 grams (TIT60), respectively.

Modulating Linker Composition of Haptens Resulted in Improved Immunoassay for Histamine

Histamine (HA) is an important food contaminant generated during food fermentation or spoilage. However, an immunoassay for direct (derivatization free) determination of HA has rarely been reported due to its small size to induce the desired antibodies by its current hapten-protein conjugates. In this work, despite violating the classical hapten design criteria which recommend introducing a linear aliphatic (phenyl free) linker into the immunizing hapten, a novel haptens, HA-245 designed and synthesized with a phenyl-contained linker, exhibited significantly enhanced immunological properties. Thus, a quality-improved monoclonal antibody (Mab) against HA was elicited by its hapten-carrier conjugates. Then, as the linear aliphatic linker contained haptens, Hapten B was used as linker-heterologous coating haptens to eliminate the recognition of linker antibodies. Indirect competitive ELISA (ic-ELISA) was developed with a 50% inhibition concentration (IC₅₀) of 0.21 mg/L and a limit of detection (LOD) of 0.06 mg/L in buffer solution. The average recoveries of HA from spiked food samples for this ic-ELISA ranged from 84.1% and 108.5%, and the analysis results agreed well with those of referenced LC-MS/MS. This investigation not only realized derivatization-free immunoassay for HA, but also provided a valuable guidance for hapten design and development of immunoassay for small molecules.

Preparation of Micro-Nano Material Composed of Oyster Shell/Fe3O4 Nanoparticles/Humic Acid and Its Application in Selective Removal of Hg(II)

Micro-nano composite material was prepared to adsorb Hg(II) ions via the co-precipitation method. Oyster shell (OS), Fe3O4 nanoparticles, and humic acid (HA) were used as the raw materials. The adhesion of nanoparticles to OS displayed by scanning electron microscopy (SEM), the appearance of the (311) plane of standard Fe3O4 derived from X-ray diffraction (XRD), and the transformation of pore sizes to 50 nm and 20 μm by mercury intrusion porosimetry (MIP) jointly revealed the successful grafting of HA-functionalized Fe3O4 onto the oyster shell surface. The vibrating sample magnetometer (VSM) results showed superparamagnetic properties of the novel adsorbent. The adsorption mechanism was investigated based on X-ray photoelectron spectroscopy (XPS) techniques, which showed the process of physicochemical adsorption while mercury was adsorbed as Hg(II). The effects of pH (3-7), initial solution concentration (2.5-30 mg·L-1), and contact time (0-5 h) on the adsorption of Hg(II) ions were studied in detail. The experimental data were well fitted to the Langmuir isotherm equation (R2 = 0.991) and were shown to follow a pseudo-second-order reaction model (R2 = 0.998). The maximum adsorption capacity of Hg(II) was shown to be 141.57 mg·g-1. In addition, this new adsorbent exhibited excellent selectivity.

Nitrogen-doped fluorescent graphene nanosheets as visible-light-driven photocatalysts for dye degradation and selective sensing of ascorbic acid

Facile synthesis of water soluble fluorescent N-doped graphene nanosheets for multifunctional applications in photocatalysis and sensing.