Three-Dimensional Branched Crystal Carbon Nitride with Enhanced Intrinsic Peroxidase-Like Activity: A Hypersensitive Platform for Colorimetric Detection

CeO2 nanocages with tetra-enzyme mimetic activities for dual-channel ratiometric colorimetric detection of microcystins-LR

BACKGROUND

Microcystin-leucine-arginine (MC-LR) produced by various cyanobacteria during harmful algal bloom poses serious threats to drinking water safety and human health. Conventional chromatography-based detection methods require expensive instruments and complicated sample pretreatment, limiting their application for on-site detection. Colorimetric aptasensors are simple and rapid, and are amenable to fast detection. However, they provide only one output signal, resulting in poor sensitivity and accuracy. Dual-channel ratiometric colorimetric method based on the peroxidase-like activity of nanozyme can achieve self-calibration by recording two reverse signals, providing significantly enhanced sensitivity and accuracy.

RESULTS

CeO2 nanocages (CeO2 NCs) with tetra-enzyme mimetic activities (oxidase-, peroxidase-, catalase- and superoxide dismutase-like activities) were facilely synthesized using zeolitic imidazolate framework-67 (ZIF-67) as sacrificial template. The peroxidase-like activity of CeO2 NCs can be regulated by DNA, and it showed opposite response to two chromogenic substrates (2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) and 3,3',5,5'-tetramethylbenzidine (TMB)), which was mainly attributed to the changed affinity. On the basis of MC-LR aptamer-tunable peroxidase-like activity of CeO2 NCs in TMB and ABTS channel, a dual-channel ratiometric colorimetric aptasensor was constructed for detection of MC-LR. Compared with conventional single-signal colorimetric assays, the proposed method showed lower limit of detection (0.66 pg mL-1) and significantly enhanced sensitivity. Moreover, the practicability of the ratiometric colorimetric assay was demonstrated by detecting MC-LR in real water samples, and satisfactory recoveries (94.9-101.9 %) and low relative standard deviations (1.6-6.3 %) were obtained.

SIGNIFICANCE

This work presents a nanozyme-based ratiometric colorimetric aptasensor for MC-LR detection by recording the reverse responses of two chromogenic reactions. Benefiting from the self-calibration function, the method can achieve higher sensitivity and accuracy. The short detection time and practical application in real water samples show great potential for environmental monitoring.

Boron-Nitrogen-Edged Biomass-Derived Carbon: A Multifunctional Approach for Colorimetric Detection of H2O2, Flame Retardancy, and Triboelectric Nanogenerator

Enhancing the concentration and type of nitrogen (N) dopants within the Sp2-carbon domain of carbon recycled from biomass sources is an efficient approach to mimic CNT, GO, and rGO to activate oxidants such as H2O2, excluding toxic chemicals and limiting reaction steps. However, monitoring the kind and concentration of N species in the Sp2-C domain is unlikely with thermal treatments only. A high temperature for graphitization reduces N moieties, leading to low electron density. This inhibits H2O2 adsorption and activation on catalyst surfaces. In this study, coffee waste (CW) is converted into B, N-doped biochar (BXNbY) using boric acid-assisted pyrolysis (H3BO3 mass = X and carbonization temperature = Y) under N2 to overcome the challenge. The B dopant regulates the concentration and type of N, provides Lewis's acid sites, and converts graphitic-N to pyridine-N in BXNbY. The optimized B3Nb900 exhibits excellent colorimetric sensing performance toward H2O2 with a low detection limit (36.9 nM) and high selectivity in the presence of many interferences and milk samples due to high pyridinic-N and Sp2 domain sizes. Interestingly, B enhances other properties of N-containing CW-derived carbon and introduces self-extinguishing and tribopositive properties. Hence, BXNbY-coated polyurethane foam shows excellent flame retardancy and energy harvesting performance.

Exploring the Specificity of Nanozymes

Nanozymes, nanomaterials exhibiting enzyme-like activities, have emerged as a prominent interdisciplinary field over the past decade. To date, over 1200 different nanomaterials have been identified as nanozymes, covering four catalytic categories: oxidoreductases, hydrolases, isomerases, and lyases. Catalytic activity and specificity are two pivotal benchmarks for evaluating enzymatic performance. Despite substantial progress being made in quantifying and optimizing the catalytic activity of nanozymes, there is still a lack of in-depth research on the catalytic specificity of nanozymes, preventing the formation of consensual knowledge and impeding a more refined and systematic classification of nanozymes. Recently, debates have emerged regarding whether nanozymes could possess catalytic specificity similar to that of enzymes. This Perspective discusses the specificity of nanozymes by referring to the catalytic specificity of enzymes, highlights the specificity gap between nanozymes and enzymes, and concludes by offering our perspective on future research on the specificity of nanozymes.

Coacervate-Based Plexcitonic Assembly toward Peroxidase-like Activity and Ultrasensitive Glucose Sensing

Inbuilt catalytic centers anchored inside the confined architecture of artificial nanoreactors have gained tremendous attention owing to their vast applicability in various catalytic transformations. However, designing homogeneously distributed catalytic units with exposed surfaces in confined environment is a challenging task. Here, we have utilized quantum dot (QD)-embedded coacervate droplets (QD-Ds) as a confined compartment for the in situ synthesis of gold nanoparticles (Au NPs) without any additional reducing agent. High-resolution transmission electron microscopy images reveal homogeneous distribution of 5.6 ± 0.2 nm-sized Au NPs inside the QD-Ds (Au@QD-Ds). The in situ synthesized Au NPs are found to be stable over a period of 28 days without any agglomeration. Control experiments reveal that the free surface carboxylic acid groups of embedded QDs simultaneously act as reducing and stabilizing agents for Au NPs. Notably, these Au@QD-Ds exhibit superior peroxidase-like activity compared to bulk aqueous Au NPs and Au@QDs under similar experimental conditions. The observed peroxidase-like activity follows the classical Michaelis-Menten model inside the Au@QD-Ds via the fast electron-transfer pathway. The enhanced peroxidase-like activity has been explained by considering confinement, mass action, and the ligand-free surface of embedded Au NPs. The present plexcitonic nanocomposites exhibit excellent recyclability over several consecutive cycles without any compromise in their catalytic activity. Finally, a cascade reaction with glucose oxidase (GOx)-loaded Au@QD-Ds have been utilized for colorimetric detection of glucose with a limit of detection of 272 nM in solution as well as on filter paper. The present work highlights a facile and robust methodology for the fabrication of optically active functional hybrid plexcitonic assemblies and may find importance in various fields including bioanalytical chemistry and optoelectronics.

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.

Label-free fluorescence detection of hydrogen peroxide and glucose based on the Ni-MOF nanozyme-induced self-ligand emission

A bifunctional Ni-MOF nanosheet was synthesized and developed for label-free fluorescent detection of H₂O₂ and glucose. The Ni-MOF exhibited intrinsic peroxidase-like activity and its catalytic activity was demonstrated to be originated from the hydroxyl radicals (•OH) produced in catalytic process. Since the generated •OH enabled terephthalic acid, the non-fluorescent organic ligand of Ni-MOF, to form a strongly fluorescent 2-hydroxy terephthalic acid, the Ni-MOF nanozyme was endowed with dual-function properties of mimicking peroxidase and emitting fluorescence. Based on this bifunctional Ni-MOF nanozyme, the proposed label-free fluorescence sensing strategy was applied to detecting H₂O₂ and glucose with wide linear ranges of 0.1-20 mM and 8-30 μM, and low detection limits of 4.0 × 10^-5 M and 4.0 × 10^-6 M, respectively. Furthermore, the bifunctional Ni-MOF-based label-free sensing platform was successfully used for the glucose detection in human serum samples, showing good reproducibility and high accuracy. This strategy provides a green and sensitive method for the determination of small biomolecules in practical applications by the combination of enzyme cascade reaction.

K+ Ion-Doped Mixed Carbon Nitride: A Daylight-Driven Photocatalyst and Luminophore for Enhanced Chemiluminescence

Photocatalytic production of reactive oxygen species from O₂ at the interface of the photocatalyst is significant to convert luminous energy like daylight into chemical energy and could be momentous for a reactive oxygen species-based chemiluminescence system. Herein, we synthesized a novel K⁺ ion-doped tri-s-triazine/triazine mixed carbon nitride (MCN), in which K⁺ ions were intercalated into the layers in a bridging manner. After a mild daylight treatment for 30 min, the MCN suspension could produce long-lifetime reactive oxygen species and further directly produce intense and stable chemiluminescence emission in the presence of luminol. In particular, the chemiluminescence intensity was 780 times that of H₂O₂-luminol, and MCN could be recycled several times in the chemiluminescence system. The mechanism results revealed a large number of reactive oxygen species that were generated from O₂ on the surface of MCN through a temperate photocatalytic process. In the theoretical calculation, the charge density of N interacting with K⁺ ions was significantly more negative than that at the corresponding position in graphitic carbon nitride, which was beneficial to the adsorption and activation of oxygen, and the narrower band gap suggested that the doping of K⁺ ions was conducive to the intramolecular charge transfer interaction. Then, the long-lifetime reactive oxygen species triggered the conversion of luminol into an excited-state intermediate, which further transferred energy to MCN, producing strong chemiluminescence emission. The K⁺ ion-doped MCN might conduct as an efficient photocatalyst for reactive oxygen species generation, recyclable catalysts, and luminophores in the photoinduced chemiluminescence system.

Template-Regulated Bimetallic Sulfide Nanozymes with High Specificity and Activity for Visual Colorimetric Detection of Cellular H2O2

For the past several decades, most of the research studies on nanozymes have been aimed at improving their catalytic activity and diversity; however, developing nanozymes with strong catalytic activity and great specificity remains a challenge. Herein, a simple and efficient template synthesis method was used to synthesize bimetallic sulfide nanoparticles, NiCo₂S₄ NPs, and prove that they have excellent peroxidase-like activity with good specificity. By regulating polyvinyl pyrrolidone (PVP) and hexadecyl trimethyl ammonium bromide as the templating agent, we have obtained the NiCo₂S₄ (PVP) NPs with a high Ni/Co ratio, thus exhibiting superior peroxidase activity. In addition, the NiCo₂S₄ NPs selectively catalyzed and oxidized colorless 3,3,5,5-tetramethylbenzidine (TMB). On being treated with H₂O₂, TMB turns blue while other substrates did not undergo the oxidation reaction under the same conditions, such as 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium (ABTS) and dopamine. The high specificity of NiCo₂S₄ NPs is due to the strong electrostatic driving coordination between negatively charged NiCo₂S₄ NPs and positively charged TMB. Due to the peroxidase activity of the developed NiCo₂S₄ NPs, a simple, low-cost, and reliable colorimetric method was established. Simultaneously, this method for in situ quantitative monitoring of H₂O₂ produced by MDA-MB-231 cells was also achieved. This study has provided a theoretical basis for the improvement of the activity and specificity of bimetallic sulfide nanozymes and may offer guidance for the further reasonable design of related materials.

Aptamer-based biosensors for the diagnosis of sepsis

Sepsis, the syndrome of infection complicated by acute organ dysfunction, is a serious and growing global problem, which not only leads to enormous economic losses but also becomes one of the leading causes of mortality in the intensive care unit. The detection of sepsis-related pathogens and biomarkers in the early stage plays a critical role in selecting appropriate antibiotics or other drugs, thereby preventing the emergence of dangerous phases and saving human lives. There are numerous demerits in conventional detection strategies, such as high cost, low efficiency, as well as lacking of sensitivity and selectivity. Recently, the aptamer-based biosensor is an emerging strategy for reasonable sepsis diagnosis because of its accessibility, rapidity, and stability. In this review, we first introduce the screening of suitable aptamer. Further, recent advances of aptamer-based biosensors in the detection of bacteria and biomarkers for the diagnosis of sepsis are summarized. Finally, the review proposes a brief forecast of challenges and future directions with highly promising aptamer-based biosensors.

A bifunctionalized NiCo2O4-Au composite: Intrinsic peroxidase and oxidase catalytic activities for killing bacteria and disinfecting wound

A NiCo₂O₄-Au composite was fabricated following the calcination-reduction method and testified to exhibit the intrinsic high peroxidase- and oxidase-like activities. The composite could activate a low level of H₂O₂ (100 μM) to kill E. coli and S. aureus. NiCo₂O₄-Au composite could be easily separated by an external magnet from the media and reused several times. NiCo₂O₄-Au composite could also effectively damage the existing biofilms and prevent the formation of new biofilms. The electron spin resonance tests showed that NiCo₂O₄-Au composite catalyzed H₂O₂ into reactive oxygen species (ROS), mainly including OH, O₂^-, and ¹O₂; while the oxidase-like activity of NiCo₂O₄-Au also stemmed from the ROS formation in the absence of H₂O₂. The radical trapping experiment confirmed that OH and ¹O₂ were the main radicals in the antibacterial process for NiCo₂O₄-Au in the presence of H₂O₂. A NiCo₂O₄-Au based Band-Aid was also designed, which exhibited high anti-infective and wound-healing properties. This study has demonstrated that NiCo₂O₄-Au composite can be a promising antibacterial agent in environmental and clinical applications.

Free radicals for cancer theranostics

Free radicals were generally regarded as highly reactive, transient and harmful species. In fact, some of the free radicals can also be inactive, long-lived and beneficial for our health. These properties of free radicals provide future possibilities for their application in various fields. Owning to their open-shell electronic structure, free radicals exhibit unique advantages in biomedical applications, such as high reactivity, photoacoustic and photothermal conversion ability, molecular magnetic. In this review, recent progress on free radicals and their applications in cancer theranostics are presented. Typical materials that exhibit controlled generation of free radicals and their applications for photodynamic therapy (PDT), chemodynamic therapy (CDT), sonodynamic therapy (SDT), gas therapy, hypoxic cancer treatment, photothermal therapy (PTT), photoacoustic imaging (PAI) and magnetic resonance imaging (MRI) are summarized and discussed.

N, S, and P-Co-doped Carbon Quantum Dots: Intrinsic Peroxidase Activity in a Wide pH Range and Its Antibacterial Applications

Nanozymes have drawn significant scientific interest due to their high practical importance in terms of overcoming the instability, complicated synthesis, and high cost of protein enzymes. However, their activity is generally limited to particular pHs, especially acidic ones. Herein, we report that luminescent N, S, and P-co-doped carbon quantum dots (NSP-CQDs) act as attractive peroxidase mimetics in a wide pH range, even at neutral pH, for the peroxidase substrate 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) in the presence of H₂O₂. The synergistic effects of multiple heteroatoms doping in CQDs boost the catalytic activity in a wide pH range attributed to the presence of high density of active sites for enzymatic-like catalysis and accelerated electron transfer during the peroxidase-like reactions. A possible reaction mechanism for the peroxidase-like activity of CQDs is investigated based on the radical trapping experiments. Moreover, the multifunctional activity of NSP-CQDs was further utilized for antibacterial assays for both Gram-negative and Gram-positive model species, including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively. The growths of the employed E. coli and S. aureus were found to be significantly inhibited due to the peroxidase-mediated perturbation of cell walls. The present work signifies the current advance in the rational design of N, S, and P-co-doped CQDs as highly active peroxidase mimics for novel applications in diverse fields, including catalysis, medical diagnostics, environmental chemistry, and biotechnology.

Colorimetric biosensing of nopaline synthase terminator using Fe3O4@Au and hemin-functionalized reduced graphene oxide

In this paper, we present a simple and label-free colorimetric biosensor for detection of the nopaline synthase (NOS) terminator in genetically modified (GM) plants. The "signal on" colorimetric biosensor was developed using a nanocomposite consisted of gold nanoparticles doped magnetic Fe₃O₄ nanoparticles (Fe₃O₄@Au NP), capture probe DNA (cDNA), and hemin-functionalized reduced graphene oxide nanosheets (H-GN). The nanocomposite was successfully prepared by means of Au-S bonds and the strong π interactions between cDNA and H-GN. The sensing approach is based on the excellent peroxidase-mimicking activity of H-GN and its different electrostatic interactions with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). In presence of the target NOS, the cDNA in the nanocomposite will hybridize with its complementary sequence, and form dsDNA structure. Due to the weak π interactions between dsDNA and H-GN, a portion of H-GN will be released from the surface of Fe₃O₄@Au NPs and transferred into solution. After magnetic separation was performed, the supernatant was incubated with 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. The released H-GN can catalyze the oxidation reaction of TMB and turn the colorless solution blue. This "signal-on" colorimetric biosensor shows a broad linear range of 0.5-100 nM for the target NOS, with a 0.19 nM detection limit. The application of the biosensor for determination of NOS segments in samples of GM and non-GM tomatoes shows that it can discriminate between GM and non-GM plants. The reliability of the method for samples of NOS-spiked GM tomato suggests satisfactory recoveries in the range of 93.6%-94.2%.

Plasma-Assisted Controllable Doping of Nitrogen into MoS2 Nanosheets as Efficient Nanozymes with Enhanced Peroxidase-Like Catalysis Activity

Heteroatom doping is one of the effective ways to improve the catalytic performances of nanozymes. In the present work, the plasma-assisted controllable doping of nitrogen (N) into MoS₂ nanosheets has been initially proposed, resulting in efficient nanozymes. The so-obtained nanozymes were characterized separately by TEM, XRD, XPS, and FTIR. It was discovered that the resulting N-doped MoS₂ nanosheets could present dramatically enhanced peroxidase-like catalytic activities depending on the plasma treatment time. Particularly, that with the 2-min treatment could display the highest catalytic activity, which is over 3-fold higher than that of pristine MoS₂, that was also demonstrated by the kinetics studies. Herein, the N₂ plasma treatment could facilitate the N elements to be doped covalently into MoS₂ nanosheets to achieve the increased surface wettability and affinity of nanozymes for the improved access of the electrons and substrates of catalytic reactions. More importantly, the covalent doping of N elements into MoS₂ nanosheets with a lower Fermi level, as evidenced by the DFT analysis, could facilitate the promoted electron transferring, resulting in the enhanced catalysis of N-doped MoS₂ nanozymes, in addition to the high catalytic stability in water. Such a controllable plasma treatment strategy may open a new door toward the large-scale applications for doping heteroatoms into various nanozymes with improved catalysis performances.

Dynamically Tunable Plasmonic Band for Reversible Colorimetric Sensors and Surface-Enhanced Raman Scattering Effect with Good Sensitivity and Stability

A colorimetric sensor based on plasmonic nanoparticles (NPs) is a promising and convenient detection tool, but its reproducibility and adjustability remain a challenge because the NPs are mainly random and uncontrollable. Herein, a colorimetric sensor with good reversibility and reproducibility was prepared by embedding the two-dimensional (2D) Au NP arrays on the surface of the polyacrylamide hydrogel film to form 2D Au NP arrays attached a hydrogel composite. For this composite, with the change of the interspacing distance of Au NPs driven by the swelling-shrinking behavior of the hydrogel carrier, the diffraction peaks faded away and plasmonic coupling peaks appeared, accompanied by a series of obvious color changes (iridescence ↔ violet ↔ golden yellow ↔ red), which can be correlated to the applied water content. Importantly, the composite had good reproducibility as a result of a highly ordered array structure. Additionally, this colorimetric sensor with a dynamically tunable plasmonic band can be used as a high-quality surface-enhanced Raman scattering (SERS) substrate because the gap distance of the Au NPs can be uniformly controlled. We demonstrated that, as the active gap distance decreased, the SERS signals can be significantly intensified. When the water content reached 40%, this SERS substrate exhibited high sensitivity (10^-10 M for 4-aminothiophenol and 10^-9 M for thiram) and good reproducibility (relative standard deviation of <20%) using the excitation laser of 785 nm because of the small gap between two adjacent Au NPs and the highly ordered periodic structure. Such 2D Au NP arrays attached to a hydrogel composite could be a new strategy to obtain a high-quality colorimetric sensor and dynamic SERS substrate.

The improvement of photocatalysis O2 production over BiVO4 with amorphous FeOOH shell modification

A novel amorphous FeOOH modified BiVO₄ photocatalyst (A-FeOOH/BiVO₄) was successfully produced and characterized by various techniques. The results showed that amorphous FeOOH with about 2 nm thickness evenly covered on BiVO₄ surface, which caused resultant A-FeOOH/BiVO₄ exhibiting higher visible light photocatalytic performance for producing O₂ from water than BiVO₄. When the covered amount of amorphous FeOOH was 8%, the resultant photocatalyst possessed the best photocatalytic performance. To find the reasons for the improvement of photocatalytic property, electrochemical experiments, DRS, PL and BET, were also measured, the experimental results indicated that interface effect between amorphous FeOOH and BiVO₄ could conduce to migration of photogenerated charge, and exhibit stronger light responded capacity. These positive factors promoted A-FeOOH/BiVO₄ presenting improved the photocatalytic performance. In a word, the combination of amorphous FeOOH with BiVO₄ is an effective strategy to conquer important challenges in photocatalysis field.