Co/Fe Oxyhydroxides Supported on Perovskite Oxides as Oxygen Evolution Reaction Catalyst Systems

Rb-Doped Perovskite Oxides: Surface Enrichment and Structural Reconstruction During the Oxygen Evolution Reaction

Alkali-metal doped perovskite oxides have emerged as promising materials due to their unique properties and broad applications in various fields, including photovoltaics and catalysis. Understanding the complex interplay between alkali metal doping, structural modifications, and their impact on performance remains a crucial challenge. In this study, this challenge is addressed by investigating the synthesis and properties of Rb-doped perovskite oxides. These results reveal that the doping of Rb into perovskite oxides function as a structural modifier in the as-synthesized samples and during the oxygen evolution reaction (OER) as well. Electron microscopy and first-principles calculations confirm the enrichment of Rb on the surface of the as-synthesized sample. Further investigations into the electrocatalytic reaction revealed that the Rb-doped perovskite underwent drastic restructuring with Rb leaching and formation of strontium oxide.

Elucidating the Mechanism of Fe Incorporation in In Situ Synthesized Co-Fe Oxygen-Evolving Nanocatalysts

Ni- and Co-based catalysts with added Fe demonstrate promising activity in the oxygen evolution reaction (OER) during alkaline water electrolysis, with the presence of Fe in a certain quantity being crucial for their enhanced performance. The mode of incorporation, local placement, and structure of Fe ions in the host catalyst, as well as their direct/indirect contribution to enhancing the OER activity, remain under active investigation. Herein, the mechanism of Fe incorporation into a Co-based host was investigated using an in situ synthesized Co-Fe catalyst in an alkaline electrolyte containing Co2+ and Fe3+. Fe was found to be uniformly incorporated, which occurs solely after the anodic deposition of the Co host structure and results in exceptional OER activity with an overpotential of 319 mV at 10 mA cm-2 and a Tafel slope of 28.3 mV dec-1. Studies on the lattice structure, chemical oxidation states, and mass changes indicated that Fe is incorporated into the Co host structure by replacing the Co3+ sites with Fe3+ from the electrolyte. Operando Raman measurements revealed that the presence of doped Fe in the Co host structure reduces the transition potential of the in situ Co-Fe catalyst to the OER-active phase CoO2. The findings of our facile synthesis of highly active and stable Co-Fe particle catalysts provide a comprehensive understanding of the role of Fe in Co-based electrocatalysts, covering aspects that include the incorporation mode, local structure, placement, and mechanistic role in enhancing the OER activity.

Metal-Oxides- and Metal-Oxyhydroxides-Based Nanocomposites for Water Splitting: An Overview

Water electrolysis is an important alternative technology for large-scale hydrogen production to facilitate the development of green energy technology. As such, many efforts have been devoted over the past three decades to producing novel electrocatalysis with strong electrochemical (EC) performance using inexpensive electrocatalysts. Transition metal oxyhydroxide (OxH)-based electrocatalysts have received substantial interest, and prominent results have been achieved for the hydrogen evolution reaction (HER) under alkaline conditions. Herein, the extensive research focusing on the discussion of OxH-based electrocatalysts is comprehensively highlighted. The general forms of the water-splitting mechanism are described to provide a profound understanding of the mechanism, and their scaling relation activities for OxH electrode materials are given. This paper summarizes the current developments on the EC performance of transition metal OxHs, rare metal OxHs, polymers, and MXene-supported OxH-based electrocatalysts. Additionally, an outline of the suggested HER, OER, and water-splitting processes on transition metal OxH-based electrocatalysts, their primary applications, existing problems, and their EC performance prospects are discussed. Furthermore, this review article discusses the production of energy sources from the proton and electron transfer processes. The highlighted electrocatalysts have received substantial interest to boost the synergetic electrochemical effects to improve the economy of the use of hydrogen, which is one of best ways to fulfill the global energy requirements and address environmental crises. This article also provides useful information regarding the development of OxH electrodes with a hierarchical nanostructure for the water-splitting reaction. Finally, the challenges with the reaction and perspectives for the future development of OxH are elaborated.

Enhanced OER Performance and Dynamic Transition of Surface Reconstruction in LaNiO3 Thin Films with Nanoparticles Decoration

In an electrocatalytic process, the cognition of the active phase in a catalyst has been regarded as one of the most vital issues, which not only boosts the fundamental understanding of the reaction procedure but also guides the engineering and design for further promising catalysts. Here, based on the oxygen evolution reaction (OER), the stepwise evolution of the dominant active phase is demonstrated in the LaNiO3 (LNO) catalyst once the single-crystal thin film is decorated by LNO nanoparticles. It is found that the OER performance can be dramatically improved by this decoration, and the catalytic current density at 1.65 V can be enhanced by ≈1000% via ≈109 cm-2 nanoparticle adhesion after extracting the contribution of surface enlargement. Most importantly, a transition of the active phase from LNO to NiOOH via surface reconstruction with the density of LNO nanoparticles is demonstrated. Several mechanisms in terms of this active phase transition are discussed involving lattice orientation-induced change of the surface energy profile, the lattice oxygen participation, and the A/B-site ions leaching during OER cycles. This study suggests that the active phases in transition metal-based OER catalysts can transform with morphology, which should be corresponding to distinct engineering strategies.

Etching-Induced Surface Reconstruction of NiMoO4 for Oxygen Evolution Reaction

Rational reconstruction of oxygen evolution reaction (OER) pre-catalysts and performance index of OER catalysts are crucial but still challenging for universal water electrolysis. Herein, we develop a double-cation etching strategy to tailor the electronic structure of NiMoO4, where the prepared NiMoO4 nanorods etched by H2O2 reconstruct their surface with abundant cation deficiencies and lattice distortion. Calculation results reveal that the double cation deficiencies can make the upshift of d-band center for Ni atoms and the active sites with better oxygen adsorption capacity. As a result, the optimized sample (NMO-30M) possesses an overpotential of 260 mV at 10 mA cm-2 and excellent long-term durability of 162 h. Importantly, in situ Raman test reveals the rapid formation of high-oxidation-state transition metal hydroxide species, which can further help to improve the catalytic activity of NiMoO4 in OER. This work highlights the influence of surface remodification and shed some light on activating catalysts.

Toward Superb Perovskite Oxide Electrocatalysts: Engineering of Coupled Nanocomposites

A significant issue that bedeviled the commercialization of renewable energy technologies, ranging from low-temperature water electrolyzers to high-temperature solid oxide cells, is the lack of high-performance catalysts. Among various candidates that could tackle such a challenge, perovskite oxides are rising-star materials because of their unique structural and compositional flexibility. However, single-phase perovskite oxides are challenging to satisfy all the requirements of electrocatalysts concurrently for practical applications, such as high catalytic activity, excellent stability, good ionic and electronic conductivities, and superior chemical/thermo-mechanical robustness. Impressively, perovskite oxides with coupled nanocomposites are emerging as a novel form offering multifunctionality due to their intrinsic features, including infinite interfaces with solid interaction, tunable compositions, flexible configurations, and maximum synergistic effects between assorted components. Considering this new configuration has attracted great attention owing to its promising performances in various energy-related applications, this review timely summarizes the leading-edge development of perovskite oxide-based coupled nanocomposites. Their state-of-art synthetic strategies are surveyed and highlighted, their unique structural advantages are highlighted and illustrated through the typical oxygen reduction reaction and oxygen evolution reactions in both high and low-temperature applications. Opinions on the current critical scientific issues and opportunities in this burgeoning research field are all provided.

Recent Advances in Perovskite Catalysts for Efficient Overall Water Splitting

Hydrogen is considered a promising clean energy vector with the features of high energy capacity and zero-carbon emission. Water splitting is an environment-friendly and effective route for producing high-purity hydrogen, which contains two important half-cell reactions, namely, the anodic oxygen evolution reaction (OER) and the cathodic hydrogen evolution reaction (HER). At the heart of water splitting is high-performance electrocatalysts that efficiently improve the rate and selectivity of key chemical reactions. Recently, perovskite oxides have emerged as promising candidates for efficient water splitting electrocatalysts owing to their low cost, high electrochemical stability, and compositional and structural flexibility allowing for the achievement of high intrinsic electrocatalytic activity. In this review, we summarize the present research progress in the design, development, and application of perovskite oxides for electrocatalytic water splitting. The emphasis is on the innovative synthesis strategies and a deeper understanding of structure–activity relationships through a combination of systematic characterization and theoretical research. Finally, the main challenges and prospects for the further development of more efficient electrocatalysts based on perovskite oxides are proposed. It is expected to give guidance for the development of novel non-noble metal catalysts in electrochemical water splitting.

Enhancement of Catalytic Activity and Stability of La0.6Ca0.4Fe0.7Ni0.3O2.9 Perovskite with ppm Concentration of Fe in the Electrolyte for the Oxygen Evolution Reaction

The catalytic activity and stability of an iron-nickel based oxygen-deficient perovskite for the oxygen evolution reaction (OER) are drastically improved with the ppm additive of Fe ions to the alkaline electrolyte. The enhancement is attributed to a 1–2 nm restructured Ni_0.5Fe_0.5O_x(OH)_2-x (oxy)hydroxide layer, as demonstrated with scanning transmission electron microscopy. La_0.6Ca_0.4Fe_0.7Ni_0.3O_2.9 shows almost a four-fold increase in OER activity after Fe addition relative to the as-prepared pristine electrolyte, which demonstrates the low Tafel slope of 44 ± 2.4 mV dec⁻¹ and the superior intrinsic activity of 706 ± 71 A g⁻¹_oxide at 1.61 V vs. RHE.

Soft synthesis and characterization of goethite-based nanocomposites as promising cyclooctene oxidation catalysts

Goethite based nanocomposites with a different composition such as 6FeO(OH)·MnO(OH)·0.5H₂O (Mn-composite), xFeO(OH)·M(OH)₂·yH₂O (Co-composite (M: Co, x = 12, y = 3), Ni-composite (M: Ni, x = 7, y = 2)) and xFeO(OH)·MO·yH₂O (Cu-composite (M: Cu, x = 5.5, y = 3), Zn-composite (M: Zn, x = 6, y = 1.5)) have been prepared by a soft chemical synthesis consisting in acetate hydrolysis. The data provided by Fourier transform infrared (FTIR), ultraviolet-visible-near infrared (UV-Vis-NIR), electron paramagnetic resonance (EPR) and Mössbauer spectra account for a slight modification of all composites' physicochemical properties compared to the starting material. Powder X-ray diffraction and transmission electron microscopy (TEM) investigations revealed the secondary phase nature and presence along with that of goethite. The TEM data are also consistent with a nano rod-like morphology with a 5–10 nm width and an average length of 40 nm. The catalytic oxidation of cyclooctene with O₂ using isobutyraldehyde as reductant and acetonitrile as a solvent was performed in batch conditions for 5 h at room temperature. The selectivity for the epoxide was higher than 99% for all tested solids. The conversion of cyclooctene decreased from 55% to 4% following the same order of variance as the base/acid sites ratio: Mn-composite > Fe-composite > Co-composite > Ni-composite > Zn-composite > Cu-composite. The 6FeO(OH)·MnO(OH)·0.5H₂O (Mn-composite) exhibited the most promising catalytic activity in cyclooctene oxidation, which can be correlated with the redox ability of Mn(iii) combined with the increased base character of this solid. The catalytic activity of this sample decreases by 10% after several successive reaction cycles.

Goethite based nanocomposites with different compositions (6FeO(OH)·MnO(OH)·0.5H₂O, xFeO(OH)·M(OH)₂·yH₂O or xFeO(OH)·MO·yH₂O where M = Co, Ni, Cu or Zn) have been prepared by a soft chemical synthesis via acetate hydrolysis.

Unusual Role of Point Defects in Perovskite Nickelate Electrocatalysts

Low-cost transition-metal oxide is regarded as a promising electrocatalyst family for an oxygen evolution reaction (OER). The classic design principle for an oxide electrocatalyst believes that point defect engineering, such as oxygen vacancies (V_O^..) or heteroatom doping, offers the opportunities to manipulate the electronic structure of material toward optimal OER activity. Oppositely, in this work, we discover a counterintuitive phenomenon that both V_O^.. and an aliovalent dopant (i.e., proton (H⁺)) in perovskite nickelate (i.e., NdNiO₃ (NNO)) have a considerably detrimental effect on intrinsic OER performance. Detailed characterizations unveil that the introduction of these point defects leads to a decrease in the oxidative state of Ni and weakens Ni-O orbital hybridization, which triggers the local electron-electron correlation and a more insulating state. Evidenced by first-principles calculation using the density functional theory (DFT) method, the OER on nickelate electrocatalysts follows the lattice oxygen mechanism (LOM). The incorporation of point defect increases the energy barrier of transformation from OO*(V_O) to OH*(V_O) intermediates, which is regarded as the rate-determining step (RDS). This work offers a new and significant perspective of the role that lattice defects play in the OER process.

Correlation between Oxygen Vacancies and Oxygen Evolution Reaction Activity for a Model Electrode: PrBaCo2 O5+δ

The role of the perovskite lattice oxygen in the oxygen evolution reaction (OER) is systematically studied in the PrBaCo₂ O_5+δ family. The reduced number of physical/chemical variables combined with in-depth characterizations such as neutron dif-fraction, O K-edge X-ray absorption spectroscopy (XAS), electron energy loss spectroscopy (EELS), magnetization and scanning transmission electron microscopy (STEM) studies, helps investigating the complex correlation between OER activity and a single perovskite property, such as the oxygen content. Larger amount of oxygen vacancies appears to facilitate the OER, possibly contributing to the mechanism involving the oxidation of lattice oxygen, i.e., the lattice oxygen evolution reaction (LOER). Furthermore, not only the number of vacancies but also their local arrangement in the perovskite lattice influences the OER activity, with a clear drop for the more stable, ordered stoichiometry.

Polyaniline@MOF fiber derived Fe–Co oxide-based high performance electrocatalyst

Electrochemical energy conversion and storage are important and coupled with a number of electrocatalytic processes.

Tuning the Co Oxidation State in Ba0.5Sr0.5Co0.8Fe0.2O3-δ by Flame Spray Synthesis Towards High Oxygen Evolution Reaction Activity

The perovskite-type oxide Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) is known as a highly active and stable oxygen evolution reaction (OER) electrocatalyst composited out of non-noble metals. The possibility of using the scalable flame spray synthesis (FSS) technique for the production of BSCF nanoparticles intensified the interest in this material for a future application in an alkaline water electrolyzer. A possible scale-up would require the optimization of the synthesis parameters to maximize the production rate. To further understand the influence of the synthesis parameters of the tunable FSS on the OER activity of BSCF, a systematic study was carried out by producing BSCF with different total metal concentrations (CTM), flow rates of the precursor solution (FRPS) and of the dispersion gas (FRDG). This study reveals that all three parameters have a direct impact on the OER activity of BSCF—measured in a rotating disc electrode (RDE) setup—due to the controllability of the initial Co and Fe oxidation state—indicated by X-ray absorption spectroscopy (XAS) measurements—and with that also of the oxygen vacancy concentration in the as-synthesized BSCF. This controllability enables the optimization of the OER activity of BSCF and emphasizes the importance of having Co in a lower initial oxidation state for reaching a high electrocatalytic performance.

Utilizing ion leaching effects for achieving high oxygen-evolving performance on hybrid nanocomposite with self-optimized behaviors

Ion leaching from pure-phase oxygen-evolving electrocatalysts generally exists, leading to the collapse and loss of catalyst crystalline matrix. Here, different from previous design methodologies of pure-phase perovskites, we introduce soluble BaCl₂ and SrCl₂ into perovskites through a self-assembly process aimed at simultaneously tuning dual cation/anion leaching effects and optimizing ion match in perovskites to protect the crystalline matrix. As a proof-of-concept, self-assembled hybrid Ba_0.35Sr_0.65Co_0.8Fe_0.2O_3-δ (BSCF) nanocomposite (with BaCl₂ and SrCl₂) exhibits the low overpotential of 260 mV at 10 mA cm^-2 in 0.1 M KOH. Multiple operando spectroscopic techniques reveal that the pre-leaching of soluble compounds lowers the difference of interfacial ion concentrations and thus endows the host phase in hybrid BSCF with abundant time and space to form stable edge/face-sharing surface structures. These self-optimized crystalline structures show stable lattice oxygen active sites and short reaction pathways between Co–Co/Fe metal active sites to trigger favorable adsorption of OH⁻ species.

Water oxidation catalysis may provide the electrons needed for sustainable fuel production, but catalysts often degrade under working conditions. Here, authors introduce soluble species into perovskites to exert positive ion leaching effects for enhancing perovskite stability and activity.

Performance enhancement of oxygen evolution reaction through incorporating bimetallic electrocatalysts in two-dimensional metal–organic frameworks

We designed and synthesized a series of bimetallic and monometallic 2D metal–organic framework electrocatalysts with excellent stability, discussing their different electrochemical catalysts for oxygen evolution reaction (OER).