Auxetic Thermoresponsive Nanoplasmonic Optical Switch

Tunable crystalline assemblies using surface-engineered protein cages

Assembly of nanoparticles into superlattices yields nanomaterials with novel properties. We have recently shown that engineered protein cages are excellent building blocks for the assembly of inorganic nanoparticles into highly structured hybrid materials, with unprecedented precision. In this study, we show that the protein matrix, composed of surface-charged protein cages, can be readily tuned to achieve a number of different crystalline assemblies. Simply by altering the assembly conditions, different types of crystalline structures were produced, without the need to further modify the cages. Future work can utilize these new protein scaffolds to create nanoparticle superlattices with various assembly geometries and thus tune the functionality of these hybrid materials.

3D-Printed Hydrogels as Photothermal Actuators

Thermoresponsive hydrogels were 3D-printed with embedded gold nanorods (GNRs), which enable shape change through photothermal heating. GNRs were functionalized with bovine serum albumin and mixed with a photosensitizer and poly(N-isopropylacrylamide) (PNIPAAm) macromer, forming an ink for 3D printing by direct ink writing. A macromer-based approach was chosen to provide good microstructural homogeneity and optical transparency of the unloaded hydrogel in its swollen state. The ink was printed into an acetylated gelatin hydrogel support matrix to prevent the spreading of the low-viscosity ink and provide mechanical stability during printing and concurrent photocrosslinking. Acetylated gelatin hydrogel was introduced because it allows for melting and removal of the support structure below the transition temperature of the crosslinked PNIPAAm structure. Convective and photothermal heating were compared, which both triggered the phase transition of PNIPAAm and induced reversible shrinkage of the hydrogel-GNR composite for a range of GNR loadings. During reswelling after photothermal heating, some structures formed an internally buckled state, where minor mechanical agitation recovered the unbuckled structure. The BSA-GNRs did not leach out of the structure during multiple cycles of shrinkage and reswelling. This work demonstrates the promise of 3D-printed, photoresponsive structures as hydrogel actuators.

Temperature-sensitive metal-enhanced fluorescence and plasmon resonance energy transfer

Experimental decoupling of the effects of plasmon resonance energy transfer (PRET) and metal-enhanced fluorescence (MEF) within the same nanometal-fluorophore pair is fascinating but challenging. In this study, we presented a possible solution for this by coating plasmonic Au nanoparticles (AuNPs) with temperature-sensitive poly(N-isopropylacrylamide) (pNIPAM) shells and R6G hybrids, termed the Au@p-R nanoplatform, which could reversibly adjust the separation between dyes and the AuNP surface, enabling an ON/OFF switch between MEF and PRET. In our optimization process, we discovered that 20 kDa of pNIPAM causes an MEF effect owing to an appropriate shrinking distance of 6.86 ± 0.85 nm. This dual-model nanoplatform exhibits great potential for tracking temperature-dependent transitions.

Plasmonic Array at the Liquid-Liquid Interface: A Dual-Mode Optical Sensing Platform for Multianalytes

Analyte-triggered nanoparticle (NP) assemblies in bulk colloidal suspension have been extensively utilized in various optical sensors. Nevertheless, the assembling process is still limited by the slow diffusion dynamics of NPs and the low concentration of analytes in trace detections, which hinders further improvement of the sensitivity and repeatability of the sensors. In this work, by functionalizing the gold NPs with specific ligands, we constructed a dual-mode optical sensing platform for multianalytes based on the plasmonic NP array at the liquid-liquid interface. Through emulsification, the NP diffusion kinetics are boosted for several orders, and the NPs are condensed from the bulk aqueous phase to the liquid-liquid interface as a plasmonic array. The as-formed metasurface generates major reflectance and surface-enhanced Raman scattering changes in response to analytes, providing two optical sensing modes. As prototypes, cysteine and glucose are selected as the target molecules, achieving the limit of detection as 193 ± 2 and 297 ± 12 pM, respectively.

Electrotunable Nanoplasmonics for Amplified Surface Enhanced Raman Spectroscopy

Tuning the properties of optical metamaterials in real time is one of the grand challenges of photonics. Being able to do so will enable a class of adaptive photonic materials for use in applications such as surface enhanced Raman spectroscopy and reflectors/absorbers. One strategy to achieving this goal is based on the electrovariable self-assembly and disassembly of two-dimensional nanoparticle arrays at a metal | liquid interface. As expected, the structure results in plasmonic coupling between NPs in the array but perhaps as importantly between the array and the metal surface. In such a system, the density of the nanoparticle array can be reversibly controlled by the variation of electrode potential. Theory suggests that due to a collective plasmon-coupling effect  less than 1 V variation of electrode potential can give rise to a dramatic simultaneous change in optical reflectivity from ∼93% to ∼1% and the amplification of the SERS signal by up to 5 orders of magnitude. This is experimentally demonstrated using a platform based on the voltage-controlled assembly of 40 nm Au-nanoparticle arrays at a TiN/Ag electrode in contact with an aqueous electrolyte. We show that all the physics underpinning the behavior of this platform works precisely as suggested by the proposed theory, setting the electrochemical nanoplasmonics as a promising direction in photonics research.

Optical response of electro-tuneable 3D superstructures of plasmonic nanoparticles self-assembling on transparent columnar electrodes

Electrically tuneable, guided self-assembly of plasmonic nanoparticles (NPs) at polarized, patterned solid-liquid interfaces could enable numerous platforms for designing nanoplasmonic optical devices with new tuneable functionalities. Here, we propose a unique design of voltage-controlled guided 3D self-assembly of plasmonic NPs on transparent electrodes, patterned as columnar structures-arrays of vertical nanorods. NP assembly on the electrified surfaces of those columnar structures allows formation of a 3D superstructure of NPs, comprising stacking up of NPs in the voids between the columns, forming multiple NP-layers. A comprehensive theoretical model, based on quasi-static effective medium theory and multilayer Fresnel reflection scheme, is developed and verified against full-wave simulations for obtaining optical responses-reflectance, transmittance, and absorbance-from such systems of 3D self-assembled NPs. With a specific example of small gold nanospheres self-assembling on polarized zinc oxide columns, we show that the reflectance spectrum can be controlled by the number of stacked NP-layers. Numerical simulations show that peak reflectance can be enhanced up to ∼1.7 times, along with spectral broadening by a factor of ∼2-allowing wide-range tuning of optical reflectivity. Smaller NPs with superior mobility would be preferable over large NPs for realizing such devices for novel photonic and sensing applications.