3D Printed Ion-Responsive Personalized Transdermal Patch

Microneedle patches are easy-to-use medical devices for transdermal administration. However, the insufficient insertion of microneedles due to the gap between planar patches and contoured skin affects drug delivery. Herein, we formulate a prepolymer for high-fidelity three-dimensional (3D) printed personalized transdermal patches. With the excellent photoinitiation ability of 2-(4-methoxystyryl)-4,6-bis(trichloromethyl)-1,3,5-triazine (Tz), a high-fidelity and precise microneedle patch is successfully fabricated. Upon irradiation of the white illuminator, the doped gold nanoparticles (AuNPs) in the patch release heat and promisingly induce sweat production. With the introduction of Na+, the dominant component of sweat, the curvature of the produced transdermal patch is observed due to the ion-induced network rearrangement. The alkanethiol-stabilized AuNP with an end group of a carboxyl group causes controlled drug release behavior. Furthermore, the irradiation-induced photothermal heating of AuNP can facilitate the sustainability of drug release thanks to the substantially increased particle size of AuNP. These findings demonstrate that the developed prepolymer is a promising candidate for the production of transdermal patches fitting the curvature of the body surface.

Plasmonic Optical Wells-Based Enhanced Rate PCR

Rapid, sensitive, inexpensive point-of-care molecular diagnostics are crucial for the efficient control of spreading viral diseases and biosecurity of global health. However, the gold standard, polymerase chain reaction (PCR) is time-consuming and expensive and needs specialized testing laboratories. Here, we report a low-cost yet fast, selective, and sensitive Plasmonic Optical Wells-Based Enhanced Rate PCR: POWER-PCR. We optimized the efficient optofluidic design of 3D plasmonic optical wells via the computational simulation of light-to-heat conversion and thermophoretic convection in a self-created plasmonic cavity. The POWER-PCR chamber with a self-passivation layer can concentrate incident light to accumulate molecules, generate rapid heat transfer and thermophoretic flow, and minimize the quenching effect on the naked Au surface. Notably, we achieved swift photothermal cycling of nucleic acid amplification in POWER-PCR on-a-chip in 4 min 24 s. The POWER-PCR will provide an excellent solution for affordable and sensitive molecular diagnostics for precision medicine and preventive global healthcare.

Optoplasmonic Effects in Highly Curved Surfaces for Catalysis, Photothermal Heating, and SERS

Surface curvature can be used to focus light and alter optical processes. Here, we show that curved surfaces (spheres, cylinders, and cones) with a radius of around 5 μm lead to maximal optoplasmonic properties including surface-enhanced Raman scattering (SERS), photocatalysis, and photothermal processes. Glass microspheres, microfibers, pulled fibers, and control flat substrates were functionalized with well-dispersed and dense arrays of 45 nm Au NP using polystyrene-block-poly-4-vinylpyridine (PS-b-P4VP) and chemically modified with 4-mercaptobenzoic acid (4-MBA, SERS reporter), 4-nitrobenzenethiol (4-NBT, reactive to plasmonic catalysis), or 4-fluorophenyl isocyanide (FPIC, photothermal reporter). The various curved substrates enhanced the plasmonic properties by focusing the light in a photonic nanojet and providing a directional antenna to increase the collection efficacy of SERS photons. The optoplasmonic effects led to an increase of up to 1 order of magnitude of the SERS response, up to 5 times the photocatalytic conversion of 4-NBT to 4,4'-dimercaptoazobenzene when the diameter of the curved surfaces was about 5 μm and a small increase in photothermal effects. Taken together, the results provide evidence that curvature enhances plasmonic properties and that its effect is maximal for spherical objects around a few micrometers in diameter, in agreement with a theoretical framework based on geometrical optics. These enhanced plasmonic effects and the stationary-phase-like plasmonic substrates pave the way to the next generation of sensors, plasmonic photocatalysts, and photothermal devices.

Nanoengineering Natural Leather for Dynamic Thermal Management and Electromagnetic Interference Shielding

Unpredictable and extreme weather conditions, along with increasing electromagnetic pollution, have resulted in a significant threat to human health and productivity, causing irreversible damage to society's well-being and economy. However, existing personal temperature management and electromagnetic protection materials lack adaptability to dynamic environmental changes. To address this, a unique asymmetric bilayer leather/a-MWCNTs/CA fabric is developed by vacuum-infiltrating interconnected a-MWCNTs networks into natural leather's microfiber backbone and spraying porous acetic acid (CA) on the reverse side. Such fabric achieves simultaneous passive radiation cooling, heating, and anti-electromagnetic interference functions without external energy input. The fabric's cooling layer has high solar reflectance (92.0%) and high infrared emissivity (90.2%), providing an average subambient radiation cooling effect of 10 °C, while the heating layer has high solar absorption (98.0%), enabling excellent passive radiative heating and effective compensation for warming via Joule heating. Additionally, the fabric's 3D conductive a-MWCNTs network provides electromagnetic interference shielding effectiveness of 35.0 dB mainly through electromagnetic wave absorption. This multimode electromagnetic shielding fabric can switch between cooling and heating modes to adapt to dynamic cooling and heating scenarios, providing a new avenue for sustainable temperature management and electromagnetic protection applications.

Inactivation of SARS-CoV-2 Spike Protein Pseudotyped Virus Infection Using ACE2-Tethered Gold Nanorods under Near-Infrared Laser Irradiation

Since the angiotensin-converting enzyme 2 (ACE2) protein is abundant on the surface of respiratory cells in the lungs, it has been confirmed to be the entry-point receptor for the spike glycoprotein of SARS-CoV-2. As such, gold nanorods (AuNRs) functionalized with ACE2 ectodomain (ACE2ED) act not only as decoys for these viruses to keep them from binding with the ACE2-expressing cells but also as agents to ablate infectious virions through heat generated from AuNRs under near-infrared (NIR) laser irradiation. Using plasmid containing the SARS-CoV-2 spike protein gene (with a D614G mutation), spike protein pseudotyped viral particles with a lentiviral core and green fluorescent protein reporter were constructed and used for transfecting ACE2-expressing HEK293T cells. Since these viral particles behave like their coronavirus counterparts, they are the ideal surrogates of native virions for studying viral entry into host cells. Our results showed that, once the surrogate pseudoviruses with spike protein encounter ACE2ED-tethered AuNRs, these virions are entrapped, resulting in decreased viral infection to ACE2-expressing HEK293T cells. Moreover, the effect of photothermolysis created by ACE2ED-tagged AuNRs under 808-nm NIR laser irradiation for 5 min led to viral breakdown. In summary, ACE2ED-tethered AuNRs with dual functions (virus decoy and destruction) could have an intriguing advantage in the treatment of diseases involving rapidly mutating viral species such as SARS-CoV-2.

Colloidal Multiscale Assembly via Photothermally Driven Convective Flow for Sensitive In-Solution Plasmonic Detections

The assembly of metal nanoparticles and targets to be detected in a small light probe volume is essential for achieving sensitive in-solution surface-enhanced Raman spectroscopy (SERS). Such assemblies generally require either chemical linkers or templates to overcome the random diffusion of the colloids unless the aqueous sample is dried. Here, a facile method is reported to produce 3D multiscale assemblies of various colloids ranging from molecules and nanoparticles to microparticles for sensitive in-solution SERS detection without chemical linkers and templates by exploiting photothermally driven convective flow. The simulations suggest that colloids sub 100 nm in diameter can be assembled by photothermally driven convective flow regardless of density; the assembly of larger colloids up to several micrometers by convective flow is significant only if their density is close to that of water. Consistent with the simulation results, the authors confirm that the photothermally driven convective flow is mainly responsible for the observed coassembly of plasmonic gold nanorods with either smaller molecules or larger microparticles. It is further found that the coassembly with the plasmonic nanoantennae leads to dramatic Raman enhancements of molecules, microplastics, and microbes by up to fivefold of magnitude compared to those measured in solution without the coassembly.

Sandwich-Structured Carbon Paper/Metal-Organic Framework Monoliths for Flexible Solar-Powered Atmospheric Water Harvesting On Demand

Solar-powered atmospheric water harvesting (AWH) with metal-organic frameworks (MOFs) has been recognized as an attractive way to alleviate water shortage stress in rural arid areas given the naturally abundant solar energy. However, the existing solar-powered AWH technologies only allow a singular water production mode: either solar heating-driven AWH which usually results in rather poor water productivity due to the limited availability of sufficient sunlight or conductive heating-driven all-day AWH with significantly improved water productivity but requiring additional electricity provided with a photovoltaic module. This greatly limits the flexibility in managing AWH based on climate conditions, water productivity, and energy cost. Herein, a sandwich-structured MOF monolith (denoted as CACS) with dual heating capacity, localized solar heating (LSH) and electrical heating (LEH), is presented. Compared with LSH, the use of LEH leads to more rapid and uniform heating of CACS monoliths, thereby driving a significantly enhanced water desorption efficiency with faster kinetics. Using the CACS monolith as an AWH sorbent, a new type of atmospheric water harvester is developed and able to produce water in multiple working modes: LSH-, LEH-, and LSH-/LEH-driven AWH, thereby enabling flexible AWH on demand: direct use of sunlight for LSH-driven AWH during the sunlight-sufficient day and/or LEH-driven all-day AWH powered by a photovoltaic module particularly during the sunlight-absent/-insufficient time (night or cloudy day). When working at the LSH-/LEH-driven AWH mode, the resulting prototype delivers 1.4 L_H2O kg_MOF^-1 day^-1 of water productivity with 2.3 kW·h L^-1_H2O of energy consumption, corresponding to 5.4 times higher water productivity than the LSH-driven AWH working mode alone and 17.9% of energy saving at the cost of 22.2% of water productivity reduction compared with the LEH-driven AWH working mode alone. The current work, therefore, demonstrates a novel solar-powered AWH strategy that enables all-day water production with flexible choices on AWH working modes in terms of climate conditions, desired water productivity, and energy cost.

Stimulation of Local Cytosolic Calcium Release by Photothermal Heating for Studying Intra- and Intercellular Calcium Waves

A methodology is described that allows for localized Ca²⁺ release by photoexcitation. For this, cells are loaded with polymer capsules with integrated plasmonic nanoparticles, which reside in endo-lysosomes. The micrometer-sized capsules can be individually excited by near-infrared light from a light pointer, causing photothermal heating, upon which there is a rise in the free cytosolic Ca²⁺ concentration ([Ca²⁺ ]_i ). The [Ca²⁺ ]_i can be analyzed with a Ca²⁺ indicator fluorophore. In this way, it is possible to excite local lysosomal Ca²⁺ release in a desired target cell.

Plasmonic Nanocomposite Implants for Interstitial Thermotherapy: Experimental and Computational Analysis

The ferromagnetic implant (thermoseeds) technique offers desirable features for interstitial thermotherapy. However, its efficacy has been reported to be limited by issues that are related to the properties of the metal alloys that are used to fabricate them and the high number of thermoseeds needed to achieve therapeutic temperature levels. Here, we present the results of a combination of experimental and computational analysis of plasmonic nanocomposite implants (photoseeds)—a combination of Au nanoparticles (NPs) and poly-dimethylsiloxane (PDMS)—as a model material. We performed structural and optical characterization of the Au NPs and repared Au-PDMS nanocomposites, followed by an elucidation of the heat generation capabilities of the Au-PDMS photoseeds in aqueous solution and in-vitro cancer cell suspension. Based on the experimental results, we developed a three-dimensional (3D) finite element method (FEM) model to predict in-vivo thermal damage profiles in breast tissue. The optical absorbance of the Au-PDMS photoseeds were increasing with the concentration of Au NPs. The photothermal measurements and the in-vivo predictions showed that the photothermal properties of the photoseeds, characteristics of the laser sources, and the duration of heating can be tuned to achieve therapeutic temperature levels under in-vitro and in-vivo conditions. Collectively, the results demonstrate the feasibility of using photoseeds for interstitial thermotherapy.

Cryopreservation and Laser Nanowarming of Zebrafish Embryos Followed by Hatching and Spawning

This study shows for the first time the ability to rewarm cryopreserved zebrafish embryos that grow into adult fish capable of breeding normally. The protocol employs a single injection of cryoprotective agents (CPAs) and gold nanorods (GNRs) into the yolk and immersion in a precooling bath to dehydrate the perivitelline space. Then embryos are encapsulated within CPA and GNR droplets, plunged into liquid nitrogen, cryogenically stabilized, and rewarmed by a laser pulse. Postlaser nanowarming, embryos (n = 282) exhibit intact structure by 1 h (40%), continued development after 3 h (22%), movement after 24 h (11%), hatching after 48 h (9%), and swimming after Day 5 (3%). Finally, from fish that survives till Day 5, two larvae are grown to adulthood and spawned, yielding survival comparable to an unfrozen control. Future efforts will focus on improving the survival to adulthood and developing methods to cryopreserve large numbers of embryos for research, aquaculture, and biodiversity preservation.

Quantitative Assessment of Endosomal Escape of Various Endocytosed Polymer-Encapsulated Molecular Cargos upon Photothermal Heating

Encapsulated molecular cargos are efficiently endocytosed by cells. For cytosolic delivery, understanding the dynamic process of cargos release from the carrier vehicles used for encapsulation and the lysosomes where the carrier vehicles are trapped (which in general is the bottleneck), followed by diffusion in the cytosol is important for improving drug/gene delivery strategies. A methodology is reported to image this process on a millisecond scale and to quantitatively analyze the data. Polyelectrolyte capsules with embedded gold nanostars to encapsulate 43 fluorescent molecular cargos with diverse properties, ranging from small fluorophores to fluorescently labeled proteins, siRNA, etc., are used. By short laser irradiation intracellular release of the molecular cargos from endocytosed capsules into the cytosol is triggered, and their intracellular spreading is imaged. Most of the released molecular cargos evenly distribute inside the entire cell, while others are enriched in certain cell compartments. The time the different molecular cargos take to distribute within cells, i.e., the spreading time, is used as a quantifier. Quantitative analysis reveals that intracellular spread cannot be described by free diffusion, but is determined by interaction of the molecular cargo with intracellular components.

Fluorescent Polymer-MoS2-Embedded Microgels for Photothermal Heating and Colorimetric Monitoring

Photothermal heating with accurate monitoring of local temperature in complex biological fluids is crucial for therapeutic accuracy. Herein, photothermal microgels are developed to heat microscopic volumes through photothermal conversion and report the local temperature with a colorimetric response. The microgels consist of poly(ethylene glycol)-based hydrogels, which integrate temperature-responsive block-copolymer-grafted MoS₂ nanosheets (BCP-grafted MoS₂ NSs). The MoS₂ NSs are used as a fluorescence quencher as well as an efficient photothermal agent, with their surface decorated with three distinct temperature-responsive BCPs containing blue-, green-, and red-fluorescent dyes. Upon irradiation of near-infrared light, MoS₂ NSs convert the radiation into heat, and the BCPs change their conformation depending on the local temperature, selectively activating Förster resonance energy transfer of the three dyes. The use of three distinct BCPs and dyes enables the measurement of temperature in a wide range (i.e., from 25 to 50 °C). Importantly, the hydrogel matrix excludes molecules larger than the limiting mesh size so that BCP-grafted MoS₂ NSs remain free from contamination against large adhesive proteins such as albumin, thus maintaining their sensitivity even in complex fluids.

Experimental and Theoretical Observation of Photothermal Chirality in Gold Nanoparticle Helicoids

Single-particle spectroscopy is central to the characterization of plasmonic nanostructures and understanding of light-matter interactions in chiral nanosystems. Although chiral plasmonic nanostructures are generally characterized by their circular differential extinction and scattering, single-particle absorption studies can extend our understanding of light-matter interactions. Here, we introduce an experimental observation of photothermal chirality which originated from circular differential absorption of chiral plasmonic nanostructures. Using luminescence ratio thermometry, we identify the optical and photothermal handedness and an absolute temperature difference of 6 K under the right and left circularly polarized light. We observe a circular differential extinction parameter (g_ext) of -0.13 in colloidally prepared gold helicoids and compare our findings with numerical simulations using finite element methods. The simulated data showed that circular differential absorption and the maximum temperature of a small cluster of helical nanoparticles are polarization-dependent. We observed an intensity-dependent photothermal g-factor from chiral helicoids that decreases slightly at higher temperatures. We also measure a range of optical g-factors from several gold helicoids, which are attributed to the heterogeneity of helicoids in nanoparticles during synthesis. The principles of differential photothermal response of chiral nanomaterials and heat generation described here can be potentially used for thermal photocatalysis, energy conversion, and electronic applications.

Characterization of Laser Gold Nanowarming: A Platform for Millimeter-Scale Cryopreservation

Preventing ice formation during cryopreservation by vitrification has led to the successful storage and banking of numerous cellular- and tissue-based biomaterials. In their breakthrough work, Peter Mazur's group achieved over 90% survival by using a laser warming technique for 100 μm mice oocytes that were cooled in 0.1 μL droplets with 2.3 M CPA and extracellularly loaded India ink (laser absorber). Laser warming can provide rapid and uniform warming rates to "outrun" damaging ice crystal growth. Here we generalize Mazur's technique for microliter-sized droplets using laser nanowarming to rewarm millimeter-scale biomaterials when loaded extracellularly and/or intracellularly with biocompatible 1064 nm resonant gold nanoparticles. First, we show that droplets containing low-concentration cryoprotectants (such as 2 M propylene glycol ± 1 M trehalose) can be rapidly cooled at rates up to 90 000 °C/min by plunging into liquid nitrogen to achieve either a visually transparent state (i.e., vitrified) or a cloudy with ice (i.e., nonvitrified) state. Both modeling and experiments were then used to characterize the laser nanowarming process for different laser energy (2-6 J), pulse length (1-20 ms), droplet volume (0.2-1.8 μL), cryoprotectant (2-3 M), and gold concentration (0.77 × 10¹⁷-4.8 × 10¹⁷ nps/m³) values to assess physical and biological success. Physical success was achieved by finding conditions that minimize cloudiness and white spots within the droplets during cooling and warming as signs of damaging ice formation and ice crystallization, respectively. Biological success was achieved using human dermal fibroblasts to find conditions that achieve ≥90% cell viability normalized to controls postwarming. Thus, physical and biological success can be achieved using this platform cryopreservation approach of rapid cooling and laser gold nanowarming in millimeter-scale systems.

Croconaine Rotaxane Dye with 984 nm Absorption: Wavelength-Selective Photothermal Heating

Croconaines are an emerging class of near-infrared dyes that are useful for various sensing, photothermal, optoelectronic, and photoacoustic applications. Previous work encapsulated a dumbbell-shaped croconaine dye whose structure contains two thiophene flanking units inside a tetralactam macrocycle and produced a croconaine rotaxane 1 with a narrow 824 nm absorption band. Herein, a new rotaxane 2 is reported that encapsulates a croconaine dye with two thienothiophene flanking units. The new croconaine rotaxane 2 exhibits a narrow 984 nm absorption band that is distinct from the 824 nm absorption of rotaxane 1. Photothermal heating experiments showed that an 830 nm diode laser selectively heats a solution containing rotaxane 1, with no heating of a solution containing rotaxane 2. Conversely, a 980 nm diode laser selectively heats a solution containing rotaxane 2, with no heating of a solution containing rotaxane 1. The new croconaine rotaxane 2 shows no fatigue after four cycles of laser heating and cooling.

Light-Induced Thermal Gradients in Ruthenium Catalysts Significantly Enhance Ammonia Production

Industrial scale catalytic chemical synthesis demands both high reaction rates and high product yields. In exothermic chemical reactions, these conflicting objectives require a complex balance of optimized catalysts, high temperatures, high pressures, and multiple recycling steps, as in the energy-intensive Haber-Bosch process for ammonia synthesis. Here we report that illumination of a conventional ruthenium-based catalyst produces ammonia with high reaction rates and high conversion yields. Indeed, using continuous wave light-emitting diodes that simulate concentrated solar illumination, ammonia is copiously produced without any external heating or elevated pressures. The possibility of nonthermal plasmonic effects are excluded by carefully comparing the catalytic activity under direct and indirect illumination. Instead, thermal gradients, created and controlled by photothermal heating of the illuminated catalyst surface, are shown to be responsible for the high reaction rates and conversion yields. This nonisothermal environment enhances both by balancing the conflicting requirements of kinetics and thermodynamics, heralding the use of optically controlled thermal gradients as a universal, scalable strategy for the catalysis of many exothermic chemical reactions.

Photothermally Assisted Thinning of Silicon Nitride Membranes for Ultrathin Asymmetric Nanopores

Sculpting solid-state materials at the nanoscale is an important step in the manufacturing of numerous types of sensor devices, in particular solid-state nanopore sensors. Here we present mechanistic insight into laser-induced thinning of low-stress silicon nitride (SiN _x) membranes and films. In a recent study, we observed that focusing a visible wavelength laser beam on a SiN _x membrane results in efficient localized heating, and we used this effect to control temperature at a solid-state nanopore sensor. A side-effect of the observed heating was that the pores expand/degrade under prolonged high-power illumination, prompting us to study the mechanism of this etching process. We find that SiN _x can be etched under exposure to light of ∼10⁷ W/cm² average intensity, with etch rates that are influenced by the supporting electrolyte. Combining this controlled etching with dielectric breakdown, an electrokinetic process for making pores, nanopores of arbitrary dimensions as small as 1-2 nm in diameter and thickness can easily be fabricated. Evidence gathered from biomolecule-pore interactions suggests that the pore geometries obtained using this method are more funnel-like, rather than hourglass-shaped. Refined control over pore dimensions can expand the range of applications of solid-state nanopores, for example, biopolymer sequencing and detection of specific biomarkers.

Remote Control of Mammalian Cells with Heat-Triggered Gene Switches and Photothermal Pulse Trains

Engineered T cells are transforming broad fields in biomedicine, yet our ability to control cellular activity at specific anatomical sites remains limited. Here we engineer thermal gene switches to allow spatial and remote control of transcriptional activity using pulses of heat. These gene switches are constructed from the heat shock protein HSP70B' (HSPA6) promoter, show negligible basal transcriptional activity, and activate within an elevated temperature window of 40-45 °C. Using engineered Jurkat T cells implanted in vivo, we use plasmonic photothermal heating to trigger gene expression at specific sites to levels greater than 200-fold. We show that delivery of heat as thermal pulse trains significantly increase cellular thermal tolerance compared to continuous heating curves with identical area-under-the-curve (AUC), enabling long-term control of gene expression in Jurkat T cells. This approach expands the toolkit of remotely controlled genetic devices for basic and translational applications in synthetic immunology.

Photothermally Amplified Therapeutic Liposomes for Effective Combination Treatment of Cancer

Near-infrared photothermal therapy has been investigated extensively with regard to selective tumor eradication, yet its clinical translation has been limited because of the absence of FDA-approvable agents with effective phototherapeutic function and minimal systemic toxicity. In this work, we developed photothermally amplified therapeutic liposomes in an attempt to synergize chemotherapy and hyperthermia for effective cancer phototherapy. The anticancer drug cisplatin and the photothermal agent indocyanine green (ICG) were encapsulated in a thermosensitive liposomal formulation at the lipid/ICG ratio maximizing the ICG loading efficiency. These liposomes released cytotoxic cisplatin molecules selectively via ICG-mediated photothermal stimulation. In phototherapeutic studies, these liposomes amplified therapeutic effects both in vitro in cancer cells and in vivo in mouse tumor models significantly over chemotherapy or photothermal therapy alone. We believe that these photothermally amplified therapeutic liposomes composed solely of already FDA-approved components (cisplatin, ICG, and phospholipids) have enormous potential for clinical translation in treating various tumors compatible with laser irradiation.

Photothermal Nanoparticle Initiation Enables Radical Polymerization and Yields Unique, Uniform Microfibers with Broad Spectrum Light

Photothermal processes are utilized across a variety of fields, from separations to medicine, and are an area of active research. Herein, the action of a solar simulator upon carbon black nanoparticles is shown to result in photothermally initiated chain-growth polymerization of methyl acrylate, butyl acrylate, and methyl methacrylate initiated by benzoyl peroxide. With use of methyl acrylate as the model system, products from this reaction are shown to be apparently indistinguishable on the molecular level, but result in unique microstructures relative to the thermal controls. The relative contribution of bands of the UV/visible spectrum to the polymerization initiation show that red/infrared wavelengths are most important for the initiation to occur. Kinetic analysis of the initiator homolysis indicate that the apparent reaction rate is accelerated in the photothermal condition.

Understanding Resonant Light-Triggered DNA Release from Plasmonic Nanoparticles

Nanoparticle-based platforms for gene therapy and drug delivery are gaining popularity for cancer treatment. To improve therapeutic selectivity, one important strategy is to remotely trigger the release of a therapeutic cargo from a specially designed gene- or drug-laden near-infrared (NIR) absorbing gold nanoparticle complex with NIR light. While there have been multiple demonstrations of NIR nanoparticle-based release platforms, our understanding of how light-triggered release works in such complexes is still limited. Here, we investigate the specific mechanisms of DNA release from plasmonic nanoparticle complexes using continuous wave (CW) and femtosecond pulsed lasers. We find that the characteristics of nanoparticle-based DNA release vary profoundly from the same nanoparticle complex, depending on the type of laser excitation. CW laser illumination drives the photothermal release of dehybridized single-stranded DNA, while pulsed-laser excitation results in double-stranded DNA release by cleavage of the Au-S bond, with negligible local heating. This dramatic difference in DNA release from the same DNA-nanoparticle complex has very important implications in the development of NIR-triggered gene or drug delivery nanocomplexes.

Clean Photothermal Heating and Controlled Release from Near-Infrared Dye Doped Nanoparticles without Oxygen Photosensitization

The photothermal heating and release properties of biocompatible organic nanoparticles, doped with a near-infrared croconaine (Croc) dye, were compared with analogous nanoparticles doped with the common near-infrared dyes ICG and IR780. Separate formulations of lipid-polymer hybrid nanoparticles and liposomes, each containing Croc dye, absorbed strongly at 808 nm and generated clean laser-induced heating (no production of (1)O2 and no photobleaching of the dye). In contrast, laser-induced heating of nanoparticles containing ICG or IR780 produced reactive (1)O2, leading to bleaching of the dye and also decomposition of coencapsulated payload such as the drug doxorubicin. Croc dye was especially useful as a photothermal agent for laser-controlled release of chemically sensitive payload from nanoparticles. Solution state experiments demonstrated repetitive fractional release of water-soluble fluorescent dye from the interior of thermosensitive liposomes. Additional experiments used a focused laser beam to control leakage from immobilized liposomes with very high spatial and temporal precision. The results indicate that fractional photothermal leakage from nanoparticles doped with Croc dye is a promising method for a range of controlled release applications.

Spatial temperature mapping within polymer nanocomposites undergoing ultrafast photothermal heating via gold nanorods

Heat emanates from gold nanorods (GNRs) under ultrafast optical excitation of the localized surface plasmon resonance. The steady state nanoscale temperature distribution formed within a polymer matrix embedded with GNRs undergoing pulsed femtosecond photothermal heating is determined experimentally using two independent ensemble optical techniques. Physical rotation of the nanorods reveals the average local temperature of the polymer melt in the immediate spatial volume surrounding each rod while fluorescence of homogeneously-distributed perylene molecules monitors temperature over sample regions at larger distances from the GNRs. Polarization-sensitive fluorescence measurements of the perylene probes provide an estimate of the average size of the quasi-molten region surrounding each nanorod (that is, the boundary between softened polymer and solid material as the temperature decreases radially away from each particle) and distinguishes the steady state temperature in the solid and melt regions. Combining these separate methods enables nanoscale spatial mapping of the average steady state temperature distribution caused by ultrafast excitation of the GNRs. These observations definitively demonstrate the presence of a steady-state temperature gradient and indicate that localized heating via the photothermal effect within materials enables nanoscale thermal manipulations without significantly altering the bulk sample temperature in these systems. These quantitative results are further verified by re-orienting nanorods within a solid polymer nanofiber without inducing any morphological changes to the highly temperature-sensitive nanofiber surface. Temperature differences of 70-90 °C were observed over a distances of ∼ 100 nm.