Antifouling and Antibacterial Properties Constructed by Quaternary Ammonium and Benzyl Ester Derived from Lysine Methacrylamide

Mechanism of the antimicrobial activity induced by phosphatase inhibitor sodium ortho-vanadate

The present study describes a novel antimicrobial mechanism based on Sodium Orthovanadate (SOV), an alkaline phosphatase inhibitor. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM) were employed to examine the surface morphologies of the test organism, Escherichia coli (E. coli), during various antibacterial phases. Our results indicated that SOV kills bacteria by attacking cell wall growth and development, leaving E. coli's outer membrane intact. Our antimicrobial test indicated that the MIC of SOV for both E. coli and Lactococcus lactis (L. lactis) is 40 μM. A combination of quantum mechanical calculations and vibrational spectroscopy revealed that divanadate from SOV strongly coordinates with Ca2+ and Mg2+, which are the activity centers for the phosphatase that regulates bacterial cell wall synthesis. The current study is the first to propose the antibacterial mechanism caused by SOV attacking cell wall.

Dual Antibacterial Properties of Copper-Coated Nanotextured Stainless Steel

Bacterial adhesion to stainless steel, an alloy commonly used in shared settings, numerous medical devices, and food and beverage sectors, can give rise to serious infections, ultimately leading to morbidity, mortality, and significant healthcare expenses. In this study, Cu-coated nanotextured stainless steel (nSS) fabrication have been demonstrated using electrochemical technique and its potential as an antibiotic-free biocidal surface against Gram-positive and negative bacteria. As nanotexture and Cu combine for dual methods of killing, this material should not contribute to drug-resistant bacteria as antibiotic use does. This approach involves applying a Cu coating on nanotextured stainless steel, resulting in an antibacterial activity within 30 min. Comprehensive characterization of the surface revealing that the Cu coating consists of metallic Cu and oxidized states (Cu2+ and Cu+), has been performed by this study. Cu-coated nSS induces a remarkable reduction of 97% in Gram-negative Escherichia coli and 99% Gram-positive Staphylococcus epidermidis bacteria. This material has potential to be used to create effective, scalable, and sustainable solutions to prevent bacterial infections caused by surface contamination without contributing to antibiotic resistance.

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Quaternary ammonium salts for water treatment with balanced rate of sterilization and degradation

The growing number of infections caused by drug-resistant bacteria which arise from the overuse of antibiotics has severely affected the normal operation of human society. The high antibacterial activity of QAS makes it promising as an alternative to antibiotics, but it suffers from secondary pollution due to its non-degradation. Here we have synthesized a class of gemini quaternary ammonium salts (GQAS) with different carbon chain lengths containing ester groups by using facile methylation reaction. Quaternary ammonium groups contribute to insert negatively charged bacterial membranes, resulting in membrane damage and bacteria death. Compared with conventional single-chain QAS, except for the more efficient antibacterial efficiency attribute to the presence of the second carbon chain, GQAS with alterable antibacterial properties can minimize the possibility of bacterial resistance and reduce the accumulation of GQAS in the environment through the introduction of degradable ester groups. GQAS is completely superior to the commercial bactericide benzalkonium chloride (BAC) in both antibacterial activity and degrade performance, which can be used as a more environmentally friendly bactericide.

Advances in reparative materials for infectious bone defects and their applications in maxillofacial regions

Infectious bone defects are characterized by the partial loss or destruction of bone tissue resulting from bacterial contaminations subsequent to diseases or external injuries. Traditional bone transplantation and clinical methods are insufficient in meeting the treatment demands for such diseases. As a result, researchers have increasingly focused on the development of more sophisticated biomaterials for improved therapeutic outcomes in recent years. This review endeavors to investigate specific reparative materials utilized for the treatment of infectious bone defects, particularly those present in the maxillofacial region, with a focus on biomaterials capable of releasing therapeutic substances, functional contact biomaterials, and novel physical therapy materials. These biomaterials operate via heightened antibacterial or osteogenic properties in order to eliminate bacteria and/or stimulate bone cells regeneration in the defect, ultimately fostering the reconstitution of maxillofacial bone tissue. Based upon some successful applications of new concept materials in bone repair of other parts, we also explore their future prospects and potential uses in maxillofacial bone repair later in this review. We highlight that the exploration of advanced biomaterials holds promise in establishing a solid foundation for the development of more biocompatible, effective, and personalized treatments for reconstructing infectious maxillofacial defects.

Measurement of the Adhesion Force of a Living Sessile Organism on Antifouling Coating Surfaces Prepared with Polysulfobetaine-Grafted Particles

An antifouling polymer brush-like structure was fabricated by a simple and versatile dip-coating method of sulfobetaine containing copolymer-grafted silica nanoparticles (SiNPs) and alkyl diiodide cross-linkers. Surface-initiated atom transfer radical copolymerization of 3-(N-2-methacryloyloxyethyl-N,N-dimethyl)ammonatopropanesulfonate (MAPS) and N,N-dimethylaminoethyl methacrylate (DMAEMA) was carried out from initiator-immobilized SiNPs to give poly(MAPS-co-DMAEMA)-grafted SiNPs (MAPS/DMAEMA = 9/1, mol/mol) with diameters of 150-170 nm. The SiNP-g-copolymer/2,2,2-trifluoroethanol solution was dip-coated on silicon and glass substrates. Successive treatment with 1,4-diiodobutane in methanol gave a hydrophilic cross-linked coating film for the SiNP-g-copolymer. The cross-linked particle brushes did not peel off from the substrate even after washing with water in an ultrasonic cleaner despite the simple physical absorption of the SiNP-g-copolymer on the substrate surface. The adhesion force of the tentacle of a living barnacle cyprid on a glass surface covered with the cross-linked SiNP-g-copolymer was directly measured by scanning probe microscopy in seawater. The coating film exhibited extremely low adhesion to the cypris larva in the seawater, expecting this to be an effective antifouling property.

Constructing a Photothermal and Quaternary Ammonium Cation Bactericidal Platform onto SEBS for Synergistic Therapy

Poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) with eminent elasticity, thermoplastic ability, and biological stability has aroused great interest in the medical area. However, bacteria can easily adhere to the hydrophobic SEBS surface to cause medical device-related infections. In this work, SEBS is modified to prepare the SEBS-polydopamine (PDA)-poly(lysine) quaternary ammonium derivative (PLQ) antibacterial surface by PDA deposition and surface grafting techniques to solve bacterial infections. PDA is used as an intermediate layer and presents an excellent photothermal effect. The grafted polymer PLQ has antimicrobial quaternary ammonium cation groups, which plays synergistic bactericidal therapy with PDA. The SEBS-PDA-PLQ surface almost totally suppresses the growth of bacteria with a surface bacterial survival rate of 0.05% under laser irradiation. The outstanding antibacterial activity of the SEBS-PDA-PLQ surface is attributed to the synergistic effects of the photothermal performance of PDA and quaternary ammonium cationic functional groups of PLQ. In addition, the membrane SEBS-PDA-PLQ shows good hydrophilicity, antiprotein adsorption ability, chemical stability, and biocompatibility. This antibiotic-free antimicrobial approach has great potential for practical application in solving infections associated with medical devices.

Quaternary Ammonium Salts: Insights into Synthesis and New Directions in Antibacterial Applications

The overuse of antibiotics has led to the emergence of a large number of antibiotic-resistant genes in bacteria, and increasing evidence indicates that a fungicide with an antibacterial mechanism different from that of antibiotics is needed. Quaternary ammonium salts (QASs) are a biparental substance with good antibacterial properties that kills bacteria through simple electrostatic adsorption and insertion into cell membranes/altering of cell membrane permeability. Therefore, the probability of bacteria developing drug resistance is greatly reduced. In this review, we focus on the synthesis and application of single-chain QASs, double-chain QASs, heterocyclic QASs, and gemini QASs (GQASs). Some possible structure-function relationships of QASs are also summarized. As such, we hope this review will provide insight for researchers to explore more applications of QASs in the field of antimicrobials with the aim of developing systems for clinical applications.

Dual drug-loaded hydrogels with pH-responsive and antibacterial activity for skin wound dressing

Antibacterial and hemostatic properties are essential for wound healing dressing. In this study, a new type of hydrogel composed of gelatin methacryloyl (GelMA) and hyaluronic acid-aldehyde (HA-CHO) is fabricated by photo-crosslinking and respectively loaded with a single drug gentamicin sulfate (GS), and two drugs of GS and lysozyme (LZM). The composite hydrogel of GelMA and HA-CHO is successfully synthesized by the aldehyde and Schiff base reactions. The structures and compositions of the hydrogels with and without drug loaded are characterized by FT-IR, ¹H NMR, and XPS. Furthermore, the microstructure and swelling behaviour of hydrogels prove that the content of HA-CHO has a significant role in the formation of hydrogels with dense porous structures and super absorbent. pH 7.4 and pH 5.0 conditions are used to evaluate the drug release behaviour of the obtained hydrogels. The released amount of GS of the drug-loaded hydrogels in the acidic buffer is more than that of the physiological environment because of the cleaved Schiff base bonds and the electrostatic interaction. Especially for the dual drug-loaded hydrogel GelMA/HA-CHO/GS/LZM, the released ratio of GS is elevated from 59 % in pH 7.4 buffer to about 78 % in pH 5.0 buffer within the first 6 h, which verifies the excellent pH-stimulus responsiveness. These endow the GS-LZM dual drug-loaded hydrogels with superior antibacterial efficiencies to that of the single GS drug-loaded hydrogels, no drug-loaded hydrogels, and SEBS control, especially in inhibiting S. aureus in a lower concentration of 10⁶ CFU mL^-1, which can be attributed to the synergistic effect of LZM and GS. For S. aureus at 10⁶ CFU mL^-1, the bacterial survival of GelMA/HA-CHO/GS/LZM is 1.1 %, which shows outstanding antibacterial effect. Hence, the drug-loaded hydrogels, especially the dual drug-loaded hydrogels with pH-responsive, antibacterial, and hemostatic properties have great potential as wound healing materials.

Immunomodulatory biomaterials for implant-associated infections: from conventional to advanced therapeutic strategies

Implant-associated infection (IAI) is increasingly emerging as a serious threat with the massive application of biomaterials. Bacteria attached to the surface of implants are often difficult to remove and exhibit high resistance to bactericides. In the quest for novel antimicrobial strategies, conventional antimicrobial materials often fail to exert their function because they tend to focus on direct bactericidal activity while neglecting the modulation of immune systems. The inflammatory response induced by host immune cells was thought to be a detrimental force impeding wound healing. However, the immune system has recently received increasing attention as a vital player in the host's defense against infection. Anti-infective strategies based on the modulation of host immune defenses are emerging as a field of interest. This review explains the importance of the immune system in combating infections and describes current advanced immune-enhanced anti-infection strategies. First, the characteristics of traditional/conventional implant biomaterials and the reasons for the difficulty of bacterial clearance in IAI were reviewed. Second, the importance of immune cells in the battle against bacteria is elucidated. Then, we discuss how to design biomaterials that activate the defense function of immune cells to enhance the antimicrobial potential. Based on the key premise of restoring proper host-protective immunity, varying advanced immune-enhanced antimicrobial strategies were discussed. Finally, current issues and perspectives in this field were offered. This review will provide scientific guidance to enhance the development of advanced anti-infective biomaterials.

Chemical Modification of Silk Fibroin through Serine Amino Acid Residues

Silk fibroin (SF) is a natural protein polymer and promising biomaterial. Chemical modifications have attracted growing interest in expanding SF applications. However, the majority of amino acid residues in SF are non-reactive and most of the reactive ones are in the crystalline region. Herein, a modification was conducted to investigate the possibility of direct modification on the surface of natural SF by a reagent with a mild reactivity, the type and quantity of the residues involved in the reactions, and the structural changes upon modification. Infrared spectrum, ¹H NMR, titration and amino acid analyses, X-ray diffraction, and hemolysis test were used to analyze the materials. The results showed that sulfonic acid groups were grafted onto SF and the reaction occurred mainly at serine residues through hydroxyl groups. In total, 0.0958 mmol/g of residues participated in the modification with a modification efficiency of 7.6%. Moreover, the crystallinity and the content of β-sheet structure in SF increased upon modification. The modified material had good blood-compatibility. In conclusion, surface modification on native SF through serine residues was practicable and had the advantage of increased β-sheet structure. This will provide an alternative way for the modification of fibroin for the desired application in the biomedical field.

Ionic interaction-driven switchable bactericidal surfaces

Bacteria in the external environment inevitably invade the wound and subsequently colonize the wound surface during surgery and biomedical operations, which slows down the process of wound healing and tissue repair; this poses a significant threat to human health. Therefore, the development of an intelligent antibacterial surface has become the focus of research in the field of antimicrobial strategies, which has important social and economic significance. Here, we present a simple approach of producing an ionic interaction-driven anionic activation substratum which is then functionalized with cationic molecules through coulombic interactional immobilization. The switchable multifunctional antibacterial surface can decrease bacterial attachment and inactivate the attached microorganisms, thus overcoming the conventional challenge for antibacterial surfaces. Briefly, poly (3-sulfopropyl methacrylate potassium salt) (PSPMA) brushes were constructed by surface-initiated atom transfer radical polymerization on silicon or cotton fabric substrates, and a positive-charged component, namely lysozyme (LYZ), hexadecyl trimethyl ammonium bromide (CTAB) or chitosan (CS), was loaded on negative-charged sulfonate groups through electrostatic interactions. The resultant brush-grafted surfaces exhibited more than ∼95.5% bactericidal efficacy and ∼92.8% release rate after the introduction of an adequate amount of contra-ions (1.0 M; Na⁺ & Cl^-) against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, thus achieving a regenerated surface through the cyclic process of "assembly-dissociation". Smart cotton fabric (Fabric-PSPMA/LYZ and Fabric-PSPMA/CS) surfaces were constructed, which were found to promote wound epidermal tissue regeneration with a higher efficiency after 7-day in vivo studies. This ionic interaction-driven method used in the present work is simple and can reversibly renew antibacterial surfaces, which will help in the wider utilization of switchable antibacterial materials with a more ecologic and economic significance. STATEMENT OF SIGNIFICANCE: Smart antibacterial surfaces with renewable characteristics have attracted considerable interests over the past few years. Here, we used ionic interaction-driven force to manipulate dynamic conformational changes in PSPMA surface brushes, accompanied by highly switchable bacteria killing and bacteria releasing behaviors. Different cationic molecules were also designed for assembly/dissociation on the PSPMA-modified surfaces, and the essential parameters, including chemical structures, molecular weight, and cationic charge density, were investigated. With the refined structural combinations and the balance of bacteria killing/bacteria releasing behaviors, smart cotton fabrics (e.g., Fabric-PSPMA/lysozyme and Fabric-PSPMA/chitosan) were designed that could promote wound healing and tissue repair. These results contribute to the fundamental understanding of a switchable cationic-anionic pair design and the corresponding practical, renewable, highly antibacterial fabric.

Counterpropagating Gradients of Antibacterial and Antifouling Polymer Brushes

We report on the formation of counterpropagating density gradients in poly([2-dimethylaminoethyl] methacrylate) (PDMAEMA) brushes featuring spatially varying quaternized and betainized units. Starting with PDMAEMA brushes with constant grafting density and degree of polymerization, we first generate a density gradient of quaternized units by directional vapor reaction involving methyl iodide. The unreacted DMAEMA units are then betainized through gaseous-phase betainization with 1,3-propanesultone. The gas reaction of PDMAEMA with 1,3-propanesultone eliminates the formation of byproducts present during the liquid-phase modification. We use the counterpropagating density gradients of quaternized and betainized PDMAEMA brushes in antibacterial and antifouling studies. Completely quaternized and betainized brushes exhibit antibacterial and antifouling behaviors. Samples containing 12% of quaternized and 85% of betainized units act simultaneously as antibacterial and antifouling surfaces.

Surface Modification to Modulate Microbial Biofilms-Applications in Dental Medicine

Recent progress in materials science and nanotechnology has led to the development of advanced materials with multifunctional properties. Dental medicine has benefited from the design of such materials and coatings in providing patients with tailored implants and improved materials for restorative and functional use. Such materials and coatings allow for better acceptance by the host body, promote successful implantation and determine a reduced inflammatory response after contact with the materials. Since numerous dental pathologies are influenced by the presence and activity of some pathogenic microorganisms, novel materials are needed to overcome this challenge as well. This paper aimed to reveal and discuss the most recent and innovative progress made in the field of materials surface modification in terms of microbial attachment inhibition and biofilm formation, with a direct impact on dental medicine.

Surface Design for Antibacterial Materials: From Fundamentals to Advanced Strategies

Healthcare-acquired infections as well as increasing antimicrobial resistance have become an urgent global challenge, thus smart alternative solutions are needed to tackle bacterial infections. Antibacterial materials in biomedical applications and hospital hygiene have attracted great interest, in particular, the emergence of surface design strategies offer an effective alternative to antibiotics, thereby preventing the possible development of bacterial resistance. In this review, recent progress on advanced surface modifications to prevent bacterial infections are addressed comprehensively, starting with the key factors against bacterial adhesion, followed by varying strategies that can inhibit biofilm formation effectively. Furthermore, "super antibacterial systems" through pre-treatment defense and targeted bactericidal system, are proposed with increasing evidence of clinical potential. Finally, the advantages and future challenges of surface strategies to resist healthcare-associated infections are discussed, with promising prospects of developing novel antimicrobial materials.

Dual-Functional Surfaces Based on an Antifouling Polymer and a Natural Antibiofilm Molecule: Prevention of Biofilm Formation without Using Biocides

Pathogenic biofilms formed on the surfaces of implantable medical devices and materials pose an urgent global healthcare problem. Although conventional antibacterial surfaces based on bacteria-repelling or bacteria-killing strategies can delay biofilm formation to some extent, they usually fail in long-term applications, and it remains challenging to eradicate recalcitrant biofilms once they are established and mature. From the viewpoint of microbiology, a promising strategy may be to target the middle stage of biofilm formation including the main biological processes involved in biofilm development. In this work, a dual-functional antibiofilm surface is developed based on copolymer brushes of 2-hydroxyethyl methacrylate (HEMA) and 3-(acrylamido)phenylboronic acid (APBA), with quercetin (Qe, a natural antibiofilm molecule) incorporated via acid-responsive boronate ester bonds. Due to the antifouling properties of the hydrophilic poly(HEMA) component, the resulting surface is able to suppress bacterial adhesion and aggregation in the early stages of contact. A few bacteria are eventually able to break through the protection of the anti-adhesion layer leading to bacterial colonization. In response to the resulting decrease in the pH of the microenvironment, the surface could then release Qe to interfere with the microbiological processes related to biofilm formation. Compared to bactericidal and anti-adhesive surfaces, this dual-functional surface showed significantly improved antibiofilm performance to prevent biofilm formation involving both Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus for up to 3 days. In addition, both the copolymer and Qe are negligibly cytotoxic, thereby avoiding possible harmful effects on adjacent normal cells and the risk of bacterial resistance. This dual-functional design approach addresses the different stages of biofilm formation, and (in accordance with the growth process of the biofilm) allows sequential activation of the functions without compromising the viability of adjacent normal cells. A simple and reliable solution may thus be provided to the problems associated with biofilms on surfaces in various biomedical applications.

Micro-and-nanometer topological gradient of block copolymer fibrous scaffolds towards region-specific cell regulation

Regulating cell behavior and function by surface topography has drawn significant attention in tissue engineering. Herein, a gradient fibrous scaffold comprising anisotropic aligned fibers and isotropic annealed fibers was developed to provide a controllable direction of cell migration, adhesion, and spreading. The electrospun aligned fibers were engraved to create surface gradients with micro-and-nanometer roughness through block copolymer (BCP) self-assembly induced by selective solvent vapor annealing (SVA). The distinct manipulation of cell behavior by annealed fibrous scaffolds with tailored self-assembled nanostructure and welded fibrous microstructure has been illustrated by in situ/ex situ small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and in vitro cell culture. Further insights into the effect of integrated gradient fibrous scaffold were gained at the level of protein expression. From the perspective of gradient topology, this region-specific scaffold based on BCP fibers shows the prospect of guiding cell migration, adhesion and spreading and provides a generic method for designing biomaterials for tissue-engineering.

Conducting Polyetheretherketone Nanocomposites with an Electrophoretically Deposited Bioactive Coating for Bone Tissue Regeneration and Multimodal Therapeutic Applications

The use of polyetheretherketone (PEEK) has grown exponentially in the biomedical field in recent decades because of its outstanding biomechanical properties. However, its lack of bioactivity/osteointegration remains an unresolved issue toward its wide use in orthopedic applications. In this work, graphene nanosheets have been incorporated into PEEK to obtain multifunctional nanocomposites. Because of the formation of an electrical percolation network and the π-π* conjugation between graphene and PEEK, the resulting composites have achieved 12 orders of magnitude enhancement in their electrical conductivity and thereby enabled electrophoretic deposition of a bioactive/antibacterial coating consisting of stearyltrimethylammonium chloride-modified hydroxyapatite. The coated composite implant shows significant boosting of bone marrow mesenchymal stem cell proliferation in vitro. In addition, the strong photothermal conversion effect of the graphene nanofillers has enabled laser-induced heating of our nanocomposite implants, where the temperature of the implant can reach 45 °C in 150 s. The unique multifunctionality of the implant has also been demonstrated for photothermal applications such as enhancing bacterial eradication and tumor cell inhibition, as well as bone tissue regeneration in vivo. The results suggest the strong potential of our multifunctional implant in bone repair applications as well as multimodal therapy of challenging bone diseases such as osteosarcoma and osteomyelitis.

Self-Adaptive Antibacterial Coating for Universal Polymeric Substrates Based on a Micrometer-Scale Hierarchical Polymer Brush System

Surface-tethered hierarchical polymer brushes find wide applications in the development of antibacterial surfaces due to the well-defined spatial distribution and the separate but complementary properties of different blocks. Existing methods to achieve such polymer brushes mainly focused on inorganic material substrates, precluding their practical applications on common medical devices. In this work, a hierarchical polymer brush system is proposed and facilely constructed on polymeric substrates via light living graft polymerization. The polymer brush system with micrometer-scale thickness exhibits a unique hierarchical architecture consisting of a poly(hydroxyethyl methacrylate) (PHEMA) outer layer and an anionic inner layer loading with cationic antimicrobial peptide (AMP) via electrostatic attraction. The surface of this system inhibits the initial adhesion of bacteria by the PHEMA hydration outer layer under neutral pH conditions; when bacteria adhere and proliferate on this surface, the bacterially induced acidification triggers the cleavage of labile amide bonds within the inner layer to expose the positively charged amines and vigorously release melittin (MLT), allowing the surface to timely kill the adhering bacteria. The hierarchical surface employs multiple antibacterial mechanisms to combat bacterial infection and shows high sensitiveness and responsiveness to pathogens. A new paradigm is supplied by this modular hierarchical polymer brushes system for the progress of intelligent surfaces on universal polymer substrates, showing great potential to a promising strategy for preventing infection related to medical devices.

The synergistic effect of hierarchical structure and alkyl chain length on the antifouling and bactericidal properties of cationic/zwitterionic block polymer brushes

A well-organized hierarchical structure and appropriate alkyl chain length facilitate the synergistic anti-biofilm effect.