Unusual Stability and Temperature-Dependent Properties of Highly Emissive CsPbBr3 Perovskite Nanocrystals Obtained from in Situ Crystallization in Poly(vinylidene difluoride)

A Novel Strategy for the Synthesis of High Stability of Luminescent Zero Dimensional-Two Dimensional CsPbBr3 Quantum Dot/1,4-bis(4-methylstyryl)benzene Nanoplate Heterostructures at an Atmospheric Condition

Perovskite quantum dots (QDs), emerging with excellent bright-green photoluminescence (PL) and a large absorption coefficient, are of great potential for the fabrication of light sources in underwater optical wireless communication systems. However, the instability caused by low formation energy and abundant surface traps is still a major concern for perovskite-based light sources in underwater conditions. Herein, we propose ultra-stable zero dimensional-two dimensional (0D-2D) CsPbBr3 QD/1,4-bis(4-methylstyryl)benzene (p-MSB) nanoplate (NP) heterostructures synthesized via a facile approach at room temperature in air. CsPbBr3 QDs can naturally nucleate on the p-MSB NP toluene solution, and the radiative combination is drastically intensified owing to the electron transfer within the typical type-II heterostructures, leading to a sharply increased PLQY of the heterostructure thin films up to 200% compared with the pristine sample. The passivation of defects within CsPbBr3 QDs can be effectively realized with the existence of p-MSB NPs, and thus the obviously improved PL is steadily witnessed in an ambient atmosphere and thermal environment. Meanwhile, the enhanced humidity stability and a peak EQE of 9.67% suggests a synergetic strategy for concurrently addressing the knotty problems on unsatisfied luminous efficiency and stability of perovskites for high-performance green-emitting optoelectronic devices in underwater applications.

Spotlight on Luminescence Thermometry: Basics, Challenges, and Cutting-Edge Applications

Luminescence (nano)thermometry is a remote sensing technique that relies on the temperature dependency of the luminescence features (e.g., bandshape, peak energy or intensity, and excited state lifetimes and risetimes) of a phosphor to measure temperature. This technique provides precise thermal readouts with superior spatial resolution in short acquisition times. Although luminescence thermometry is just starting to become a more mature subject, it exhibits enormous potential in several areas, e.g., optoelectronics, photonics, micro- and nanofluidics, and nanomedicine. This work reviews the latest trends in the field, including the establishment of a comprehensive theoretical background and standardized practices. The reliability, repeatability, and reproducibility of the technique are also discussed, along with the use of multiparametric analysis and artificial-intelligence algorithms to enhance thermal readouts. In addition, examples are provided to underscore the challenges that luminescence thermometry faces, alongside the need for a continuous search and design of new materials, experimental techniques, and analysis procedures to improve the competitiveness, accessibility, and popularity of the technology.

Highly Stable and Photoluminescent CsPbBr3/Cs4PbBr6 Composites for White-Light-Emitting Diodes and Visible Light Communication

Inorganic lead halide perovskite is one of the most excellent fluorescent materials, and it plays an essential role in high-definition display and visible light communication (VLC). Its photochromic properties and stability determine the final performance of light-emitting devices. However, efficiently synthesizing perovskite with high quality and stability remains a significant challenge. Here, we develop a facile and environmentally friendly method for preparing high-stability and strong-emission CsPbBr₃/Cs₄PbBr₆ composites using ultrasonication and liquid paraffin. Tuning the contents of liquid paraffin, bright-emission CsPbBr₃/Cs₄PbBr₆ composite powders with a maximum PLQY of 74% were achieved. Thanks to the protection of the Cs₄PbBr₆ matrix and liquid paraffin, the photostability, thermostability, and polar solvent stability of CsPbBr₃/Cs₄PbBr₆-LP are significantly improved compared to CsPbBr₃ quantum dots and CsPbBr₃/Cs₄PbBr₆ composites that were prepared without liquid paraffin. Moreover, the fabricated CsPbBr₃/Cs₄PbBr₆-LP-based WLEDs show excellent luminescent performance with a power efficiency of 129.5 lm/W and a wide color gamut, with 121% of the NTSC and 94% of the Rec. 2020, demonstrating a promising candidate for displays. In addition, the CsPbBr₃/Cs₄PbBr₆-LP-based WLEDs were also demonstrated in a VLC system. The results suggested the great potential of these high-performance WLEDs as an excitation light source to achieve VLC.

Ultra-Thermostability of Spatially Confined and Fully Protected Perovskite Nanocrystals by In Situ Crystallization

Although all-inorganic perovskite materials present multiple fascinating optical properties, their poor stability undermines their potential application in the field of multi-color display. Herein, spatially confined CsPbBr₃ nanocrystals are in situ crystallized within uniform mesoporous SiO₂ nanospheres (MSNs) to regulate their size distribution, passivate their surface defects, shield them from water/oxygen, and more importantly, enhance their thermotolerance. As a result, the remnant PL intensity of the prepared spatially confined perovskite (CsPbBr₃ ) nanocrystals by in situ crystallization within uniform mesoporous SiO₂ nanospheres (SCP@MSNs) powders can be maintained over 98% of its initial value even after being immersed in harsh conditions (0.1 m HCl or 0.1 m NaOH) for 60 days. Furthermore, the prepared SCP@MSNs-PDMS film demonstrates astonishing thermostability by maintaining almost consistent room temperature PL intensities after continuous heating-cooling cycles between 200 and 25 °C, which would greatly improve its processability during potential industrial manufacturing. The fabricated LCD backlit based on SCP@MSNs covers 124% of NTSC standard and 95.6% of Rec. 2020 standard, indicating its great potential in practical display field.

In Situ Embedding Synthesis of CsPbBr3@Ce-MOF@SiO2 Nanocomposites for High Efficiency Light-Emitting Diodes: Suppressing Reabsorption Losses through the Waveguiding Effect

All-inorganic perovskite quantum dots (PQDs), which possess outstanding photophysical properties, are regarded as promising materials for optoelectronic applications. However, the poor light conversion efficiency and severe stability problem hinder their widespread applications. In this work, a novel encapsulation strategy is developed through the in situ growth of CsPbX₃ PQDs in presynthesized mesoporous cerium-based metal organic frameworks (Ce-MOFs) and further silane hydrolysis-encapsulation, generating stable CsPbX₃@Ce-MOF@SiO₂ composites with greatly enhanced light conversion efficiency. Moreover, the simulation results suggest that the pore boundary of Ce-MOFs has a strong waveguide effect on the incident PQD light, constraining PQD light inside the bodies of Ce-MOFs and suppressing reabsorption losses, thus increasing the overall light conversion efficiency of PQDs. Meanwhile, the Ce-MOF@SiO₂ protective shell effectively improves the stability by blocking internally embedded PQDs from the harmful external environment. Further, the obtained white-light-emitting diode shows an ultrahigh luminous efficiency of 87.8 lm/W, which demonstrates their great potential in optoelectronic applications.

Recent Advances in Synthesis, Properties, and Applications of Metal Halide Perovskite Nanocrystals/Polymer Nanocomposites

Metal halide perovskite nanocrystals (PNCs) have recently garnered tremendous research interest due to their unique optoelectronic properties and promising applications in photovoltaics and optoelectronics. Metal halide PNCs can be combined with polymers to create nanocomposites that carry an array of advantageous characteristics. The polymer matrix can bestow stability, stretchability, and solution-processability while the PNCs maintain their size-, shape- and composition-dependent optoelectronic properties. As such, these nanocomposites possess great promise for next-generation displays, lighting, sensing, biomedical technologies, and energy conversion. The recent advances in metal halide PNC/polymer nanocomposites are summarized here. First, a variety of synthetic strategies for crafting PNC/polymer nanocomposites are discussed. Second, their array of intriguing properties is examined. Third, the broad range of applications of PNC/polymer nanocomposites is highlighted, including light-emitting diodes (LEDs), lasers, and scintillators. Finally, an outlook on future research directions and challenges in this rapidly evolving field are presented.

Ultrasensitive Temperature Sensing Based on Ligand-Free Alloyed CsPbClx Br3-x Perovskite Nanocrystals Confined in Hollow Mesoporous Silica with High Density of Halide Vacancies

Temperature sensing based on fluorescent semiconductor nanocrystals has recently received immense attention. Enhancing the trap-facilitated thermal quenching of the fluorescence should be an effective approach to achieve high sensitivity for temperature sensing. Compared with conventional semiconductor nanocrystals, the defect-tolerant feature of lead halide perovskite nanocrystals (LHP NCs) endows them with high density of defects. Here, hollow mesoporous silica (h-SiO₂ ) template-assisted ligand-free synthesis and halogen manipulation (chloride-importing) are proposed to fabricate highly defective yet fluorescent CsPbCl_1.2 Br_1.8 NCs confined in h-SiO₂ (CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ ) for ultrasensitive temperature sensing. The trap barrier heights, exciton-phonon scattering, and trap state filling process in the CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ and CsPbBr₃ NCs@h-SiO₂ are studied to illustrate the higher temperature sensitivity of CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ at physiological temperature range. By integrating the thermal-sensitive CsPbCl_1.2 Br_1.8 NCs@h-SiO₂ and thermal-insensitive K₂ SiF₆ :Mn⁴⁺ phosphor into the flexible ethylene-vinyl acetate polymer matrix, ratiometric temperature sensing from 30.0 °C to 45.0 °C is demonstrated with a relative temperature sensitivity up to 13.44% °C^-1 at 37.0 °C. The composite film shows high potential as a thermometer for monitoring the body temperature. This work demonstrates the unparalleled temperature sensing performance of LHP NCs and provides new inspiration on switching the defects into advantages in sensing applications.

Thermal and photo stability of all inorganic lead halide perovskite nanocrystals

Inorganic lead halide perovskite (ILHP) nanocrystals (NCs) show great potential in solid state lighting and next generation display technology due to their excellent optical properties. However, almost all ILHP NCs are still facing the problem of unstable luminescence properties caused by heating and/or UV illumination. Further improving the thermal and photo stability of ILHP NCs has become the most urgent challenge for their practical application. This Perspective review specifically focuses on the thermal and photo stability of ILHP NCs, discusses and analyzes the factors that affect the thermal and photo stability of ILHP NCs from the perspective of surface ligands and structure composition, summarizes the current strategies to improve the thermal and photo stability of ILHP NCs, and presents the key challenges and perspectives on the research for the improvement of thermal and photo stability of ILHP NCs.

All-inorganic perovskite quantum dot light-emitting memories

Field-induced ionic motions in all-inorganic CsPbBr₃ perovskite quantum dots (QDs) strongly dictate not only their electro-optical characteristics but also the ultimate optoelectronic device performance. Here, we show that the functionality of a single Ag/CsPbBr₃/ITO device can be actively switched on a sub-millisecond scale from a resistive random-access memory (RRAM) to a light-emitting electrochemical cell (LEC), or vice versa, by simply modulating its bias polarity. We then realize for the first time a fast, all-perovskite light-emitting memory (LEM) operating at 5 kHz by pairing such two identical devices in series, in which one functions as an RRAM to electrically read the encoded data while the other simultaneously as an LEC for a parallel, non-contact optical reading. We further show that the digital status of the LEM can be perceived in real time from its emission color. Our work opens up a completely new horizon for more advanced all-inorganic perovskite optoelectronic technologies.

Electric field induced ion migration is a well-known phenomenon in perovskite, but the consequences are notorious, and thus needs to be prevented. Here, on the other hand, the authors cleverly manipulate this event for realising resistive random-access memory and light-emitting electrochemical cell in one device based on CsPbBr₃ quantum dots.

Solvent- and initiator-free fabrication of efficient and stable perovskite-polystyrene surface-patterned thin films for LED backlights

We report a one-pot route for the synthesis of CsPbBr₃ perovskite nanocrystals (PNCs) in styrene to form a glue-like polystyrene (PS) pre-polymer incorporating mono-dispersed PNCs. The pre-polymer enables solvent- and initiator-free fabricating and patterning PNC-PS light down-conversion films for liquid crystal display application. The mechanistic study reveals that the styrene molecules adsorbed on the PNC surface undergo self-initiated polymerization in the pre-polymerization process, forming stable surface capsulation over the PNCs. The PNC-PS pre-polymer and composite film display high photoluminescent quantum yield (PLQY) and resistance to air, light irradiation and water. The micropatterned PNC-PS film with a period of 1000 nm was fabricated through imprinting of the pre-polymer. The micropatterned thin film displays an enlarged viewing angle, improved light distribution and PLQY of >90%. The backlight employing the PNC-PS film displays bright green color and a wide color gamut of >120% NTSC. This solvent-free and one-pot strategy could find promising potential in the development of diverse luminescent nanocomposites to meet the requirements of micro/nano-manufacturing and high performance display application.

Improved Long-Term Reliability of a Silica-Encapsulated Perovskite Quantum-Dot Light-Emitting Device with an Optically Pumped Remote Film Package

In this study, inorganic perovskite (CsPbBr₃) quantum dots are wrapped in SiO₂ to provide better performance against external erosion. Long-term storage (250 days) is demonstrated with very little changes in the illumination capability of these quantum dots. While in the continuous aging procedure, different package architectures can achieve very different lifetimes. As long as 6000 h of lifetime can be expected from these quantum dots, but the blue shift of emission wavelength still needs more investigation.

Interface Chemical Modification between All-Inorganic Perovskite Nanocrystals and Porous Silica Microspheres for Composite Materials with Improved Emission

In recent years, there has been rapid progress in the development of photonic devices based on lead halide perovskite nanocrystals since they possess a set of unique optical and charge transport properties. However, the main limiting factor for their subsequent application is poor stability against exposure to adverse environmental conditions. In this work, a study of a composite material based on perovskite CsPbBr3 nanocrystals embedded in porous silica microspheres is presented. We developed two different approaches to change the interface between nanocrystals and the surface of the microsphere pores: surface treatment of (i) nanocrystals or (ii) microspheres. The surface modification with tetraethylorthosilicate molecules not only increased stability but also improved the optical responses of the composite material. The position of the emission band remained almost unchanged, but its lifetime increased significantly compared to the initial value. The improvement of the optical performance via surface modification with tetraethylorthosilicate molecules also works for the lead-free Bi-doped Cs2AgInCl6 double perovskite nanocrystals leading to increased stability of their optical responses at ambient conditions. These results clearly demonstrate the advantage of a composite material that can be used in novel photonic devices with improved performance.

B-Site Co-Alloying with Germanium Improves the Efficiency and Stability of All-Inorganic Tin-Based Perovskite Nanocrystal Solar Cells

Colloidal lead-free perovskite nanocrystals have recently received extensive attention because of their facile synthesis, the outstanding size-tunable optoelectronic properties, and less or no toxicity in their commercial applications. Tin (Sn) has so far led to the most efficient lead-free solar cells, yet showing highly unstable characteristics in ambient conditions. Here, we propose the synthesis of all-inorganic mixture Sn-Ge perovskite nanocrystals, demonstrating the role of Ge2+ in stabilizing Sn2+ cation while enhancing the optical and photophysical properties. The partial replacement of Sn atoms by Ge atoms in the nanostructures effectively fills the high density of Sn vacancies, reducing the surface traps and leading to a longer excitonic lifetime and increased photoluminescence quantum yield. The resultant Sn-Ge nanocrystals-based devices show the highest efficiency of 4.9 %, enhanced by nearly 60 % compared to that of pure Sn nanocrystals-based devices.

Composite Films of CsPbBr3 Perovskite Nanocrystals in a Hydrophobic Fluoropolymer for Temperature Imaging in Digital Microfluidics

A composite film material that combines CsPbBr₃ perovskite nanocrystals with a Hyflon AD 60 fluoropolymer was developed and utilized for high-resolution optical temperature imaging. It exhibited bright luminescence and, most importantly, long-term stability in an aqueous medium. CsPbBr₃ nanocrystal-Hyflon films immersed in aqueous solutions showed stable luminescence over at least 4 months and exhibited a fully reversible pronounced temperature sensitivity of 1.2% K^-1 between 20 and 80 °C. They were incorporated into a digital microfluidic (electrowetting on dielectric) platform and were used for spatially resolved temperature measurements during droplet movements. Thermal mapping with a CsPbBr₃ nanocrystal-Hyflon sensing layer in a room temperature environment (22.0 °C) revealed an increase in local temperatures of up to 40.2 °C upon voltage-driven droplet manipulations in a digital microfluidic system, corresponding to a local temperature change of up to 18.2 °C.

Lead-Free Perovskites for Lighting and Lasing Applications: A Minireview

Research on materials with perovskite crystal symmetry for photonics applications represent a rapidly growing area of the photonics development due to their unique optical and electrical properties. Among them are high charge carrier mobility, high photoluminescence quantum yield, and high extinction coefficients, which can be tuned through all visible range by a controllable change in chemical composition. To date, most of such materials contain lead atoms, which is one of the obstacles for their large-scale implementation. This disadvantage can be overcome via the substitution of lead with less toxic chemical elements, such as Sn, Bi, Yb, etc., and their mixtures. Herein, we summarized the scientific works from 2016 related to the lead-free perovskite materials with stress on the lasing and lighting applications. The synthetic approaches, chemical composition, and morphology of materials, together with the optimal device configurations depending on the material parameters are summarized with a focus on future challenges.

Fe2+ doped in CsPbCl3 perovskite nanocrystals: impact on the luminescence and magnetic properties

All inorganic halide perovskite nanocrystals (NCs) have wider practical applications owing to their good properties, whereas the photoluminescence quantum yield (PLQY) of the purple emissive CsPbCl₃ NCs is too low to apply in multi-color displays. In this study, earth-abundant Fe²⁺ metal ions were successfully incorporated into the lattice of CsPbCl₃ NCs with the partial replacement of the sites of Pb²⁺ ions. The impacts of Fe²⁺ ions on the luminescence and magnetic properties of CsPbCl₃ NCs were studied using photoluminescence spectroscopy (PL), X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), and a vibrating sample magnetometer (VSM). CsPb_1−xFe_xCl₃ NCs, with x = 0, 0.1, 0.2, and 0.3, were synthesized at 170 °C. It was found that an appropriate amount of Fe²⁺ doping not only improved the homogeneity of the size of NCs, but also enhanced the PLQY and average PL lifetimes. An obvious hysteresis behavior was observed for the NCs, and there was a significant change in the saturation magnetization value with the increase in the Fe²⁺ concentration.

The CsPb_1−xFe_xCl₃ NCs were synthesized and an appropriate amount of Fe²⁺ doping can enhance PLQY and average PL lifetimes. Meanwhile, an obvious hysteresis behavior has been observed for the NCs.