Diphenylphosphine-Substituted Ferrocene/Silsesquioxane-Based Hybrid Porous Polymers as Highly Efficient Adsorbents for Water Treatment

Phenyl-Extended Resorcin[4]arenes: Synthesis and Highly Efficient Iodine Adsorption

The continuous exploration of new analogs of calixarenes and pillararenes unlocks infinite opportunities in supramolecular chemistry and materials. In this work, we introduce a new class of macrocycle, phenyl-extended resorcin[4]arenes (ExR4), a unique and innovative design that incorporates unsubstituted phenylene moieties into the resorcin[4]arene scaffold. Single-crystal analysis reveals a chair-like conformation for per-methylated ExR4 (Me-ExR4) and a twisted "Figure-of-eight" shaped conformation for per-hydroxylated ExR4 (OH-ExR4). Notably, OH-ExR4 demonstrates exceptional adsorption capability toward I3 - ions in an aqueous solution, with a rapid kinetic rate of 1.18×10-2 g ⋅ mg-1 ⋅ min-1. Furthermore, OH-ExR4 shows excellent recyclability and potential as a stationary phase in column setups. The discovery of ExR4 opens up new avenues for constructing new macrocycles and inspires further research in functional adsorption materials for water pollutant removal.

Ultrasound-Assisted Advanced Oxidation Process Using Perovskite-Type LaMnO3 Nanospheres

Among the perovskite oxide community, La-based perovskites have garnered considerable interest due to their remarkable properties including catalytic, electrocatalytic, photocatalytic, sensing, electrical, magnetic, and optical characteristics. Herein, rhodamine-B (RB) dye has been reported to be sono-catalytically decomposed by an ultrasound-assisted advanced oxidation process (AOP) using perovskite-type LaMnO3 (LMO) nanospheres synthesized via ultrasonic approach. Several physiochemical characterizations such as XRD, FT-IR, XPS, SEM, TEM, and SEM-EDS investigations were used to investigate the LMO perovskite nanospheres. Then, LMO potential for adsorption and the sonocatalytic decolorization of RB dye in an aqueous solution are examined. With LMO perovskites, the adsorption and removal kinetics of RB correspond to the pseudo-first-order model. Furthermore, by utilizing the pseudo-first-order, the RB dye process is removed with improved efficacy in the following sequence: Agitation alone: 3.76×10-4 min-1 Collapse

Key Words

• Adsorption
• Degradation
• Pseudo-first-order kinetics
• Rhodamine-B dye
• Scavenger
• Ultrasonication

Collapse

MESH Headings Collapse

Grants

• SPARC/2018-2019/P236/SL SPARC

Collapse

Affiliation(s)

Madappa C Maridevaru Nanomaterials & Solar Energy Conversion Lab, Department of Chemistry, National Institute of Technology, Tiruchirappalli, 620015, India Department of Chemistry, College of Science, Sultan Qaboos University, P.O. Box- 36, P.C. 9 123, Al-Khoudh, Muscat, Oman
Reshma Kaimal Nanomaterials & Solar Energy Conversion Lab, Department of Chemistry, National Institute of Technology, Tiruchirappalli, 620015, India
Rengaraj Selvaraj Department of Chemistry, College of Science, Sultan Qaboos University, P.O. Box- 36, P.C. 9 123, Al-Khoudh, Muscat, Oman
Abdullah Al Souwaileh Department of Chemistry, College of Science, King Saud University, Riyadh, 11451, Saudi Arabia
Ming Xuan Sun School of Materials Engineering, Shanghai University of Engineering Science, Shanghai, 201620, China
Sambandam Anandan Nanomaterials & Solar Energy Conversion Lab, Department of Chemistry, National Institute of Technology, Tiruchirappalli, 620015, India
Muthupandian Ashokkumar School of Chemistry, University of Melbourne, Melbourne, Vic, 3010, Australia

Collapse

Fabrication of crown ether-containing copolymer porous membrane and their enhanced adsorption performance for cationic dyes: Experimental and DFT investigations

Adsorptive separation membranes are widely utilized for the removal of toxic dyeing pollutants from dyeing wastewater. However, developing novel adsorption membranes with large adsorption capacities and enhanced adsorption performance for dyes in actual wastewater poses a significant challenge. This study focuses on the fabrication of crown ether-containing copolymer porous membrane (CRPM) and investigation of the adsorption performance of dyes from aqueous solutions. The morphology structure and pore size distribution revealed that the membrane was endowed with rich micropores and hierarchical porous structures. Three typical cationic dyes (MB, RhB, CV) and an anionic dye (MO) were selected to evaluate the adsorption behavior. The results of adsorption isotherms and kinetics demonstrated that the adsorption data could be well-fitted using the Freundlich and pseudo-first-order kinetic models, the thermodynamic parameters revealed that the adsorption process of dyes on CRPM is a spontaneous endothermic reaction. The membrane exhibited excellent adsorption performance for cationic dyes, with RhB displaying a higher maximum adsorption capacity than previously reported porous membranes. Notably, dynamic adsorption-desorption filtration demonstrated a rapid removal efficiency, with RhB, MB, and CV achieving removal rates of 99.09%, 98.63%, and 99.14% respectively, after five cycles. The filtration volume of the CRPM membrane was 2.4-fold greater than that of a traditional PVDF membrane when applied to actual dyeing wastewater. DFT theoretical calculations were employed to elucidate the adsorption mechanism. These calculations confirmed the significant roles of electrostatic interactions, H-bonds and π-π interactions in facilitating the high-efficiency adsorption of cationic dyes. These findings highlight the potential of the crown ether-containing copolymer as a promising material for adsorption separation membranes in the treatment of dyeing wastewater.

A smart thermoresponsive macroporous 4D structure by 4D printing of Pickering-high internal phase emulsions stabilized by plasma-functionalized starch nanomaterials for a possible delivery system

Hierarchically porous structures combine microporosity, mesoporosity, and microporosity to enhance pore accessibility and transport, which are crucial to develop high performance materials for biofabrication, food, and pharmaceutical applications. This work aimed to develop a 4D-printed smart hierarchical macroporous structure through 3D printing of Pickering-type high internal phase emulsions (Pickering-HIPEs). The key was the utilization of surface-active (hydroxybutylated) starch nanomaterials, including starch nanocrystals (SNCs) (from waxy maize starch through acid hydrolysis) or starch nanoparticles (SNPs) (obtained through an ultrasound treatment). An innovative procedure to fabricate the functionalized starch nanomaterials was accomplished by grafting 1,2-butene oxide using a cold plasma technique to enhance their surface hydrophobicity, improving their aggregation, and thus attaining a colloidally stabilized Pickering-HIPEs with a low concentration of each surface-active starch nanomaterial. A flocculation of droplets in Pickering-HIPEs was developed after the addition of modified SNCs or SNPs, leading to the formation of a gel-like structure. The 3D printing of these Pickering-HIPEs developed a highly interconnected large pore structure, possessing a self-assembly property with thermoresponsive behavior. As a potential drug delivery system, this thermoresponsive macroporous 3D structure offered a lower critical solution temperature (LCST)-type phase transition at body temperature, which can be used in the field of smart releasing of bioactive compounds.

Azo-Linked Porous Polycalix[n]arenes for the Efficient Removal of Organic Micropollutants from Water

Developing novel porous adsorbents for efficient wastewater treatment is significant to the environment protection. Herein, three porous polycalix[n]arenes (n = 4, 6, and 8) which had varying cavity sizes of the macrocycle (Azo-CX4P, Azo-CX6P, and Azo-CX8P) were prepared under mild conditions and tested for their potential application in water purification. Azo-CX8P with a larger cavity size of the macrocycle outperformed Azo-CX4P and Azo-CX6P in screening studies involving a range of organic micropollutants. It was proved that Azo-CX8P was especially efficient in the removal of cationic dyes because of its high negative surface charge. In terms of the adsorption of Rhodamine B with Azo-CX8P, the pseudo-second-order rate constant reaches 5.025 g·mg-1·min-1 with the maximum adsorption capacity being 1345 mg·g-1. These values are significantly higher compared with those recorded for most adsorbents. In addition, the easily prepared Azo-CX8P can be reused at least six times without a loss of the adsorption efficiency, demonstrating its potential use in water purification.

Metallodendrimers Unveiled: Investigating the Formation and Features of Double-Decker Silsesquioxane-Based Silylferrocene Dendrimers

Dendrimers exhibiting reversible redox properties have attracted extensive attention for their potential as electron transfer mediators, catalysts, and molecular sensors. In this study, we introduce intriguing G1 and G2 dendrimers featuring double-decker silsesquioxane cores and silylferrocene moieties. Through a carefully orchestrated sequence of condensation, reduction, and hydrosilylation reactions, these compounds were synthesized and comprehensively characterized spectroscopically and spectrometrically. Our investigation also encompassed the examination of their properties, including thermal stability, solubility in common organic solvents, and electrochemical behavior. We determined that these dendrimers possess the capability to form monolayers on platinum electrodes, which we conclusively demonstrated through the probing of cyclic voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy imaging. Notably, this study marks the first-ever example of modifying double-decker silsesquioxane cores with ferrocene groups while simultaneously representing one of the scarce instances of dendrimers exhibiting an open double-decker silsesquioxane core.

Contemporary Developments in Ferrocene Chemistry: Physical, Chemical, Biological and Industrial Aspects

Ferrocenyl-based compounds have many applications in diverse scientific disciplines, including in polymer chemistry as redox dynamic polymers and dendrimers, in materials science as bioreceptors, and in pharmacology, biochemistry, electrochemistry, and nonlinear optics. Considering the horizon of ferrocene chemistry, we attempted to condense the neoteric advancements in the synthesis and applications of ferrocene derivatives reported in the literature from 2016 to date. This paper presents data on the progression of the synthesis of diverse classes of organic compounds having ferrocene scaffolds and recent developments in applications of ferrocene-based organometallic compounds, with a special focus on their biological, medicinal, bio-sensing, chemosensing, asymmetric catalysis, material, and industrial applications.

Fe-N-Doped Conjugated Organic Polymer Efficiently Enhanced the Removal Rate of Cr(VI) from Water

A Fe-N conjugated organic polymer (SMP-Fr-Py) was prepared from ferrocene and pyrrole using a Scholl coupling reaction, which significantly improved the performance of Cr(VI) removal compared to the polymer (HCP-Fr-Py) prepared by adding the cross-linker formaldehyde dimethyl acetal (FDA). The results showed that at a pH of 2 and at 25 °C, the removal of Cr(VI) reached 90% for SMP-Fr-Py and only 58% for HCP-Fr-Py after 20 min of reaction. Subsequently, 99% and 78% were achieved after 120 min of reaction, respectively. The test results showed that the removal reaction followed a pseudo-second-order kinetic model. The removal efficiency decreased with increasing solution pH and initial Cr(VI) concentration, but increased with increasing SMP-Fr-Py dosage, reaching three cycles. The characterization of the reaction complexes and measurements of Cr species conversion revealed the near absence of Cr(VI) species in the solution. Approximately 38% of Cr(VI) was found to be adsorbed on the material surface, with another fraction present in solution (24%) and on the material surface (38%) in the form of Cr(III). The overall study showed that the direct connection of ferrocene and pyrrole in SMP-Fr-Py through C-C bonding increased the conjugated structure of the polymer backbone, which facilitated electron transfer and transport. Furthermore, the Fe-N elements worked synergistically with each other more easily, which improved the removal performance of Cr(VI) and provided a reference for the subsequent work.

Conjugated Microporous Polymers Based on Ferrocene Units as Highly Efficient Electrodes for Energy Storage

This work describes the facile designing of three conjugated microporous polymers incorporated based on the ferrocene (FC) unit with 1,4-bis(4,6-diamino-s-triazin-2-yl)benzene (PDAT), tris(4-aminophenyl)amine (TPA-NH₂), and tetrakis(4-aminophenyl)ethane (TPE-NH₂) to form PDAT-FC, TPA-FC, and TPE-FC CMPs from Schiff base reaction of 1,1'-diacetylferrocene monomer with these three aryl amines, respectively, for efficient supercapacitor electrodes. PDAT-FC and TPA-FC CMPs samples featured higher surface area values of approximately 502 and 701 m² g^-1, in addition to their possession of both micropores and mesopores. In particular, the TPA-FC CMP electrode achieved more extended discharge time compared with the other two FC CMPs, demonstrating good capacitive performance with a specific capacitance of 129 F g^-1 and capacitance retention value of 96% next 5000 cycles. This feature of TPA-FC CMP is attributed to the presence of redox-active triphenylamine and ferrocene units in its backbone, in addition to a high surface area and good porosity that facilitates the redox process and provides rapid kinetics.

S,N-rich luminous covalent organic frameworks for Hg2+ detection and removal

The challenge for simultaneous detection and removal of Hg²⁺ is the design of bifunctional materials bearing abundant accessible chelating sites with high affinity. Covalent-organic frameworks (COFs) are attracting more and more attention as potential bifunctional materials for Hg²⁺ detection due to their large specific surface area, ordered pores, and abundant chelating sites. Here, a new luminous S,N-rich COF_BTT-AMPD based on hydrophilic block unit of 2,2'-azobis(2-methylpropionamidine) dihydrochloride (AMPD) was constructed, which improved the solubility and affinity for Hg²⁺ greatly. Another S-rich fused-ring unit of benzotrithiophene tricarbalaldehyde (BTT) enhanced the conjugation of COF_BTT-AMPD, and the methyl-rich chains block unit of AMPD effectively suppressed the aggregation-caused quenching. Thus, the COF_BTT-AMPD emitted strong fluorescence at 546 nm in liquid and solid as well as different solvent with a wide pH range, which was used for the visual detection and removal of Hg²⁺ (detection limit: 2.6 nM, linear range: 8.6 × 10^-3-20 μM, monolayer adsorption capacity: 476.19 mg g^-1) successfully. COF_BTT-AMPD-based fabric and light-emitting diode coatings were further constructed to realize the visual detection of Hg²⁺ vapor. The results reveal the potential of S,N-rich luminous COF_BTT-AMPD for Hg²⁺ detection and remediation in the environment.

Selective adsorption of anionic dye from wastewater using polyethyleneimine based macroporous sponge: Batch and continuous studies

Dyes are well known for their hazardous impacts on public health and the environment. Dye removal using monolithic adsorbents is an attractive approach for industrial applications and process design owing to their utilization in both static and dynamic adsorption experiments. In the present work, polyethyleneimine (PEI) based macroporous monolithic sponge (S₁₀₀) was engineered by ice-templating method and used as an adsorbent. Both batch and continuous operations for dye removal were studied. The effect of various parameters such as pH, adsorbent amount, flow rate, influent dye concentration, and adsorbent bed height on adsorption performance of S₁₀₀ was studied and modelled using Langmuir/Freundlich isotherms for static operations and Adam-Bohart/Thomas model in packed-bed column experiments. Under optimum conditions, the adsorbent showed a remarkably higher adsorption capacity towards CR (1666.67 mg/g), which is considerably higher than most PEI-based adsorbents. Amine groups in S₁₀₀ offered exceptional selectivity for anionic Congo red (CR) against cationic Methylene blue (MB) dye (separation factor of 208 and 87 in absence and presence of sodium chloride, respectively). It can be easily regenerated in alkaline medium without a significant loss in percent adsorption capacity and shows good thermal and mechanical stability. Notably, in column studies, a relatively smaller percentage of unused bed height (32.3%) was observed with higher dye uptake for 16 mg S₁₀₀ at flow rate 10 mL/h and inlet concentration 300 mg/L. Thus, the adsorbent displays an outstanding physiochemical characteristic, excellent selectivity for anionic dye, ease of regeneration and high adsorption performance in both batch and continuous studies.

Highly Efficient and Selective Gold Recovery Based on Hypercross-Linking and Polyamine-Functionalized Porous Organic Polymers

With the continuous increase of electronic products, there is an urgent need to effectively recover gold from e-waste and other secondary resources other than the original mine. Here, hypercross-linking and polyamine-functionalized porous organic polymers (Pc-POSS-POP) were designed and facially synthesized based on multiple azo-coupling polymerizations between 2,9,16,23-tetraaminophthalocyanine (H₂Pc(NH₂)₄) and octa(aminophenyl)-t8-silsesquioxane (OAPS) for the first time. The reaction requires no metal as a catalyst, thereby benefiting the purification of the product and the industrial scalability. Pc-POSS-POPs possess a hypercross-linking structure, highly conjugated frameworks, nitrogen-rich active sites, and extensively visible and near-infrared light absorption, which was utilized as an absorbent to retrieve Au (III). The results demonstrated that Pc-POSS-POPs have a high adsorption capacity (862.07 mg g^-1) and a rapid adsorption rate toward gold recycling. The maximum adsorption capacity could reach up to 1026.87 mg g^-1 as in the case of light irradiation. Due to the strong N coordination sites and the electronic interaction between the -NH₄⁺ groups of Pc-POSS-POPs and AuCl₄^-, Pc-POSS-POPs also exhibited excellent selectivity toward gold over several coordinated metals [Cr (VI), Co (II), Cd (II), Ni (II), and Hg (II)]. These properties together with the good regenerative ability and superior recyclability demonstrated that Pc-POSS-POPs possess promising potential as hypercross-linking polymers for capturing and recycling of Au (III).

Three porous shapeable three-component hydrogen-bonded covalent-organic aerogels as backfill materials in a simulated permeable reactive barrier (PRB) for trapping levofloxacin

Levofloxacin (LEV) infiltrated in groundwater has threatened the safety of drinking water. For in-situ remediation of LEV-contaminated groundwater, there exists a main challenge of exploiting proper high efficient backfill medium in utilizing charming permeable reactive barriers (PRBs). Herein, three porous shapeable three-component hydrogen-bonded covalent organic aerogels (H_COA-1, H_COA-2 and H_COA-3) were fabricated based on a multiple-linking-site strategy to evaluate for adsorptive removal of LEV. The three H_COAs exhibited satisfactory performance in LEV adsorption that could integrate high adsorption capacity, good antiion interference, excellent recyclability and wide pH tolerance. The different regularity of kinetics and isotherms of three H_COAs signified that electrostatic effect, pore preservation, hydrogen bonding probably govern the adsorption process in combination, coupling with π-π electron-donor-acceptor (EDA), dipole-dipole and hydrophobic-hydrophobic interaction besides. In addition, the response surface methodology (RSM) was employed for studying the single and synergetic effects of selected variables and optimizing operation conditions. Furthermore, a laboratory PRB column packed with processable H_COA-2 was set up to investigate the LEV removal, and the breakthrough data was explained by Adams-Bohart, Thomas, BDST and Yoon-Nelson models. We believe could hopefully bring H_COAs into the real in-situ remediation of such challenging and persistent LEV-polluted groundwater with further massive-scale efficiently.

Beads on a Chain Fluorescent Oligomeric Materials: Interactions of Conjugated Organic Cross-Linkers with Silsesquioxane Cages

Organic electronic materials have advantages over inorganics in terms of versatility, cost, and processability. Recent advancements in organic materials for light-emitting diodes (OLED), field effect transistors (OFET), and photovoltaics have engendered extensive innovation potential on this field. In this research, we focus on synthesizing SQ (silsesquioxane) based oligomers cross-linked by dibromo-aromatic linkers and explore how the cross-linker influences their photophysical properties. Bis-trialkoxy silyl (linker) model compounds were synthesized to compare noncage photophysical properties with the oligomers. Several techniques such as UV/vis, fluorescence, FTIR, and thermal gravimetric analysis (TGA) have been used to characterize the systems. Time-resolved fluorescence and femtosecond transient absorption spectroscopy were used to understand the excited state dynamics of these materials. Studies were carried out to understand the differences between monomers and oligomers and potential energy transfer and charge transfer between the cages and cross-linking chromophores. Transient absorption showed lower energy absorption from the excited states, suggesting short-range communication between moieties. Single photon counting studies have shown distinct lifetime differences between most linkers and cages display possible excitation energy transfer through these materials. Transient absorption anisotropy measurements have shown signatures for excitation energy transfer between linker chromophores for oligomeric compounds. The silsesquioxane (SQ) backbone of the oligomers gives substantial thermal stability as well as solution processability, giving better flexibility for achieving energy transfer between linking chromophores.

Adsorption of Anionic Dyes Using a Poly(styrene-block-4-vinylpyridine) Block Copolymer Organogel

An organogel was prepared by chemically cross-linking a poly(styrene-block-4-vinylpyridine) diblock copolymer using dibromododecane in dimethylformamide. Analysis of the prominent structure peak in small-angle X-ray scattering along with the results of light scattering and rheological profile suggests the bridging of the spherical micelles to one another to form an interconnected network after gelation. The use of this organogel as a selective adsorbent for removing anionic dyes from individual aqueous dye solutions and in a mixture of cationic and anionic dye solutions has shown more than 90% removal of the anionic dyes within 2 h. The regeneration and reusability studies showed that even after 20 cycles, the adsorption property of the organogel holds extremely well still beyond 90%. These results are indicative of the potential use of poly(styrene-block-4-vinylpyridine) organogel for the anionic ions removal in wastewater treatment.

Functional Porous Organic Polymers with Conjugated Triaryl Triazine as the Core for Superfast Adsorption Removal of Organic Dyes

Developing efficient adsorbents for the removal of water pollutants is of great significance for environmental protection. In this study, conjugated triaryl triazines (CTT), containing intramolecular hydrogen-bonding patterns, were recognized to be intriguing building blocks for the construction of porous organic polymer (POP) adsorbents. These planar monomers with multiple phenolic hydroxyl groups facilitated the formation of aza-linked polymers with hierarchical porous structures, sheet-like morphology, good surface wettability, and high degree of functionality. Such structural characteristics of the CTT-POP adsorbents provided superfast adsorption of various cationic dyes from water. For the adsorption of methylene blue dye, the pseudo-second-order rate constant of CTT-POP-1 is 12.9 g mg^-1 min^-1, superior to those reported in the existing literature. In addition, CTT-POP-1 can be regenerated at least seven times with no loss in performance, indicating its potential application in water treatment.

A metal-free approach to bipyridinium salt-based conjugated porous polymers with olefin linkages

A metal-free bipyridinium salt-activated Knoevenagel condensation strategy was developed to synthesize olefin-linked conjugated porous polymers with π-extended networks, positively charged skeletons, high stability and antibacterial activity.

Synergistic Effects of Carbon Dots and Palladium Nanoparticles Enhance the Sonocatalytic Performance for Rhodamine B Degradation in the Absence of Light

Carbon dot (CD) and palladium nanoparticle (Pd NP) composites are semiconducting materials having tremendous applications in catalysis with suitable band gaps. However, their combination with a suitable polymer matrix in sonophotocatalysis has not been explored. Herein, we have synthesized and characterized a new nanohybrid catalyst from a polyamide cross-linked CD-polymer and subsequent deposition of Pd NPs. A sonocatalytic activity of 99% rhodamine B dye degradation was achieved in mere 5 min in the dark. A model catalyst replacing CDs with benzene and other control studies revealed that the synergistic effects of CDs and Pd NPs enhance the sonocatalytic activity of the nanohybrid catalyst. Interestingly, visible light did not influence the activity significantly. Mechanistic investigations suggest that generation of reactive oxygen species on the surface of the CD-polymer initiated by ultrasound, which is further facilitated by Pd NPs, is the key for remarkable catalytic activity (a rate constant of 0.99 min-1). Recyclable heterogeneous catalysts under ambient conditions are promising for exploring sono-assisted dark catalysis for several avenues.

Cage-like silsesquioxanes-based hybrid materials

Cage-like silsesquioxanes are considered to be ideal and versatile building blocks of hybrid materials due to their unique structures and excellent performance. This Perspective highlights recent advances in the field of cage-like silsesquioxane-based hybrid materials, ranging from monomer functionalization and materials preparation to application. The existing issues are reviewed and the challenges and prospects in this field are also discussed for further development and exploitation.

Antioxidant shape amphiphiles for accelerated wound healing

We reported a series of POSS-based antioxidant shape amphiphiles for preventing cell oxidative damage and promoting wound healing.