Stable, Flexible, and High-Performance SERS Chip Enabled by a Ternary Film-Packaged Plasmonic Nanoparticle Array

Plasmonic Nanostructures Grown from Reacting Droplet-In-Microwell Array on Flexible Films for Quantitative Surface-Enhanced Raman Spectroscopy in Plant Wearable In Situ Detection

Plant wearable detection has garnered significant interest in advancing agricultural intelligence and promoting sustainable food production amidst the challenges of climate change. Accurately monitoring plant health and agrochemical residue levels necessitates qualities such as precision, affordability, simplicity, and noninvasiveness. Here, a novel attachable plasmonic film is introduced and designed for on-site detection of agrochemical residues utilizing surface-enhanced Raman spectroscopy (SERS). By functionalizing a thin polydimethylsiloxane film with silver nanoparticles via controlled droplet reactions in micro-well arrays, a plasmonic film is achieved that not only maintains optical transparency for precise analyte localization but also conforms closely to the plant surface, facilitating highly sensitive SERS measurements. The reliability of this film enables accurate identification and quantification of individual compounds and their mixtures, boasting an ultra-low detection limit ranging from 10-16 to 10-13 m, with mini mal relative standard deviation. To showcase its potential, on-field detection of pesticide residues on fruit surfaces is conducted using a handheld Raman spectrometer. This advancement in fabricating plasmonic nanostructures on flexible films holds promise for expanding SERS applications beyond plant monitoring, including personalized health monitoring, point-of-care diagnosis, wearable devices for human-machine interface, and on-site monitoring of environmental pollutants.

Photocatalytic Deposition of Au Nanoparticles on Ti3C2Tx MXene Substrates for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) is a promising technique for sensitive detection. The design and optimization of plasma-enhanced structures for SERS applications is an interesting challenge. In this study, we found that the SERS activity of MXene (Ti3C2Tx) can be improved by adding Au nanoparticles (NPs) in a simple photoreduction process. Fluoride-salt-etched MXene was deposited by drop-casting on a glass slide, and Au NPs were formed by the photocatalytic growth of gold(III) chloride trihydrate solutions under ultraviolet (UV) irradiation. The Au-MXene substrate formed by Au NPs anchored on the Ti3C2Tx sheet produced significant SERS through the synergistic effect of chemical and electromagnetic mechanisms. The structure and size of the Au-decorated MXene depended on the reaction time. When the MXene films were irradiated with a large number of UV photons, the size of the Au NPs increased. Hot spots were formed in the nanoscale gaps between the Au NPs, and the abundant surface functional groups of the MXene effectively adsorbed and interacted with the probe molecules. Simultaneously, as a SERS substrate, the proposed Au-MXene composite exhibited a wider linear range of 10-4-10-9 mol/L for detecting carbendazim. In addition, the enhancement factor of the optimized SERS substrate Au-MXene was 1.39 × 106, and its relative standard deviation was less than 13%. This study provides a new concept for extending experimental strategies to further improve the performance of SERS.

Design of a novel SERS substrate by electrospinning for the detection of thiabendazole in soy-based foods

This study aimed to detect and quantify thiabendazole in soy products by surface-enhanced Raman spectroscopy (SERS) coupled with electrospun substrates. Enhanced Raman signals were acquired from uniform electrospun substrates, which were analyzed by focusing on the CN stretching modes at 1592 cm-1 for soy sauce and 1580 cm-1 for soy milk. The results revealed a linear relationship between the signal intensity and analyte concentrations with high R2 values (99.42 % for soy sauce and 99.75 % for soy milk). The limits of quantification (LOQ) were determined to be 69.9 ppb for soy milk and 240.59 ppb for soy sauce samples. The limits of detection (LOD) were found to be 23.1 ppb for soy milk and 79.4 ppb for soy sauce. These findings highlight the effectiveness of the electrospinning-SERS approach for detecting thiabendazole in soy-based food samples, contributing to the understanding of pesticide contamination and ensuring the quality and safety of food products.

Surface-enhanced Raman spectroscopy for studying the interaction of organometallic compound bis(1,3-dihexylimidazole-2-yl) silver(i) hexafluorophosphate (v) with the biofilm of Escherichia coli

Escherichia coli biofilms are a major cause of gastrointestinal tract diseases, such as esophageal, stomach and intestinal diseases. Nowadays, these are the most commonly occurring diseases caused by consuming contaminated food. In this study, we evaluated the efficacy of probiotics in controlling multidrug-resistant E. coli and reducing its ability to form biofilms. Our results substantiate the effective use of probiotics as antimicrobial alternatives and to eradicate biofilms formed by multidrug-resistant E. coli. In this research, surface enhanced Raman spectroscopy (SERS) was utilized to identify and evaluate Escherichia coli biofilms and their response to the varying concentrations of the organometallic compound bis(1,3-dihexylimidazole-2-yl) silver(i) hexafluorophosphate (v). Given the escalating challenge of antibiotic resistance in bacteria that form biofilms, understanding the impact of potential antibiotic agents is crucial for the healthcare sector. The combination of SERS with principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) enabled the detection and characterization of the biofilm, providing insights into the biochemical changes induced by the antibiotic candidate. The identified SERS spectral features served as indicators for elucidating the mode of action of the potential drug on the biofilm. Through PCA and PLS-DA, metabolic variations allowing the differentiation and classification of unexposed biofilms and biofilms exposed to different concentrations of the synthesized antibiotic were successfully identified, with 95% specificity, 96% sensitivity, and a 0.75 area under the curve (AUC). This research underscores the efficiency of surface enhanced Raman spectroscopy in differentiating the impact of potential antibiotic agents on E. coli biofilms.

Hydrogel SERS chip with strong localized surface plasmon resonance for sensitive and rapid detection of T-2 toxin

T-2 toxin is one of the naturally dangerous food contaminants, which is harmful to people and animals. Because of its strong toxicity and wide distribution, it is vital to develop a rapid and effective method for the detection of T-2 toxin. Herein, an excellent hydrogel surface-enhanced Raman scattering (SERS) chip is constructed for developing a novel SERS sensor to detect T-2 toxin using a portable Raman spectrometer. The SERS chip is prepared by in-situ Ca2+-mediated assembly of silver nanoparticles (AgNPs) in PVA solution, followed by a physical crosslinking possess. The assembled AgNPs produces a strong localized surface plasmon resonance (LSPR) at around 532 nm, which enables the high activity of SERS chip under the irradiation of 532 nm laser. Additionally, the unique structure of hydrogel makes the obtained chip show excellent reliability and anti-interference ability in detection. As a result, the developed SERS sensor shows many obvious advantageous including free of complex sample pretreatment (only a simple extraction), fast response (5 min), low limit of detection (0.41 ppb), wide detection range (1-10000 ppb), good recoveries (90.26-101.81 %) and relative standard deviations (2.8-6.7 %). Therefore, this SERS sensor provides a promising choice for rapid scanning and sensitive detection of trace T-2 toxin in complex matrices.

Recent Advances in Metallic Nanostructures-assisted Biosensors for Medical Diagnosis and Therapy

The field of nanotechnology has witnessed remarkable progress in recent years, particularly in its application to medical diagnosis and therapy. Metallic nanostructures-assisted biosensors have emerged as a powerful and versatile platform, offering unprecedented opportunities for sensitive, specific, and minimally invasive diagnostic techniques, as well as innovative therapeutic interventions. These biosensors exploit the molecular interactions occurring between biomolecules, such as antibodies, enzymes, aptamers, or nucleic acids, and metallic surfaces to induce observable alterations in multiple physical attributes, encompassing electrical, optical, colorimetric, and electrochemical signals. These interactions yield measurable data concerning the existence and concentration of particular biomolecules. The inherent characteristics of metal nanostructures, such as conductivity, plasmon resonance, and catalytic activity, serve to amplify both sensitivity and specificity in these biosensors. This review provides an in-depth exploration of the latest advancements in metallic nanostructures-assisted biosensors, highlighting their transformative impact on medical science and envisioning their potential in shaping the future of personalized healthcare.

Chitosan supported silver nanostructures as surface-enhanced Raman scattering sensor: Spectroscopic and density functional theory insights

In this work, nanostructures comprising silver nanoparticles supported on a wrinkled chitosan matrix (Ag@Ch) were successfully synthesized by a simple aging process at room temperature for four days through self-assembly. Chitosan, a natural polysaccharide was used as a support as well as a reducing agent for the formation of Ag nanostructures and the creation of hotspots for SERS activity. The fabricated Ag@Ch nanostructures were characterized by several spectroscopic techniques and were used as a surface-enhanced Raman scattering (SERS) substrate. The effect of wet, dry, and liquid samples on the SERS enhancement has been studied and was found to be effective for sensing Methylene blue, Crystal Violet, and p-Nitrophenol with detection limits of 3.8, 8.1, and 8.2 ppb respectively. The SERS enhancement of the Ag@Ch was attributed to the combination of both electromagnetic (EM) and chemical effects (CE). Density functional theory (DFT) calculations were used to explain the observed surface enhancement. Good agreement was observed between the experimental and simulated spectra.

Ag microlabyrinth/nanoparticles coated large-area thin PDMS films as flexible and transparent SERS substrates for in situ detection

Flexible and transparent surface-enhanced Raman scattering (SERS) substrates haveattractedmuchattention as a fast, sensitive and in situ detection platform for practical applications. However, the large-area fabrication of flexible and transparent SERS substrates with high performance is still challenging. Here, a flexible and transparent SERS substrate based on large-area thin PDMS film decorated with Ag microlabyrinth/nanoparticles hierarchical structures (denoted as ALNHS@PDMS) is fabricated by using the floating-on-water method and magnetron sputtering technology. By optimizing the sputtering time, the ALNHS with multiple hot spots are uniformly distributed on the PDMS surface. Based on characterizing the rhodamine 6G (R6G) with a portable Raman spectrometer, the optimal ALNHS@PDMS film exhibits a high enhancement factor (5.2 × 106), excellent uniformity and reproducibility, as well as superior mechanical stability. In addition, thanks to the good sticky feature and bi-directional activation property of the thin ALNHS@PDMS film, the prepared flexible and transparent SERS substrate can achieve in situ detection of malachite green residues (10-6 M) on apple and tomato skins. This large-area, thin, mechanically robust, flexible and transparent ALNHS@PDMS film, integrated with a portable Raman spectrometer, shows great potential for point-of-care testing (POCT)in practical applications.

The Rise of Structurally Anisotropic Plasmonic Janus Gold Nanostars

Nanostructures intrinsically possessing two different structural or functional features, often called Janus nanoparticles, are emerging as a potential material for sensing, catalysis, and biomedical applications. Herein, we report the synthesis of plasmonic gold Janus nanostars (NSs) possessing a smooth concave pentagonal morphology with sharp tips and edges on one side and, contrastingly, a crumbled morphology on the other. The methodology reported herein for their synthesis - a single-step growth reaction - is different from any other Janus nanoparticle preparation involving either template-assisted growth or a masking technique. Interestingly, the coexistence of lower- and higher-index facets was found in these Janus NSs. The general paradigm for synthesizing gold Janus NSs was investigated by understanding the kinetic control mechanism with the combinatorial effect of all the reagents responsible for the structure. The optical properties of the Janus NSs were realized by corelating their extinction spectra with the simulated data. The size-dependent surface-enhanced Raman scattering (SERS) activity of these Janus NSs was studied with 1,4-BDT as the model analyte. Finite-difference time-domain simulations for differently sized particles revealed the distribution of electromagnetic hot-spots over the particles resulting in enhancement of the SERS signal in a size-dependent manner.

Bioinspired hot-spot engineering strategy towards ultrasensitive SERS sandwich biosensor for bacterial detection

Surface-enhanced Raman spectroscopy (SERS) sandwich biosensors have received tremendous attention in early diagnosis of bacterial infections. However, efficiently engineering nanoscale plasmonic hots pots (HS) towards ultrasensitive SERS detection still remains challenging. Herein, we propose a bioinspired synergistic HS engineering strategy to construct ultrasensitive SERS sandwich bacterial sensor (named USSB), by coupling bioinspired signal module and plasmonic enrichment module to synergistically boost the number and intensity of HS. The bioinspired signal module is based on dendritic mesoporous silica nanocarrier (DMSN) loaded with plasmonic nanoparticles and SERS tag, while magnetic Fe3O4 nanoparticles coated with Au shell are employed in plasmonic enrichment module. We demonstrate that DMSN effectively shrank nanogaps between plasmonic nanoparticles to improve HS intensity. Meanwhile, plasmonic enrichment module contributed to plenty of additional HS inside and outside individual "sandwich". Ascribing to the boosted number and intensity of HS, the constructed USSB sensor exhibits ultrahigh detection sensitivity (7 CFU/mL) and selectivity towards model pathogenic bacteria of Staphylococcus aureus. Remarkably, the USSB sensor enables fast and accurate bacterial detection in real blood samples of septic mice, achieving early diagnosis of bacterial sepsis. The proposed bioinspired synergistic HS engineering strategy opens up a new direction for constructing ultrasensitive SERS sandwich biosensors, and may promote their advancing applications in the early diagnosis and prognosis of devastating diseases.

Fabrication of Flexible Pyramid Array as SERS Substrate for Direct Sampling and Reproducible Detection

Rapid extraction and analysis of target molecules from irregular surfaces are in high demand in the field of on-site analysis. Herein, a flexible platform used for surface-enhanced Raman scattering (SERS) based on an ordered polymer pyramid structure with half-imbedded silver nanoparticles (AgNPs) was prepared to address this issue. The fabrication includes the following steps: (1) creating inverted pyramid arrays in silicon substrate, (2) preparing a layer of AgNPs on the surface of the inverted pyramids, and (3) obtaining a substrate with an ordered polymer pyramids array with half-imbedded AgNPs by the molding method. This flexible substrate is capable of rapid extraction via a simple and convenient "paste and peel off" method. In addition, the substrate exhibits great repeatability and good sensitivity thanks to the uniformity and larger surface area of the ordered pyramids. The density of "hot spots" (local electromagnetic field with high intensity) is increased on the structured surface. Semi-imbedding silver particles in the polymer pyramids makes "hot spots" robust on the substrate. In addition, the preprepared silicon template with the inverted pyramids can be reused, which greatly reduces the production cost. With this substrate, we successfully analyzed thiram molecules on the epidermis of apples, cucumbers, and oranges, and the detection limits are 2.4, 3, and 3 ng/cm2, respectively. These results demonstrate the great potential of the substrate for in situ analysis, which can provide reference for the design of ideal SERS substrates.

Fabrication of flexible SERS substrate based on Au nanostars and PDMS for sensitive detection of Thiram residue in apple juice

We developed a novel fabrication of flexible surface-enhanced Raman scattering (SERS) substrate to perform selective and sensitive determination of thiram residue in fruits and juices. Au nanostars (Au NSs) with multi-branching structure were self-assembled on aminated Polydimethylsiloxane (PDMS) slides by electrostatic interaction. By measuring the Thiram's characteristic peak intensity at 1371 cm^-1, the SERS method could distinguish Thiram from other pesticide residues. A good linear relationship between the peak intensity at 1371 cm^-1 and thiram's concentration was established at the range from 0.01 ppm to 100 ppm and the Limit of detection is 0.0048 ppm. We directly used this SERS substrate to detect Thiram in apple juice. By standard addition method, recoveries varied in the range of 97.05% to 106.00% and the RSD were from 3.26% to 9.35%. The SERS substrate exhibited a good sensitivity, stability and selectively for the detection of Thiram in food samples, which can be spread as a common method for the detection of pesticides in food samples.

Flexible, high-performance and facile PVA/cellulose/Ag SERS chips for in-situ and rapid detection of thiram pesticide in apple juice

Flexible surface-enhanced Raman scattering (SERS) sensors have gained significant attention for their practical applications in detecting chemical and biological molecules. However, the fabrication of flexible SERS chips is often complex and requires advanced techniques. In this study, we present a simple and rapid method to design a flexible SERS chip based on polyvinyl alcohol (PVA), cellulose, and silver nanoparticles (AgNPs) using mechanical stirring and drying methods. Benefiting from the abundant hydroxide groups on cellulose, AgNPs easily adhere and distribute evenly on the cellulose surface. The combination of PVA and cellulose forms a bendable film-like SERS chip. This chip allows convenient immersion in liquid analyte samples. We demonstrate its effectiveness by using it to detect the thiram pesticide in apple juice using the "dip and dry" method, achieving an outstanding detection limit of 1.01 × 10-8 M. The Raman signals on the SERS chips exhibit high repeatability and reproducibility, with relative standard deviation values below 10%. These findings show that the flexible PVA/cellulose/Ag SERS chips is a strong candidate for real-world analysis.

High-performance homogeneous carboxymethylcellulose-stabilized Au@Ag NRs-CMC surface-enhanced Raman scattering chip for thiram detection in fruits

Cellulose material holds considerable promise for effective surface-enhanced Raman scattering (SERS) substrate construction due to its extensive availability, chemically modifying capacity, ease of manufacture, high flexibility and low optical activity. A large-area, high-sensitivity, stable and uniform Au@Ag nanorods (NRs)-CMC substrate was successfully developed via electrostatic repulsion by using negatively-charged core-shell Au@Ag NRs as SERS active plasmonic nanomaterial, combined with negatively-charged carboxymethylcellulose (CMC) hydrogel for nanoparticles stabilization, homodisperse and protection. The obtained Au@Ag NRs-CMC substrate showed excellent sensitivity for the detection of thiram residues in fruits containing low and abundant pigment interferents, such as apples and blueberries, with detection limits of 58 and 78 ppb, respectively. Additionally, it retained more than 80% SERS performance after storage for 9 months under ambient conditions, demonstrating its great potential in facilitating the commercialization of cellulose-based SERS technology for cost-effective detection of food contaminants with advantages of facile preparation procedure, uniformity, reproducibility and long-term stability.

SERS-active plasmonic metal NP-CsPbX3 films for multiple veterinary drug residues detection

Sensitive and multiple veterinary drug residues detection is of important for food safety. Herein, uniform plasmonic Au nanobipyramids@Ag nanorods (Au NBP@Ag NR)-CsPbX₃ films with strong surface-enhanced Raman scattering (SERS) activity were constructed. The effects of different CsPbX₃ (X = Cl, Br, I, or mixed halogens) quantum dots (QDs) on the SERS performances of plasmonic metal NP films were investigated. CsPbI₃ QDs with large dielectric constant could be served as the dielectric media to retard the attenuation of electromagnetic evanescent wave, inducing strong electromagnetic strength for SERS enhancement. Plasmon-induced metal-to-perovskite interfacial charge transfer transition also contributed to SERS enhancement. SERS-active plasmonic Au NBP@Ag NR-CsPbI₃ films had excellent sensitivity and high reproducibility for quantitative, accurate and multiple detection of chloramphenicol, diazepam and malachite green in food matrix. This work deepened the understanding of the SERS enhancement mechanisms of plasmonic metal NP-perovskite hybrid heterostructures, showing potential prospects in food safety monitoring.

A hybrid SERS sensing platform constructed by porous carbon/Ag nanoparticles for efficient imatinib detection in bio-environment

Surface enhanced Raman scattering (SERS) is a rapid and non-destructive spectral detection technique, and has been widely implemented on trace-level molecule detection. In this work, a hybrid SERS substrate constructed by porous carbon film and silver nanoparticles (PCs/Ag NPs) was developed and then used for imatinib (IMT) detection in bio-environment. The PCs/Ag NPs was prepared by direct carbonizing the gelatin-AgNO₃ film in the air atmosphere, and an enhancement factor (EF) of 10⁶ was achieved with R6G as the Raman reporter. Hereafter, this SERS substrate was used as the label-free sensing platform to detect the IMT in the serum, and the experimental results indicate that the substrate is conducive to eliminating the interference from the complex biological molecules in the serum, and the characteristic Raman peaks belonging to IMT (10^-4 M) are accurately resolved. Furthermore, the SERS substrate was used to trace the IMT in the whole blood, the trace of ultra-low concertation of IMT is rapidly discovered without any pretreatment. Thus, this work finally suggests that the proposed sensing platform provides a rapid and reliable method for IMT detection in the bio-environment and offers a potential for its application in therapeutic drug monitoring.

Highly sensitive technique for detection of adulterants in centella herbal samples using surface enhanced Raman spectroscopy (SERS)

The trace level detection of adulterants in food, nutritional supplements and medicinal herbs is highly challenging in the field of food processing and herbal industries. In addition, laborious sample processing procedures and well trained personnel are required to analyse the samples using conventional analytical equipments. In this study, a highly sensitive technique with minimal sampling processes and human intervention is proposed for the trace amount detection of pesticidal residues in centella powder. Herein, graphene oxide gold (GO-Au) nanocomposite coated parafilm is developed as substrate by simple dropcasting technique to facilitate dual surface enhanced Raman signal. The dual SERS enhancement involving chemical enhancement from graphene and electromagnetic signal enhancement from gold nanoparticles is utilized for detection of chlorpyrifos in the ppm level concentration. The flexible polymeric surfaces could be the better choice for SERS substrates due to their inherent properties such as flexibility, transparency, roughness and hydrophobicity. Among the various types of flexible substrates explored, GO-Au nanocomposites coated parafilm substrates showed better Raman signal enhancement. Parafilm coated with GO-Au nanocomposites is successful in achieving detection limits down to 0.1 ppm of chlorpyrifos in centella herbal powder sample. Thus, the fabricated parafilm based GO-Au SERS substrates could be used as a screening tool at quality control of herbal product manufacturing sectors for trace level detection of adulterants in herbal samples from their unique chemical and structural information.

A robust SERS calibration using a pseudo-internal intensity reference

Surface-enhanced Raman scattering (SERS) with high molecular sensitivity and specificity is a powerful nondestructive analytical tool. Since its discovery, SERS measurements have suffered from the vulnerability of calibration curve, which makes quantification analysis a great challenge. In this work, we report a robust calibration method by introducing a referenced measurement as the intensity standard. This intensity reference not only has the advantages of the internal standard method such as reflecting the SERS substrate enhancement, but also avoids the introduction of competing adsorption between target molecules and the internal standard. Based on the normalized calibration curve, the magnitude of the R6G concentration can be well evaluated from 10^-7 M to 10^-12 M. Furthermore, we demonstrate that this pseudo-internal standard method can also work well using a different type of molecule as the reference. This SERS calibration method would be beneficial for the development of quantitative SERS analysis.

Plasmonic surface-enhanced Raman scattering nano-substrates for detection of anionic environmental contaminants: Current progress and future perspectives

Surface-enhanced Raman scattering spectroscopy (SERS) is a powerful technique of vibrational spectroscopy based on the inelastic scattering of incident photons by molecular species. It has unique properties such as ultra-sensitivity, selectivity, non-destructivity, speed, and fingerprinting properties for analytical and sensing applications. This enables SERS to be widely used in real-world sample analysis and basic plasmonic mechanistic studies. However, the desirable properties of SERS are compromised by the high cost and low reproducibility of the signals. The development of multifunctional, stable and reusable nano-engineered SERS substrates is a viable solution to circumvent these drawbacks. Recently, plasmonic SERS active nano-substrates with various morphologies have attracted the attention of researchers due to promising properties such as the formation of dense hot spots, additional stability, tunable and controlled morphology, and surface functionalization. This comprehensive review focused on the current advances in the field of SERS active nanosubstrates suitable for the detection and quantification of anionic environmental pollutants. The common fabrication methods, including the techniques for morphological adjustments and surface modification, substrate categories, and the design of nanotechnologically fabricated plasmonic SERS substrates for anion detection are systematically presented. Here, the need for the design, synthesis, and functionalization of SERS nano-substrates for anions of great environmental importance is explained in detail. In addition, the broad categories of SERS nano-substrates, namely colloid-based SERS substrates and solid-support SERS substrates are discussed. Moreover, a brief discussion of SERS detection of certain anionic pollutants in the environment is presented. Finally, the prospects in the fabrication and commercialization of pilot-scale handheld SERS sensors and the construction of smart nanosubstrates integrated with novel amplifying materials for the detection of anions of environmental and health concern are proposed.

Fabrication of a metal organic framework (MOF)-modified Au nanoparticle array for sensitive and stable SERS sensing of paraquat in cereals

A high-performance Au@MIL-101/PMMA/DT surface-enhanced Raman scattering (SERS) substrate was fabricated for sensitive and stable detection of paraquat by self-assembling metal organic framework-modified Au nanoparticles (Au@MIL-101) on a poly(methyl methacrylate) (PMMA) film and then immobilizing the formed substrate onto a duct tape (DT). The highly closely packed Au@MIL-101 array provided intensive hotspots for SERS sensing. The MIL-101 layer modified on the surface of Au nanoparticles could absorb paraquat to the electromagnetic enhancement area of Au nanoparticles. The DT on the bottom made the substrate smoother, which is beneficial for achieving a more stable detection performance. As a result, the constructed substrate exhibited outstanding uniformity with relative standard deviations of 9.47% and storage stability for 2 months. For detecting paraquat, the substrate showed a low detection limit of 7.1 × 10^-9  M (1.83 µg/kg) and wide linear range from 10^-8 to 10^-2  M. Furthermore, the substrate showed good detection performance in real cereal samples with desirable recovery rates from 91.57% to 102.32%.

Flexible Au@AgNRs/CMC/qPCR film with enhanced sensitivity, homogeneity and stability for in-situ extraction and SERS detection of thiabendazole on fruits

In this study, a high-performance, stable and homogeneous Au@AgNRs/CMC/qPCR flexible film surface-enhanced Raman scattering (SERS) substrate was constructed by synergistically stabilizing and protecting bimetallic core-shell Au@Ag nanorods (Au@AgNRs) with carboxymethylcellulose (CMC) and fluorescent-quantitative-polymerase-chain-reaction (qPCR) film. The network structure of CMC immobilized and aligned Au@AgNRs through coordination of carboxyl groups with surface Ag atoms to provide intensive and stable 'hot spots', and the qPCR bilayer film performed as carrier and barrier to protect Au@AgNRs from oxidation, humidity and optical damage and improved the robustness and stability. The Au@AgNRs/CMC/qPCR film was used for in-situ extraction and SERS detection of thiabendazole on nectarine (0.24 ppm) and lemon (0.27 ppm) with low detection of limits. Furthermore, it retained 98.6% SERS performance after storage for 90 days under ambient conditions, revealing the great potential in promoting the commercialization of the SERS technique for sensitive contaminants sensing with simple fabrication procedures, homogeneity, reproducibility and long-term stability.

Nondestructive testing methods for pesticide residue in food commodities: A review

Pesticides play an important role in increasing the overall yield and productivity of agricultural foods by controlling pests, insects, and numerous plant-related diseases. However, the overuse of pesticides has resulted in pesticide contamination of food products and water bodies, as well as disruption of ecological and environmental systems. Global health authorities have set limits for pesticide residues in individual food products to ensure the availability of safe foods in the supply system and to assist farmers in developing the best agronomic practices for crop production. Therefore, the use of nondestructive testing (NDT) methods for pesticide residue detection is gaining interest in the food supply chain. The NDT techniques have several advantages, such as simultaneous measurement of chemical and physical characteristics of food without destroying the product. Although numerous studies have been conducted on NDT for pesticide residue in agro-food products, there are still challenges in real-time implementation. Further study on NDT methods is needed to establish their potential for supplementing existing methods, identifying mixed pesticides, and performing volumetric quantification (not surface accumulation alone).

A flexible surface-enhanced Raman Spectroscopy chip integrated with microlens

A novel flexible Surface-enhanced Raman Spectroscopy (SERS) chip integrated with microlens was proposed and designed, which consisted of PDMS film, planoconvex microlens, and silver nanoparticles (AgNPs) monolayer, and was of high signal collection efficiency. The flexible PDMS film integrated with microlens was designed by optical simulation, and fabricated by optimized micromachining process. AgNPs monolayer were uniformly assembled on the other side of the PDMS film through a liquid-liquid interface self-assembly method to form SERS chip. The prepared chip revealed excellent SERS performance with a Raman enhancement factor of about 10⁷ and a signal variation of <11.5 %. The SERS chip was successfully utilized for in-situ detection of thiram residues on tomato skins, and its characteristic peaks could still be clearly distinguished when the concentration was down to 2.5 μM. It was shown that the proposed SERS chip was suitable for in-situ detection of a real sample on complex surface morphology and shown potential prospect in the fields of chemical and biomedical detections.

Electrochemical synthesis of Co/Ni bimetal-organic frameworks: A high-performance SERS platform for detection of tetracycline

Surface-enhanced Raman scattering (SERS) enables food contaminants monitoring become facile and efficient. Herein, a facile strategy of integrating three-dimensional Ni form with Co/Ni bimetal-organic frameworks combining Ag nanoparticles via electrochemical synthesis method was proposed to develop a high-performance SERS substrate (CoNi-ZIFs@Ag@NF) for efficient detection of tetracycline. The flexible Ni foam (NF) acted as scaffold which can contribute to dramatically enhancing intrinsic electrical conductivity and endowing prepared substrate with high stability and uniform distribution of Ag nanoparticles. Furthermore, the pre-concentration effect of CoNi-ZIFs@Ag@NF for target molecules enhanced SERS performance dramatically. Besides, tetracycline was sensitively detected using CoNi-ZIFs@Ag@NF with low limit of detection (1.0 × 10^-11 M) and wide linear detection range (10^-10 - 10^-5 M) in aqueous solution. Also, the satisfactory recovery (94.45 - 114.25 %) was realized with less than 6.78 % of RSD in real samples. This method would provide a potential and high-performance substrate for SERS monitoring of tetracycline in food and environment.

Hydrophobic expanded graphite-covered support to construct flexible and stable SERS substrate for sensitive determination by paste-sampling from irregular surfaces

Surface enhanced Raman spectroscopy (SERS) is a promising technique for trace determination. More and more attention is focused on hybrid SERS substrates, which coupled with noble metal nanoparticles and carbon-based materials. Herein, expanded graphite (EG) is used to prepare EG-covered support by ultrasonic washing and filtration. Such support is flexible and can be cut into any shape. And the contact angle (θe) for Au nanorods (Au NRs) sol on the EG-covered support was 108.2° and the hydrophobic surface is helpful for Au NRs to construct 'hot spots' during evaporation. The limits of detection (LOD) for crystal violet (CV), thiram, malachite green (MG) and methylene blue (MB) were as low as 1 ppb, 50 ppb, 1 ppb and 1 ppb, respectively. Moreover, a fast and convenient 'paste-sampling' method could be employed for trace contaminants on real samples, because EG-based Au NRs substrate is of flexibility and porosity. Thus, CV residue on shrimp could be determined lower than 1 ppb and thiram residue on grapes could be identified lower than 50 ppb. In addition to high sensitivity, the stability of EG-based Au NRs substrate is also very good. Even after acid/alkali pretreatment (pH = 4∼10) or 30 min of thermal treatment (T = 20∼100 °C), the enhancement of the substrate remained stable. What's more, the substrate could be stored as long as 30 days. The highly stable, sensitive, cost-effective and easy-to-produce EG-based Au NRs substrates exhibit a great potential to promote application of SERS for routine analysis.

Alternative methods of monitoring emerging contaminants in water: a review

Anthropogenic activities have steadily increased the release of emerging contaminants (ECs) in aquatic bodies, and these ECs may have adverse effects on humans even at their trace (μg L^-1) levels. Their occurrence in wastewater systems is more common, and the current wastewater treatment facilities are inefficient in eliminating many of such persistent ECs. "Gold standard" techniques such as chromatography, mass spectrometry, and other high-resolution mass spectrometers are used for the quantification of ECs of various kinds, but they all have significant limitations. This paper reviews the alternative methods for EC detection, which include voltammetry, potentiometry, amperometry, electrochemical impedance spectroscopy (EIS) based electrochemical methods, colorimetry, surface-enhanced Raman spectroscopy (SERS), fluorescence probes, and fluorescence spectroscopy-based optical techniques. These alternative techniques have several advantages over conventional techniques, including low sample volume, excludes solid phase extraction procedure, high sensitivity, selectivity, portability, reproducibility, rapidity, low cost, and the ability to monitor ECs in real time. This review summarises each of the alternative methods for detecting ECs in water samples and their respective limits of detection (LODs). The sensitivity of each technique varied depending on the type of EC measured, type of electrochemical probe and electrode, substrates, type of nanoparticle (NP), the physicochemical parameters of water samples tested, and more. Nevertheless, this paper also focuses on some of the current challenges encountered by these alternative methods in monitoring ECs.

LSPR Tunable Ag@PDMS SERS Substrate for High Sensitivity and Uniformity Detection of Dye Molecules

At present, the use of efficient and cost-effective methods to construct plasmonic surface-enhanced Raman scattering (SERS) substrates of high sensitivity, uniformity and reproducibility is still crucial to satisfy the practical application of SERS technology. In this paper, a localized surface plasmonic resonance (LSPR) tunable flexible Ag@PDMS substrate was successfully constructed by the low-cost bio-template-stripping method and magnetron sputtering technology. The theory proves that the local electromagnetic field enhancement and "hot spot" distribution is adjustable by modifying the size of the optical cavity unit in the periodicity nanocavity array structure. Experimentally, using rhodamine 6G (R6G) as the target analyte, the SERS performance of optimal Ag@PDMS substrate (Ag film thickness for 315 nm) was researched in detail, which the minimum detection limit was 10^-11 M and the enhancement factor was calculated as 8.03 × 10⁸, indicating its high sensitivity. The relative standard deviation (RSD) was calculated as 10.38%, showing that the prepared substrate had excellent electromagnetic field enhancement uniformity. At last, the trace detection of Crystal violet (CV, LOD = 10^-9 M) and the simultaneous detection of three common dyes (R6G, CV and Methylene blue (MB) mixture) were also realized. This result suggests that the SERS substrate has a good application prospect in the quantitative and qualitative detection of dye molecules.

[Surface-enhanced Raman detection of deoxynivalenol allenol in agricultural products]

Fungal toxins are secondary metabolites of fungi. Food is highly susceptible to contamination by various fungal species that produce fungal toxins during production and storage. Fungal toxins can cause either acute or chronic poisoning from long-term, low-dose ingestion. Therefore, fungal toxins have become a topic of international interest as a food safety issue. Deoxynivalenol (DON) is a single-terminal sporam toxin produced predominantly by Fusarium graminae and Fusarium pinkosa. DON is globally one of the most common fungal toxins contaminating grain, food, and feed. Various methods have been applied for screening and detecting DON; however, these methods utilize expensive instruments and entail complex operations, poor repeatability, and low sensitivity. Therefore, the development of a simpler, more rapid, and sensitive sensing technology for DON detection is important for applications within the agriculture and food industry. Recently, surface-enhanced Raman scattering (SERS) has become a rapidly developing spectral analysis technology with unique advantages, including high sensitivity, high throughput, and rapid response rates. Therefore, attempts have been made to apply the SERS technique to detecting DON. However, due to the limitations concerning SERS substrates, the currently established SERS method exhibits serious problems, including low sensitivity and weak anti-interference ability, and cannot meet the requirements of sample detection. Recently, our group has prepared aggregated silver nanoparticles (a-AgNPs/CDs) with high SERS activity by using single-layer carbon-based dots (CDs) as a capping agent. Moreover, the obtained materials (a-AgNPs/CDs) were combined with hydrogel technology to prepare novel hydrogel SERS chips. The obtained SERS chips exhibited several advantages over traditional SERS substrates, such as high sensitivity, long-term stability, improved uniformity, and strong anti-interference capabilities. Herein, a novel SERS method for rapid screening and detection of DON in grains was established using a portable Raman spectrometer based on the developed hydrogel SERS chips. The main experimental conditions were optimized before the SERS detection of DON; this included the optimization of the hydrogel SERS chip soaking temperature and time in the DON solution. It was found that the optimal soaking temperature and time were 40 ℃ and 5 min, respectively. Under the optimal SERS detection conditions, the linear response range of DON was 1-10000 μg/kg (correlation coefficient (R2)=0.9967), and the limit of detection (LOD) was 0.14 μg/kg. Due to the unique pore size structure of the hydrogel, common sugar, protein, oil, pigment, and other interfering substances in the sample matrix were blocked outside the hydrogel. Therefore, only simple extraction was required while detecting complex samples. This method was applied to detecting DON in wheat flour, yielding recoveries of 97.3%-103% with relative standard deviations of 4.2%-5.0%. The established SERS method for DON detection exhibits a broader response range, high sensitivity, good repeatability, rapid response, simple operation, and strong anti-interference capability. This shows that the laboratory-constructed hydrogel SERS chip has excellent potential for rapid screening and detection of biotoxins in food.

Rapid Immobilization of Silver Nanoparticles via Amino-quinone Coatings Enables Surface-Enhanced Raman Scattering Detection

Immobilization of metal nanoparticles (NPs) on flexible substrates for surface-enhanced Raman scattering (SERS) has received great attention. Anchoring NPs on substrates generally involves the process of surface modification, thanks to its simple, universal, and nondestructive features. 2-Hydroxy-1,4-naphthoquinone (HNQ), a plant-derived compound used to dye hairs and nails, may interact with polyamine or metal ions to form a surface coating. Here, we report the formation of amino-quinone coatings via the co-deposition of HNQ and polyethyleneimine, which provides a functionalized platform to rapidly immobilize Ag NPs on substrates such as a poly(dimethylsiloxane) (PDMS) film to fabricate Ag-PDMS substrates for SERS detection. The detection concentrations are down to 10^-8 M for rhodamine 6G. This work expands the system of surface co-deposition and further provides a facile route to prepare a highly efficient SERS substrate.

Highly Sensitive, Robust, and Recyclable TiO2/AgNP Substrate for SERS Detection

Label-free biosensors provide an important platform for detecting chemical and biological substances without needing extra labeling agents. Unlike surface-based techniques such as surface plasmon resonance (SPR), interference, and ellipsometry, surface-enhanced Raman spectroscopy (SERS) possesses the advantage of monitoring analytes both on surfaces and in solutions. Increasing the SERS enhancement is crucial to preparing high-quality substrates without quickly losing their stability, sensitivity, and repeatability. However, fabrication methods based on wet chemistry, nanoimprint lithography, spark discharge, and laser ablation have drawbacks of waste of time, complicated processes, or nonreproducibility in surface topography. This study reports the preparation of recyclable TiO₂/Ag nanoparticle (AgNP) substrates by using simple arc ion plating and direct-current (dc) magnetron sputtering technologies. The deposited anatase-phased TiO₂ ensured the photocatalytic degradation of analytes. By measuring the Raman spectra of rhodamine 6G (R6G) in titrated concentrations, a limit of detection (LOD) of 10⁻⁸ M and a SERS enhancement factor (EF) of 1.01 × 10⁹ were attained. Self-cleaning was performed via UV irradiation, and recyclability was achieved after at least five cycles of detection and degradation. The proposed TiO₂/AgNP substrates have the potential to serve as eco-friendly SERS enhancers for label-free detection of various chemical and biological substances.

Quantitative SERS sensing mediated by internal standard Raman signal from silica nanoparticles in flexible polymer matrix

Attributed to poor signal uniformity and external interference, ultrasensitive surface-enhanced Raman spectroscopy (SERS) still faces difficulties in the reliable and quantitative detection of trace molecules. Here, a facile Ag/Si/sodium carboxy methyl cellulose (NaCMC) film with internal standard (IS) was promoted for quantitative determination of thiram. The effects of preparation conditions on SERS activity of the film were systematically investigated and then a flexible SERS substrate with high sensitivity and uniformity was fabricated. The enhancement factor was calculated to be 1.12 × 10⁶ and SERS mapping was recorded with a relative standard deviation value of 19.8% by utilizing 4-mercaptobenzoic acid (4-MBA) as target molecule. Additionally, the dominant contribution of the IS from encapsulated Si nanoparticles (NPs) was confirmed in the quantitative assay of 4-MBA and thiram, facilitating attractive fitting coefficients (R²) as 0.991 and 0.998. Besides that, the proposed flexible film was conducted to scrub trace thiram from the surfaces of apple, orange, and cucumber, resulting in recoveries of 89%, 94%, and 91%. A smart and facile quantitative SERS substrate was developed here for monitoring trace biochemical molecules, verifying its potential utilizations in monitoring pesticide residues.

Flexible surface-enhanced Raman scatting substrates: recent advances in their principles, design strategies, diversified material selections and applications

Surface-enhanced Raman scattering (SERS) is widely used as a powerful analytical technology in cutting-edge areas such as food safety, biology, chemistry, and medical diagnosis, providing ultra-fast, ultra-sensitive, nondestructive characterization and achieving ultra-high detection sensitivity even down to the single-molecule level. Development of Raman spectroscopy is strongly dependent on high-performance SERS substrates, which have long evolved from the early days of rough metal electrodes to periodic nanopatterned arrays building on solid supporting substrates. For rigid SERS substrates, however, their applications are restricted by sophisticated pretreatments for detecting solid samples with non-planar surfaces. It is therefore essential to reassert the principles in constructing flexible SERS substrates. Herein, we comprehensively review the state-of-the-art in understanding, preparing and using flexible SERS. The basic mechanisms behind the flexible SERS are briefly outlined, typical design strategies are highlighted and diversified selection of materials in preparing flexible SERS substrates are reviewed. Then the recent achievements of various interdisciplinary applications based on flexible SERS substrates are summarized. Finally, the challenges and perspectives for future evolution of flexible SERS and their applications are demonstrated. We propose new research directions focused on stimulating the real potential of SERS as an advanced analytical technique for commercialization.

Analyzing macromolecular composition of E. Coli O157:H7 using Raman-stable isotope probing

Metabolic dynamics of bacterial cells is needed for understanding the correlation between changes in environmental conditions and cell metabolic activity. In this study, Raman spectroscopy combined with deuterium labelling was used to analyze the metabolic activity of a single Escherichia coli O157:H7 cell. The incorporation of deuterium from heavy water into cellular biomolecules resulted in the formation of carbon-deuterium (CD) peaks in the Raman spectra, indicating the cell metabolic activity. The broad vibrational peaks corresponding to CD and CH peaks encompassed different specific shifts of macromolecules such as protein, lipids, and nucleic acid. The utilization of tryptophan and oleic acid by the cell as the sole carbon source led to changes in cell lipid composition, as indicated by new peaks in the second derivative spectra. Thus, the proposed method could semi-quantitatively determine total metabolic activity, macromolecule specific identification, and lipid and protein metabolism in a single cell.

Silver Nanoparticle Films Obtained by Convective Self-Assembly for Surface-Enhanced Raman Spectroscopy Analyses of the Pesticides Thiabendazole and Endosulfan

Pesticides pose a great threat to human health and their rapid detection has become an urgent public safety issue engaging the scientific community to search for fast and reliable detection techniques. In this context, Surface Enhanced Raman Spectroscopy (SERS) has emerged as a valuable detection and analysis tool due to its high sensitivity and selectivity, proving its suitability for the food industry and environmental monitoring applications. Here, we report on the fabrication of colloidal silver nanoparticle (AgNP) films by convective self-assembly (CSA) on solid planar substrate and their use for the SERS analyses of two types of pesticides, the fungicide thiabendazole (TBZ) and the insecticide α-endosulfan (α-ES). Electron microscopy shows that these nanoparticle films are dense, highly compact, and uniform across several mm² areas. The SERS efficiency of the fabricated AgNP films is evaluated using a well-known Raman probe, p-aminothiophenol, for multiple excitation laser lines (532 nm, 633 nm, and 785 nm). The films exhibit the largest SERS enhancement factors for 785 nm excitation, reaching values larger than 10⁵. Thiabendazole could be readily adsorbed on the AgNPs without any sample surface functionalization and detected down to 10⁻⁶ M, reaching the sub-ppm range. Endosulfan, a challenging analyte with poor affinity to metal surfaces, was captured near the metal surface by using self-assembled alkane thiol monolayers (hexanethiol and octanethiol), as demonstrated by the thorough vibrational band analysis, and supported by density functional theory (DFT) calculations. In addition, principal component analysis (PCA) based on SERS spectra offers significant leverage in discrimination of the molecules anchored onto the metallic nanostructured surface. This present study demonstrates the utility of self-assembled colloidal nanoparticle films as SERS substrates for a broad range of analytes (para-aminothiophenol, thiabendazole, α-endosulfan, and alkanethiols) and contributes to the development of SERS-based sensors for pesticides detection, identification and monitoring.

Detection of Bioactive Metabolites in Escherichia Coli Cultures Using Surface-Enhanced Raman Spectroscopy

Detection of bioactive metabolites produced by bacteria is important for identifying biomarkers for infectious diseases. In this study, a surface-enhanced Raman spectroscopy (SERS)-based technique was developed for the detection of bioactive metabolite indole produced by Escherichia coli (E. coli) in biological media. The use of highly sensitive Au@Ag core-shell nanoparticles resulted in the detection of indole concentration as low as 0.0886 mM in standard solution. The supplementation of growth media with 5 mM of exogenous tryptophan resulted in the production of a maximum yield of indole of 3.139 mM by E. coli O157:H7 at 37 °C. The growth of bacterial cells was reduced from 47.73 × 10⁸ to 1.033 × 10⁶ CFU/mL when the cells were grown in 0 and 10 mM exogenous tryptophan, respectively. The amount of indole in the Luria-Bertani (LB) media had an inverse correlation with the growth of cells, which resulted in a three-log reduction in the colony-forming unit when the indole concentration in the media was 20 times higher than normal. This work demonstrates that SERS is an effective and highly sensitive method for rapid detection of bioactive metabolites in biological matrix.

Hybridizing Silver Nanoparticles in Hydrogel for High-Performance Flexible SERS Chips

An ideal surface-enhanced Raman scattering (SERS) substrate should have high sensitivity, long-term stability, excellent repeatability, and strong anti-interference. In the present work, single-layer carbon-based dot (CD)-capped Ag nanoparticle aggregates (a-AgNPs/CDs) with high SERS activity are synthesized and hybridized with a hydrogel to prepare novel hydrogel SERS chips. Benefiting from the unique properties of a-AgNPs/CDs and the hydrogel, the constructed hydrogel SERS chips show excellent performances. Taking crystal violet detection as an example, the hydrogel SERS chips show a detection limit of around 1 × 10^-16 mol/L (high sensitivity), maintain above 96.40% of SERS activity even after 14 weeks of storage (long-term stability), and display point-to-point relative standard deviation (RSD) in one chip as low as 1.43% (outstanding repeatability) and RSD in different chips as low as 2.75% (excellent reproducibility). Furthermore, the self-extraction effect of the hydrogel enables the flexible hydrogel SERS chips to be used for analyzing various real samples including soybean milk, juices, and fruits without any complex pretreatment. For instance, the hydrogel SERS chips are able to detect trace thiram and 2-(4-thiazolyl)benzimidazole with the detection limits of 1 and 5 ppb in liquid samples, respectively, and of 1 and 2.5 ng/cm² on the peel of fruits, respectively. The self-extraction functional flexible SERS chips offer a reliable and convenient platform for the quick detection and on-site monitoring of chemical contaminants.

Multi-analyte High-Throughput Microplate-SERS Reader with Controllable Liquid Interfacial Arrays

High-throughput surface-enhanced Raman scattering (SERS) reader, especially for liquid sample testing, is of great significance and huge demand in biology, environment, and other analytical fields. Inspired by the principle of microplate reader, herein, we developed a microplate-SERS reader for semiautomatic and high-throughput assays by virtue of three-dimensional liquid interfacial arrays (LIAs). For the first time, the formation of LIA in oil-in-water state, water-in-oil state, and two-dimensional plane state is realized by operating the hydrophilicity (contact angle) of the container. Through the force analysis of LIA, the effect of organic (O) phase density on the relative position of LIA was quantified. In addition, the optimized reader offers fast and continuous semiautomatic detection of 12 samples below 10 min with great signal reproducibility (calibration with the characteristic peak of O phase as the internal standard). The isolated wells in the microplate prevent analyte cross talk, allowing accurate quantification of each sample. Multiplex analysis capability highlights that this reader has the ability of rapid identification and quantification of samples containing various analytes and concentrations. The results demonstrate high-resolution dual and triple analyte detection with fully preserved signal and Raman features of individual analytes in a mixture, which implies that it also has excellent anticounterfeiting applications. This microplate-SERS reader combines the superior advantages of the LIA, microplate, and SERS techniques to retrieve the molecular vibrational fingerprints of various chemicals in complex media.

Gap controlled self-assembly Au@Ag@Au NPs for SERS assay of thiram

Thiram (TRM), one dithiocarbamate fungicide, is hazardous due to its ever-growing threat to our production and living. In order to detecting TRM more sensitively, a subtle surface-enhanced Raman scattering (SERS) substrate was reported to achieve TRM detection based on oil-water biphasic self-assembly interface of multi-interstitial Au@Ag@Au NPs crosslinking with 4,4' -Diamino-p-Terphenyl (DATP). This Au@Ag@Au@DATP array shows a noteworthy enhanced Raman signal and stability by controlling the inter-particle spacing of Au@Ag@Au NPs, which overcomes problems of traditional randomly self-assembly methods without cross linker. The Au@Ag@Au@DATP array attained the limit of detection (LOD) of 7.56 × 10^-3 ppb for TRM. In addition, this work gives a new approach for controlling gap of SERS hot spot, which have distinct potential in rapid assessment and identification of pesticides on foods.

Photosensitized Peroxidase Mimicry at the Hierarchical 0D/2D Heterojunction-Like Quasi Metal-Organic Framework Interface for Boosting Biocatalytic Disinfection

Metal-organic frameworks (MOFs) are a versatile toolbox for the bioinspired design of nanozymes for antibacterial applications and beyond, however, designing a nanozyme by the hierarchical quasi-MOF scheme remains largely unpracticed. This work exemplifies the preferential structure-activity correlation of a bimetallic quasi-MOF (Q-MOF_Ce0.5 ) among three series of MOF-derived peroxidase (POD) mimics. The biomimetic quasi-MOF_Ce0.5 nanosheets accommodate both oxygen vacancy-coupled multivalent redox cycles and photosensitive energy band layout, benefiting from the hierarchical heterojunction-like 0D/2D interface featuring isolated nodes-derived CeOCu sites upon the 2D decarboxylated MOF scaffold. These integrated unique merits enable the POD-like Q-MOF_Ce0.5 to generate sustained reactive oxygen species to effectively eradicate the surface-adhered bacteria under visible light, resulting in significant inactivation of Escherichia coli (99.74 %) and Staphylococcus aureus (99.35%) in vitro, and potent disinfection of skin wounds in vivo in safe and on-demand manners. It is hoped that this work can intensify the interventions of MOF nanozymes against the microbial world.

Interfacing metal-polyphenolic networks upon photothermal gold nanorods for triplex-evolved biocompatible bactericidal activity

Gold nanorods (GNRs) outstand in photothermal disinfection but are faced with severe surface chemistry and dose relevant biotoxicity. Herein, a naturally green building block, metal-phenolic networks (MPNs), was employed to functionalize GNRs via coordination reaction, yielding a tunable and biocompatible core-shell photothermal nano-bactericide (GNRs@MPNs). The bioactive GNRs@MPNs built with iron and polyphenols (tannic acid, epigallocatechin gallate, and procyanidins) exhibited superior light-to-heat conversion efficiencies with η = 29.29-44.00%, remarkably preceding that of GNRs (η = 12.24%), which could rapidly ablate 99.8% of Escherichia coli O157: H7 and 98.6% of Staphylococcus aureus bacteria in relatively low efficacy doses (10 ppm of Au). Moreover, local heat triggered by GNRs@MPNs accelerated the healing of the cutaneous wound of a mice model infected by methicillin-resistant S. aureus. The facile synthesis, photothermal synergy, polyphenolic bioactivity, and significantly low efficacy dose of GNRs@MPNs empower them satisfactory efficiency and biosafety in the future broad-spectrum photothermal sterilization applications.

Ti3C2Tx MXenes loaded with Au nanoparticle dimers as a surface-enhanced Raman scattering aptasensor for AFB1 detection

Mycotoxin B1 (AFB1) contamination in agricultural products pose a deadlydangertoanimal and human health and its rapid and reliable detection is thus very important. Herein, a ratiometric surface-enhanced Raman scattering (SERS) aptasensor for AFB1 detection was developed, in which 1,2-bis(4-pyridyl) ethylene (BPE) was used to trigger the assembly of Au nanoparticle dimers (AuNP dimers) and form intensive SERS "hot spots", and MXenes nanosheets could load aptamer-modified AuNP dimers due to the hydrogen bonding and the chelation between the phosphate groups of aptamers and the Ti ion of MXenes. With the presence of AFB1 preferentially binding to AFB1 aptamer, AuNP dimers were separated from MXenes nanosheets, leading to a decrease in SERS intensity. Regression analysis in the range from 0.001 to 100 ng·mL^-1 showed the limit of detection (LOD) being 0.6 pg·mL^-1 in standard solution, indicating that the great prospects of the AuNP dimers/MXenes SERS substrate for detecting AFB1.

Three-dimensional surface-enhanced Raman scattering substrates constructed by integrating template-assisted electrodeposition and post-growth of silver nanoparticles

Three-dimensional (3D) plasmonic nano-arrays can provide high surface-enhanced Raman scattering (SERS) sensitivity, good spectral uniformity and excellent reproducibility. However, it is still a challenge to develop a simple and efficient method for fabrication of 3D plasmonic nano-arrays with high SERS performance. Here we report a facile approach to construct ordered arrays of silver (Ag) nanoparticles-assembled spherical micro-cavities using polystyrene (PS) sphere template-assisted electrodeposition and post-growth. The electrodeposited small Ag nanoparticles grow into bigger stable nanoparticles during the post-growth process, which could significantly improve the SERS sensitivity. The Ag nanoparticles-assembled 3D micro-cavity array provides much more hotspots in the excitation laser beam-covered volume than the two-dimensional counterpart. The relative standard deviation (RSD) of 612 cm^-1 peak of rhodamine 6G (R6G) was calculated to be 8%, and the RSD of the characteristic peak taken from substrates of different batches was less than 10%. The detectable lower concentration as low as 1 fM was achieved for an aqueous solution of R6G. Such SERS substrate also showed high sensitivity to thiram (fungicide) and paraquat (herbicide) in water with limits of detection of 0.067 nM and 2.5 nM respectively. Furthermore, it also demonstrated that SERS detection of pesticide residues on fruits can be realized, showing a potential application in rapid monitoring food safety.