Nuomici-Inspired Universal Strategy for Boosting Piezoresistive Sensitivity and Elasticity of Polymer Nanocomposite-Based Strain Sensors

Improvement of the Piezoresistive Behavior of Poly (vinylidene fluoride)/Carbon Nanotube Composites by the Addition of Inorganic Semiconductor Nanoparticles

Conductive polymer composites (CPCs), obtained by incorporating conductive fillers into a polymer matrix, are suitable for producing strain sensors for structural health monitoring (SHM) in infrastructure. Here, the effect of the addition of inorganic semiconductor nanoparticles (INPs) to a poly (vinylidene fluoride) (PVDF) composite filled with multi-walled carbon nanotubes (MWCNTs) on the piezoresistive behavior is investigated. INPs with different morphologies and sizes are synthesized by a hydrothermal method. The added inorganic oxide semiconductors showed two distinct morphologies, including different phases. While particles with flower-like plate morphology contain phases of orth-ZnSnO3 and SnO, the cauliflower-like nanoparticles contain these metal oxides and ZnO. The nanoparticles are characterized by field-emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD), and the nanocomposites by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Cyclic tensile testing is applied to determine the strain-sensing behavior of PVDF/1 wt% MWCNT nanocomposites with 0-10 wt% inorganic nanoparticles. Compared to the PVDF/1 wt% MWCNT nanocomposite, the piezoresistive sensitivity is higher after the addition of both types of nanoparticles and increases with their amount. Thereby, nanoparticles with flower-like plate structures improve strain sensing behavior slightly more than nanoparticles with cauliflower-like structures. The thermogravimetric analysis results showed that the morphology of the semiconductor nanoparticles added to the PVDF/MWCNT matrix influences the changes in thermal properties.

Reconfigurable, Stretchable Strain Sensor with the Localized Controlling of Substrate Modulus by Two-Phase Liquid Metal Cells

Strain modulation based on the heterogeneous design of soft substrates is an effective method to improve the sensitivity of stretchable resistive strain sensors. In this study, a novel design for reconfigurable strain modulation in the soft substrate with two-phase liquid cells is proposed. The modulatory strain distribution induced by the reversible phase transition of the liquid metal provides reconfigurable strain sensing capabilities with multiple combinations of operating range and sensitivity. The effectiveness of our strategy is validated by theoretical simulations and experiments on a hybrid carbonous film-based resistive strain sensor. The strain sensor can be gradually switched between a highly sensitive one and a wide-range one by selectively controlling the phases of liquid metal in the cell array with a external heating source. The relative change of sensitivity and operating range reaches a maximum of 59% and 44%, respectively. This reversible heterogeneous design shows great potential to facilitate the fabrication of strain sensors and might play a promising role in the future applications of stretchable strain sensors.

Highly Tunable Piezoresistive Behavior of Carbon Nanotube-Containing Conductive Polymer Blend Composites Prepared from Two Polymers Exhibiting Crystallization-Induced Phase Separation

Conductive polymer composites (CPCs) are suitable as piezoresistive-sensing materials. When using CPCs for strain sensing, it is still a big challenge to simultaneously improve the piezoresistive sensitivity and linearity along with the electrical conductivity and mechanical properties. Here, highly tunable piezoresistive behavior is reported for multiwalled carbon nanotube (CNT)-filled CPCs based on blends of two semicrystalline polymers poly(vinylidene fluoride) (PVDF) and poly(butylene succinate) (PBS), which are miscible in the melt. When cooling the homogeneous mixture of the blend components, successive crystallization of PVDF and PBS occurs, creating complex crystalline structures in a mixed amorphous phase. The morphology of the blend matrix, the crystallinity of the blend components, and the dispersion and location of the CNTs in the blend depend on the CNT content and the blend composition. Compared with PVDF/CNT composites, the substitution of 10 to 50 wt % PVDF by PBS in the composites shifts the electrical percolation concentration Φ_c from 0.79 wt % to filler contents as low as 0.50 wt % while improving the stretchability. The piezoresistive behavior is highly tunable by changing the PVDF/PBS ratio. The ternary composites with matrix compositions of PVDF (90 wt %)/PBS (10 wt %) and PVDF (50 wt %)/PBS (50 wt %) show either higher piezoresistive sensitivity or linearity, respectively, caused by the differences in the microstructure of the CPCs. For example, the crystallinity of PBS in the ternary composites increased from 19.8% to 52.0% as the PBS content increased from 10 wt % to 50 wt %, which is connected with altered CNT distribution and conductive network structure and substantial improvement of the linearity of the electrical response to strains up to >20%. Our findings highly contribute to the understanding of the piezoresistive properties of CPCs based on two semicrystalline polymers and are important for future studies to tune the piezoresistive behavior to achieve simultaneously improved sensitivity and linearity.

Tuning the Piezoresistive Behavior of Poly(Vinylidene Fluoride)/Carbon Nanotube Composites Using Poly(Methyl Methacrylate)

In conductive polymer composites (CPCs), which can be used as both strain sensors and materials with self-diagnosis capabilities for structural health monitoring, the piezoresistive sensitivity can be tuned by changing the electrical filler network structure, mainly influenced by the conductive filler content. Typically, the electrical resistance increases exponentially with strain, and the piezoresistive sensitivity and linearity cannot be improved simultaneously. In this work, we report a facile method to tune the piezoresistive behavior of melt-mixed poly(vinylidene fluoride) (PVDF)/carbon nanotube (CNT, 0.75-2.0 wt %) composites using blending with poly(methyl methacrylate) (PMMA, 5-30 wt %). PVDF and PMMA are completely miscible in the melt state regardless of the proportion. For PVDF-rich blends, the crystallization of PVDF induces separation of the PVDF crystal region from the miscible PVDF/PMMA amorphous blend part during the cooling process. Addition of PMMA tuned the piezoresistive strain behavior and improved the electrical conductivity and toughness at the same time. The PVDF/PMMA/CNT composites show higher sensitivity at low strains than their PVDF/CNT counterparts with comparable initial resistivity. For example, ΔR/R₀ at 5% strain is 18.6% for the PVDF(80)/PMMA(20) blend containing 0.75 wt % CNT versus 11.0% for PVDF containing 1 wt % CNT, both having a volume resistivity of around 10⁴ Ω·cm. The PVDF/PMMA/CNT blend composites also show a less steep exponential increase in the sensing response at higher strains, indicating better linearity. These differences are due to the altered microstructure of the composites and the more homogeneous distribution of CNTs between the smaller and less numerous PVDF crystallites when PMMA is added. The concept of modifying the composite microstructure by adding another commercially available miscible polymer offers a simple and effective way to tune the piezoresistive behavior and improve mechanical properties of CPC sensor materials.