Novel Lignin-Cellulose-Based Carbon Nanofibers as High-Performance Supercapacitors

Acid-modified biomass-based N-doped O-rich hierarchical porous carbon as a high-performance electrode for supercapacitors

In contemporary society, the conversion and efficient utilization of waste biomass and its derivatives are of great significance. Carbonized wood (CW) is an easily accessible and cost-effective green resource, but it has limitations as an electrode material due to its low specific surface area, limited active sites and poor conductivity. Therefore, it is crucial to improve the performance of biomass-based materials by using activation, heteroatom doping and modification methods to enhance the specific surface area and active sites. In this study, we developed acid-modified urea-doped activated carbonized wood (AUACW) with a three-dimensional (3D) porous structure and porosity, achieving a high specific surface area of 1321.3 m2 g-1. In addition, the degree of graphitization (ID/IG = 1.0) provides good conductivity and a large number of active sites, which are conducive to charge transfer and ion diffusion. The increase of nitrogen and oxygen elements enhances the surface wettability of the material and provides additional pseudocapacitance. The specific capacitance of AUACW reaches 435.84 F g-1 at 0.8 A g-1 with a 93.6% capacitance retention after 10 000 cycles in a 1 M KOH electrolyte. More attractively, a symmetrical supercapacitor (SSC) based on AUACW delivers an energy density of 22.61 W h kg-1 at a power density of 533.26 W kg-1. This work demonstrates the promising potential of utilizing waste biomass to develop green and valuable carbon materials for supercapacitors.

Ni Single Atom Decorated Porous Hollow Carbon Nanosphere-Based Electrodes for High Performance Symmetric Solid-State Supercapacitors

Ni single atom containing hollow carbon nanospheres with nitrogen doping has been synthesized by carbonization of Ni(NO3)2/phloroglucinol-formaldehyde polymer/silica composite. The samples have been characterized by powder X-ray diffraction, nitrogen adsorption/desorption, electron microscopic, Raman and X-ray photoelectron spectroscopic studies. The microstructure and surface area vary with the amount of Ni(NO3)2 employed in the syntheses and the carbonization environment. An optimized amount of nickel and argon as the carbonization gas afford Ni-1.0@N@HCN-Ar which possesses overall superior features. The uniformly dispersed Ni single atoms within the hollow porous carbon framework fully utilize all the electroactive sites thereby improving the supercapacitive performance. The specific capacitance of Ni-1.0@N@HCN-Ar reaches 777 F g-1 at 1 A g-1 with a Coulombic efficiency of 98.4 % and excellent recyclability. The energy and power density of Ni-1.0@N@HCN-Ar are found to be high; at 1 A g-1 its energy density is 155.4 Wh kg-1 with a power density of 600.3 W kg-1. At a high current density of 10 A g-1 the material shows a high energy density of 118.4 Wh kg-1 with excellent power density of 6003.4 W kg-1. A symmetric solid-state supercapacitor assembled with this material, Ni-1.0@N@HCN-Ar//Ni-1.0@N@HCN-Ar using H2SO4/PVA gel electrolyte shows a superior energy density value of 30 Wh kg-1 at a power density of 1200 W kg-1.

A novel salt-barrier method of preparation flexible temperature resistant full-component nanocellulose membranes

With the simplification and diversification of separation technologies, nanocellulose membranes have become widely used as insulating materials. Recently, study of nanocellulose membrane modification has become a hot topic. However, the application of nanocellulose membrane has been limited due to their inadequate heat resistance and flexibility. Herein, based on the pyrolytic and thermoplastic properties of cellulose, we innovatively introduced a salt barrier scheme to regulate the degree of hydrogen bonding and thermoplastic bonding between fibers. This was achieved by adding a salt barrier agent, NaCl, in the middle of the nanocellulose to prepare and obtain flexible, high-temperature-resistant nanocellulose film materials. The full-component cellulose films thus prepared exhibited high tensile strength (8 MPa), excellent flexibility (105 mN), high electrical breakdown strength (67 KV/mm), and volume resistivity meeting the standard of insulation materials (3.23 × 1013 Ω·m). This scheme adheres to the principles of low cost, green, non-toxic and non-hazardous, providing a brand new approach for the research and development of high temperature resistant cellulose membrane materials, which is of significant commercial value and industrialization prospect.

Recent advances in biopolymers-based carbon materials for supercapacitors

Supercapacitors as potential candidates for novel green energy storage devices demonstrate a promising future in promoting sustainable energy supply, but their development is impeded by limited energy density, which can be addressed by developing high-capacitance electrode materials with efforts. Carbon materials derived from biopolymers have received much attention for their abundant reserves and environmentally sustainable nature, rendering them ideal for supercapacitor electrodes. However, the limited capacitance has hindered their widespread application, resulting in the proposal of various strategies to enhance the capacity properties of carbon electrodes. This paper critically reviewed the recent research progress of biopolymers-based carbon electrodes. The advances in biopolymers-based carbon electrodes for supercapacitors are presented, followed by the strategies to improve the capacitance of carbon electrodes which include pore engineering, doping engineering and composite engineering. Furthermore, this review is summarized and the challenges of biopolymer-derived carbon electrodes are discussed. The purpose of this review is to promote the widespread application of biopolymers in the domain of supercapacitors.

Preparation and characterization of bifunctional wolfsbane-like magnetic Fe3O4 nanoparticles-decorated lignin-based carbon nanofibers composites for electromagnetic wave absorption and electrochemical energy storage

Recently, with the pursuit of high-efficiency electromagnetic wave absorption (EMWA) and electrochemical energy storage (EES) materials, multifunctional lignin-based composites have attracted significant interest due to their low cost, vast availability, and sustainability. In this work, lignin-based carbon nanofibers (LCNFs) was first prepared by electrospinning, pre-oxidation and carbonization processes. Then, different content of magnetic Fe3O4 nanoparticles were deposited on the surface of LCNFs via the facile hydrothermal way to produce a series of bifunctional wolfsbane-like LCNFs/Fe3O4 composites. Among them, the synthesized optimal sample (using 12 mmol of FeCl3·6H2O named as LCNFs/Fe3O4-2) displayed excellent EMWA ability. When the minimum reflection loss (RL) value achieved -44.98 dB at 6.01 GHz with an thickness of 1.5 mm, and the effective absorption bandwidth (EAB) was up to 4.19 GHz ranging from 5.10 to 7.21 GHz. For supercapacitor electrode, the highest specific capacitance of LCNFs/Fe3O4-2 reached 538.7 F/g at the current density of 1 A/g, and the capacitance retention remained at 80.3 %. Moreover, an electric double layer capacitor of LCNFs/Fe3O4-2//LCNFs/Fe3O4-2 also showed a remarkable power density of 7755.29 W/kg, outstanding energy density of 36.62 Wh/kg and high cycle stability (96.89 % after 5000 cycles). In short, the construction of this multifunctional lignin-based composites has potential applications in electromagnetic wave (EMW) absorbers and supercapacitor electrodes.

A universal approach for producing lignin-based monocomponent fiber by one-step ethanol fractionation

To achieve sustainable whole process of carbon-fiber production and high-value utilization of lignin, one-step ethanol fractionation followed by coaxial electrospinning was applied to produce lignin-based monocomponent carbon-fiber. To elucidate the mechanism, hydrothermal extracted poplar lignin (HPL) were obtained to be divide into two parts through ethanol fractionation, in which the ethanol-soluble lignin (ESL) was eletrcospun into fiber precursors. Then, to verify the universality of this method, four more lignin were extracted to produce fiber precursors, after which five kinds of carbon fibers were prepared by carbonization of the corresponding precursors. Structural analysis showed that ESL of HPL is a small and highly branched three-dimensional stereomolecules. Combined with the SEM results of fiber precursors, the mechanism which hydrogen bonding promotes fiber formation was elucidated. Among all five samples, carbon-fiber prepared from HPL possesses the minimum fiber diameter of 557 nm, the smallest interplanar spacing of 0.3909 nm, ID/IG value of 0.6345 and the largest specific surface area of 408.15 m²/g. This work proposes a universal method to prepare lignin-based monocomponent carbon-fiber, in which carbon-fibers prepared from HPL exhibits the best comprehensive performance and can be applied to capture radioactive iodine.

Fabrication of Graphitized Carbon Fibers from Fusible Lignin and Their Application in Supercapacitors

Lignin-based carbon fibers (LCFs) with graphitized structures decorated on their surfaces were successfully prepared using the simultaneous catalyst loading and chemical stabilization of melt-spun lignin fibers, followed by quick carbonization functionalized as catalytic graphitization. This technique not only enables surficial graphitized LCF preparation at a relatively low temperature of 1200 °C but also avoids additional treatments used in conventional carbon fiber production. The LCFs were then used as electrode materials in a supercapacitor assembly. Electrochemical measurements confirmed that LCF-0.4, a sample with a relatively low specific surface area of 89.9 m2 g-1, exhibited the best electrochemical properties. The supercapacitor with LCF-0.4 had a specific capacitance of 10.7 F g-1 at 0.5 A g-1, a power density of 869.5 W kg-1, an energy density of 15.7 Wh kg-1, and a capacitance retention of 100% after 1500 cycles, even without activation.

NiCo2S4 combined 3D hierarchical porous carbon derived from lignin for high-performance supercapacitors

Metal sulfides with the nature of low electronegativity and high electrochemical activity are potentially considered effective electrode materials for supercapacitors. Meanwhile, hierarchical porous carbon (HPC) materials derived from eco-friendly enzymatic hydrolysis lignin are the ideal matrix for holding nanoparticles (NP) that allows the overall NP/HPC composite to achieve outstanding electrochemical performance. In this study, NiCo₂S₄ nanoparticles were in-situ synthesized on the inner surface of 3D HPC that derived from enzymatic hydrolysis lignin with a simple one-step solvothermal method, thus forming a high-performance composite electrode material for supercapacitor applications. As a result, the NiCo₂S₄/HPC composite yields an outstanding specific capacity of 1264.2 F g^-1 at 1 A g^-1 and also exhibits remarkable rate performance. Such remarkable property is attributed to the effective combination of NiCo₂S₄ plus HPC and their strong chemical bonds, which enable excellent electronic conductivity and abundant exposed electroactive sites. The asymmetric supercapacitor assembled by utilizing NiCo₂S₄/HPC and active carbon as the positive and negative electrodes, respectively, provide an excellent energy density of 32.05 Wh kg^-1 at a power density of 193.9 W kg^-1. This work puts forward a practical optimization strategy for metal sulfides used in electrochemical energy storage devices.

Recent advancements in lignocellulose biomass-based carbon fiber: Synthesis, properties, and applications

A growing need to reduce the global carbon footprint has prompted all sectors to make significant efforts in this direction. For example, there has been much focus on green carbon fiber sustainability. For example, it was found that the polyaromatic heteropolymer lignin might act as an intermediary in synthesising carbon fiber. Biomass is seen as a potential carbon accommodated solid natural sources that protects the nature and has a big overall supply and widespread distribution. With growing environmental concern in recent years, biomass has gained appeal as a raw material for production of carbon fibers. Especially, the positives of lignin material include its reasonable budget, sustainability, and higher carbon content, which makes it a dominating precursor. This review has examined a variety of bio precursors that help produce lignin and have higher lignin concentrations. In addition, there has been much research on plant sources, lignin types, factors affecting carbon fiber synthesis, spinning methods, stabilization, carbonization, and activation the characterisation techniques used for the lignin carbon fiber to comprehend the structure and features. In addition, an overview of the applications that use lignin carbon fiber has been provided.

Recent advances in cellulose supported photocatalysis for pollutant mitigation: A review

In recent times, green chemistry or "green world" is a new and effective approach for sustainable environmental remediation. Among all biomaterials, cellulose is a vital material in research and green chemistry. Cellulose is the most commonly used natural biopolymer because of its distinctive and exceptional properties such as reproducibility, cost-effectiveness, biocompatibility, biodegradability, and universality. Generally, coupling cellulose with other nanocomposite materials enhances the properties like porosity and specific surface area. The polymer is environment-friendly, bioresorbable, and sustainable which not only justifies the requirements of a good photocatalyst but boosts the adsorption ability and degradation efficiency of the nanocomposite. Hence, knowing the role of cellulose to enhance photocatalytic activity, the present review is focused on the properties of cellulose and its application in antibiotics, textile dyes, phenol and Cr(VI) reduction, and degradation. The work also highlighted the degradation mechanism of cellulose-based photocatalysts, confirming cellulose's role as a support material to act as a sink and electron mediator, suppressing the charge carrier's recombination rate and enhancing the charge migration ability. The review also covers the latest progressions, leanings, and challenges of cellulose biomaterials-based nanocomposites in the photocatalysis field.

Molecular Modification of Lignin-Based Carbon Materials: Influence of Supramolecular Bonds on the Properties

For the application of lignin-based materials, it is necessary to develop simple and efficient chemical modification strategies for lignin. In this work, the iodization modification strategy is selected to improve the specific surface area and graphitization degree of lignin-based carbon fibers. The introduction of an iodine atom can effectively increase the π electron cloud density of the lignin aromatic hydrocarbon structure. High π electron cloud density can effectively enhance the π-π interaction force between lignin molecules (the supramolecular bonds). The biomass precursors with this intermolecular microstructure exhibit good thermal stability and can maintain the original fibrous morphology during high-temperature treatment, which is beneficial for increasing the specific surface area of biomass-based carbon materials. Furthermore, this intermolecular microstructure also contributes to the graphitization of biomass precursor materials and reduces the spacing of graphite micro-lamellae. The obtained lignin-based carbon fibers with iodization modification exhibit a specific capacitance of 333 F/g at a current density of 1 A/g in the three-electrode tests in 6 M KOH solution. As the assembled supercapacitor, the specific capacitance of lignin-based carbon fibers reaches 87 F/g in 1 M Na₂SO₄ solution. Compared to other modification processes for raw materials, this strategy is simple and efficient and has reference value for the synthesis of other high-performance biomass-based materials.

Recent advances in lignin-based carbon materials and their applications: A review

As the most abundant natural aromatic polymer, tens of million of tons of lignin produced in paper-making or biorefinery industry are used as fuel annually, which is a low-value utilization. Moreover, burning lignin results in large amounts of carbon dioxide and pollutants in the air. The potential of lignin is far from being fully exploited and the search for high value-added application of lignin is highly pursued. Because of the high carbon content of lignin, converting lignin into advanced carbon-based structural or functional materials is regarded as one of the most promising solutions for both environmental protection and utilization of renewable resources. Significant progresses in lignin-based carbon materials (LCMs) including porous carbon, activated carbon, carbon fiber, carbon aerogel, nanostructured carbon, etc., for various valued applications have been witnessed in recent years. Here, this review summarized the recent advances in LCMs from the perspectives of preparation, structure, and applications. In particular, this review attempts to figure out the intrinsic relationship between the structure and functionalities of LCMs from their recent applications. Hopefully, some thoughts and discussions on the structure-property relationship of LCMs can inspire researchers to stride over the present barriers in the preparation and applications of LCMs.

Biopolymer-based electrospun fibers in electrochemical devices: versatile platform for energy, environment, and health monitoring

Electrochemical power tools are regarded as essential keys in a world that is becoming increasingly reliant on fossil fuels in order to meet the challenges of rapidly depleting fossil fuel supplies. Additionally, due to the industrialization of societies and the growth of diseases, the need for sensitive, reliable, inexpensive, and portable sensors and biosensors for noninvasive monitoring of human health and environmental pollution is felt more than ever before. In recent decades, electrospun fibers have emerged as promising candidates for the fabrication of highly efficient electrochemical devices, such as actuators, batteries, fuel cells, supercapacitors, and biosensors. Meanwhile, the use of synthetic polymers in the fabrication of versatile electrochemical devices has raised environmental concerns, leading to an increase in the quest for natural polymers. Natural polymers are primarily derived from microorganisms and plants. Despite the challenges of processing bio-based electrospun fibers, employing natural nanofibers in the fabrication of electrochemical devices has garnered tremendous attention in recent years. Here, various natural polymers and the strategies employed to fabricate various electrospun biopolymers are briefly covered. The recent advances and research strategies used to apply the bio-based electrospun membranes in different electrochemical devices are carefully summarized, along with the scopes in various advanced technologies. A comprehensive and critical discussion about the use of biopolymer-based electrospun fibers as the potential alternative to non-renewable ones in future technologies is briefly highlighted. This review will serve as a field opening platform for using different biopolymer-based electrospun fibers to advance the electrochemical device-based renewable and sustainable technologies, which will be of high interest to a large community. Accordingly, future studies should focus on feasible and cost-effective extraction of biopolymers from natural resources as well as fabrication of high-performance nanofibrous biopolymer-based components applicable in various electrochemical devices.

Supramolecular Hydrogel Dressing: Effect of Lignin on the Self-Healing, Antibacterial, Antioxidant, and Biological Activity Improvement

The functionalization and performance improvement of supramolecular hydrogels are very important for their application in the wound dressing field. Inspired by the role of lignin in plant cell walls, sulfonated lignin is introduced into the supramolecular hydrogel to improve functionality, mechanical strength, and biological activity. According to the chemical structure characteristics of the sulfonated lignin and the requirements for wound dressing, a novel polymer system is designed and successfully synthesized to cooperate with the sulfonated lignin to form the supramolecular hydrogel dressings. The introduction of the sulfonated lignin can effectively improve the mechanical strength, self-healing property, antioxidant activity, and biological activity of the obtained supramolecular hydrogel dressings. In the rat wound healing model experiment, the supramolecular hydrogel dressings can maintain the moist environment on the wound surface, clean up the excretion of wound tissue, promote wound healing, and reduce the occurrence of inflammation. This supramolecular hydrogel dressing shows obvious potential for wound management and treatment by a facile and effective approach and has great promise for long-term application of wound dressings. This strategy for designing polymers according to the chemical structure characteristics of the sulfonated lignin and the application requirements has reference value for further development of biomass-based compound materials.

Carbon nanofibers derived from cellulose via molten-salt method as supercapacitor electrode

Carbon nanofibers (CNFs) have been paid much attention as supercapacitor electrode due to outstanding chemical stability, high electron transfer rate and large specific surface area. However, the preparation process of CNFs is always stalemated in electrospinning, heat stabilization and carbonization. The problems of solvent pollution in the electrospinning process, complex process and high energy consumption in conventional carbonization process can't be solved. Herein, CNFs have been innovatively prepared from nanofibrillated cellulose by the molten-salt method (NaCl/NaOH). Molten salt penetrates between the fibers, separates and activates the fibers. The obtained carbon nanofibers remain developed branching structures and have a large specific surface area (899 m² g^-1). The electrical properties are tested in a symmetrical two-electrode system. The specific capacitance is 150 F g^-1 at the current density of 1 A g^-1. Low equivalent series resistance (1.13 Ω) indicates that it has high electrode conductivity. This study has taken into account energy conservation, environmental protection, recyclability and simplified preparation process, which has a very far-reaching significance for the industrial production of CNFs.

Recent advances in the hybridization of cellulose and carbon nanomaterials: Interactions, structural design, functional tailoring, and applications

Due to the good biocompatibility and flexibility of cellulose and the excellent optical, electronic, as well as mechanical properties of carbon nanomaterials (CNMs), cellulose/CNM hybrid materials have been widely synthesized and used in energy storage, sensors, adsorption, biomedicine, and many other fields. In this review, we present recent advances (2016-current) in the design, structural design, functional tailoring and various applications of cellulose/CNM hybrid materials. For this aim, first the interactions between cellulose and CNMs for promoting the formation of cellulose/CNM materials are analyzed, and then the hybridization between cellulose with various CNMs for tailoring the structures and functions of hybrid materials is introduced. Further, abundant applications of cellulose/CNM hybrid materials in various fields are presented and discussed. This comprehensive review will be helpful for readers to understand the functional design and facile synthesis of cellulose-based nanocomposites, and to promote the high-performance utilization and sustainability of biomass materials in the future.

Multifunction lignin-based carbon nanofibers with enhanced electromagnetic wave absorption and surpercapacitive energy storage capabilities

It is difficult for green sustainable lignin-based materials to simultaneously obtain efficient electromagnetic wave absorption (EMWA) and supercapacitive energy storage (SCES), which has not yet been reported. Herein, the light-weight lignin-based carbon nanofibers (LCNFs) with proper pore size, well graphitization degree, and heteroatom doping were tailored through electrospinning and carbonization processes. Interestingly, the graphitization degree and porous structure of LCNFs could be easily adjusted by changing the activating temperature, and the higher conductivity was achieved for preparing LCNFs at higher activating temperature due to the differences in the crystal size and activating degree of LCNFs. As a result, in the field of EMWA, the LCNFs-950 exhibited the minimum reflection loss (RL) value was -41.4 dB and the absorbing frequency was 9.05 GHz at 2.5 mm thickness, which meant this absorbent could absorb and/or dissipate more than 99.9% of incident electromagnetic wave (EMW). Furthermore, the LCNFs-950 also exhibited excellent SCES ability. In two-electrode system, the optimal LCNFs-950 symmetric supercapacitor specific capacitance reached 139.4 F/g at a current density of 0.5 A/g, meanwhile, the energy density was 41.4 Wh/kg at a power density of 3500 W/Kg. These multifunctional features of LCNFs will be highly promising for the next-generation environmental remediating materials.

Lignin-Based/Polypyrrole Carbon Nanofiber Electrode With Enhanced Electrochemical Properties by Electrospun Method

Tailoring the structure and properties of lignin is an important step toward electrochemical applications. In this study, lignin/polypyrrole (PPy) composite electrode films with microporous and mesoporous structures were designed effectively by electrostatic spinning, carbonization, and in situ polymerization methods. The lignin can not only reduce the cost of carbon fiber but also increase the specific surface area of composite films due to the removal of carbonyl and phenolic functional groups of lignin during carbonization. Besides, the compact three-dimensional (3D) conductive network structures were constructed with PPy particles densely coated on the lignin nanofibers, which was helpful to improve the conductivity and fast electron transfer during the charging and discharging processes. The synthesized lignin carbon fibers/PPy anode materials had good electrochemical performance in 1 M H2SO4 electrolyte. The results showed that, at a current density of 1 A g−1, the lignin carbon nanofibers/PPy (LCNFs/PPy) had a larger specific capacitance of 213.7 F g−1 than carbon nanofibers (CNFs), lignin carbon nanofibers (LCNFs), and lignin/PPy fiber (LPAN/PPy). In addition, the specific surface area of LCNFs/PPy reached 872.60 m2 g−1 and the average pore size decreased to 2.50 nm after being coated by PPy. Therefore, the independent non-binder and self-supporting conductive film is expected to be a promising electrode material for supercapacitors with high performance.

Cellulose nanofiber derived carbon aerogel with 3D multiscale pore architecture for high-performance supercapacitors

Carbon materials are highly promising electrode materials for supercapacitors, due to their hierarchical porous structure and large specific surface area. However, the limited specific capacitance and inferior rate capability significantly prevent their practical application. Herein, 3D interconnected hierarchical porous carbon aerogels (CNFAs) through engineering the pyrolysis chemistry of CNF are developed. The obtained CNFAs effectively improve the carbon yield and suppress the volume shrinkage, as well as have robust mechanical properties. As a supercapacitor electrode, the CNFAs-17% electrode exhibits an ultrahigh capacitance of 440.29 F g^-1 at 1 A g^-1, significantly superior to most reported biomass-based carbon materials. Moreover, the CNFAs-17% assembled symmetric supercapacitor (SSC) achieves an outstanding rate capability (63.29% at 10 mA cm^-2), high areal energy density (0.081 mWh cm^-2), and remarkable cycling stability (nearly 100% capacitance retention after 7000 cycles). This work offers a simple, effective strategy towards the preparation of promising electrode materials for high-performance energy storage applications.

Nanomaterial conjugated lignocellulosic waste: cost-effective production of sustainable bioenergy using enzymes

The demand for novel and renewable sources of energy has increased as a result of rapid population growth, limited sources of bioenergy, and environmental pollution, caused by excessive use of fossil fuels. The need to meet future energy demands have motivated researchers to search for alternative and sustainable sources of energy. The bioconversion of lignocellulosic waste (agricultural and food waste) into biofuels shows competitive promises. Lignocellulosic waste is easily accessible and has a large enzyme system that can be immobilised onto nano-matrices. Consequently, resulting in higher biofuel production and process efficiency. However, the excessive production cost of the current procedures, which involve physical, chemical, and enzymatic reactions, is limited. The use of nanomaterials has recently been shown to concentrate lignocellulosic waste, therefore, reviewing the quest for efficient production of sustainable and cost-effective development of bioenergy from lignocellulosic wastes. This review paper explores the advanced strategies of using nanobiotechnology to combine enzyme-conjugated nanosystems for the cost-effective production of sustainable bioenergy solutions. This research will help to develop an inexpensive, eco-friendly technology for biofuels production and also help overcome the environmental burden of lignocellulosic waste worldwide.

Lignin Derived Porous Carbons: Synthesis Methods and Supercapacitor Applications

Lignin, one of the renewable constituents in natural plant biomasses, holds great potential as a sustainable source of functional carbon materials. Tremendous research efforts have been made on lignin-derived carbon electrodes for rechargeable batteries. However, lignin is considered as one of the most promising carbon precursors for the development of high-performance, low-cost porous carbon electrode materials for supercapacitor applications. Yet, these efforts have not been reviewed in detail in the current literature. This review, therefore, offers a basis for the utilization of lignin as a pivotal precursor for the synthesis of porous carbons for use in supercapacitor electrode applications. Lignin chemistry, the synthesis process of lignin-derived porous carbons, and future directions for developing better porous carbon electrode materials from lignin are systematically reviewed. Technological hurdles and approaches that should be prioritized in future research are presented.

Recent progress in cellulose-based electrospun nanofibers as multifunctional materials

Cellulose, the most abundant natural polymer, has good biocompatibility, biodegradability, and non-toxicity, which make it and its derivatives promising candidates for the fabrication of multifunctional materials, while maintaining sustainability and environmental friendliness. The combination of electrospinning technology and cellulose (and its derivatives) provides a feasible approach to produce nanostructured porous materials with promising functionalities, flexibility, renewability and biodegradability. At the same time, it enables value-added applications of cellulose and its derivatives that are derived from nature or even biomass waste. This review summarizes and discusses the latest progress in cellulose-based electrospun nanofibers, including their construction methods and conditions, various available raw materials, and applications in multiple areas (water treatment, biomaterials, sensors, electro-conductive materials, active packaging, and so on), which are followed by the conclusion and prospects associated with future opportunities and challenges in this active research area.

Bioinspired Camellia japonica carbon dots with high near-infrared absorbance for efficient photothermal cancer therapy

Since carbon dots (CDs) exhibit excellent biocompatibility, low cytotoxicity, near-infrared (NIR) absorbance, and superior photostability, many types of CDs are considered as powerful candidates for photothermal therapy (PTT) applications. However, the development of a desirable CD is still difficult due to insufficient photothermal conversion, thus resulting in the use of high laser power densities at a high dose of CDs for the PTT effect. Herein, bioinspired sulfur-doped CDs (S-CDs) with strong NIR absorbance were prepared from Camellia japonica flowers via a facile hydrothermal method for enhancing the photothermal conversion efficiency. The as-prepared S-CDs exhibited various advantages including cost-effective preparation, good water-solubility, high biocompatibility, intense NIR absorption, and excellent photothermal effect with robust photostability. Most importantly, the optimal low dose of S-CDs (45 μg mL^-1) successfully led to efficient PTT performance with a high photothermal conversion efficiency (55.4%) under moderate laser power (808 nm, 1.1 W cm^-2) for safe and effective cancer therapy.

Lignocellulosic Biomass-Derived Carbon Electrodes for Flexible Supercapacitors: An Overview

With the increasing demand for high-performance electronic devices in smart textiles, various types of flexible/wearable electronic device (i.e., supercapacitors, batteries, fuel cells, etc.) have emerged regularly. As one of the most promising wearable devices, flexible supercapacitors from a variety of electrode materials have been developed. In particular, carbon materials from lignocellulosic biomass precursor have the characteristics of low cost, natural abundance, high specific surface area, excellent electrochemical stability, etc. Moreover, their chemical structures usually contain a large number of heteroatomic groups, which greatly contribute to the capacitive performance of the corresponding flexible supercapacitors. This review summarizes the working mechanism, configuration of flexible electrodes, conversion of lignocellulosic biomass-derived carbon electrodes, and their corresponding electrochemical properties in flexible/wearable supercapacitors. Technology challenges and future research trends will also be provided.

The Production of Carbon Nanofiber on Rubber Fruit Shell-Derived Activated Carbon by Chemical Activation and Hydrothermal Process with Low Temperature

Recently, the conversion of biomass into carbon nanofibers has been extensively studied. In this study, carbon nanofibers (CNFs) were prepared from rubber fruit shell (RFS) by chemical activation with H₃PO₄, followed by a simple hydrothermal process at low temperature and without a vacuum and gas catalyst. XRD and Raman studies show that the structure formed is an amorphous graphite formation. From the thermal analysis, it is shown that CNFs have a high thermal stability. Furthermore, an SEM/TEM analysis showed that CNFs’ morphology varied in size and thickness. The obtained results reveal that by converting RFS into an amorphous carbon through chemical activation and hydrothermal processes, RFS is considered a potential biomass source material to produce carbon nanofibers.

Effective fractionation strategy of sugarcane bagasse lignin to fabricate quality lignin-based carbon nanofibers supercapacitors

Lignin is recommended to a tempting alternative precursor of petroleum for fabricating carbon nanofibers (CNFs) due to its high carbon content, low-cost and renewable resources. However, the property of lignin-based carbon nanofibers (LCNFs) is inferior owing to the heterogeneity and 3D-network structure of lignin, which hinders its application in supercapacitors. The latest developments in fractionation technology have shown great potential for overcoming the aforementioned shortcomings. However, most of fractionation methods mainly rely on expensive chemicals and complex reaction process, such as enzymes, multiple solvents, membranes, and dialysis tubes. Herein, we proposed a controllable and effective strategy to fractionate lignin by only changing the ratio of ethanol/water (V/V) as mixture solvent. This gradient extraction method effectively removed the part of lignin with small molecular and branching structure, thus selectively getting the fractionated lignin with high molecular weight, narrow polydispersity index, and good linear structure. Fortunately, when the ratio of ethanol/water was 6:4, the corresponding LCNFs (LCNFs-L60) was obtained with large specific surface area, independent filamentous morphology networks and excellent electrochemical property. Its specific capacitance was up to 405.8 F/g. This way features controllable and sustainable for preparing high-quality LCNFs supercapacitors.

Nacre-inspired composite films with high mechanical strength constructed from MXenes and wood-inspired hydrothermal cellulose-based nanofibers for high performance flexible supercapacitors

Two dimensional MXenes with fascinating characteristics of high electrical conductivity, high density and electroactivity show promising applications in various fields. However, the direct applications of MXenes have been limited due to their inferior mechanical properties and easy restacking. Herein, a kind of nacre-like composite film constructed with Ti3C2Tx, cellulose nanofiber (HCNF) and sodium lignosulfonate (Lig) obtained through the hydrothermal process, named Ti3C2Tx/HCNF@Lig, has been successfully synthesized. The hydrothermal cellulose nanofiber (HCNF) film shows an enhanced mechanical strength (114 MPa) compared to that of the CNF film (95 MPa). Wood-inspired HCNF@Lig composite films present an enhanced mechanical tensile strength of up to 133 MPa. Nacre-like deformable Ti3C2Tx/HCNF@Lig(3@1) composite films exhibit high conductivity (up to 1.75 × 105 S m-1) and mechanical properties (up to 258 MPa). The electrodes of Ti3C2Tx/HCNF@Lig(3@1)97/3 composite film assembled flexible solid-state supercapacitors possess an excellent volumetric specific capacitance of 748.96 F cm-3. The corresponding deformable supercapacitors show an excellent energy density of 16.2 W h L-1 and outstanding electrochemical cycling stability. The as-prepared nacre-like Ti3C2Tx/HCNF@Lig composite films with high mechanical properties and electrochemical performance are expected to be practically applied in flexible/wearable energy storage devices.

Tuning structure of spent coffee ground lignin by temperature fractionation to improve lignin-based carbon nanofibers mechanical performance

Fabricating lignin-based carbon nanofibers (LCNFs) with the lignin in spent coffee grounds (SCG) as raw material which are disposed as waste amounting to millions tons annual is benefit to promote economy and environmental protection. However, due to the heterogeneity and complex three-dimensional structure, the mechanic property is very poor. In this study, we propose a fractionating pretreatment method to overcome the above problems by regulating the structure of SCG lignin in which high-performance LCNFs were fabricated. On one hand, the linear structure of SCG lignin was optimized to fit the raw material of LCNFs by tuning the content of β-O-4 and C₅-substituted condensed phenolic compounds. On the other hand, the carboxyl as the hydrophilic groups was removed so as to promote the mixing of lignin and polyacrylonitrile (PAN, blending agent) in organic solvents. Additionally, the heterogeneity was reduced by screening large molecular weight SCG lignin with low polydispersity index (PDI). Fortunately, with 1:1 mass ratio of the above fractionated lignin and PAN as substrate, the LCNFs could reach to comparable mechanic properties with those of pure PAN CNFs. This work can provide a new way to not only promote the utilization of SCG lignin but also accelerate the development of LCNFs.

State of the Art and New Directions on Electrospun Lignin/Cellulose Nanofibers for Supercapacitor Application: A Systematic Literature Review

Supercapacitors are energy storage devices with high power density, rapid charge/discharge rate, and excellent cycle stability. Carbon-based supercapacitors are increasingly attracting attention because of their large surface area and high porosity. Carbon-based materials research has been recently centered on biomass-based materials due to the rising need to maintain a sustainable environment. Cellulose and lignin constitute the major components of lignocellulose biomass. Since they are renewable, sustainable, and readily accessible, lignin and cellulose-based supercapacitors are economically viable and environmentally friendly. This review aims to systematically analyze published research findings on electrospun lignin, cellulose, and lignin/cellulose nanofibers for use as supercapacitor electrode materials. A rigorous scientific approach was employed to screen the eligibility of relevant articles to be included in this study. The research questions and the inclusion criteria were clearly defined. The included articles were used to draw up the research framework and develop coherent taxonomy of literature. Taxonomy of research literature generated from the included articles was classified into review papers, electrospun lignin, cellulose, and lignin/cellulose nanofibers for use as supercapacitor electrode materials. Furthermore, challenges, recommendations, and research directions for future studies were equally discussed extensively. Before this study, no review on electrospun lignin/cellulose nanofiber-based supercapacitors has been reported. Thus, this systematic review will provide a reference for other researchers interested in developing biomass-based supercapacitors as an alternative to conventional supercapacitors based on petroleum products.

Sustainable dialdehyde polysaccharides as versatile building blocks for fabricating functional materials: An overview

Dialdehyde polysaccharide (DAP), containing multiple aldehyde groups, can react with materials having amino groups via Schiff base crosslinking. Besides, it can also react with materials having carbonyl/hydroxyl groups via aldol reactions. Based on these intriguing properties, DAPs can be employed as versatile building blocks to fabricate functional materials used in biomedical field, wastewater treatment, leather manufacture, and electrochemistry field. This review aims to provide an overview of the recent advances in fabricating biomaterials, adsorbents, leather tanning agents, and electrochemical materials based on DAPs. The basic fabricating strategy and principle of these materials and their performances are overall summarized, along with a discussion of associated scalability challenges, technological strategies to overcome them, and the prospect for commercial translations of this versatile material. Blending the versatility of DAP with material science and technological advances can provide a powerful tool to develop more DAP-based functional materials in a scalable way.