In Situ Charge Transfer at the Ag@ZnO Photoelectrochemical Interface toward the High Photocatalytic Performance of H2 Evolution and RhB Degradation

Conjugated Porous Organic Polymers Featuring Both Soft-Hard Combined Coordination Sites and Photoelectrochemical Properties for Palladium Capture and Subsequent Photocatalysis

Palladium (Pd) capture from high-level liquid waste for subsequent photocatalytic applications is desirable for the development of nuclear energy and the reutilization of valuable resources. Herein, we approach our design with a unique porous organic polymer containing thiazolo[5,4-d]thiazole units (denoted as TzPOP-OH). It possesses two potential soft-hard (N-O and S-O) combined coordination sites for Pd(II) coordination and features strong donor-acceptor repeating units and high planarity of linkage enforced by hydrogen bonds for subsequent photocatalysis. Accordingly, TzPOP-OH with three hydroxyl groups on the linkage exhibits a high Pd(II) capacity of 369 mg g-1 at 3 M HNO3, considerably surpassing those of the controlled polymer TzPOP without hydroxyl groups and most other reported materials. Additionally, TzPOP-OH boasts other merits, including outstanding acid tolerance, extraordinary radiation stability, good reusability, and remarkable selectivity. After palladium adsorption, Pd@TzPOP-OH demonstrates impressive photodegradation efficiency to reduce the concentration of rhodamine B in contaminated urban water from 10 to less than 0.1 ppm. This work provides a feasible approach to designing materials with both suitable coordination microenvironments and semiconductor properties for metal separation and photocatalysis.

Cu-doped ZnO/Ag/CuO heterostructure: superior photocatalysis and charge transfer

Doped semiconductor heterostructures have superior properties compared to their components. In this study, we observed the synthesis of Cu-doped ZnO/Ag/CuO heterostructure with the presence of charge transfer and visible light-harvesting properties resulting from doping and heterojunction. The porous heterostructures were prepared using the bottom-up combustion (BUC) approach. This method generated porous heterostructures by eliminating gaseous by-products. X-ray diffraction (XRD) optimization revealed that the ideal conditions included 1.00 g of polyvinyl alcohol (PVA), a synthesis temperature of 50 °C, and a 1 hour calcination time. Introducing copper (Cu) into the zinc oxide (ZnO) lattice caused a high-angle shift in the XRD pattern peaks. High-resolution transmission electron microscopy (HRTEM) images and XRD patterns confirmed the formation of Cu-doped ZnO/Ag/CuO (c-zac) heterostructures. Elemental mapping analysis confirmed the even surface distribution of Ag metal. The c-zac heterostructures exhibited superior optoelectrical and charge transfer properties compared to single ZnO. The heterostructures demonstrated improved methylene blue (MB) dye degradation potential (k = 0.065 min-1) compared to single ZnO (k = 0.0041 min-1). This photocatalytic potential is attributed to enhanced light absorption and charge transfer properties. The extended visible light absorption resulted from CuO and Ag's surface plasmon resonance properties. The selected 15c-zac heterostructure also performed well in a reusability photocatalytic test, remaining effective until the 3rd cycle. Consequently, this heterostructure holds promise for scaling up as a catalyst for environmental remediation.

Direct Excitation Transfer in Plasmonic Metal-Chalcopyrite-Hybrids: Insights from Single Particle Line Shape Analysis

Hybrid nanomaterials containing both noble metal and semiconductor building blocks provide an engineerable platform for realizing direct or indirect charge and energy transfer for enhanced plasmonic photoconversion and photocatalysis. In this work, silver nanoparticles (AgNPs) and chalcopyrite (CuFeS2) nanocrystals (NCs) are combined into a AgNP@CuFeS2 hybrid structure comprising NCs embedded in a self-assembled lipid coating around the AgNP core. In AgNP@CuFeS2 hybrid structures, both metallic and semiconductor NCs support quasistatic resonances. To characterize the interactions between these resonances and their effect on potential charge and energy transfer, direct interfacial excitation transfer between the AgNP core and surrounding CuFeS2 NCs is probed through single particle line shape analysis and supporting electromagnetic simulations. These studies reveal that CuFeS2 NCs localized in the evanescent field of the central AgNP induce a broadening of the metal NP line shape that peaks when an energetic match between the AgNP and CuFeS2 NC resonances maximizes direct energy transfer. Dimers of AgNPs whose resonances exhibit poor energetic overlap with the CuFeS2 NC quasistatic resonance yield much weaker line shape broadening in a control experiment, corroborating the existence of resonant energy transfer in the AgNP@CuFeS2 hybrid. Resonant coupling between the metallic and semiconductor building blocks in the investigated hybrid architecture provides a mechanism for utilizing the large optical cross-section of the central AgNP to enhance the generation of reactive charge carriers in the surrounding semiconductor NCs for potential applications in photocatalysis.

A critical mini-review on doping and heterojunction formation in ZnO-based catalysts

This mini-review on doping and heterojunctions for catalysis applications provides a comprehensive overview of key aspects. Doping, when carried out adequately with a uniform distribution, creates a new energy level that significantly enhances charge transfer and light absorption. This new level alters the material's morphology and enhances intrinsic defects. For instance, ZnO, despite its exceptional band edge concerning oxygen reduction and water oxidation redox potentials, faces the issue of electron-hole recombination. However, forming a heterojunction can effectively aid charge transfer and prolong electron-hole relaxation without recombination. This is where the role of doping and heterojunctions becomes crucial. Additionally, incorporating noble metals with S- and Z-scheme heterojunctions offers a promising mechanism for charge transfer and visible light harvesting, further amplifying the catalytic properties.

Facile Preparation of Magnetically Separable Fe3O4/ZnO Nanocomposite with Enhanced Photocatalytic Activity for Degradation of Rhodamine B

Magnetic separation of photocatalysts holds great promise for water treatment. A magnetic separation method has a positive effect on the recovery of catalysts after degradation. In this paper, an efficient and reusable catalytic system is developed based on coating magnetic Fe3O4 by depositing Fe2+ on the surface of ZnO. The Fe3O4/ZnO nanocomposite exhibits enhanced performance for organic pollutant degradation. The Fe3O4/ZnO system demonstrates a high photocatalytic activity of 100% degradation efficiency in Rhodamine B (RhB) degradation under UV light irradiation for 50 min. The excellent photocatalytic activity is primarily due to the separation of photogenerated electron-hole pairs being facilitated by the strong interaction between Fe3O4 and ZnO. The induction of the magnetic Fe3O4 endows the Fe3O4/ZnO composite with superior magnetic separation capability from water. Experiments with different radical scavengers revealed that the hydroxyl radical (·OH) is the key reactive radical for the effective degradation of RhB. This work innovatively affords a common interfacial dopant deposition strategy for catalytic application in the degradation of organic dye pollutants and catalyst separation from wastewater efficiently.

Metal-Organic Frameworks-Derived Nanocarbon Materials and Nanometal Oxides for Photocatalytic Applications

Harnessing low-density solar energy and converting it into high-density chemical energy through photocatalysis has emerged as a promising avenue for the production of chemicals and remediation of environmental pollution, which contributes to alleviating the overreliance on fossil fuels. In recent years, metal-organic frameworks (MOFs) have gained widespread application in the field of photocatalysis due to their photostability, tunable structures, and responsiveness in the visible light range. However, most MOFs exhibit relatively low response to light, limiting their practical applications. MOFs-derived nanomaterials not only retain the inherent advantages of pristine MOFs but also show enhanced light adsorption and responsiveness. This review categorizes and summarizes MOFs-derived nanomaterials, including nanocarbons and nanometal oxides, providing representative examples for the synthetic strategies of each category. Subsequently, the recent research progress on MOFs-derived materials in photocatalytic applications are systematically introduced, specifically in the areas of photocatalytic water splitting to H2, photocatalytic CO2 reduction, and photocatalytic water treatment. The corresponding mechanisms involved in each photocatalytic reaction are elaborated in detail. Finally, the review discusses the challenges and further directions faced by MOFs-derived nanomaterials in the field of photocatalysis, highlighting their potential role in advancing sustainable energy production and environmental remediation.

Green synthesis of silver doped zinc oxide/magnesium oxide nanocomposite for waste water treatment and examination of their cytotoxicity properties

This research attempted to prepare silver-doped zinc oxide/magnesium oxide nanocomposite (Ag-doped ZnO/MgO-NCP) using Mentha pulegium plant extract. The synthesized NCP was investigated by X-ray diffraction analysis (XRD), Fourier Transform Infrared (FT-IR), Field Emission Scanning Electron Microscope (FESEM), Energy dispersive X-ray spectroscopy (EDX), Mapping, and UV-Visible analyses. The XRD data displayed cubic crystal structures for silver & magnesium oxide and a hexagonal framework for zinc oxide. Also, FESEM and PSA images of NCP pointed out, that the average size of the spherical morphology is about 10-16 nm, while the analysis of EDX confirmed the attendance of Zn, Mg, Ag, and O elements. Under UVA light, we tested the photocatalytic activity of NCP to the degradation of Methylene blue (MB) and Rhodamine B (RhB) dyes in various temperatures (400, 500, and 600 °C). The results of the photocatalytic test displayed that the degradation percentage of MB dye in pH = 9, nanocomposite amount ∼30 mg, and dye concentration ∼1 × 10 -5 M was about 98 %. We also evaluated the cytotoxicity of nanocomposite on cancer CT-26 cell line through the MTT method and obtained an IC50 value of 250 μg/mL.

Enhanced photocatalytic efficiency of porous ZnO coral-like nanoplates for organic dye degradation

ZnO nanomaterials have been extensively used as photocatalysts for the removal of pollutants in aqueous environments. This study explores the enhanced photocatalytic performance of porous ZnO coral-like nanoplates synthesized via a one-pot wet-chemical method and subsequent annealing treatment. Characterization through scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), powder X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, photoluminescence (PL) spectroscopy, and Brunauer-Emmett-Teller (BET) measurements confirmed the nanoplates' porous structure, single-crystal structure, 100 nm thickness, and 80 nm pore size. These unique structural characteristics of the ZnO coral-like nanoplates enabled effective photodegradation of the organic dye rhodamine B (RhB) under visible light irradiation. Under simulated sunlight, the ZnO photocatalyst exhibited exceptional performance, achieving a 97.3% removal rate of RhB after 210 minutes of irradiation. The prepared ZnO photocatalyst also showed remarkable photostability and regeneration capability for RhB photodegradation with a decreased efficiency of less than 15% after eight testing cycles. The potential mechanism of the ZnO photocatalyst toward RhB degradation was also studied and is discussed in detail.

Synthesis, optical and photocatalysis property of corn-like ZnO/ZnS heterojunction with a certain lattice defects

In order to greatly improve the photocatalytic properties, corn-like ZnO/ZnS heterojunctions with a particle size of about 60-71 nm have been synthesized by the solvothermal method and the subsequent sulfuration process. A declining trend is found for the specific surface area with increasing sulfuration time. The corn-like ZnO/ZnS heterojunctions exhibit good photocatalytic properties. With increasing sulfuration time, the degradation rate increases first and then decreases. The best degradation rate is observed for the heterojunction sulfurated for 90 min. The strong broad luminescence band is extremely beneficial to the absorption of visible light by multiphoton process. In addition, the energy transfer from ZnS to ZnO contributes to charge separation, forming a type-II heterojunction mechanism. After one cycle of photocatalytic process, except that corns become more broken, variation of particle size and shape is very small. The degradation speed of RhB after a second cycle of photocatalytic process is slower than the first one except when using the sample sulfurated for 360 min.

Rapid Microwave-Assisted Synthesis of ZnIn2S4 Nanosheets for Highly Efficient Photocatalytic Hydrogen Production

In this study, a facile and rapid microwave-assisted synthesis method was used to synthesize In₂S₃ nanosheets, ZnS nanosheets, and ZnIn₂S₄ nanosheets with sulfur vacancies. The two-dimensional semiconductor photocatalysts of ZnIn₂S₄ nanosheets were characterized by XRD, FESEM, BET, TEM, XPS, UV-vis diffuse reflectance, and PL spectroscopy. The ZnIn₂S₄ with sulfur vacancies exhibited an evident energy bandgap value of 2.82 eV, as determined by UV-visible diffuse reflectance spectroscopy, and its energy band diagram was obtained through the combination of XPS and energy bandgap values. ZnIn₂S₄ nanosheets exhibited about 33.3 and 16.6 times higher photocatalytic hydrogen production than In₂S₃ nanosheets and ZnS nanosheets, respectively, under visible-light irradiation. Various factors, including materials, sacrificial reagents, and pH values, were used to evaluate the influence of ZnIn₂S₄ nanosheets on photocatalytic hydrogen production. In addition, the ZnIn₂S₄ nanosheets revealed the highest photocatalytic hydrogen production from seawater, which was about 209.4 and 106.7 times higher than that of In₂S₃ nanosheets and ZnS nanosheets, respectively. The presence of sulfur vacancies in ZnIn₂S₄ nanosheets offers promising opportunities for developing highly efficient and stable photocatalysts for photocatalytic hydrogen production from seawater under visible-light irradiation.

Applications of BiOX in the Photocatalytic Reactions

BiOX (X = Cl, Br, I) families are a kind of new type of photocatalysts, which have attracted the attention of more and more researchers. The suitable band gaps and their convenient tunability via the change of X elements enable BiOX to adapt to many photocatalytic reactions. In addition, because of their characteristics of the unique layered structure and indirect bandgap semiconductor, BiOX exhibits excellent separation efficiency of photogenerated electrons and holes. Therefore, BiOX could usually demonstrate fine activity in many photocatalytic reactions. In this review, we will present the various applications and modification strategies of BiOX in photocatalytic reactions. Finally, based on a good understanding of the above issues, we will propose the future directions and feasibilities of the reasonable design of modification strategies of BiOX to obtain better photocatalytic activity toward various photocatalytic applications.

Preparation of carnation-like Ag-ZnO composites for enhanced photocatalysis under visible light

Carnation-like ZnO was synthesized by the facile precipitation method (at room temperature and in 120 min) to decompose dyes in an aqueous medium. The carnation-like ZnO had a stratified porous structure with a size of about 2-3μm, its petals had a smooth surface with a thickness of 5-10 nm and a width of about 300-500 nm. Ag-ZnO composites were synthesized using glucose with the assistance of PVP. The morphology of Ag-ZnO composites was almost unchanged compared to ZnO. Where, the Ag nanoparticles in the size range of 5-15 nm were uniformly dispersed on the ZnO petals, improving the catalytic ability of the composites in tartrazine (TA) degradation. The influence of Ag content on catalytic structure and performance of composite was studied. The 5Ag-ZnO sample had the highest BET surface area and pore volume and the lowest gap energy (Eg) among the as-synthesized samples. The 5Ag-ZnO sample proclaimed the degradation efficiency in 70 min of 97.8% and thek_apof 0.031 min^-1. The influences of catalyst content, solution pH, and concentration of dye on the photodegradation efficiency of the composite were thoroughly studied. Besides, the photocatalytic activity of the composite was demonstrated by degrading various organic substances and reusability. In addition, it was compared to a metal-semiconductor catalyst of Au-ZnO and semiconductor-semiconductor catalysts of MoS₂-ZnO, Cu₂O-ZnO, and SiO₂-ZnO. The catalytic mechanism under visible light was proposed.

Enhanced photoactive performance of three-layer structured Ag/Cu2O/TiO2 composites with tunable crystal microstructures

Ag particle-decorated Cu2O/TiO2 composite films effectively photodegrade MO solution under irradiation.

Decorating of Ag and CuO on ZnO Nanowires by Plasma Electrolyte Oxidation Method for Enhanced Photocatalytic Efficiency

In this work, photocatalytic performance is divulged in the ternary CuO-Ag-ZnO nanowire synthesized via a two-step approach. The decoration of Ag and CuO nanostructures onto the surface of ZnO nanowires was simply carried out by using the plasma electrolytic oxidation method in a short time. The structure, size, morphology, and optical properties of as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, and spectrophotometry measurements. The diameters of Ag nanoparticles and ZnO nanoflowers are in the range of 5–20 nm and 20–60 nm, respectively. Within the first 15 min, methyl orange was decolorized 96.3 and 82.8% in the CuO-Ag-ZnO and Ag-ZnO, respectively, and there is only about 46.7% of that decomposed in pure ZnO. The CuO-Ag-ZnO shows a higher rate constant k = 0.2007 min−1 and a lower half-life time t = 6.1 min compared to Ag-ZnO and bare ZnO nanowires. The photo-reusability of the ternary nanostructures was estimated to be much outweighed compared to ZnO nanowires. Interestingly, the synergic incorporation between noble metal–semiconductor or semiconductor–semiconductor in the interfaces of Ag-CuO, Ag-ZnO, and CuO-ZnO expands the visible light absorption range and eliminates the photogenerated electron–hole recombination, resulting in a superior visible-light-driven photocatalyst.

Charge Transfer in Patterned Bilayer Film of Ag/ZnS Composite by Magnetron Control Sputtering

Ordered heterojunction nanocap arrays composed of the bilayer film Ag/ZnS were prepared onto ordered two-dimensional polystyrene bead arrays by magnetron control sputtering, and the surface morphologies were tuned by changing the ZnS thickness. When the ZnS thickness varied from 10 to 30 nm with a Ag thickness of 5 nm, the roughness of the bilayer film Ag/ZnS increased obviously. The UV–VIS spectra showed the shifted LSPR peaks with ZnS thickness, which was attributed to the changes of the electron density as confirmed by Hall effect analysis. SERS observations confirmed the charge transfer process for the varied electromagnetic couplings when the ZnS thickness changed.

2D Molybdenum Sulfide-Based Materials for Photo-Excited Antibacterial Application

Bacterial infections have seriously threatened human health and the abuse of natural or artificial antibiotics leads to bacterial resistance, so development of a new generation of antibacterial agents and treatment methods is urgent. 2D molybdenum sulfide (MoS₂ ) has good biocompatibility, high specific surface area to facilitate surface modification and drug loading, adjustable energy bandgap, and high near-infrared photothermal conversion efficiency (PCE), so it is often used for antibacterial application through its photothermal or photodynamic effects. This review comprehensively summarizes and discusses the fabrication processes, structural characteristics, antibacterial performance, and the corresponding mechanisms of MoS₂ -based materials as well as their representative antibacterial applications. In addition, the outlooks on the remaining challenges that should be addressed in the field of MoS₂ are also proposed.

Sensitive photoelectrochemical detection of colitoxin DNA based on NCDs@CuO/ZnO heterostructured nanocomposites with efficient separation capacity of photo-induced carriers

A metal-organic framework (MOF) of Cu-TPA (terephthalic acid) microsphere was prepared, followed by calcinating the MOF precursor of Cu-TPA/ZIF-8 mixture to obtain the CuO/ZnO. N-doped carbon dots (NCDs) were employed to combine the CuO/ZnO composite to form a tripartite heterostructured architecture of NCDs@CuO/ZnO, which led to a fierce enlargement of the photocurrent response. This  was ascribed to the thinner-shell structure of the CuO microsphere and the fact that hollow ZnO particles could sharply promote the incidence intensity of visible light. The more porous defectiveness exposed on CuO/ZnO surface was in favor of rapidly infiltrating electrolyte ions. The p-n type CuO/ZnO composite with more contact interface could abridge the transfer distance of photo-induced electron (e^-1)/hole (h⁺) pairs and repress their recombination availably. NCDs not only could boost electron transfer rate on the electrode interface but also successfully sensitized the CuO/ZnO composite, which resulted in high conversion efficiency of photon-to-electron. The probe DNA (S1) was firmly assembled on the modified ITO electrode surface (S1/NCDs@CuO/ZnO) through an amidation reaction. Under optimal conditions, the prepared DNA biosensor displayed a wide linear range of 1.0 × 10^-6 ~ 7.5 × 10^-1 nM and a low limit of detection (LOD) of 1.81 × 10^-7 nM for colitoxin DNA (S2) measure, which exhibited a better photoelectrochemistry (PEC) analysis performance than that obtained by differential pulse voltammetry techniques. The relative standard deviation (RSD) of the sensing platform for target DNA detection of 5.0 × 10^-2 nM was 6.3%. This proposed DNA biosensor also showed good selectivity, stability, and reproducibility, demonstrating that the well-designed and synthesized photoactive materials of NCDs@CuO/ZnO are promising candidates for PEC analysis.

Hollow CdS nanotubes with ZIF-8 as co-catalyst for enhanced photocatalytic activity

Designing high-efficiency heterojunction photocatalysts for water splitting is an intriguing prospect in energy conversion. Herein, we successfully fabricated a CdS/ZIF-8 heterojunction system through a facile wet-chemically method, in which ZIF-8 nanoparticles were in-situ adhered on hollow CdS nanotubes. Due to the well-matched band structure and intimate interface contact in CdS/ZIF-8 hybrid structure, the interfacial charge separation in the established system was tremendously boosted. As a consequence, the established CdS/ZIF-8 heterojunction exhibited the optimal photocatalytic hydrogen production performance (2.10 mmol·g^-1 L^-1), which was 35 times higher than pristine CdS (0.06 mmol·g^-1·L^-1). We believe this strategy will endow new insights for the development of novel photocatalysts.

Recent progress of noble metals with tailored features in catalytic oxidation for organic pollutants degradation

With the increasing serious water pollutions, an increasing interest has given for the nanocomposites as environmental catalysts. To date, noble metals-based nanocomposites have been extensively studied by researchers in environmental catalysis. In detail, serving as key functional parts, noble metals are usually combined with other nanomaterials for rationally designing nanocomposites, which exhibit enhanced catalytic properties in pollutants removal. Noble metals in the nanocomposites possess tailored properties, thus playing different important roles in catalytic oxidation reactions for pollutants removal. To motivate the research and elaborate the progress of noble metals, this review (i) summarizes advanced characterization techniques and rising technology of theoretical calculation for evaluating noble metal, and (ii) classifies the roles according to their disparate mechanism in different catalytic oxidation reactions. Meanwhile, the enhanced mechanism and influence factors are discussed. (iii) The conclusions, facing challenges and perspectives are proposed for further development of noble metals-based nanocomposites as environmental catalysts.

Bimetallic Ni–Mo nitride@N-doped C as highly active and stable bifunctional electrocatalysts for full water splitting

NiMoN-2 nanosheets were used as bifunctional catalysts and exhibited high total water decomposition activity. Only a cell voltage of 1.58 V was required to attain a current density of 10 mA cm−2.

Binary Au-Cu Reaction Sites Decorated ZnO for Selective Methane Oxidation to C1 Oxygenates with Nearly 100% Selectivity at Room Temperature

Direct and efficient oxidation of methane to methanol and the related liquid oxygenates provides a promising pathway for sustainable chemical industry, while still remaining an ongoing challenge owing to the dilemma between methane activation and overoxidation. Here, ZnO with highly dispersed dual Au and Cu species as cocatalysts enables efficient and selective photocatalytic conversion of methane to methanol and one-carbon (C1) oxygenates using O₂ as the oxidant operated at ambient temperature. The optimized AuCu-ZnO photocatalyst achieves up to 11225 μmol·g^-1·h^-1 of primary products (CH₃OH and CH₃OOH) and HCHO with a nearly 100% selectivity, resulting in a 14.1% apparent quantum yield at 365 nm, much higher than the previous best photocatalysts reported for methane conversion to oxygenates. In situ EPR and XPS disclose that Cu species serve as photoinduced electron mediators to promote O₂ activation to ^•OOH, and simultaneously that Au is an efficient hole acceptor to enhance H₂O oxidation to ^•OH, thus synergistically promoting charge separation and methane transformation. This work highlights the significances of co-modification with suitable dual cocatalysts on simultaneous regulation of activity and selectivity.

Synergistic Photocatalytic-Adsorption Removal of Basic Magenta Effect of AgZnO/Polyoxometalates Nanocomposites

The bifunctional photocatalytic-adsorbent AgZnO/polyoxometalates (AgZnO/POMs) nanocomposites were synthesized by combining AgZnO hybrid nanoparticles and polyoxometalates [Cu(L)₂(H₂O)]H₂[Cu(L)₂(P₂Mo₅O₂₃)]⋅4H₂O (HL = C₆H₆N₂O) into nanostructures via a sonochemical method. Transmission electron microscopy (TEM) indicated that AgZnO/POMs nanocomposites were uniform with narrow particle size distribution and without agglomeration. X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis confirmed the nanostructure and composition of AgZnO/POMs nanocomposites. The ultraviolet-visible spectra (UV-Vis) and photoluminescence spectra (PL) confirmed excellent optical properties of the AgZnO/POMs nanocomposites. 94.13% ± 0.61 of basic magenta (BM) in aqueous solution could be removed using the AgZnO/POMs nanocomposites through adsorption and photocatalysis. The kinetic analysis showed that both the adsorption and photocatalysis process conform to pseudo-second-order kinetics. In addition, the removal rate of AgZnO/POMs nanocomposites was found to be almost unchanged after 5 cycles of use. The bifunctional photocatalytic-adsorbent AgZnO/POMs nanocomposites with high stability and cycling performance have broad application prospects in the treatment of refractory organic dye wastewater containing triphenylmethane.

Hydrogenated Amorphous TiO2-x and Its High Visible Light Photoactivity

Hydrogenated crystalline TiO₂ with oxygen vacancy (O_V) defect has been broadly investigated in recent years. Different from crystalline TiO₂, hydrogenated amorphous TiO_2−x for advanced photocatalytic applications is scarcely reported. In this work, we prepared hydrogenated amorphous TiO_2−x (HA-TiO_2−x) using a unique liquid plasma hydrogenation strategy, and demonstrated its highly visible-light photoactivity. Density functional theory combined with comprehensive analyses was to gain fundamental understanding of the correlation among the O_V concentration, electronic band structure, photon capturing, reactive oxygen species (ROS) generation, and photocatalytic activity. One important finding was that the narrower the bandgap HA-TiO_2−x possessed, the higher photocatalytic efficiency it exhibited. Given the narrow bandgap and extraordinary visible-light absorption, HA-TiO_2−x showed excellent visible-light photodegradation in rhodamine B (98.7%), methylene blue (99.85%), and theophylline (99.87) within two hours, as well as long-term stability. The total organic carbon (TOC) removal rates of rhodamine B, methylene blue, and theophylline were measured to 55%, 61.8%, and 50.7%, respectively, which indicated that HA-TiO_2−x exhibited high wastewater purification performance. This study provided a direct and effective hydrogenation method to produce reduced amorphous TiO_2−x which has great potential in practical environmental remediation.

Silver nanomaterials: synthesis and (electro/photo) catalytic applications

In view of their unique characteristics and properties, silver nanomaterials (Ag NMs) have been used not only in the field of nanomedicine but also for diverse advanced catalytic technologies. In this comprehensive review, light is shed on general synthetic approaches encompassing chemical reduction, sonochemical, microwave, and thermal treatment among the preparative methods for the syntheses of Ag-based NMs and their catalytic applications. Additionally, some of the latest innovative approaches such as continuous flow integrated with MW and other benign approaches have been emphasized that ultimately pave the way for sustainability. Moreover, the potential applications of emerging Ag NMs, including sub nanomaterials and single atoms, in the field of liquid-phase catalysis, photocatalysis, and electrocatalysis as well as a positive role of Ag NMs in catalytic reactions are meticulously summarized. The scientific interest in the synthesis and applications of Ag NMs lies in the integrated benefits of their catalytic activity, selectivity, stability, and recovery. Therefore, the rise and journey of Ag NM-based catalysts will inspire a new generation of chemists to tailor and design robust catalysts that can effectively tackle major environmental challenges and help to replace noble metals in advanced catalytic applications. This overview concludes by providing future perspectives on the research into Ag NMs in the arena of electrocatalysis and photocatalysis.

Ultrahigh piezocatalytic capability in eco-friendly BaTiO3 nanosheets promoted by 2D morphology engineering

Piezocatalysis, converting mechanical vibration into chemical energy, is an emerging technology to address environmental issues. In this work, we propose an efficient method to significantly improve the piezocatalytic activity by morphology engineering rather than composition design. The catalytic property in BaTiO₃ nanocrystallites with diverse morphologies is investigated by dye degradation and hydrogen production under ultrasonic vibration. The BaTiO₃ nanosheets exhibit an excellent piezocatalytic activity with a degradation rate of 0.1279 min^-1 for Rhodamine B, far beyond those in previous piezocatalytic literature and even comparable to excellent photocatalysts, and also a high hydrogen production rate of 92 μmol g^-1 h^-1. Compared with nanowires and nanoparticles, the 2D morphology greatly enhances the piezocatalytic activity in nanosheets owing to much larger piezoelectric potential. This proves that the piezocatalytic property is dominated by the morphology-dependent piezoelectricity, rather than specific surface area as other catalysis. Dominated by bending vibrating mode, the piezocatalytic activity reaches a maximum at the piezoelectric resonating frequency, and it increases with the ultrasonic power. Moreover, it has good reusability and wide versatility for catalytic degradation. This work gives an in-depth understanding of piezocatalytic mechanism and provides a way to develop high performance and eco-friendly piezocatalysts.

One-pot, ligand-free, room-temperature synthesis of Au/Pd/ZnO nanoclusters with ultra-low noble metal loading and synergistically improved photocatalytic performances

Au/Pd/ZnO nanoclusters with ultra-low noble metal loadings were prepared by a one-step and ligand-free method at room temperature. HRTEM, ICP-MS, XPS, and elemental mapping analysis confirmed that the obtained Au/Pd/ZnO nanoclusters were composed of ZnO nanoclusters decorated with well-dispersed AuPd nanoparticles. Au/Pd/ZnO nanoclusters exhibited higher photocatalytic activity compared with those of pristine ZnO, Au/ZnO and Pd/ZnO. Moreover, the high catalytic activity of Au/Pd/ZnO nanoclusters could be maintained even after 5 cycles of photocatalytic reaction. A mechanism for the enhanced photocatalytic performance was also suggested, which was in light of the synergistic effects of the SPR effect from Au and the improved photogenerated charge carrier separation from Pd.

Branched In2O3 Mesocrystal of Ordered Architecture Derived from the Oriented Alignment of a Metal-Organic Framework for Accelerated Hydrogen Evolution over In2O3-ZnIn2S4

It is fascinating yet challenging to assemble anisotropic nanowires into ordered architectures of high complexity and intriguing functions. We exploited a facile strategy involving oriented etching of a metal-organic fragment (MOF) to advance the rational design of highly ordered nanostructures. As a proof of concept, a microscale MIL-68(In) single crystal was etched with a K₃[Co(CN)₆] solution to give a microtube composed of aligned MIL-68(In) nanorods. Annealing such a MIL-68(In) microtube readily created an unprecedented branched In₂O₃ mesocrystal by assembly of In₂O₃ nanorods aligned in order. The derived ordered-In₂O₃-ZnIn₂S₄ is more efficient in catalyzing visible-light-driven H₂ evolution (8753 μmol h^-1 g^-1) outperforming the disordered-In₂O₃-ZnIn₂S₄ counterpart (2700 μmol h^-1 g^-1) as well as many other state-of-the-art ZnIn₂S₄-based photocatalysts. The ordered architecture significantly boosts the short-range electron transfer in an In₂O₃-ZnIn₂S₄ heterojunction but has a negligible impact on the long-range electron transfer among In₂O₃ mesocrystals. The density functional theory (DFT) calculation reveals that the oriented etching is achieved by the selective binding of the [Co(CN)₆]^3- etchant on the (110) plane of MIL-68(In), which can drag the In atoms out of the framework in order. Our findings could broaden the technical sense toward advanced photocatalyst design and impose scientific impacts on unveiling how ordered photosystems operate.

Photocatalytic Activity of Silver-Based Biomimetics Composites

Different Ag@TiO2 and Ag@ZnO catalysts, with nanowire (NW) structure, were synthesized containing different amounts of silver loading (1, 3, 5, and 10 wt.%) and characterized by FE-SEM, HRTEM, BET, XRD, Raman, XPS, and UV-vis. The photocatalytic activity of the composites was studied by the production of hydrogen via water splitting under UV-vis light and the degradation of the antibiotic ciprofloxacin. The maximum hydrogen production of all the silver-based catalysts was obtained with a silver loading of 10 wt.% under irradiation at 500 nm. Moreover, 10%Ag@TiO2 NWs was the catalyst with the highest activity in the hydrogen production reaction (1119 µmol/hg), being 18 times greater than the amount obtained with the pristine TiO2 NW catalyst. The most dramatic difference in hydrogen production was obtained with 10%Ag@TiO2-P25, 635 µmol/hg, being 36 times greater than the amount reported for the unmodified TiO2-P25 (18 µmol/hg). The enhancement of the catalytic activity is attributed to a synergism between the silver nanoparticles incorporated and the high surface area of the composites. In the case of the degradation of ciprofloxacin, all the silver-based catalysts degraded more than 70% of the antibiotic in 60 min. The catalyst that exhibited the best result was 3%Ag@ZnO commercial, with 99.72% of degradation. The control experiments and stability tests showed that photocatalysis was the route of degradation and the selected silver-based catalysts were stable after seven cycles, with less than 1% loss of efficiency per cycle. These results suggest that the catalysts could be employed in additional cycles without the need to be resynthesized, thus reducing remediation costs.

SnNb2O6/NiCo-LDH Z-scheme heterojunction with regulated oxygen vacancies obtained by engineering the crystallinity for efficient and renewable photocatalytic H2 evolution

SnNb2O6/NiCo-LDH Z-scheme heterojunction with abundant oxygen vacancies exhibited highly activity and stability toward photocatalytic H2 evolution, ascribed to the regeneration of oxygen vacancy by engineering the crystallinity.

The influence of ZnO loading amount on the photocatalytic performance of Fe3O4@SiO2@ZnO–Ag composites toward the degradation of organic pollutants and hydrogen evolution

Magnetically reusable Fe3O4@SiO2@ZnO-Ag with well-designed core-shell structure, controllable ZnO loading amount and excellent photocatalytic ability toward organic pollutants degradation and hydrogen evolution were synthesized.

Advancing Applications of Black Phosphorus and BP-Analog Materials in Photo/Electrocatalysis through Structure Engineering and Surface Modulation

Black phosphorus (BP), an emerging 2D material semiconductor material, exhibits unique properties and promising application prospects for photo/electrocatalysis. However, the applications of BP in photo/electrocatalysis are hampered by the instability as well as low catalysis efficiency. Recently, tremendous efforts have been dedicated toward modulating its intrinsic structure, electronic property, and charge separation for enhanced photo/electrocatalytic performance through structure engineering. Simultaneously, the search for new substitute materials that are BP-analogous is ongoing. Herein, the latest theoretical and experimental progress made in the structural/surface engineering strategies and advanced applications of BP and BP-analog materials in relation to photo/electrocatalysis are extensively explored, and a presentation of the future opportunities and challenges of the materials is included at the end.

Fabrication of a Z-Scheme {001}/{110} Facet Heterojunction in BiOCl to Promote Spatial Charge Separation

The realization of high-efficiency carrier separation is of great meaning and challenge, which is crucial to boost the photocatalytic activity. Herein, we tackle this bottleneck by fabricating a {110}/{001} facet junction to effectively facilitate the separation of charge carriers. In this study, two different BiOCl nanoplates (BiOCl-H1 and BiOCl-H2) with coexposed {110} and {001} facets were synthesized under different pH conditions. The ratio of these facets could be adjusted by the pH value of the precursor. It was discovered that the photocatalytic performance of the obtained sample for pollutant removal is dependent on the facet ratio of these facets. Theoretical calculation results show the difference in the electronic structure and staggered alignment of these facets, thus endowing BiOCl with the possibility to fabricate a facet junction. Based on our logical analyses, the Z-scheme charge-transfer mechanism was accordingly put forward. Our work opens a new avenue for the construction of a Z-scheme facet heterojunction to enhance charge separation.