Dual-Functionalized Fluorescent Cationic Organic Network: Highly Efficient Detection and Removal of Dichromate from Water

Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

Imidazolium-Functionalized Conjugated Polymer for On-Site Visual and Ultrasensitive Detection of Toxic Hexavalent Chromium

Hexavalent chromium [Cr(VI)] is considered a serious environmental pollutant that possesses a hazardous effect on humans even at low concentrations. Thus, the development of a bifunctional material for ultratrace-selective detection and effective elimination of Cr(VI) from the environment remains highly desirable and scarcely reported. In this work, we explore an imidazolium-appended polyfluorene derivative PF-DBT-Im as a highly sensitive/selective optical probe and a smart adsorbent for Cr(VI) ions with an ultralow detection limit of 1.77 nM and removal efficiency up to 93.7%. In an aqueous medium, PF-DBT-Im displays obvious transformation in its emission color from blue to magenta on exclusively introducing Cr(VI), facilitating naked-eye colorimetric detection. Consequently, a portable sensory device integrated with a smartphone is fabricated for realizing real-time and on-site visual detection of Cr(VI). Besides, the imidazolium groups attached onto side chains of PF-DBT-Im are found to be highly beneficial for achieving selective and efficient elimination of Cr(VI) with capacity as high as 128.71 mg g-1. More interestingly, PF-DBT-Im could be easily regenerated following treatment with KBr and can be recycled at least five times in a row. The main factor behind ultrasensitive response and excellent removal efficiency is found to be anion-exchange-induced formation of a unique ground-state complex between PF-DBT-Im and Cr(VI), as evident by FT-IR, XPS, and simulation studies. Thus, taking advantage of the excellent signal amplification property and rich ion-exchange sites, a dual-functional-conjugated polymer PF-DBT-Im is presented for the concurrent recognition and elimination of Cr(VI) ions proficiently and promptly with great prospects in environmental monitoring and water decontamination.

Selective removal of Cr2O72- in aqueous solution by nonporous pure crystals of cucurbit[6]uril

Cucurbit[6]uril (Q[6]) could serve as a selective absorbent for the toxic anion Cr2O72-, which was demonstrated by the results of UV-vis, ICP, XPS, SEM, and EDS experiments. Single-crystal X-ray diffraction analysis revealed that capture capacity could be attributed to the outer-surface interactions of cucurbit[n]uril between Cr2O72- and the outer surface of Q[6].

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

High-ratio {100} plane-exposed ZnO nanosheets with dual-active centers for simultaneous photocatalytic Cr(VI) reduction and Cr(III) adsorption from water

The development of an efficient catalyst for the simultaneous removal of Cr(VI) and Cr(III) from water is required to eliminate the risk of Cr(III) reconversion in the photocatalytic Cr(VI) reduction process. ZnO with large regions of high-energy {001} and {101} surfaces is often used to degrade various pollutants due to its high activity. However, the more readily available low-energy facets have relatively limited its applications. Here, we report a new strategy that employs a high proportion of {100} plane-exposed ZnO nanosheets for simultaneous photocatalytic Cr(VI) reduction and Cr(III) adsorption. The mechanism of Zn-O co-exposed on the {100} plane as the dual-active centers to jointly promote Cr(VI) reduction and Cr(III) adsorption was clarified at the atomic level. ZnO nanosheets with a high exposure ratio of the {100} plane achieve a total Cr removal rate of over 90% within 120 min under simulated sunlight irradiation, neutral conditions, and a negligible difference in the band structure.

Development of Cationic Benzimidazole-Containing UiO-66 through Step-by-Step Linker Modification to Enhance the Initial Sorption Rate and Sorption Capacities for Heavy Metal Oxo-Anions

Effective and rapid capture of heavy metal oxo-anions from wastewater is a fascinating research topic, but it remains a great challenge. Herein, benzimidazole and -CH₃ groups were integrated into UiO-66 in succession via a step-by-step linker modification strategy that was performed by presynthesis modification (to give Bim-UiO-66) and subsequently by postsynthetic ionization (to give Bim-UiO-66-Me). The UiO-66s (UiO-66, Bim-UiO-66, and Bim-UiO-66-Me) were applied in the removal of heavy metal oxo-anions from water. The two benzimidazole derivatives (Bim-UiO-66 and Bim-UiO-66-Me) showed much better performance than UiO-66, as both the initial sorption rate and sorption capacities decreased in the order Bim-UiO-66-Me > Bim-UiO-66 > UiO-66. The maximum performances of Bim-UiO-66 are 5.1 and 1.7 times those of UiO-66. Remarkably, Bim-UiO-66-Me shows 7.5 and 3.0 times better performance than UiO-66. The higher absorptivity of cationic Bim-UiO-66-Me compared with UiO-66 can be attributed to a strong Coulombic interaction as well as an anion-π interaction and hydrogen bonding between the benzimidazolium functional group and heavy metal oxo-anions. The as-synthesized Bim-UiO-66-Me not only provides a promising candidate for application in removal of heavy metal oxo-anions in wastewater treatment but also opens up a new strategy for the design of high-performance adsorbents.

Rational Design of High-Performance Cationic Organic Network Adsorbents

Development of high-performance ionic organic network (ION) adsorbents is of great importance for water remediation. However, the research on IONs is still nascent, especially, the design philosophy regarding contaminant adsorption has rarely been explored. In this contribution, we optimized the adsorption efficiency of IONs by increasing the density of charged sites and improving their accessibility. We first produced a new cationic organic network (CON), CON-LDU4, with a high density of positive sites via synthesis from tetra(4-pyridyl)ethene. Compared to the analogue CON-LDU2 that synthesized from tetra(4-(4-pyridyl)phenyl)ethene, CON-LDU4 exhibited higher efficiency in adsorption of methyl blue, indicating that the higher ionic density results in the higher adsorption efficiency. To further improve the accessibility of the active sites, another new CON material (CON-LDU5) was synthesized by employing a hard template. CON-LDU5 exhibited a larger specific surface area than CON-LDU4, with clearly enhanced adsorption efficiency. Finally, CON-LDU5 was used to capture CrO42- ions in water with fast adsorption kinetics (k2 = 0.0328 g mg-1 min-1) and high adsorption capacity (369 mg g-1).

Deep-Red Luminescent Cuprous-Lead Bromide as a Dual-Responsive Sensor for Fe3+ and Cr2O72

Both optically active 1-tetrazole-4-imidazole-benzene (TIB) with bifunctional azole groups and heterometals were utilized to build a new type of one-dimensional (1-D) hybrid cuprous-lead bromide [PbCu₂Br₄(TIB)₂]_n (1), which exhibits infrequent deep-red luminescent emission at 704 nm with a large Stokes shift of 321 nm. Owing to the existence of rare free Lewis basic imidazole groups, 1 can be used as the sole dual-responsive luminescent sensor for the efficient and selective detection of Fe³⁺ and Cr₂O₇^2- in an aqueous solution.

Mitochondria-targeted acridine-based dual-channel fluorescence chemosensor for detection of Sn4+ and Cr2O72- ions in water and its application in discriminative detection of cancer cells

The goal of the present work was to fabricate a new low-cost, easy-to-prepare, dual-channel fluorescence chemosensor comprised of acridine-diphenylacetyl moieties (NDA) to enable remarkable Sn⁴⁺ detection in water and biological medium. The resulting NDA-Sn⁴⁺ complex was utilized for the distinguished identification of Cr₂O₇^2- ions from other anions and biomolecules. These investigations involve the absorption, fluorescence, and electrochemical methods for the detection of Sn⁴⁺ and Cr₂O₇^2- ions in pure water. The mechanism for NDA-mediated Sn⁴⁺ detection was experimentally determined by FT-IR, NMR titrations, mass (ESI) analyses, and DFT calculations. The obtained results indicate that the NDA chemosensor possessed excellent performance characteristics including good water solubility and compatibility, quick response time (less than 10 s), high sensitivity (Sn⁴⁺ = 0.268 μM and Cr₂O₇^2- = 0.160 μM), and selectivity against coexisting metals, anions, amino acids, and peptides. The chemosensor NDA induced negligible toxicity in live cells and was successfully utilized as a biomarker for the tracking of Sn⁴⁺ in human normal and cancer cells. More importantly, NDA demonstrates distinguished recognition of Sn⁴⁺ in human cancer cells rather than in normal live cells. Additionally, NDA was shown to act as a mitochondria-targeted probe in FaDu cells.

3D Metallo-organic coordination assembly-based anion-enriched supramolecular material for fast and efficient removal of Cr2O72

Chromium(VI), especially dichromate (Cr₂O₇^2-) contamination in wastewater due to rapid industrialization with uncontrolled effluent management is still a serious concern which needs focused attention. Multiprong approaches are practiced such as chemical precipitation, reverse osmosis, ion-exchange, adsorption by granular activated carbon etc. to capture and separate this "Group A" human carcinogenic effluent from water. However, low capture capacity, non-reusability, poor selectivity, pH-limited performance are some major limitations of these techniques. Recently, metal organic frameworks (MOFs), metal organic cages (MOCs), porous organic polymers (POPs) or covalent organic frameworks (COFs), covalent organic networks (CONs) etc. emerged as new-generation materials to overcome such limitations. However, the development is still in initial stage and issues related to structural stability and integrity of many MOFs in water and in wide pH range, as well as reusability need to be addressed. At this juncture, herein we report a novel [Zn(terpyridine)₂]²⁺-templated trisimidazolium-based highly cationic three-dimensional metal-organic coordination assembly (3D MOCA), serving as a new class of efficient, fast, robust and recyclable dichromate-removal material. Not only the highly cationic assembly is enriched with a high density of Br^- anions, but its three-dimensional propagation and flexibility also exposes the exchangeable Br^- ions for facile anion-metathesis with Cr₂O₇^2-. By virtue of the benefits of these attributes, the presented supramolecular material exhibits a high capture capacity (469 mg g^-1), fast exchange kinetics (0.028 g mg^-1 min^-1), wide working pH range (pH 2-12) and reusability up to a minimum of 10 cycles without much loss of efficiency. Key mechanistic examinations highlight the evidences in favor of ion-exchange-based chemistry to be responsible for dichromate removal with the present material.