Multiresponsive Supramolecular Luminescent Hydrogels Based on a Nucleoside/Lanthanide Complex

A sodium carboxymethyl cellulose-induced emission and gelation system for time-dependent information encryption and anti-counterfeiting

Many lanthanide complexes do not form gel or even exhibit characteristic luminescence of lanthanide ions, which limits their applications in many fields. Therefore, there is an urgent need for a third component that can not only promote emission but also gel the lanthanide complex system to construct new smart materials such as time-dependent information encryption and anti-counterfeiting materials. Herein, a luminescent lanthanide metallogel was successfully prepared by using the third component sodium carboxymethyl cellulose (NaCMC) to induce the gelation and luminescence of the complex (H3L/Tb3+) of 4,4',4″-((benzene-1,3,5-tricarbonyl)tris(azanediyl)) tris(2-hydroxybenzoic acid) (H3L) and Tb3+. The H3L/Tb3+ complex itself does not form gel and has no characteristic luminescence of Tb3+. Moreover, the multicolor emission of H3L/Tb3+/NaCMC gels was prepared based on Förster resonance energy transfer (FRET) platforms to obtain a high-security level information encryption and anti-counterfeiting materials. These multicolor emission gels exhibit emission color tunability with time dependence due to the different energy transfer efficiencies at each pH node controlled by glucono-δ-lactone hydrolysis time. Based on the time response characteristics, the time-dependent information encryption and anti-counterfeiting materials are developed.

Developing a machine learning model for accurate nucleoside hydrogels prediction based on descriptors

Supramolecular hydrogels derived from nucleosides have been gaining significant attention in the biomedical field due to their unique properties and excellent biocompatibility. However, a major challenge in this field is that there is no model for predicting whether nucleoside derivative will form a hydrogel. Here, we successfully develop a machine learning model to predict the hydrogel-forming ability of nucleoside derivatives. The optimal model with a 71% (95% Confidence Interval, 0.69-0.73) accuracy is established based on a dataset of 71 reported nucleoside derivatives. 24 molecules are selected via the optimal model external application and the hydrogel-forming ability is experimentally verified. Among these, two rarely reported cation-independent nucleoside hydrogels are found. Based on their self-assemble mechanisms, the cation-independent hydrogel is found to have potential applications in rapid visual detection of Ag+ and cysteine. Here, we show the machine learning model may provide a tool to predict nucleoside derivatives with hydrogel-forming ability.

Luminescent lanthanide-containing gelatin/polydextran/laponite nanocomposite double-network hydrogels for processing and sensing applications

Lanthanide-containing nanomaterials have gained significant popularity for their utilization in polymeric networks, enabling the creation of luminescent nanocomposites for advanced applications. In this study, we developed a new type of lanthanide-containing nanocomposite hydrogels by incorporating terbium-containing laponite (Tb3+@Lap) into the networks of polyethyleneimine-modified gelatin/polydextran aldehyde (PG/PDA) through dynamic bonds. The structures and properties of the Tb3+@Lap-containing nanocomposite double-network (ncDN) hydrogels were comprehensively investigated in comparison with the DN hydrogels with a pure polymeric network and the Lap-containing ncDN hydrogels. The PG/PDA/Tb3+@Lap ncDN hydrogels with multiple dynamic bonds (i.e., imine bonds, coordination bonds, hydrogen bonds, and electrostatic interactions) exhibited remarkable characteristics of shear-thinning and self-healing, making them suitable for the construction of hydrogel scaffolds on a macroscale using fabrication techniques such as electrospinning and 3D printing. Moreover, the PG/PDA/Tb3+@Lap ncDN hydrogels have been demonstrated to act as sensitive and selective luminescent sensors for detecting copper ions. Taken together, a versatile lanthanide-containing ncDN hydrogel platform capable of dynamic features is developed for processing and sensing applications.

Rapid Semiconducting Supramolecular Mg(II)-Metallohydrogel: Exploring Its Potential in Nonvolatile Resistive Switching Applications and Antiseptic Wound Healing Properties

An effective strategy was employed for the rapid development of a supramolecular metallohydrogel of Mg(II) ion (i.e., Mg@PEHA) using pentaethylenehexamine (PEHA) as a low-molecular-weight gelator in aqueous medium under ambient conditions. The mechanical stability of the synthesized Mg@PEHA metallohydrogel was characterized by using rheological analysis, which showed its robustness across different angular frequencies and oscillator stress levels. The metallohydrogel exhibited excellent thixotropic behavior, which signifies that Mg@PEHA has a self-healing nature. Field emission scanning electron microscopy and transmission electron microscopy images were utilized to explore the rectangular pebble-like hierarchical network of the Mg@PEHA metallohydrogel. Elemental mapping through energy-dispersive X-ray spectroscopy analysis confirmed the presence of primary chemical constituents in the metallohydrogel. Fourier transform infrared spectroscopy spectroscopy provided insights into the possible formation strategy of the metallohydrogel. In this work, Schottky diode structures in a metal-semiconductor-metal geometry based on a magnesium(II) metallohydrogel (Mg@PEHA) were constructed, and the charge transport behavior was observed. Additionally, a resistive random access memory (RRAM) device was developed using Mg@PEHA, which displayed bipolar resistive switching behavior at room temperature. The researchers investigated the switching mechanism, which involved the formation or rupture of conduction filaments, to gain insights into the resistive switching process. The RRAM device demonstrated excellent performance with a high ON/OFF ratio of approximately 100 and remarkable endurance of over 5000 switching cycles. RRAM devices exhibit good endurance, meaning they can endure a large number of read and write cycles without significant degradation in performance. RRAM devices have shown promising reliability in terms of long-term performance and stability, making them suitable for critical applications that require reliable memory solutions. Significant inhibitory activity against the drug-resistant Klebsiella pneumonia strain and its biofilm formation ability was demonstrated by Mg@PEHA. The minimum inhibitory concentration value of the metallohydrogel was determined to be 3 mg/mL when it was dissolved in 1% DMSO. To study the antibiofilm activity, an MTT assay was performed, revealing that biofilm inhibition (60%) commenced at 1 mg/mL of Mg@PEHA when dissolved in 1% DMSO. Moreover, in the mouse excisional wound model, Mg@PEHA played a crucial role in preventing postoperative wound infections and promoting wound healing.

Bioinspired Multistimuli-Induced Synergistic Changes in Color and Shape of Hydrogel and Actuator Based on Fluorescent Microgels

Fluorescent hydrogels have emerged as one of the most promising candidates for developing biomimetic materials and artificial intelligence owing to their unique fluorescence and responsive properties. However, it is still challenging to fabricate hydrogel that exhibits synergistic changes in fluorescence color and shape in response to multistimulus via a simple method. Herein, blue- and orange-emitting fluorescent microgels (MGs) both are designed and synthesized with pH-, thermal-, and cationic-sensitivity via one-step polymerization, respectively. The two fluorescent MGs are incorporated into transparent doubly crosslinked microgel (DX MG) hydrogels with a preset ratio. The DX MG hydrogels can tune the fluorescent color accompanied by size variation via subjecting to external multistimulus. Thus, DX MG hydrogels can be exploited for multiresponsive fluorescent bilayer actuators. The actuators can undergo complex shape deformation and color changes. Inspired by natural organisms, an artificial morning glory with color and size changes are showcased in response to buffer solutions of different pH values. Besides, an intelligent skin hydrogel, imitating natural calotes versicolor, by assembling four layers of DX MG with different ratios of MGs, is tailored. This work serves as an inspiration for the design and fabrication of novel biomimetic smart materials with synergistic functions.

Novel Gemini Surfactant for Binding Eu(III)-Polyoxometalate into Hydrogels and Polymer Latexes

The incorporation of rare-earth ions into polymer matrices can lead to useful materials in various fields such as biomarkers, lasers, luminescent devices, optical storage materials, and so on. Methods of incorporation are either extremely simple, such as mixing the polymer and the ion of interest in adequate solvents, or more sophisticated such as synthesizing predesigned monomers that contain the rare-earth ion or binding the ion on an already formed polymer chain. Cationic gemini surfactants represent a class of surfactants that can be used to incorporate metal-oxygen cluster compounds by means of strong electrostatic interactions. In this study, first, a novel cationic gemini surfactant having double bonds on both side chains was designed and prepared. After characterization, the surfactant was used to synthesize hydrogels with different degrees of crosslinking and also as a surfmer in emulsion polymerization of methyl methacrylate. The resulted polymer matrices were able to bind europium-polyoxometalate Na₉[EuW₁₀O₃₆]^.32H₂O. In case of luminescent lanthanide ions, changing the microenvironment around the metal ion also changes the intensity of some emission peaks as well as other luminescent parameters. Investigation of emission spectra of Eu³⁺ indicates a decrease in the symmetry of the microenvironment, when the polyanions pass from water to latex, to surfactant solution, and to hydrogel.

A novel terbium (III) and aptamer-based probe for label-free detection of three fluoroquinolones in honey and water samples

Fluoroquinolones, a family of synthetic broad-spectrum antibiotics, are widely used in clinical medicine, farm animals and aquaculture. Residues of fluoroquinolones in samples have attracted much attention because of growing food safety and public health concerns. Here, a novel Tb³⁺ ion-enrofloxacin aptamer coordination probe was prepared to develop a sensitive and rapid label-free fluorescence assay for specific detection three fluoroquinolones. In presence of the target, Tb³⁺ ion- enrofloxacin aptamer probe specifically bound with enrofloxacin, norfloxacin and ciprofloxacin, leading to a sharp increase in fluorescence emission of the probe. Under the optimized conditions, fluorescence increased linearly in the 1.0-100.0 ng/mL range for the three fluoroquinolones, with 0.053 ng/mL limit of detection for ciprofloxacin, 0.020 ng/mL limit of detection for norfloxacin and 0.061 ng/mL limit of detection for enrofloxacin. Satisfactory recovery (80.10-102.48%) in spiked honey and water samples were obtained for the three fluoroquinolones with relative standard deviations between 0.21% and 5.44% (n = 3).

Organic-Inorganic Hybrid Luminescent Hydrogel Glued by a Cationic Polymeric Binder

Luminescent hydrogels have shown great potential in many fields, such as lighting, display, imaging, and sensing, because of their unique optical properties, biocompatibility, and easy processing. Organic-inorganic hybrid self-assembly can not only enhance the hydrogels' mechanical strength, but also retain their self-healing ability. Herein, a luminescent supramolecular hydrogel is reported, which is formed via self-assembly of the negatively charged Laponite nanosheets and cationic lanthanide coordination polymer. The corresponding results reveal that the multiple binding interaction between Laponite and the polymeric binder is vital for improving the mechanical performance of the obtained luminescent supramolecular hydrogel.

Lanthanide upconversion and downshifting luminescence for biomolecules detection

Biomolecules play critical roles in biological activities and are closely related to various disease conditions. The reliable, selective and sensitive detection of biomolecules holds much promise for specific and rapid biosensing. In recent years, luminescent lanthanide probes have been widely used for monitoring the activity of biomolecules owing to their long luminescence lifetimes and line-like emission which allow time-resolved and ratiometric analyses. In this review article, we concentrate on recent advances in the detection of biomolecule activities based on lanthanide luminescent systems, including upconversion luminescent nanoparticles, lanthanide-metal organic frameworks, and lanthanide organic complexes. We also introduce the latest remarkable accomplishments of lanthanide probes in the design principles and sensing mechanisms, as well as the forthcoming challenges and perspectives for practical achievements.

Luminescence sensitization of terbium-loaded supramolecular gels by hydroxybenzoic acids and used for salicylates sensing

The luminescent terbium (Tb³⁺)-loaded supramolecular gels were facilely prepared through the self-assembly of Fmoc-diphenylalanine (FmocPhePhe) at room temperature. Hydroxybenzoic acid (HA, the isomers are denoted as 2-HA, 3-HA, and 4-HA depending upon the positions of hydroxyl groups) was used as a sensitizer to Tb³⁺. The luminescence sensitization of Tb³⁺ in the gels was realized by the coordination with hydroxybenzoic acids. The spectra of luminescence, UV-vis, FT-IR, and ¹H NMR verified that this sensitization was attributed to the energy transfer from hydroxybenzoic acids to Tb³⁺. The results of XRD, SEM, and phase transfer temperature further indicated that the initial molecule arrangement of the gels was significantly changed by 2-HA, resulting in more ordered and more compact morphology of the gels. 2-HA exhibited more effective sensitization to Tb³⁺ in the gels than 3-HA and 4-HA. It was also found that 2-HA did not affect the self-assembly of FmocPhePhe. Due to the effective fluorescence sensitization by 2-HA, the as-prepared gels can be used for salicylic acid sensing with 6.8 μM of the detection limit. This strategy has been successfully used for the detection of salicylates in pharmaceuticals and cosmetics.

Multi-stimuli-responsive hydrogels and their medical applications

This review highlights the medical applications of multi-stimuli-responsive hydrogels as self-healing hydrogels, antibacterial materials and drug-delivery systems.

Research Progress Review of Preparation and Applications of Fluorescent Hydrogels

The fluorescent gel with good flexibility and biocompatibility has attracted more and more attention due to its excellent optical properties. In this paper, the research progresses in preparation methods and applications of fluorescent gels are reviewed. In addition, the preparation methods of self-assembly and polymerization of fluorescent gel are also introduced. In this paper, it should be noted that some outstanding research about the fluorescent gels used in sensors, bio-imaging probes, drug delivery, and other application fields is summarized. This work provides useful reference information for further exploration and study of fluorescent hydrogels.

A versatile molecular logic system based on Eu(III) coordination polymer film electrodes combined with multiple properties of NADH

Herein, a new type of lanthanide coordination polymer film made up of europium (Eu(iii)) and poly(N-methacryloylglycine) (Eu(iii)-PMAG) was prepared on an ITO electrode surface driven by the coordination between N-methacryloylglycine (MAG) and Eu(iii) through a single-step polymerization process. The fluorescence signal of Eu(iii)-PMAG films at 617 nm originating from Eu(iii) could be well retained in the buffer solution but was regulated by the concentration of Cu(ii) and the complexing agent EDTA. The switching of fluorescence by Cu(ii) was attributed to the inhibition of the "antenna effect" between Eu(iii) and the MAG ligand in the films. The coexistence of reduced β-nicotinamide adenine dinucleotide (NADH) in the solution can apparently quench the fluorescence of Eu(iii)-PMAG films through the internal filtration effect of UV absorbance overlapping the excitation wavelength, but itself exhibiting a fluorescence emission at 468 nm. In addition, the electrocatalytic oxidation of NADH with the help of the ferrocenedicarboxylic acid (FcDA) probe demonstrated a cyclic voltammetry (CV) signal at 0.45 V (vs. SCE). Based on various reversible stimulus-responsive behaviours, a 4-input/10-output logic network was built using Cu(ii), EDTA, NADH and FcDA as inputs and the signals of fluorescence from Eu(iii)-PMAG (617 nm) and NADH (468 nm), the CV response from FcDA and the UV-vis absorbance from the Cu(ii)-EDTA complex as outputs. Meanwhile, 6 different functional logic devices were constructed based on the same versatile platform, including a 2-to-1 encoder, a 1-to-2 decoder, a 1-to-2 demultiplexer, a parity checker, a transfer gate and a reprogrammable 3-input/2-output keypad lock. Combined with the new type of lanthanide coordination polymer film, NADH played central roles in designing sophisticated computing systems with its fluorescence, UV and electrocatalytic properties. This work might provide a novel avenue to develop intelligent multi-analyte sensing and information processing at the molecular level based on one single platform.

Fluorescent Metallosupramolecular Elastomers for Fast and Ultrasensitive Humidity Sensing

Fluorescent supramolecular polymers that can respond to subtle external stimuli to generate luminescence signals are promising in a wide range of applications, including probes, anti-counterfeiting materials, and sensors. However, complicated preparative procedures, limited responsive speed, and relatively low sensitivity still limit their practical sensing applications. Herein, we report europium-containing metallosupramolecular (PU-Eu) elastomers for fast and ultrasensitive humidity sensing by employing hygroscopic polyurethane (PU), whose urethane groups can coordinate with europium ions (Eu³⁺), emitting a strong luminescent signal by ligand-to-metal energy transfer. The variant of the coordination bond strength triggered by external humidity imparts the PU-Eu elastomer with a fast (∼1.1 s) and ultrasensitive response to the humid condition, where the external humidity increases by ∼1% and the corresponding fluorescence intensity will drop by ∼421.98 a.u. By a dip-coating process, PU-Eu elastomers can be conveniently coated on a hydrophilic and porous cellulose acetate nanofiber membrane, and the resulting composite membrane can achieve real-time and reversible monitoring of environmental humidity and human respiration. Given the versatility of PU-Eu elastomers, this study provides a low-cost and facile route of obtaining fluorescent metallosupramolecular polymers for fast and ultrasensitive humidity sensing.

Thermo-responsive light-emitting metal complexes and related materials

This review discusses the fundamentals and design strategies for the development of thermo-responsive metal–ligand coordination materials and the applications of these materials in temperature sensing, bioimaging, information security, etc.