Design of l-Cysteine Functionalized UiO-66 MOFs for Selective Adsorption of Hg(II) in Aqueous Medium

Current status of advancement in remediation technologies for the toxic metal mercury in the environment: A critical review

Currently, pollution due to heavy metals, in particular dissolved mercury, is a major concern for society and the environment. This work aims to evaluate the current scenario regarding the removal/elimination of mercury. Mercury removal through adsorption is mainly done through artificial resins and metallic-organic frameworks. In the case of the zinc organic framework, it was able to adsorb Hg2+, reaching an adsorption capacity of 802 mg g-1. As for the Hg(0) the coconut husk was found to have the lowest equilibrium time, 30 min, and the highest adsorption capacity of 956.2 mg g-1. Experimental reports and molecular simulation indicate that the adsorption of mercury and other chemical forms occurs due to electrostatic interactions, ion exchange, precipitation, complexation, chelation, and covalent bonds, according to the material nature. The reported thermodynamic results show that, in most cases, the mercury adsorption has an endothermic nature with enthalpy levels below 40 kJ mol-1. Thermal and chemical regeneration methods lead to a similar number of 5 cycles for different materials. The presence of other ions, in particular cadmium, lead, and copper, generates an antagonistic effect for mercury adsorption. Regarding the other current technologies, it was found that mercury removal is feasible through precipitation, phytoremediation, and marine microalgae; all these methods require constant chemicals or a slow rate of removal according to the conditions. Advanced oxidative processes have noteworthy removal of Hg(0); however, Fenton processes lead to mineralization, which leads to Fe2+ and Fe3+ in solution; sonochemical processes are impossible to scale up at the current technology level; and electrochemical processes consume more energy and require constant changes of the anode and cathode. Overall, it is possible to conclude that the adsorption process remains a more friendly, economical, and greener process in comparison with other processes.

Recyclable Fe3O4@UiO-66-PDA core-shell nanomaterials for extensive metal ion adsorption: Batch experiments and theoretical analysis

With the ever-increasing challenge of heavy metal pollution, the imperative for developing highly efficient adsorbents has become apparent to remove metal ions from wastewater completely. In this study, we introduce a novel magnetic core-shell adsorbent, Fe3O4@UiO-66-PDA. It features a polydopamine (PDA) modified zirconium-based metal-organic framework (UiO-66) synthesized through a simple solvothermal method. The adsorbent boasts a unique core-shell architecture with a high specific surface area, abundant micropores, and remarkable thermal stability. The adsorption capabilities of six metal ions (Fe3+, Mn2+, Pb2+, Cu2+, Hg2+, and Cd2+) were systematically investigated, guided by the theory of hard and soft acids and bases. Among these, three representative metal ions (Fe3+, Pb2+, and Hg2+) were scrutinized in detail. The activated Fe3O4@UiO-66-PDA exhibited exceptional adsorption capacities for these metal ions, achieving impressive values of 97.99 mg/g, 121.42 mg/g, and 130.72 mg/g, respectively, at pH 5.0. Moreover, the adsorbent demonstrated efficient recovery from aqueous solution using an external magnet, maintaining robust adsorption efficiency (>80%) and stability even after six cycles. To delve deeper into the optimized adsorption of Hg2+, density functional theory (DFT) analysis was employed, revealing an adsorption energy of -2.61 eV for Hg2+. This notable adsorption capacity was primarily attributed to electron interactions and coordination effects. This study offers valuable insights into metal ion adsorption facilitated, by magnetic metal-organic framework (MOF) materials.

Cysteamine-Anchored MOF through Post-Synthetic Modification Strategy for the Effective Removal of Mercury from Water

The introduction of cysteamine functionality, referred to as Q-ZIF-67-SH, was successfully achieved through postsynthetic modification while maintaining the structural and thermal stability of the quasi metal-organic framework Q-ZIF-67. By subjecting ZIF-67 to controlled partial deligandation at 310 °C under an air atmosphere, a substantial number of unsaturated cobalt sites were generated within the quasi ZIF-67 (Q-ZIF-67) structure. These unsaturated cobalt sites facilitated effective coordination with cysteamine, resulting in the development of the thiol-functionalized framework Q-ZIF-67-SH. The potential of these metal-organic frameworks (MOFs) for the adsorptive removal of hazardous Hg(II) was investigated. Various factors, such as the type of sorbent, pH, adsorbent dosage, initial concentration of Hg(II), and presence of coexisting ions, were thoroughly examined and comprehensively explained. Thiol-anchored MOF significantly enhanced the efficiency of Hg(II) removal, achieving an impressive removal rate of up to 99.2%. Furthermore, it demonstrated a maximum adsorption capacity of 994 mg g-1 and a distribution coefficient of 2.5 × 106 mL g-1. A good correspondence with pseudo-second-order kinetics and the Langmuir model was observed through the fitting of adsorption kinetics and the isotherm model. The thermodynamic data strongly indicate that the adsorptive removal of Hg(II) is characterized by endothermicity and spontaneity. This signifies that the process is energetically favorable and has potential for efficient Hg(II) removal. Therefore, the Q-ZIF-67-SH sorbent emerges as a promising and advantageous option for the removal of Hg(II) from water.

Revealing the interaction forms between Hg(II) and group types (-Cl, -CN, -NH2, -OH, -COOH) in functionalized Poly(pyrrole methane)s for efficient mercury removal

To explore the impact of different functional groups on Hg(II) adsorption, a range of poly(pyrrole methane)s functionalized by -Cl, -CN, -NH2, -OH and -COOH were synthesized and applied to reveal the interaction between different functional groups and mercury ions in water, and the adsorption mechanism was revealed through combined FT-IR, XPS, and DFT calculations. The adsorption performance can be improved to varying degrees by the incorporation of functional groups. Among them, the oxygen-containing functional groups (-OH and -COOH) exhibit stronger affinity for Hg(II) and can increase the adsorption capacity from 180 mg g-1 to more than 1400 mg g-1 at 318 K, with distribution coefficient (Kd) exceeding 105 mL g-1. The variations in the capture and immobilization capabilities of functionalized poly(pyrrole methane)s predominantly stem from the unique interactions between their functional groups and mercury ions. In particular, oxygen-containing -OH and -COOH effectively capture Hg(OH)2 through hydrogen bonding, and further deprotonate to form the -O-Hg-OH and -COO-Hg-OH complexes which are more stable than those obtained from other functionalized groups. Finally, the ecological safety has been fully demonstrated through bactericidal and bacteriostatic experiments to prove the functionalized poly(pyrrole methane)s can be as an environmentally friendly adsorbent for purifying contaminated water.

In situ growth of Zr-based metal-organic frameworks on cellulose sponges for Hg2+ and methylene blue removal

Metal-organic frameworks (MOFs) are characterised by high porosity levels and controllable structures, making them ideal adsorbents for wastewater. However, obtaining substrate materials with mechanical stability, excellent pore accessibility, and good processability for compositing MOF crystal powders to adsorb multiple pollutants in complex aqueous environments is challenging. In this study, porous MOFs@ modified cellulose sponge (MCS) composites were fabricated using MCS as a scaffold to provide anchoring sites for the coordination of Zr4+ ions and further in situ synthesis of MOFs, namely UiO-66@MCS and UiO-66-NH2@MCS, which effectively removed heavy metal ions and organic dyes. MOFs@MCS composites exhibit excellent water and dimensional stability, maintaining the pore structure by ambient drying during reuse. Compared with UiO-66@MCS composite, UiO-66-NH2@MCS composite exhibited a higher adsorption capacity of 224.5 mg·g-1 for Hg2+ and 400.9 mg·g-1 for methylene blue (MB). The adsorption of Hg2+ onto the MOFs@MCS composites followed the Langmuir and pseudo-second-order models, whereas the Freundlich and pseudo-second-order models were more suitable for MB adsorption. Moreover, the MOFs@MCS composites exhibited excellent reusability and were selective for the removal of Hg2+. Overall, this approach effectively combines Zr-based MOFs with mechanically and dimensionally stable porous cellulose sponges, rendering the approach suitable for purifying complex wastewater.

In Situ Synthesis of NH2-MIL-53-Al/PAN Nanofibers for Removal Co(II) through an Electrospinning Process

In this study, researchers developed a novel composite material called NH2-MIL-53-Al/PAN, which consists of metal-organic frameworks (MOFs) grown on electrospun PAN nanofibers (NFs). The successful formation of the composite was confirmed by X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and the hydrophilicity of NH2-MIL-53-Al/PAN was demonstrated by the water contact angle (WCA). Batch experiments were conducted to investigate the adsorption performance of Co(II) under different conditions. The maximum adsorption capacity reached 58.72 mg/g, and almost 95% of the adsorption was achieved within the first 6 h. The adsorption process was found to be spontaneous and endothermic and followed the pseudo-second-order kinetics and Langmuir models. Chemisorption and molecular layer adsorption are the main mechanisms of adsorption, and X-ray photoelectron spectroscopy (XPS) analysis further reveals that the interaction between the adsorbent and cobalt is a coordination interaction. In this study, NH2-MIL-53-Al was grown in situ on PAN to ensure effective loading of MOFs and prevent agglomeration during the NF mixing process. This approach successfully addressed the challenge of exposing active sites within the embedded MOF crystals. Additionally, it overcame the difficulty of recycling traditional MOF adsorbents. As a result, the exceptional performance of MOF NFs offers a promising solution for the efficient removal of cobalt-containing wastewater.

Synthetic of functionalized magnetic titanium-based metal-organic frameworks to efficiently remove Hg(Ⅱ) from wastewater

The rapid development of process technology has led to rapid daily industrial production, which also produced a large amount of waste liquid. At the same time, the existing treatment technology cannot keep up with the demand, resulting in the malicious destruction of the environment by wastewater, especially mercury-containing wastewater was very harmful. Effective means of removing mercury ions need to be found. With magnetic ferric oxide as the core and titanium-based metal-organic frameworks as the shell, a new type of magnetic adsorbent (BTA-MIL-125(Ti)@Fe3O4) was synthesized. Materials were tested by multiple characterization methods and multiple sets of experiments. At optimal pH 6, the removal rate in 100 ppm Hg(Ⅱ) was as high as 95.8%. The theoretical adsorption capacity was 615 mg/L. Isothermal experiments, kinetic experiments and thermodynamic experiments have respectively verified that the material was a kind of adsorption material with self-emission heat based on chemical action and synergistic adsorption with Hill model. By simulating the immunity of a variety of ions (Cu, Zn, Mg, Ni, Cd), the material itself also exhibited a very high affinity for Hg(Ⅱ). The results of five high-cycle stable adsorption proved the repeatable stability of the material itself. Various characterization methods have also shown that nitrogen and sulfur-containing groups chelated with Hg(Ⅱ). All of the above was enough to show that the BTA-MIL-125(Ti)@Fe3O4 was a magnetic adsorption material with excellent performance and great prospects.

Selective adsorption of mercury ion from water by a novel functionalized magnetic Ti based metal-organic framework composite

In the context of industrialization and severe wastewater pollution, mercury ions pose a major threat due to their high toxicity. However, traditional adsorbents and common metal-organic framework (MOF) materials have limited effectiveness. This study focuses on combining magnetic materials with functionalized titanium-based MOF composite (SNN-MIL-125(Ti)@Fe3O4) to improve mercury ion adsorption. Through comprehensive characterization and analysis, the adsorption performance and mechanism of the material were studied. The optimal adsorption of the material was achieved at pH 5, exhibiting a pseudo-second-order adsorption model and the Hill theoretical capacity of 668.98 mg/g. Hill and Tempkin models confirmed the presence of chemical and physical adsorption sites on the material surface. Thermodynamic experiments showed a spontaneous endothermic process. Despite the presence of interfering ions, the material exhibited high selectivity for mercury ions. After four cycles, adsorption performance decreased by only 8%, indicating excellent reusability. Nitrogen- and sulfur-containing functional groups played a key role in mercury ion adsorption. In conclusion, SNN-MIL-125(Ti)@Fe3O4, as a magnetic MOF adsorption material, showed potential for effective remediation of mercury-contaminated wastewater. This study contributes to the development of efficient adsorption materials and enhances the understanding of their mechanism.

One-Pot Pretreatment Coupled to Microplasma Optical Emission Spectrometry for Field and Sensitive Determination of Inorganic Mercury and Methylmercury in Fish

Field and sensitive analysis of mercury species in seafood is helpful to assess the risk of human exposure to mercury, but the cumbersome pretreatment process is time-consuming and laborious. Herein, a simple one-pot pretreatment system is designed for extraction, separation, and enrichment of inorganic mercury (Hg(II)) and methylmercury (MeHg) in fish, and coupled to dielectric barrier discharge (DBD) microplasma optical emission spectrometry (OES). Both Hg(II) and MeHg species in fish can be effectively extracted by tetramethylammonium hydroxide under ultrasound, then separated from the fish matrix by vapor generation and photochemical vapor generation, and finally enriched on the activated carbon electrode tips. Mercury trapped on the activated carbon electrode tips can be rapidly released to produce OES under the DBD microplasma excitation for quantitative analysis. The pretreatment and analysis of a batch of 12 samples are completed within 50 min, and the extraction efficiency of total mercury is up to 90% for 100 mg of freeze-dried fish or 86% for 1 g of fresh fish. Under the optimized conditions, the detection limits are 2 μg kg^-1 for Hg(II) and 1.2 μg kg^-1 for MeHg in freeze-dried fish, and precisions are 3.2% for Hg(II) and 3.9% for MeHg. The present method is applied to the analysis of the certified reference material and real marine fishes, giving rise to spiked recoveries of 95-103%. The present system hardly leads to MeHg and Hg(II) transforming into each other during extraction, providing a simple, convenient, and low-cost analytical tool to evaluate the risk of mercury species in fish.

Postsynthetic Modification of Core-Shell Magnetic Covalent Organic Frameworks for the Selective Removal of Mercury

Core-shell magnetic covalent organic framework (COF) materials were prepared, followed by shell material functionalization with different organic ligands, including thiosemicarbazide, through a postsynthetic modification approach. The structures of the prepared samples were characterized with various techniques, including powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET) method, thermogravimetric analysis (TGA), photoinduced force microscopy (PiFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and solid ¹³C NMR. PXRD and BET studies revealed that the crystalline and porous nature of the functionalized COFs was well maintained after three steps of postsynthetic modification. On the other hand, solid ¹³C NMR, TGA, and PiFM analyses confirmed the successful functionalization of COF materials with good covalent linkage connectivity. The use of the resulting functionalized magnetic COF for selective and ultrafast adsorption of Hg(II) has been investigated. The observations displayed rapid kinetics with adsorption dynamics conforming to the quasi-second-order kinetic model and the Langmuir adsorption model. Furthermore, this prepared crystalline magnetic material demonstrated a high Langmuir Hg(II) uptake capacity, reaching equilibrium in only 5 min. Thermodynamic calculations proved that the adsorption process is endothermic and spontaneous.

Microwave-Assisted Rapid Substitution of Ti for Zr to Produce Bimetallic (Zr/Ti)UiO-66-NH2 with Congenetic "Shell-Core" Structure for Enhancing Photocatalytic Removal of Nitric Oxide

Efficient nitric oxide (NO) removal without nitrogen dioxide (NO₂ ) emission is desired for the control of air pollution. Herein, a series of (Zr/Ti)UiO-66-NH₂ with congenetic shell-core structure, denoted as Ti-UION, are rapidly synthesized by microwave-assisted post-synthetic modification for NO removal. The optimal Ti-UION (i.e., 2.5Ti-UION) exhibits the highest activity of 80.74% without NO₂ emission with moisture, which is 21.65% greater than that of the UiO-66-NH₂ . The NO removal efficiency of 2.5Ti-UION further increases to 95.92% without photocatalyst deactivation under an anhydrous condition. This is because selectively produced NO₂ in photocatalysis is completely adsorbed into micropores, refreshing active sites for subsequent reaction. In addition, the enhanced photocatalytic activity after Ti substitution is due to the presence of Ti electron acceptor, the potential difference between the shell and core of Ti-UION crystal, and the high conductivity of TiO units. Additionally, the improved adsorption of gas molecules not only favors NO oxidation, but also avoids the emission of NO₂ . This work provides a feasible strategy for rapid metal substitution in metal-organic frameworks and insights into enhanced NO photodegradation.

An in-situ strategy to construct uracil-conjugated covalent organic frameworks with tunable fluorescence/recognition characteristics for sensitive and selective Mercury(II) detection

Previous researches of covalent organic frameworks (COFs) have shown their potential as fluorescent probes, but the regulation of their optical properties and recognition characteristics still remains a challenge, and most of reports required complicated post-decoration to improve the sensing performance. In this context, we propose a novel in-situ strategy to construct uracil-conjugated COFs and modulate their fluorescence properties for sensitive and selective mercury(II) detection. By using 1,3,6,8-tetrakis(4-formylphenyl)pyrene (TFPPy) and 1,3,6,8-tetrakis(4-aminophenyl)pyrene (TAPPy) as fundamental blocks and 5-aminouraci (5-AU) as the functional monomer, a series of COFs (Py-COFs and Py-U-COFs-1 to Py-U-COFs-5) with tunable fluorescence were solvothermally synthesized through an in-situ Schiff base reaction. The π-conjugated framework serves as a signal reporter, the evenly and densely distributed uracil acts as a mercury(II) receptor, and the regular pores (channels) make the rapid and sensitive detection of the mercury(II) possible. In this research, we manage to regulate the crystalline structure, the fluorescence properties, and the sensing performance of COFs by simply changing the molar ratio of precursors. We expect this research to open up a new strategy for effective and controllable construction of functionalized COFs for environmental analysis.

Development of composite optical waveguide based on azobenzene-modified titanium metal-organic framework film for study of gas adsorption kinetics

This study investigates the fabrication and gas adsorption kinetics of an azobenzene (AZB)-modified titanium metal-organic framework (AZB@Ti-MOF) film composite optical waveguide (COWG) that recognizes ethylenediamine (EDA) gas. After modification with AZB, the surface of the Ti-MOF film became rough and evolved from a hemispherical structure to a petal-like structure; a large pore size and small specific surface area accompanied the evolution of the surface morphology. The AZB@Ti-MOF film COWG exhibited a positive response to EDA gas co-existing with the same concentration (1000 ppm) of benzenes, amines, and acidic gases. It is postulated that charge transfer occurs when the AZB@Ti-MOF film COWG adsorbs EDA gas, leading to significant strengthening of the intramolecular hydrogen bonds as EDA works as an electron donor. Incomplete or prolonged EDA desorption from the film surface at room temperature resulted in a decrease in the surface sensitivity of the COWG AZB@Ti-MOF film. The kinetics of EDA adsorption were examined using pseudo-first-order and pseudo-second-order (PSO) kinetic models. The EDA adsorption kinetics fit well with the PSO model. As measured at room temperature, the adsorption capacity (q_e) per unit surface of the AZB@Ti-MOF films was 46.50 × 10^-2 µg·cm^-2.

Removal of Hg2+ in wastewater by grafting nitrogen/sulfur-containing molecule onto Uio-66-NH2: from synthesis to adsorption studies

The remediation of heavy metal deserves to be on the agenda, with the adsorbent design bearing the brunt of it. In this study, the molecule (4, 6-diamino-2-mercaptopyrimidine, DMP) containing thiol (-SH) and amino (-NH₂) functional groups was grafted onto Uio-66-NH₂, and a composite metal-organic framework nanomaterial (Zr(NH₂)-DMP) was synthesized via a facile post-modification scheme. The morphological characteristics and structural features of the modified adsorbent were characterized by XRD, FT-IR, FE-SEM, EDS, BET, and XPS. The characterization results verified that the post-modification scheme was successfully achieved. The adsorption experiments were carried out to investigate the removal performance of the Zr(NH₂)-DMP towards Hg²⁺ under different influencing parameters. The maximum adsorption capacity of 389.4 mg/g was obtained, and the adsorption equilibrium was achieved within 30 min at pH 6 at room temperature. Adsorption thermodynamic study indicated that the adsorption process was exothermic and spontaneous. The Zr(NH₂)-DMP exhibited excellent selectivity for Hg²⁺, and also has the potential to remove Cu²⁺, Fe²⁺, and Zn²⁺ ions. The introduction of Cl^- inhibited the removal of Hg²⁺ due to the formation of mercuric chlorides (removal efficiency reduced from 97.8 to 95.6%). The removal efficiency of up to 86.7% was obtained after four cycles. The Langmuir isotherm and Pseudo-second kinetic were more suitable for fitting the adsorption process of Hg²⁺ by Zr(NH₂)-DMP. The main removal mechanism could be attributed to the chelation between Hg²⁺ (soft acid) and nitrogen/sulfur (soft base) elements. These findings convinced that the successful synthesis of Zr(NH₂)-DMP provides an option for Hg²⁺ removal from wastewater.

Selective mercury adsorption and enrichment enabled by phenylic carboxyl functionalized poly(pyrrole methane)s chelating polymers

Mercury decontamination from water requires highly effective and efficient methods for maintaining public health and environmental protection. Herein, based on the coordination theory between functional groups and metal ions, we proposed phenylic carboxyl group-based poly(pyrrole methane)s (PPDCBAs) as highly efficient mercury removal materials for environmental remediation applications. It was found that PPDCBAs can efficiently adsorb and remove mercury(II) from aqueous solutions by functionalizing the molecular structure with phenylic carboxyl groups. Among the as-prepared PPDCBAs, poly[pyrrole-2, 5-diyl (4-carboxybenzylidane)] (PPD4CBA) with the carboxyl group at the para position can not only adsorb mercury over 1400 mg⋅g^-1 but also achieve a 92.5 % mercury(II) uptake within 100 min by a very low dosage of 0.1 g⋅L^-1. In addition, PPDCBAs exhibited excellent adsorption selectivity for mercury(II) compared with copper(II), cadmium(II), zinc(II) and lead(II). Furthermore, as determined by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and the density functional theory (DFT) calculation, the mercury removal was found to be mainly dependent on the high density of chelating sites, the phenylic carboxyl moieties, which helped us to realize an ultra-trace amount mercury removal (from 10.8 μg⋅L^-1 to 0.6-0.8 μg⋅L^-1) for meeting drinking water standard requirements (1.0 μg⋅L^-1).

Accurate Determination of Trace Cadmium in Soil Samples with Graphite Furnace Atomic Absorption Spectrometry Using Metal-Organic Frameworks as Matrix Modifiers

Cadmium (Cd) is a highly toxic heavy metal that is widely distributed in soils at low concentrations. Its volatilization loss occurs at an ashing temperature higher than 350 °C. Accordingly, the accurate determination of its concentration in soils often requires the addition of chemical modifiers by graphite furnace atomic absorption spectrometry (GFAAS) to improve the thermal stability of Cd. In this work, a metal-organic framework (MOF, UIO-66-NH₂) was utilized as a matrix modifier to improve accuracy in determining Cd in soils using GFAAS. The Cd signal, as influenced by drying and pyrolysis temperature and special gas, was also investigated, and the measuring conditions were optimized (2 μg L^-1 Cd concentrations, matrix modifier: UIO-66-NH₂, pyrolysis temperature: 550 °C, atomization temperature: 1650 °C, and special gas: air). The limit of detection (LOD) and the characteristic mass for Cd in soil were 3.84 ng g^-1 and 0.80 pg, respectively. Five soil standard reference materials (SRMs) were analyzed for Cd to verify the effectiveness of the optimized measuring conditions. The soil Cd concentrations obtained were in remarkable agreement with the reference values. Moreover, the mechanism of UIO-66-NH₂ on the graphite platform was investigated in the drying and pyrolysis steps by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). During the drying steps, many functional groups of the matrix were activated, and Cd²⁺ could be captured on its surface. After the pyrolysis step, the structure matrix collapsed and was partially decomposed into ZrO₂, and subsequently, an intermediate state of ZrO₂-(CdO) appeared at high temperatures, which came from the active binding sites on the zirconium oxide octahedron nodes.

Selective removal of Hg(II) by UiO-66-NH2 modified by 4-quinolinecarboxaldehyde: from experiment to mechanism

In wastewater, heavy metal Hg causes serious harm to ecology, so it needs to be removed. In this paper, a novel MOF adsorbent (UiO-66-QU) was prepared by modifying UiO-66-NH₂ with 4-quinolinecarboxaldehyde, which was used to selectively remove Hg(II) from water. The adsorbent was characterized using Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), zeta potentiometer, and X-ray photoelectron spectroscopy (XPS). In order to investigate the Hg(II) adsorption performance of UiO-66-QU, the effect of time, initial concentration, pH, and temperature were carried out. Langmuir model fitting shows that the maximum adsorption capacity of UiO-66-QU for Hg(II) is 556 mg/g at 298 K. The experimental results show that UiO-66-QU has better Hg(II) adsorption capacity than UiO-66-NH₂. The isotherm is in accordance with pseudo-second-order models. It is indicated that the adsorption process is mainly monolayer chemical adsorption. The thermodynamic parameters also indicate that the adsorption process is spontaneous and endothermic. It has excellent reusability and selectivity. XPS and the zeta potential showed that the adsorption mechanism was the complex reaction of Hg(II) with nitrogenous group. Therefore, the adsorbent has potential application prospects in removal of Hg(II) from wastewater.

MOF@biomass hybrids: Trends on advanced functional materials for adsorption

This contribution aims to demonstrate the scope of new hybrids between biomass and metal-organic frameworks (MOF@biomass) used in the adsorption process of pollutants. After a brief presentation of the use of the main series of MOFs as efficient adsorbents for different types of pollutants, the limitations of these structures related to particle size and hydrodynamic problems during their application are highlighted. Lignocellulosic biomasses are also recognized as an alternative adsorbent, mainly due to their high natural abundance and their low environmental impact during and after their application. The limited capacity of bioadsorbents becomes important in this research. Consequently, the largest amount of information existing in the last ten years on MOF-Biomass functionalization as a hybrid and improvement technology for adsorption processes is compiled, analyzed, compared and contrasted. So far, there is no evidence of works that exploit the concept of functionalization of adsorbents of different nature to give rise to new hybrid materials. Through this review it was found that the hybrids obtained show a higher adsorption capacity (Qe) compared to their precursors, due to the increase of organic functional groups provided by the biomass. Thus, for heavy metals, dyes, Arsenium anions and other organic and pharmaceutical compounds, there are increases in Qe of about 100 mg g^-1. The possibility of the new hybrid being studied for desorption and reuse processes is also raised, resulting in a new line of research that is attractive for the industry from an economic and environmental point of view. The functionalization methods and techniques used in the studies cited in this article are outlined. In conclusion, this research brings a new horizon of study in the field of adsorption and mentions the main future challenges related to new sustainable applications.

Systematic Modulation of Thiol Functionalities in Inexpensive Porous Polymers for Effective Mercury Removal

Through accumulation, mercury contamination in aquatic systems still poses serious health risks despite the strict regulations on drinking water and industrial discharge. One effective strategy against this is adsorptive removal, in which a suitably functionalized porous material is added to water treatment protocols. Thiol (SH) group-grafted structures perform commendably; however, insufficient attention is paid to the cost, scalability, and reusability or how the arrangement of sulfur atoms could affect the Hg^II binding strength. We used an inexpensive and scalable porous covalent organic polymer (COP-130) to systematically introduce thiol functional groups with precise chain lengths and sulfur content. Thiol-functionalized COP-130 demonstrates enhanced wettability and excellent Hg^II uptake of up to 936 mg g^-1 , with fast kinetics and exceptionally high selectivity. These Hg adsorbents are easily regenerated with HCl and can be used at least six times without loss of capacity even after treatment with strong acid, a rare performance in the domain of Hg-removal research.

Metal-Organic Frameworks and Their Composites for Environmental Applications

From the point of view of the ecological environment, contaminants such as heavy metal ions or toxic gases have caused harmful impacts on the environment and human health, and overcoming these adverse effects remains a serious and important task. Very recent, highly crystalline porous metal-organic frameworks (MOFs), with tailorable chemistry and excellent chemical stability, have shown promising properties in the field of removing various hazardous pollutants. This review concentrates on the recent progress of MOFs and MOF-based materials and their exploit in environmental applications, mainly including water treatment and gas storage and separation. Finally, challenges and trends of MOFs and MOF-based materials for future developments are discussed and explored.

Removal of methyl orange wastewater by Ugi multicomponent reaction functionalized UiO-66-NS

The efficient and rapid removal of organic dyes from wastewater remains a complex and challenging task. In this study, UiO-66-NH₂ was prepared by solvothermal synthesis, and then, UiO-66-NS was prepared by compounding L-cysteine with UiO-66-NH₂ via the Ugi reaction for the efficient removal of methyl orange. UiO-66-NS was prepared by the addition of 1 mmol L-cysteine and showed good adsorption of methyl orange with 92.00% removal. Pseudo-second-order kinetics and Langmuir isotherms more accurately described the adsorption process of UiO-66-NS on methyl orange, which indicated that the adsorption process was dominated by monolayer adsorption of chemical reactions, and the maximum adsorption amounts of UiO-66-NS on methyl orange were 242.72 mg/g at 298 K. In addition, UiO-66-NS exhibited ultrahigh stability in acidic, neutral, and alkaline media (pH = 3-10), but its adsorption of methyl orange after 5 cycles was only 59.53% of the maximum adsorption amount. The adsorption mechanism is primarily electrostatic adsorption of UiO-66-NS with methyl orange, hydrogen bonding, and π-π interactions. This atomically economical Ugi multicomponent reaction provides new ideas for the preparation of structurally designable adsorbents with excellent performance.

Impact of industrial effluents on the environment and human health and their remediation using MOFs-based hybrid membrane filtration techniques

The hazardous risk posed by industrial effluent discharge into the ecosystem has raised a plethora of environmental issues, public health, and safety concerns. The effluents from industries such as tanning, leather, petrochemicals, pharmaceuticals, and textiles are create significant stress on the aquatic ecosystem, which induces significant toxicity, involved in endocrine disruptions, and inhibits reproductive functions. Therefore, this review presented an overall abridgment of the effects of these effluents and their ability to synergize with modern pollutants such as pharmaceuticals, cosmetic chemicals, nanoparticles, and heavy metals. We further emphasize the metal organic framework (MOF) based membrane filtration approach for remediation of industrial effluents in comparison to the traditional remediation process. The MOF based-hybrid membrane filters provide higher reusability, better adsorption, and superior removal rates through the implication of nanotechnology, while the traditional remediation process offers poorer filtration rates and stability.

Dual functional sites strategies toward enhanced heavy metal remediation: Interlayer expanded Mg-Al layered double hydroxide by intercalation with L-cysteine

The discharge of toxic heavy metals poses a serious threat to human health and environment. The existing water purification systems are lack of promising materials for rapid, efficient, and cost-efficient remediation of numerous toxic heavy metals. Herein, we report on the development of L-cysteine (Cys) intercalated Mg-Al layered double hydroxide (MgAl-LDH/Cys) with a loose lamellar porous architecture as an efficient and economically viable adsorbent for Pb(II) and Cd(II) removal. The intercalation with Cys creates dual functionality, i.e., the interlayer expansion accelerates the diffusion of heavy metals, while Cys acts as additional capture sites for heavy metals. Therefore, remarkable high maximum sorption capacities of 279.58 and 135.68 mg g^-1 for Pb(II) and Cd(II) were obtained for MgAl-LDH/Cys compared to those for pristine MgAl-LDH (30.15 and 36.77 mg g^-1). MgAl-LDH/Cys exhibits also much faster sorption kinetics in comparison with MgAl-LDH. Such enhancements are attributed to the intercalation of the chelating agent Cys in the MgAl-LDH interlayer channels. Moreover, it is proposed that the adsorption mechanisms involve the isomorphous replacement of Mg sites by Cd(II) forming CdAl-LDH, the precipitation of PbS and CdS, and the chelation of sulfhydryl, carboxyl and amine groups toward Cd(II). Altogether, its facile and environmentally friendly fabrication, ultrahigh sorption efficiencies, and rapid kinetics demonstrate that MgAl-LDH/Cys has potential for practical applications in heavy metal remediation.

"Lighting-up" methylene blue-embedded zirconium based organic framework triggered by Al3+ for advancing the sensitivity of E. coli O157:H7 analysis in dual-signal lateral flow immunochromatographic assay

The sensitive detection of foodborne pathogens is of great significance for ensuring food safety and quality. Herein, on the basis of methylene blue-embedded zirconium based organic framework (UIO@MB) as the remarkable capture carrier and signal indicator, with the Al³⁺-assisted the fluorescent signal response, we developed a label-free and dual-signal lateral flow immunochromatographic assay (LDLFIA) for sensitive detection of Escherichia coli (E. coli) O157:H7. The UIO@MB sensing carrier without monoclonal antibodies (mAbs) was manufactured, which adhered to bacteria to form the UIO@MB-E. coli O157:H7 conjugate, resulting in visible blue band. Then the fluorescent response of the OH-rich UIO@MB was excited by introducing Al³⁺, arising from capturing of Al³⁺ by -OH through coordination and electrostatic affinity, thus generating a green fluorescent band. Impressively, a smartphone-based portable reading system was developed that can reflect the test results of UIO@MB-LDLFIA immediately. Under optimum conditions, UIO@MB-LDLFIA can complete colorimetric and fluorescent mode detection within 90 min, with a detection sensitivity of 10³ CFU/mL, which were 100 times lower than traditional gold nanoparticles-based LFIA and polymerase chain reaction (PCR). Moreover, the feasibility of the method was further evaluated by the determination of E. coli O157: H7 in drinking water and cabbage with average recoveries of 85.1-123.0%.

Highly compressible nanocellulose aerogels with a cellular structure for high-performance adsorption of Cu(II)

Cellulose-based aerogels have considerable potential for various application due to renewable, low cost, and high availability. However, mechanical robustness and functionalization remain major challenges. Here, we synthesized a compressible, recoverable cellulose nanofiber (CNF)/carboxymethyl cellulose (CMC)/branched polyethyleneimine (BPEI) aerogel via electrostatic-modulated interfacial covalent crosslinking and freeze-drying process. The porous BPEI@CNF/CMC aerogel possessed excellent mechanical compression and high-density metal-chelating groups, which exhibited fast adsorption kinetics and high adsorption capacity (452.49 mg g^-1) in static copper adsorption process. Furthermore, BPEI@CNF/CMC aerogels displayed excellent recyclability and could still reach 85% after 10 cycles. The integrated analyses of ATR-FTIR and XPS suggested that the predominant adsorption mechanism included electrostatic interaction, ion-exchange and chelation. This strategy provides a sustainable route to fabricate efficient biomass-based adsorbents for selective copper removal from water.

Superselective Hg(II) Removal from Water Using a Thiol-Laced MOF-Based Sponge Monolith: Performance and Mechanism

Point-of-use (POU) devices with satisfying mercury (Hg) removal performance are urgently needed for public health and yet are scarcely reported. In this study, a thiol-laced metal-organic framework (MOF)-based sponge monolith (TLMSM) has been investigated for Hg(II) removal as the POU device for its benchmark application. The resulting TLMSM was characterized by remarkable chemical resistance, mechanical stability, and hydroscopicity (>2100 wt %). Importantly, the TLMSM has exhibited high adsorption capacity (∼954.7 mg g^-1), fast kinetics (k_f ∼ 1.76 × 10^-5 ms^-1), broad working pH range (1-10), high selectivity (K_d > 5.0 × 10⁷ mL g^-1), and excellent regeneration capability (removal efficiency >90% after 25 cycles). The high applicability of TLMSM in real-world scenarios was verified by its excellent Hg(II) removal performance in various real water matrices (e.g., surface waters and industrial effluents). Moreover, a fixed-bed column test demonstrated that ∼1485 bed volumes of the feeding streams (∼500 μg L^-1) can be effectively treated with an enrichment factor of 12.6, suggesting the great potential of TLMSM as POU devices. Furthermore, the principal adsorption complexes (e.g., single-layer -S-Hg-Cl and double-layer -S-Hg-O-Hg-Cl and -S-Hg-O-Hg-OH) formed during the adsorption process under a wide range of pH were synergistically and systematically unveiled using advanced tools. Overall, this work presents an applicable approach by tailoring MOF into a sponge substrate to achieve its real application in heavy metal removal from water, especially for Hg(II).

Polypyrrole-Bentonite composite as a highly efficient and low cost anionic adsorbent for removing hexavalent molybdenum from wastewater

The aim of current study was to develop a new material for the fast and efficient removal of hexavalent molybdenum (Mo(VI)) from contaminated water. In this work, a novel adsorbent was synthesized through the polypyrrole intercalation modification of bentonite (PPy-BT) via in-situ chemical polymerization method for effectively removal of Mo(VI) from aqueous solution. The surface morphology and chemical composition of PPy-BT composites were investigated by X-ray diffraction, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectrometer, scanning electron microscopy techniques and X-ray photoelectron spectroscopy. PPy and BT could well resist the aggregation of each other, and therefore resulted in a loose-packed structure and good exposure of active sites. Using materials for the adsorption of Mo(VI) revealed has a maximum adsorption capacity of 100.17 mg/g at 25 °C and pH 4.0 by the Langmuir model. The adsorption kinetics and isotherm data are found to be well elucidated through pseudo-second-order and Langmuir models. Moreover, high regeneration ability (>89.3%) of PPy-BT was noted for five consecutive adsorption-desorption cycles. These findings highlight the potential of PPy-BT for practical water treatment applications. The intercalation material of PPy-BT could provide a new strategy to develop cost-effective clay-based nanomaterials for wastewater treatment.

Regulation of conjugate rigid plane structures for achieving transformation of fluorescence recognition properties

Regulation of a conjugate rigid plane structure based on bisbenzimidazole derivatives to research the structure-effective relationship between conjugate systems size and fluorescence sensing properties.

IL-functionalized Mn(ii)-doped core–shell Fe3O4@Zr-MOF nanomaterials for the removal of MB from wastewater based on dual adsorption/Fenton catalysis

IL-functionalized Mn(ii)-doped core–shell Fe3O4@Zr-MOF nanomaterials were fabricated for the removal of MB from wastewater based on dual adsorption/Fenton catalysis.

Amyloid Fibril Templated MOF Aerogels for Water Purification

Design and fabrication of versatile adsorbents for universal water purification following green chemistry principles remain challenging. Here, it is shown that amyloid fibrils from protein waste can be used as a functional scaffold for metal organic framework (MOF) biomimetic mineralization. The resulting amyloid fibrils/ZIF-8 hybrid aerogels can effectively remove nine different heavy metal ions from water due to their hierarchical porous structure. Importantly, amyloid fibrils/ZIF-8 hybrid aerogels can efficiently remove Hg²⁺ and Pb²⁺ from water over five consecutive adsorption-regeneration cycles. Furthermore, a dual removal pathway of adsorption and catalytic degradation is observed in the synthetic dyes, indicating that the aerogel preserves its porous nature and maintains the integrity of versatile functional ligands within ZIF-8. Finally, it is shown that these hybrid aerogels can also perform successfully in oil-water separation. Considering the facile synthesis procedure, high removal efficiency, affordable cost, and regeneration possibilities, the amyloid fibrils/ZIF-8 hybrid aerogel stands as an ideal candidate for addressing open challenges in wastewater treatment and water purification.

Applications of water-stable metal-organic frameworks in the removal of water pollutants: A review

Because the pollutants produced by human activities have destroyed the ecological balance of natural water environment, and caused severe impact on human life safety and environmental security. Hence the task of water environment restoration is imminent. Metal-organic frameworks (MOFs), structured from organic ligands and inorganic metal ions, are notable for their outstanding crystallinity, diverse structures, large surface areas, adsorption performance, and excellent component tunability. The water stability of MOFs is a key requisite for their possible actual applications in separation, catalysis, adsorption, and other water environment remediation areas because it is necessary to safeguard the integrity of the material structure during utilization. In this article, we comprehensively review state-of-the-art research progress on the promising potential of MOFs as excellent nanomaterials to remove contaminants from the water environment. Firstly, the fundamental characteristics and preparation methods of several typical water-stable MOFs include UiO, MIL, and ZIF are introduced. Then, the removal property and mechanism of heavy metal ions, radionuclide contaminants, drugs, and organic dyes by different MOFs were compared. Finally, the application prospect of MOFs in pollutant remediation prospected. In this review, the synthesis methods and application in water pollutant removal are explored, which provide ways toward the effective use of water-stable MOFs in materials design and environmental remediation.

Ultralight and shapeable nanocellulose/metal-organic framework aerogel with hierarchical cellular architecture for highly efficient adsorption of Cu(II) ions

Water contamination by heavy metal pollutants is a global concern due to detrimental effects on the environment and human health. Regenerable, high-performance heavy metal sorbents are urgently demanded for improved water purification. Herein, we present an elegant strategy of interweaving metal-organic framework (MOF-808-ethylene diamine tetraacetic acid) and TEMPO-oxidized cellulose nanofibers (TCNF) to construct freeways in hybrid aerogels for rapid and efficient transport and capture of heavy metal ions. In this strategy, a postsynthetic ligand exchange approach is applied to introduce ordered and high-density accessible binding sites for metal ions. The prepared aerogels show excellent shapeability, ultralow density less than 0.005 g cm^-3, and high hierarchical porosity of 99.82%. Furthermore, benefiting from the abundant chelating groups and accessible surface areas, these aerogels exhibit outstanding uptake capacity of 300 mg g^-1 and rapid adsorption kinetics of 0.031 mg g^-1 h^-1 for Cu(II) ions, significantly better than conventional TCNF aerogels. The aerogels could be easily regenerated at least five cycles without greatly performance loss. These aerogels could effectively remove diverse heavy metal ions from complicated contaminated water. Thus, this work provides a novel method to synthesize environmental-friendly, regenerable, and high-performance adsorption materials for water remediation.

Nanozymes-Hitting the Biosensing "Target"

Nanozymes are a class of artificial enzymes that have dimensions in the nanometer range and can be composed of simple metal and metal oxide nanoparticles, metal nanoclusters, dots (both quantum and carbon), nanotubes, nanowires, or multiple metal-organic frameworks (MOFs). They exhibit excellent catalytic activities with low cost, high operational robustness, and a stable shelf-life. More importantly, they are amenable to modifications that can change their surface structures and increase the range of their applications. There are three main classes of nanozymes including the peroxidase-like, the oxidase-like, and the antioxidant nanozymes. Each of these classes catalyzes a specific group of reactions. With the development of nanoscience and nanotechnology, the variety of applications for nanozymes in diverse fields has expanded dramatically, with the most popular applications in biosensing. Nanozyme-based novel biosensors have been designed to detect ions, small molecules, nucleic acids, proteins, and cancer cells. The current review focuses on the catalytic mechanism of nanozymes, their application in biosensing, and the identification of future directions for the field.

Progress in Metal-Organic Frameworks Facilitated Mercury Detection and Removal

Metal Organic Frameworks (MOFs) are noted as exceptional candidates towards the detection and removal of specific analytes. MOFs were reported in particular for the detection/removal of environmental contaminants, such as heavy metal ions, toxic anions, hazardous gases, explosives, etc. Among heavy metal ions, mercury has been noted as a global hazard because of its high toxicity in the elemental (Hg0), divalent cationic (Hg2+), and methyl mercury (CH3Hg+) forms. To secure the environment and living organisms, many countries have imposed stringent regulations to monitor mercury at all costs. Regarding the detection/removal requirements of mercury, researchers have proposed and reported all kinds of MOFs-based luminescent/non-luminescent probes towards mercury. This review provides valuable information about the MOFs which have been engaged in detection and removal of elemental mercury and Hg2+ ions. Moreover, the involved mechanisms or adsorption isotherms related to sensors or removal studies are clarified for the readers. Finally, advantages and limitations of MOFs in mercury detection/removal are described together with future scopes.

Thiol functionalized covalent organic framework for highly selective enrichment and detection of mercury by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A spherical thiol-functionalized covalent organic framework (COF-SH) was designed via a facile thiol-yne click reaction of a alkynyl-terminated COF and pentaerythritol tetra(3-mercaptopropionate). The COF-SH was explored as a new adsorbent for the selective enrichment of Hg2+. The as-prepared COF-SH exhibited a uniform mesoporous structure, a high abundance of binding sites, and good chemical stability, which endow it with great performance for the adsorption of Hg2+ and its corresponding maximum adsorption capacity was up to 617.3 mg g-1. Furthermore, the adsorption behavior of Hg2+ on the COF-SH wasin good agreement with the Langmuir and pseudo-second-order models. The influences of adsorbent dosage, pH, selectivity, and reusability of the COF-SH on Hg2+ adsorption were also investigated. Besides this, the COF-SH showed high selectivity towards Hg2+ even in the presence of a high concentration of K+, Na+, Ca2+, Mg2+ and Zn2+ metal ions. Using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), the corresponding limit of detection (LOD) of Hg2+ was determined at very low concentrations of 80 pg mL-1 (equal to 396 amoL μL-1). In addition, the COF-SH was successfully applied to rapidly enrich and sensitively detect Hg2+ in industrial sewage, with recoveries in the range of 101.8-103.4%, demonstrating the promising potential of COF-SH as an effective adsorbent for use in environmental sample pretreatment.