Design and Preparation of Carbon Nitride-Based Amphiphilic Janus N-Doped Carbon/MoS2 Nanosheets for Interfacial Enzyme Nanoreactor

Janus and Amphiphilic MoS2 2D Sheets for Surface-Directed Orientational Assemblies toward Ex Vivo Dual Substrate Release

The two-dimensional (2-D) Janus and amphiphilic molybdenum disulfide (MoS2) nanosheet with opposite optical activities on each side (amphichiral) is synthesized by modifying sandwich-like bulk MoS2 with tannic acid and cholesterol through biphasic emulsion method. This new type of amphichiral Janus MoS2 nanosheet consists of a hydrophilic and positive optical activity tannic acid side as well as a hydrophobic and negative optical activity cholesterol side thereby characterized by circular dichroism. Surface-directed orientational differentiation assemblies are performed for the as-synthesized 2D material and are characterized by contact angle, infrared spectroscopy, X-ray photoelectron, and circular dichroism spectroscopies. The amphiphilic nature of the materials is demonstrated by the pre-organization of the nanosheets on either hydrophobic or hydrophilic surfaces, providing unprecedented properties of circular dichroism signal enhancement and wettability. Selective detachment of the surface organic groups (cholesterol and tannic acid fragments) is realized by matrix-assisted laser desorption/ionisation - time-of-flight (MALDI-TOF) mass spectrometry, and the dual substrate release in tissue is detected by ex vivo mass spectrometry imaging.

Janus Composite Particles and Interfacial Catalysis Thereby

Janus composite particles (JPs) with distinct compartmentalization of varied components thus performances and anisotropic shape display a variety of properties and have demonstrated great potentials in diversify practical applications. Especially, the catalytic JPs are advantageous for multi-phase catalysis with much easier separation of products and recycling the catalysts. In the first section of this review, typical methods to synthesize the JPs with varied morphologies are briefly surveyed in the category of polymeric, inorganic and polymer/inorganic composite. In the main section, recent progresses of the JPs in emulsion interfacial catalysis are summarized covering organic synthesis, hydrogenation, dye degradation, and environmental chemistry. The review will end by calling more efforts toward precision synthesis of catalytic JPs at large scale to meet the stringent requirements in practical applications such as catalytic diagnosis and therapy by the functional JPs.

MoS2/polyaniline (PANI)/polyacrylonitrile (PAN)@BiFeO3 bilayer hollow nanofiber membrane: Photocatalytic filtration and piezoelectric effect enhancing degradation and disinfection

A novel MoS₂/polyaniline (PANI)/polyacrylonitrile (PAN)@BiFeO₃ bilayer hollow nanofiber membrane (PPBM-H) was successfully synthesized by coaxial electrospinning technique. In the nanofiber, BiFeO₃ nanoparticles (NPs) and MoS₂ nanosheets (NSs) were loaded in the middle and outer layers of the PANI/PAN composites, respectively, which constructs a type II heterojunction with spatially separated microtopography, thus significantly improving the charge separation in photocatalysis. Moreover, the hollow structure and the vast number of exposed groups on the surface of PPBM-H help to improve the mass transfer efficiency and pollutant adsorption performance in wastewater treatment. In addition, PPBM-H can generate H₂O₂ by in-situ activation of BiFeO₃/MoS₂ for photo-Fenton catalysis, enabling Fe³⁺ and Fe²⁺ recycling. Also, PPBM-H can produce piezoelectric polarisation under ultrasonic excitation, which can further enhance the efficiency of electron/hole separation and transfer, and induce the generation of active free radicals. Owing to its wonderful self-cleaning effect, the PPBM-H has good mechanical strength (2.95 Mpa), hydrophilicity (11.6°), water flux (1248 L·m^-2·h^-1), BSA rejection (98.8 %), and exhibits distinguished photocatalytic filtration efficiencies (99.5 % tetracycline hydrochloride (TCH) and 99.9 % methyl orange (MO) within 60 min), piezo-photocatalysis (99.2 % TCH within 2 h), disinfection performance for Escherichia coli (E. coli) (100 %, within 60 min).

Hollow Mesoporous Carbon-Based Enzyme Nanoreactor for the Confined and Interfacial Biocatalytic Synthesis of Phytosterol Esters

Rationally designing carriers to obtain efficient and stable immobilized enzymes for the production of food raw materials is always a challenge. In this work, hollow cube carbon (HMC) as a carrier of Candida rugosa lipase (CRL) was prepared to construct a Pickering interfacial biocatalysis system, which was applied to biphasic biocatalysis. For comparison, the nonporous carbon (HC) and porous MoS₂ (HMoS₂) were also designed. On these grounds, p-NPP and linolenic acid were selected as the representative substrates for hydrolysis and esterification reactions. Under the optimal conditions, the protein loading amount, specific activity, and expressed activity of CRL immobilized on HMC (HMC@CRL) were 167.2 mg g^-1, 5.41 U mg^-1, and 32.34 U/mg protein, respectively. In the "oil-water" biphase, the relative hydrolytic activity of HMC@CRL was higher than that of HC@CRL, HMoS₂@CRL, and CRL by 50, 68, and 80%, respectively, as well as itself in one phase. Compared to other reports (1.13%), HMC@CRL demonstrated a satisfactory hydrolysis rate (3.02%) and was the fastest among all other biocatalysts in the biphase. Moreover, compared with the free CRL in one-phase system, the Pickering interfacial biphasic biocatalyst, HMC@CRL, exhibited a higher esterification rate (85%, 2.7-fold enhancement). Therefore, the HMC@CRL nanoreactors had more optimal performance in the field of biomanufacturing and food industry.

Task-Specific Janus Materials in Heterogeneous Catalysis

Janus materials are anisotropic nano- and microarchitectures with two different faces consisting of distinguishable or opposite physicochemical properties. In parallel with the discovery of new methods for the fabrication of these materials, decisive progress has been made in their application, for example, in biological science, catalysis, pharmaceuticals, and, more recently, in battery technology. This Minireview systematically covers recent and significant achievements in the application of task-specific Janus nanomaterials as heterogeneous catalysts in various types of chemical reactions, including reduction, oxidative desulfurization and dye degradation, asymmetric catalysis, biomass transformation, cascade reactions, oxidation, transition-metal-catalyzed cross-coupling reactions, electro- and photocatalytic reactions, as well as gas-phase reactions. Finally, an outlook on possible future applications is given.

Amphiphilic Nanointerface: Inducing the Interfacial Activation for Lipase

Graphene-based materials are widely used in the field of immobilized enzymes due to their easily tunable interfacial properties. We designed amphiphilic nanobiological interfaces between graphene oxide (GO) and lipase TL (Thermomyces lanuginosus) with tunable reduction degrees through molecular dynamics simulations and a facile chemical modulation, thus revealing the optimal interface for the interfacial activation of lipase TL and addressing the weakness of lipase TL, which exhibits weak catalytic activity due to an inconspicuous active site lid. It was demonstrated that the reduced graphene oxide (rGO) after 4 h of ascorbic acid reduction could boost the relative enzyme activity of lipase TL to reach 208%, which was 48% higher than the pristine GO and 120% higher than the rGO after 48 h of reduction. Moreover, TL-GO-4 h's tolerance against heat, organic solvent, and long-term storage environment was higher than that of free TL. The drawbacks of strong hydrophobic nanomaterials on lipase production were explored in depth with the help of molecular dynamics simulations, which explained the mechanism of enzyme activity enhancement. We demonstrated that nanomaterials with certain hydrophilicity could facilitate the lipase to undergo interfacial activation and improve its stability and protein loading rate, displaying the potential of the extensive application.

An Electrospun Sandwich-Type Lipase-Membrane Bioreactor for Hydrolysis at Macroscopic Oil-Water Interfaces

The core task for lipase catalytic system design is to construct a suitable oil-water interface for lipase distribution. In comparison to the micro-oil-water interface, the macro-oil-water interface (top oil-bottom water) served as a simplified lipase catalytic system that is more in line with industrial applications but limited in catalytic efficiency. Based on the assumption that one potential carrier can help lipase reach to the macro-oil-water interface, in the current work, sandwich-type lipase-membrane bioreactors (SLMBs) fabricated by a facile layer-by-layer electrospinning process were reported. These SLMBs were composed of a hydrophilic polyamide 6 nanofibrous membrane (NFM) as the bottom layer, a blended electrospun lipase/PVA NFM as the middle layer, and a hydrophobic EC/PU NFM as the top layer. The lipase loading can be controlled by altering the electrospinning time of the middle layer. Under the optimized conditions, the catalytic efficiency of the SLMBs was 2.05 times higher than that of free lipase. In addition, the SLMBs exhibit much better pH (high activity over a broad pH range of 5-10), temperature (retained 62% at 80 °C), storage stability (no loss of activity after being stored at 4 °C for 11 days), and reusability (retained 23% after five cycles) than free lipase.

Anisotropic Janus materials: from micro-/nanostructures to applications

Janus materials have led to great achievements in recent years owing to their unique asymmetric structures and properties. In this review, recent advances of Janus materials including Janus particles and Janus membranes are summarized, and then the microstructures and applications of Janus materials are emphasized. The asymmetric wettability of Janus materials is related to their microstructures; hence, the microstructures of Janus materials were analyzed, compared and summarized. Also presented are current and potential applications in sensing, drug delivery, oil-water separation and so on. Finally, a perspective on the research prospects and development of Janus materials in more fields is given.

Metal-Nanoparticles-Loaded Ultrathin g-C3N4 Nanosheets at Liquid-Liquid Interfaces for Enhanced Biphasic Catalysis

Exploiting new interface-active solid catalysts is crucial to construct efficient Pickering emulsion systems for biphasic catalysis. In this work, ultrathin g-C₃N₄ nanosheets (g-C₃N₄-NSs) were developed as a new solid emulsifier to directly position catalytic sites at oil-water interfaces for improving the reaction efficiency of a biphasic reaction. Exemplified by a metal-involved biphasic reaction of nitroarenes reduction, the developed Pd/g-C₃N₄-NSs catalyst with Pd nanoparticles loaded on the surface of g-C₃N₄-NSs exhibited excellent activity with a catalytic efficiency of 1220 h^-1. Such activity was 4.2 and 17.9 times higher than those of Pd/g-C₃N₄-bulk and the ordinary Pd/C₈-SiO₂ catalyst, respectively. Also, in the biphasic oxidation reaction of alcohols, Pd/g-C₃N₄-NSs achieved a 2.3-fold activity enhancement. It was found by analyzing the solidified emulsion droplets that the Pd/g-C₃N₄-NSs catalyst was parallelly assembled at the oil-water interfaces. Because of the ultrathin thickness of g-C₃N₄-NSs, such a unique interfacial assembly behavior allowed precise positioning of Pd nanoparticles at the oil-water interfaces. As a result, the oil-soluble reactant could directly react with the water-soluble reactant at the oil-water interface hosting the Pd nanoparticles. Our elaborately designed reaction interface was believed to substantially avoid the diffusion barrier between oil-soluble and water-soluble reactants and then to significantly enhance the reactivity of biphasic reactions. This work highlights the importance of the interfacial location of catalytic sites in biphasic catalysis.

Preparation and applications of freestanding Janus nanosheets

In the family of Janus nanomaterials, Janus nanosheets possess not only the advantages of Janus nanomaterials, but also the advantages of two-dimensional nanosheets, endowing them with many extraordinary properties. Therefore, Janus nanosheets have great potential in the fields of interfacial engineering, catalysis, and molecular recognition. This review summarizes and discusses the recent advances in both the preparation and applications of freestanding Janus nanosheets. After a short introduction to different types of Janus nanosheets, a variety of methods for preparing freestanding Janus nanosheets are introduced, including the surface reaction, interface reaction, emulsion reaction, self-assembly, and stripping of non-Janus nanosheets, as well as selective grafting of existing Janus nanosheets. Then, the wide applications of Janus nanosheets in the fields of emulsification, catalysis, polymer reinforcement, nanomotors, and molecular recognition are summarized in detail. Finally, a discussion on the remaining challenges and future perspectives in this field is included. This review will not only deepen the understanding of Janus nanosheets, but also benefit the designs and fabrications of extraordinary and multi-functional Janus nanosheets.

Porous Inorganic Materials for Bioanalysis and Diagnostic Applications

Porous inorganic materials play an important role in adsorbing targeted analytes and supporting efficient reactions in analytical science. The detection performance relies on the structural properties of porous materials, considering the tunable pore size, shape, connectivity, etc. Herein, we first clarify the enhancement mechanisms of porous materials for bioanalysis, concerning the detection sensitivity and selectivity. The diagnostic applications of porous material-assisted platforms by coupling with various analytical techniques, including electrochemical sensing, optical spectrometry, and mass spectrometry, etc., are then reviewed. We foresee that advanced porous materials will bring far-reaching implications in bioanalysis toward real-case applications, especially as diagnostic assays in clinical settings.

Partial sulfur vacancies created by carbon-nitrogen deposition of MoS2 for high-performance overall electrocatalytic water splitting

Electrocatalytic water splitting is a promising energy-efficient solution to obtain clean hydrogen energy. Bifunctional electrocatalysts made up of cheap and abundant elements and suitable for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are critically needed, yet their performance deserves substantial improvement. The catalytic activity could be improved by creating unsaturated defects, which so far has rarely been demonstrated. Here, we combine the effects of unsaturated sulfur vacancies and bi-elemental C and N doping in MoS₂ nanosheets to achieve high-performance bifunctional electrocatalysts. The new method to obtain C and N doped MoS₂ at high temperature is presented. The obtained C-N-MoS₂/CC-T catalysts with S unsaturated defect sites and Mo-N links exhibit high activity and improved electrical conductivity for both the HER and OER in alkaline media. Systematic experiments and density functional theory (DFT) analysis confirm that CN-doping exposes catalytically active sites and enhances water adsorption. The optimized C-N-MoS₂/CC-700 catalyst exhibits low overpotentials of 90 and 230 mV at 10 mA cm^-2 for the HER and OER, respectively. Importantly, the porous C-N-MoS₂/CC-700 nanosheets deliver low voltages of 1.58 V for the overall water splitting at 10 mA cm^-2 and robust operation for 30 h without any reduced activity. Such impressive performances are attributed to their unique structure with large specific surface area, abundant S unsaturated sites, Mo-N links, and shortened electron transfer paths. This partial defect filling by the bi-dopant incorporation approach is generic and is promising for a broad range of advanced energy materials.

Immobilized Lipase Based on Hollow Mesoporous Silicon Spheres for Efficient Enzymatic Synthesis of Resveratrol Ester Derivatives

Enzymatic esterification of resveratrol is crucial for its potential application in lipophilic foods and drugs. However, the poor activity of the free enzyme hinders the reaction. In this work, the highly efficient enzymatic synthesis of resveratrol ester derivatives was achieved by immobilized lipase on hydrophobic modified hollow mesoporous silicon spheres (HMSS-C₈). We preliminarily explored the use of Candida sp. 99-125 lipase (CSL) for the acylation of resveratrol, with a regioselectivity toward 3-OH- over 4'-OH-acylation. HMSS-C₈ provided ideal accommodation for CSL with a loading capacity of up to 652 mg/g. The catalytic efficiency of CSL@HMSS-C₈ was 15 times higher than that of free CSL, and the conversion of resveratrol reached 98.7% within only 2 h, which is the fastest value recorded in the current literature. After 10 cycles, the conversion remained up to 86.3%. Benefiting from better lipid solubility, the relative oxidation stability index values of oil containing monoester derivatives were 43.1%-68.8% and 23.9%-33.2% higher than that of refined oil and oil containing resveratrol, respectively. This research provides a new pathway for efficient enzymatic synthesis of resveratrol ester derivatives and demonstrates the potential application of resveratrol monoester derivatives as a group of excellent lipid-soluble antioxidants.

Liquid Metal Initiator of Ring-Opening Polymerization: Self-Capsulation into Thermal/Photomoldable Powder for Multifunctional Composites

Liquid metal nanodroplets not only share similar metallic properties and nanoscale effect with solid metal nanoparticles, but also possess the additional uniqueness in nonvolatile fluidity and ambient sintering ability into continuous conductors. In most cases, liquid metal nanodroplets are encapsulated into ultrathin and fragile shells of oxides and amphiphile monolayers, and may be hindered from incorporating homogeneously into various composites through conventional processing methods. In this study, ring-opening polymerization is found to be initiated by sonicating the liquid metal EGaIn in fluidic lactones. By this in situ polymerization, EGaIn nanodroplets are encapsulated into polylactone shells with tunable thickness, which can further be dried into a solid powder. Besides high chemical stability and dispersibility in organic solvents, the powder of the EGaIn capsules combines the exceptional properties of the EGaIn droplets (e.g., photothermal effect) and the polylactone shells (e.g., biocompatibility, biodegradability, and compatibility with different polymer matrixes), being capable of being introduced into thermoplastic composites through liquid casting and thermal- or photomolding for the notch-insensitive tearing property, sintering-induced electric conductivity, and photothermal effect. Thus, the EGaIn initiator of ring-opening polymerization may start a pathway to produce stable andthermal/photomoldable powders of EGaIn capsules and their multifunctionalcomposites, applicable in biomedicines, soft electronics, and smart robots.

Preparation of Lipase-Electrospun SiO2 Nanofiber Membrane Bioreactors and Their Targeted Catalytic Ability at the Macroscopic Oil-Water Interface

Lipase is one of the most widely used enzymes in biocatalysis. Because of the special structure of the catalytic active center, lipases show high catalytic activity at oil-water interfaces. Hence, the interface plays a key role in activating and modulating lipase biocatalysis. Compared with traditional catalytic systems that offer interfaces, such as emulsions, a lipase-membrane bioreactor exhibits many obvious advantages when at the macroscopic oil-water system. In our current research, a series of new Burkholderia cepacia lipase (BCL)-SiO₂ nanofiber membrane (NFM) bioreactors prepared via combined electrospinning and immobilization strategies were reported. These SiO₂ NFMs assisted BCL in reaching the oil-water interface for efficient catalysis. The enzyme loading capacity and catalytic efficiency of BCL-SiO₂ NFMs varied with the surface hydrophobicity of the electrospun NFMs. As the hydrophobicity increased, the activity decreased from 2.43-fold to 0.74-fold that of free BCL. However, the lipase-loading capacity increased obviously when the hydrophobicity of the SiO₂ NFMs increased from 0 to 143°, and no significant change was observed when the hydrophobicity of the SiO₂ NFMs increased from 143 to 153°. The gel trapping technique proved that the hydrolytic activity of the different BCL-SiO₂ NFM bioreactors depends on the contact area of the membrane at the oil-water interface. BCL-SiO₂ NFM, BCL-SiO₂ NFM-C₁₂, and BCL-SiO₂ NFM-C₁₈ retained 32, 83, and 42% of activity, respectively, after five cycles of reuse. The current work was a useful exploration of the construction and modification of lipase-membrane reactors based on electrospun inorganic silicon.

Melamine-based Covalent Organic Polymers (MCOPs) as Lipase Nanocarrier for Recyclable Esters Hydrolysis and Transesterification

Present study has successfully synthesized melamine-based covalent organic polymers (MCOPs) and applied it as lipase carrier for recyclable esters hydrolysis and transesterification. The synthesized MCOPs are composed of dense nanosheet structures having a thickness of 3.5 nm. Three immobilization methods namely physical adsorption, cross-linking and carrier activation were employed to prepare the MCOPs-immobilized CRL. Cross-linked MCOPs-immobilized CRL (41.30 mg protein/g MCOPs) and carrier activated MCOPs-immobilized CRL (33.20 mg protein/g MCOPs) had higher enzyme loading as compared to physical absorb MCOPs-immobilized CRL (29.30 mg protein/g MCOPs). Nevertheless, physical absorb MCOPs-immobilized CRL demonstrated the highest esters hydrolysis (49.85 U) and transesterification (1.04 U) activities. Despite having the highest enzymatic activity, physical absorb MCOPs-immobilized CRL were not able to maintain its catalytic stability with more than 30% decreased in enzymatic activity during consecutive hydrolysis and transesterification activities. Meanwhile, cross-linked MCOPs-immobilized CRL demonstrated highest catalytic stability with highest enzymatic activities at the end of consecutive reactions. All the MCOPs-immobilized CRL can be easily recovered and reused through centrifugation with more than 85% of recovery rate.

Synthesis of lutein esters using a novel biocatalyst of Candida antarctica lipase B covalently immobilized on functionalized graphitic carbon nitride nanosheets

Lutein scavenges free radicals and inhibits vision damage caused by photo oxidation, while decomposing easily with light and heat. Its stability and bioavailability can be tremendously improved by lutein ester synthesis. However, green and efficient esterification preparation methods are urgently needed. In this study, which used functionalized graphitic carbon nitride nanosheets (g-C₃N₄-Ns) as the immobilized carrier, a novel biocatalyst was designed and prepared to accommodate Candida antarctica lipase B (CALB), considerably enhancing the performance. It was characterized by TEM, XRD, FTIR, XPS, TGA, and BET to demonstrate successful preparation and then applied to catalyze esterification between lutein and succinate anhydride in dimethyl formamide (DMF) solvent resulting in a conversion rate up to 92% at 50 °C in 60 h, 34% more than free CALB under the same conditions. We believe this is the highest esterification rate in lutein esters synthesis and it has great potential to facilitate eco-friendly and efficient preparation.