A Millifluidic Device with Embedded Cross-Linked Enzyme Aggregates for Degradation of H2O2

Active and stable alcohol dehydrogenase-assembled hydrogels via synergistic bridging of triazoles and metal ions

Biocatalysis is increasingly replacing traditional methods of manufacturing fine chemicals due to its green, mild, and highly selective nature, but biocatalysts, such as enzymes, are generally costly, fragile, and difficult to recycle. Immobilization provides protection for the enzyme and enables its convenient reuse, which makes immobilized enzymes promising heterogeneous biocatalysts; however, their industrial applications are limited by the low specific activity and poor stability. Herein, we report a feasible strategy utilizing the synergistic bridging of triazoles and metal ions to induce the formation of porous enzyme-assembled hydrogels with increased activity. The catalytic efficiency of the prepared enzyme-assembled hydrogels toward acetophenone reduction is 6.3 times higher than that of the free enzyme, and the reusability is confirmed by the high residual catalytic activity after 12 cycles of use. A near-atomic resolution (2.1 Å) structure of the hydrogel enzyme is successfully analyzed via cryogenic electron microscopy, which indicates a structure-property relationship for the enhanced performance. In addition, the possible mechanism of gel formation is elucidated, revealing the indispensability of triazoles and metal ions, which guides the use of two other enzymes to prepare enzyme-assembled hydrogels capable of good reusability. The described strategy can pave the way for the development of practical catalytic biomaterials and immobilized biocatalysts.

(Magnetic) Cross-Linked Enzyme Aggregates of Cellulase from T. reesei: A Stable and Efficient Biocatalyst

Cross-linked enzyme aggregates (CLEAs) represent an effective tool for carrier-free immobilization of enzymes. The present study promotes a successful application of functionalized magnetic nanoparticles (MNPs) for stabilization of cellulase CLEAs. Catalytically active CLEAs and magnetic cross-linked enzyme aggregates (mCLEAs) of cellulase from Trichoderma reesei were prepared using glutaraldehyde (GA) as a cross-linking agent and the catalytic activity and stability of the CLEAs/mCLEAs were investigated. The influence of precipitation agents, cross-linker concentration, concentration of enzyme, addition of bovine serum albumin (BSA), and addition of sodium cyanoborohydride (NaBH₃CN) on expressed activity and immobilization yield of CLEAs/mCLEAs was studied. Particularly, reducing the unsaturated Schiff's base to form irreversible linkages is important and improved the activity of CLEAs (86%) and mCLEAs (91%). For increased applicability of CLEAs/mCLEAs, we enhanced the activity and stability at mild biochemical process conditions. The reusability after 10 cycles of both CLEAs and mCLEAs was investigated, which retained 72% and 65% of the initial activity, respectively. The thermal stability of CLEAs and mCLEAs in comparison with the non-immobilized enzyme was obtained at 30 °C (145.65% and 188.7%, respectively) and 50 °C (185.1% and 141.4%, respectively). Kinetic parameters were determined for CLEAs and mCLEAs, and the K_M constant was found at 0.055 ± 0.0102 mM and 0.037 ± 0.0012 mM, respectively. The maximum velocity rate (V_max) was calculated as 1.12 ± 0.0012 µmol/min for CLEA and 1.17 ± 0.0023 µmol/min for mCLEA. Structural characterization was studied using XRD, SEM, and FT-IR. Catalytical properties of immobilized enzyme were improved with the addition of reducent NaBH₃CN by enhancing the activity of CLEAs and with addition of functionalized aminosilane MNPs by enhancing the activity of mCLEAs.

Microfluidic fabrication of tunable alginate-based microfibers for the stable immobilization of enzymes

Immobilized enzymes have drawn extensive attention due to their enhanced stability, easy separation from reaction mixture, and prominent recyclability. Nevertheless, it is still an ongoing challenge to develop potent immobilization techniques which are capable of stable enzyme encapsulation, minimal loss of activity, and modulability for various enzymes and applications. Here, microfibers with tunable size and composition were fabricated using a home-made microfluidic device. These microfibers were able to efficiently encapsulate bovine serum albumin (BSA), glucose oxidase (GOx), and horseradish peroxidase (HRP). But the physically adsorbed enzymes readily diffused into the catalytic reaction system. The leakage of enzymes could be substantially inhibited by conjugating to polyacrylic acid (PAA) and incorporating into alginate-based microfibers, enabling stable immobilization, improved recyclability, and enhanced thermostability. In addition, GOx and HRP-loaded microfibers were fabricated under the optimized conditions for the visual detection of glucose using the cascade reaction of these enzymes, showing sensitive color change to glucose with concentration range of 0-2 mM. Due to the tunability and versatility, this microfluidic-based microfiber platform may provide a valuable approach to the enzyme immobilization for the cascade catalysis and diagnoses with multiple clinical markers. This article is protected by copyright. All rights reserved.

Cross-linked enzyme aggregates immobilization: preparation, characterization, and applications

Enzymes are commonly used as biocatalysts for various biological and chemical processes. However, some major drawbacks of free enzymes (e.g. poor reusability and instability) significantly restrict their industrial practices. How to overcome these weaknesses remain considerable challenges. Enzyme immobilization is one of the most effective ways to improve the reusability and stability of enzymes. Cross-linked enzyme aggregates (CLEAs) has been known as a novel and versatile carrier-free immobilization method. CLEAs is attractive due to its simplicity and robustness, without purification. It generally shows: high catalytic specificity and selectivity, good operational and storage stabilities, and good reusability. Moreover, co-immobilization of different kinds of enzymes can be acquired. These CLEAs advantages provide opportunities for further industrial applications. Herein, the preparation parameters of CLEAs were first summarized. Next, characterization of structural and catalytic properties, stability and reusability are also proposed. Finally, some important applications of this technique in: environmental protection, industrial chemistry, food industry, and pharmaceutical synthesis and delivery are introduced. Potential challenges and future research directions, such as improving cross-linking efficiency and internal mass transfer efficiency, are also presented. This implies that CLEAs provide an efficient and feasible technique to improve the properties of enzymes for use in the industry.

Modulating the biofunctionality of enzyme-MOF nanobiocatalyst through structure-switching aptamer for continuous degradation of BPA

Encapsulating enzyme within MOF (enzyme-MOF) gives rise to new opportunity to improve the fragility of enzyme, but practical application of enzyme-MOF composite is far from being realized. The development of a novel enzyme-MOF composite system should simultaneously guarantee the enhanced activity and controllably complete recycling, and only in this way can we efficiently and economically utilize the enzyme-MOF composite. Herein, we addressed all these fundamental limitations of current enzyme-MOF composite by establishing aptamer-functionalized enzyme-MOF composite (HRP-ZIF-8@P1). HRP-ZIF-8@P1 relied on automatic structure switch of aptamer-target binding and aptamer-cDNA (complementary DNA) hybridization, achieving effectiveness in self-enriching substrate around HRP-ZIF-8@P1 to boost enzymatic activity first, subsequently hybridizing spontaneously with magnetically controllable cDNA sequence (Fe₃O₄@P3) to completely recover the HRP-ZIF-8@P1, where preferentially capturing substrate could further induce the release of the hybridized HRP-ZIF-8@P1 for automatically starting the cyclic enzyme catalysis. A 5.6-fold enhancement in the catalytic efficiency for BPA degradation was endowed, and 94.7% catalytic activity was retained for 8 consecutive degradations of BPA, both of which were even more significant than HRP-ZIF-8. Additionally, remarkable stability of HRP-ZIF-8@P1 was afforded by dual-layer protection of ZIF-8 and P1 in denaturing conditions. Taking the possibility of discovering an aptamer for any target into account, the aptamer-functionalized enzyme-MOF composites provide a generic and simple guide for simultaneously boosting enzymatic activity and controllably full recycling the enzyme-MOF systems, accelerating their commercial utilizations.

Soluble enzyme cross-linking via multi-component reactions: a new generation of cross-linked enzymes

Production of CLEs using a multi-component reaction.