Tetraphenylenthene-Based Conjugated Microporous Polymer for Aggregation-Induced Electrochemiluminescence

Dual emitting aggregation-induced electrochemiluminescence from tetrastyrene derivative for chloramphenicol detection

Chloramphenicol (CAP) poses a threat to human health due to its toxicity and bioaccumulation, and it is very important to measure it accurately and sensitively. This work explored a host-guest recognition strategy to mediate dual aggregation-induced electrochemiluminescence (AIECL) of 1,1,2,2-tetrakis(4-(pyridin-4-yl) phenyl)-ethene (TPPE) for ratio detection of CAP, in which, cucurbit[8]uril (CB[8]) served as host to assemble guest TPPE. The resulting supramolecular complex CB[8]-TPPE exhibited excellent dual-AIECL-emission with signal strength approximately four times that of TPPE aggregates and black hole quencher-1 (BHQ1) could efficiently quench dual-AIECL signal. CB[8]-TPPE coupled dual-function quencher BHQ1 and high-efficiency DNA reactor to achieve ultra-sensitive detection of CAP, exhibiting a linearity range of 10 fmol·L-1-100 nmol·L-1 and limit of detection of 1.81 fmol·L-1. CB[8]-TPPE provides a novel way to improve the dual-emission of TPE derivatives and sets up a promising platform for CAP detection, demonstrating a good practical application potential.

One-Dimensional Covalent Organic Framework with Improved Charge Transfer for Enhanced Electrochemiluminescence

We present a dimensional regulating charge transfer strategy to achieve an enhanced electrochemiluminescence (ECL) by constructing a one-dimensional pyrene-based covalent organic framework (1D-COF). The dual-chain-like edge architecture in 1D-COF facilitates the stabilization of aromatic backbones, the enhancement of electronic conjugations, and the decrease of energy loss. The 1D-COF generates enhanced anodic (92.5-fold) and cathodic (3.2-fold) signals with tripropylamine (TPrA) and K2S2O8 as the anodic and cathodic coreactants, respectively, compared with 2D-COF. The anodic and cathodic ECL efficiencies of 1D-COF are 2.08- and 3.08-fold higher than those of 2D-COF, respectively. According to density functional theory (DFT), the rotational barrier energy (ΔE) of 1D-COF enhances sharply with the increase of dihedral angle, suggesting that the architecture in 1D-COF restrains the intramolecular spin of aromatic chains, which facilitates the decrease of nonradiative transitions and the enhancement of ECL. Furthermore, 1D-COF can be used to construct an ECL biosensor for sensitive detection of dopamine.

Near-infrared electrochemiluminescence biosensors facilitated by thermally activated delayed fluorescence (TADF) emitters for ctDNA analysis

The near-infrared electrochemiluminescence technique (NIR ECL) has gained significant attention as a powerful analytical tool in biomedicine and clinical diagnosis due to its inherent advantages. In this work, we successfully synthesized a novel NIR ECL emitter of TPA-DCPP nanoparticles (NPs) with a D-π-A-π-D configuration. By utilizing the thermally activated delayed fluorescence (TADF) property, we achieved enhanced electrochemiluminescence (ECL) emission through complete exciton harvesting for radiative decay. Specifically, when BDEA was used as a co-reactant, the TPA-DCPP NPs exhibited strong bandgap ECL emission. Additionally, they demonstrated an exceptionally higher ECL efficiency compared to conventional near-infrared fluorescence organic nanomaterials (BSeT-BT NPs). By integrating the efficient anodic ECL performance of TPA-DCPP NPs with Exo III-assisted polymerase enzyme reaction cascade amplification, a highly efficient ECL resonance energy transfer (ECL-RET) platform was developed for ultrasensitive detection of circulating tumor DNA (ctDNA). The established biosensor demonstrated an exceptional linear dynamic range and achieved attomolar-level detection limit. This study highlights the immense potential of TADF emitters in enhancing ECL efficiency and extends the emission wavelength of organic nanomaterials to the NIR region, thereby expanding their applications in biological analysis.

Self-Assembled Tetraphenylethene-Based Nanoaggregates with Tunable Electrochemiluminescence for the Ultrasensitive Detection of E. coli

As an effective ECL emitter, tetraphenylethene (TPE)-based molecules have recently been reported with aggregation-induced electrochemiluminescence (AIECL) property, while it is still a big challenge to control its aggregation states and obtain uniform aggregates with intense ECL emission. In this study, we develop three TPE derivatives carrying a pyridinium group, an alkyl chain, and a quaternary ammonium group via the Menschutkin reaction. The resulting molecules exhibit significantly red-shifted FL and enhanced ECL emissions due to the tunable reduction of the energy gap between the highest occupied molecular orbitals (HOMOs) and the lowest unoccupied molecular orbitals (LUMOs). More importantly, the amphiphilicity of the as-developed molecules enables their spontaneous self-assembly into well-controlled spherical nanoaggregates, and the ECL intensity of nanoaggregates with 3 -CH2- (named as C3) is 17.0-fold higher compared to that of the original 4-(4-(1,2,2-triphenylvinyl)phenyl)pyridine (TPP) molecule. These cationic nanoaggregates demonstrate a high affinity toward bacteria, and an ECL sensor for the profiling of Escherichia coli (E. coli) was developed with a broad linear range and good selectivity in the presence of an E. coli-specific aptamer. This study provides an effective way to enhance the ECL emission of TPE molecules through their derivatization and a simple way to prepare well-controlled AIECL nanoaggregates for ECL application.

Functionalized nanomaterials-based electrochemiluminescent biosensors and their application in cancer biomarkers detection

To detect a range of trace biomarkers associated with human diseases, researchers have been focusing on developing biosensors that possess high sensitivity and specificity. Electrochemiluminescence (ECL) biosensors have emerged as a prominent research tool in recent years, owing to their potential superiority in low background signal, high sensitivity, straightforward instrumentation, and ease of operation. Functional nanomaterials (FNMs) exhibit distinct advantages in optimizing electrical conductivity, increasing reaction rate, and expanding specific surface area due to their small size effect, quantum size effect, and surface and interface effects, which can significantly improve the stability, reproducibility, and sensitivity of the biosensors. Thereby, various nanomaterials (NMs) with excellent properties have been developed to construct efficient ECL biosensors. This review provides a detailed summary and discussion of FNMs-based ECL biosensors and their applications in cancer biomarkers detection.

Electrochemiluminescence enhanced by isolating ACQphores in imine-linked covalent organic framework for organophosphorus pesticide assay

Most of covalent organic frameworks (COFs) are non or weakly emissive due to either the molecular thermal motion-mediated energy dissipation or the aggregation-caused quenching (ACQ) effect. Herein, we synthesize an imine-linked COF (TFPPy-TPh-COF) with high electrochemiluminescence (ECL) emission and the capability of eliminating the ACQ effect and further construct an ECL sensor for malathion detection. The imine-linked COF is obtained by the condensation reaction of (1,1':3',1″-terphenyl)-4,4″-diamine (TPh) and 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPPy), and it has higher ECL efficiency than TFPPy aggregates due to the separation of ACQ luminophores (i.e., TFPPy) from each other by TPh and the restriction of intramolecular motions of TFPPy and TPh to reduce the nonradiative decay. The efficient quenching of ECL is achieved by electrochemiluminescence resonance energy transfer (ERET) from the excited state of the TFPPy-TPh-COF to zeolite imidazolate framework-8 (ZIF-8) and the steric hindrance of ZIF-8. Acetylcholinesterase (AChE) can enzymatically hydrolyze acetylcholine (ACh) to generate acetic acid. The resultant acetic acid can trigger the dissolution of ZIF-8 to produce an enhanced ECL signal. Malathion as an organophosphorus pesticide serves as an AChE inhibitor to prevent the production of acetic acid, inducing the decrease of ECL signal. This sensor displays a limit of detection (LOD) of 2.44 pg/mL and a wide dynamic detection range of 0.01-1000 ng/mL. Furthermore, it can be used to detect other organophosphates pesticides (e.g., methidathion, chlorpyrifos, and paraoxon) and measure malathion in real samples (i.e., pakchoi, lettuce, and apples).

Precise Modulation of Intramolecular Aggregation-induced Electrochemiluminescence by Tetraphenylethylene-based Supramolecular Architectures

The precisely modulated synthesis of programmable light-emitting materials remains a challenge. To address this challenge, we construct four tetraphenylethylene-based supramolecular architectures (SA, SB, SC, and SD), revealing that they exhibit higher electrochemiluminescence (ECL) intensities and efficiencies than the tetraphenylethylene monomer and can be classified as highly efficient and precisely modulated intramolecular aggregation-induced electrochemiluminescence (PI-AIECL) systems. The best-performing system (SD) shows a high ECL cathodic efficiency exceeding that of the benchmark tris(2,2'-bipyridyl)ruthenium(II) chloride in aqueous solution by nearly six-fold. The electrochemical characterization of these architectures in an organic solvent provides deeper mechanistic insights, revealing that SD features the lowest electrochemical band gap. Density functional theory calculations indicate that the band gap of the guest ligand in the SD structure is the smallest and most closely matched to that of the host scaffold. Finally, the SD system is used to realize ECL-based cysteine detection (detection limit=14.4 nM) in real samples. Thus, this study not only provides a precisely modulated supramolecular strategy allowing chromophores to be controllably regulated on a molecular scale, but also inspires the programmable synthesis of high-performance aggregation-induced electrochemiluminescence emitters.

Label-Free Electrogenerated Chemiluminescence Aptasensing Method for Highly Sensitive Determination of Dopamine via Target-Induced DNA Conformational Change

A label-free electrogenerated chemiluminescence (ECL) aptasensing method for highly sensitive determination of dopamine (DA) was developed based on target-induced DNA conformational change. After anti-DA specific aptamer, as molecular recognition element, was hybridized with a capture ss-DNA (complementary with the aptamer), the formed double-strand DNA (ds-DNA) was self-assembled onto the surface of a gold electrode, and then Ru(phen)₃²⁺, as ECL reagent, was intercalated into ds-DNA to form an ECL biosensing platform. In the presence of DA, DA bound with its aptamer and target-induced DNA conformational change occurred, resulting in the dissociation of ds-DNA, the release of intercalated Ru(phen)₃²⁺ from the electrode surface, and the decrease of ECL intensity. For comparison, an ECL aptamer-based biosensing method using an ECL reagent-labeled aptamer was also developed for DA assay based on target-induced DNA conformational change. Because of the increase in the amount of ECL reagent into ds-DNA over that of the single-site ECL reagent-labeled aptamer, an obvious increase of ECL intensity was found at the ds-DNA modified electrode over the aptamer modified electrode. DA can be sensitively detected with a lower detection limit of 0.05 nM in the range from 0.1 to 100 nM. With the recognition of the aptamer for DA, DA can be selectively and sensitively detected in artificial cerebrospinal fluid and serum samples without interference from common small molecules. This work demonstrates that the combination of the direct transduction of specific recognition of DA and its aptamer into an ECL signal with Ru(phen)₃²⁺ intercalated ds-DNA amplification provides a promising strategy for the development of a simple, sensitive, and selective method for DA assay, which is of great importance in neurochemical assays and clinical diagnosis.

In situ coordination interactions between metal-organic framework nanoemitters and coreactants for enhanced electrochemiluminescence in biosensing

Coreactant electrochemiluminescence (ECL) is one of the most popular pathways in commercial analysis, which can provide simplicity and convenience for getting intense ECL emission. However, the low efficiency of intermolecular electron transfer could weaken ECL intensity. In this work, we developed an enhanced ECL strategy through in situ coordination interactions between metal-organic framework emitters and coreactants. First, a metal-organic framework (MOF) emitter was synthesized with 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethane (TPPE) as aggregation-induced emission linkers and Zn as nodes. Interestingly, compared to TPPE ligand, the resulted MOF nanoemitters demonstrated 49.5 folds enhancement of ECL emission in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) as the coreactant. More significantly, different from the constant ECL intensity using TPrA coreactant, DABCO exhibited time-dependent ECL intensity due to the intrareticular electron transfer through coordination interaction between DABCO and Zn²⁺, which was confirmed by X-ray photoelectron spectroscopy and Fourier transform infrared spectral experiments. The enhanced ECL was then applied to construct a sensitive ECL method to detect dopamine in serum samples. The coordination interaction between emitters and coreactants not only provides a universal way to enhance ECL, but also expands the applications of coreactant ECL system in convenience route.

Studies on Annihilation and Coreactant Electrochemiluminescence of Thermally Activated Delayed Fluorescent Molecules in Organic Medium

Very recently, there is a great research interest in electrochemiluminescence (ECL) featuring thermally activated delayed fluorescence (TADF) properties, i.e., TADF-ECL. It is appealing since the earlier reports in this topic well-confirmed that this strategy has a great potential in achieving all-exciton-harvesting ECL efficiency under electrochemical excitation, which is a breakthrough in the topic of organic ECL. However, organic phase electrochemistry and ECL studies surrounding TADF-ECL are still extremely rare. Especially, the ECL spectra of previous reported TADF emitters are still very different from their PL spectra. In this work, we systematically measure and discuss the liquid electrochemistry and ECL behavior of two typical TADF molecules in organic medium. Most importantly, we verify for the first time that the ECL spectra of them (coreactant ECL mode) are identical to their PL spectra counterparts, which confirms the effectiveness of TADF photophysical properties in the coreactant ECL mode in practice.

Processable Conjugated Microporous Polymer Gels and Monoliths: Fundamentals and Versatile Applications

Conjugated microporous polymers (CMPs) as a new type of conjugated polymers have attracted extensive attention in academia and industry because of the combination of microporous structure and π-electron conjugated structure. The construction and application of gels and monoliths based on CMPs constitute a fertile area of research, promising to provide solutions to complex environmental and energy issues. This review summarizes and objectively analyzes the latest advances in the construction and application of processable CMP gels and monoliths, linking the basic and enhanced properties to widespread applications. In this review, we open with a summary of the construction methods used to build CMP gels and monoliths and assess the feasibility of different preparation techniques and the advantages of the products. The CMP gels and monoliths with enhanced properties involving various special applications are then deliberated by highlighting relevant scientific literature and discussions. Finally, we present the issues and future of openness in the field, as well as come up with the major challenges hindering further development, to guide researchers in this field.

Construction of an aggregation-induced electrochemiluminescent sensor based on an aminal-linked covalent organic framework for sensitive detection of glutathione in human serum

We demonstrate the construction of an aggregation-induced electrochemiluminescent (AIECL) sensor for glutathione (GSH) assay by integrating an aminal-linked covalent organic framework (A-COF) with manganese dioxide (MnO₂) nanosheets. The AIECL of the A-COF is quenched by the MnO₂ nanosheets via electrochemiluminescent resonance energy transfer (ERET) from the excited A-COF to MnO₂. The presence of GSH can reduce the MnO₂ nanosheets into Mn²⁺, restoring the AIECL emission of the A-COF. This AIECL sensor has the characteristics of fast response, high sensitivity, and good selectivity toward GSH, and it can accurately measure GSH in human serum.

Enhancing Built-in Electric Field via Molecular Dipole Control in Conjugated Microporous Polymers for Boosting Charge Separation

The built-in electric field (BEF) has been considered as the key kinetic factor for facilitating efficient photoinduced carrier separation and migration of polymeric photocatalysts. Enhancing the BEF of the polymers could enable a directional migration of the photogenerated carriers to accelerate photogenerated charge separation and thus boost photocatalytic performances. However, achieving this approach remains a formidable challenge, which has never been realized in conjugated microporous polymers (CMPs). Herein, we developed a molecular dipole control strategy to modulate the BEF in CMPs by varying the nature of the core. As a result, a series of CMPs with a tunable BEF were designed and prepared via FeCl₃-mediated coupling of bicarbazole with different acceptor cores. The optimized CbzCMP-9 featured the strongest BEF induced by its high molecular dipole, which grants it with a powerful driving force to accelerate exciton dissociation into electron-hole pairs and facilitates charge transfer along the backbone of CMPs to the surface, resulting in a remarkable photocatalytic performance toward thiocyano chromones and C-3 thiocyanation of indoles (up to 95 and 98% yields, respectively) and prominently surpassing many other reported photocatalysts. In brief, the proposed strategy highlights that enhancing the BEF by modulating molecular dipole can lead to a dramatic improvement in photocatalytic performance, which is expected to be employed for constructing other photocatalytic systems with high performance.

Electrochemiluminescent sensor based on an aggregation-induced emission probe for bioanalytical detection

In recent years, with the rapid development of electrochemiluminescence (ECL) sensors, more luminophores have been designed to achieve high-throughput and reliable analysis. Impressively, after the proposed fantastic concept of "aggregation-induced electrochemiluminescence (AIECL)" by Cola, the application of AIECL emitters provides more abundant choices for the further improvement of ECL sensors. In this review, we briefly report the phenomenon, principle and representative applications of aggregation-induced emission (AIE) and AIECL emitters. Moreover, it is noteworthy that the cases of AIECL sensors for bioanalytical detection are summarized in detail, from 2017 to now. Finally, inspired by the applications of AIECL emitters, relevant prospects and challenges for AIECL sensors are proposed, which is of great significance for exploring more advanced bioanalytical detection technology.

A flexible and bright surface-enhanced electrochemiluminescence film constructed from efficient aggregation-induced emission luminogens for biomolecular sensing

A bright surface-enhanced electrochemiluminescence film (SEEF) was fabricated from an organic luminogen with aggregation-induced emission (AIEgen) features on flexible substrates. Flexible carbonous substrates including carbon fiber cloth (GCFC) and carbon fiber paper (GCFP) were decorated with gold nanoparticles (AuNPs) through electrochemical deposition methods, followed by facilely casting AIEgen solutions. The resulting SEEF had a low driving potential of +0.84 V, and its electrochemiluminescence (ECL) was readily observed by the naked eye. The systematic investigation showed that the bright ECL was associated with the promoted electrochemical oxidation and radiative decay of excited AIEgens enhanced by AuNP deposition. Intriguingly, the ECL intensity of the film was linearly enhanced by increasing AIEgen loadings, which allowed tuning of ECL brightness on demand. Moreover, the SEEF was flexible and immune to folding. The ECL intensity rarely changed even when consecutively folding the film 20 times due to the strong interaction between the AIEgen and substrate. The SEEF was further used to sense biomolecules in aqueous media. The ECL of the film was linearly quenched in the presence of dopamine (DA) in the range of 10^-15-10^-6 M with a record-low limit of detection of 3.16 × 10^-16 M. Furthermore, a simple method based on grayscale analysis of ECL images (GAEI) was used for visual sensing of DA. This work provides a kind of novel bright ECL film, useful for the ultrasensitive monitoring of biomolecules in aqueous media.

Macroscale Conjugated Microporous Polymers: Controlling Versatile Functionalities Over Several Dimensions

Since discovered in 2007, conjugated microporous polymers (CMPs) have been developed for numerous applications including gas adsorption, sensing, organic and photoredox catalysis, energy storage, etc. While featuring abundant micropores, the structural rigidity derived from CMPs' stable π-conjugated skeleton leads to insolubility and thus poor processability, which severely limits their applicability, e.g., in CMP-based devices. Hence, the development of CMPs whose structure can not only be controlled on the micro- but also on the macroscale have attracted tremendous interest. In conventional synthesis procedures, CMPs are obtained as powders, but in recent years various bottom-up synthesis strategies have been developed, which yield CMPs as thin films on substrates or as hybrid materials, allowing to span length scales from individual conjugated monomers to micro-/macrostructures. This review surveys recent advances on the construction of CMPs into macroscale structures, including membranes, films, aerogels, sponges, and other architectures. The focus is to describe the underlying fabrication techniques and the implications which follow from the macroscale morphologies, involving new chemistry and physics in such materials for applications like molecular separation/filtration/adsorption, energy storage and conversion, photothermal transformation, sensing, or catalysis.

Highly Efficient Aggregation-Induced Enhanced Electrochemiluminescence of Cyanophenyl-Functionalized Tetraphenylethene and Its Application in Biothiols Analysis

Exploring new electrochemiluminescence (ECL) luminophores with high ECL efficiency and good stability in aqueous solution is in great demand for biological sensing. In this work, highly efficient aggregation-induced enhanced ECL of cyanophenyl-functionalized tetraphenylethene (tetra[4-(4-cyanophenyl)phenyl]ethene, TCPPE) and its application in biothiols analysis were reported. TCPPE contains four 4-cyanophenyl groups covalently attached to the tetraphenylethene (TPE) core, generating a nonplanar three-dimensional twisted conformation structure. TCPPE nanoparticles (NPs) with an average size of 15.84 nm were prepared by a precipitation method. High ECL efficiency (593%, CdS as standard) and stable ECL emission (over one month) were obtained for TCPPE NPs in aqueous solution. The unique properties of TCPPE NPs could be ascribed to the efficient suppression of nonradiative transition, the decrease of the energy gap, and the increase of anionic radical stability, which were proved by theoretical calculation and electrochemical and fluorescence methods. Contrasting aggregation-induced ECL chromic emission was first observed for TCPPE NPs. As a proof-of-methodology, an ECL method was developed for three biothiol assays with detection limits of 6, 7, and 300 nM for cysteine, homocysteine, and glutathione, respectively. This work demonstrates that TCPPE NPs are promising ECL luminophores, and the incorporation of appropriate substituents into luminophores can improve ECL efficiency and radical stability.

Boosting charge separation in conjugated microporous polymers via fluorination for enhancing photocatalysis

Conjugated microporous polymers (CMPs) have emerged as prospective heterogeneous photocatalysts for photocatalytic aerobic oxidation due to their ease of functionalization, high surface area and porosity, and tunable band gap.

A scaffold of thermally activated delayed fluorescent polymer dots towards aqueous electrochemiluminescence and biosensing applications

Thermally activated delayed fluorescent (TADF) polymer dots were prepared, which enables aqueous electrochemiluminescence of TADF polymer emitters and its biosensor application for the first time.

Graphdiyne nanosheet as a novel sensing platform for self-enhanced electrochemiluminescence of MOF enriched ruthenium (II) in the presence of dual co-reactants for detection of tumor marker

Graphdiyne (GDY) is a new two-dimensional carbon material with high charge carrier mobility, excellent conductivity, more suitable band gap, and natural pores was introduced as a new electrochemiluminescent sensing platform. Herein, the metal organic framework (MOFs) used for enrichment of luminophore with grafting Ru(bpy)₂(phen-NH₂)²⁺(Ru-complex) and Ru-complex amine-rich nitrogen-doped carbon nanodots(Ru-NCNDs) via both encapsulating and external decoration and decoration of SmS₂ QDs as coreactant. Then, the MOF enriched Ru-complex (Ru@MOF@NCNDs-Ru@SmS₂ QD) located on a GDY modified ITO electrode developed as a novel and efficient ECL platform. According to the Density Functional Theory (DFT) calculation, the band gap of graphdiyne/Ru(bpy)₂(phen-NH₂)²⁺ system decreased compared to graphdiyne, Ru-complex and also graphene oxide/Ru(bpy)₂(phen-NH₂)²⁺system, which enhanced (2 folds) the signal response of the presented ECL platform. The ECL response signal of the suggested emitter with high ECL efficiency (13.34%) increased 8 and 4 folds compared to GDY/Ru-NCNDs and GDY/Ru@MOF@NCNDs-Ru as platforms, respectively. The proposed ECL platform applied for CA19-9 antigens detection at concentration range 0.0005 UmL^-1 to 200 UmL^-1 and detection limit of 0.00013 UmL^-1.The development of GDY based platform for decorating nano luminophores, not only provides the design of ECL luminophores with high performance but also promises the application of the presented strategy for fabrication of ultrasensitive bio affinity sensors as candidates in clinical monitoring and diseases diagnostics.

Mechano-chromic and mechano-enhanced electrogenerated chemiluminescence of tetra[4-(4-cyanophenyl)phenyl]ethene

Mechano-chromic and mechano-enhanced ECL of tetra[4-(4-cyanophenyl)phenyl]ethene (TCPPE) is observed. TCPPE can be used as a promising mechano-chromic and mechano-enhanced luminescent material in rewritable and optical-recording.

Covalent Organic Frameworks as Advanced Uranyl Electrochemiluminescence Monitoring Platforms

Electrochemiluminescence (ECL), as an advanced sensing process, can selectively control the generation of excited states by changing the potential. However, most of the existing ECL systems rely on poisonous coreactants to provide radicals for luminescence; although the ECL efficiency was improved, the athematic coreactants will cause unpredictable interference to the accurate analysis of trace targets. Herein, we realized the ECL of nonemitting molecules by performing intramolecular electron transfer in the olefin-linked covalent organic frameworks (COFs), with a high efficiency of 63.7%. Employing internal dissolved oxygen as the coreactant, it is well suitable for the analysis of various complex samples in the environment. Taking nuclear contamination analysis as the goal orientation, we further illustrated a design of a "turn-on" uranyl ion monitoring system integrating fast response, low detection limit, and high selectivity, showing that new ECL-COFs are promising to facilitate environment-related sensing analysis and structure-feature correlation mechanism exploration.

Aggregation-induced delayed fluorescence luminogens: the innovation of purely organic emitters for aqueous electrochemiluminescence

Due to overcoming the limitation of aggregation caused quenching (ACQ) of solid-state emitters, aggregation-induced emission (AIE) organic luminogens have become a promising candidate in aqueous electrochemiluminescence (ECL). However, restricted by the physical nature of fluorescence, current organic AIE luminogen-based ECL (AIECL) faces the bottleneck of low ECL efficiency. Here, we propose to construct de novo aqueous ECL based on aggregation-induced delayed fluorescence (AIDF) luminogens, called AIDF-ECL. Compared with the previous organic AIE luminogens, purely organic AIDF luminogens integrate the superiorities of both AIE and the utilization of dark triplets via thermal-activated spin up-conversion properties, thereby possessing the capability of close-to-unity exciton utilization for ECL. The results show that the ECL characteristics using AIDF luminogens are directly related to their AIDF properties. Compared with an AIECL control sample based on a tetraphenylethylene AIE moiety, the ECL efficiency of our AIDF-ECL model system is improved by 5.4 times, confirming the excellent effectiveness of this innovative strategy.

Arousing Electrochemiluminescence Out of Non-Electroluminescent Monomers within Covalent Organic Frameworks

Covalent organic frameworks (COFs) with stable long-range ordered arrangements are promising materials for organic optoelectronics. However, their electrochemiluminescence (ECL) from non-ECL active monomers has not been realized. Here, we report a design strategy for ECL-emitting COF family. The donors and acceptors co-crystallized and stacked into the highly aligned array of olefin-linked COFs, so that electrons can be transported freely. By this means, a tunable ECL is activated from non-ECL molecules with the maximum efficiency of 32.1% in water with the dissolved oxygen as an inner coreactant, and no additional noxious co-reactant is needed any more. Quantum chemistry calculations further demonstrate that this design reduces the COFs' band gaps and the overlap of electrons and holes in the excited state for better photoelectric properties and stronger ECL signals. This work exploits a basis to envisage the broad application potential of ECL-COFs for various biosensors and light-emitting display.

A general design approach toward covalent organic frameworks for highly efficient electrochemiluminescence

Electrochemiluminescence (ECL) plays a key role in analysis and sensing because of its high sensitivity and low background. Its wide applications are however limited by a lack of highly tunable ECL luminophores. Here we develop a scalable method to design ECL emitters of covalent organic frameworks (COFs) in aqueous medium by simultaneously restricting the donor and acceptor to the COFs' tight electron configurations and constructing high-speed charge transport networks through olefin linkages. This design allows efficient intramolecular charge transfer for strong ECL, and no exogenous poisonous co-reactants are needed. Olefin-linked donor-acceptor conjugated COFs, systematically synthesized by combining non-ECL active monomers with C_2v or C_3v symmetry, exhibit strong ECL signals, which can be boosted by increasing the chain length and conjugation of monomers. The present concept demonstrates that the highly efficient COF-based ECL luminophores can be precisely designed, providing a promising direction toward COF-based ECL phosphors.

Green Nanocomposites for Energy Storage

The green nanocomposites have elite features of sustainable polymers and eco-friendly nanofillers. The green or eco-friendly nanomaterials are low cost, lightweight, eco-friendly, and highly competent for the range of energy applications. This article initially expresses the notions of eco-polymers, eco-nanofillers, and green nanocomposites. Afterward, the energy-related applications of the green nanocomposites have been specified. The green nanocomposites have been used in various energy devices such as solar cells, batteries, light-emitting diodes, etc. The main focus of this artifact is the energy storage application of green nanocomposites. The capacitors have been recognized as corporate devices for energy storage, particularly electrical energy. In this regard, high-performance supercapacitors have been proposed based on sustainable nanocomposites. Consequently, this article presents various approaches providing key knowledge for the design and development of multi-functional energy storage materials. In addition, the future prospects of the green nanocomposites towards energy storage have been discussed.

Bipolar Aggregation-Induced Electrochemiluminescence of Thiophene-Fused Conjugated Microporous Polymers

Herein, we synthesize the thiophene tetraphenylethene-based conjugated microporous polymer (ThT-CMP) using the tetraphenylethylene derivative [i.e., 1,1,2,2-tetrakis(4-bromophenyl)ethane (TPBE)] and 2,5-thiophenediboronic acid as the precursors. The aggregation of TPBE in the ThT-CMP can induce a strong dual-band bipolar electrochemiluminescence (AIECL) emission at 554 nm (anodic) and 559 nm (cathodic) with tri-n-propylamine (TPrA) and S₂O₈^2- as the coreactants, respectively. The anodic and cathodic ECL efficiencies are measured to be 11.49 and 3.82% with respect to the standard of the Ru(bpy)₃²⁺/TPrA system, respectively. We further develop a dipolar ECL sensor to sensitively detect rhodamine B (RhB) based on resonance energy transfer. This ECL sensor possesses a large dynamic range and high sensitivity. This research provides a new avenue of designing organic structures with the characteristic of bipolar AIECL for the development of luminescent devices.

Aggregation-Induced Emission in Electrochemiluminescence: Advances and Perspectives

The discovery of aggregation-induced electrochemiluminescence (AIECL) in 2017 opened new research paths in the quest for novel, more efficient emitters and platforms for biological and environmental sensing applications. The great abundance of fluorophores presenting aggregation-induced emission in aqueous media renders AIECL a potentially powerful tool for future diagnostics. In the short time following this discovery, many scientists have found the phenomenon interesting, with research findings contributing to advances in the comprehension of the processes involved and in attempts to design new sensing platforms. Herein, we explore these advances and reflect on the future directions to take for the development of sensing devices based on AIECL.

Polymer Electrochemiluminescence Featuring Thermally Activated Delayed Fluorescence

Electrochemiluminescence (ECL) based on conjugated polymers or oligomers is persistently being pursued owing to its huge application scope ranging from ultra-sensitive bioanalysis to ultra-resolution imaging and spectroscopy. Because of the theoretical limit in radiative exciton generation yield (typically ∼25 %) of those polymers or oligomers, the corresponding ECL efficiency is still limited, which hampers its ECL performance and its related applications. Herein, we report ECL based on a thermally activated delayed fluorescence (TADF) polymer scaffold, which is characteristic of all-exciton harvesting in the ECL process, and thus potentially capable of achieving ∼100 % ECL efficiency. These desired properties of the TADF polymer ECL is attributed to a fast and efficient up-conversion process from non-radiative triplet to radiative singlet states under thermal activation, which is absent in conventional fluorescent polymers/oligomers, such as F8BT. In this study, various ECL modes, including annihilation or co-reactant mode using TPrA or S₂ O₈ ^2- as co-reactant, are confirmed for our model TADF polymer ECL system, which was different from fluorescent polymer ECL counterpart. Furthermore, solid-state ECL sensing on L-cysteine (an important marker of disease) is also evaluated by using the model TADF polymer. Ultralow detection limit in combination with high sensitivity and good specificity are achieved for this model system, indicative of a high potential of the TADF polymer scaffold for applications in the broad field of ECL.

Electrochemistry and Electrochemiluminescence of Coumarin Derivative Microrods: Mechanism Insights

Organic molecules and related nanomaterials have attracted extensive attention in the realm of electrochemiluminescence (ECL). Herein, a well-known electroluminescence (EL) dopant 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10-(2-benzothiazolyl)quinolizino-[9,9a,1gh] coumarin (C545T) is selected as a new ECL illuminant, which shows a high photoluminescence quantum yield of nearly 100% and excellent ECL performance in the organic phase. For utilizing C545T to achieve ECL detection in aqueous solution, organic microrods of C545T (C545T MRs) were synthesized by a precipitation method. Cyclic voltammetry and differential pulse voltammetry of C545T and C545T MRs in acetonitrile or phosphate buffer showed one reduction and multiple oxidation peaks, suggesting that the multiple charge states of C545T could be produced by continuous electron- or hole-injection processes. The annihilated ECL emission of C545T and C545T MRs was observed using ECL transient technology. In the presence of triethanolamine (TEOA) or potassium persulfate (K₂S₂O₈), C545T MRs can also give bright anodic and cathodic ECL emission at the GCE/water interface. The proposed ECL system not only has multichannel ECL emission but also shows intense yellow emission (569 nm) with a relative ECL efficiency of 0.81 when TEOA was used as a coreactant. Benefiting from the strong ECL emission of the C545T MRs/TEOA system and the quenching effect of dopamine (DA) on ECL, a convenient sensor for DA was developed with high selectivity and sensitivity.

Aggregation-Induced Electrochemiluminescence of Conjugated Pdots Containing a Trace Ir(III) Complex: Insights into Structure-Property Relationships

An approach to the design of iridium(III)-contained polytetraphenylethene Pdots that could exhibit highly efficient electrochemiluminescence (ECL) was proposed. The relationships of ECL performance between the iridium complex-embedded and end-capped aggregation-induced emission (AIE) active Pdots in aqueous media were investigated for the first time. The iridium complexes with cyclometalated ligand 6-phenylphenanthridine (pphent) were incorporated into the copolymers by either embedding (P0, P2-P5) or end-capping (P1) into the backbone via an ancillary 2,2'-bipyridine (bpy) ligand. Subsequently, the corresponding Pdots of P0-P5 encapsulated with poly(styrene-co-maleicanhydride) could be obtained by the nanoprecipitation method. Compared to Pdots0, Pdots2-Pdots5 with (pphent)₂Ir(bpy) (M1) complex embedding, as the iridium complex content increases, ECL signals were decreased in the order of Pdots0 > Pdots2 > Pdots3 > Pdots4 > Pdots5; whereas among these Pdots of P0-P5, Pdots1 with M1 complex end-capping exhibited the highest ECL efficiency (relative to a Ru(bpy)₃²⁺ system of 18.9%) and 4.7-fold enhancement of the ECL signal compared to the parent Pdots of P0, which was mainly attributed to the good film conductivity of the completely conjugated architectures, thus prompting the intramolecular electron transfer. This work opened new avenues for designing highly efficient ECL emitters.