Modulating the pore and electronic structure for targeted recovery of platinum: Accelerated kinetic and reinforced coordination

Adsorption for recovery of low-concentration platinum (Pt) from the complex composition of acidic digestates was challenging because of slow kinetic and poor affinity. It was expected to be overcome by the improvement of pore size distribution and adsorption site activity. Herein, a series of Prussian blue etchings (PBE) with porosity-rich and activity-high cyano (CN) was synthesized to recover low-concentration Pt. The N2 isotherm results showed that the pore structure evolved from mesoporous to microporous. The Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations results revealed that the modulation of electronic structure converted FeII to FeIII in [FeII(CN)6]4-. The coexistence of micro- and meso-pore structures provided channels to accelerate adsorption and ensured PtII enrichment. The regulation of Fe valence state activated CN, which reinforced the strength of coordination interaction between Pt and Fe-CN- at N-atom. The adsorption rate and maximum capacity of PBE1 were 4.4 and 2.5 times higher than those of PB, respectively, due to the dual efficacy of accelerated kinetic and reinforced coordination. This study systematically analyzes the pivotal role of pore and electronic structure modulation in adsorption kinetic and affinity, which provides a novel strategy for PtII targeted recovery.

A reliable and selective ratiometric sensing probe for fluorometric determination of P2O74- based on AIE of GSH@CuNCs-assisted by Al-N@CQDs

In this study, a novel composite material was developed for the ratiometric detection of pyrophosphate anion (P2O74-). This composite consisted of Al and nitrogen co-doped carbon dots (Al-N@CQDs) and glutathione-capped copper nanoclusters (GSH@CuNCs). The Al-N@CQDs component, with its high reserved coordination capacity of Al3+, induced the non-luminescent behavior of GSH@CuNCs, resulting in an aggregation-induced emission (AIE) effect. The hybrid material (Al-N@CQDs/GSH@CuNCs) exhibited dual-emission signals at 620 nm and 450 nm after integrating the two independent materials utilizing the AIE effect and the fluorescence resonance energy transfer (FRET) approach. This approach represents the first utilization of this composite for ratiometric detection. Nevertheless, upon the addition of P2O74-, the AIE and FRET processes were hindered due to the higher coordination interaction of Al3+ towards P2O74- compared to the amino/carboxyl groups on Al-N@CQDs. This successful interference of the AIE and FRET processes allowed for the effective estimation of P2O74-. The response ratio (F450/F620) increased with increasing the concentration of P2O74- in the range of 0.035-160 µM, with an impressive detection limit of 0.012 µM. This innovative approach of utilizing hybrid CQDs/thiolate-capped nanoclusters as a ratiometric fluorescent sensor for analytical applications introduces new possibilities in the field. The as-fabricated system was successfully applied to detect P2O74- in different real samples such as water, serum, and urine samples with acceptable results.

Preparation of N-doped porous biochar with high specific surface area and its efficient adsorption for mercury ion from aqueous solution

Herein, a new type of super active nitrogen-doped biochar sheet (SNBC) was prepared by two-step pyrolysis and KOH chemical activation with melamine and cherry kernel powder as precursors of nitrogen and carbon source for removing Hg2+ from wastewater. The N2 adsorption/desorption and scanning electron microscope characterization revealed that the resulted SNBC under 600 °C calcination owned huge specific surface area of 2828 m2/g and plenty of well-developed micropores, and X-ray photoelectron spectroscopy and Fourier transform-infrared spectroscopy analysis testified the existence of functional groups containing N and O, which could provide adsorption sites for Hg2+. The SNBC-600 showed high adsorption capacity for Hg2+ even at low pH, and interfering cations had little effect on the adsorption. The adsorption process was rapid and dynamic data fit the pseudo-second-order dynamic model well. The maximum adsorption capacity of Hg2+ on SNBC-600 calculated by Langmuir model was 230 mg/g. After six times of reuse, the adsorption capacity still exceeded 200 mg/g, exhibiting good reusability. The designed microfiltration membrane device base on SNBC-600 could remove low concentration of Hg2+ effectively from solution. This study provided a simple and environment-friendly method for manufacturing nitrogen-doped biochar sheet, which was of great significance in the practical application of Hg2+ pollution treatment.

Roles and gains of coordination chemistry in nanofiltration membrane: A review

The nanofiltration (NF) membranes with the specific separation accuracy for molecules with the size of 0.5-2 nm have been applied in various industries. However, the traditional polymeric NF membranes still face problems like the trade-off effect, organic solvent consumption, and weak durability in harsh conditions. The participation of coordination action or metal-organic coordination compounds (MOCs) brings the membrane with uniform pores, better antifouling properties, and high hydrophilicity. Some of the aqueous-phase reactions also help to introduce a green fabrication process to NF membranes. This review critically summarizes the recent research progress in coordination chemistry relevant NF membranes. The participation of coordination chemistry was classified by the various functions in NF membranes like additives, interlayers, selective layers, coating layers, and cross-linkers. Then, the effect and mechanism of the coordination chemistry on the performance of NF membranes are discussed in depth. Perspectives are given for the further promotion that coordination chemistry can make in NF processes. This review also provides comprehensive insight and constructive guidance on high-performance NF membranes with coordination chemistry.

In situ coordination interactions between metal-organic framework nanoemitters and coreactants for enhanced electrochemiluminescence in biosensing

Coreactant electrochemiluminescence (ECL) is one of the most popular pathways in commercial analysis, which can provide simplicity and convenience for getting intense ECL emission. However, the low efficiency of intermolecular electron transfer could weaken ECL intensity. In this work, we developed an enhanced ECL strategy through in situ coordination interactions between metal-organic framework emitters and coreactants. First, a metal-organic framework (MOF) emitter was synthesized with 1,1,2,2-tetrakis(4-(pyridin-4-yl)phenyl)ethane (TPPE) as aggregation-induced emission linkers and Zn as nodes. Interestingly, compared to TPPE ligand, the resulted MOF nanoemitters demonstrated 49.5 folds enhancement of ECL emission in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO) as the coreactant. More significantly, different from the constant ECL intensity using TPrA coreactant, DABCO exhibited time-dependent ECL intensity due to the intrareticular electron transfer through coordination interaction between DABCO and Zn²⁺, which was confirmed by X-ray photoelectron spectroscopy and Fourier transform infrared spectral experiments. The enhanced ECL was then applied to construct a sensitive ECL method to detect dopamine in serum samples. The coordination interaction between emitters and coreactants not only provides a universal way to enhance ECL, but also expands the applications of coreactant ECL system in convenience route.

Interpenetrating polysaccharide-based hydrogel: A dynamically responsive versatile medium for precisely controlled synthesis of nanometals

Herein, we reported an interpenetrating polysaccharide-based hydrogel in which carboxymethyl chitosan (CMC) chains were physically dispersed throughout the thermoplastic elastomer gel network has been developed as a versatile platform for precisely controlled synthesis of nanometals. Results indicated the interpenetrated CMC chains could serve as multifunctional fillers for metal ions adsorption and stabilization while the thermally reconfigurable agarose (Agar) gel medium provides three-dimensional semi-solid framework for entrapping and recollecting of the fabricated nanometals. Specifically, the CMC chains were found to strongly coordinate with silver ions as a dynamically responsive metal-biopolymer complex within the bulk gel network as confirmed by the enhanced mechanical properties and regulated shape memory performances. Moreover, by varying CMC concentrations and coupling with a layer-stacking approach, multiple biochemical gradients could be facilely generated for in-situ synthesis of silver nanoparticles, achieving a narrow size of ~7 nm, confined sphere-shape and high concentrations. The monodispersed nanometals are confirmed to be highly active (e.g., considerable catalytic performance), and which could be easily recycled from the bulk gel system via a heating treatment. Thus, this work would provide a generic methodology for the multifunctional metallogel assembly and great possibility for controllable and largescale synthesis of noble nanometals toward biomedical applications.

Efficient co-removal of copper and tetracycline from aqueous solution by using permanent magnetic cation exchange resin

This work aimed to examine a permanent magnetic cation-exchange resin (MCER) for synergistic co-removal of Cu(II) and tetracycline (TC) from their mixed solutions. Batch adsorption experiments and characterizations were performed to elucidate the adsorption mechanisms. The adsorption of Cu(II) followed the Langmuir isotherm model in most cases, while Freundlich isotherm model was more suitable for fitting TC adsorption, which was due to the surface coordination between adsorbed Cu(II) and TC and the formation of multilayer MCER-Cu-TC complexes. The equilibrium TC adsorption amount in binary Cu/TC system was about 5.5-13.5 times of that in sole system, whereas Cu(II) uptake was nearly unchanged. Decomplexing-bridging was ascribed as the primary mechanism, which involved the [Cu-TC] decomplexing and [resin-Cu] bridging for TC uptake. Moreover, these MCER microbeads could be reused with negligible loss in adsorption capacity during five adsorption-desorption cycles, indicative of great potential in synergistic co-removal of organics-Cu complexes from aqueous solutions.

Nitrogen, phosphorus and sulfur tri-doped carbon dots are specific and sensitive fluorescent probes for determination of chromium(VI) in water samples and in living cells

A rapid, sensitive, and selective fluorometric assay is described for the determination of chromium(VI) in real waters and living cells. The method is making use of nitrogen, phosphorus, and sulfur tri-doped carbon dots (NPS-CDs) which have absorption/emission maxima at 360/505 nm/nm. Cr(VI) has an absorption maximum at 350 nm and causes an inner filter effect (IFE) on the blue fluorescence of the NPS-CDs. The NPS-CDs were hydrothermally synthesized using p-aminobenzenesulfonic acid and tetrakis(hydroxymethyl)phosphonium chloride as precursors. The NPS-CDs were characterized by transmission electron microscopy, X-ray diffraction, and several spectroscopic methods. They are biocompatible and negligibly cytotoxic when tested with HeLa cells and MCF-7 cells even after 48 h of incubation. The NPS-CDs were used as fluorescent probes for Cr(VI). The detection limit is 0.23 μM (three times standard deviation versus slope), and the linear response covers the 1 to 500 μM chromate concentration range. The NPS-CDs were applied to the determination of Cr(VI) in real waters and living cells (HeLa and MCF-7) and gave satisfying results. Graphical abstractSchematic representation of hydrothermal synthesis of nitrogen, phosphorus, and sulfur tri-doped carbon dots (NPS-CDs) for Cr(VI) detection via inner filter effect (IFE). NPS-CDs were applied to the determination of Cr(VI) in living cells (HeLa and MCF-7) with satisfying results.

A label-free fluorescent probe for the detection of adenosine 5'‑triphosphate via inhibiting the aggregation-induced emission enhancement of glutathione modified silver nanoclusters triggered by zinc ion

It is important to establish sensitive and simple analysis methods for adenosine 5'‑triphosphate (ATP). A label-free fluorescent probe for the determination of ATP was constructed based on glutathione modified silver nanoclusters (AgNCs/GSH). AgNCs/GSH showed aggregation-induced emission enhancement (AIEE) property in the organic solvent. The effects of metal ions on the fluorescence of AgNCs/GSH were also studied. Only zinc ion enhanced the fluorescence of AgNCs/GSH obviously. This was because Zn²⁺ coordinated with AgNCs/GSH to cause the aggregation of AgNCs/GSH, which was sufficiently proved by TEM. With the addition of ATP, Zn²⁺ bound with ATP through ZnOP bond and the binding between Zn²⁺ and AgNCs/GSH was inhibited. Hence the fluorescence of AgNCs/GSH was decreased with increasing the ATP concentration. The fluorescence response was linear in the ATP concentration range of 1-110 μM, and the detection limit was 0.8 μM. Then this method was successfully applied for determining ATP in the samples of human urine and rat serum, the recoveries were in the range of 97.6%-103%.

Immobilization of zirconium-glycerolate nanowires on magnetic nanoparticles for extraction of urinary ribonucleosides

The authors have immobilized nanowires made from zirconium glycerolate (ZrGly) on magnetite (Fe₃O₄) nanoparticles by applying a solvothermal growth process using metal-glycerolate as a precursor. The structure and the dissolution-recrystallization mechanism of the resulting Fe₃O₄@ZrGly composite were investigated by attenuated total reflection-FTIR, energy-dispersive X-ray analysis, thermogravimetric analysis and solid-state cross polarization/magic angle spinning ¹³C NMR spectroscopy. The interaction between the zirconium glycerolate in Fe₃O₄@ZrGly and cis-diols leads to efficient adsorption of riboncleosides which then can be quantified by HPLC with UV detection. The sorbent was successfully applied to the selective enrichment of adenosine, cytidine, uridine and guanosine from spiked human urine samples. The detection limit of the method is in the range from 1.7 to 19 ng·mL^-1 of nucleosides in spiked human urine, with relative standard deviations of lower than 12.4% and recoveries ranging from 90.6 to 113%. Graphical abstract Fe₃O₄@ZrGly with high selectivity towards ribonucleosides was designed and applied for quantitation of urinary ribonucleosides.

The interaction of a cobalt porphyrin with cancer-associated nitrosamines

A cobalt porphyrin (CY-B) was presented, and its interaction with tobacco-specific nitrosamines (TSNAs) was investigated by UV-Vis spectroscopy and high-resolution mass spectrometry. The results revealed that the stoichiometry of the host-guest interaction was 1:2 and that the binding constant between CY-B and TSNAs was within the range of 0.78×10(8)-7.83×10(8)M(-2). The coordination strength between CY-B and TSNAs decreased in the sequence of NNN>NAB>NAT>NNK based on the binding constant. The interaction mechanism of CY-B with TSNAs involved a coordination interaction, and the π-π interaction between the porphyrin macrocycle and the aromatic frame of the TSNAs pyridines may also have been a driving force. The measured thermodynamic properties demonstrated that the reaction of CY-B with TSNAs was spontaneous and that the driving force for the interaction was a change in enthalpy. The reaction was exothermic, and an increasing temperature inhibited the interaction. The IR spectrum of the complex revealed that the NNO group of TSNAs and the metal cobalt of CY-B formed the six-coordinate complex.