Formulation of Metal-Organic Framework Inks for the 3D Printing of Robust Microporous Solids toward High-Pressure Gas Storage and Separation

Virucidal activity of porphyrin-based metal-organic frameworks against highly pathogenic coronaviruses and hepatitis C virus

The antiviral effect of four porphyrin-based Metal-Organic Frameworks (PMOFs) with Al and Zr, namely Al-TCPP, PCN-222, PCN-223 and PCN-224 was assessed for the first time against HCoV-229E, two highly pathogenic coronaviruses (SARS-CoV-2 and MERS-CoV) and hepatitis C virus (HCV). Infection tests in vitro were done under dark or light exposure for different contact times, and it was found that 15 min of light exposure were enough to give antiviral properties to the materials, therefore inactivating HCoV-229E by 99.98 % and 99.96 % for Al-TCPP and PCN-222. Al-TCPP diminished the viral titer of SARS-CoV-2 greater than PCN-222 in the same duration of light exposure, having an effect of 99.95 % and 93.48 % respectively. Next, Al-TCPP was chosen as the best candidate possessing antiviral properties and was tested against MERS-CoV and HCV, showcasing a reduction of infectivity of 99.28 % and 98.15 % respectively for each virus. The mechanism of the antiviral activity of the four PMOFs was found to be the production of singlet oxygen 1O2 from the porphyrin ligand TCPP when exposed to visible light, by using sodium azide (NaN3) as a scavenger, that can later attack the phospholipids on the envelope of the viruses, thus preventing their entry into the cells.

3D-Printed MOF Monoliths: Fabrication Strategies and Environmental Applications

Metal-organic frameworks (MOFs) have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials, thanks to their large specific surface area, high porosity, tailorable structures and compositions, diverse functionalities, and well-controlled pore/size distribution. However, most developed MOFs are in powder forms, which still have some technical challenges, including abrasion, dustiness, low packing densities, clogging, mass/heat transfer limitation, environmental pollution, and mechanical instability during the packing process, that restrict their applicability in industrial applications. Therefore, in recent years, attention has focused on techniques to convert MOF powders into macroscopic materials like beads, membranes, monoliths, gel/sponges, and nanofibers to overcome these challenges.Three-dimensional (3D) printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models. Therefore, this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications, emphasizing water treatment and gas adsorption/separation applications. Herein, the various strategies for the fabrication of 3D-printed MOF monoliths, such as direct ink writing, seed-assisted in-situ growth, coordination replication from solid precursors, matrix incorporation, selective laser sintering, and digital light processing, are described with the relevant examples. Finally, future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure, composition, and textural properties of 3D-printed MOF monoliths.

Revisiting Metal-Organic Frameworks Porosimetry by Positron Annihilation: Metal Ion States and Positronium Parameters

Metal-organic frameworks (MOFs) stand as pivotal porous materials with exceptional surface areas, adaptability, and versatility. Positron Annihilation Lifetime Spectroscopy (PALS) is an indispensable tool for characterizing MOF porosity, especially micro- and mesopores in both open and closed phases. Notably, PALS offers porosity insights independent of probe molecules, which is vital for detailed characterization without structural transformations. This study explores how metal ion states in MOFs affect PALS results. We find significant differences in measured porosity due to paramagnetic or oxidized metal ions compared to simulated values. By analyzing CPO-27(M) (M = Mg, Co, Ni), with identical pore dimensions, we observe distinct PALS data alterations based on metal ions. Paramagnetic Co and Ni ions hinder and quench positronium (Ps) formation, resulting in smaller measured pore volumes and sizes. Mg only quenches Ps, leading to underestimated pore sizes without volume distortion. This underscores the metal ions' pivotal role in PALS outcomes, urging caution in interpreting MOF porosity.

Challenges and Opportunities in Preserving Key Structural Features of 3D-Printed Metal/Covalent Organic Framework

Metal-organic framework (MOF) and covalent organic framework (COF) are a huge group of advanced porous materials exhibiting attractive and tunable microstructural features, such as large surface area, tunable pore size, and functional surfaces, which have significant values in various application areas. The emerging 3D printing technology further provides MOF and COFs (M/COFs) with higher designability of their macrostructure and demonstrates large achievements in their performance by shaping them into advanced 3D monoliths. However, the currently available 3D printing M/COFs strategy faces a major challenge of severe destruction of M/COFs' microstructural features, both during and after 3D printing. It is envisioned that preserving the microstructure of M/COFs in the 3D-printed monolith will bring a great improvement to the related applications. In this overview, the 3D-printed M/COFs are categorized into M/COF-mixed monoliths and M/COF-covered monoliths. Their differences in the properties, applications, and current research states are discussed. The up-to-date advancements in paste/scaffold composition and printing/covering methods to preserve the superior M/COF microstructure during 3D printing are further discussed for the two types of 3D-printed M/COF. Throughout the analysis of the current states of 3D-printed M/COFs, the expected future research direction to achieve a highly preserved microstructure in the 3D monolith is proposed.

Recombinant streptococcal protein G-modified metal-organic framework ZIF-8 for the highly selective purification of immunoglobulin G from human serum

A novel solid phase extractant His-rSPG@ZIF-8 was prepared by covalently coupling recombinant streptococcal protein G (His-rSPG) with ZIF-8. The His-rSPG@ZIF-8 composite was characterized by Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy (Raman), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Due to the specific binding between the immunoglobulin binding region of His-rSPG and the Fc region of immunoglobulin G (IgG), the His-rSPG@ZIF-8 composite demonstrated exceptional selectivity in adsorbing IgG. In Britton-Robinson buffer (BR buffer) with a salt concentration of 500 mmol L-1 (0.04 mol L-1, pH 8.0), the His-rSPG@ZIF-8 composite exhibited a remarkable adsorption efficiency of 99.8 % for 0.05 mg of the composite on 200 μL of IgG solution (100 μg mL-1). The adsorption behavior of the His-rSPG@ZIF-8 composite aligns with the Langmuir adsorption model, and the theoretical maximum adsorption capacity is 1428.6 mg g-1. The adsorbed IgG molecules were successfully eluted using a SDS solution (0.5 %, m/m), resulting in a recovery rate of 91.2 %. Indeed, the His-rSPG@ZIF-8 composite was successfully utilized for the isolation and purification of IgG from human serum samples. The obtained IgG exhibited high purity, as confirmed by SDS-PAGE analysis. Additionally, LC-MS/MS analysis was employed to identify the human serum proteins following the adsorption and elution process using the His-rSPG@ZIF-8 composite material. The results revealed that the recovered solution contained an impressive content of immunoglobulin, accounting for 62.4 % of the total protein content. Furthermore, this process also led to the significant enrichment of low abundance proteins such as Serpin B4 and Cofilin-1. Consequently, the His-rSPG@ZIF-8 composite holds great promise for applications such as IgG purification and immunoassays. At the same time, it expands the application of metal-organic frameworks in the field of proteomics.

In Situ Growth of MOF-303 Membranes onto Porous Anodic Aluminum Oxide Substrates for Harvesting Salinity-Gradient Energy

As an emerging metal-organic framework (MOF) material in recent years, the MOF-303 membrane has shown great potential applications in seawater desalination, dehydration, and atmospheric water harvesting. Herein, we report on a dense and uniform MOF-303 membrane fabricated by a facile in situ hydrothermal synthesis approach in the presence of an anodized aluminum oxide (AAO) channel membrane acting as the only Al source and substrate. Interestingly, the MOF-303 isomer can be obtained due to an insufficient amount of organic ligand caused by the less hydrophilic and larger pore size of the AAO substrate. The MOF-based composite membranes possessed surface-charge-governed ionic transport behavior. Moreover, the MOF-303/AAO membrane yielded an output power density of 1.87 W/m2 under a 50-fold KCl concentration gradient. Under a 50-fold gradient of artificial seawater and river water, a maximum power density of 1.46 W/m2 can be obtained. After 30 days of stability testing, the composite membrane still maintained the power output, and the power density was higher than 1.20 W/m2. This work provides a facile and effective strategy for constructing Al-based MOF composite membranes and boosts their applications in harvesting salinity-gradient energy.

Enhanced Gas Adsorption in HKUST-1@Chitosan Aerogels, Cryogels, and Xerogels: An Evaluation Study

This study investigates the use of chitosan hydrogel microspheres as a template for growing an extended network of MOF-type HKUST-1. Different drying methods (supercritical CO2, freeze-drying, and vacuum drying) were used to generate three-dimensional polysaccharide nanofibrils embedding MOF nanoclusters. The resulting HKUST-1@Chitosan beads exhibit uniform and stable loadings of HKUST-1 and were used for the adsorption of CO2, CH4, Xe, and Kr. The maximum adsorption capacity of CO2 was found to be 1.98 mmol·g-1 at 298 K and 1 bar, which is significantly higher than those of most MOF-based composite materials. Based on Henry's constants, thus-prepared HKUST-1@CS beads also exhibit fair selectivity for CO2 over CH4 and Xe over Kr, making them promising candidates for capture and separation applications.

Recent Progress and Perspectives of Direct Ink Writing Applications for Mass Transfer Enhancement in Gas-Phase Adsorption and Catalysis

Conventional adsorbents and catalysts shaped by granulation or extrusion have high pressure drop and poor flexibility for chemical, energy, and environmental processes. Direct ink writing (DIW), a kind of 3D printing, has evolved into a crucial technique for manufacturing scalable configurations of adsorbents and catalysts with satisfactory programmable automation, highly optional materials, and reliable construction. Particularly, DIW can generate specific morphologies required for excellent mass transfer kinetics, which is essential in gas-phase adsorption and catalysis. Here, DIW methodologies for mass transfer enhancement in gas-phase adsorption and catalysis, covering the raw materials, fabrication process, auxiliary optimization methods, and practical applications are comprehensively summarized. The prospects and challenges of DIW methodology in realizing good mass transfer kinetics are discussed. Ideal components with a gradient porosity, multi-material structure, and hierarchical morphology are proposed for future investigations.

Confinement effect of ionic liquid: Improve of the extraction performance of parent metal organic framework for phthalates

In order to better identify the hazards of pollutants, developing the analytical methods that can sensitively detect and precisely monitor the content of trace pollutants has been the constant pursuit. In this paper, a new solid phase microextraction coating-ionic liquid/metal organic framework (IL/MOF) was obtained through the IL-induced strategy and used for the solid phase microextraction (SPME) process. IL was introduced into metal-organic framework (MOF) cage based on the anion of ionic liquid could interact strongly with the zirconium nodes of UiO-66-NH₂. The introduction of IL not only increased the stability of composite, the hydrophobicity of IL also changed the environment of MOF channel, providing the hydrophobic effect to the targets. The confinement effect of IL effectively improved the extraction performance of parent MOF and the extraction performance of synthesized IL/UiO-66-NH₂ for phthalates (PAEs) were 1.3-3.0 times that of parent UiO-66-NH₂. Thanks to the strong interaction force (hydrogen bonding interaction, π-π stacking, hydrophobic interaction force), the IL/UiO-66-NH₂-coated fiber coupled with gas chromatography-mass spectrometer showed a wide linear ranges (1-5000 ng L^-1) with good correlation (R², 0.9855-0.9987), lower detection limit (0.2-0.4 ng L^-1) and satisfactory recoveries (95.3-119.3%) for PAEs. This article is dedicated to provide another way to improve the extraction performance of material.

Brittle-to-ductile transition and theoretical strength in a metal-organic framework glass

Metal-organic framework (MOF) glasses, a new type of melt-quenched glass, show great promise to deal with the alleviation of greenhouse effects, energy storage and conversion. However, the mechanical behavior of MOF glasses, which is of critical importance given the need for long-term stability, is not well understood. Using both micro- and nanoscale loadings, we find that pillars of a zeolitic imidazolate framework (ZIF) glass have a compressive strength falling within the theoretical strength limit of ≥E/10, a value which is thought to be unreachable in amorphous materials. Pillars with a diameter larger than 500 nm exhibited brittle failure with deformation mechanisms including shear bands and nearly vertical cracks, while pillars with a diameter below 500 nm could carry large plastic strains of ≥20% in a ductile manner with enhanced strength. We report this room-temperature brittle-to-ductile transition in ZIF-62 glass for the first time and demonstrate that theoretical strength and large ductility can be simultaneously achieved in ZIF-62 glass at the nanoscale. Large-scale molecular dynamics simulations have identified that microstructural densification and atomistic rearrangement, i.e., breaking and reconnection of inter-atomistic bonds, were responsible for the exceptional ductility. The insights gained from this study provide a way to manufacture ultra-strong and ductile MOF glasses and may facilitate their processing toward real-world applications.

A highly robust cluster-based indium(III)-organic framework with efficient catalytic activity in cycloaddition of CO2 and Knoevenagel condensation

The efficient catalytic performance displayed by MOFs is decided by an appropriate charge/radius ratio of defect metal sites, large enough solvent-accessible channels and Lewis base sites capable of polarizing substrate molecules. Herein, the solvothermal self-assembly led to a highly robust nanochannel-based framework of {[In₄(CPDD)₂(μ₃-OH)₂(DMF)(H₂O)₂]·2DMF·5H₂O}_n (NUC-66) with a 56.8% void volume, which is a combination of a tetranuclear cluster [In₄(μ₃-OH)₂(COO)₁₀(DMF)(H₂O)₂] (abbreviated as {In₄}) and a conjugated tetracyclic pentacarboxylic acid ligand of 4,4'-(4-(4-carboxyphenyl)pyridine-2,6-diyl)diisophthalic acid (H₅CPDD). To the best of our knowledge, NUC-66 is a rarely reported {In₄}-based 3D framework with embedded hierarchical triangular-microporous (2.9 Å) and hexagonal-nanoporous (12.0 Å) channels, which are shaped by six rows of {In₄} clusters. After solvent exchange and vacuum drying, the surface of nanochannels in desolvated NUC-66a is modified by unsaturated In³⁺ ions, N_pyridine atoms and μ₃-OH groups, all of which display polarization ability towards polar molecules due to their Lewis acidity or basicity. The catalytic experiments performed showed that NUC-66a had high catalytic activity in the cycloaddition reactions of epoxides with CO₂ under mild conditions, which should be ascribed to its structural advantages including nanoscale channels, rich bifunctional active sites, large surface areas and chemical stability. Moreover, NUC-66a, as a heterogeneous catalyst, could greatly accelerate the Knoevenagel condensation reactions of aldehydes and malononitrile. Hence, this work confirms that the development of rigid nanoporous cluster-based MOFs built on metal ions with a high charge and large radius ratio will be more likely to realize practical applications, such as catalysis, adsorption and separation of gas, etc.

Hybrid Metal-Organic Frameworks/Carbon Fibers Reinforcements for Additively Manufactured Composites

Additively manufactured (AM) composites based on short carbon fibers possess strength and stiffness far less than their continuous fiber counterparts due to the fiber's small aspect ratio and inadequate interfaces with the epoxy matrix. This investigation presents a route for preparing hybrid reinforcements for AM that comprise short carbon fibers and nickel-based metal-organic frameworks (Ni-MOFs). The porous MOFs furnish the fibers with tremendous surface area. Additionally, the MOFs growth process is non-destructive to the fibers and easily scalable. This investigation also demonstrates the viability of using Ni-based MOFs as a catalyst for growing multi-walled carbon nanotubes (MWCNTs) on carbon fibers. The changes to the fiber were examined via electron microscopy, X-ray scattering techniques, and Fourier-transform infrared spectroscopy (FTIR). The thermal stabilities were probed by thermogravimetric analysis (TGA). Tensile and dynamic mechanical analysis (DMA) tests were utilized to explore the effect of MOFs on the mechanical properties of 3D-printed composites. Composites with MOFs exhibited improvements in stiffness and strength by 30.2% and 19.0%, respectively. The MOFs enhanced the damping parameter by 700%.

Selective Luminescence Turn-On-Based Sensing of Phosphate in the Presence of Other Interfering Anions Using a Heterobimetallic (3d-4d) MOF with an Acidic Pocket

A luminescent metal-organic framework with the molecular formula [YMn_1.5(C₇N₁H₃O₅)₃(H₂O)₆]·11H₂O, 1 {where C₇N₁H₃O₅ = chelidamate}, was synthesized by a hydrothermal method by employing chelidamic acid as an organic ligand and Y(III) and Mn(II) as metal ions. A two-dimensional heterobimetallic structure with phenolic hydroxyl-functionalized pockets was revealed by single-crystal X-ray diffraction analysis of compound 1. PXRD, TGA, IR, BET analysis, and UV-vis spectroscopy were used for the thorough characterization of compound 1. Upon excitation at 280 nm, compound 1 shows bright blue emission, which was utilized for the selective and sensitive turn-on detection of the PO₄^3- ion. Based on Bronsted-Lowry acid-base interactions, the photoluminescence of compound 1 was enhanced in the presence of very low concentrations of the aforementioned anion. The mechanism behind the detection of the phosphate ion has been explored in detail. It was seen that the PO₄^3- anion entered the hydroxyl-functionalized pockets of compound 1 and stabilized the aromatic portion of compound 1 via molecular-level interactions through acid-base interactions. These molecular-level interactions are responsible for the enhancement of the photoluminescence intensity of compound 1 after the incorporation of phosphate ions by reducing the nonradiative transitions. These phenomena were also confirmed by time-correlated single photon counting (TCSPC) measurement, which shows that the excited-state lifetime increased with the increase in addition of phosphate anions. The calculated limit of detection (LOD) of 1 was 19.55 ppb for phosphate (PO₄^3-), which was significantly lesser than the recommended level for the PO₄^3-anion toward the human body. The luminescence enhancement coefficient, K_SV, value was also much higher than those of other reported metal-organic frameworks.

Synthesis and shaping of metal-organic frameworks: a review

Metal-organic frameworks (MOFs) possess excellent advantages, such as high porosity, large specific surface area, and an adjustable structure, showing good potential for applications in gas adsorption and separation, catalysis, conductivity, sensing, magnetism, etc. However, they still suffer from significant limitations in terms of the scale-up synthesis and shaping, hindering the realization of large-scale commercial applications. Despite some attempts having been devoted to addressing this, challenges remain. In this paper, we outline the advantages and drawbacks of existing synthetic routes such as electrochemistry, microwave, ultrasonic radiation, green solvent reflux, room temperature stirring, steam-assisted transformation, mechanochemistry, and fluid chemistry in terms of scale-up production. Then, the shaping methods of MOFs such as extrusion, mechanical compaction, rolling granulation, spray drying, gel technology, embedded granulation, phase inversion, 3D printing and other shaping methods for the preparation of membranes, coatings and nanoparticles are discussed. Finally, perspectives on the large-scale synthesis and shaping of MOFs are also proposed. This work helps provide in-depth insight into the scale-up production and shaping process of MOFs and boost commercial applications of MOFs.

Nickel and iron-based metal-organic frameworks for removal of organic and inorganic model contaminants

Metal-organic frameworks (MOFs) are a promising class of porous nanomaterials in the field of environmental remediation. Ni-MOF and Fe-MOF were chosen for their advantages such as structural robustness and ease of synthesis route. The structure of prepared MOFs was characterized using FE-SEM, XRD, FTIR, and N₂ adsorption-desorption. The efficiency of MOFs to remove organic model contaminants (anionic Alizarin Red S (ARS) and cationic malachite green (MG) and inorganic fluoride was studied. Fe-MOF and Ni-MOF adsorbed 67, 88, 6% and 32, 5, and 9% of fluoride, ARS, and MG, respectively. Further study on ARS adsorption by Fe-MOF showed that the removal efficiency was high in a wide range of pH from 3 to 9. Moreover, dye removal was directly increased by adsorbent mass (0.1-0.75 g/L) and decreased by ARS concentration (25-100 mg/L). The pseudo-first-order kinetic model and Langmuir isotherm model with a q_max of 176.68 mg/g described the experimental data well. The separation factor, K_L, was in the range of 0-1, which means the adsorption process was favorable. In conclusion, Fe-MOF showed remarkable adsorption of organic and inorganic model contaminants.

3D Printing of Metal-Organic Framework-Based Ionogels: Wearable Sensors with Colorimetric and Mechanical Responses

Soft ionotronics are emerging materials as wearable sensors for monitoring physiological signals, sensing environmental hazards, and bridging the human-machine interface. However, the next generation of wearable sensors requires multiple sensing capabilities, mechanical toughness, and 3D printability. In this study, a metal-organic framework (MOF) and three-dimensional (3D) printing were integrated for the synthesis of a tough MOF-based ionogel (MIG) for colorimetric and mechanical sensing. The ink for 3D printing contained deep eutectic solvents (DESs), cellulose nanocrystals (CNCs), MOF crystals, and acrylamide. After printing, further photopolymerization resulted in a second covalently cross-linked poly(acrylamide) network and solidification of MIG. As a porphyrinic Zr-based MOF, MOF-525 served as a functional filler to provide sharp color changes when exposed to acidic compounds. Notably, MOF-525 crystals also provided another design space to tune the printability and mechanical strength of MIG. In addition, the printed MIG exhibited high stability in the air because of the low volatility of DESs. Thereafter, wearable auxetic materials comprising MIG with negative Poisson's ratios were prepared by 3D printing for the detection of mechanical deformation. The resulting auxetic sensor exhibited high sensitivity via the change in resistance upon mechanical deformation and a conformal contact with skins to monitor various human body movements. These results demonstrate a facile strategy for the construction of multifunctional sensors and the shaping of MOF-based composite materials.

Reactive Extrusion Printing for Simultaneous Crystallization-Deposition of Metal-Organic Framework Films

Reactive extrusion printing (REP) is demonstrated as an approach to simultaneously crystallize and deposit films of the metal-organic framework (MOF) Cu3 btc2 (btc=1,3,5-benzenetricarboxylate), also known as HKUST-1. The technique co-delivers inks of the copper(II) acetate and H3 btc starting materials directly on-surface and on-location for rapid nucleation into films at room temperature. The films were analyzed using PXRD, profilometry, SEM and thermal analysis techniques and confirmed high-quality Cu3 btc2 films are produced in low-dispersity interconnected nanoparticulate form. The porosity was examined using gas adsorption which showed REP gives Cu3 btc2 films with open interconnected pore structures, demonstrating the method bestows features that traditional synthesis does not. REP is a technique that opens the field to time-efficient large-scale fabrication of MOF interfaces and should find use in a wide variety of coating application settings.

Extrusion-Spheronization of UiO-66 and UiO-66_NH2 into Robust-Shaped Solids and Their Use for Gaseous Molecular Iodine, Xenon, and Krypton Adsorption

The use of an extrusion-spheronization process was investigated to prepare robust and highly porous extrudates and granules starting from UiO-66 and UiO-66_NH₂ metal-organic framework powders. As-produced materials were applied to the capture of gaseous iodine and the adsorption of xenon and krypton. In this study, biosourced chitosan and hydroxyethyl cellulose (HEC) are used as binders, added in low amounts (less than 5 wt % of the dried solids), as well as a colloidal silica as a co-binder when required. Characterizations of the final shaped materials reveal that most physicochemical properties are retained, except the textural properties, which are impacted by the process and the proportion of binders (BET surface area reduction from 5 to 33%). On the other hand, the mechanical resistance of the shaped materials toward compression is greatly improved by the presence of binders and their respective contents, from 0.5 N for binderless UiO-66 granules to 17 N for UiO-66@HEC granules. UiO-66_NH₂-based granules demonstrated consequent iodine capture after 48 h, up to 527 mg/g, in line with the pristine UiO-66_NH₂ powder (565 mg/g) and proportionally to the retaining BET surface area (-5% after shaping). Analogously, the shaped materials presented xenon and krypton sorption isotherms correlated to their BET surface area and high predicted xenon/krypton selectivity, from 7.1 to 9.0. Therefore, binder-aided extrusion-spheronization is an adapted method to produce shaped solids with adequate mechanical resistance and retained functional properties.

Meniscus-Guided 3D Microprinting of Pure Metal-Organic Frameworks with High Gas-Uptake Performance

Metal-organic frameworks (MOFs) are a promising nanoporous functional material system; however, the practicality of shaping freeform MOF monoliths, while retaining their porosity, remains a challenge. Here, we demonstrate that meniscus-guided three-dimensional (3D) printing can produce pure MOF monoliths with high gas-uptake performance. The method exploits a femtoliter precursor ink meniscus to highly confine and guide supersaturation-driven crystallization in a layer-by-layer manner to print a pure HKUST-1 micro-monolith with a high spatial resolution of <3 μm. The proposed 3D printing technique does not involve rheological additives, binders, or mechanical forces. Thus, the resulting HKUST-1 monolith displays a prominently high Brunauer-Emmett-Teller surface area of 1192 m²/g, which is superior to monoliths produced using other 3D printing approaches. This technique enables both structural design freedom and high material performance in the manufacturing of MOFs for practical use.

3D-Printed Fe/γ-Al2O3 Monoliths from MOF-Based Boehmite Inks for the Catalytic Hydroxylation of Phenol

The synthesis of dihydroxybenzenes (DHBZ), essential chemical reagents in numerous industrial processes, with a high degree of selectivity and yield from the hydroxylation of phenol is progressively attracting great interest in the catalysis field. Furthermore, the additive manufacturing of catalysts to produce 3D printed monoliths would provide additional benefits to enhance the DHBZ synthesis performance. Herein, 3D cellular Fe/γ-Al₂O₃ monoliths with a total porosity of 88% and low density (0.43 g·cm^-3) are printed by Robocasting from pseudoplastic Fe-metal-organic frameworks (Fe-MOF)-based aqueous boehmite inks to develop catalytic monoliths containing a Fe network of dispersed clusters (≤5 μm), nanoclusters (<50 nm), and nanoparticles (∼20 nm) into the porous ceramic skeleton. The hydroxylation of phenol in the presence of hydrogen peroxide is carried out at different reaction temperatures (65-85 °C) in a flow reactor filled with eight stacked 3D Fe/γ-Al₂O₃ monoliths and with the following operating conditions: C_phenol,0 = 0.33 M, C_phenol,0/C_H2O2,0 = 1:1 molar, W_R = 2.2 g, and space time (τ = W·Q_L^-1) = 0-147 g_cat·h·L^-1. The scaffolds present a good mechanical resistance (∼1 MPa) to be employed in a catalytic reactor and do not show any cracks or damage after the chemical reaction. DHBZ selectivity (S_DHBZ) of 100% with a yield (Y_DHBZ) of 32% due to the presence of the Fe network in the monoliths is reported at 85 °C, which represents an improved synthesis performance as compared to that obtained by using the conventional Enichem process and the well-known titanium silicalite-1 catalysts (S_DHBZ = 99.1% and Y_DHBZ = 29.6% at 80 °C). This printing strategy allows manufacturing novel 3D structured catalysts for the synthesis of critical chemical compounds with higher reaction efficiencies.

Hierarchical porous metal–organic gels and derived materials: from fundamentals to potential applications

This review summarizes recent progress in the development and applications of metal–organic gels (MOGs) and their hybrids and derivatives dividing them into subclasses and discussing their synthesis, design and structure–property relationship.

Proton-Conductive Cerium-Based Metal-Organic Frameworks

In this study, proton-conducting behaviors of a cerium-based metal-organic framework (MOF), Ce-MOF-808, its zirconium-based isostructural MOF, and bimetallic MOFs with various Zr-to-Ce ratios are investigated. The significantly increased proton conductivity (σ) and decreased activation energy (E_a) are obtained by substituting Zr with Ce in the nodes of MOF-808. Ce-MOF-808 achieves a σ of 4.4 × 10^-3 S/cm at 25 °C under 99% relative humidity and an E_a of 0.14 eV; this value is among the lowest-reported E_a of proton-conductive MOFs. Density functional theory calculations are utilized to probe the proton affinities of these MOFs. As the first study reporting the proton conduction in cerium-based MOFs, the finding here suggests that cerium-based MOFs should be a better platform for the design of proton conductors compared to the commonly reported zirconium-based MOFs in future studies on energy-related applications.

Group 4 Metal-Based Metal—Organic Frameworks for Chemical Sensors

Metal-organic frameworks (MOFs) have attracted great attention for their applications in chemical sensors mainly due to their high porosity resulting in high density of spatially accessible active sites, which can interact with the aimed analyte. Among various MOFs, frameworks constructed from group 4 metal-based (e.g., zirconium, titanium, hafnium, and cerium) MOFs, have become especially of interest for the sensors requiring the operations in aqueous media owing to their remarkable chemical stability in water. Research efforts have been made to utilize these group 4 metal-based MOFs in chemosensors such as luminescent sensors, colorimetric sensors, electrochemical sensors, and resistive sensors for a range of analytes since 2013. Though several studies in this subfield have been published especially over the past 3–5 years, some challenges and concerns are still there and sometimes they might be overlooked. In this review, we aim to highlight the recent progress in the use of group 4 metal-based MOFs in chemical sensors, and focus on the challenges, potential concerns, and opportunities in future studies regarding the developments of such chemically robust MOFs for sensing applications.

Black Phosphorus Nanosheet Encapsulated by Zeolitic Imidazole Framework-8 for Tumor Multimodal Treatments

Black phosphorus (BP) nanosheet is easily oxidized by oxygen and water under ambient environment, thus, reliable BP passivation techniques for biomedical applications is urgently needed. A simple and applicable passivation strategy for biomedical applications was established by encapsulating BP nanosheet into zeolitic imidazole framework-8 (ZIF-8). The resulted BP nanosheet in ZIF-8 (BP@ZIF-8) shows not only satisfied chemical stability in both water and phosphate buffered saline (PBS), but also excellent biocompatibility. Notably, BP nanosheet endows the prepared BP@ZIF-8 with prominent photothermal conversion efficiency (31.90%). Besides passivation BP, ZIF-8 provides the BP@ZIF-8 with high drug loading amount (1353.3 mg g^-1). Moreover, the loaded drug can be controlled release by pH stimuli. Both in vitro and in vivo researches verified the resulted BP@ZIF-8 an ideal candidate for tumor multimodal treatments.

Mixed Solvent Method for Improving the Size Uniformity and Cargo-Loading Efficiency of ZIF-8 Nanoparticles

Zeolitic imidazolate framework-8 (ZIF-8) nanoparticles with tunable diameters and a uniform morphology were constructed in dimethyl sulfoxide (DMSO)/H₂O mixed solvents and were further decorated with dextran to improve their stability and biocompatibility. A series of reaction conditions, including the DMSO content in mixed solvents, molar ratio between precursors, growth time, and decoration of dextran, were systematically investigated. Most importantly, it was the union of DMSO and water that achieved the combined merits of both solvothermal and hydrothermal methods, namely, high uniformity and high efficiency, respectively. In addition, numerous properties of these ZIF-8 nanoparticles were subsequently studied, such as the crystal structure, surface properties, and porosity. Furthermore, composite ZIF-8 nanoparticles encapsulating various functional molecules were also successfully prepared in the same DMSO/H₂O mixed solvents, thus laying the foundation for their application as nanocarriers in the biomedical field.

Preliminary modelling as the first stage of targeted organic synthesis

The review aims to present a classification and applicability analysis of methods for preliminary molecular modelling for targeted organic, catalytic and biocatalytic synthesis. The following three main approaches are considered as a primary classification of the methods: modelling of the target – ligand coordination without structural information on both the target and the resulting complex; calculations based on experimentally obtained structural information about the target; and dynamic simulation of the target – ligand complex and the reaction mechanism with calculation of the free energy of the reaction. The review is meant for synthetic chemists to be used as a guide for building an algorithm for preliminary modelling and synthesis of structures with specified properties.

The bibliography includes 353 references.

Covalent-coordination tandem functionalization of a metal-organic framework (UiO-66) as a hybrid probe for luminescence detection of trans,trans-muconic acid as a biomarker of benzene and Fe3

By means of post-synthetic treatment on the UiO-66 derivative with -SO3H, a novel luminescent hybrid material named Tb3+@UiO-66-SO3H has been prepared simply and efficiently. Given its wonderful luminescence properties like intense green emission, a long lifetime, a robust structure and photostability, it is further developed as a fluorescent probe for the sensing of trans,trans-muconic acid (tt-MA, a biomarker of benzene) and Fe3+, which are closely related to human health. Notably, Tb3+@UiO-66-SO3H shows an outstanding recognition ability for Fe3+ among common cations with a low detection limit (0.11 μM, 0.006 ppm). More importantly, Tb3+@UiO-66-SO3H can realize highly sensitive and selective detection of tt-MA (detection limit, 0.58 μM, 0.083 ppm). Besides, this rapid response probe is facilely prepared, non-toxic and reusable, showing the potential of Tb3+@UiO-66-SO3H in the practical monitoring of tt-MA and Fe3+.

Cerium-Based Metal-Organic Framework Nanocrystals Interconnected by Carbon Nanotubes for Boosting Electrochemical Capacitor Performance

In this study, nanocrystals of a cerium-based metal-organic framework (Ce-MOF), Ce-MOF-808, are directly grown on the surface of carboxylic acid-functionalized carbon nanotubes (CNTs) by a facile one-step solvothermal synthesis method. Ce-MOF-CNT nanocomposites with various Ce-MOF-to-CNT ratios are synthesized, and their crystallinity, morphology, porosity, and electrical conductivity are examined. The redox-hopping and electrochemical behaviors of the pristine Ce-MOF in aqueous electrolytes are investigated, suggesting that the pristine Ce-MOF is electrochemically active but possesses a limited charge-transport behavior. As a demonstration, all the Ce-MOF, CNT, and nanocomposites are used as active materials for application in aqueous-based supercapacitors. The capacitive performance of the CNT can be significantly boosted with the help of redox-active Ce-MOF-808 nanocrystals.

Microstructural and rheological investigation of upcycled metal-organic frameworks stabilized Pickering emulsions

HYPOTHESIS

Stabilizing Pickering emulsions with metal-organic frameworks (MOFs) is a known way to incorporate them into hierarchically porous materials. Studies generally focus on their final properties and emulsion microstructures are rarely precisely described. Our hypothesis was that characterizing the microstructural and rheological properties of Pickering emulsions stabilized solely by Al-based MOFs (MIL-96) particles would provide insights into how to control their stability and workability for potential industrial applications.

EXPERIMENTS

MIL-96(Al) particles, obtained from Li-ion battery waste were used to stabilize paraffin-in-water Pickering emulsions. The influence of the formulation parameters (paraffin/water volume ratio and MIL-96(Al) content) were investigated and the emulsions were analysed using optical microscopy, cryo-scanning electron microscopy and rheological measurements.

FINDINGS

MIL-96(Al) efficiently stabilized paraffin-in-water emulsions with up to 80% of internal phase. The emulsions with a low paraffin volume fraction had large droplets and a fluid gel-like texture. The emulsions with higher paraffin volume fractions were more compact and had two-step flow curves. In this system, excess MIL-96(Al) particles aggregated in the continuous phase as flocs interact with particles adsorbed at the paraffin-water interface, creating a secondary network that has to be broken for flow to resume. This behaviour may be interesting to investigate in other MOF-stabilized emulsions.

pH response of a hydroxyl-functionalized luminescent metal–organic framework based phosphor

The ligand sensitized Tb³⁺ centered emission of Tb-doped Y-based hydroxyl functionalized MOFs has been utilized for pH sensing in the visible range.

A multi-responsive MOF-based fluorescent probe for detecting Fe3+, Cr2O72− and acetylacetone

A novel ZnII-based MOF can selectively and sensitively recognize Fe3+, Cr2O72− and acetylacetone, simultaneously.

The role of metal–organic porous frameworks in dual catalysis

Metal–organic frameworks (MOFs) are a valuable group of porous crystalline solids with inorganic and organic parts that can be used in dual catalysis.

Beyond Frameworks: Structuring Reticular Materials across Nano-, Meso-, and Bulk Regimes

Reticular materials are of high interest for diverse applications, ranging from catalysis and separation to gas storage and drug delivery. These open, extended frameworks can be tailored to the intended application through crystal-structure design. Implementing these materials in application settings, however, requires structuring beyond their lattices, to interface the functionality at the molecular level effectively with the macroscopic world. To overcome this barrier, efforts in expressing structural control across molecular, nano-, meso-, and bulk regimes is the essential next step. In this Review, we give an overview of recent advances in using self-assembly as well as externally controlled tools to manufacture reticular materials over all the length scales. We predict that major research advances in deploying these two approaches will facilitate the use of reticular materials in addressing major needs of society.

New Promises and Opportunities in 3D Printable Inks Based on Coordination Compounds for the Creation of Objects with Multiple Applications

This review focuses on the usefulness of coordination bonds to create 3D printable inks and shows how the union of chemistry and 3D technology contributes to new scientific advances, by allowing amorphous or polycrystalline solids to be transformed into objects with the desired shape for successful applications. The review clearly shows how there has been considerable increase in the manufacture of objects based on the combination of organic matrices and coordination compounds. These coordination compounds are usually homogeneously dispersed within the matrix, anchored onto a proper support or coating the printed object, without destroying their unique properties. Advances are so rapid that today it is already possible to 3D print objects made exclusively from coordination compounds without additives. The new printable inks are made mainly with nanoscale nonporous coordination polymers, metal-organic gels, or metal-organic frameworks. The highly dynamic coordination bond allows the creation of objects, which respond to stimuli, that can act as sensors and be used for drug delivery. In addition, the combination of metal-organic frameworks with 3D printing allows the adsorption or selective capacity of the object to be increased, relative to that of the original compound, which is useful in energy storage, gas separation, or water pollutant elimination. Furthermore, the presence of the metal ion can give them new properties, such as luminescence, that are useful for application in sensors or anticounterfeiting. Technological advances, the combination of various printing techniques, and the properties of coordination bonds lead to the creation of surprising, new, printable inks and objects with highly complex shapes that will close the gap between academia and industry for research into coordination compounds.

Two-dimensional metal organic frameworks for biomedical applications

Two-dimensional (2D) metal organic frameworks (MOFs), are an emerging class of layered nanomaterials with well-defined structure and modular composition. The unique pore structure, high flexibility, tunability, and ability to introduce desired functionality within the structural framework, have led to potential use of MOFs in biomedical applications. This article critically reviews the application of 2D MOFs for therapeutic delivery, tissue engineering, bioimaging, and biosensing. Further, discussion on the challenges and strategies in next generation of 2D MOFs are also included. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Chiral Macroporous MOF Surfaces for Electroassisted Enantioselective Adsorption and Separation

The development of surfaces with chiral features is a fascinating challenge for modern materials science, especially when they are used for chiral separation technologies. In this contribution, the design of hierarchically structured chiral macroporous zeolitic imidazolate framework-8 (ZIF-8) electrodes is presented. They are elaborated by an electrochemical deposition-dissolution technique based on the electrodeposition of metal through a colloidal crystal template, followed by controlled electrooxidation. This generates locally metal cations, which can interact with a chiral ligand present in the solution to form metal-organic frameworks (MOFs). The macroporous structure facilitates the access of the chiral recognition sites, located in the mesoporous MOF, and thus helps to overcome mass transport limitations. The efficiency of the designed functional materials for chiral adsorption and separation can be fine-tuned by applying an adjustable electric potential to the electrode surfaces. This hierarchical chiral ZIF-8 structure was deposited at the walls of a microfluidic device and used as a stationary phase for enantioselective separation. The potential-controlled interaction between the stationary phase and the chiral analytes allows baseline separation of two enantiomers. This opens up interesting perspectives for using hierarchically structured chiral MOFs as an efficient material for the selective adsorption and separation of chiral compounds.

Recent advances in the shaping of metal–organic frameworks

In this review, the recent advances in the shaping of MOFs are overviewed, and some promising strategies recently developed are highlighted, including templated shaping, self-shaping, shaping on substrates, and shaping with sacrificial materials.