l-Leucine-Based Poly(ester urea)s for Vascular Tissue Engineering

Synthesis and Oxidative Degradation of Leucine-Based Poly(diacylhydrazine)

Diacylhydrazine is thermally and chemically stable, and it remains inert to oxygen even at high temperatures. However, it is rapidly oxidized by sodium hypochlorite, leading to its decomposition into carboxylic acid and nitrogen gas. In the synthesis of a novel poly(diacylhydrazine) as an oxidatively degradable polymer, L-leucine methyl ester is acylated by terephthaloyl chloride. Subsequent hydrazination yields a bishydrazide monomer. The oxidative coupling polymerization of this monomer produces poly(diacylhydrazine). The molecular structures of the products are confirmed by an 1H NMR analysis. A polymodal molecular weight distribution and a large polydispersity index are observed by GPC in all cases. A 10% weight loss temperature is noted at 286 °C in air by TGA. The obtained polymer is not oxidized by oxygen. No glass transition is observed below the decomposition temperature. Upon the treatment of the poly(diacylhydrazine) with sodium hypochlorite solution, decomposition occurs rapidly, resulting in monomeric carboxylic acid and nitrogen gas. The L-leucine-based poly(diacylhydrazine) serves as a novel on-demand degradable polymer with high levels of thermal and chemical stability during usage.

Calcium Trimetaphosphate-Loaded Electrospun Poly(Ester Urea) Nanofibers for Periodontal Tissue Engineering

The objective of this research was to create and appraise biodegradable polymer-based nanofibers containing distinct concentrations of calcium trimetaphosphate (Ca-TMP) for periodontal tissue engineering. Poly(ester urea) (PEU) (5% w/v) solutions containing Ca-TMP (15%, 30%, 45% w/w) were electrospun into fibrous scaffolds. The fibers were evaluated using SEM, EDS, TGA, FTIR, XRD, and mechanical tests. Degradation rate, swelling ratio, and calcium release were also evaluated. Cell/Ca-TMP and cell/scaffold interaction were assessed using stem cells from human exfoliated deciduous teeth (SHEDs) for cell viability, adhesion, and alkaline phosphatase (ALP) activity. Analysis of variance (ANOVA) and post-hoc tests were used (α = 0.05). The PEU and PEU/Ca-TMP-based membranes presented fiber diameters at 469 nm and 414-672 nm, respectively. Chemical characterization attested to the Ca-TMP incorporation into the fibers. Adding Ca-TMP led to higher degradation stability and lower dimensional variation than the pure PEU fibers; however, similar mechanical characteristics were observed. Minimal calcium was released after 21 days of incubation in a lipase-enriched solution. Ca-TMP extracts enhanced cell viability and ALP activity, although no differences were found between the scaffold groups. Overall, Ca-TMP was effectively incorporated into the PEU fibers without compromising the morphological properties but did not promote significant cell function.

Effects of the interactions between platelets with other cells in tumor growth and progression

It has been confirmed that platelets play a key role in tumorigenesis. Tumor-activated platelets can recruit blood cells and immune cells to migrate, establish an inflammatory tumor microenvironment at the sites of primary and metastatic tumors. On the other hand, they can also promote the differentiation of mesenchymal cells, which can accelerate the proliferation, genesis and migration of blood vessels. The role of platelets in tumors has been well studied. However, a growing number of studies suggest that interactions between platelets and immune cells (e.g., dendritic cells, natural killer cells, monocytes, and red blood cells) also play an important role in tumorigenesis and tumor development. In this review, we summarize the major cells that are closely associated with platelets and discuss the essential role of the interaction between platelets with these cells in tumorigenesis and tumor development.

Tunable shape memory properties of highly stretchable poly(ester urea) random copolymers based on α-amino acids

The exploration of biodegradable polymers with shape memory effects (SMEs) holds great promise in biomedical fields. Revealing the relationship between the SMEs and polymer structures not only contributes to interpreting the SME mechanisms, but also prompts the customization of materials properties for specific requirements. Herein, we developed a series of poly(ester urea) (PEU) random copolymers composed of two different diamine monomers based on L-alanine and L-valine, respectively. It was shown that the shape memory performance of the PEU copolymers strongly depended on the composition of two different diamine monomers in the PEU copolymers and other physical properties. This tunability likely arose from the change of polymer chain mobility and crystallinity, which were impacted by the choice of α-amino acids. Intriguingly, thin films of the PEU copolymers exhibited a high strain at break of 347-743% around the physiological temperature (35 °C). Moreover, the random copolymerization of two different sorts of diamine monomers has been demonstrated as a facile approach to precisely tailor the physical properties of the PEUs according to custom needs.

Decellularized Scaffold-based Poly(ethylene glycol) Biomimetic Vascular Patches Modified with Polyelectrolyte Multilayer of Heparin and Chitosan: Preparation and Vascular Tissue Engineering Applications in a Porcine Model

The mechanical property mismatch between vascular patches and native blood vessels can result in post-operation failure, so it is important to develop vascular patches that mimic the biomechanical properties of...

Phenylalanine-based poly(ester urea)s composite films with nitric oxide-releasing capability for anti-biofilm and infected wound healing applications

Infected wounds show delayed and incomplete healing processes and even render patients at a high risk of death due to the formed bacterial biofilms in the wound site, which protect bacteria against antimicrobial treatments and immune response. Nitric oxide based therapy is considered a promising strategy for eliminating biofilms and enhancing wound healing, which encounters a significant challenge of controlling the NO release behavior at the wound site. Herein, a kind of phenylalanine based poly(ester urea)s with high thermal stability are synthesized and fabricated to electrospun films as NO loading vehicle for infected wound treatment. The resultant films can continuously and stably release nitric oxide for 360 h with a total concentration of 1.15 μmol L^-1, which presents obvious advantages in killing the bacteria and removing biofilms. The results exhibit the films have no cytotoxicity and may accelerate the wound repair without causing inflammation, hemolysis, or cytotoxic reactions as well as stimulate the proliferation of fibroblasts and increase the synthesis of collagen. Therefore, the films may be a suitable NO releasing dressing for removing biofilms and repairing infected wounds.

β-Methyl-δ-valerolactone-containing Thermoplastic Poly(ester-amide)s: Synthesis, Mechanical Properties, and Degradation Behavior

Poly(ester-amide)s (PEAs) have been prepared from (glucose-derived) β-methyl-δ-valerolactone (MVL) by reaction of MVL-derived diamidodiols with diacid chlorides in solution to form poly(ester-amide)s having alternating diester-diamide subunits. The PEAs formed by this method exhibit plastic properties and are of sufficiently high molecular weight to be tough, ductile materials (stress at break: 41-53 MPa, strain at break: 530-640%). The length of the methylene linker unit (n = 1,2,3) between amide groups of the diamidodiols affects the Young's modulus; longer linkers reduce the stiffness of the materials. This allows tuning of the properties by judicious choice of precursors. MVL was also converted to a diacid chloride that was then used to prepare a PEA that is 76 wt% MVL-derived. The degradation rates of suspensions of these new PEAs in basic aqueous media were benchmarked and their instability in aqueous acid was also observed. NMR studies were used to detect the hydrolytic degradation products of both these PEAs as well as a structurally simpler analog.

Controlled release of etoricoxib from poly(ester urea) films for post-operative pain management

Medical prescriptions for the alleviation of post-surgical pain are the most abundant source of opioids in circulation. As a systemic drug delivery source, opioids leave patients at high risk for side effects after being dosed. Given the significant rate of unauthorized use, distribution, addiction, and opioid related deaths, an alternative method of post-surgical analgesia is needed. Herein, we report the use of bio-resorbable poly(ester urea) (PEU) films that controllably deliver a non-opioid COX-2 inhibitor, etoricoxib, in vivo and in vitro as a model system for post-surgical pain control. PEU composition, drug-load, and film thickness were varied to selectively control etoricoxib elution. Elution data were fit to a Higuchi model, and the diffusion constant of etoricoxib was calculated in each of the films. Pharmacokinetic (pK) data from an in vivo rat model showed the local tissue concentration of etoricoxib at the study endpoint to be up to 23-fold higher in tissue then plasma. In a well-established mouse model of diabetic neuropathic pain in vivo film implantation showed effective relief of pain for more than 4 days post-implantation and efficacious local etoricoxib delivery. Overall, implementation of local drug delivery systems such as this could reduce the need for opioid prescriptions associated with current pain management strategies.

Poly(ester urea)-Based Adhesives: Improved Deployment and Adhesion by Incorporation of Poly(propylene glycol) Segments

The adhesive nature of mussels arises from the catechol moiety in the 3,4-dihydroxyphenylalanine (DOPA) amino acid, one of the many proteins that contribute to the unique adhesion properties of mussels. Inspired by these properties, many biomimetic adhesives have been developed over the past few years in an attempt to replace adhesives such as fibrin, cyanoacrylate, and epoxy glues. In the present work, we synthesized ethanol soluble but water insoluble catechol functionalized poly(ester urea) random copolymers that help facilitate delivery and adhesion in wet environments. Poly(propylene glycol) units incorporated into the polymer backbone impart ethanol solubility to these polymers, making them clinically relevant. A catechol to cross-linker ratio of 10:1 with a curing time of 4 h exceeded the performance of commercial fibrin glue (4.8 ± 1.4 kPa) with adhesion strength of 10.6 ± 2.1 kPa. These adhesion strengths are significant with the consideration that the adhesion studies were performed under wet conditions.

α-Amino Acid-Based Poly(Ester urea)s as Multishape Memory Polymers for Biomedical Applications

The thermal shape memory behavior of a series of α-amino acid-based poly(ester urea)s has been explored. We demonstrate that these materials exhibit excellent shape memory performance in dual- and triple-shape thermomechanical testing. Significant activation of chain mobility above the T_g as well as a hydrogen bonding network provide the basis for shape transformations and recovery. Additionally, we tuned the shape memory properties of these materials with polymer blending, enabling the demonstration of quadruple-shape memory cycles.

Pilot Mouse Study of 1 mm Inner Diameter (ID) Vascular Graft Using Electrospun Poly(ester urea) Nanofibers

An off-the-shelf, small diameter tissue engineered vascular graft (TEVG) would be transformative to surgeons in multiple subspecialties. Herein, the results of a small diameter (ID ≈ 1 mm) vascular graft constructed from resorbable, amino acid-based poly(ester urea) (PEU) are reported. Electrospun PEU grafts of two different wall thicknesses (type A: 250 μm; type B: 350 μm) are implanted as abdominal infra-renal aortic grafts in a severe combined immune deficient/beige mouse model and evaluated for vessel remodeling over one year. Significantly, the small diameter TEVG does not rupture or lead to acute thrombogenic events during the intervals tested. The pilot TEVG in vivo shows long-term patency and extensive tissue remodeling with type A grafts. Extensive tissue remodeling in type A grafts leads to the development of well-circumscribed neovessels with an endothelial inner lining, a neointima containing smooth muscle cells. However, due to slow degradation of the PEU scaffold materials in vivo, the grafts remain after one year. The type B grafts, which have 350 μm thick walls, experience occlusion over the one year interval due to intimal hyperplasia. This study affords significant findings that will guide the design of future generations of small diameter vascular grafts.